Search Results

Search found 5712 results on 229 pages for 'card'.

Page 63/229 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Upgrade to 11.10 caused rt2800usb module to be blacklisted

  - by Shevek

  I just upgraded from Kubuntu 11.04 to 11.10, and I noticed that after the upgrade my USB wireless card was no longer recognized. It turns out that the rt2800usb module had been added (automatically, I assume, unless previously the module had been loading despite being blacklisted) to /etc/modprobe.d/blacklist.conf. I re-enabled the wireless card by commenting out the blacklist line and adding rt2800usb to /etc/modules, but I was wondering if there was a reason for rt2800usb being added to the blacklist.

  Read the article

• Screen blink twice every 10 seconds on ubuntu 12.04

  - by Erik

  On 12.04 64-bit, about every 5 seconds my screen blinks twice. Even during installation of Ubuntu from CD, this happens during the complete process. I had no problems with earlier Ubuntu versions (earlier version was 10.04LTS 64-bit) System specs: I7-2600K MSI 7681 Motherboard 16 GB RAM 2 x Nvidia 560 card SLI (only 1 screen on 1 card active during install process) This flickering is driving me crazy, please help.

  Read the article

• Drivers for Sony Ericsson Phones

  - by user93671

  I'm trying to locate a driver to access my memory card inside my Sony Ericsson Walkman phone. I have 12.04 and it doesn't seem to recognize it. Ideally I would like to install the entire PC Suite that came with the phone, but I'll just settle to access the memory card so I can add music when I need too. I tried using mass storage mode, media transfer, phone mode, even print mode and still nothing.

  Read the article

• Accidentally deleted /etc/X11/xorg.conf.original, and now login no longer works

  - by Cester Nilap

  I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

  Read the article

• How to make Google SketchUp work with Intel graphics in Wine?

  - by haltman

  Hi, everybody! My pc has an Intel DH57JG mainboard, I've installed wine, launching sketchup I receive error that I don't have OpenGL installed, is there a way to configure/install it? On my previous pc with an NVidia video card installing official NVidia driver resolved it. Is there is a way to do the same with the Intel card? Running locate libgl on a terminal returns no results. thanks in advance.

  Read the article

• Which driver should I use with a 9600 GT Mobile?

  - by lisalisa

  I checked the Additional Drivers offered for my card and I saw four options: NVIDIA accelerated graphics drivers (version 173) NVIDIA accelerated graphics drivers (post-release updates) (version 173-updates) NVIDIA accelerated graphics drivers (version current) (Recommended) NVIDIA accelerated graphics drivers (post-release updates)(version current-updates) I'm not sure which one to pick. I want a driver that's stable but also takes advantage of my card's hardware.

  Read the article

• Nvidia problem after inappropriate shut down

  - by bhappy

  Hi, After by battery died on my laptop I started my computer after plugging it to the ac adapter, for no reason that I know I cant use the visual effects any more as if my graphic card is not installed (my graphic card is GeForce 300m and nvidia x-settings is working) I tried generating a new xorg.conf file but nothing happened I marked all the installed nvidia driver in synaptic for re installation and didn't really help I googled the problem appears to be popular but couldn't find a solid solution Any Ideas ?

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

• Screen going blank

  - by Deena

  When I am watching videos via VLC or watching videos in Firefox - even when I simply click DASH HOME - Screen goes blank - nothing working - I needed to restart to recover. Not sure which is causing this issue. Is it because of Graphics Card problem - Not installed any proprietary drivers. OS : Ubuntu 12.04 Graphics Card : 1 GB - [AMD/ATI] RV710 [Radeon HD 4350/4550] Could you help me on this. Regards, Deena

  Read the article

• My sound is not working

  - by gkhan

  I am not able to hear any sound. Does anyone have a clue how to proceed in fixing this? Issuing aplay gives this $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Running crysis 2 on ubuntu gives me an error message

  - by ShajD

  so i recently installed ubuntu alongside windows 7 and i installed crysis 2 with wine. crysis 2 works fine when i run windows, however when i run it using wine in ubuntu cryengine gives me a message saying, "Unsupported video card detected! Continuing to run migth lead to unexpected results or crashes....." i've got two video cards ones an intel and the other's a nvidia. i typed lspci into the terminal and my nvidia card was listed under video controller as well

  Read the article

• update manager has killed wifi after i finally got it working [closed]

  - by Bobble Off

  HI i had just got my wifi to work properly in 12.04 and I got a pop up from update manager saying there was 100's of updates I needed to install so i installed them it then said I needed to reboot which I did but now my wifi isn't working I go add a new connection and I have no wifi option just Ethernet also the pci card is showing no signs of life (the green light is not light) but when i go in to terminal and type lspci it is showing my wifi card in the list whats gone wrong and how do i fix it???

  Read the article

• In a GUI based Application in Linux It is working properly in some systems,But segmentation fault (Because of SIGSEGV signal) is coming in others.Why? [closed]

  - by Sreejith

  The application consists of Driver code,a Source Object file(.so) ,and a Application code to interact with a hardware Card.. The problem comes in a mmap().It reads address from a card. But it is not getting the correct address in some systems.The Error is because of It is receiving a SIGSEGV signal and segmentation fault followed to that.But in some system which having the same version of kernel is not at all facing the problem and working properly. So please any one suggest the Reason and Remedy for this Problem.

  Read the article

• Unity does not start after installing the fglrx drivers on 12.10 [closed]

  - by f.mcleash

  I installed Ubuntu 12.10 and at first when I go to check the system information I used to have (unknown) on the graphic card section, I used the synaptic manager and downloaded the fglrx, after that I restarted my laptop and now I don't have any menus, all of them are gone. Now I am only using the keyboard shortcuts to use Ubuntu. My graphic card is AMD ATI. What can I do to bring the menus back?

  Read the article

• so disappointed at ubuntu 12.04 [closed]

  - by Min

  it's been almost a month I've installed ubuntu I can't afford windows cd anymore it is my fault that I didn't dual boot it but, it doesn't make sense in that I can't use my own graphic card in my own computer because certain company doesn't support the driver card for the OS it is seemingly ridiculous that I can't even run a simple 2d game or not even a flash game with this OS a video of 480 and up doesn't run for closely a month I've tried my best to run everything my computer spec provides, but nothing works. not even sound quality

  Read the article

• Routing Internet traffic over specific network interfaces [on hold]

  - by dipamchang

  I want to route my internet traffic over all my available connections (like LAN and Data card(3G)), based on conditions like, if a website is blocked over LAN, that traffic goes through Data Card (or other available internet connection). My ultimate motive is to integrate this feature in my web browser which I have already built using C# and .Net framework. I have found that one can add a route by using the following cmd command - route add DestinationIP mask subnet InterfaceGatewayIP but I am stuck as to how should it be implemented using C#?

  Read the article

• multiple monitor, ATI EyeFinity vs NVidia Mosaic on HDMI

  - by user1531897

  i have been googling much for answer but only someone with real experience can help here. my aim is to have 5 monitors connected to one computer in 2x2 full screen on all 4 monitors (video wall) with same resolution, 4xfullHD for example, plus one -5th monitor as controling. Ati have example picture of this configuration here. I have no gaming nor 3d needs here. Simple desktop applications plus video streams. So because graphic cards for this are expensive, i need to find out before buying pros and cons of 2 possible solutions (1) Ati Eyefinity capable card(s) ...and (2) Nvidia Quadro/NVS card(s) with mosaic and/or nvidia surround technology. For example i can find that current good cards for this can be: Ati's 7870 eyefinity6 card, link here pros: one card can handle all 5 displays, cons: active DP adapters needed (sometimes with aditional usb-powering complication) Nvidia Qudro NVS 450, link here Both cards have DisplayPorts as outputs (my targets are HDMI displays), but as far i saw information is that Eyefinity needs "active DP-DVI/hdmi adapters" for outputs and they are little expensive...? Does nvidia have this limitation (active adapters) ??? And final question, is Ati Eyefinity still better for this purpose than Nvidia-mosaic by someone's real experience there.

  Read the article

• Audio Static/Interference regardless of audio interface?

  - by Tom

  I currently am running a media center/server on a Lubuntu machine. The machine specs: Core 2 Duo Extreme EVGA SLI 680i MotherBoard 2 GB DDR2 Ram 3 Hard Drives no raid - WD Caviar Black, Green, and Samsung Spinpoint Galaxy GTX 220 1GB External USB Creative XI-FI Extreme Card 550W Power Supply This machine is hooked up through an optical cable to an ONKYO HTR340 Receiver through the XIFI card. Whenever I play any audio regardless if it is through XBMC, the default audio player, a flash video, etc, I get a horrible static sound that randomly gets louder. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 This static comes in randomly, sometimes going away for short periods, but eventually always comes back. So far I have tried everything I could think of: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Pretty much everything short of swapping the CPU. I haven't been able to narrow down the problem and it is getting frustrating. Is it possible that the CPU is faulty and might cause a problem such as this, or that the PC case is shorting out the motherboard? Any kind of suggestions will be appreciated.

  Read the article

• How to use connectify to share files between 2 laptops, one running Windows 7?

  - by p2pnode

  I have 2 laptops one running XP and another Windows 7. Both have WiFi-card installed. I want to be able to share files between these 2 machines and then in next step also be able to share internet connection. I have heard that Connectify on Windows 7 is a very handy and easy tool to set up a hotspot and other machines even XP,Vista can connect to this host hotspot and share files and internet connection. I am able to search for the network (set on host) on my client machine. But how to share files? I don't see any such menu or anything. Also after I have installed connectify on Windows 7, I am not able to connect to internet using data card. It throws error that "Error 31:A A device attached to the system is not functioning". And on client machine, if I connect to data card, as well as connect to wireless network setup by host machine, I no longer am able to access internet, even though the data card is connected. The browser throws error: Please help. Any other utility similar to connectify etc?

  Read the article

• Configuring WPA WiFi in Ubuntu 10.10

  - by sma

  I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

  Read the article

• LTO 2 tape performance in LTO 3 drive

  - by hmallett

  I have a pile of LTO 2 tapes, and both an LTO 2 drive (HP Ultrium 460e), and an autoloader with an LTO 3 drive in (Tandberg T24 autoloader, with a HP drive). Performance of the LTO 2 tapes in the LTO 2 drive is adequate and consistent. HP L&TT tells me that the tapes can be read and written at 64 MB/s, which seems in line with the performance specifications of the drive. When I perform a backup (over the network) using Symantec Backup Exec, I get about 1700 MB/min backup and verify speeds, which is slower, but still adequate. Performance of the LTO 2 tapes in the LTO 3 drive in the autoloader is a different story. HP L&TT tells me that the tapes can be read at 82 MB/s and written at 49 MB/s, which seems unusual at the write speed drop, but not the end of the world. When I perform a backup (over the network) using Symantec Backup Exec though, I get about 331 MB/min backup speed and 205 MB/min verify speeds, which is not only much slower, but also much slower for reads than for writes. Notes: The comparison testing was done on the same server, SCSI card and SCSI cable, with the same backup data set and the same tape each time. The tape and drives are error-free (according to HP L&TT and Backup Exec). The SCSI card is a U160 card, which is not normally recommended for LTO 3, but we're not writing to LTO 3 tapes at LTO 3 speeds, and a U320 SCSI card is not available to me at the moment. As I'm scratching my head to determine the reason for the performance drop, my first question is: While LTO drives can write to the previous generation LTO tapes, does doing so normally incur a performance penalty?

  Read the article

• linux mint VIA sound issue

  - by user2699451

  So I installed linux Mint 15 "Olivia" 64 bit on my Mecer W550EU laptop I have HD Audio with a VIA chipset charles-W55xEU charles # lsmod | grep snd snd_hda_codec_hdmi 36913 1 snd_hda_codec_via 51018 1 snd_hda_intel 39619 5 snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 97451 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 19 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device soundcore 12680 1 snd And my sound card charles-W55xEU charles # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: VT1802 HP [VT1802 HP] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 and my audio device charles-W55xEU charles # lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High `Definition Audio Controller (rev 04)` Subsystem: CLEVO/KAPOK Computer Device 0550 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7c10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Sometimes when I boot up, soundworks, other times it doenst, it is completely random, so far, no-one on xchat linux help or linux mint forums was able to help me, I have always had issues with sound on VIA chipsets I have: sudo apt-get upgrade && apt-get install mint-meta-cinnamon it seemed to help but after 2-3 reboots, the problem came back, btw, everytime I checked, pulse audio is selected to Duplex Audio Input & Output and alsa mixer is always unmuted!

  Read the article

• LG W3000H-BN monitor cannot go above 1280x800

  - by Jo Profit

  I noticed that there are many people complaining about this issue with the W3000H but I have yet to find a solution that works for me. I am using Windows 7 Professional and and using a nVidia Quadro NVS 240 video card with a 4 monitor splitter cable. The cable from the monitor and the splitter are rated DVI-D Dual Link and the video card itself is rated for 2560x1600. I have installed the latest drivers for the video card and just grabbed the .inf, icm and cat file from the LG website and manually installed the monitor drivers. Does anyone have problems with the same setup? I have 3 other monitors (2 at 1920x1080 and 1 at 1280x1024). I really would like to be able to display the full resolution or else the large screen is useless. (I triple checked that the monitor itself supports this resolution). So monitor, cable, splitter and card supposedly support 2560x1600. Drivers are up to date but I cannot select that resolution when in the "Screen Resolution" menu, nor through the nVidia control panel. Please save me from madness :)

  Read the article

• Constant crashes in windows 7 64bit when playing games

  - by yx

  I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

  Read the article

• NVIDIA Tesla K20C in Dell PowerEdge R720xd --- power cables

  - by CptSupermrkt

  I am trying to put an NVIDIA Tesla K20C into a Dell PowerEdge R720xd. I'm having a bit of trouble understanding the power requirements of the card. First, here is a picture of two pages of the same manual, which seems contradictory to me. One page says only a single connector is required, while the next page says both are required. The entire manual for the card can be found here: http://www.nvidia.com/content/PDF/kepler/Tesla-K20-Active-BD-06499-001-v02.pdf Here is an photo taken of the power connections on the card: And here is a photo of where those connectors need to go, onto the PCI-E riser of the r720xd: Neither the R720xd NOR the GPU came with the necessary cables. And given what appears to be a contradiction in the GPU manual (above), I'm not even sure at this point what we actually need. I have searched high and low online for things like 2x6 pin PCI-E to 8 pin male-to-male and so on, and for the life of me cannot find what we need. In case anyone needs it, the owner's manual of the R720xd can be found here: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r720xd_Owner%27s%20Manual_en-us.pdf The relevant page is page 68, which clearly indicates that the 8-pin female port on the riser card is for a GPU. The bottom line question: exactly what power cables do we need to buy, and where can we find them?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >