Search Results

Search found 4893 results on 196 pages for 'expect'.

Page 63/196 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Storage sizing for virtual machines

  - by njo

  I am currently doing research to determine the consolidation ratio my company could expect should we start using a virtualization platform. I find myself continually running into a dead end when researching how to translate observed performance (weeks of perfmon data) to hdd array requirements for a virtualization server. I am familiar with the concept of IOPs, but they seem to be an overly simplistic measurement that fails to take into account cache, write combining, etc. Is there a seminal work on storage array performance analysis that I'm missing? This seems like an area where hearsay and 'black magic' have taken over for cold, hard fact.

  Read the article

• Lenovo N100 and Samsung SSD 830, shouldn't this go faster than 100MB/s?

  - by Jook

  I recently upgrated my Lenovo N100 0768 with a Samsung SSD 830 - specified to support 520 MB/s read and 320MB/s write. However, having only SATA1 with max. of 150MB/s speed, it has to run in a slower mode - of course. But, shouldn't it be more on the edge of this limit than ranging between 90-115MB/s and averaging around 103MB/s? Or is this really as much as I can expect? Tested with HD-Tach. Has anyone comparable results on a SATA1 controller with a SSD drive faster than SATA1? Preferably similar to the Samsung 830?

  Read the article

• Specific apache + mysql settings for a light-weight site

  - by Good Person

  I have a small website with a Joomla and a Moodle set up. It seems that both of these are very slow. The server (CentOS release 5.5 (Final)) is a virtual dedicated server with about 2GB of ram. I don't expect to ever get more than 10-15 people on at the same time (and if that is high) What settings could I change in either apache, mysql, or even the OS to increase the performance of my site? I'm not concerned about running out of resources if I get too many visitors. If you need more specific data leave a comment and I'll edit the question.

  Read the article

• is there a linux equivalent of iTerm(mac) sending command to multiple tabs functionality?

  - by jabbertalker

  in iTerm, you can send a command to execute simultaneously on a set of already opened tabs. Is there a way to do this in linux (with gnome-terminal preferably)? for instance, supposed that I had 10 tabs already ssh'd into [email protected] and sudoed to root and wanted to send a command to run on all 10 tabs. The goal of this is to be able to stay within a set of tabs and command them, rather than having to use expect scripts to ssh and elevate and run commands. Basically, like how you could do in iTerm.

  Read the article

• Setting correct Content-Type sent from Wordpress, on Apache server

  - by eoinoc

  I need help pointing me in the right direction for setting the ContentType returned by Apache for content produced by WordPress. I'm having trouble figuring out why WordPress is returning incorrect headers. Issue The specific problem is that our Wordpress blog pages are being downloaded as a file rather than displayed by Internet Explorer and Chrome v21. Content-Type: application/x-gzip is being returned by the server. I'm told that I should expect Content-Type: text/html. Background The URL is http://www.bitesizeirishgaelic.com/blog/.

  Read the article

• OSX : Setup for filestorage in medium business

  - by Franatique

  In our office every machine runs OSX. In search of an ideal storage and sharing solution we decided to let OSX Server handle all account information and auth requests whereas an 7TB QNAP provides NFS shares. All shares are published as mounts in the companywide LDAP. As it turns out, handling permissions in this situation is very clumsy (e.g. inherit permissions on newly created files). Unfortunately using NFS4 in combination with ACLs did not solve the problem. As a possible solution I set up a iSCSI connection between QNAP and the machine running OSX Server which in turn serves the LUN as AFP share. Permission handling works like a charm for this setup. Although I am a bit concerned about the performance of this setup. As we are a fast growing company we expect the solution to serve at least 100 clients while using files aprox. above 100MB each. Are there any known drawbacks of this solution?

  Read the article

• curl makes a site work externally once run locally (apache)

  - by Kyle_at_NU

  Currently when I visit mysite.mydomain.com external to the local network I get in the browser: This is the default web page for this server. Nothing to see here. This is not even the "It Work's" Apache page. Then if locally (Apache2 on Ubuntu Server 12.04 with curl installed ) type: curl mysite.mydomain.com I get the site I expect. Then the next time i visit the page externally I get the correct site. Has anyone seen this before? Tips/Suggestions?

  Read the article

• Windows 8.1 wants to format a USB stick with an unusual but valid GPT partitioning scheme, why?

  - by DonGar

  I have a USB stick formatted with GPT partitions. Some of the partitions are ext2, some are ext4, some are custom and funky. However, there is also a standard EFI partition, and a standard vfat partition. In Windows 7, both the EFI partition and the standard VFAT partition are visible and mount normally. But Windows 8.1 prompts to reformat the drive when it's inserted. I'm not surprised if Win 8 hides the EFI partition, but I didn't expect it to prompt for reformatting. I want to leave existing partitions alone, but have a VFAT partition that Windows 7, 8, and 8.1 will mount and display normally. Exactly how does Win 8 decide if a device needs to be formatted?

  Read the article

• Avoid putty ssh terminal to crash when disconnecting from server

  - by JBoy

  I'm connecting via ssh to a remote 'live' server where i have some bash scripts automated via the crontab, when an error happens in some of the automation scripts within the server, the connection to the server is killed, this is fine to me, but the problem is that Putty closes the entire window, which is a behavior i don't want. I have checked all around the web, unfortunately the putty site does not have a support page, but nothing. Under putty's option i have tried all the menus expanding all options, but still i cant find the right one, i would expect it to be under Windowbehaviour Do you have an advice? Thx

  Read the article

• Internet Explorer 9 about:tabs data location

  - by TheBlueSky

  Internet Explorer 9 about:Tabs page lists the most visited sites (or this is what it's supposed to do); however, it doesn't work as expected. I came to several occasions where: 1. the list doesn't display the sites that I visit often, 2. a recently visited page show up in the list 3. the list got reset or many sites removed from it if Internet Explorer was forcibly closed 4. and so on where does it store the information about the sites? And is it possible to hack the list and force to display the sites that you want/expect?

  Read the article

• How to unlock sa user in SQL Server 2012 if Windows Authentication doesn't work?

  - by Tony_Henrich

  I am logged in as an admin on the computer. For some reason I can't log into SQL Server 2012 which is running on the same machine. The SA user is locked out. SQL Server was installed when I was logged in into my company's domain. I am not logged into the domain when I try to log in to sql server. I don't know if this matters st all. However I expect to log using Windows authentication if I am in the administrator group?

  Read the article

• Best server for mailing application [closed]

  - by Cyber Junkie

  My application is similar to a reminder service that reminds users of events that they scheduled. I'm sending emails to users through a PHP script. I'm not sending one email to multiple recipients. Each recipient receives a different message. I plan to use cron jobs every minute and expect the application to send roughly 200 individual emails in 1 hour (for a small user base that may grow). I don't have hosting experience with this type of application. I plan to start on a shared host and move up in the future to vps or dedicated. Most shared hosts that I looked into allow 50-100 emails per hour with delays between mailings. Please kindly inform me what I should look for in web hosts for this kind of application.

  Read the article

• Is there a difference in page fault rates between CPU bound and I/O bound processes?

  - by user198864

  I was thinking, should there be any difference in expectation of the page fault rate on CPU-bound vs I/O bound processes? At first I thought maybe we could, since CPU-bound processes would likely be using more memory accesses per time quantum, so I expect it would move from locality to locality faster. At the same time, the CPU-bound process is probably given a larger working set... but this doesn't affect the fault overhead as it hits a new locality IF this wasn't pre-paged in. Is there actually any real difference in the page fault rates or am I just musing about something nonexistent? And if there is, how would it impact a real-world OS like linux?

  Read the article

• WIFI connection interfering with Windows Server 2003 Active Directory domain. (How to debug?)

  - by Vinko Vrsalovic

  RELATED: This question has led me to ask this one. I had to change our unnamed crappy ADSL router to a crappy Comtrend CT-5361 WiFi router, now every WiFi connection to the domain doesn't work correctly: Joining the domain is impossible (see related question) Logging into the domain takes ages Authentication usually fails Question: How to debug this and pinpoint the exact problem? I have no enough knowledge on either WiFi networks or on Active Directory to know which connections are made at which stages nor how to check what's happening at the wireless level to compare what should happen to what is happening. I'm looking for resources to learn what should be happening and tools to detect what is actually happening (I expect a sniffer should be enough, but if there are better, more specialized tools, that'd be great).

  Read the article

• Two routers in a LAN

  - by taxi

  router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

  Read the article

• How to select a user and remove all groups they are a member of using Powershell (with Quest)?

  - by Don

  I've read quite a bit online about this and thought I had found a solution, but it doesn't seem to be working like I would expect. I am wanting to get a user based on the username I input, then remove all groups that it is a member of. Basically the same thing as going into ADUC, selecting the user, selecting the Member Of tab, highlighting everything (except domain users of course) and selecting remove. Here's the command I'm trying to use: Get-QADUser -Name $username | Remove-QADMemberOf -RemoveAll Others have said online that it works for them, but so far it hasn't for me. It doesn't give an error, it accepts the command just fine, but when I look in ADUC, the groups are still there for the user. Any suggestions as to what I may be doing wrong? Executing from Windows 7 with domain admin rights, Exchange cmdlets and Quest snapin loaded. Thanks!

  Read the article

• DNSCache excesive memory usage Windows Server 2008 R2

  - by MikeT

  We are having an issue with the dnscache service where its memory usage is becoming excessive (~6GB) after a week or two. Restarting the service frees this memory but performing ipconfig /flushdns does not, an ipconfig /displaydns shows aprox 15-20 entries in the cache. We have checked and there appears to be aprox 150 DNS queries per second taking place but I would not expect this to have the effect of causing this memory issue. I have tried to search MSDN for hotfixes or bug reports but I could only find a reference to a memory leak in windows 2003. can anyone suggest how to proceed.

  Read the article

• win7-64sp1: Rename folder (including zip file) error popup

  - by P a u l

  With the install of win7-64sp1 I get a windows explorer popup on any folder rename including .zip files. "Could not find this item" They are referring to the old name. What a bug. If I click "Try Again' the popup goes away, folder is renamed. Lots of posts on the net about this but no fixes. I tried a registry patch (that I shouldn't have) and it did nothing to fix. My experience with Microsoft is that they will never fix this, and want me to buy windows 8. This started happening after the install of sp1. I posted in one of the zillions of ridiculously byzantine and almost useless Microsoft forums but expect no answer there. They'll probably tell me to reinstall windows.

  Read the article

• Hyper-V share a folder between host and instance

  - by Fly_Trap

  I have a hyper-v server and several VM's (Virtual Machines). All the VM's are connected to an external network. I have tried to share a folder on the host and connect via the VM, I can do this but I'm prompted for a user name and password (as you would expect). I do not want to enable the "Everyone" group permissions as the physical host server is on a network of other servers. I have created a new virtual internal network in Hyper-V and given it's adapter a static ip of 33.0.0.100. I have added the virtual adapter to one of the VM's and set to IP to 33.0.0.2 (as advised here). Again this seems to work but I'm still prompted for a user name and password. Am I on the right lines here? I just want to share a directory from the host to the vm's without exposing the share to other servers on the network.

  Read the article

• RAID striping on a desktop machine

  - by Blazemore

  I currently have a 120Gib SSD which is pretty fast for things like game loading times and video editing. However, I was wondering about getting another identical drive and hooking it up with a striping RAID array in hardware (I boot multiple operating systems). This would have the dual benefits of providing a larger logical drive, while also providing greater performance. However, I have a few questions: What kind of performance increase can I expect to see with a pair of good quality SSDs? How expensive is a quality desktop RAID controller? Will the controller present the OS with a single logical drive? Does this mean I can still partition it and multi-boot? Basically, can I treat the RAID controller as "a hard drive" at the OS level?

  Read the article

• Is it normal that Software installs in Admin user folder?

  - by RoToRa

  I've got a new computer with Windows 7, which I'm using for the first time. For security I decided to create a standard user for everyday work instead of using an admin account. However when I install programs logged in as the standard user (such as Aptana right now) they always try to install in the admin's user folder (C:\Users\Admin\AppData...). I'd expect the programs to install to the standard user's folder or Progran Files as in XP. This also leads to that I need to grant admin rights whenever I start such a program. Of course I could just change the installation path every time, but I find this behavior strange. Ist it normal, or did I somehow mess up the Windows 7 installation?

  Read the article

• What function should I use in Excel for searching a (multiple) text string?

  - by Alenanno

  The title is a bit unclear, but I'll be explaining it now for better clarity. I have this: When I type in the Input field, I'd like Excel to show me the result in the Output field. For example, if I write Four, I'd like it to output 20, or if I write one of the other three words, then 12. The problem is that... I can't make it to work. The formula I tried is "=CERCA(C2;G:G;H:H)" (cerca means search), so I'm saying "Take what I write in the cell C2, search through the column G and give me what you find from the column H", but the result is always N.D. (Not available). I've tried other combinations and: Text strings, does not work; Single numbers, works (if I search 1, it says 2, which is what I expect); multiple numbers, does not work (if I search 4, nothing happens). What function should I use?

  Read the article

• Is iTunes touching my library files automatically and/or in the background?

  - by Rich

  I am currently using a service called Cubby (it is like Dropbox) to sync my iTunes library between several computers. I would expect then that syncing only occurs when I add to or delete from the library. But I notice that often the Cubby app will be actively syncing when I haven't made any changes, and it will give notifications that (for example) a song changed which I definitely did not recently add/remove. Likewise I have lately been seeing weird changes in filename and track number tags. I wonder if this is iTunes trying to organize something automatically and failing? So does anyone know if iTunes will routinely modify your library files and how/why? What is it doing?

  Read the article

• Ubuntu upstart hangs on interactive start & stop

  - by danorton

  How do I get Ubuntu upstart to not hang on interactive start & stop? I have created many upstart scripts that work fine during init, but often hang when I enter them at the console. If I CTRL+C out, all that happens is that the job changes state. The script is never run. I’m running Ubuntu Lucid on a Xen virtual server with a Linux 2.6.39 kernel. Below is merely a representative example of many scripts that behave this way: description "apache2" start on local-filesystems \ and (net-device-up IFACE=lo) \ and (runlevel [2345]) stop on runlevel [016] respawn respawn limit 10 5 expect daemon script . /etc/apache2/envvars /usr/sbin/apache2ctl start end script

  Read the article

• Performance impact of running Linux in a virtual machine in Windows?

  - by vovick

  Hello, I'd like to know what performance impact I could expect running Linux in a virtual machine in Windows. The job I need Linux for is heavy and almost non-stop code compilation with GCC. Dual-boot doesn't look like a very attractive solution, so I'm counting on low VM overhead right now (10-20% would be fine for me, but 50% or more will be unacceptable). Did anyone try to measure the performance difference, are there any comparison tables? What virtual machine with the lowest overhead possible will you suggest? My host OS is Win7 and I've got a modern Core i7 with VT-x present. Thanks!

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >