Search Results

Search found 2538 results on 102 pages for 'mr room'.

Page 63/102 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Dual Touchscreens in Different Rooms

  - by Ash

  I'm planning on having one dual-core system running two touchscreens, each in its own room in the house. I'd like to be able to use the internet on one, while someone else uses the other to record music - each of us interacting with the screen as we would separate computers. I was also thinking that running each screen, or certain programs, on its own core might make this work more smoothly. Will this setup work in Windows 7 Home on a mini-tower or do I need to invest in a server to get this sort of workstation/terminal setup to work?

  Read the article

• What service can hold CPU at lowest frequency possible when on battery load under Ubuntu?

  - by vava

  When I'm running on battery even with "performance" frequency scaling governor, something regularly lowers CPU speed to it's lowest value. I don't really want that, my AC strip usually in another room so I don't really need to save power. How can I find what service doing that? laptop_mode is disabled so that's not it. Update: Looks like CPU being scaled down only if it is under load. If it is more or less idle, it could stay on any frequency pretty much forever, but once it gets loaded, it quickly jumps to it's lowest frequency. Another update: Something sets maximum frequency CPU can have. Ubuntu launchpad bug 242006

  Read the article

• Router used as ethernet bridge wont show up

  - by user1255271

  I have a Netgear router in my living room that has the wireless signal. It is connected to a Powerline plug that goes up to my bedroom. That is plugged into another router that is used as an ethernet hub. It's cables go into my PS3 and my server. The second router shows up as a hidden network on my laptop, and I can connect to it. But it is not listed as an attached device on my main router, and my laptop says that it connects straight to the main router, not the second one. How can I connect to this router? Aside from swapping the two? Thanks in advance.

  Read the article

• How do I set the TEMP environment variable for the "Network Service" user?

  - by Chris Phillips

  We have a system that uses Path.GetTempFile and Path.GetTempPath calls to work with temporary files fairly frequently. This system also runs as the "Network Service" user. We're finding that we're running out of room on the C drive (for other issues, our temp files are cleaned up correctly) and would like to be able to move the temp directory to a different drive. The easiest solution to this seems to be to change the TMP or TEMP environment variables for the Network Service user, but I only seem to be able to set my own user or the "system" variables that are overwritten by the Network Service user profile. How do I set these variables for the Network Service user?

  Read the article

• Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

  - by Synetech

  I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

  Read the article

• Cross-platform automatic adhoc wifi?

  - by marienbad

  I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

  Read the article

• solving network connection problem on xp

  - by doug

  Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

  Read the article

• 'DNS service isn't responding' in windows 7

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• What's a good web-based application for storing your book collection?

  - by JJarava

  Hi all! I'm looking for a (better if web-based; i.e., something I can install in my home server on my LAN) software to keep track of my books/DVDs/etc. I already know of Readerware offerings, which I find quite interesting, but I'd like something that is Web-based, so I can run it on my MacMini on the living room, and access it from any of the comuputers in the house. I've been googling around, and I've been quite surprised to NOT find any clear option. Alternatively, good "native" software for Windows/MacOSX will be more than welcome. Thanks a lot PS: Given the # of interesting suggestions for Web 2.0, ASP-Hosted type sites, I've clarified the question a bit: I'd prefer some software that I can install and use in my systems, not something "in the cloud" (although I'll check the suggestions out!)

  Read the article

• Access console of QNX server

  - by dhergert

  I am new to QNX (although I am familiar with Unix/Linux). This company I am working with has an old QNX (4.25) server in a server room that they remotely access via Windows terminals (Kermit via Telnet) which presents them with a text-based program. I need to get into/onto the actual box to be able to view directories, files, etc... and wondering if I can do that "remotely", along the lines of how I would SSH into a Unix box. Is there something like that in QNX? Do I need to actually hook up a keyboard/monitor to this server to be presented with a console? Would I even get a console?

  Read the article

• SSH without portforward

  - by maigel

  I have a raspberry pi lying around in my dorm room. It's connected to campus internet which has all ports closed and I obviously don't have any access or permission to port forwarding. Now I want to ssh to the raspberry pi but this isn't possible since I can't port forward. I do however have a cheap vps doing nothing. Is there a way to make the pi connect to the vps and then use the vps as some sort of tunnel to ssh to the raspberry pi without having any port forwarding done?

  Read the article

• Are there any 17-20 inch monitors that support displayport?

  - by WildJoe

  I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

  Read the article

• connecting internet TV modem to repeater router, will it work?

  - by Sandro Dzneladze

  I've internet TV at home, it works via special modem which connects to router via Lan interface. I'd like to move Tv to a room which has no router. so i'd like to use wifi for internet TV. My plan is this, buy another wifi router, set it to repeat sygnal of primary router and attach this TV modem to repeater router via Lan interface. Will this work? I have limited understanding of how internet TV works, so I'm not sure if my strategy will work... does router have to have some special feature to allow this service? will my strategy work?

  Read the article

• Windows 2008 Server on VMWare (hardware)

  - by Bill

  I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

  Read the article

• Block complete network access for one local user

  - by tumchaaditya

  Well, this is quite trivial question but I could not find a satisfactory answer even after trying many search queries both here and on Google. I want to share my PC with my room-mate. And I don't want him to access ANY network(LAN included). So, I can create an account for him and block network access for the same. I would prefer avoiding any third-party tools as far as possible. It's a simple home PC hooked up to a router for internet. No domain and other stuff. (Technically, guest account can achieve this. But somehow, the guest account on my PC has network access!)

  Read the article

• Resize windows command line prompt?

  - by Yuval

  Hi, I'm working on a Windows xp machine. I wrote a program in assembly that outputs some text, and am trying to create a screenshot of the command line output (start-run-"cmd"). The problem is that the text initially printed by the program gets pushed up by later text and I cannot scroll to it. I tried playing around with the width and height under properties = layout but it seems to resize the window itself (the borders) without resizing the textarea inside the window (text does not have more "room", but the window is bigger). Does anybody know a workaround/solution for this? Thank you!

  Read the article

• Dust prevention for home servers [closed]

  - by Payson Welch

  I found some posts on here about dealing with dust relating to servers but nothing that specifically addressed my question. I have several servers at home for research and as you can probably guess they are not cheap. It is impossible for me to remove 100% of the dust from my home as much as I may try. Does anyone know of any practical solutions to filtering the air that will go into the servers? For instance maybe place some sort of material over the bezel to catch dust particles before they enter? I realize the ideal home solution would be to have a small room with environmental controls but I'm not there yet. Thanks!

  Read the article

• Can the JVM(Oracle) run into an OutOfMemory error if the heap size is below the max?

  - by user439407

  I am running a Tomcat site(with an NGinx front end) that seems to be randomly running out of memory even though the max heap size is pretty large. My question is is it possible for the JVM to get an OutOfMemory error even if the heap size is significantly less than -Xmx? For instance, here is a snapshot I took just 15 seconds before an OutOfMemory error: Tue Dec 18 23:13:28 JST 2012 Free memory: 162.31 MB Total memory: 727.75 MB Max memory: 3808.00 MB I guess theoretically it's possible that my code generated 3 gigs worth of objects in 15 seconds, but I highly doubt it. It seems like the JVM was unable to grow the heap even though it theoretically had room....Is it possible that other processes started using memory to the point that the JVM could not grow? I am running 64-bit Oracle Hotspot on a 64 bit vm running CentOS 5 with 6 gigs of ram.

  Read the article

• Linux cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Linux as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Linux installers by boot from CD they see the entire hard drive as unallocated space. I have tried Ubuntu 10.10, Kbuntu 10.10 and Fedora 14 and they all have the same problem. I have also tried the Ubuntu "install in Windows" option and could not get it to work. EDIT: Booting Gparted 0.8.0 from a usb drive did not work. It reported the entire drive as unpartitioned.

  Read the article

• House Wiring for Ethernet/Coax/Power

  - by Adam Kragt

  Hoping this is the right place to post, the rest didn't seem to fit. If not, I apologize. Remodeling my house and want to wire up each room with Ethernet/coax wall ports. Both Ethernet, coax and power will be running through the sub-floor. I've read that there needs to be 2 ft between power cables and Ethernet to limit/prevent interference. Is this true? If not, does anyone know what the distance is? Thanks!

  Read the article

• ESXI with non standard hardware HDD issues

  - by Hurricanepkt

  I have 3 very underutilized servers that I am condensing to one of those shuttle PC's with VMWare ESXi The HDD seems to be the bottle neck right now (the light is almost always pure solid) right now I have a single 1TB Seagate 7200.11 connected by SATA. VMWare ESXi cannot detect it when running in AHCI mode, but does when running in IDE mode. I have read that IDE mode can give a 5% performance hit which might give me enough breathing room. However, I am open to setting up an external eSATA or some sort of raid to give me more than just the 5%. I am just weary of sinking some money into a bit of hardware without knowledge of whether it will work. Does anyone know of resources or procedures of how to get this working.

  Read the article

• Create a dependent drop down list in a single cell in Excel

  - by Larry Anderson

  I am trying to create a dependent drop down list for a High School. The User will select cell A1, Click on Hallway 3(for example), then the user will click on cell A1 again and then select the Room #, 325 (for example). The final result should be that cell A1 shows 325. I can create the first drop down list, but the second part is where I am having great trouble. I am using Excel 2010. Any help would be appreciated. Thanks

  Read the article

• Looking for an open source real-time network analysis program

  - by JrSysAdmin

  Can somebody recommend an open source real-time network analysis program? What I'm looking for the program to do is display a graph of bandwidth usage by IP within our internal network that can quickly be viewed any time we need to (typically when we want to quickly find out who is utilizing high amounts of bandwidth and slowing down the network). We ideally simply want to hook up a monitor on the wall of our server room to a system whose NIC will be in permissive mode to log all network activity in a visual manner which can easily be seen and running 24/7. Prefer open source as I do not have a budget for this project and prefer open source projects in general. I'd also prefer for this to be available for CentOS but any linux distro or Windows OS would be acceptable. Thanks!

  Read the article

• Print Managment

  - by nardone25

  Hello everyone, I am having a ID10T error LOL,. First I am using window server 2003 r2 edition. I installed on a domian controller print managment. So this is where all 48 printers I have are installed. I just got a new printer. I gave it an IP for the machine and when I head into the server room i tried to add it to the server. I can print a test page, when I am logged on to the print server, but on my client computer when he goes to add a printer in window xp pro the printer isn't listed in add print for network. What did I do wrong?

  Read the article

• Best way to "stream" music / video to my HDTV from my pc?

  - by loj

  My requirement is simple: I have a laptop and a desktop at home that I often use for various media (music, videos etc.) and I want to know what the best (quickest, most seamless, best quality etc) solution for sending this media to my HDTV (and connected sound system). An example would be I'm listening to some music from youtube on my laptop in my living room and want to quickly send it to my tv (which has a sound system) so that I don't have to listen to it through my laptop. I mainly use linux (but a windows dependent solution would be ok too if its the best option). I would greatly appreciate any suggestions. Oh and a wireless solution would be best.

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >