Search Results

Search found 4860 results on 195 pages for 'sudo petruza'.

Page 63/195 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• How to install aircrack on Ubuntu 12.04

  - by user287903

  I have downloaded the tar.gz package from the site and then I have extracted using tar -zxvf command as mentioned over there. After that I used sudo apt-get install build-essential then I further installed libssl-dev. Then I changed directory to the aircrack folder. But when I type either sudo make or just make I am getting this same error. I don't know what to do. I have installed the file what they have asked in the error as well. Still the same error is shown. Okay I am not permitted to upload images. The error is : common.mak:85: *** Cannot find development files for any supported version of libnl. install either libnl1 or libnl3.. Stop.

  Read the article

• Ubuntu 12.10 doesn't work after update

  - by ACRTH

  12.10 doesn't work after a partial distribution update. I had some trouble before I began the update, and the Partial Update thingy appeared. It took about 6 hours to update/upgrade, don't know why. After the update, I restarted the laptop and nautilus doesn't appear nor does Unity. I can't switch to Gnome or anything else to try and fix it. The resolution is weird (doesn't fill out the right side of the screen). I'm almost sure it's Compiz who's the sinner (or me.) but I need help to get everything working again. Internet connections is fine. I have tried sudo apt-get install -f and sudo apt-get upgrade and so on.

  Read the article

• I need to get past my permissions to recover data

  - by adsmz

  Due to some mishaps, I am unable to boot into Kubuntu at all. However, my data is still on the hard drive. I managed to get one of the other two computers to which I have access to read the disk by booting into a liveCD session of kubuntu. The only storage medium to which I have access is a 30 GB data stick. Here's where the trouble starts: In music alone, I have to back up about 60 GB. Obviously this is going to have to be split into chunks and moved over to the second spare PC until I can reinstall Kubuntu on my laptop. All of the data that needs backed up is behind a permissions wall, so while I can view it, I can't interact with it directly. I know copying and moving through the terminal can get around this with sudo cp or sudo mv, but is there a way to first compress multiple folders in a single archive, then move it? (While we're on the subject, what compression method would be best for large volumes of music in MP3, WAV, and OGG format?)

  Read the article

• Strange permission errors in new PostgreSQL installation

  - by Bart van Heukelom

  A freshly installed PostgreSQL (with configuration overwritten) won't start: $ sudo service postgresql start * Starting PostgreSQL 9.1 database server * Error: could not read /etc/postgresql/9.1/main/postgresql.conf: Permission denied Looks like it should be able to read it though: $ ls -l postgresql.conf -rw------- 1 postgres postgres 19450 2012-06-14 10:07 postgresql.conf But fine, I'll add chmod +r it to test if that works. $ sudo chmod +r postgresql.conf $ sudo service postgresql start * Starting PostgreSQL 9.1 database server * The PostgreSQL server failed to start. Please check the log output: Error: Could not open log file /var/log/postgresql/postgresql-9.1-main.log Huh? $ ls -l /var/log/postgresql/ total 4 -rw-r----- 1 postgres adm 827 2012-06-14 10:07 postgresql-9.1-main.log I don't get it. What can be wrong here? This used to work before. Can I maybe monitor what process attempts to open the file? It's Ubuntu 11.10 on EC2, using Chef. For completeness, here's the recipe: # Install PostgreSQL package "postgresql-9.1" # Stop server service "postgresql" do action :stop end # Overwrite configuration (setting data dir) template "/etc/postgresql/9.1/main/postgresql.conf" do source "postgresql-conf.erb" owner "postgres" group "postgres" end # Start server service "postgresql" do action :start end

  Read the article

• Bind9 configured to start at boot, has to be started manually

  - by antik

  I've configured bind9 on my system and it works great when it runs. It's currently configured to be run at runlevel 2 by setting: $ sudo update-rc.d bind9 enable 2 This appears to have done its work: $ tree -f /etc/rc?.d | grep -e ".*bind9$" |-- /etc/rc0.d/K85bind9 -> ../init.d/bind9 |-- /etc/rc2.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc3.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc4.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc5.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc6.d/K85bind9 -> ../init.d/bind9 Booting the system, I believe I am at runlevel 2: $ runlevel N 2 Given the above configuration, when the system is rebooted, bind does not come up. Only on occasion, for some reason, can I resolve hostnames immediately after startup. Far more often than not however, I cannot. I can interrogate the service's status: $ sudo /etc/init.d/bind9 status * could not access PID file for bind9 When the service doesn't start, I can start it successfully via a terminal by issuing $ sudo /etc/init.d/bind9 start And it works great from then on. Loopback configuration: $ ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1872 errors:0 dropped:0 overruns:0 frame:0 TX packets:1872 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:220205 (220.2 KB) TX bytes:220205 (220.2 KB) Do I have my startup misconfigured? (I'm used to Gentoo so Ubuntu's model is still a little new to me) I'm not seeing any log indication of a failed attempt to start at boot in syslog. Is there someplace else I should be looking? What else should I look into to get bind working at startup?

  Read the article

• Cannot install jdk 1.5 on Ubuntu 12.04

  - by u123

  I have installed Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-23-generic x86_64). Some info about the machine: $ grep --color "model name" /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz model name : Intel(R) Xeon(R) CPU E5430 @ 2.66GHz I need to install jdk5 to support an old application. I have tried: ~$ sudo apt-get install openjdk-5-jdk Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package openjdk-5-jdk I have also tried: ~$ sudo apt-get install sun-java5-jdk Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package sun-java5-jdk So its not available in the repos. I have tried to follow this guide (adding the jaunty repos): http://leonardo-pinho.blogspot.dk/2010/11/java-15-no-ubuntu-1010.html but same result. Then I have tried to download jdk-1_5_0_22-linux-i586.bin from here: http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javase5-419410.html#jdk-1.5.0_22-oth-JPR and do: ~$ chmod a+x jdk-1_5_0_22-linux-i586.bin ~$ sudo ./jdk-1_5_0_22-linux-i586.bin Sun Microsystems, Inc. Binary Code License Agreement yes Unpacking... Checksumming... 0 0 Extracting... ./jdk-1_5_0_22-linux-i586.bin: 424: ./jdk-1_5_0_22-linux-i586.bin: ./install.sfx.19556: not found ./jdk-1_5_0_22-linux-i586.bin: 1: cd: can't cd to jdk1.5.0_22 Any suggestions?

  Read the article

• Why does my dd backup of MacBook OS X fail to boot upon restore?

  - by James

  I created a backup of a MacBook hard drive (WD2500BEVS-88US) by hooking it up as a secondary drive on my linux system (Ubuntu 10.10). I used the following command: sudo dd if=/dev/sdc of=/home/backup.img bs=2M This appears to have completed with no errors. I noticed that the file is only 68 GB in size even though the drive is 250 GB in capacity. I restored the image to a spare drive (WD2500BEVS) with the following command: sudo dd if=/home/backup.img of=/dev/sdb bs=2M When I boot the spare drive in the Mac, it appears to start up for a few seconds and then shuts down. (It does not appear to load into the OS at all). When I open up the drive that won't boot in GParted, it looks like this: When looking at the information for the middle partition with the little red exclamation mark, it shows this: The original hard drive that boots ok shows up like this: Further info on both drives: sudo fdisk -l Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 30402 244198580 ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 30402 244198580 ee GPT So why is my backup or restore failing? Why is dd not creating a byte for byte duplicate?

  Read the article

• mysqld_safe Can't log to error log and syslog at the same time. Remove all --log-error configuration options for --syslog to take effect

  - by photon

  When I'm trying to install MySQL 5.5 community edition on my Ubuntu 10.04 by compiling the source code, I met the following problem: $ fg % 1 sudo ../bin/mysqld_safe --basedir=/usr/local/mysql_community_5.5/data --user=mysql --defaults-file=/etc/my.cnf [sudo] password for linnan: Sorry, try again. [sudo] password for linnan: 121023 09:26:21 mysqld_safe Can't log to error log and syslog at the same time. Remove all --log-error configuration options for --syslog to take effect. Internal program error (non-fatal): unknown logging method '/usr/local/mysql_community_5.5/log/mysql.log' 121023 09:26:21 mysqld_safe Logging to '/var/log/mysql/error.log'. Internal program error (non-fatal): unknown logging method '/usr/local/mysql_community_5.5/log/mysql.log' 121023 09:26:22 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121023 09:26:23 mysqld_safe mysqld from pid file /var/lib/mysql/ubuntu.pid ended It seems that the problem is related to log configuration. I've noticed a bugfix related to this problem: http://bugs.mysql.com/bug.php?id=50083 But I still have no idea how to solve it. The relative content in /etc/my.cnf: [mysqld] port = 3306 socket = /tmp/mysql.sock skip-external-locking key_buffer_size = 384M max_allowed_packet = 1M table_open_cache = 512 sort_buffer_size = 2M read_buffer_size = 2M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 8 query_cache_size = 32M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 8 character-set-server=utf8 [mysqld-safe] basedir=/usr/local/mysql_community_5.5 datadir=/usr/local/mysql_community_5.5/data mysqld_safe_syslog.cnf: /etc/mysql/conf.d/mysqld_safe_syslog.cnf: [mysqld_safe] syslog

  Read the article

• Can't start Bind9 on Ubuntu 10.04 + Plesk 10.1 - "named: no process found"

  - by bradley.ayers

  I've installed a fresh version of Ubuntu 10.04 64bit, I didn't install bind when choosing what packages should be installed in the Ubuntu installer. I downloaded the auto installer for Plesk 10.1 and installed it successfully. When I logged into the Plesk control panel and tried to change the password, it failed because it couldn't restart bind. I SSH'd into the box and tried a sudo /etc/init.d/bind9 restart and get the following: brad@ws01:/root# sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) rndc: connect failed: 127.0.0.1#953: connection refused named: no process found [ OK ] * Starting domain name service... bind9 [fail] Looking at tail /var/log/messages reveals a whole bunch of: Feb 23 16:08:21 ws01 kernel: [ 3840.065851] type=1503 audit(1298441301.831:31): operation="open" pid=5565 parent=5563 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=108 ouid=0 name="/var/named/run-root/etc/named.conf" Edit: After following ooshro's advice, bind runs, however I still get the named: no process found error: brad@ws01:/etc/apparmor.d$ sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) named: no process found [ OK ] * Starting domain name service... bind9 [ OK ]

  Read the article

• Resizing a LUKS encrypted volume

  - by mgorven

  I have a 500GiB ext4 filesystem on top of LUKS on top of an LVM LV. I want to resize the LV to 100GiB. I know how to resize ext4 on top of an LVM LV, but how do I deal with the LUKS volume? mgorven@moab:~% sudo lvdisplay /dev/moab/backup --- Logical volume --- LV Name /dev/moab/backup VG Name moab LV UUID nQ3z1J-Pemd-uTEB-fazN-yEux-nOxP-QQair5 LV Write Access read/write LV Status available # open 1 LV Size 500.00 GiB Current LE 128000 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 2048 Block device 252:3 mgorven@moab:~% sudo cryptsetup status backup /dev/mapper/backup is active and is in use. type: LUKS1 cipher: aes-cbc-essiv:sha256 keysize: 256 bits device: /dev/mapper/moab-backup offset: 3072 sectors size: 1048572928 sectors mode: read/write mgorven@moab:~% sudo tune2fs -l /dev/mapper/backup tune2fs 1.42 (29-Nov-2011) Filesystem volume name: backup Last mounted on: /srv/backup Filesystem UUID: 63877e0e-0549-4c73-8535-b7a81eb363ed Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131071616 Reserved block count: 0 Free blocks: 112894078 Free inodes: 32044830 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stride: 128 RAID stripe width: 128 Flex block group size: 16 Filesystem created: Sun Mar 11 19:24:53 2012 Last mount time: Sat May 19 13:29:27 2012 Last write time: Fri Jun 1 11:07:22 2012 Mount count: 0 Maximum mount count: 100 Last checked: Fri Jun 1 11:03:50 2012 Check interval: 31104000 (12 months) Next check after: Mon May 27 11:03:50 2013 Lifetime writes: 118 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: 383bcbc5-fde9-4720-b98e-2d6224713ecf Journal backup: inode blocks

  Read the article

• Fix stubborn 'Setting locale failed.'

  - by plua

  I have a very stubborn, well-known locale error on Ubuntu 9.10: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "custom.UTF-8", LANG = "en_US.UTF-8" Tried the following: Added LANG=en_US.UTF-8 and LC_ALL=en_US.UTF-8 to /etc/environment Run apt-get install --reinstall locales (error: perl: warning: Falling back to the standard locale ("C"). /usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct) Run sudo dpkg-reconfigure locales. Result: Cannot set LC_ALL to default locale: No such file or directory, and then updates locales all locales including en_US.UTF-8 sudo locale-gen updates all locales successfully, including en_US.UTF-8 sudo locale-gen un_US en_US.UTF-8 gives no error nor other output In /etc/default/locale it says LANG="en_US.UTF-8" echo $LANG gives en_US.UTF-8 /var/lib/locales/supported.d/local says en_US.UTF-8 UTF-8 locale -a gives me: C en_AG en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_NG en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZW.utf8 POSIX So well... I am pretty much out of options I can think of. Anybody any idea?? Thanks!

  Read the article

• Resize Debian in VirtualBox

  - by Poni

  I have a VM with one HD of size 3GB and I'd like to enlarge its HD to 7GB. So I execute this command on the host (while guest is shutdown): VBoxManage modifyhd debian.vdi --resize 7168 Then I run the guest, Debian 6, and then: smith@debian6:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 2.8G 2.6G 60M 98% / tmpfs 61M 0 61M 0% /lib/init/rw udev 57M 160K 57M 1% /dev tmpfs 61M 0 61M 0% /dev/shm smith@debian6:~$ sudo parted /dev/sda print Model: ATA VBOX HARDDISK (scsi) Disk /dev/sda: 3221MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 3035MB 3034MB primary ext3 boot 2 3036MB 3220MB 185MB extended 5 3036MB 3220MB 185MB logical linux-swap(v1) smith@debian6:~$ cat /proc/partitions major minor #blocks name 8 0 3145728 sda 8 1 2962432 sda1 8 2 1 sda2 8 5 180224 sda5 So, no automatic resizing (detection) of the HD/partition (while VirtualBox, in the host, shows it's 7GB now). Ok... Then I do: smith@debian6:~$ sudo resize2fs /dev/sda1 resize2fs 1.41.12 (17-May-2010) The filesystem is already 740608 blocks long. Nothing to do! smith@debian6:~$ sudo parted GNU Parted 2.3 Using /dev/sda Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) select /dev/sda1 Using /dev/sda1 (parted) resize WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Partition number? 1 Start? 0 End? [3034MB]? Here I'm stuck. At the above parted it asks me to resize to 3GB. No point in that, right.. What should I do in order to enlarge this partition?

  Read the article

• How to open python scripts directly by typing in their name in terminal (Mac OS X)

  - by Haffi112

  I'm working on installing django and running it on my system. I have a problem though, in this tutorial creating a project is explained by running the command django-admin.py startproject mysite My issue is that this doesn't work. I changed to the directory where django-admin.py is located and ran the command chmod +x django-admin.py with no results. I tried adding the directory with the file to my path without results. I ended up fixing my problem with this command python /location/of/django-admin.py startproject mysite which yielded the outcome I expected. My problem is: What do I need to change/configure such that command django-admin.py startproject mysite would be sufficient? Here are some experiments: 21:09~/Desktop/HI/NSN/Polls > django-admin.py startproject mysite -bash: django-admin.py: command not found 21:09~/Desktop/HI/NSN/Polls > ./django-admin.py startproject mysite -bash: ./django-admin.py: No such file or directory 21:09~/Desktop/HI/NSN/Polls > python django-admin.py startproject mysite python: can't open file 'django-admin.py': [Errno 2] No such file or directory 21:09~/Desktop/HI/NSN/Polls > /opt/local/lib/python2.4/site-packages/django/bin/django-admin.py startproject prufa1 -bash: /opt/local/lib/python2.4/site-packages/django/bin/django-admin.py: /opt/local/bin: bad interpreter: Permission denied 21:09~/Desktop/HI/NSN/Polls > sudo /opt/local/lib/python2.4/site-packages/django/bin/django-admin.py startproject prufa1Password: sudo: unable to execute /opt/local/lib/python2.4/site-packages/django/bin/django-admin.py: Permission denied 21:09~/Desktop/HI/NSN/Polls > sudo /opt/local/lib/python2.4/site-packages/django/bin/django-admin.py startproject prufa1sudo: unable to execute /opt/local/lib/python2.4/site-packages/django/bin/django-admin.py: Permission denied 21:09~/Desktop/HI/NSN/Polls > python /opt/local/lib/python2.4/site-packages/django/bin/django-admin.py startproject prufa1 21:09~/Desktop/HI/NSN/Polls > ls mysite prufa1 Final edit: The problem is solved, see Ian C's answer for the right solution. Thank you everyone for helping my out, this was very fast!

  Read the article

• Configuring vsftpd with nginx on Ubuntu 12.04 LTS

  - by arby

  I've attempted to configure a nginx / vsftpd server on Ubuntu 12.04 LTS (via amazon ec2) a couple times now, but I seem to keep making a mistake along the way. Currently, when I try to connect to my ftp server it takes a minute or so before it connects. Then when I issue a command, they all timeout with an operation failed error. Aside from these issues, I'm not completely confident with the file ownership & permissions or the configuration / settings. So, I think it's best if I just re-install and re-configure correctly. I believe the nginx installation comes with a default user of www-data:www-data and web root directory ownership by root:root. Vsftpd, however, needs to have a user created with the same group as the nginx user (www-data), and the same home directory as the nginx server (/usr/share/nginx/www), with g+w chmod permissions granted on that directory. The vsftpd.conf file should disable anonymous logins and enable local logins, file writing, and chroot local users. In my previous config, I had /bin/false set for the ftp user's shell and pam_shells.so disabled. I also had local_umask set to 0027. So, starting with a fresh ec2 instance, I've got: sudo apt-get install vsftpd sudo apt-get install nginx For the firewall I issued the command (not sure if necessary): sudo ufw allow ftp Which commands / config is recommended from here? I only need 1 ftp user that I can use to login with my ftp client to modify the single nginx web domain, which will need php & sql for WordPress.

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing. EDIT: If I currently have been trying: sudo route flush sudo route add default 192.168.19.1 This gets everything to work for about a minute. But after such minute it "forgets" the routing to WiFi while retaining LAN's (en0) routing. If I unplug and replug my LAN (en0) cable, the process works for another minute.

  Read the article

• Ubuntu : apt-get command error

  - by Wibowo Margito

  I work with Ubuntu 10.04 everyday. Several days ago, when I release command sudo apt-get install .... it run very good, no error. I also able to open websites with my browser with no proxy. But, today, I got error. Every time I release the command, the connection redirected to an IP in my local network. I can see it in the terminal window. Several days ago I tried to connect to the internet throught the IP, by SSH tunneling. But I forget what I have done and there is no way home. This is the output in terminal : deo@deo-laptop:~$ sudo apt-get update [sudo] password for deo: Err http://cx.archive.ubuntu.com lucid Release.gpg [ Could not connect to 10.7.7.15:3128 (10.7.7.15). - connect (110: Connection timed out) Err http://cx.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US Unable to connect to 10.7.7.15:3128: 10.7.7.15 is an adress in my local network. Somebody please help me :)

  Read the article

• Chmod 644 on /etc/ any way to fix?

  - by DazSlayer

  I tried to tab complete something and I guess it wasnt there. I know you are not supposed to set the permissions to /etc/ like that, but my permissions seem to be all messed up. whoami prints out cannot find name for user ID 1002 and I cannot cd into /etc/ anymore. passwd and shadow use 640 and 644 so I am not sure why this is a problem. Regardless, is there any way to fix this? The command run was sudo chmod 644 /etc/ I have no name!@vpn-server:/$ whoami whoami: cannot find name for user ID 1002 I have no name!@vpn-server:/$ cd etc bash: cd: etc: Permission denied I have no name!@vpn-server:/$ ls -al etc d????????? ? ? ? ? ? . d????????? ? ? ? ? ? .. d????????? ? ? ? ? ? acpi -????????? ? ? ? ? ? adduser.conf I have no name!@vpn-server:/$ sudo su sudo: can't open /etc/sudoers: Permission denied

  Read the article

• How to mount vfat drive on Linux with ownership other than root?

  - by Norman Ramsey

  I'm running into trouble mounting an iPod on a newly upgraded Debian Squeeze. I suspect either a protocol has changed or I've tickled a bug, which I don't know where to report. I'm trying to mount the iPod so that I have permission to read and write it. But my efforts come to nothing: $ sudo mount -v -t vfat -o uid=32074,gid=6202 /dev/sde2 /mnt /dev/sde2 on /mnt type vfat (rw,uid=32074,gid=6202) $ ls -l /mnt total 80 drwxr-xr-x 2 root root 16384 Jan 1 2000 Calendars drwxr-xr-x 2 root root 16384 Jan 1 2000 Contacts drwxr-xr-x 2 root root 16384 Jan 1 2000 Notes drwxr-xr-x 3 root root 16384 Jun 23 2007 Photos drwxr-xr-x 6 root root 16384 Jun 19 2007 iPod_Control $ sudo umount /mnt $ sudo mount -v -t vfat -o uid=nr,gid=nr /dev/sde2 /mnt /dev/sde2 on /mnt type vfat (rw,uid=32074,gid=6202) $ ls -l /mnt total 80 drwxr-xr-x 2 root root 16384 Jan 1 2000 Calendars drwxr-xr-x 2 root root 16384 Jan 1 2000 Contacts drwxr-xr-x 2 root root 16384 Jan 1 2000 Notes drwxr-xr-x 3 root root 16384 Jun 23 2007 Photos drwxr-xr-x 6 root root 16384 Jun 19 2007 iPod_Control As you see, I've tried both symbolic and numberic IDs, but the files persist in being owned by root (and only writable by root). The IDs are really mine; I've had the UID since 1993. $ id uid=32074(nr) gid=6202(nr) groups=6202(nr),0(root),2(bin),4(adm),... I've put an strace at http://pastebin.com/Xue2u9FZ, and the mount(2) call looks good: mount("/dev/sde2", "/mnt", "vfat", MS_MGC_VAL, "uid=32074,gid=6202") = 0 Finally, here's my kernel version from uname -a: Linux homedog 2.6.32-5-686 #1 SMP Mon Jun 13 04:13:06 UTC 2011 i686 GNU/Linux Does anyone know if I should be doing something different, or If there is a workaround, or If this is a bug, where it should be reported?

  Read the article

• Mysql Fail to start

  - by John Naegle

  I'm running a Ubuntu 12.04 LTS Virtual Machine. Last week, the VM stopped unexpectedly now mysql will not start on the VM. These two events may be related, they may not be. When I try to connect: $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Then: $ sudo service mysql start start: Job failed to start And $ dmesg [ 1838.218400] type=1400 audit(1374633238.253:50): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18473 comm="apparmor_parser" [ 1838.358656] init: mysql main process (18477) terminated with status 1 [ 1838.358695] init: mysql main process ended, respawning [ 1839.269303] init: mysql post-start process (18478) terminated with status 1 And $ service mysql status mysql stop/waiting I think this means mysql is crashing when it starts: $ sudo mysqld start 130723 21:51:24 InnoDB: Assertion failure in thread 3064211200 in file fut0lst.ic line 83 InnoDB: Failing assertion: addr.page == FIL_NULL || addr.boffset >= FIL_PAGE_DATA InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 02:51:24 UTC - mysqld got signal 6 ; Per the manual, I went to the data directory (/var/lib/mysql) and ran this: myisamchk --silent --force */*.MYI Then: $ sudo mysqld ... InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. ... Is my database corrupt? What can I do to recover? Re-install mysql? Something less drastic? I'm fine with losing the database, I just want a working system.

  Read the article

• I am trying to set up a ubuntu sever 12.04 on my machine [migrated]

  - by Jseb

  I am trying to set up a server on my home network which will eventually host rails. I am not great in linux server and i try to follow the prompt. I did succesfully get to a black screen which then prompts me to a username then password to then do anything ( assuming). However here what i try to do I kinda fellow his tutorial http://www.ubuntugeek.com/step-by-step-ubuntu-11-04-natty-lamp-server-setup.html but however the command where not 100% like him not in same order but same idea. Then i want to install ubuntu server with gui here the command i try with sudo apt-get upgrade sudo apt-get install ubuntu-desktop Which however give me the following error Err http... inRelease w Failed to fetch ht... So been ignored if i try the desktop one i get E: unable to locate package ubuntu E: unable to locate package desktop So i am assuming i am not connected to the internet, so i try the following command sudo vi /etc/network/interfaces here the output it gives me and i know my gateway on my laptop is 192.168.1.1 address: 192.168.1.148 netmask: 255.255.255.0 network: 192.168.1.0 broadcasts: 192.168.1.255 gateway: 192.168.1.1 Btw i do not know the command to get out of vi and saving it. Err http://us.archive.ubuntu.com precises InRelease Err http://us.archive.ubuntu.com precises-updates InRelease Err http://us.archive.ubuntu.com precises-backports InRelease Reading package lists... Done W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-updates/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backport/InRelease

  Read the article

• I had a power outage. Now MySQL's lock file won't go away. What do you suggest?

  - by jasonspiro

  I do freelance IT consulting for various clients, both in Toronto, Canada, and worldwide. A client recently experienced a power failure. Now they've been having various problems with a Slackware 12.0.0 machine which also acts as a DNS server. One problem is that they can't log into phpMyAdmin. I tried stopping and restarting MySQL. But even when MySQL is stopped, the lock file stays around. jasonspiro@cybertron:~$ sudo /etc/init.d/mysql stop Shutting down MySQL. SUCCESS! jasonspiro@cybertron:~$ sudo /etc/init.d/mysql stop ERROR! MySQL manager or server PID file could not be found! jasonspiro@cybertron:~$ sudo /etc/init.d/mysql status ERROR! MySQL is not running, but lock exists jasonspiro@cybertron:~$ ls -l /var/lock/subsys/mysql -rw-r--r-- 1 root root 0 2012-07-05 16:18 /var/lock/subsys/mysql Why is MySQL's lock file hanging around despite the fact that MySQL isn't running? Can I simply stop MySQL, delete the lock file, and start MySQL again? Are there any other steps that I should take next, or nothing?

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Phusion Passenger (Apache, Sinatra) suddenly not working for a single site on my server

  - by Kerrick

  I've had Phusion Passenger working for a few of my sites for months. Then, today, it stopped working for a single site. I hadn't changed anything (I hadn't even SSH'ed into the server for a week), and everything is set up the way it should for it to work. Plus, it's working fine for other sites! I'm about to pull my hair out trying to find out what's wrong, so I was hoping y'all could help. Passenger is not working on kerricklong.com -- I only get the "It works!" Apache default page. If I look at the headers, it's not even serving the X-Powered-By: Phusion Passenger (mod_rails/mod_rack) header that I get on my other (currently working) Passenger-powered sites on the same server running Ubuntu Server 10.04. The following is in my /etc/apache2/sites-available/kerricklong.com file, but it's identical (with names and paths changed) to the configuration file for the site that is working. <VirtualHost *:80> ServerAdmin [email protected] ServerName kerricklong.com ServerAlias *.kerricklong.com DocumentRoot /redacted/path/to/kerricklong.com/public ErrorLog /redacted/path/to/kerricklong.com/logs/error.log <Directory /redacted/path/to/kerricklong.com/public> Allow from all Options -MultiViews Include /etc/apache2/h5bp.conf </Directory> php_flag engine off </VirtualHost> I've got the necessary tmp/, logs/, and public/ directories, along with config.ru. I've also run sudo a2dissite then sudo a2ensite, sudo service apache2 restart, and reboot the server to try to fix it. What gives?

  Read the article

• MySQL Cluster ndb_mgmd error

  - by Patryk

  I set up MySQL Cluster on Ubuntu. My ndb_mgmd.cnf file looked: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.30 Now I want to edit this configuration, so I changed this file: [NDBD DEFAULT] NoOfReplicas=2 DataDir= /var/lib/mysql-cluster # Management Node [NDB_MGMD] NodeId=1 HostName=192.168.204.20 DataDir=/var/lib/mysql-cluster # Storage Nodes (one for each node) [NDBD] NodeId=2 HostName=192.168.204.25 DataDir=/var/lib/mysql-cluster [NDBD] NodeId=3 HostName=192.168.204.26 DataDir=/var/lib/mysql-cluster # SQL Nodes (one for each node) [MYSQLD] NodeId=4 HostName=192.168.204.25 [MYSQLD] NodeId=5 HostName=192.168.204.26 But ndb_mgm > show; still shows: Connected to Management Server at: localhost:1186 Cluster Configuration --------------------- [ndbd(NDB)] 2 node(s) id=2 (not connected, accepting connect from 192.168.204.25) id=3 (not connected, accepting connect from 192.168.204.26) [ndb_mgmd(MGM)] 1 node(s) id=1 @192.168.204.20 (mysql-5.1.51 ndb-7.1.9) [mysqld(API)] 1 node(s) id=4 (not connected, accepting connect from 192.168.204.30) I tried: sudo /etc/init.d/mysql-ndb-mgm restart sudo ndb_mgmd --initial sudo ndb_mgmd -f /etc/mysql/ndb_mgmd.cnf And nothing works. Any help?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >