Search Results

Search found 1724 results on 69 pages for 'symbol'.

Page 63/69 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• Creating an Objective-C++ Static Library in Xcode

  - by helixed

  So I've developed an engine for the iPhone with which I'd like to build a couple different games. Rather than copy and paste the files for the engine inside of each game's project directory, I'd a way to link to the engine from each game, so if I need to make a change to it I only have to do so once. After reeding around a little bit, it seems like static libraries are the best way to do this on the iPhone. I created a new project called Skeleton and copied all of my engine files over to it. I used this guide to create a static library, and I imported the library into a project called Chooser. However, when I tried to compile the project, Xcode started complaining about some C++ data structures I included in a file called ControlScene.mm. Here's my build errors: "operator delete(void*)", referenced from: -[ControlScene dealloc] in libSkeleton.a(ControlScene.o) -[ControlScene init] in libSkeleton.a(ControlScene.o) __gnu_cxx::new_allocator<operation_t>::deallocate(operation_t*, unsigned long)in libSkeleton.a(ControlScene.o) __gnu_cxx::new_allocator<operation_t*>::deallocate(operation_t**, unsigned long)in libSkeleton.a(ControlScene.o) "operator new(unsigned long)", referenced from: -[ControlScene init] in libSkeleton.a(ControlScene.o) __gnu_cxx::new_allocator<operation_t*>::allocate(unsigned long, void const*)in libSkeleton.a(ControlScene.o) __gnu_cxx::new_allocator<operation_t>::allocate(unsigned long, void const*)in libSkeleton.a(ControlScene.o) "std::__throw_bad_alloc()", referenced from: __gnu_cxx::new_allocator<operation_t*>::allocate(unsigned long, void const*)in libSkeleton.a(ControlScene.o) __gnu_cxx::new_allocator<operation_t>::allocate(unsigned long, void const*)in libSkeleton.a(ControlScene.o) "___cxa_rethrow", referenced from: std::_Deque_base<operation_t, std::allocator<operation_t> >::_M_create_nodes(operation_t**, operation_t**)in libSkeleton.a(ControlScene.o) std::_Deque_base<operation_t, std::allocator<operation_t> >::_M_initialize_map(unsigned long)in libSkeleton.a(ControlScene.o) "___cxa_end_catch", referenced from: std::_Deque_base<operation_t, std::allocator<operation_t> >::_M_create_nodes(operation_t**, operation_t**)in libSkeleton.a(ControlScene.o) std::_Deque_base<operation_t, std::allocator<operation_t> >::_M_initialize_map(unsigned long)in libSkeleton.a(ControlScene.o) "___gxx_personality_v0", referenced from: ___gxx_personality_v0$non_lazy_ptr in libSkeleton.a(ControlScene.o) ___gxx_personality_v0$non_lazy_ptr in libSkeleton.a(MenuLayer.o) "___cxa_begin_catch", referenced from: std::_Deque_base<operation_t, std::allocator<operation_t> >::_M_create_nodes(operation_t**, operation_t**)in libSkeleton.a(ControlScene.o) std::_Deque_base<operation_t, std::allocator<operation_t> >::_M_initialize_map(unsigned long)in libSkeleton.a(ControlScene.o) ld: symbol(s) not found collect2: ld returned 1 exit status If anybody could offer some insight as to why these problems are occuring, I'd appreciate it. Thanks, helixed

  Read the article

• WiX unresolved reference error

  - by David

  I'm using Wix version 3.0.5419.0. I have two .wxs files, one which is a fragment, and another which uses the fragment to create the .msi file. Here is the file which uses the fragment (DaisyFarmer.wxs): <?xml version='1.0' encoding='windows-1252'?> <Wix xmlns='http://schemas.microsoft.com/wix/2006/wi' xmlns:iis='http://schemas.microsoft.com/wix/IIsExtension'> <Product Name='Daisy Web Site 1.0' Id='BB7FBBE4-0A25-4cc7-A39C-AC916B665220' UpgradeCode='8A5311DE-A125-418f-B0E1-5A30B9C667BD' Language='1033' Codepage='1252' Version='1.0.0' Manufacturer='the man'> <Package Id='5F341544-4F95-4e01-A2F8-EF74448C0D6D' Keywords='Installer' Description="desc" Manufacturer='the man' InstallerVersion='100' Languages='1033' Compressed='yes' SummaryCodepage='1252' /> <Media Id='1' Cabinet='Sample.cab' EmbedCab='yes' DiskPrompt="CD-ROM #1" /> <Property Id='DiskPrompt' Value="the man" /> <PropertyRef Id="NETFRAMEWORK35"/> <Condition Message='This setup requires the .NET Framework 3.5.'> <![CDATA[Installed OR (NETFRAMEWORK35)]]> </Condition> <Feature Id='DaisyFarmer' Title='DaisyFarmer' Level='1'> <ComponentRef Id='SchedulerComponent' /> </Feature> </Product> </Wix> The fragment I'm referencing is (Scheduler.wxs): <?xml version="1.0" encoding="utf-8"?> <Wix xmlns="http://schemas.microsoft.com/wix/2006/wi"> <Fragment> <DirectoryRef Id="TARGETDIR"> <Directory Id="dir2787390E4B7313EB8005DE08108EFEA4" Name="scheduler"> <Component Id="SchedulerComponent" Guid="{9254F7E1-DE41-4EE5-BC0F-BA668AF051CB}"> <File Id="fil9A013D0BFB837BAC71FED09C59C5501B" KeyPath="yes" Source="SourceDir\DTBookMonitor.exe" /> <File Id="fil4F0D8D05F53E6AFBDB498E7C75C2D98F" KeyPath="no" Source="SourceDir\DTBookMonitor.exe.config" /> <File Id="filF02F4686267D027CB416E044E8C8C2FA" KeyPath="no" Source="SourceDir\monitor.bat" /> <File Id="fil05B8FF38A3C85FE6C4A58CD6FDFCD2FB" KeyPath="no" Source="SourceDir\output.txt" /> <File Id="fil397F04E2527DCFDF7E8AC1DD92E48264" KeyPath="no" Source="SourceDir\pipelineOutput.txt" /> <File Id="fil83DFACFE7F661A9FF89AA17428474929" KeyPath="no" Source="SourceDir\process.bat" /> <File Id="fil2809039236E0072642C52C6A52AD6F2F" KeyPath="no" Source="SourceDir\README.txt" /> </Component> </Directory> </DirectoryRef> </Fragment> </Wix> I then run the following commands: candle -ext WixUtilExtension -ext WiXNetFxExtension DaisyFarmer.wxs Scheduler.wxs light -sice:ICE20 -ext WixUtilExtension -ext WiXNetFxExtension Scheduler.wixobj DaisyFarmer.wixobj -out DaisyFarmer.msi I'm getting an error when I run light.exe which says "DaisyFarmer.wxs(20) : error LGHT0094 : Unresolved reference to symbol 'Component:SchedulerComponent' in section 'Product:{BB7FBBE4-0A25-4CC7-A39C-AC916B665220}'." What am I missing?

  Read the article

• Installing Monodevelop from the SVN on Ubuntu 10.04

  - by celil

  I wrote the following script to install the svn version of MonoDevelop #!/usr/bin/env bash PREFIX=/opt/local check_errs() { if [[ $? -ne 0 ]]; then echo "${1}" exit 1 fi } download() { if [ ! -d ${1} ] then svn co http://anonsvn.mono-project.com/source/trunk/${1} else (cd ${1}; svn update) fi } download mono download mcs download libgdiplus ( cd mono ./autogen.sh --prefix=$PREFIX make make install check_errs ) ( cd libgdiplus ./autogen.sh --prefix=$PREFIX make make install check_errs ) download monodevelop export PKG_CONFIG_PATH=${PREFIX}/lib/pkgconfig ( cd monodevelop ./configure --prefix=$PREFIX --select check_errs make check_errs ) Everything works fine until the last make step for the monodevelop pacakge, where the script exits with the error: ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(320,82): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(325,49): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(345,115): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `SyncMethod' and no extension method `SyncMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) ./MonoDevelop.WebReferences/MoonlightChannelBaseExtension.cs(365,82): error CS1061: Type `System.ServiceModel.Description.OperationContractGenerationContext' does not contain a definition for `BeginMethod' and no extension method `BeginMethod' of type `System.ServiceModel.Description.OperationContractGenerationContext' could be found (are you missing a using directive or an assembly reference?) Compilation failed: 4 error(s), 1 warnings make[4]: *** [../../../build/AddIns/MonoDevelop.WebReferences/MonoDevelop.WebReferences.dll] Error 1 make[4]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src/addins/MonoDevelop.WebReferences' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src/addins' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/drufat/Desktop/Checkout/mono/monodevelop/main' make: *** [all-recursive] Error 1 Any ideas on how to fix this? I suppose the build gets mixed up with the default installation of mono in Ubuntu, and is looking for a symbol that is not present there. My build configuration looks as follows: 1. [X] main 2. [ ] extras/JavaBinding 3. [ ] extras/BooBinding 4. [X] extras/ValaBinding 5. [ ] extras/AspNetEdit 6. [ ] extras/GeckoWebBrowser 7. [ ] extras/WebKitWebBrowser 8. [ ] extras/MonoDevelop.Database 9. [ ] extras/MonoDevelop.Profiling 10. [ ] extras/MonoDevelop.AddinAuthoring 11. [ ] extras/MonoDevelop.CodeAnalysis 12. [ ] extras/MonoDevelop.Debugger.Mdb 13. [ ] extras/MonoDevelop.Debugger.Gdb 14. [ ] extras/PyBinding 15. [ ] extras/MonoDevelop.IPhone 16. [ ] extras/MonoDevelop.MeeGo

  Read the article

• XCode linking error when targeting armv7.

  - by Tom

  I've already spent countless hours puzzling over this, utilizing Google searches and other Stack Overflow questions to no avail. I have an iPhone/iPad universal application, which seems to compile fine when the target is armv6. However, when the device is iPad, I get this warning: warning: building for SDK 'Device - iPhone OS 3.2' requires an armv7 architecture. Oddly enough, the app still runs great on iPad in spite of this warning. However, I do want to do things the "right way" what ever that means in this case. When I switch the target architecture to armv7, I get linking errors: "___restore_vfp_d8_d15_regs", referenced from: *redacted* "___save_vfp_d8_d15_regs", referenced from: *redacted* ld: symbol(s) not found collect2: ld returned 1 exit status The "redacted" portions of the errors are references to the static library to which I'm trying to link. Here's what I've tried from the many suggestions online. Each of these were suggested more than once without any explanation, which leads me to believe nobody quite understands this problem: "Never use the drop down menu in the upper left of the XCode window to choose the target. Instead, set this to Base SDK and then the Base SDK to iPhone OS 3.0 in the target configuration. Set the target device to your preferred target (iPad, iPhone OS 3.2 in my situation.)" This yields the error "Library not found for -lcrt1.3.1.o" "Make sure that GCC isn't linking against the wrong version of the standard library. (You'll have to make sure the LIBRARY_SEARCH_PATH doesn't have the wrong path in it.)" My LIBRARY_SEARCH_PATH is already empty, so this doesn't seem relevant. "Try compiling with GCC 4.0 rather than GCC 4.2." I get a syntax error inside a UIKit header file. The error is "Syntax error before 'AT_NAME' token." The line is "UIKIT_EXTERN @interface UILocalizedIndexedCollation : NSObject." Another project compiles just fine with the same target settings, which is really making me question my sanity. Could I be dealing with a corrupt XCode project? If anyone knows what's actually happening and has a reference or doesn't mind explaining it, I would be so very grateful. Cheers!

  Read the article

• Jruby Gems-in-a-jar issue

  - by antonio

  Hi all, I am trying to write some code in ruby (using jruby) to be compiled to java bytecode with jrubyc and deployed to a remote machine where it will be run on the JVM (no ruby available there). Everything works fine as long as I am happy to stick with the standard jruby library. As explained on the jruby website, I simply copy the jruby-complete.jar library to the remote machine and include it in the classpath at runtime. I fire my compiled script and it works: cool! The problems start when I need some other libraries (typically rubygems) to run my script. I am aware of cool stuff like rawr, -which I successfully tested- to put together all you need in a single package. However that is not the solution I am looking for: I will have many small scripts to run independently and I don't want each of them to grow to at least 10 MB just because I insanely include the jruby-complete.jar in each of them. What I would like is to compile a .jar for each of the libraries that I will need to use, put all of them in a common folder on the remote machine and include them at runtime in the classpath when I run my compiled jruby scripts on the JVM. This said, I tried to follow the instructions here: http://blog.nicksieger.com/articles/2009/01/10/jruby-1-1-6-gems-in-a-jar I tried exactly the example shown there, with the "chronic" gem. Going step by step: Install the gem locally: java -jar jruby-complete-1.1.6.jar -S gem install -i ./chronic chronic --no-rdoc --no-ri Package it into a jar: jar cf chronic.jar -C chronic . Write a two lines test script, saving it as testt.rb: require 'chronic' Chronic.parse('tomorrow') Compile with: jrubyc testt.rb Run the resulting java class testt.class with the following (having both jruby-complete.jar and chronic.jar in the same folder as the java class): java -cp .:/jruby-complete.jar:./chronic.jar testt I get the following error: Exception in thread "main" file:/Users/ave2/NetBeansProjects/jrubywatir/lib/jruby-complete.jar!/METAINF/jruby.home/lib/ruby/site_ruby/shared/builtin/core_ext/symbol.rb:1:in `const_missing': uninitialized constant Chronic (NameError) from testt.rb:2 ...internal jruby stack elided... from Module.const_missing(testt.rb:2) from (unknown).(unknown)(:1) I really don't understand what I am doing wrong, and I am totally stuck on this. I am a noob in Ruby, much more used to Python: don't miss a chance to convert an infidel! :-) Thanks.

  Read the article

• ! Extra }, or forgotten \endgroup. latex

  - by gzou

  hey, I met these latex format problem, anyone can offer some help? the .tex file: \begin{table}{} \renewcommand{\arraystretch}{1.1} \caption{Cambridge Flow feature definition and description} \label{cambridge-feature}} \centering \begin{tabular}{|c|c|} \hline\bfseries Abbreviation &\bfseries Description\\ \hline serv-port & Server port\\ \hline clnt-port & Client port\\ \hline push-pkts-serv & count of all packets with\\ & push bit set in TCP header (server to client)\\ \hline init-win-bytes-clnt & the total number of bytes \\ & sent in initial window (client to server)\\ \hline init-win-bytes-serv & the total number of bytes sent\\ & in initial window (server to client)\\ \hline avg-seg-size-clnt & average segment size: \\ & data bytes devided by number of packets\\ \hline IP-bytes-med-clnt & median of total bytes in IP packet\\ \hline act-data-pkt-serv & count of packet with at least one byte \\ & of TCP data playload (server to client)\\ \hline data-bytes-var-clnt & variance of total \\ & bytes in packets (client to server)\\ \hline min-seg-size-serv & minimum segment size \\ & observed (server to client)\\ \hline RTT-samples-serv & total number of RTT samples\\ & found (server to client),\\ & {\bf see also \cite{Moore05discriminators}}\\ \hline push-pkts-clnt & count of all packets with push bit set \\ & in TCP header (server to client)\\ \hline \end{tabular} \end{table} and the error message: ! Extra }, or forgotten \endgroup. \@endfloatbox ...pagefalse \outer@nobreak \egroup \color@endbox l.892 \end{table} I've deleted a group-closing symbol because it seems to be spurious, as in $x}$'. But perhaps the } is legitimate and you forgot something else, as in\hbox{$x}'. In such cases the way to recover is to insert both the forgotten and the deleted material, e.g., by typing `I$}'. there is no $ in my table, also this { are matching with the }, and also after I comment the citation, the error remains. anyone can offer help? really appreciate all the comments! ! Extra }, or forgotten \endgroup.

  Read the article

• copied the reachability-test from apple, but the linker gives a failure

  - by nico

  i have tried to use the reachability-project published by apple to detect a reachability in an own example. i copied the most initialization, but i get this failure in the linker: Ld build/switchViews.build/Debug-iphoneos/test.build/Objects-normal/armv6/test normal armv6 cd /Users/uid04100/Documents/TEST setenv IPHONEOS_DEPLOYMENT_TARGET 3.1.3 setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr/bin:/usr/bin:/bin:/usr/sbin:/sbin" /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 -arch armv6 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.3.sdk -L/Users/uid04100/Documents/TEST/build/Debug-iphoneos -F/Users/uid04100/Documents/TEST/build/Debug-iphoneos -filelist /Users/uid04100/Documents/TEST/build/switchViews.build/Debug-iphoneos/test.build/Objects-normal/armv6/test.LinkFileList -dead_strip -miphoneos-version-min=3.1.3 -framework Foundation -framework UIKit -framework CoreGraphics -o /Users/uid04100/Documents/TEST/build/switchViews.build/Debug-iphoneos/test.build/Objects-normal/armv6/test Undefined symbols: "_SCNetworkReachabilitySetCallback", referenced from: -[Reachability startNotifer] in Reachability.o "_SCNetworkReachabilityCreateWithAddress", referenced from: +[Reachability reachabilityWithAddress:] in Reachability.o "_SCNetworkReachabilityScheduleWithRunLoop", referenced from: -[Reachability startNotifer] in Reachability.o "_SCNetworkReachabilityGetFlags", referenced from: -[Reachability connectionRequired] in Reachability.o -[Reachability currentReachabilityStatus] in Reachability.o "_SCNetworkReachabilityUnscheduleFromRunLoop", referenced from: -[Reachability stopNotifer] in Reachability.o "_SCNetworkReachabilityCreateWithName", referenced from: +[Reachability reachabilityWithHostName:] in Reachability.o ld: symbol(s) not found collect2: ld returned 1 exit status my delegate.h: import @class Reachability; @interface testAppDelegate : NSObject { UIWindow *window; UINavigationController *navigationController; Reachability* hostReach; Reachability* internetReach; Reachability* wifiReach; } @property (nonatomic, retain) IBOutlet UIWindow *window; @property (nonatomic, retain) IBOutlet UINavigationController *navigationController; @end my delegate.m: import "testAppDelegate.h" import "SecondViewController.h" import "Reachability.h" @implementation testAppDelegate @synthesize window; @synthesize navigationController; (void) updateInterfaceWithReachability: (Reachability*) curReach { if(curReach == hostReach) { BOOL connectionRequired= [curReach connectionRequired]; if(connectionRequired) { //in these brackets schould be some code with sense, if i´m getting it to run } else { } } if(curReach == internetReach) { } if(curReach == wifiReach) { } } //Called by Reachability whenever status changes. - (void) reachabilityChanged: (NSNotification* )note { Reachability* curReach = [note object]; NSParameterAssert([curReach isKindOfClass: [Reachability class]]); [self updateInterfaceWithReachability: curReach]; } (void)applicationDidFinishLaunching:(UIApplication *)application { // Override point for customization after application launch // Observe the kNetworkReachabilityChangedNotification. When that notification is posted, the // method "reachabilityChanged" will be called. // [[NSNotificationCenter defaultCenter] addObserver: self selector: @selector(reachabilityChanged:) name: kReachabilityChangedNotification object: nil]; //Change the host name here to change the server your monitoring hostReach = [[Reachability reachabilityWithHostName: @"www.apple.com"] retain]; [hostReach startNotifer]; [self updateInterfaceWithReachability: hostReach]; internetReach = [[Reachability reachabilityForInternetConnection] retain]; [internetReach startNotifer]; [self updateInterfaceWithReachability: internetReach]; wifiReach = [[Reachability reachabilityForLocalWiFi] retain]; [wifiReach startNotifer]; [self updateInterfaceWithReachability:wifiReach]; [window addSubview:[navigationController view]]; [window makeKeyAndVisible]; } (void)dealloc { [navigationController release]; [window release]; [super dealloc]; } @end

  Read the article

• VS 2008 irritating copy constructor link dependency

  - by Paul Hollingsworth

  Hi guys, I've run into the following annoying and seemingly incorrect behaviour in the Visual Studio 2008 C++ compiler: Suppose I have a class library - Car.lib - that uses a "Car" class, with a header called "Car.h": class Car { public: void Drive() { Accelerate(); } void Accelerate(); }; What I'm actually trying to do is use the Car headers (for some other functions), but without having to link with Car.lib itself (the actual class is not called "Car" but I am sanitising this example). If I #include "Car.h" in the .cpp file used to build a managed C++ .dll, but never refer to Car, everything compiles and links fine. This is because I never instantiate a Car object. However, the following: namespace { class Car { public: Car(const Car& rhs) { Accelerate(); } void Accelerate(); }; } leaves me with the link error: Error 2 error LNK2001: unresolved external symbol "public: void __thiscall `anonymous namespace'::Car::Accelerate(void)" (?Accelerate@Car@?A0xce3bb5ed@@$$FQAEXXZ) CREObjectWrapper.obj CREObjectBuilderWrapper Note I've declared the whole thing inside an anonymous namespace so there's no way that the Car functions could be exported from the .DLL in any case. Declaring the copy constructor out-of-line makes no difference. i.e. the following also fails to link: class Car { public: Car(const Car& rhs); void Accelerate(); }; Car::Car(const Car& rhs) { Accelerate(); } It's something specifically to do with the copy constructor note, because the following, for example, does link: class Car { public: Car() { Accelerate(); } void Accelerate(); }; I am not a C++ standards guru but this doesn't seem correct to me. Surely the compiler still should not have had to even generate any code that calls the Car copy constructor. Can anyone confirm if this behaviour is correct? It's been a while since I used C++ - but I don't think this used to be an issue with Visual Studio 6.0 for example. Can anyone suggest a workaround that allows one to "re-use" the Accelerate method from within the copy constructor and still have the copy constructor declared inline?

  Read the article

• compiling numpy with sunperf atlas libraries

  - by user288558

  I would like to use the sunperf libraries when compiling scipy and numpy. I tried using setupscons.py which seems to check from SUNPERF libraries, but it didnt recognize where mine are: here is a listing of /pkg/linux/SS12/sunstudio12.1 (thats where the sunperf library lives): wkerzend@mosura:/home/wkerzend>ls /pkg/linux/SS12/sunstudio12.1/lib/ CCios/ libdbx_agent.so@ libsunperf.so.3@ amd64/ libfcollector.so@ libtha.so@ collector.jar@ libfsu.so@ libtha.so.1@ dbxrc@ libfsu.so.1@ locale/ debugging.so@ libfui.so@ make.rules@ er.rc@ libfui.so.1@ rw7/ libblacs_openmpi.so@ librtc.so@ sse2/ libblacs_openmpi.so.1@ libscalapack.so@ stlport4/ libcollectorAPI.so@ libscalapack.so.1@ svr4.make.rules@ libcollectorAPI.so.1@ libsunperf.so@ tools_svc_mgr@ I tried to specify this directory in sites.cfg, but I still get the following errors: Checking if g77 needs dummy main - MAIN__. Checking g77 name mangling - '_', '', lower-case. Checking g77 C compatibility runtime ...-L/usr/lib/gcc/x86_64-redhat-linux/3.4.6 - L/usr/lib/gcc/x86_64-redhat-linux/3.4.6 -L/usr/lib/gcc/x86_64-redhat- linux/3.4.6/../../../../lib64 -L/usr/lib/gcc/x86_64-redhat-linux/3.4.6/../../.. -L/lib/../lib64 -L/usr/lib/../lib64 -lfrtbegin -lg2c -lm Checking MKL ... Failed (could not check header(s) : check config.log in build/scons/scipy/integrate for more details) Checking ATLAS ... Failed (could not check header(s) : check config.log in build/scons/scipy/integrate for more details) Checking SUNPERF ... Failed (could not check symbol cblas_sgemm : check config.log in build/scons/scipy/integrate for more details)) Checking Generic BLAS ... yes Checking for BLAS (Generic BLAS) ... Failed: BLAS (Generic BLAS) test could not be linked and run Exception: Could not find F77 BLAS, needed for integrate package: File "/priv/manana1/wkerzend/install_dir/scipy-0.7.1/scipy/integrate/SConstruct", line 2: GetInitEnvironment(ARGUMENTS).DistutilsSConscript('SConscript') File "/home/wkerzend/python_coala/numscons-0.10.1-py2.6.egg/numscons/core/numpyenv.py", line 108: build_dir = '$build_dir', src_dir = '$src_dir') File "/priv/manana1/wkerzend/python_coala/numscons-0.10.1-py2.6.egg/numscons/scons-local/scons-local-1.2.0/SCons/Script/SConscript.py", line 549: return apply(_SConscript, [self.fs,] + files, subst_kw) File "/priv/manana1/wkerzend/python_coala/numscons-0.10.1-py2.6.egg/numscons/scons-local/scons-local-1.2.0/SCons/Script/SConscript.py", line 259: exec _file_ in call_stack[-1].globals File "/priv/manana1/wkerzend/install_dir/scipy-0.7.1/build/scons/scipy/integrate/SConscript", line 15: raise Exception("Could not find F77 BLAS, needed for integrate package") error: Error while executing scons command. See above for more information. If you think it is a problem in numscons, you can also try executing the scons command with --log-level option for more detailed output of what numscons is doing, for example --log-level=0; the lowest the level is, the more detailed the output it.----- any help is appreciated Wolfgang

  Read the article

• indentationLevelForRowAtIndexPath not indenting custom cell

  - by Xetius

  I have overridden the tableView:indentationLevelForRowAtIndexPath method in my UITableViewController derived class as follows: - (NSInteger)tableView:(UITableView *)tableView indentationLevelForRowAtIndexPath:(NSIndexPath *)indexPath { NSDictionary* item = [self.projects objectAtIndex:indexPath.row]; int indentationLevel = [[item objectForKey:@"indent"] intValue]; DLog (@"Indentation Level for Row %d : %d", indexPath.row, indentationLevel); return indentationLevel; } I initially thought that this was not being called but that was operator error (err, mine) and I hadn't defined the symbol DEBUG=1. However, it is being called (duh me!) and this is the log output: -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 0 : 1 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 1 : 1 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 2 : 2 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 3 : 2 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 4 : 2 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 5 : 1 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 6 : 2 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 7 : 2 -[RootViewController tableView:indentationLevelForRowAtIndexPath:] [Line 129] Indentation Level for Row 8 : 1 But, this is not affecting the layout of the cells. No indentation. This is my itemCellForRowAtIndexPath implementation, if that makes any difference: -(UITableViewCell*)tableView:(UITableView *)tableView itemCellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString* cellIdentifier = @"projectItemCell"; ProjectItemTableViewCell* cell = (ProjectItemTableViewCell*)[tableView dequeueReusableCellWithIdentifier:cellIdentifier]; if (cell == nil) { NSArray* nib = [[NSBundle mainBundle] loadNibNamed:@"ProjectItemTableViewCell" owner:self options:nil]; for (id oneObject in nib) { if ([oneObject isKindOfClass:[ProjectItemTableViewCell class]]) { cell = (ProjectItemTableViewCell*)oneObject; } } } NSDictionary* item = [self.projects objectAtIndex:indexPath.row]; cell.projectDescLabel.text = [item objectForKey:@"name"]; cell.itemCountlabel.text = [NSString stringWithFormat:@"%d", [[item objectForKey:@"cache_count"] intValue]]; cell.itemCountlabel.backgroundColor = [UIColor colorForHex:[item objectForKey:@"color"]]; cell.indentationWidth = 20; return cell; } How do I indent a custom UITableViewCell which I have defined in Interface Builder? If I change the itemCellForRowAtIndexPath to use a default UITableViewCell with the code below, then it indents fine. static NSString* cellIdentifier = @"projectItemCell"; UITableViewCell* cell = [tableView dequeueReusableCellWithIdentifier:cellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:cellIdentifier] autorelease]; } NSDictionary* item = [self.projects objectAtIndex:indexPath.row]; cell.textLabel.text = [item objectForKey:@"name"]; cell.indentationWidth = 40; return cell;

  Read the article

• Subroutine & GoTo design

  - by sub

  I have a strange question concerning subroutines: As I'm creating a minimal language and I don't want to add high-level loops like while or for I was planning on just adding gotos to keep it Turing-Complete. Now I thought, eww - gotos - I wouldn't want to program in that language if I had to use gotos so often. So I thought about adding subroutines instead. I see the difference as the following: gotos Go to (captain obvious) a previously defined point and continue executing the program from there. Leads to hardly understandable and buggy code, I think that's a fact. subroutines Similiar: You define their starting point somewhere, as you call them the program jumps there - but the subroutine can go back to the point it was called from with return. Okay. Why didn't I just add the more function-like, nice looking subroutines? Because: In order to make return work if I call subroutines from within subroutines from within other subroutines, I'd have to use a stack containing the point where the currently running subroutine came from at top. That would then mean that I would, if I create loops using the subroutines, end up with an extremely memory-eating, overflowing stack with return locations. Not good. Don't think of my subroutines as functions. They are just gotos that return to the point they were called from, they don't actually give back values like the return x; statement in nearly all today's languages. Now to my actual questions: How can I solve the above problem with the stack overflow on loops with subroutines? Do I have to add a separate goto language construct without the return option? Assembler doesn't have loops but as I have seen myJumpPoint:, jnz, jz, retn. That means to me that there must also be a stack containing all the return locations. Am I right with that? What about long running loops then? Don't they overflow the stack/eat memory then? Am I getting the retn symbol in assembler totally wrong? If yes, please explain it to me.

  Read the article

• compiling opencv 2.4 on a 64 bit mac in Xcode

  - by Walt

  I have an opencv project that I've been developing under ubuntu 12.04, on a parellels VM on a mac which has an x86_64 architecture. There have been many screen switching performance issues that I believe are due to the VM, where linux video modes flip around for a couple seconds while camera access is made by the opencv application. I decided to moved the project into Xcode on the mac side of the computer to continue the opencv development. However, I'm not that familiar with xcode and am having trouble getting the project to build correctly there. I have xcode installed. I downloaded and decompressed the latest version of opencv on the mac, and ran: ~/src/opencv/build/cmake-gui -G Xcode .. per the instructions from willowgarage and various other locations. This appeared to work fine (however I'm wondering now if I'm missing an architecture setting in here, although it is 64-bit intel in Xcode). I then setup an xcode project with the source files from the linux project and changed the include directories to use /opt/local/include/... rather than the /usr/local/include/... I switched xcode to use the LLVM GCC compiler in the build settings for the project then set the Apple LLVM Dialog for C++ to Language Dialect to GNU++11 (which seems possibly inconsistant with the line above) I'm not using a makefile in xcode, (that I'm aware of - it has its own project file...) I was also running into a linker issue that looked like they may be resolved with the addition of this linker flag: -lopencv_video based on a similar posting here: other thread however in that case the person was using a Makefile in their project. I've tried adding this linker flag under "Other Linker Flags" in xcode build settings but still get build errors. I think I may have two issues here, one with the architecture settings when building the opencv libraries with Cmake, and one with the linker flag settings in my project. Currently the build error list looks like this: Undefined symbols for architecture x86_64: "cv::_InputArray::_InputArray(cv::Mat const&)", referenced from: _main in main.o "cv::_OutputArray::_OutputArray(cv::Mat&)", referenced from: _main in main.o "cv::Mat::deallocate()", referenced from: cv::Mat::release() in main.o "cv::Mat::copySize(cv::Mat const&)", referenced from: cv::Mat::Mat(cv::Mat const&)in main.o cv::Mat::operator=(cv::Mat const&)in main.o "cv::Mat::Mat(_IplImage const*, bool)", referenced from: _main in main.o "cv::imread(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, int)", referenced from: _main in main.o ---SNIP--- ld: symbol(s) not found for architecture x86_64 collect2: ld returned 1 exit status Can anyone provide some guidance on what to try next? Thanks, Walt

  Read the article

• Pylucene in Python 2.6 + MacOs Snow Leopard

  - by jbastos

  Greetings, I'm trying to install Pylucene on my 32-bit python running on Snow Leopard. I compiled JCC with success. But I get warnings while making pylucene: ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/__init__.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/__wrap01__.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/__wrap02__.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/__wrap03__.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/functions.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/JArray.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/JObject.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/lucene.o, file is not of required architecture ld: warning: in build/temp.macosx-10.6-i386-2.6/build/_lucene/types.o, file is not of required architecture ld: warning: in /Developer/SDKs/MacOSX10.4u.sdk/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/JCC-2.3-py2.6-macosx-10.3-fat.egg/libjcc.dylib, file is not of required architecture ld: warning: in /Developer/SDKs/MacOSX10.4u.sdk/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/JCC-2.3-py2.6-macosx-10.3-fat.egg/libjcc.dylib, file is not of required architecture build of complete Then I try to import lucene: MacBookPro:~/tmp/trunk python Python 2.6.3 (r263:75184, Oct 2 2009, 07:56:03) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "help", "copyright", "credits" or "license" for more information. >>> import pylucene Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named pylucene >>> import lucene Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/lucene-2.9.0-py2.6-macosx-10.6-i386.egg/lucene/__init__.py", line 7, in <module> import _lucene ImportError: dlopen(/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/lucene-2.9.0-py2.6-macosx-10.6-i386.egg/lucene/_lucene.so, 2): Symbol not found: __Z8getVMEnvP7_object Referenced from: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/lucene-2.9.0-py2.6-macosx-10.6-i386.egg/lucene/_lucene.so Expected in: flat namespace in /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/lucene-2.9.0-py2.6-macosx-10.6-i386.egg/lucene/_lucene.so >>> Any hints?

  Read the article

• cu3er background issue

  - by bradenkeith

  I'm using a set of PNGs to run my cu3er slides. They keep the transparency, until the transition and then they're boxed with a white background. Is there a way to either keep it transparent or set the background color? http://205.186.139.193/ is the test site Javascript: <script type="text/javascript"> var flashvars = {}; flashvars.xml = "<?php bloginfo('stylesheet_directory');?>/slider/cu3er.php"; flashvars.font = "font.swf"; var attributes = {}; attributes.wmode = "transparent"; attributes.id = "slider"; swfobject.embedSWF("<?php bloginfo('stylesheet_directory');?>/slider/cu3er.swf", "cu3er-container", "963", "283", "9", "expressInstall.swf", flashvars, attributes); </script> CSS: #cu3er-container{ background: #000; } #header_cu3er { background: #000; } cu3er Settings: <cu3er> <settings> <auto_play > <defaults symbol="circular" /> <tweenIn tint="0xFFFFFF" alpha="0.65" /> <tweenOut tint="0xffffff" alpha="0" /> <tweenOver alpha="0" /> </auto_play> <prev_button> <defaults round_corners="5,5,5,5"/> <tweenOver tint="0xFFFFFF" scaleX="1.1" scaleY="1.1"/> <tweenOut tint="0x000000" /> </prev_button> <prev_symbol> <tweenOver tint="0x000000" /> </prev_symbol> <next_button> <defaults round_corners="5,5,5,5"/> <tweenOver tint="0xFFFFFF" scaleX="1.1" scaleY="1.1"/> <tweenOut tint="0x000000" /> </next_button> <next_symbol> <tweenOver tint="0x000000" /> </next_symbol> </settings>

  Read the article

• SET game odds simulation (MATLAB)

  - by yuk

  Here is an interesting problem for your weekend. :) I recently find the great card came - SET. Briefly, there are 81 cards with the four features: symbol (oval, squiggle or diamond), color (red, purple or green), number (one, two or three) or shading (solid, striped or open). The task is to find (from selected 12 cards) a SET of 3 cards, in which each of the four features is either all the same on each card or all different on each card (no 2+1 combination). In my free time I've decided to code it in MATLAB to find a solution and to estimate odds of having a set in randomly selected cards. Here is the code: %% initialization K = 12; % cards to draw NF = 4; % number of features (usually 3 or 4) setallcards = unique(nchoosek(repmat(1:3,1,NF),NF),'rows'); % all cards: rows - cards, columns - features setallcomb = nchoosek(1:K,3); % index of all combinations of K cards by 3 %% test tic NIter=1e2; % number of test iterations setexists = 0; % test results holder % C = progress('init'); % if you have progress function from FileExchange for d = 1:NIter % C = progress(C,d/NIter); % cards for current test setdrawncardidx = randi(size(setallcards,1),K,1); setdrawncards = setallcards(setdrawncardidx,:); % find all sets in current test iteration for setcombidx = 1:size(setallcomb,1) setcomb = setdrawncards(setallcomb(setcombidx,:),:); if all(arrayfun(@(x) numel(unique(setcomb(:,x))), 1:NF)~=2) % test one combination setexists = setexists + 1; break % to find only the first set end end end fprintf('Set:NoSet = %g:%g = %g:1\n', setexists, NIter-setexists, setexists/(NIter-setexists)) toc 100-1000 iterations are fast, but be careful with more. One million iterations takes about 15 hours on my home computer. Anyway, with 12 cards and 4 features I've got around 13:1 of having a set. This is actually a problem. The instruction book said this number should be 33:1. And it was recently confirmed by Peter Norvig. He provides the Python code, but I didn't test it. So can you find an error?

  Read the article

• CoGetClassObject gives many First-chance exceptions in ATL project. Should I worry?

  - by Andrew

  Hello, I have written a COM object that in turn uses a thrid party ActiveX control. In my FinalConstruct() for my COM object, I instantiate the ActiveX control with the follow code: HRESULT hRes; LPCLASSFACTORY2 pClassFactory; hRes = CoInitializeEx(NULL,COINIT_APARTMENTTHREADED); bool bTest = SUCCEEDED(hRes); if (!bTest) return E_FAIL; if (SUCCEEDED(CoGetClassObject(__uuidof(SerialPortSniffer), CLSCTX_INPROC_SERVER, NULL, IID_IClassFactory2, (LPVOID *)(&pClassFactory)))) { ... more set up code When I step over the line if (SUCCEEDED(CoGetClassObject(__uuidof(SerialPortSniffer), ..., I get 20+ lines in the Output window stating: First-chance exception at 0x0523f82e in SillyComDriver.exe: 0xC0000005: Access violation writing location 0x00000000. I also get the lines: First-chance exception at 0x051e3f3d in SillyComDriver.exe: 0xC0000096: Privileged instruction. First-chance exception at 0x100ab9e6 in SillyComDriver.exe: 0xC000001D: Illegal Instruction. Notice these are first-chance exceptions. The program runs as expected I can access the third party methods/properties. Still, I'm left wondering why they are occurring. Perhaps my way of instantiating the ActiveX control (for which I want use of it's methods/properties and not it's GUI stuff) is incorrect? Besides the code I'm showing, I also put the line import "spsax.dll" no_namespace in the stdafx.h That's all the code necessary for my simple demo project. I noticed this problem because I had (inadvertently) set the "break on exceptions" options in my "real" project and it was breaking on this line. Once I removed it, it also works. If you're read this far thank you, and perhaps I can ask one other minor question. In my demo project, if I right click on SerialPortSniffer and "go to definition", it takes me to the file C:....\AppData\Local\Temp\spsax.tlh. Can someone explain that? Finally, in my "real" project, right clicking on SerialPortSniffer and going to difinition leads to "The symbol 'SerialPortSniffer' is not defined". It doesn't seem to affect the program though. Is there some setting I've messed up? By the way, all my code is written w/ VS2008. Thanks, Dave

  Read the article

• can not access MovieClip properties in flashDevelop

  - by numerical25

  I know there is something I am doing wrong. In my controls I have keydown events that control my hero. As of right now, I am trying to rotate my hero but he refuses to turn . Below is my Hero Class, my control class, and gameobject class. pretty much all the classes associate with the controls class. package com.Objects { import com.Objects.GameObject; /** * ... * @author Anthony Gordon */ [Embed(source='../../../bin/Assets.swf', symbol='OuterRim')] public class Hero extends GameObject { public function Hero() { } } } Here is my Controls class. This is the class where I am trying to rotate my hero but he doesnt. The keydown event does work cause I trace it. package com.Objects { import com.Objects.Hero; import flash.events.*; import flash.display.MovieClip; /** * ... * @author Anthony Gordon */ public class Controls extends GameObject { private var aKeyPress:Array; public var ship:Hero; public function Controls(ship:Hero) { this.ship = ship; IsDisplay = false; aKeyPress = new Array(); engine.sr.addEventListener(KeyboardEvent.KEY_DOWN, keyDownListener); engine.sr.addEventListener(KeyboardEvent.KEY_UP,keyUpListener); } private function keyDownListener(e:KeyboardEvent):void { //trace("down e.keyCode=" + e.keyCode); aKeyPress[e.keyCode] = true; trace(e.keyCode); } private function keyUpListener(e:KeyboardEvent):void { //trace("up e.keyCode=" + e.keyCode); aKeyPress[e.keyCode]=false; } override public function UpdateObject():void { Update(); } private function Update():void { if (aKeyPress[37])//Key press left ship.rotation += 3,trace(ship.rotation ); ///DOESNT ROtate }//End Controls } } Here is GameObject Class package com.Objects { import com.Objects.Engine; import com.Objects.IGameObject; import flash.display.MovieClip; /** * ... * @author Anthony Gordon */ public class GameObject extends MovieClip implements IGameObject { private var isdisplay:Boolean = true; private var garbage:Boolean; public static var engine:Engine; public var layer:Number = 0; public function GameObject() { } public function UpdateObject():void { } public function GarbageCollection():void { } public function set Garbage(garb:Boolean):void { garbage = garb; } public function get Garbage():Boolean { return garbage } public function get IsDisplay():Boolean { return isdisplay; } public function set IsDisplay(display:Boolean):void { isdisplay = display; } public function set Layer(l:Number):void { layer = l; } public function get Layer():Number { return layer } } }

  Read the article

• Clojure vars and Java static methods

  - by j-g-faustus

  I'm a few days into learning Clojure and are having some teething problems, so I'm asking for advice. I'm trying to store a Java class in a Clojure var and call its static methods, but it doesn't work. Example: user=> (. java.lang.reflect.Modifier isPrivate 1) false user=> (def jmod java.lang.reflect.Modifier) #'user/jmod user=> (. jmod isPrivate 1) java.lang.IllegalArgumentException: No matching method found: isPrivate for class java.lang.Class (NO_SOURCE_FILE:0) at clojure.lang.Compiler.eval(Compiler.java:4543) From the exception it looks like the runtime expects a var to hold an object, so it calls .getClass() to get the class and looks up the method using reflection. In this case the var already holds a class, so .getClass() returns java.lang.Class and the method lookup obviously fails. Is there some way around this, other than writing my own macro? In the general case I'd like to have either an object or a class in a varible and call the appropriate methods on it - duck typing for static methods as well as for instance methods. In this specific case I'd just like a shorter name for java.lang.reflect.Modifier, an alias if you wish. I know about import, but looking for something more general, like the Clojure namespace alias but for Java classes. Are there other mechanisms for doing this? Edit: Maybe I'm just confused about the calling conventions here. I thought the Lisp (and by extension Clojure) model was to evaluate all arguments and call the first element in the list as a function. In this case (= jmod java.lang.reflect.Modifier) returns true, and (.getName jmod) and (.getName java.lang.reflect.Modifier) both return the same string. So the variable and the class name clearly evaluate to the same thing, but they still cannot be called in the same fashion. What's going on here? Edit 2 Answering my second question (what is happening here), the Clojure doc says that If the first operand is a symbol that resolves to a class name, the access is considered to be to a static member of the named class... Otherwise it is presumed to be an instance member http://clojure.org/java_interop under "The Dot special form" "Resolving to a class name" is apparently not the same as "evaluating to something that resolves to a class name", so what I am trying to do here is something the dot special form does not support.

  Read the article

• Error building C program

  - by John

  Here are my 2 source files: main.c: #include <stdio.h> #include "part2.c" extern int var1; extern int array1[]; int main() { var1 = 4; array1[0] = 2; array1[1] = 4; array1[2] = 5; array1[3] = 7; display(); printf("---------------"); printf("Var1: %d", var1); printf("array elements:"); int x; for(x = 0;x < 4;++x) printf("%d: %d", x, array1[x]); return 0; } part2.c #include <stdio.h> int var1; int array1[4]; void display(void); void display(void) { printf("Var1: %d", var1); printf("array elements:"); int x; for(x = 0;x < 4;++x) printf("%d: %d", x, array1[x]); } When i try to compile the program this is what i get: Ld /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug/Test normal x86_64 cd /Users/John/Xcode/Test setenv MACOSX_DEPLOYMENT_TARGET 10.7 /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang -arch x86_64 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.7.sdk -L/Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug -F/Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug -filelist /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Intermediates/Test.build/Debug/Test.build/Objects-normal/x86_64/Test.LinkFileList -mmacosx-version-min=10.7 -o /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Products/Debug/Test ld: duplicate symbol _display in /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Intermediates/Test.build/Debug/Test.build/Objects-normal/x86_64/part2.o and /Users/John/Library/Developer/Xcode/DerivedData/Test-blxrdmnozbbrbwhcekmouessaprf/Build/Intermediates/Test.build/Debug/Test.build/Objects-normal/x86_64/main.o for architecture x86_64 clang: error: linker command failed with exit code 1 (use -v to see invocation) I am using Xcode and both files are inside of a C project called Test What is causing the error and how do i fix it?

  Read the article

• Subband decomposition using Daubechies filter

  - by misha

  I have the following two 8-tap filters: h0 ['-0.010597', '0.032883', '0.030841', '-0.187035', '-0.027984', '0.630881', '0.714847', '0.230378'] h1 ['-0.230378', '0.714847', '-0.630881', '-0.027984', '0.187035', '0.030841', '-0.032883', '-0.010597'] Here they are on a graph: I'm using it to obtain the approximation (lower subband of an image). This is a(m,n) in the following diagram: I got the coefficients and diagram from the book Digital Image Processing, 3rd Edition, so I trust that they are correct. The star symbol denotes one dimensional convolution (either over rows or over columns). The down arrow denotes downsampling in one dimension (either over rows, or columns). My problem is that the filter coefficients for h0 and h1 sum to greater than 1 (approximately 1.4 or sqrt(2) to be exact). Naturally, if I convolve any image with the filter, the image will get brighter. Indeed, here's what I get (expected result on right): Can somebody suggest what the problem is here? Why should it work if the convolution filter coefficients sum to greater than 1? I have the source code, but it's quite long so I'm hoping to avoid posting it here. If it's absolutely necessary, I'll put it up later. EDIT What I'm doing is: Decompose into subbands Filter one of the subbands Recompose subbands into original image Note that the point isn't just to have a displayable subband-decomposed image -- I have to be able to perfectly reconstruct the original image from the subbands as well. So if I scale the filtered image in order to compensate for my decomposition filter making the image brighter, this is what I will have to do: Decompose into subbands Apply intensity scaling Filter one of the subbands Apply inverse intensity scaling Recompose subbands into original image Step 2 performs the scaling. This is what @Benjamin is suggesting. The problem is that then step 4 becomes necessary, or the original image will not be properly reconstructed. This longer method will work. However, the textbook explicitly says that no scaling is performed on the approximation subband. Of course, it's possible that the textbook is wrong. However, what's more possible is I'm misunderstanding something about the way this all works -- this is why I'm asking this question.

  Read the article

• Problem on creating font using a custom ant task, which extends LWUIT's FontTask.

  - by Smithy

  Hi. I am new to LWUIT and j2me, and I am building a j2me application for showing Japanese text vertically. The phonetic symbol part of the text should be shown in relatively small font size (about half the size of the text), small Kanas need to be shown as normal ones, and some 'vertical only' characters need to be put into the Private Use Area, etc. I tried to build this font into a bitmap font using the FontTask ant task LWUIT provided, but found that it does support the customizations mentioned above. So I decided to write my own task and add those. Below is what I have achieved: 1 An ant task extending the LWUITTask task to support a new nested element <verticalfont>. public class VerticalFontBuildTask extends LWUITTask { public void addVerticalfont(VerticalFontTask anVerticalFont) { super.addFont(anVerticalFont); } } 2 The VerticalFontTask task, which extends the original FontTask. Instead of inserting a EditorFont object, it inserts a VerticalEditorFont object(derived from EditorFont) into the resource. public class VerticalFontTask extends FontTask { // some constants are omitted public VerticalFontTask() { StringBuilder sb = new StringBuilder(); sb.append(UPPER_ALPHABET); sb.append(UPPER_ALPHABET.toLowerCase()); sb.append(HALFWIDTH); sb.append(HIRAGANA); sb.append(HIRAGANA_SMALL); sb.append(KATAKANA); sb.append(KATAKANA_SMALL); sb.append(WIDE); this.setCharset(sb.toString()); } @Override public void addToResources(EditableResources e) { log("Putting rigged font into resource..."); super.addToResources(e); //antialias settings Object aa = this.isAntiAliasing() ? RenderingHints.VALUE_TEXT_ANTIALIAS_ON :RenderingHints.VALUE_TEXT_ANTIALIAS_OFF; VerticalEditorFont ft = new VerticalEditorFont( Font.createSystemFont( this.systemFace, this.systemStyle, this.systemSize), null, getLogicalName(), isCreateBitmap(), aa, getCharset()); e.setFont(getName(), ft); } VerticalEditorFont is just a bunch of methods logging to output and call the super. I am still trying to figure out how to extend it. But things are not going well: none of the methods on the VerticalEditorFont object get called when executing this task. My questions are: 1 where did I do wrong? 2 I want to embed a truetype font to support larger screens. I only need a small part of the font inside my application and I don't want it to carry a font resource weighing 1~2MB. Is there a way to extract only the characters needed and pack them into LWUIT?

  Read the article

• Make sense of Notification Watcher source objective-c

  - by Chris

  From Notification Watcher source. - (void)selectNotification:(NSNotification*)aNotification { id sender = [aNotification object]; [selectedDistNotification release]; selectedDistNotification = nil; [selectedWSNotification release]; selectedWSNotification = nil; NSNotification **targetVar; NSArray **targetList; if (sender == distNotificationList) { targetVar = &selectedDistNotification; targetList = &distNotifications; } else { targetVar = &selectedWSNotification; targetList = &wsNotifications; } if ([sender selectedRow] != -1) { [*targetVar autorelease]; *targetVar = [[*targetList objectAtIndex:[sender selectedRow]] retain]; } if (*targetVar == nil) { [objectText setStringValue:@""]; } else { id obj = [*targetVar object]; NSMutableAttributedString *objStr = nil; if (obj == nil) { NSFont *aFont = [objectText font]; NSDictionary *attrDict = italicAttributesForFont(aFont); objStr = [[NSMutableAttributedString alloc] initWithString:@"(null)" attributes:attrDict]; } else { /* Line 1 */ objStr = [[NSMutableAttributedString alloc] initWithString: [NSString stringWithFormat:@" (%@)", [obj className]]]; [objStr addAttributes:italicAttributesForFont([objectText font]) range:NSMakeRange(1,[[obj className] length]+2)]; if ([obj isKindOfClass:[NSString class]]) { [objStr replaceCharactersInRange:NSMakeRange(0,0) withString:obj]; } else if ([obj respondsToSelector:@selector(stringValue)]) { [objStr replaceCharactersInRange:NSMakeRange(0,0) withString:[obj performSelector:@selector(stringValue)]]; } else { // Remove the space since we have no value to display [objStr replaceCharactersInRange:NSMakeRange(0,1) withString:@""]; } } [objectText setObjectValue:objStr]; /* LINE 2 */ [objStr release]; } [userInfoList reloadData]; } Over at //LINE 2 objStr is being released. Is this because we are assigning it with alloc in //LINE 1? Also, why is //LINE 1 not: objStr = [NSMutableAttributedString* initWithString:@"(null)" attributes:attrDict] If I create a new string like (NSString*) str = [NSString initWithString:@"test"]; ... str = @"another string"; Would I have to release str, or is this wrong and if I do that I have to use [[NSString alloc] initWithString:@"test"]? Why isn't the pointer symbol used as in [[NSString* alloc] ...? Thanks

  Read the article

• New to MVC. Actionscript 3.0 Appreciate your help.

  - by Combustion007

  Hello Everyone, I am new to design patterns and am trying to learn the MVC implementation. I have written four classes: DataModel DataView DataController Main Main serves as the application facade. The main FLA is called HelloWorld. I have a symbol called "Box" in HelloWorld. I just would like to add an instance of the "Box" on the stage. Eventually I would like to place a button and when the button is clicked, the Box instance color will be changed. I would appreciate any help, please help me figure out what am I doing wrong. Here are my Classes: DATAMODEL CLASS: package { import flash.events.*; public class DataModel extends EventDispatcher { public static const UPDATE:String = "modelUpdate"; private var _color:Number = (Math.round(Math.random()* 0xffffff)); public function DataModel() { trace("DATA MODEL INIT"); } public function get color():Number { return _color; } public function set color(p:Number):void { _color = p; notifyObserver(); } public function notifyObserver():void { dispatchEvent(new Event(DataModel.UPDATE)); } } } //DATACONTROLLER CLASS: package { import flash.events.; import flash.display.; import flash.errors.*; public class DataController { private var _model:DataModel; public function DataController(m:DataModel) { trace("DATACONTROLLER INIT"); _model = m; } } } DATAVIEW CLASS: package { import flash.events.; import flash.display.; import flash.errors.*; public class DataView extends Sprite { private var _model:DataModel; private var _controller:DataController; private var b:Box; public function DataView(m:DataModel, c:DataController) { _model = m; _controller = c; b = new Box(); b.x = b.y = 100; addChild(b); } } } And Finally THE FACADE: package { import flash.display.; import flash.events.; import flash.text.; import flash.errors.; public class Main extends Sprite { private var _model:DataModel; private var _controller:DataController; private var _view:DataView; public function Main(m:DataModel, c:DataController, v:DataView) { _model = m; _controller = c; _view = v; addChild(v); } } } When I test the movie: I get this error: ArgumentError: Error #1063: Argument count mismatch on Main(). Expected 3, got 0. Thanks alot.

  Read the article

• How can I set an image for background of GUI interface?

  - by enriched

  hey everyone, im having some troubles displaying the background image for a GUI interface in java. Here is what i have at the moment, and with current stage of code it shows default(gray) background. import javax.swing.*; import java.awt.event.*; import java.util.Scanner; import java.awt.*; import java.io.File; import javax.imageio.ImageIO; import java.awt.image.BufferedImage; import java.io.IOException; ////////////////////////////////// // 3nriched Games Presents: // // MIPS The Mouse!! // ////////////////////////////////// public class mipsMouseGUI extends JFrame implements ActionListener { private static String ThePDub = ("mouse"); //the password JPasswordField pass; JPanel panel; JButton btnEnter; JLabel lblpdub; public mipsMouseGUI() { BufferedImage image = null; try { //attempts to read picture from the folder image = ImageIO.read(getClass().getResource("/mousepics/mousepic.png")); } catch (IOException e) { //catches exceptions e.printStackTrace(); } ImagePanel panel = new ImagePanel(new ImageIcon("/mousepics/neonglowOnwill.png").getImage()); setIconImage(image); //sets icon picture setTitle("Mips The Mouse Login"); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); pass = new JPasswordField(5); //sets password length to 5 pass.setEchoChar('@'); //hide characters as @ symbol pass.addActionListener(this); //adds action listener add(panel); //adds panel to frame btnEnter = new JButton("Enter"); //creates a button btnEnter.addActionListener(this);// Register the action listener. lblpdub = new JLabel(" Your Password: "); // label that says enter password panel.add(lblpdub, BorderLayout.CENTER);// adds label and inputbox panel.add(pass, BorderLayout.CENTER); // to panel and sets location panel.add(btnEnter, BorderLayout.CENTER); //adds button to panel pack(); // packs controls and setLocationRelativeTo(null); // Implicit "this" if inside JFrame constructor. setVisible(true);// makes them visible (duh) } public void actionPerformed(ActionEvent a) { Object source = a.getSource(); //char array that holds password char[] passy = pass.getPassword(); //characters array to string String p = new String(passy); //determines if user entered correct password if(p.equals(ThePDub)) { JOptionPane.showMessageDialog(null, "Welcome beta user: USERNAME."); } else JOptionPane.showMessageDialog(null, "You have enter an incorrect password. Please try again."); } public class ImagePanel extends JPanel { private BufferedImage img; public ImagePanel(String img) { this(new ImageIcon(img).getImage()); } public ImagePanel(Image img) { Dimension size = new Dimension(img.getWidth(null), img.getHeight(null)); } public void paintComponent(Graphics g) { g.drawImage(img, 0, 0, null); } } }

  Read the article

• Do you use logical negation operator (!) in "if" statement or check on "== false"

  - by Taras Terebkov

  Hello everyone, I just want to conduct a little survey about code style developers prefer. For me there are two ways to write "if" in such languages as Java, C#, C++, etc. (1) Logical negation operator public void foo() { if (!SessionManager.getInstance().hasActiveSession()) { . . . . . } } (2) Check on "false" public void foo() { if (SessionManager.getInstance().hasActiveSession() == false) { . . . . . } } I always believe that first way is much worst then the second one. Cause usually you don't "read" the code, but "recognize" it in one brief look. And exclamation symbol slipped from your mind, just disturbing you somewhere on the bottom of your unconscious. And only during reading the "if" block below you understand, that the logic is opposite - no sessions in "if" On the other hand in the second way of writing, an eye immediately catches words "SessionManager", "hasActiveSession" and "false". Also for me, the situation with "true" is different. In code like class SessionManager { private bool hasSession; public void foo() { if (hasSession == true) { . . . . . } else { . . . . . } } } I find "true" superfluous. why we repeating the sentence two times? The following is shorter and quicker to catch. class SessionManager { private bool hasSession; public void foo() { if (hasSession) { . . . . . } else { . . . . . } } } What do YOU think, guys?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69  | Next Page >