Search Results

Search found 28963 results on 1159 pages for 'ubuntu on arm'.

Page 63/1159 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

  • sudo ./starling start works well but sudo service starling start fails

    - by Keating Wang
    sudo ./starling start works well but sudo service starling start fails $ sudo ./starling start * Starting Starling Server... [ OK ] $ sudo ./starling stop * Stop Starling Server... [ OK ] $ sudo service starling stop * Starting Starling Server... /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:247:in `to_specs': Could not find starling (>= 0) amongst [minitest-1.6.0, rake-0.8.7, rdoc-2.5.8] (Gem::LoadError) from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems/dependency.rb:256:in `to_spec' from /home/keating/.rvm/rubies/ruby-1.9.2-p290/lib/ruby/site_ruby/1.9.1/rubygems.rb:1229:in `gem' from /home/keating/.rvm/gems/ruby-1.9.2-p290/bin/starling:18:in `<main>' The error above is 'cannot find gem starling' Following the starling file(located in /etc/init.d, rwxrwxrwx): set -e LOGFILE=/var/log/starling/starling.log SPOOLDIR=/var/spool/starling PORT=22122 LISTEN=127.0.0.1 PIDFILE=/var/run/starling.pid NAME=starling DESC="Starling" INSTALL_DIR=/home/keating/.rvm/gems/ruby-1.9.2-p290/bin/ DAEMON=$INSTALL_DIR/$NAME SCRIPTNAME=/etc/init.d/$NAME OPTS="-d" . /lib/lsb/init-functions d_start() { log_begin_msg "Starting Starling Server..." start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- $OPTS || log_end_msg 1 log_end_msg 0 } d_stop() { log_begin_msg "Stopping Starling Server..." start-stop-daemon --stop --quiet --pidfile $PIDFILE || log_end_msg 1 log_end_msg 0 } case "$1" in start) d_start ;; stop) d_stop ;; restart|force-reload|reload) d_stop sleep 2 d_start ;; *) echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" exit 3 ;; esac exit 0

    Read the article

  • tomcat 5.5 startup script on Ubuntu server

    - by Registered User
    Can any one share their Tomcat startup script I am looking for a tomcat start up script on a Ubuntu machine. My Ubuntu is 10.04 server. The tomcat is 5.5.30. It is in /opt/apache-tomcat-5.5.31 I tried a script #!/bin/bash # # tomcat # # chkconfig: # description: Start up the Tomcat servlet engine. # Source function library. . /lib/lsb/init-functions RETVAL=$? CATALINA_HOME="/opt/apache-tomcat-5.5.31" case "$1" in start) if [ -f $CATALINA_HOME/bin/startup.sh ]; then echo $"Starting Tomcat" /opt/apache-tomcat-5.5.31/bin/startup.sh fi ;; stop) if [ -f $CATALINA_HOME/bin/shutdown.sh ]; then echo $"Stopping Tomcat" /opt/apache-tomcat-5.5.31/bin/shutdown.sh fi ;; *) echo $"Usage: $0 {start|stop}" exit 1 ;; esac exit $RETVAL but it did not worked after a reboot. But the same script works if I do /etc/init.d/tomcat start or /etc/init.d/tomcat stop I have done update-rc.d tomcat defaults as it is a Ubuntu server but on reboot all of this fails to work.

    Read the article

  • nginx starts up before apache

    - by paullb
    I've been fumbling through setting up redmine on a unbuntu (12.04) box and somewhere along the line NginX got set up and now apache no longer loads because nginx has already grabbed the port. I tried removing NginX with the below command but that didn't seem to make any difference. When I restarted the server and pointed my web browser I still got the "Welcome to NginX" message sudo apt-get purge nginx I have confirmed that NginX is gone because when I run the above now I get as an output Package nginx is not installed, so not removed Yet everytime I start the machine it is running again. I noticed the following for the running processes (if that is helpful) root 923 0.0 0.0 76784 1280 ? Ss 03:00 0:00 nginx: master process /usr/sbin/nginx www-data 925 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 926 0.0 0.1 77092 2204 ? S 03:00 0:00 nginx: worker process www-data 927 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 928 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process Any advice for bringing back apache2 as the "default" (for lack of a better term) web server?

    Read the article

  • Viewing a large-resolution VNC server through a small-resolution viewer in Ubuntu

    - by Madiyaan Damha
    I have two Ubuntu computers, one with a large screen resolution (1920x1600) that is running the default Ubuntu VNC server. I have another computer that has a resolution of about 1200x1024 that I use to VNC into the server using the default Ubuntu VNC viewer). Now everything works fine except there are annoying scrollbars in the viewer because the server's desktop resolution is so much higher than the viewer's. Is there a way to: Scale the server's desktop down to the viewer's resolution. I know there will be a loss of image quality, but I am willing to try it out. This should be something like how Windows Media Player or VLC scales down the window (and does some interpolation of pixels). Automatically shrink the resolution of the server to the client's when I connect and scale the resolution back when I disconnect. This seems like a less attractive solution. Any other solution that gurus out there use? I am sure someone has experienced this before (annoying scroll bars) so there must be a solution out there.

    Read the article

  • Ubuntu in VirtualBox File Modified Time in Future and PHP slow file operations

    - by user1750
    For some reason, some of my files have a last modified date in the future. In addition to this, file operations in PHP are SUPER slow. For example, rebuilding the Symfony2 cache can take over 40 seconds (its takes 1-2 on my MacBook Pro). Notice the time for ListingsCRUDController.php. It just says "2012". In order see the date more clearly I ran ls --time-style="full-iso" -l For some reason it shows that this file's last modified date is ~5 hours into the future. System time: To make things more confusing, the system will intermittently speed up. Suddenly, my app will start serving requests in 1-2 seconds (down from 40 seconds) for no apparent reason. I mean I don't do anything to my code/system config - it just changes. Also, during a slow PHP request, the php5-fpm process (nginx) uses 100% of the CPU for the duration of the request. This is the second VM this has happened on and I need to know why its doing this. It has become unusable. Information About My Setup VirtualBox 4.2.0 Host: Macbook Pro Guest: Ubuntu Server 12.04 Package dkms is installed Timezones match for Ubuntu and PHP. Things I've Tried Both Apache and Nginx. APC enabled and disabled. Xdebug enabled and disabled. 1 processor up to 4 processors. 1gb memory up to 4gb memory. I've installed Ubuntu using the regular kernel and the VM kernel.

    Read the article

  • Ubuntu 13.10 on Acer V5-472 with HD 4000

    - by Hyperboreus
    I have an Acer V5-472 with intel HD4000 graphics chipset and a built-in 1366*768 display. I have installed ubuntu 13.10 amd64 in legacy boot mode with an external monitor. Installation showed no problems, I can boot from HDD and log into my system. The internal display doesn't work and I have to use an external monitor. I have tried the following (found in other threads) to no avail: Setting grub option "acpi_backlight=vendor" or "acpi_osi=Linux" or both. Installing the intel HD drivers for Linux from their homepage. Running in circles, screaming and shouting. The internal display lights up (I can change the brightness with Fn-Left and Fn-Right) but that's all. When I boot, I get a purple splash screen and from then only the external monitor works. I read somewhere that this might be a problem with kernel 3.11? Has anybody ubuntu running on an Acer V5-472? Should I change ubuntu version or use 32-bit instead? In general, how can I get the internal display to work? Edit: The settings-display dialogue shows the internal display correctly with supported resolution of 1366.

    Read the article

  • Parental Controls in Ubuntu - per user

    - by Hamish Downer
    I would like to set up parental controls on Ubuntu for a friend of mine. I want it so that the child user has the controls set, but the parent user is not restricted. To be clear, they are sharing one computer, so a router based solution won't help. And I would like a set of step by step instructions to do this. Just one way of doing it. I'm an experienced Ubuntu user, happy at the command line. I've spent quite some time googling for this along the way. I hope that the GChildCare project will eventually make this easy, but it is not ready yet. In the meantime, the WebContentControl GUI provides a way of managing parental controls, but apply them to every user on the computer (easy WebContentContol install instructions and detailed instructions, discussion and related links on ubuntuforums). The ubuntuforums post has a FAQ that states that user-specific configuration is not possible with WebContentControl, and then provides 3 links he used to help him do it. But they are far from step by step instructions. There is this thread which is notes along the way and linking to this article about squid and dansguardian. And then to these two dansguardian articles which are somewhat in depth ... So does anyone know of an existing guide to how to set up parental controls on ubuntu with some users not affected? If no one has come up with an answer after a little bit, I'll set up a community wiki answer so we can come up with a guide.

    Read the article

  • I get a Segmentation fault when doing apt-get util-linux

    - by Adam
    I've found that a lot of upgrade commands and Apache on my system are failing with Segmentation faults. I don't know if this is the main one, but a lot of packages depend on util-linux: root@myUbuntuHardyHeronServer:~# apt-get install util-linux Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: util-linux 1 upgraded, 0 newly installed, 0 to remove and 72 not upgraded. 20 not fully installed or removed. Need to get 0B/441kB of archives. After this operation, 0B of additional disk space will be used. (Reading database ... 20547 files and directories currently installed.) Preparing to replace util-linux 2.13.1-5ubuntu2 (using .../util-linux_2.13.1-5ub untu3.1_i386.deb) ... Unpacking replacement util-linux ... Segmentation fault dpkg: warning - old post-removal script returned error exit status 139 dpkg - trying script from the new package instead ... Segmentation fault dpkg: error processing /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386 .deb (--unpack): subprocess new post-removal script returned error exit status 139 Segmentation fault dpkg: error while cleaning up: subprocess post-removal script returned error exit status 139 Errors were encountered while processing: /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Ubuntu 12.04 froze during update, won't boot

    - by Cichol
    I've recently installed Ubuntu 12.04 on my laptop, and every time i tried to update it, it would freeze for a few seconds, and tell me that the updates could not be downloaded. After many, many tries I managed to get them downloaded, but then in the middle of installing them, it froze. Completely. No mouse movement, no blinking lights, no nothing. After a few hours of letting it sit there, I finally hit the power button to do a hard reset, and now when I select Ubuntu on the boot screen (Dual-boot with Windows 7), I get a blank purple screen, and then nothing. Another freeze. I've tried getting into the console, but no command I input has any visible effect. I have a ton of music stored on the partition it's in, so I'd really rather not have to reinstall. My specs, to the best of my knowledge: Clevo Corp model B7130 (Sager custom) CPU: Intel Core i5 @ 2.53gHz (4 CPUs) Graphics Card: Nvidia GeForce 425m 4096 MB RAM Drivers: Whatever comes with the download of 12.04. As a side-note, I installed Ubuntu via the Windows Installer program (wubi). Does that make a difference?

    Read the article

  • Failing to send email on Ubuntu box (Karmic Koala)

    - by user25312
    I have a home network with an XP and Ubuntu (9.10) box. I have created a small test php script for checking that I can send emails from my machine. I am using the same php.ini file with the same [mail settings], yet the file works on my XP box, and fails on the Ubuntu box. I have included the script here, hopefully, someone can spot whats going wrong: <?php // send e-mail to ... $to="[email protected]"; // Your subject $subject="Test Email"; // From //$header="from: test script"; $header='From: host-email-username@hostdomain_here' . "\r\n" . // Your message $message="Hello \r\n"; $message.="This is test\r\n"; $message.="Test again "; // send email $sentmail = mail($to,$subject,$message,$header); // if your email succesfully sent if($sentmail){ echo "Email Has Been Sent ."; } else { echo "Cannot Send Email "; } ?> The emails have been spoofed for obvious reasons, but otherwise, the script is exactly as the one I tested [Edit] I have since installed mailutils package on my Ubuntu box, now the script runs and returns 'Email has been sent'. However, the mail never arrives in my mail inbox (I've waited 1 day so far). Is there something else I need to be looking at?

    Read the article

  • apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName

    - by user35402
    I keep getting this warning when I (re)start Apache. Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] This is the content of my etc/hosts file: #127.0.0.1 hpdtp-ubuntu910 #testproject.localhost localhost.localdomain localhost #127.0.1.1 hpdtp-ubuntu910 127.0.0.1 localhost 127.0.0.1 testproject.localhost 127.0.1.1 hpdtp-ubuntu910 # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts This is the content of my /etc/apache2/sites-enabled/000-default file: <VirtualHost *:80> ServerName testproject.localhost DocumentRoot "/home/morpheous/work/websites/testproject/web" DirectoryIndex index.php <Directory "/home/morpheous/work/websites/testproject/web"> AllowOverride All Allow from All </Directory> Alias /sf /lib/vendor/symfony/symfony-1.3.2/data/web/sf <Directory "/lib/vendor/symfony/symfony-1.3.2/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> When I go to http://testproject.localhost, I get a blank page can anyone spot what I am doing wrong?

    Read the article

  • Slow old notebook Hardy => Karmic

    - by Mailo
    Hi, i have one very slow notebook from year about 2000. On the computer is running icewm with firefox (in this times chromium for testing). My question is if it's good step to upgrade the system to Karmic Koala? I can't install another OS on that. It doesn't have CD-ROM, it can't boot from flash, or network. The new wanted state is little bit faster system for browsing web and copying photos to local NAS. I don't mention hardware configuration, becouse it's real speed is really deep below the paper parameters.

    Read the article

  • MySQL moving ibdata & ib_logfile

    - by XoR
    I'm trying to move ibdata & ib_logfile on ssd drive. I tried this way, but it don't work: service mysql stop cd /var/lib/ cp -ra mysql mysql_backup cp -a mysql/ibdata1 mysql/ib_logfile* /ssd_drive/mysql my.cnf looks like this (relevant parts): innodb_log_group_home_dir=/ssd_drive/mysql innodb_data_home_dir=/ssd_drive/mysql After all changes I get following errors: InnoDB: Unable to lock /ssd_drive/mysql/ibdata1, error: 13 InnoDB: Check that you do not already have another mysqld process Do I need to remove some lock files, or there is something else that I forgot... Also I setup mysql apparmor so it can rw on this directory, and rebooted afterward: /usr/sbin/mysqld { ................. /ssd_drive/mysql/* rw, ................. }

    Read the article

  • Network problems with Ubuntu on VMware

    - by svick
    I'm running Ubuntu 10.04 inside VMware Player running under Windows Vista and I can't connect to the internet or the host computer from the Ubuntu. I have set all the VMware services to “manual” (like VMware DHCP Service), but starting them manually doesn't help. In VMware, the network seems to work (there is a green dot beside the network icon) and I have tried both Bridged and NAT settings. ifconfig doesn't show the eth1 interface, unless I give it as a parameter (or use -a). I think this means that Ubuntu thinks that the network isn't connected at all. How do I fix this? ifconvadmin@ubu1004:~$ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:56 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4192 (4.1 KB) TX bytes:4192 (4.1 KB) vadmin@ubu1004:~$ ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:0c:29:2d:a0:6f BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:18 Base address:0x2000

    Read the article

  • How to fix a bootable USB Kubuntu installation when the drive has maxed out?

    - by NoCatharsis
    I used Universal-USB-Installer-v1.5.1 from PenDriveLinux.com with Kubuntu 10.04 so I could set up my 4GB flash drive as a totally independent installation. Unfortunately, there was an OS upgrade available which Kubuntu downloaded and attempted to install. This, along with some other software, apparently maxed out my drive before I realized it. Now when I try to boot from the drive, everything boots as normal to the OS boot screen where I select "Boot from this Kubuntu USB Installation." The startup process initiates, then stalls about halfway through and hangs indefinitely. I'm guessing the drive is trying to use space it doesn't have and completely stops working. I realize that once the OS upgrade is in place, the old files could be deleted for a potential 700MB space gain. However, I just have no way to get into the OS and complete the upgrade. My main OS is Windows 7. Is there a way I can fix this issue from within Windows without formatting the entire drive and reinstalling Kubuntu from scratch?

    Read the article

  • What DBus signals do I send to players to imitate Gnome's multimedia shortcuts?

    - by culebrón
    I have Xubuntu 11.10, XFCE. I want to send DBus signals to the players so that they worked like in Gnome: you press 'play' key, it plays, 'next' - it forwards, and so on. For that, I need to bind to the multimedia keys a set of commands like this: dbus-send --dest=org.gnome.Rhythmbox ... Now, I searched and can't find it: what signals should I send? I need only 3 events: play, forward and rewind.

    Read the article

  • My control key doesn't work, how do I fix it??

    - by Blaine LaFreniere
    My control key on the right doesn't work how it should. E.g. Right ctrl + T won't open new tabs in firefox, right ctrl + w won't switch windows in vim, etc. I know the key isn't physically broken, because xev shows that the right ctrl key generates events, but it just isn't responding as I expect it to in applications. Screenshot: http://i46.tinypic.com/33w1h76.png I tried Kim's answer but it still doesn't work. blaine@blaine-laptop ~ $ xmodmap -pke | grep 105 keycode 105 = Control_R Control_R Control_R Control_R Control_R Tried to map as Control_L as well, didn't work. The computer is a laptop, I am unable to plug the keyboard in to another computer.

    Read the article

  • which drive do I mount

    - by Crash893
    I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

    Read the article

  • OSSEC is not running

    - by batman
    I have an two ec2 instances. In one I have installed ossec server and in other I have installed ossec agent. Here are my server config INBOUND (security group/firewall) : port:514 source:0.0.0.0/0 port:1514 source:0.0.0.0/0 But it seems to be not working. In my agent log file I keep on getting: 2012/08/28 06:52:52 ossec-agentd: INFO: Using IPv4 for: x.x.x.x.x.x . 2012/08/28 06:53:13 ossec-agentd(4101): WARN: Waiting for server reply (not started). Tried: 'x.x.x.x.x'. Edit: Running sudo netstat --inet -nlp | grep ossec. I'm getting: udp 0 0 0.0.0.0:1514 0.0.0.0:* 26027/ossec-remoted Where I'm making the mistake?

    Read the article

  • SSH session becomes unresponsive when logged into Ubuntu Server virtual machine using VirtualBox

    - by nickbart
    Hi everyone, I'm really at my wits end here, so I'm hoping someone here can help me. I have a virtual machine running Ubuntu Server 9.10. It's just a small development environment so I can keep my code separate from the test and production environments. I am running it through VirtualBox 3.1.6 on a laptop running Ubuntu Desktop 9.10. I have it set up with a bridged network connection and it is bridged to my laptop's wireless adapter. We have no wired connections in this office. I boot up the VM and everything is fine. I can SSH into it using gnome-terminal and for a while everything is Kosher. Then seemingly randomly, the SSH terminal session with hang. No error message, nothing; it just becomes unresponsive. If I go to the VirtualBox terminal I find the VM itself is perfectly fine. It can ping and I can SSH out with it. If I restart the networking on the VM the SSH session in my gnome-terminal will most of the time become responsive again. Here's an interesting point, the SSH session will sometimes die right in the middle of me typing something (this points to it not being an idle session issue) and if I go to the VirtualBox terminal and restart the networking and then return to my gnome-terminal SSH session I find that it will come back to life and what I typed when the session hung originally will magically type itself in to the buffer. So, my input is getting stored somewhere and just can't make its way to the VM until the networking on the VM is restarted. I've tried different versions of VirtualBox and used vmdk images and vdi images and nothing seems to work. I can't tell if the problem is with my laptop, VirtualBox, or the Ubuntu Server VDI. Is there anyway to debug this issue? Or has anyone out there seen anything similar? Your help is much appreciated. Nick

    Read the article

  • TFTP Timing Out on Ubuntu VM

    - by valsidalv
    I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

    Read the article

  • trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

    - by Registered User
    Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

    Read the article

  • Failing to load rootfs: Ubuntu 10 + grub2 + rootfs ext4 w/ RAID1

    - by James
    I am having problems booting a new Ubuntu 10 (server) install. My primary HD (/dev/sda) is laid out as follows: Device Boot Start End Blocks Id System /dev/sda1 * 1 18 144553+ 83 Linux <-- /BOOT /dev/sda2 19 182401 1464991447+ 5 Extended /dev/sda5 19 2207 17583111 fd Linux raid autodetect /dev/sda6 2208 11934 78132096 fd Linux raid autodetect <-- / (ROOTFS) /dev/sda7 11935 182401 1369276146 fd Linux raid autodetect The rootfs is part of a RAID1 (software) array (currently degraded): # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md2 : active raid1 sda6[1] 78132032 blocks [2/1] [_U] The UUIDs for the partitions are as follows: # blkid /dev/sda1 /dev/sda1: UUID="b25dd301-41b9-4f4d-9b0a-0e31713dd74c" TYPE="ext2" # blkid /dev/sda6 /dev/sda6: UUID="af7b9ede-fa53-c0c1-74be-31ec752c5cd5" TYPE="linux_raid_member" # blkid /dev/md2 /dev/md2: UUID="a0602d42-6855-482f-870c-6f6ecdcdae3f" TYPE="ext4" Finally, I have my grub2 menuentry setup as follows: ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-25-server' --class ubuntu --class gnu-linux --class gnu --class os { insmod ext2 insmod raid insmod mdraid set root='(hd0,1)' search --no-floppy --fs-uuid --set b25dd301-41b9-4f4d-9b0a-0e31713dd74c linux /vmlinuz-2.6.32-25-server root=UUID=a0602d42-6855-482f-870c-6f6ecdcdae3f ro nosplash noplymouth initrd /initrd.img-2.6.32-25-server } When I attempt to boot, grub loads OK, however I eventually get the following error message: Gave up waiting for root device. ALERT /dev/disk/by-uuid/a0602d42-6855-482f-870c-6f6ecdcdae3f does not exist. Dropping to a shell! If from the grub bootloader I open a grub command line, I can ls (hd0,) and it lists the correct partitions with the UUIDs as shown above - sda6 shows 'a0602d42-6855-482f-870c-6f6ecdcdae3f' (the RAID UUID). If I ls (md2)/ it properly lists all the files on the RAID1 filesystem (ext4) so it doesn't appear to be an issue accessing the raid device. Does anyone have any suggestions as to what the problem might be? I can't figure this one out.

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

    Read the article

  • 100% CPU load on Ubuntu 10.04.3 LTS 64bit

    - by deadtired
    I have 2 days since I am trying to fix this issue, with no success. The server is a mysql database server. Hardware: DELL Poweredge 1950, 2x Intel Xeon Quad Core E5345 @ 2.33GHz, 16 Gb mem, 2x 146Gb SAS (software RAID1) Software: Ubuntu 10.04.3 LTS, MySQL 5.1.41 Issue: while mysql is not used and runs with no database, everything seems alright. As soon as I install a database, it has the reason to bring all 8 cores in 100% with low memory consumption. So, you can imagine the load average goes high (I saw 212 load average for the first time). The server doesn't become unresponsive, but you can see it's slow while browsing the project installed. Additional info: the database used is not more than 24MB and it was moved from a server with less resources and a lot more larger databases. So it's not the database/project. my.cnf is not a reason also, as I used both default one and the one I use on the same distribution on another server.What is interesting is that mysql doesn't close any process and runs to the limit of the max_connections. Logs are quiet. Nothing there. I switched to this Ubuntu version after I suspected some problems in the newly Ubuntu 11.10 server. This one worked alright for an hour after I made a kernel upgrade to 3.0.1 (it was using the memory also) I tested disk speed and seems alright. Some more output on the running server: dstat -cndymlp -N total -D total 3: htop command: Idea? Did anyone meet the same problem? Any fix you can think of?

    Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >