Search Results

Search found 3205 results on 129 pages for 'unexpected shutdown'.

Page 63/129 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• My Windows 8 computer does not come out of Standby

  - by Jikag

  My computer will not come out out of standby. It has had this issue ever since I bought it ~4 years ago. When I purchased it, It came with Vista, I have since upgraded it to 7 and now 8 Pro, each time hoping that it would fix the problem, each time finding that it did not. My computer is an HP Pavilion Model #: m9500y. The computer goes into standby, but does not come out of it properly. If Hybrid sleep in on, it does not respond at all. If Hybrid sleep is off, It comes out and I can see the desktop for a bit, but then the screen goes black again and I have to reboot. I have tried Running a sfc, and a chkdsk in case it's a corrupted file, but it hasn't helped. This isn't too serious an issue because I can just shutdown my computer and turn it on the old fashioned way, but it is annoying and I would appreciate some advice going forward as I'm currently stumped.

  Read the article

• How to test if SYN and FIN are both dropped at the same time in hping3?

  - by snow

  One of the rules to prevent unexpected attack is to prevent SYN & FIN being used together. SYN and FIN are both set $IPT -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP How do I use hping to test if this iptable rule works? hping3 192.168.7.0 --keep -S -F??? Is this complete? When just type iptables -L, it shows: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere DROP tcp -- anywhere anywhere tcp flags:FIN,SYN/FIN,SYN WHY do I need to put the "SYN,FIN" twice before drop? Is it because one for source and one for destination?

  Read the article

• How to proceed setting up a secondary mysql linux slave?

  - by Algorist

  I have a mysql database master and slave in production. I want to setup additional mysql slave. There is around 15 Terabyte of data in the database and there are MYISAM and InnoDB tables in the database. I am thinking of below options: Shutdown master database and copy the mysql data folder to secondary slave. Can Innodb tables be copied like this? Run flush table with read lock, scp the file to new slave and unlock the table and this is possible for myisam tables, can I do the same for innodb tables too? Thanks for looking at the question.

  Read the article

• Mapping drives on MacOSX (Leopard/Snow Leopard) permanently inside LAN

  - by Shyam

  Hi, How do I "map" shared folders on a Mac, permanently? With map, I do not mean 'connect', but permanently add it to the system so it exists after reboot. Since workstations tend to shutdown, I wonder also the symptoms and cures in case that happens. In Linux, this can be done using the fstab file, but I noticed that volumes are mounted in a different structure than Linux. I need this to backup some workstations, doing a recursive job over a single directory, that should contain the shared folders. I use Terminal to access the main system, so by preference, the solution would be nice that works within a bash shell vs GUI. I can access all folders in Finder. Thanks!

  Read the article

• Is it possible to interrupt or cancel the trash-delete process?

  - by pete

  I am connected to the company server, onsite not remote, which is Windows based. When, in the OS finder, I go to delete a file or directory that resides on the window-based server, the trash progress panel appears as usual. Not infrequently it will just hang there appearing to be active but no progress occurs on the progress bar. So the X is chosen to stop or cancel the process. A new panel appears, and while appearing to be active, again, just hangs there indefinitely. My lack of reputation prevents posting a screen shot - sorry. The question then is this: Is there a way via the Activity Monitor, Terminal, etc. to interrupt this deleting process in the Mac OS? Currently, I have to force shutdown and reboot to eradicate the ever-deleting panel. Finder relaunch does not solve and only eliminates the finder until I force reboot. Any assistance is appreciated. Thanks, Pete iMac, Mac OS X (10.6.8), i7-2.8ghz, 8gb ram

  Read the article

• Can I send some text to the STDIN of an active process running in a screen session?

  - by Richard Gaywood

  I have a long-running server process inside a screen session on my Linux server. It's a bit unstable (and sadly not my software so I can't fix that!), so I want to script a nightly restart of the process to help stability. The only way to make it do a graceful shutdown is to go to the screen process, switch to the window it's running in, and enter the string "stop" on its control console. Are there any smart redirection contortions I can do to make a cronjob send that stop command at a fixed time every day?

  Read the article

• Why my widows 8 pc always powered on by moving mouse?

  - by Shinbo

  I recently installed windows 8 RTM, but found a very annoying thing. My PC always powered on automatically even in midnight. Eventually I noticed that I can power on the PC by pressing keyboard or mouse, and even moving mouse. After searched this in google, I turned off Sleep and Hibernate in Power Options - System Settings - Shutdown settings, but it still did not work. Would anyone please help me? I don't want to suffer from the noise of PC powering on in midnight any more. Thank a lot.

  Read the article

• Agent admitted failure to sign using the key.

  - by Delirium tremens

  .ssh dir is chmodded 700, id_rsa.pub 600, id_rsa 400. I ran ssh-keygen -t rsa, imported key to launchpad and ran bzr branch lp:unity, but got error message: Agent admitted failure to sign using the key. Permission denied (publickey). bzr: ERROR: Connection closed: Unexpected end of message. Please check connectivity and permissions, and report a bug if problems persist. auth.log: Nov 28 20:23:13 ubuntu sudo: deltrem : TTY=pts/0 ; PWD=/home/deltrem/Documentos/repositories ; USER=root ; COMMAND=/usr/bin/bzr branch lp:unity Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session opened for user root by (uid=0) Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session closed for user root Nov 28 20:41:04 ubuntu gnome-screensaver-dialog: gkr-pam: unlocked login keyring

  Read the article

• dev_install failed on ARM chromebook

  - by user1027721

  I'm trying this guide for having access to emerge on chromeos. http://www.chromium.org/chromium-os/how-tos-and-troubleshooting/install-software-on-base-images Unfortunately I always got the same error which is $ sudo dev_install Starting installation of developer packages. First, we download the necessary files. Downloading https://commondatastorage.googleapis.com/chromeos-dev-installer/board/daisy/full-3.168.0.0/packages/app-misc/mime-types-8.tbz2 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 127 100 127 0 0 252 0 --:--:-- --:--:-- --:--:-- 305 [: 184: -ne: unexpected operator Extracting /usr/local/portage/packages/app-misc/mime-types-8.tbz2 I think that it somehow returns a 404 everytime. Thanks for your help

  Read the article

• Installing TKInter for Python 2.6.5

  - by Azfar

  Well today's been a bit of shock. After running port -v selfupdate followed by an attempt to run sudo port install py26-ipython MacPorts went around installing a whole host of stuff, including updating my Python from 2.6.4 to 2.6.5. It's nice but unexpected in a creepy way. So I tried to install TKInter using MacPorts with port search tkinter yielding: py-tkinter @2.4.6 (python, graphics) Python bindings to the Tk widget set py25-tkinter @2.5.4 (python, graphics) This is a stub. tkinter is now built with python25 Found 2 ports. So I tried sudo port install py25-tkinter and then it tries to install Python 2.5.5. There must be an easier way to install TkInter without being faffed around... help please?

  Read the article

• 403 in Response to OPTIONS when updating working copy having full access

  - by user23419

  There is an SVN repository (single repository) http://example.net/svn The repository contains several projects (directories): http://example.net/svn/Project1 http://example.net/svn/Project2 User has full access to Project1 directory and has no access neither to root nor to Project2. Everything works fine for a while: user checks out http://example.net/svn/Project1, commits and updates it successfully. But sometimes trying to update leads to the following error: Command: Update Error: Server sent unexpected return value (403 Forbidden) in response to OPTIONS Error: request for 'http://example.net/svn' Finished! Why does TortoiseSVN request something in the root??? I have noticed that this happens after somebody else committed copy or move operation. Checking out http://example.net/svn/Project1 helps till next time... The main question: How to set up access rights for user to avoid these errors? Note, it's not an option to grant user any read or write access right on the root directory for security reasons.

  Read the article

• Firewall blocks FTP PASV response

  - by harper

  0 down vote favorite I have an FTP server that supports passive server mode (using PASV command). This works fine with Windows XP. When I want to access this server from Windows Vista or Windows 7 with firewall enabled I experience a immediate connection shutdown. A reset packet is sent to the server, the socket is signaled that the server had reset the connection (what is not true). The problem disappears when the firewall is disabled. Connections to other FTP servers work correctly. The difference is that the servers response to PASV does not enclose the address field with parentheses. This is legal as documented in RFC-959 and RFC-1132. How can I configure the firewall to stop this bad behavior?

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Server Problems

  - by nardone25

  Hello everyone in serverfault. I am having a big issue right now and I hope you guys can help. Well I got a call at 7:15am today stating that person can't log in. Then my cell phone start to ring like crazy. So when I got in the server room my ac wasn't working. It was 100 dgrees Luckly I have two UPS that will shutdown my lefthands and servers when it get 95. I am running two left-hand sans, I have two servers machines running VMware ESX. Here is my problem, I booted the server back up when the room was at 68 and only administrator and two IT techs can log on to any desktop. I do get an permissions error from who every logs on. What should I do?

  Read the article

• Which Message Queue should I choose (must run on Linux)

  - by MHS

  There are many open source Message queues for Linux, and I need some help deciding what I should go for. My problem is simple - I get sent a list of files that needs to be processed. Each job can't be split up, but they are self contained and can be spread to multiple computers. I'm thinking of solving this using a message queue. Multiple clients send a message to a central queue. Each queue has a number of subscribers that will take jobs from that queue when they have finished processing the current job. Ideally it should have the following qualities Message queue must be able to store unprocessed messages in case of a shutdown/reboot A job can only be processed by a single subscriber (don't want duplicate jobs) The subscribers should be able to send jobs of their own, that will be processed by a different set of subscribers. Can anyone suggest a simple to use message queue?

  Read the article

• mini linux for browsing media playing

  - by Martin Beckett

  I'm looking for a small linux install (<100Mb) that can just run a browser and ideally a media player. It's to fit in a spare recovery partition on my laptop and be a quick boot for non-work stuff when I'm on the road. I have used Puppy-linux and DSL before but they have lots of stuff I don't need. Is there something like these that just concentrates on running a browser in the way xbmc does for videos? ps. The size requirement was to fit in the existing 100Mb win7 recovery partition, but that can be resized. The main idea was something that booted very quickly without the 10min wait while windows does all the corporate stuff and realizes it isn't on the LAN - and could be shutdown instantly.

  Read the article

• Keyboard lights sometimes stay on after PC is powered off. Why?

  - by Vilx-

  Sometimes when I power off my PC some lights on the keyboard stay on. It's pretty random which ones, though I suspect it has something to do with what lights were on just before the shutdown (if I vigorously follow that they are all off while the PC is shutting down then they stay off). Not that this would change anything, but it is annoying. Why does this happen and how can I avoid it? Added: I know that I can turn off the power completely to my computer and it will go off. That's not the point. Actually, I even want my keyboard to have power, because I use it to turn on my computer (the power button on the case is difficult to reach). I just want the lights to go off. Or at least understand why this happens. Oh, and it's a PS2 keyboard.

  Read the article

• Trouble editing ~/.bash_profile: -bash: $'\r': command not found

  - by Dave

  I installed CygWin on Windows 7. Using Notepad, I edited my ~/.bash_profile file to add on to the PATH variable … PATH="${PATH}:/cygdrive/c/apache-ant-1.8.2/bin" Now, when I SSH in to my Windows machine, I get this error … -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: /home/dev/.bash_profile: line 39: syntax error: unexpected end of file and my PATH is not set. Anyone know how I can correct this?

  Read the article

• Cannot access files after trying to upgrade Ubuntu

  - by Ola

  I tried to upgrade Ubuntu from 11.10 to 12.04. I left it for 24 hours but the upgrade did not complete. Hence I cancelled the upgrade. I thought I will copy all the files that I have to a DVD/CD and try try downloading a copy of Ubuntu. But now, I cannot open any file or copy them. I cannot even shutdown my laptop. I have many important files on my laptop. Can someone help me retrieve my files from my laptop? Regards Ola

  Read the article

• xorg DPMS off: keep VT from turning screen back on

  - by Metiu

  I have an embedded board with a small UPS. When AC power goes down, I need to turn off all power hungry devices in order to have a clean shutdown. First thing I do, is set DPMS to force powerdown, then go through the usual SIGTERM/SIGKILL/umount sequence. I have an Intel i915 Display adapter connected to an LVDS LCD panel. Unfortunately, when Xorg dies, Xserver or the VT code turn the LCD panel back on. I even tried working around it by directly poking the panel enable register in the Display chip, so that X doesn't know about it, but the panel goes back on when the VT comes back. Is there any "legal" way of keeping the display off? Thank you

  Read the article

• Installing Sql Server 2005 SP2 - Getting error on analysis services component

  - by Greg_the_Ant

  At first many of the components didn't install and I followed this workaround (fixing user/SID mappings in registry.) After that everything installed successfully except for analysis services. I am getting the exact same error message as before on analysis services. (Are there other users installed by sql server I'm not aware of perhaps?) Do you guys have any ideas? All of my searches seem to just point to that workaround above that I already did. Error message from log: Product : Analysis Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\OLAP9_Hotfix_KB921896_sqlrun_as.msp.log Error Number : 29528 Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.

  Read the article

• Mantaining Wordpress website with subversion

  - by Geries

  I want to setup a website using wordpress, which we can modified locally and then via subversion commit the site and make it public. This means to installing new plugins, changing the content, testing updates of wordpress to see if they work with the theme, etc. The idea is to control the development on the site, in case we need to keep track of the dev or roll back, because of unexpected bugs in a the plugins, theme, etc. I've read this article in codex, however I'm not sure how this is done when, we want to include the content and changes on the options of worpdress and plugins (which is in the mysql). Thanks

  Read the article

• Subversion error: (405 Method Not Allowed) in response to MKCOL

  - by Sergio del Amo

  I am getting the next error while trying to commit a new directory addition. svn: Commit failed (details follow): svn: Server sent unexpected return value (405 Method Not Allowed) in response to MKCOL request for '.... I have never seen this error before. Can someone help me? Solution I managed to solve the problem: Delete the parent's directory of the folder giving the problem. Did SVN Update A folder with the same name as the new one already existed in repository. Delete this folder SVN Commit Copy the new folder, Schedule for addition and SVN Commit

  Read the article

• Accessing my Rails webrick behind proxy?

  - by Eki Eqbal

  In my mackbook, when I try to connect to my rails application in office I can't , in the office there are some http proxy , and when I run my rails like this : sudo rails s -p8080 => Booting WEBrick => Rails 3.0.5 application starting in development on http://0.0.0.0:8080 => Call with -d to detach => Ctrl-C to shutdown server [2012-03-20 12:49:34] INFO WEBrick 1.3.1 [2012-03-20 12:49:34] INFO ruby 1.8.7 (2010-01-10) [universal-darwin11.0] [2012-03-20 12:49:34] INFO WEBrick::HTTPServer#start: pid=17439 port=8080 The local IP is : en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether f8:1e:df:d8:8c:25 inet6 fe80::fa1e:dfff:fed8:8c25%en1 prefixlen 64 scopeid 0x5 inet 10.21.21.240 netmask 0xffffff00 broadcast 10.21.21.255 media: autoselect status: active so when I try in the browser to trigger localhost:8080 or 10.21.21.240:8080 , it seems that I can't trigger my application as for the proxy check out the following : Any Ideas ?

  Read the article

• How to make PuTTY X11 forwarding work in a screen session?

  - by Alex Howell

  I'm using PuTTY with X11 forwarding enabled, using Xming as my X server on Windows 7. When I SSH to a Linux host, X11 forwarding works fine. If I start a "screen" screen manager session, it still works fine. If I disconnect from the screen session, then later resume in a different PuTTY window using "screen -rd", X11 forwarding doesn't work any more - I get an error: xterm X connection to localhost:11.0 broken (explicit kill or server shutdown). This seems to be because $DISPLAY is different in each PuTTY SSH session (localhost:11.0 in the first session, then localhost:12.0 in the next, and so on). If I manually set $DISPLAY to localhost:12.0 in the screen session, X11 forwarding works again. Is there a way to automatically set $DISPLAY in the screen session, each time it's resumed, so that it always matches the parent PuTTY session's?

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >