Search Results

Search found 17621 results on 705 pages for 'just my correct opinion'.

Page 632/705 | < Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >

  • Share a Printer on Your Network from Vista or XP to Windows 7

    - by Mysticgeek
    The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Share a Printer on Your Network from Vista or XP to Windows 7

    - by Mysticgeek
    The other day we looked at sharing a printer between Windows 7 machines, but you may only have one Windows 7 machine and the printer is connected to a Vista or XP computer. Today we show you how to share a printer from either Vista or XP to Windows 7. We previously showed you how to share files and printers between Windows 7 and XP. But what if you have a printer connected to an XP or Vista machine in another room, and you want to print to it from Windows 7? This guide will walk you through the process. Note: In these examples we’re using 32-bit versions of Windows 7, Vista, and XP on a basic home network. We are using an HP PSC 1500 printer, but keep in mind every printer is different so finding and installing the correct drivers will vary. Share a Printer from Vista To share the printer on a Vista machine click on Start and enter printers into the search box and hit Enter. Right-click on the printer you want to share and select Sharing from the context menu. Now in Printer Properties, select the Sharing tab, mark the box next to Share this printer, and give the printer a name. Make sure the name is something simple with no spaces then click Ok. Share a Printer from XP To share a printer from XP click on Start then select Printers and Faxes. In the Printers and Faxes window right-click on the printer to share and select Sharing. In the Printer Properties window select the Sharing tab and the radio button next to Share this printer and give it a short name with no spaces then click Ok. Add Printer to Windows 7 Now that we have the printer on Vista or XP set up to be shared, it’s time to add it to Windows 7. Open the Start Menu and click on Devices and Printers. In Devices and Printers click on Add a printer. Next click on Add a network, wireless or Bluetooth printer. Windows 7 will search for the printer on your network and once its been found click Next. The printer has been successfully added…click Next. Now you can set it as the default printer and send a test page to verify everything works. If everything is successful, close out of the add printer screens and you should be good to go.   Alternate Method If the method above doesn’t work, you’ll can try the following for either XP or Vista. In our example, when trying to add the printer connected to our XP machine, it wasn’t recognized automatically. If you’re search pulls up nothing then click on The printer that I want isn’t listed. In the Add Printer window under Find a printer by name or TCP/IP address click the radio button next to Select a shared printer by name. You can either type in the path to the printer or click on Browse to find it. In this instance we decided to browse to it and notice we have 5 computers found on the network. We want to be able to print to the XPMCE computer so we double-click on that. Type in the username and password for that computer… Now we see the printer and can select it. The path to the printer is put into the Select a shared printer by name field. Wait while Windows connects to the printer and installs it… It’s successfully added…click Next. Now you can set it as the default printer or not and print a test page to make sure everything works successfully. Now when we go back to Devices and Printers under Printers and Faxes, we see the HP printer on XPMCE. Conclusion Sharing a printer from one machine to another can sometimes be tricky, but the method we used here in our setup worked well. Since the printer we used is fairly new, there wasn’t a problem with locating any drivers for it. Windows 7 includes a lot of device drivers already so you may be surprised on what it’s able to install. Your results may vary depending on your type of printer, Windows version, and network setup. This should get you started configuring the machines on your network—hopefully with good results.  If you you have two Windows 7 computers, then sharing a printer or files is easy through the Homegroup feature. You can also share a printer between Windows 7 machines on the same network but not Homegroup. Similar Articles Productive Geek Tips Share a Printer Between Windows 7 Machines Not in the Same HomegroupShare Files and Printers between Windows 7 and XPHow To Share Files and Printers Between Windows 7 and VistaEnable Mapping to \HostnameC$ Share on Windows 7 or VistaUse the Homegroup Feature in Windows 7 to Share Printers and Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

    Read the article

  • Where is my app.config for SSIS?

    Sometimes when working with SSIS you need to add or change settings in the .NET application configuration file, which can be a bit confusing when you are building a SSIS package not an application. First of all lets review a couple of examples where you may need to do this. You are using referencing an assembly in a Script Task that uses Enterprise Library (aka EntLib), so you need to add the relevant configuration sections and settings, perhaps for the logging application block. You are using using Enterprise Library in a custom task or component, and again you need to add the relevant configuration sections and settings. You are using a web service with Microsoft Web Services Enhancements (WSE) 3.0 and hosting the proxy in SSIS, in an assembly used by your package, and need to add the configuration sections and settings. You need to change behaviours of the .NET framework which can be influenced by a configuration file, such as the System.Net.Mail default SMTP settings. Perhaps you wish to configure System.Net and the httpWebRequest header for parsing unsafe header (useUnsafeHeaderParsing), which will change the way the HTTP Connection manager behaves. You are consuming a WCF service and wish to specify the endpoint in configuration. There are no doubt plenty more examples but each of these requires us to identify the correct configuration file and and make the relevant changes. There are actually several configuration files, each used by a different execution host depending on how you are working with the SSIS package. The folders we need to look in will actually vary depending on the version of SQL Server as well as the processor architecture, but most are all what we can call the Binn folder. The SQL Server 2005 Binn folder is at C:\Program Files\Microsoft SQL Server\90\DTS\Binn\, compared to C:\Program Files\Microsoft SQL Server\100\DTS\Binn\ for SQL Server 2008. If you are on a 64-bit machine then you will see C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\ for the 32-bit executables and C:\Program Files\Microsoft SQL Server\90\DTS\Binn\ for 64-bit, so be sure to check all relevant locations. Of course SQL Server 2008 may have a C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\ on a 64-bit machine too. To recap, the version of SQL Server determines if you look in the 90 or 100 sub-folder under SQL Server in Program Files (C:\Program Files\Microsoft SQL Server\nn\) . If you are running a 64-bit operating system then you will have two instances program files, C:\Program Files (x86)\ for 32-bit and  C:\Program Files\ for 64-bit. You may wish to check both depending on what you are doing, but this is covered more under each section below. There are a total of five specific configuration files that you may need to change, each one is detailed below: DTExec.exe.config DTExec.exe is the standalone command line tool used for executing SSIS packages, and therefore it is an execution host with an app.config file. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DTExec.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. DtsDebugHost.exe.config DtsDebugHost.exe is the execution host used by Business Intelligence Development Studio (BIDS) / Visual Studio when executing a package from the designer in debug mode, which is the default behaviour. e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\DtsDebugHost.exe.config The file can be found in both the 32-bit and 64-bit Binn folders. This may surprise some people as Visual Studio is only 32-bit, but thankfully the debugger supports both. This can be set in the project properties, see the Run64BitRuntime property (true or false) in the Debugging pane of the Project Properties. dtshost.exe.config dtshost.exe is the execution host used by what I think of as the built-in features of SQL Server such as SQL Server Agent e.g. C:\Program Files\Microsoft SQL Server\90\DTS\Binn\dtshost.exe.config This file can be found in both the 32-bit and 64-bit Binn folders devenv.exe.config Something slightly different is devenv.exe which is Visual Studio. This configuration file may also need changing if you need a feature at design-time such as in a Task Editor or Connection Manager editor. Visual Studio 2005 for SQL Server 2005  - C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\devenv.exe.config Visual Studio 2008 for SQL Server 2008  - C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe.config Visual Studio is only available for 32-bit so on a 64-bit machine you will have to look in C:\Program Files (x86)\ only. DTExecUI.exe.config The DTExec UI tool can also have a configuration file and these cab be found under the Tools folders for SQL Sever as shown below. C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\DTExecUI.exe A configuration file may not exist, but if you can find the matching executable you know you are in the right place so can go ahead and add a new file yourself. In summary we have covered the assembly configuration files for all of the standard methods of building and running a SSIS package, but obviously if you are working programmatically you will need to make the relevant modifications to your program’s app.config as well.

    Read the article

  • MySQL 5.5 - Lost connection to MySQL server during query

    - by bully
    I have an Ubuntu 12.04 LTS server running at a german hoster (virtualized system). # uname -a Linux ... 3.2.0-27-generic #43-Ubuntu SMP Fri Jul 6 14:25:57 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I want to migrate a Web CMS system, called Contao. It's not my first migration, but my first migration having connection issues with mysql. Migration went successfully, I have the same Contao version running (it's more or less just copy / paste). For the database behind, I did: apt-get install mysql-server phpmyadmin I set a root password and added a user for the CMS which has enough rights on its own database (and only its database) for doing the stuff it has to do. Data import via phpmyadmin worked just fine. I can access the backend of the CMS (which needs to deal with the database already). If I try to access the frontend now, I get the following error: Fatal error: Uncaught exception Exception with message Query error: Lost connection to MySQL server during query (<query statement here, nothing special, just a select>) thrown in /var/www/system/libraries/Database.php on line 686 (Keep in mind: I can access mysql with phpmyadmin and through the backend, working like a charme, it's just the frontend call causing errors). If I spam F5 in my browser I can sometimes even kill the mysql deamon. If I run # mysqld --log-warnings=2 I get this: ... 120921 7:57:31 [Note] mysqld: ready for connections. Version: '5.5.24-0ubuntu0.12.04.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 05:57:37 UTC - mysqld got signal 4 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346679 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f1485db3b20 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f1480041e60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f1483b96459] mysqld(handle_fatal_signal+0x483)[0x7f1483a5c1d3] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f1482797cb0] /lib/x86_64-linux-gnu/libm.so.6(+0x42e11)[0x7f14821cae11] mysqld(_ZN10SQL_SELECT17test_quick_selectEP3THD6BitmapILj64EEyyb+0x1368)[0x7f1483b26cb8] mysqld(+0x33116a)[0x7f148397916a] mysqld(_ZN4JOIN8optimizeEv+0x558)[0x7f148397d3e8] mysqld(_Z12mysql_selectP3THDPPP4ItemP10TABLE_LISTjR4ListIS1_ES2_jP8st_orderSB_S2_SB_yP13select_resultP18st_select_lex_unitP13st_select_lex+0xdd)[0x7f148397fd7d] mysqld(_Z13handle_selectP3THDP3LEXP13select_resultm+0x17c)[0x7f1483985d2c] mysqld(+0x2f4524)[0x7f148393c524] mysqld(_Z21mysql_execute_commandP3THD+0x293e)[0x7f14839451de] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f1483948bef] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1365)[0x7f148394a025] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f14839ec7cd] mysqld(handle_one_connection+0x50)[0x7f14839ec830] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f148278fe9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f1481eba4bd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f1464004b60): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED From /var/log/syslog: Sep 21 07:17:01 s16477249 CRON[23855]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Sep 21 07:18:51 s16477249 kernel: [231923.349159] type=1400 audit(1348204731.333:70): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=23946 comm="apparmor_parser" Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23990]: Upgrading MySQL tables if necessary. Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: Looking for 'mysql' as: /usr/bin/mysql Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[23993]: This installation of MySQL is already upgraded to 5.5.24, use --force if you still need to run mysql_upgrade Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[24004]: Checking for insecure root accounts. Sep 21 07:18:53 s16477249 /etc/mysql/debian-start[24009]: Triggering myisam-recover for all MyISAM tables I'm using MyISAM tables all over, nothing with InnoDB there. Starting / stopping mysql is done via sudo service mysql start sudo service mysql stop After using google a little bit, I experimented a little bit with timeouts, correct socket path in the /etc/mysql/my.cnf file, but nothing helped. There are some old (from 2008) Gentoo bugs, where re-compiling just solved the problem. I already re-installed mysql via: sudo apt-get remove mysql-server mysql-common sudo apt-get autoremove sudo apt-get install mysql-server without any results. This is the first time I'm running into this problem, and I'm not very experienced with this kind of mysql 'administration'. So mainly, I want to know if anyone of you could help me out please :) Is it a mysql bug? Is something broken in the Ubuntu repositories? Is this one of those misterious 'use-tcp-connection-instead-of-socket-stuff-because-there-are-problems-on-virtualized-machines-with-sockets'-problem? Or am I completly on the wrong way and I just miss-configured something? Remember, phpmyadmin and access to the backend (which uses the database, too) is just fine. Maybe something with Apache? What can I do? Any help is appreciated, so thanks in advance :)

    Read the article

  • MVC 2 Editor Template for Radio Buttons

    - by Steve Michelotti
    A while back I blogged about how to create an HTML Helper to produce a radio button list.  In that post, my HTML helper was “wrapping” the FluentHtml library from MvcContrib to produce the following html output (given an IEnumerable list containing the items “Foo” and “Bar”): 1: <div> 2: <input id="Name_Foo" name="Name" type="radio" value="Foo" /><label for="Name_Foo" id="Name_Foo_Label">Foo</label> 3: <input id="Name_Bar" name="Name" type="radio" value="Bar" /><label for="Name_Bar" id="Name_Bar_Label">Bar</label> 4: </div> With the release of MVC 2, we now have editor templates we can use that rely on metadata to allow us to customize our views appropriately.  For example, for the radio buttons above, we want the “id” attribute to be differentiated and unique and we want the “name” attribute to be the same across radio buttons so the buttons will be grouped together and so model binding will work appropriately. We also want the “for” attribute in the <label> element being set to correctly point to the id of the corresponding radio button.  The default behavior of the RadioButtonFor() method that comes OOTB with MVC produces the same value for the “id” and “name” attributes so this isn’t exactly what I want out the the box if I’m trying to produce the HTML mark up above. If we use an EditorTemplate, the first gotcha that we run into is that, by default, the templates just work on your view model’s property. But in this case, we *also* was the list of items to populate all the radio buttons. It turns out that the EditorFor() methods do give you a way to pass in additional data. There is an overload of the EditorFor() method where the last parameter allows you to pass an anonymous object for “extra” data that you can use in your view – it gets put on the view data dictionary: 1: <%: Html.EditorFor(m => m.Name, "RadioButtonList", new { selectList = new SelectList(new[] { "Foo", "Bar" }) })%> Now we can create a file called RadioButtonList.ascx that looks like this: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> 2: <% 3: var list = this.ViewData["selectList"] as SelectList; 4: %> 5: <div> 6: <% foreach (var item in list) { 7: var radioId = ViewData.TemplateInfo.GetFullHtmlFieldId(item.Value); 8: var checkedAttr = item.Selected ? "checked=\"checked\"" : string.Empty; 9: %> 10: <input type="radio" id="<%: radioId %>" name="<%: ViewData.TemplateInfo.HtmlFieldPrefix %>" value="<%: item.Value %>" <%: checkedAttr %>/> 11: <label for="<%: radioId %>"><%: item.Text %></label> 12: <% } %> 13: </div> There are several things to note about the code above. First, you can see in line #3, it’s getting the SelectList out of the view data dictionary. Then on line #7 it uses the GetFullHtmlFieldId() method from the TemplateInfo class to ensure we get unique IDs. We pass the Value to this method so that it will produce IDs like “Name_Foo” and “Name_Bar” rather than just “Name” which is our property name. However, for the “name” attribute (on line #10) we can just use the normal HtmlFieldPrefix property so that we ensure all radio buttons have the same name which corresponds to the view model’s property name. We also get to leverage the fact the a SelectListItem has a Boolean Selected property so we can set the checkedAttr variable on line #8 and use it on line #10. Finally, it’s trivial to set the correct “for” attribute for the <label> on line #11 since we already produced that value. Because the TemplateInfo class provides all the metadata for our view, we’re able to produce this view that is widely re-usable across our application. In fact, we can create a couple HTML helpers to better encapsulate this call and make it more user friendly: 1: public static MvcHtmlString RadioButtonList<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, params string[] items) 2: { 3: return htmlHelper.RadioButtonList(expression, new SelectList(items)); 4: } 5:   6: public static MvcHtmlString RadioButtonList<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, IEnumerable<SelectListItem> items) 7: { 8: var func = expression.Compile(); 9: var result = func(htmlHelper.ViewData.Model); 10: var list = new SelectList(items, "Value", "Text", result); 11: return htmlHelper.EditorFor(expression, "RadioButtonList", new { selectList = list }); 12: } This allows us to simply the call like this: 1: <%: Html.RadioButtonList(m => m.Name, "Foo", "Bar" ) %> In that example, the values for the radio button are hard-coded and being passed in directly. But if you had a view model that contained a property for the collection of items you could call the second overload like this: 1: <%: Html.RadioButtonList(m => m.Name, Model.FooBarList ) %> The Editor templates introduced in MVC 2 definitely allow for much more flexible views/editors than previously available. By knowing about the features you have available to you with the TemplateInfo class, you can take these concepts and customize your editors with extreme flexibility and re-usability.

    Read the article

  • Setup Remote Access in Windows Home Server

    - by Mysticgeek
    One of the many awesome features of Windows Home Server, is the ability to access your server and other computers on your network remotely. Today we show you the steps to enable Remote Access to your home server from anywhere you have an Internet connection. Remote Access in Windows Home Server has a lot of great features like uploading and downloading files from shared folders, accessing files from machines on your network, and controling machines remotely (on supported OS versions). Here we take a look at the basics of setting it up, choosing a domain name, and verifying you can connect remotely. Setup Remote Access in Windows Home Server Open the Windows Home Server Console and click on Settings. Next select Remote Access, it is off by default, just click the button to turn it on. Wait while your router is configured for remote access, when it’s complete click Next. Notice that it will enable UPnP, if you don’t wish to have that enabled, you can manually forward the correct ports. If you have any problems with the router being automatically configured, we’ll be taking a look at a more detailed troubleshooting guide in the future. The router is successfully configured, and we can continue to the next process of configuring our domain name. The Domain Name Setup Wizard will start. Notice you will need a Windows Live ID to set it up –which is typically your hotmail address. If you don’t already have one, you can get one here. Type in your Live ID email address and password and click Next… Agree to the Home Server Privacy Statement and the Live Custom Domains Addendum. If you’re concerned about privacy and want to learn more about the domain addendum, make sure to read about it before agreeing. There is nothing abnormal to point out about either statement, but if this is your first time setting it up, it’s good to review the information.   Now choose a name for the domain. You should select something that is easy to remember and identifies your home server. The name can contain up to 63 characters, numbers, letters, and hyphens…and must begin and end with a letter or number. When you have the name figured out click the Confirm button. Note: You can only register one domain name per Live ID. If the name isn’t already taken, you’ll get a confirmation message indicating it’s god to go. The wizard is complete and you can now access the home server from the URL provided. A few other things to point out after you’ve set it up…under Domain Name click on the Details button… Which pulls up the domain detail information and you can refresh the data to verify everything is working correctly. Or you can click the Configure button and then change or release your current domain name. Under Web site settings, you can change you site page headline to whatever you want it to be. Accessing Home Server Remotely After you’ve gotten everything setup for your home server domain, you can begin to access it when you’re away from home. Simply type in the domain address you created in the previous steps. The start page is rather boring…and to start accessing your data, click the Log On button in the upper right hand corner. Then enter in your home server credentials to gain access to your files, folders, and network computers. You won’t be able to log in with your administrator user account however, to protect security of your network. Once you’re logged in, you’ll be able to access different parts of your home server shares and network computers. Conclusion Now that you have Remote Access setup, you should be able to access and manage your files easily. Being able to access data from your home server remotely is great when you need to get certain files while on the road. The web UI is pretty self explanatory, works best in IE as ActiveX is required, and is smooth and easy to work with. In future articles we’ll be covering a lot more regarding remote access, including more of the available features, troubleshooting connection issues, and enabling access for other users. Similar Articles Productive Geek Tips GMedia Blog: Setting Up a Windows Home ServerHow to Remote Desktop to the Actual Server Console on Windows 2003Use Windows Vista Aero through Remote Desktop ConnectionAccess Your MySQL Server Remotely Over SSHShare Ubuntu Home Directories using Samba TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC Live Map of Marine Traffic NoSquint Remembers Site Specific Zoom Levels (Firefox)

    Read the article

  • Parallelism in .NET – Part 1, Decomposition

    - by Reed
    The first step in designing any parallelized system is Decomposition.  Decomposition is nothing more than taking a problem space and breaking it into discrete parts.  When we want to work in parallel, we need to have at least two separate things that we are trying to run.  We do this by taking our problem and decomposing it into parts. There are two common abstractions that are useful when discussing parallel decomposition: Data Decomposition and Task Decomposition.  These two abstractions allow us to think about our problem in a way that helps leads us to correct decision making in terms of the algorithms we’ll use to parallelize our routine. To start, I will make a couple of minor points. I’d like to stress that Decomposition has nothing to do with specific algorithms or techniques.  It’s about how you approach and think about the problem, not how you solve the problem using a specific tool, technique, or library.  Decomposing the problem is about constructing the appropriate mental model: once this is done, you can choose the appropriate design and tools, which is a subject for future posts. Decomposition, being unrelated to tools or specific techniques, is not specific to .NET in any way.  This should be the first step to parallelizing a problem, and is valid using any framework, language, or toolset.  However, this gives us a starting point – without a proper understanding of decomposition, it is difficult to understand the proper usage of specific classes and tools within the .NET framework. Data Decomposition is often the simpler abstraction to use when trying to parallelize a routine.  In order to decompose our problem domain by data, we take our entire set of data and break it into smaller, discrete portions, or chunks.  We then work on each chunk in the data set in parallel. This is particularly useful if we can process each element of data independently of the rest of the data.  In a situation like this, there are some wonderfully simple techniques we can use to take advantage of our data.  By decomposing our domain by data, we can very simply parallelize our routines.  In general, we, as developers, should be always searching for data that can be decomposed. Finding data to decompose if fairly simple, in many instances.  Data decomposition is typically used with collections of data.  Any time you have a collection of items, and you’re going to perform work on or with each of the items, you potentially have a situation where parallelism can be exploited.  This is fairly easy to do in practice: look for iteration statements in your code, such as for and foreach. Granted, every for loop is not a candidate to be parallelized.  If the collection is being modified as it’s iterated, or the processing of elements depends on other elements, the iteration block may need to be processed in serial.  However, if this is not the case, data decomposition may be possible. Let’s look at one example of how we might use data decomposition.  Suppose we were working with an image, and we were applying a simple contrast stretching filter.  When we go to apply the filter, once we know the minimum and maximum values, we can apply this to each pixel independently of the other pixels.  This means that we can easily decompose this problem based off data – we will do the same operation, in parallel, on individual chunks of data (each pixel). Task Decomposition, on the other hand, is focused on the individual tasks that need to be performed instead of focusing on the data.  In order to decompose our problem domain by tasks, we need to think about our algorithm in terms of discrete operations, or tasks, which can then later be parallelized. Task decomposition, in practice, can be a bit more tricky than data decomposition.  Here, we need to look at what our algorithm actually does, and how it performs its actions.  Once we have all of the basic steps taken into account, we can try to analyze them and determine whether there are any constraints in terms of shared data or ordering.  There are no simple things to look for in terms of finding tasks we can decompose for parallelism; every algorithm is unique in terms of its tasks, so every algorithm will have unique opportunities for task decomposition. For example, say we want our software to perform some customized actions on startup, prior to showing our main screen.  Perhaps we want to check for proper licensing, notify the user if the license is not valid, and also check for updates to the program.  Once we verify the license, and that there are no updates, we’ll start normally.  In this case, we can decompose this problem into tasks – we have a few tasks, but there are at least two discrete, independent tasks (check licensing, check for updates) which we can perform in parallel.  Once those are completed, we will continue on with our other tasks. One final note – Data Decomposition and Task Decomposition are not mutually exclusive.  Often, you’ll mix the two approaches while trying to parallelize a single routine.  It’s possible to decompose your problem based off data, then further decompose the processing of each element of data based on tasks.  This just provides a framework for thinking about our algorithms, and for discussing the problem.

    Read the article

  • How to Play FLAC Files in Windows 7 Media Center & Player

    - by Mysticgeek
    An annoyance for music lovers who enjoy FLAC format, is there’s no native support for WMP or WMC. If you’re a music enthusiast who prefers FLAC format, we’ll look at adding support to Windows 7 Media Center and Player. For the following article we are using Windows 7 Home Premium 32-bit edition. Download and Install madFLAC v1.8 The first thing we need to do is download and install the madFLAC v1.8 decoder (link below). Just unzip the file and run install.bat… You’ll get a message that it has been successfully registered, click Ok. To verify everything is working, open up one of your FLAC files with WMP, and you’ll get the following message. Check the box Don’t ask me again for this extension and click Yes. Now Media Player should play the track you’ve chosen.   Delete Current Music Library But what if you want to add your entire collection of FLAC files to the Library? If you already have it set up as your default music player, unfortunately we need to remove the current library and delete the database. The best way to manage the music library in Windows 7 is via WMP 12. Since we don’t want to delete songs from the computer we need to Open WMP, press “Alt+T” and navigate to Tools \ Options \ Library.   Now uncheck the box Delete files from computer when deleted from library and click Ok. Now in your Library click “Ctrl + A” to highlight all of the songs in the Library, then hit the “Delete” key. If you have a lot of songs in your library (like on our system) you’ll see the following dialog box while it collects all of the information.   After all of the data is collected, make sure the radio button next to Delete from library only is marked and click Ok. Again you’ll see the Working progress window while the songs are deleted. Deleting Current Database Now we need to make sure we’re starting out fresh. Close out of Media Player, then we’ll basically follow the same directions The Geek pointed out for fixing the WMP Library. Click on Start and type in services.msc into the search box and hit Enter. Now scroll down and stop the service named Windows Media Player Network Sharing Service. Now, navigate to the following directory and the main file to delete CurrentDatabase_372.wmdb %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ Again, the main file to delete is CurrentDatabase_372.wmdb, though if you want, you can delete them all. If you’re uneasy about deleting these files, make sure to back them up first. Now after you restart WMP you can begin adding your FLAC files. For those of us with large collections, it’s extremely annoying to see WMP try to pick up all of your media by default. To delete the other directories go to Organize \ Manage Libraries then open the directories you want to remove. For example here we’re removing the default libraries it tries to check for music. Remove the directories you don’t want it to gather contents from in each of the categories. We removed all of the other collections and only added the FLAC music directory from our home server. SoftPointer Tag Support Plugin Even though we were able to get FLAC files to play in WMP and WMC at this point, there’s another utility from SoftPointer to add. It enables FLAC (and other file formats) to be picked up in the library much easier. It has a long name but is effective –M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center (link below). Just install it by accepting the defaults, and you’ll be glad you did. After installing it, and re-launching Media Player, give it some time to collect all of the data from your FLAC directory…it can take a while. In fact, if your collection is huge, just walk away and let it do its thing. If you try to use it right away, WMP slows down considerably while updating the library.   Once the library is setup you’ll be able to play your FLAC tunes in Windows 7 Media Center as well and Windows Media Player 12.   Album Art One caveat is that some of our albums didn’t show any cover art. But we were usually able to get it by right-clicking the album and selecting Find album info.   Then confirming the album information is correct…   Conclusion Although this seems like several steps to go through to play FLAC files in Windows 7 Media Center and Player, it seems to work really well after it’s set up. We haven’t tried this with a 64-bit machine, but the process should be similar, but you might want to make sure the codecs you use are 64-bit. We’re sure there are other methods out there that some of you use, and if so leave us a comment and tell us about it. Download madFlac V1.8  M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center from SoftPointer Similar Articles Productive Geek Tips How to Play .OGM Video Files in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Kantaris is a Unique Media Player Based on VLCEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7?

    Read the article

  • Fixing up Visual Studio&rsquo;s gitignore , using IFix

    - by terje
    Originally posted on: http://geekswithblogs.net/terje/archive/2014/06/13/fixing-up-visual-studiorsquos-gitignore--using-ifix.aspxDownload tool Is there anything wrong with the built-in Visual Studio gitignore ???? Yes, there is !  First, some background: When you set up a git repo, it should be small and not contain anything not really needed.  One thing you should not have in your git repo is binary files. These binary files may come from two sources, one is the output files, in the bin and obj folders.  If you have a  gitignore file present, which you should always have (!!), these folders are excluded by the standard included file (the one included when you choose Team Explorer/Settings/GitIgnore – Add.) The other source are the packages folder coming from your NuGet setup.  You do use NuGet, right ?  Of course you do !  But, that gitignore file doesn’t have any exclude clause for those folders.  You have to add that manually.  (It will very probably be included in some upcoming update or release).  This is one thing that is missing from the built-in gitignore. To add those few lines is a no-brainer, you just include this: # NuGet Packages packages/* *.nupkg # Enable "build/" folder in the NuGet Packages folder since # NuGet packages use it for MSBuild targets. # This line needs to be after the ignore of the build folder # (and the packages folder if the line above has been uncommented) !packages/build/ Now, if you are like me, and you probably are, you add git repo’s faster than you can code, and you end up with a bunch of repo’s, and then start to wonder: Did I fix up those gitignore files, or did I forget it? The next thing you learn, for example by reading this blog post, is that the “standard” latest Visual Studio gitignore file exist at https://github.com/github/gitignore, and you locate it under the file name VisualStudio.gitignore.  Here you will find all the new stuff, for example, the exclusion of the roslyn ide folders was commited on May 24th.  So, you think, all is well, Visual Studio will use this file …..     I am very sorry, it won’t. Visual Studio comes with a gitignore file that is baked into the release, and that is by this time “very old”.  The one at github is the latest.  The included gitignore miss the exclusion of the nuget packages folder, it also miss a lot of new stuff, like the Roslyn stuff. So, how do you fix this ?  … note .. while we wait for the next version… You can manually update it for every single repo you create, which works, but it does get boring after a few times, doesn’t it ? IFix Enter IFix ,  install it from here. IFix is a command line utility (and the installer adds it to the system path, you might need to reboot), and one of the commands is gitignore If you run it from a directory, it will check and optionally fix all gitignores in all git repo’s in that folder or below.  So, start up by running it from your C:/<user>/source/repos folder. To run it in check mode – which will not change anything, just do a check: IFix  gitignore --check What it will do is to check if the gitignore file is present, and if it is, check if the packages folder has been excluded.  If you want to see those that are ok, add the --verbose command too.  The result may look like this: Fixing missing packages Let us fix a single repo by adding the missing packages structure,  using IFix --fix We first check, then fix, then check again to verify that the gitignore is correct, and that the “packages/” part has been added. If we open up the .gitignore, we see that the block shown below has been added to the end of the .gitignore file.   Comparing and fixing with latest standard Visual Studio gitignore (from github) Now, this tells you if you miss the nuget packages folder, but what about the latest gitignore from github ? You can check for this too, just add the option –merge (why this is named so will be clear later down) So, IFix gitignore --check –merge The result may come out like this  (sorry no colors, not got that far yet here): As you can see, one repo has the latest gitignore (test1), the others are missing either 57 or 150 lines.  IFix has three ways to fix this: --add --merge --replace The options work as follows: Add:  Used to add standard gitignore in the cases where a .gitignore file is missing, and only that, that means it won’t touch other existing gitignores. Merge: Used to merge in the missing lines from the standard into the gitignore file.  If gitignore file is missing, the whole standard will be added. Replace: Used to force a complete replacement of the existing gitignore with the standard one. The Add and Replace options can be used without Fix, which means they will actually do the action. If you combine with --check it will otherwise not touch any files, just do a verification.  So a Merge Check will  tell you if there is any difference between the local gitignore and the standard gitignore, a Compare in effect. When you do a Fix Merge it will combine the local gitignore with the standard, and add what is missing to the end of the local gitignore. It may mean some things may be doubled up if they are spelled a bit differently.  You might also see some extra comments added, but they do no harm. Init new repo with standard gitignore One cool thing is that with a new repo, or a repo that is missing its gitignore, you can grab the latest standard just by using either the Add or the Replace command, both will in effect do the same in this case. So, IFix gitignore --add will add it in, as in the complete example below, where we set up a new git repo and add in the latest standard gitignore: Notes The project is open sourced at github, and you can also report issues there.

    Read the article

  • Convert Excel File 'xls' to CSV, CAUTION: Bumps Ahead

    - by faizanahmad
    The task was to provide users with an interface where they can upload the 'csv' files, these files were to be processed and loaded to Database by a Console application. The code in Console application could not handle the 'xls' files so we thought, OK, lets convert 'xls' to 'csv' in the code, Seemed like fun. The idea was to convert it right after uploading within 'csv' file. As Microsoft does not recommend using the  Excel objects in ASP.NET, we decided to use the Jet engine to open xls. (Ace driver is used for xlsx) The code was pretty straight, can be found on following links: http://www.c-sharpcorner.com/uploadfile/yuanwang200409/102242008174401pm/1.aspx http://www.devasp.net/net/articles/display/141.html FIRST BUMP 'OleDbException (0x80004005): Unspecified error' ( Impersonation ): The ablove code ran fine in my test web site and test console application, but it gave an 'OleDbException (0x80004005): Unspecified error' in main web site, turns out imperonation was set to True and as soon as I changed it to False, it did work. on My XP box, web site was running under user                   'ASPNET'  with imperosnation set to FALSE                   'IUSR_*' i.e IIS guest user with impersonation set to TRUE The weired part was that both users had same rights on the folders I was saving files to and on Excel app in DCOM Config.  We decided to give it a try on Windows Server 2003 with web site set to windows authentication ( impersonation = true ) and yes it did work. SECOND BUMP 'External table not in correct format': I got this error with some files and it appeared that the file from client has some metadata issues  ( when I opened the file in Excel and try to save it ,excel  would give me this error saying File can not be saved in current format ) and the error was caused by that. Some people were able to reslove the error by using "Extended Properties=HTML Import;" in connection string. But it did not work for me. We decided to detour from here and use Excel object :( as we had no control on client setting the meta deta of Excel files. Before third bump there were a ouple of small thingies like 'Retrieving the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 80070005' Fix can be found at http://blog.crowe.co.nz/archive/2006/03/02/589.aspx THIRD BUMP ( Could not get rid of the EXCEL process  ):  I has all the code in place to 'Quiet' the excel, but, it just did not work. work around was done to Kill the process as we knew no other application on server was using EXCEL.  The normal steps to quite the excel application worked just fine in console application though.   FOURTH BUMP: Code worked with one file 1 on my machine and with the other file 2 code will break. and the same code will work perfectly fine with file 2 on some other machine . We moved it to QA  ( Windows Server 2003 )and worked with every file just perfect. But , then there was another problem: one user can upload it and second cant, permissions on folder and DCOM Conifg checked. Another Detour: Uplooad the xls as it is and convert in Console application.   Lesson Learnt:  If its 'xlsx' use 'ACE Driver' or read xml within excel as recommneded by MS. If xls and you know its always going to be properly formatted  'jet Engine'  Code: Imports Microsoft.Office.Interop Private Function ConvertFile(ByVal SourceFolder As String, ByVal FileName As String, ByVal FileExtension As String)As Boolean     Dim appExcel As New Excel.Application     Dim workBooks As Excel.Workbooks = appExcel.Workbooks     Dim objWorkbook As Excel.Workbook      Try                   objWorkbook = workBooks.Open(CompleteFilePath )                            objWorkbook.SaveAs(Filename:=CObj(SourceFolder & FileName & ".csv"), FileFormat:=Excel.XlFileFormat.xlCSV)       Catch ex As Exception         GenerateAlert(ex.Message().Replace("'", "") & " Error Converting File to CSV.")         LogError(ex )         Return False      Finally                      If Not(objWorkbook is Nothing) then               objWorkbook.Close(SaveChanges:=CObj(False))           End If           ReleaseObj(objWorkbook)                                      ReleaseObj(workBooks)           appExcel.Quit()           ReleaseObj(appExcel)                                 Dim proc As System.Diagnostics.Process           For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")               proc.Kill()           Next         DeleteSourceFile(SourceFolder & FileName & FileExtension)     End Try  Return True  End Function   Private Sub ReleaseObj(ByVal o As Object)     Try      System.Runtime.InteropServices.Marshal.ReleaseComObject(o)   Catch ex As Exception           LogError(ex )   Finally      o = Nothing    End Try End Sub     Protected Sub DeleteSourceFile(Byval CompleteFilePath As string)         Try             Dim MyFile As FileInfo = New FileInfo(CompleteFilePath)             If  MyFile.Exists Then                 File.Delete(CompleteFilePath)             Else              Throw New FileNotFoundException()             End If         Catch ex As Exception             GenerateAlert( " Source File could not be deleted.")              LogError(ex)         End Try     End Sub  The code to kill the process ( Avoid it if you can ): Dim proc As System.Diagnostics.Process For Each proc In System.Diagnostics.Process.GetProcessesByName("EXCEL")     proc.Kill() Next

    Read the article

  • SQL Developer Blitz at ODTUG Kscope12

    - by thatjeffsmith
    Oracle Development Tools User Group (ODTUG) puts on an outstanding event, and I enjoy that the content comes FIRST. Yes, the after-event parties and entertainment are first class, but I look forward most to sitting in on some excellent sessions. For Kscope12 one would expect Oracle to have a large presence, and you would be absolutely correct! The APEX team will be there in full force, and we’ll have sessions on JDeveloper, ADF, and .NET. But what I want to talk about today is our awesome line-up of coverage for Oracle SQL Developer (Surprise!) DB and Developer’s Toolbox Symposium Kris Rice or @krisrice, Product Development Manager for SQL Developer, will speak at 10AM Sunday about SQL Developer Data Modeler. Our free data modeling solution allows one to reverse engineer a data dictionary to a model, modify it, and create a script of the changes. Collaboration is an important part of any development team; with built-in subversion support, the modeler makes collaboration easy, not just possible. After the morning break, I’ll be talking about SQL Developer’s PL/SQL support. From creating your code, to debugging, tuning, testing, and documenting PL/SQL – SQL Developer fits the bill. Since I have a full hour, I should have time to do a little riff on using source control to version and manage your revisions too! At 3:15 Jagan Athreya will talk about the new integration between SQL Developer and Enterprise Manager Cloud Control 12c. Enabling developers to define changes in SQLDeveloper and allowing DBAs to promote these changes to Test and Production via Enterprise Manager will reduce errors, accelerate productivity, and help eliminate unplanned downtime. Get your SQL Developer groove on at ODTUG Kscope12! Presentations SQL Developer Tips and Tricks Monday June 25, Session 5, 4:15 pm – 5:15 pm I’ll take you through my favorite keyboard shortcuts, top 10 preferences every user should tweak, and spotlight features that the average user probably hasn’t discovered yet. My goal for this session is for everyone to take 1-2 tips they can implement immediately to save mucho time. I enjoy interacting with the audience so no two versions of this presentation are the same. Oracle SQL Developer and Data Modeler New Features When: Tuesday June 26, Session 6, 8:30 am – 9:30 am Ashley Chen, my PM-partner-in-crime, will be covering all the new features from our two latest updates. So if you’re new to SQL Developer, or you’ve been using an older version, stop by and see what new toys you have to play with. I also have a bet with Ashley that she will have more attendees than me, so be sure to show up so I can collect. Debugging PL/SQL With SQL Developer When: Wednesday June 27, Session 16, 3:00 pm – 4:00 pm Me again – sorry. This time I have an entire hour to JUST talk about PL/SQL and debugging! Should you use a watch with a break condition, or a breakpoint with a passcount? How does external debugging with a Perl script work? Can I just debug an anonymous PL/SQL block. So if debugging to you is just a DBMS_OUTPUT.PUT_LINE() call, stop by and see how our IDE can help you take things to the next level! Or is that level++? Hands-on-Training SQL Developer Soup to Nuts When: Tuesday, 8:00 AM – 9:30 AM If you learn by doing, this is the session for you. Bring your own laptop or use one of the lab machines. We’ll give you a VirtualBox OEL image running 11gR2 EE Database with all the fixin’s (that’s Southern speak for Partitioning, Advanced Compression, Tuning & Diagnostic Packs, etc), TimesTen, APEX and much more. All you have to do is login and run through our lab exercises. You can start with a model and work your way up to debugging and testing your own appliction, or you can pick and choose your lessons to suit your needs. We’ll have people on hand to help you out and answer your questions. Booth Hours We’ll be in the vendor area and have our very own ‘demo pod’ for SQL Developer. Between Kris, Ashley, and I we should be able to answer your questions or show you how to ‘do that thing’ in the tool. Or just stop by and say hello! We’ll be around the following hours’ish: Sunday, June 24, 2012 6:00 PM – 8:00 PM Monday, June 25, 2012 9:00 AM – 4:30 PM Tuesday, June 26, 2012 9:30 AM – 3:30 PM Wednesday, June 27, 2012 10:15 AM – 2:00 PM No Excuses – If You Have Questions, This is Your Chance to Get Your Answers! We’re doing just about everything outside of a scavenger hunt to bring information and value to our users. Let us know what you like, what you don’t like, and we’ll do our best to do more of the former and less of the latter!

    Read the article

  • Kaiden and the Arachnoid Cyst

    - by Martin Hinshelwood
    Some of you may remember when my son Kaiden was born I posted pictures of him and his sister. Kaiden is now 15 months old and is progressing perfectly in every area except that and we had been worried that he was not walking yet. We were only really concerned as his sister was walking at 8 months. Figure: Kai as his usual self   Jadie and I were concerned over that and that he had a rather large head (noggin) so we talked to various GP’s and our health visitor who immediately dismissed our concerns every time. That was until about two months ago when we happened to get a GP whose daughter had Hyper Mobility and she recognised the symptoms immediately. We were referred to the Southbank clinic who were lovely and the paediatrician confirmed that he had Hyper Mobility after testing all of his faculties. This just means that his joints are overly mobile and would need a little physiotherapy to help him out. At the end the paediatrician remarked offhand that he has a rather large head and wanted to measure it. Sure enough he was a good margin above the highest percentile mark for his height and weight. The paediatrician showed the measurements to a paediatric consultant who, as a precautionary measure, referred us for an MRI at Yorkhill Children's hospital. Now, Yorkhill has always been fantastic to us, and this was no exception. You know we have NEVER had a correct diagnosis for the kids (with the exception of the above) from a GP and indeed twice have been proscribed incorrect medication that made the kids sicker! We now always go strait to Yorkhill to save them having to fix GP mistakes as well. Monday 24th May, 7pm The scan went fantastically, with Kaiden sleeping in the MRI machine for all but 5 minutes at the end where he waited patiently for it to finish. We were not expecting anything to be wrong as this was just a precautionary scan to make sure that nothing in his head was affecting his gross motor skills. After the scan we were told to expect a call towards the end of the week… Tuesday 25th May, 12pm The very next day we got a call from Southbank who said that they has found an Arachnoid Cyst and could we come in the next day to see a Consultant and that Kai would need an operation. Wednesday 26th May, 12:30pm We went into the Southbank clinic and spoke to the paediatric consultant who assured us that it was operable but that it was taking up considerable space in Kai’s head. Cerebrospinal fluid is building up as a cyst is blocking the channels it uses to drain. Thankfully they told us that prospects were good and that Kai would expect to make a full recovery before showing us the MRI pictures. Figure: Normal brain MRI cross section. This normal scan shows the spaces in the middle of the brain that contain and produce the Cerebrospinal fluid. Figure: Normal Cerebrospinal Flow This fluid is needed by the brain but is drained in the middle down the spinal column. Figure: Kai’s cyst blocking the four channels. I do not think that I need to explain the difference between the healthy picture and Kai’s picture. However you can see in this first picture the faint outline of the cyst in the middle that is blocking the four channels from draining. After seeing the scans a Neurosurgeon has decided that he is not acute, but needs an operation to unblock the flow. Figure: OMFG! You can see in the second picture the effect of the build up of fluid. If I was not horrified by the first picture I was seriously horrified by this one. What next? Kai is not presenting the symptoms of vomiting or listlessness that would show an immediate problem and as such we will get an appointment to see the Paediatric Neurosurgeon at the Southern General hospital in about 4 weeks. This timescale is based on the Neurosurgeon seeing the scans. After that Kai will need an operation to release the pressure and either remove the cyst completely or put in a permanent shunt (tube from brain to stomach) to bypass the blockage. We have updated his notes for the referral with additional recent information on top of the scan that the consultant things will help improve the timescales, but that is just a guess.   All we can do now is wait and see, and be watchful for tell tail signs of listlessness, eye problems and vomiting that would signify a worsening of his condition.   Technorati Tags: Personal

    Read the article

  • Interview with Tomas Ulin at the MySQL Innovation Day

    - by Monica Kumar
    MySQL Innovation Day held on June 5, 2012 was a great event for the MySQL engineers, users and customers to gather, share and network. I was able to get a few minutes with Tomas Ulin, Vice President of MySQL Engineering at Oracle, to ask him some questions. Here are the highlights of my interview with Tomas. Monica: This was the first MySQL Innovation Day, correct?  Why now, what was the strategy behind hosting this kind of event? Tomas: In the last year, we have rolled out an incredible number of MySQL events worldwide – some targeted at developers that are new to MySQL and others for the MySQL savvy. At the MySQL Innovation Day, our first event of this kind,, we had a number of our key engineers presenting lightning talks delivering previews of key new features as well as discussing roadmap. Our goal is to keep an open dialogue with the MySQL community. In fact, we are hosting a two-day conference, another first, for the MySQL community called MySQL Connect on Sept. 29-30 in San Francisco. If you attended the MySQL Innovation Day and liked what we did, you are going to love MySQL Connect. We’ll have a lot more of our engineers and many users and community members presenting hour long sessions and hands on labs. Our engineers will be presenting new MySQL features as well offer previews of upcoming enhancements. Monica: What's the big take-away from today's MySQL Innovation Day? Tomas: I hope the most important takeaway for attendees was to see that Oracle has been driving, and continues to drive MySQL innovation with a steady stream of new great GA and Development Milestone releases. Monica: What were attendees most interested in? What feedback did they have? Tomas: Feedback from attendees was incredibly positive and encouraging. In particular, they liked the interaction with the MySQL engineers and were also excited about the new early access features in MySQL 5.6 and MySQL Cluster 7.3. In addition, sessions delivered by MySQL users like Facebook, Pinterest and Twitter were very well received. For example, Pinterest talked about using MySQL to scale from 0 to billions of page views/month, Twitter talked about “Scaling twitter with MySQL” and Facebook discussed the many options to implement MySQL master failover solutions. The presentations are already available for download while some of the session videos will be made available on the MySQL Innovation Day web page shortly. Monica: How would you distinguish the use of MySQL vs. Oracle Database? What key factors should customers consider? Tomas: MySQL and Oracle Database complement each other. They are very different products, best suited to different use cases. Customers can choose world-class solutions from Oracle to fulfill a variety of needs. MySQL is a great choice for enterprise web-based, custom and embedded apps. Oracle Database is the leading choice for enterprise packaged applications such as ERP, CRM as well as high-end data warehousing and business intelligence applications. Monica: What are the highlights of the current MySQL 5.6 Development Milestone Release and early access features for MySQL Cluster 7.3? Tomas: MySQL 5.6 development milestone release builds on MySQL 5.5 by improving: Optimizer for better Performance, Scalability Performance Schema for better instrumentation InnoDB for better transactional throughput Replication for higher availability, data integrity NoSQL options for more flexibility We announced some new early access features in MySQL 5.6, including binary log group commit. We also announced early access features in MySQL Cluster 7.3 including support for foreign key constraints. Monica: How do people get these releases? Tomas: You can access development milestone releases by going to: http://dev.mysql.com/downloads/mysqlThen select the “Development Release” tab. The MySQL Cluster 7.3 and other early access features can be downloaded at: http://labs.mysql.com Monica: What's coming up next for MySQL? Tomas: Our development team is working in overdrive, cranking out new features with community feedback. Don’t miss the MySQL Connect conference being held in San Francisco on Sept. 29 and 30th. My team and I will be there. I hope you can join us! Monica: Thank you for your time, Tomas. I look forward to seeing you at the MySQL Connect conference. To our followers, I hope you found this interview informative. I welcome your comments. Please stay tuned here for more updates on MySQL. Note: Monica Kumar is Senior Director of product marketing for Linux, Virtualization and MySQL at Oracle.

    Read the article

  • Toorcon 15 (2013)

    - by danx
    The Toorcon gang (senior staff): h1kari (founder), nfiltr8, and Geo Introduction to Toorcon 15 (2013) A Tale of One Software Bypass of MS Windows 8 Secure Boot Breaching SSL, One Byte at a Time Running at 99%: Surviving an Application DoS Security Response in the Age of Mass Customized Attacks x86 Rewriting: Defeating RoP and other Shinanighans Clowntown Express: interesting bugs and running a bug bounty program Active Fingerprinting of Encrypted VPNs Making Attacks Go Backwards Mask Your Checksums—The Gorry Details Adventures with weird machines thirty years after "Reflections on Trusting Trust" Introduction to Toorcon 15 (2013) Toorcon 15 is the 15th annual security conference held in San Diego. I've attended about a third of them and blogged about previous conferences I attended here starting in 2003. As always, I've only summarized the talks I attended and interested me enough to write about them. Be aware that I may have misrepresented the speaker's remarks and that they are not my remarks or opinion, or those of my employer, so don't quote me or them. Those seeking further details may contact the speakers directly or use The Google. For some talks, I have a URL for further information. A Tale of One Software Bypass of MS Windows 8 Secure Boot Andrew Furtak and Oleksandr Bazhaniuk Yuri Bulygin, Oleksandr ("Alex") Bazhaniuk, and (not present) Andrew Furtak Yuri and Alex talked about UEFI and Bootkits and bypassing MS Windows 8 Secure Boot, with vendor recommendations. They previously gave this talk at the BlackHat 2013 conference. MS Windows 8 Secure Boot Overview UEFI (Unified Extensible Firmware Interface) is interface between hardware and OS. UEFI is processor and architecture independent. Malware can replace bootloader (bootx64.efi, bootmgfw.efi). Once replaced can modify kernel. Trivial to replace bootloader. Today many legacy bootkits—UEFI replaces them most of them. MS Windows 8 Secure Boot verifies everything you load, either through signatures or hashes. UEFI firmware relies on secure update (with signed update). You would think Secure Boot would rely on ROM (such as used for phones0, but you can't do that for PCs—PCs use writable memory with signatures DXE core verifies the UEFI boat loader(s) OS Loader (winload.efi, winresume.efi) verifies the OS kernel A chain of trust is established with a root key (Platform Key, PK), which is a cert belonging to the platform vendor. Key Exchange Keys (KEKs) verify an "authorized" database (db), and "forbidden" database (dbx). X.509 certs with SHA-1/SHA-256 hashes. Keys are stored in non-volatile (NV) flash-based NVRAM. Boot Services (BS) allow adding/deleting keys (can't be accessed once OS starts—which uses Run-Time (RT)). Root cert uses RSA-2048 public keys and PKCS#7 format signatures. SecureBoot — enable disable image signature checks SetupMode — update keys, self-signed keys, and secure boot variables CustomMode — allows updating keys Secure Boot policy settings are: always execute, never execute, allow execute on security violation, defer execute on security violation, deny execute on security violation, query user on security violation Attacking MS Windows 8 Secure Boot Secure Boot does NOT protect from physical access. Can disable from console. Each BIOS vendor implements Secure Boot differently. There are several platform and BIOS vendors. It becomes a "zoo" of implementations—which can be taken advantage of. Secure Boot is secure only when all vendors implement it correctly. Allow only UEFI firmware signed updates protect UEFI firmware from direct modification in flash memory protect FW update components program SPI controller securely protect secure boot policy settings in nvram protect runtime api disable compatibility support module which allows unsigned legacy Can corrupt the Platform Key (PK) EFI root certificate variable in SPI flash. If PK is not found, FW enters setup mode wich secure boot turned off. Can also exploit TPM in a similar manner. One is not supposed to be able to directly modify the PK in SPI flash from the OS though. But they found a bug that they can exploit from User Mode (undisclosed) and demoed the exploit. It loaded and ran their own bootkit. The exploit requires a reboot. Multiple vendors are vulnerable. They will disclose this exploit to vendors in the future. Recommendations: allow only signed updates protect UEFI fw in ROM protect EFI variable store in ROM Breaching SSL, One Byte at a Time Yoel Gluck and Angelo Prado Angelo Prado and Yoel Gluck, Salesforce.com CRIME is software that performs a "compression oracle attack." This is possible because the SSL protocol doesn't hide length, and because SSL compresses the header. CRIME requests with every possible character and measures the ciphertext length. Look for the plaintext which compresses the most and looks for the cookie one byte-at-a-time. SSL Compression uses LZ77 to reduce redundancy. Huffman coding replaces common byte sequences with shorter codes. US CERT thinks the SSL compression problem is fixed, but it isn't. They convinced CERT that it wasn't fixed and they issued a CVE. BREACH, breachattrack.com BREACH exploits the SSL response body (Accept-Encoding response, Content-Encoding). It takes advantage of the fact that the response is not compressed. BREACH uses gzip and needs fairly "stable" pages that are static for ~30 seconds. It needs attacker-supplied content (say from a web form or added to a URL parameter). BREACH listens to a session's requests and responses, then inserts extra requests and responses. Eventually, BREACH guesses a session's secret key. Can use compression to guess contents one byte at-a-time. For example, "Supersecret SupersecreX" (a wrong guess) compresses 10 bytes, and "Supersecret Supersecret" (a correct guess) compresses 11 bytes, so it can find each character by guessing every character. To start the guess, BREACH needs at least three known initial characters in the response sequence. Compression length then "leaks" information. Some roadblocks include no winners (all guesses wrong) or too many winners (multiple possibilities that compress the same). The solutions include: lookahead (guess 2 or 3 characters at-a-time instead of 1 character). Expensive rollback to last known conflict check compression ratio can brute-force first 3 "bootstrap" characters, if needed (expensive) block ciphers hide exact plain text length. Solution is to align response in advance to block size Mitigations length: use variable padding secrets: dynamic CSRF tokens per request secret: change over time separate secret to input-less servlets Future work eiter understand DEFLATE/GZIP HTTPS extensions Running at 99%: Surviving an Application DoS Ryan Huber Ryan Huber, Risk I/O Ryan first discussed various ways to do a denial of service (DoS) attack against web services. One usual method is to find a slow web page and do several wgets. Or download large files. Apache is not well suited at handling a large number of connections, but one can put something in front of it Can use Apache alternatives, such as nginx How to identify malicious hosts short, sudden web requests user-agent is obvious (curl, python) same url requested repeatedly no web page referer (not normal) hidden links. hide a link and see if a bot gets it restricted access if not your geo IP (unless the website is global) missing common headers in request regular timing first seen IP at beginning of attack count requests per hosts (usually a very large number) Use of captcha can mitigate attacks, but you'll lose a lot of genuine users. Bouncer, goo.gl/c2vyEc and www.github.com/rawdigits/Bouncer Bouncer is software written by Ryan in netflow. Bouncer has a small, unobtrusive footprint and detects DoS attempts. It closes blacklisted sockets immediately (not nice about it, no proper close connection). Aggregator collects requests and controls your web proxies. Need NTP on the front end web servers for clean data for use by bouncer. Bouncer is also useful for a popularity storm ("Slashdotting") and scraper storms. Future features: gzip collection data, documentation, consumer library, multitask, logging destroyed connections. Takeaways: DoS mitigation is easier with a complete picture Bouncer designed to make it easier to detect and defend DoS—not a complete cure Security Response in the Age of Mass Customized Attacks Peleus Uhley and Karthik Raman Peleus Uhley and Karthik Raman, Adobe ASSET, blogs.adobe.com/asset/ Peleus and Karthik talked about response to mass-customized exploits. Attackers behave much like a business. "Mass customization" refers to concept discussed in the book Future Perfect by Stan Davis of Harvard Business School. Mass customization is differentiating a product for an individual customer, but at a mass production price. For example, the same individual with a debit card receives basically the same customized ATM experience around the world. Or designing your own PC from commodity parts. Exploit kits are another example of mass customization. The kits support multiple browsers and plugins, allows new modules. Exploit kits are cheap and customizable. Organized gangs use exploit kits. A group at Berkeley looked at 77,000 malicious websites (Grier et al., "Manufacturing Compromise: The Emergence of Exploit-as-a-Service", 2012). They found 10,000 distinct binaries among them, but derived from only a dozen or so exploit kits. Characteristics of Mass Malware: potent, resilient, relatively low cost Technical characteristics: multiple OS, multipe payloads, multiple scenarios, multiple languages, obfuscation Response time for 0-day exploits has gone down from ~40 days 5 years ago to about ~10 days now. So the drive with malware is towards mass customized exploits, to avoid detection There's plenty of evicence that exploit development has Project Manager bureaucracy. They infer from the malware edicts to: support all versions of reader support all versions of windows support all versions of flash support all browsers write large complex, difficult to main code (8750 lines of JavaScript for example Exploits have "loose coupling" of multipe versions of software (adobe), OS, and browser. This allows specific attacks against specific versions of multiple pieces of software. Also allows exploits of more obscure software/OS/browsers and obscure versions. Gave examples of exploits that exploited 2, 3, 6, or 14 separate bugs. However, these complete exploits are more likely to be buggy or fragile in themselves and easier to defeat. Future research includes normalizing malware and Javascript. Conclusion: The coming trend is that mass-malware with mass zero-day attacks will result in mass customization of attacks. x86 Rewriting: Defeating RoP and other Shinanighans Richard Wartell Richard Wartell The attack vector we are addressing here is: First some malware causes a buffer overflow. The malware has no program access, but input access and buffer overflow code onto stack Later the stack became non-executable. The workaround malware used was to write a bogus return address to the stack jumping to malware Later came ASLR (Address Space Layout Randomization) to randomize memory layout and make addresses non-deterministic. The workaround malware used was to jump t existing code segments in the program that can be used in bad ways "RoP" is Return-oriented Programming attacks. RoP attacks use your own code and write return address on stack to (existing) expoitable code found in program ("gadgets"). Pinkie Pie was paid $60K last year for a RoP attack. One solution is using anti-RoP compilers that compile source code with NO return instructions. ASLR does not randomize address space, just "gadgets". IPR/ILR ("Instruction Location Randomization") randomizes each instruction with a virtual machine. Richard's goal was to randomize a binary with no source code access. He created "STIR" (Self-Transofrming Instruction Relocation). STIR disassembles binary and operates on "basic blocks" of code. The STIR disassembler is conservative in what to disassemble. Each basic block is moved to a random location in memory. Next, STIR writes new code sections with copies of "basic blocks" of code in randomized locations. The old code is copied and rewritten with jumps to new code. the original code sections in the file is marked non-executible. STIR has better entropy than ASLR in location of code. Makes brute force attacks much harder. STIR runs on MS Windows (PEM) and Linux (ELF). It eliminated 99.96% or more "gadgets" (i.e., moved the address). Overhead usually 5-10% on MS Windows, about 1.5-4% on Linux (but some code actually runs faster!). The unique thing about STIR is it requires no source access and the modified binary fully works! Current work is to rewrite code to enforce security policies. For example, don't create a *.{exe,msi,bat} file. Or don't connect to the network after reading from the disk. Clowntown Express: interesting bugs and running a bug bounty program Collin Greene Collin Greene, Facebook Collin talked about Facebook's bug bounty program. Background at FB: FB has good security frameworks, such as security teams, external audits, and cc'ing on diffs. But there's lots of "deep, dark, forgotten" parts of legacy FB code. Collin gave several examples of bountied bugs. Some bounty submissions were on software purchased from a third-party (but bounty claimers don't know and don't care). We use security questions, as does everyone else, but they are basically insecure (often easily discoverable). Collin didn't expect many bugs from the bounty program, but they ended getting 20+ good bugs in first 24 hours and good submissions continue to come in. Bug bounties bring people in with different perspectives, and are paid only for success. Bug bounty is a better use of a fixed amount of time and money versus just code review or static code analysis. The Bounty program started July 2011 and paid out $1.5 million to date. 14% of the submissions have been high priority problems that needed to be fixed immediately. The best bugs come from a small % of submitters (as with everything else)—the top paid submitters are paid 6 figures a year. Spammers like to backstab competitors. The youngest sumitter was 13. Some submitters have been hired. Bug bounties also allows to see bugs that were missed by tools or reviews, allowing improvement in the process. Bug bounties might not work for traditional software companies where the product has release cycle or is not on Internet. Active Fingerprinting of Encrypted VPNs Anna Shubina Anna Shubina, Dartmouth Institute for Security, Technology, and Society (I missed the start of her talk because another track went overtime. But I have the DVD of the talk, so I'll expand later) IPsec leaves fingerprints. Using netcat, one can easily visually distinguish various crypto chaining modes just from packet timing on a chart (example, DES-CBC versus AES-CBC) One can tell a lot about VPNs just from ping roundtrips (such as what router is used) Delayed packets are not informative about a network, especially if far away from the network More needed to explore about how TCP works in real life with respect to timing Making Attacks Go Backwards Fuzzynop FuzzyNop, Mandiant This talk is not about threat attribution (finding who), product solutions, politics, or sales pitches. But who are making these malware threats? It's not a single person or group—they have diverse skill levels. There's a lot of fat-fingered fumblers out there. Always look for low-hanging fruit first: "hiding" malware in the temp, recycle, or root directories creation of unnamed scheduled tasks obvious names of files and syscalls ("ClearEventLog") uncleared event logs. Clearing event log in itself, and time of clearing, is a red flag and good first clue to look for on a suspect system Reverse engineering is hard. Disassembler use takes practice and skill. A popular tool is IDA Pro, but it takes multiple interactive iterations to get a clean disassembly. Key loggers are used a lot in targeted attacks. They are typically custom code or built in a backdoor. A big tip-off is that non-printable characters need to be printed out (such as "[Ctrl]" "[RightShift]") or time stamp printf strings. Look for these in files. Presence is not proof they are used. Absence is not proof they are not used. Java exploits. Can parse jar file with idxparser.py and decomile Java file. Java typially used to target tech companies. Backdoors are the main persistence mechanism (provided externally) for malware. Also malware typically needs command and control. Application of Artificial Intelligence in Ad-Hoc Static Code Analysis John Ashaman John Ashaman, Security Innovation Initially John tried to analyze open source files with open source static analysis tools, but these showed thousands of false positives. Also tried using grep, but tis fails to find anything even mildly complex. So next John decided to write his own tool. His approach was to first generate a call graph then analyze the graph. However, the problem is that making a call graph is really hard. For example, one problem is "evil" coding techniques, such as passing function pointer. First the tool generated an Abstract Syntax Tree (AST) with the nodes created from method declarations and edges created from method use. Then the tool generated a control flow graph with the goal to find a path through the AST (a maze) from source to sink. The algorithm is to look at adjacent nodes to see if any are "scary" (a vulnerability), using heuristics for search order. The tool, called "Scat" (Static Code Analysis Tool), currently looks for C# vulnerabilities and some simple PHP. Later, he plans to add more PHP, then JSP and Java. For more information see his posts in Security Innovation blog and NRefactory on GitHub. Mask Your Checksums—The Gorry Details Eric (XlogicX) Davisson Eric (XlogicX) Davisson Sometimes in emailing or posting TCP/IP packets to analyze problems, you may want to mask the IP address. But to do this correctly, you need to mask the checksum too, or you'll leak information about the IP. Problem reports found in stackoverflow.com, sans.org, and pastebin.org are usually not masked, but a few companies do care. If only the IP is masked, the IP may be guessed from checksum (that is, it leaks data). Other parts of packet may leak more data about the IP. TCP and IP checksums both refer to the same data, so can get more bits of information out of using both checksums than just using one checksum. Also, one can usually determine the OS from the TTL field and ports in a packet header. If we get hundreds of possible results (16x each masked nibble that is unknown), one can do other things to narrow the results, such as look at packet contents for domain or geo information. With hundreds of results, can import as CSV format into a spreadsheet. Can corelate with geo data and see where each possibility is located. Eric then demoed a real email report with a masked IP packet attached. Was able to find the exact IP address, given the geo and university of the sender. Point is if you're going to mask a packet, do it right. Eric wouldn't usually bother, but do it correctly if at all, to not create a false impression of security. Adventures with weird machines thirty years after "Reflections on Trusting Trust" Sergey Bratus Sergey Bratus, Dartmouth College (and Julian Bangert and Rebecca Shapiro, not present) "Reflections on Trusting Trust" refers to Ken Thompson's classic 1984 paper. "You can't trust code that you did not totally create yourself." There's invisible links in the chain-of-trust, such as "well-installed microcode bugs" or in the compiler, and other planted bugs. Thompson showed how a compiler can introduce and propagate bugs in unmodified source. But suppose if there's no bugs and you trust the author, can you trust the code? Hell No! There's too many factors—it's Babylonian in nature. Why not? Well, Input is not well-defined/recognized (code's assumptions about "checked" input will be violated (bug/vunerabiliy). For example, HTML is recursive, but Regex checking is not recursive. Input well-formed but so complex there's no telling what it does For example, ELF file parsing is complex and has multiple ways of parsing. Input is seen differently by different pieces of program or toolchain Any Input is a program input executes on input handlers (drives state changes & transitions) only a well-defined execution model can be trusted (regex/DFA, PDA, CFG) Input handler either is a "recognizer" for the inputs as a well-defined language (see langsec.org) or it's a "virtual machine" for inputs to drive into pwn-age ELF ABI (UNIX/Linux executible file format) case study. Problems can arise from these steps (without planting bugs): compiler linker loader ld.so/rtld relocator DWARF (debugger info) exceptions The problem is you can't really automatically analyze code (it's the "halting problem" and undecidable). Only solution is to freeze code and sign it. But you can't freeze everything! Can't freeze ASLR or loading—must have tables and metadata. Any sufficiently complex input data is the same as VM byte code Example, ELF relocation entries + dynamic symbols == a Turing Complete Machine (TM). @bxsays created a Turing machine in Linux from relocation data (not code) in an ELF file. For more information, see Rebecca "bx" Shapiro's presentation from last year's Toorcon, "Programming Weird Machines with ELF Metadata" @bxsays did same thing with Mach-O bytecode Or a DWARF exception handling data .eh_frame + glibc == Turning Machine X86 MMU (IDT, GDT, TSS): used address translation to create a Turning Machine. Page handler reads and writes (on page fault) memory. Uses a page table, which can be used as Turning Machine byte code. Example on Github using this TM that will fly a glider across the screen Next Sergey talked about "Parser Differentials". That having one input format, but two parsers, will create confusion and opportunity for exploitation. For example, CSRs are parsed during creation by cert requestor and again by another parser at the CA. Another example is ELF—several parsers in OS tool chain, which are all different. Can have two different Program Headers (PHDRs) because ld.so parses multiple PHDRs. The second PHDR can completely transform the executable. This is described in paper in the first issue of International Journal of PoC. Conclusions trusting computers not only about bugs! Bugs are part of a problem, but no by far all of it complex data formats means bugs no "chain of trust" in Babylon! (that is, with parser differentials) we need to squeeze complexity out of data until data stops being "code equivalent" Further information See and langsec.org. USENIX WOOT 2013 (Workshop on Offensive Technologies) for "weird machines" papers and videos.

    Read the article

  • Using C# 4.0’s DynamicObject as a Stored Procedure Wrapper

    - by EltonStoneman
    [Source: http://geekswithblogs.net/EltonStoneman] Overview Ignoring the fashion, I still make a lot of use of DALs – typically when inheriting a codebase with an established database schema which is full of tried and trusted stored procedures. In the DAL a collection of base classes have all the scaffolding, so the usual pattern is to create a wrapper class for each stored procedure, giving typesafe access to parameter values and output. DAL calls then looks like instantiate wrapper-populate parameters-execute call:       using (var sp = new uspGetManagerEmployees())     {         sp.ManagerID = 16;         using (var reader = sp.Execute())         {             //map entities from the output         }     }   Or rolling it all into a fluent DAL call – which is nicer to read and implicitly disposes the resources:   This is fine, the wrapper classes are very simple to handwrite or generate. But as the codebase grows, you end up with a proliferation of very small wrapper classes: The wrappers don't add much other than encapsulating the stored procedure call and giving you typesafety for the parameters. With the dynamic extension in .NET 4.0 you have the option to build a single wrapper class, and get rid of the one-to-one stored procedure to wrapper class mapping. In the dynamic version, the call looks like this:       dynamic getUser = new DynamicSqlStoredProcedure("uspGetManagerEmployees", Database.AdventureWorks);     getUser.ManagerID = 16;       var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From(getUser);   The important difference is that the ManagerId property doesn't exist in the DynamicSqlStoredProcedure class. Declaring the getUser object with the dynamic keyword allows you to dynamically add properties, and the DynamicSqlStoredProcedure class intercepts when properties are added and builds them as stored procedure parameters. When getUser.ManagerId = 16 is executed, the base class adds a parameter call (using the convention that parameter name is the property name prefixed by "@"), specifying the correct SQL Server data type (mapping it from the type of the value the property is set to), and setting the parameter value. Code Sample This is worked through in a sample project on github – Dynamic Stored Procedure Sample – which also includes a static version of the wrapper for comparison. (I'll upload this to the MSDN Code Gallery once my account has been resurrected). Points worth noting are: DynamicSP.Data – database-independent DAL that has all the data plumbing code. DynamicSP.Data.SqlServer – SQL Server DAL, thin layer on top of the generic DAL which adds SQL Server specific classes. Includes the DynamicSqlStoredProcedure base class. DynamicSqlStoredProcedure.TrySetMember. Invoked when a dynamic member is added. Assumes the property is a parameter named after the SP parameter name and infers the SqlDbType from the framework type. Adds a parameter to the internal stored procedure wrapper and sets its value. uspGetManagerEmployees – the static version of the wrapper. uspGetManagerEmployeesTest – test fixture which shows usage of the static and dynamic stored procedure wrappers. The sample uses stored procedures from the AdventureWorks database in the SQL Server 2008 Sample Databases. Discussion For this scenario, the dynamic option is very favourable. Assuming your DAL is itself wrapped by a higher layer, the stored procedure wrapper classes have very little reuse. Even if you're codegening the classes and test fixtures, it's still additional effort for very little value. The main consideration with dynamic classes is that the compiler ignores all the members you use, and evaluation only happens at runtime. In this case where scope is strictly limited that's not an issue – but you're relying on automated tests rather than the compiler to find errors, but that should just encourage better test coverage. Also you can codegen the dynamic calls at a higher level. Performance may be a consideration, as there is a first-time-use overhead when the dynamic members of an object are bound. For a single run, the dynamic wrapper took 0.2 seconds longer than the static wrapper. The framework does a good job of caching the effort though, so for 1,000 calls the dynamc version still only takes 0.2 seconds longer than the static: You don't get IntelliSense on dynamic objects, even for the declared members of the base class, and if you've been using class names as keys for configuration settings, you'll lose that option if you move to dynamics. The approach may make code more difficult to read, as you can't navigate through dynamic members, but you do still get full debugging support.     var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From<uspGetManagerEmployees>                             (                                 i => i.ManagerID = 16,                                 x => x.Execute()                             );

    Read the article

  • SQLAuthority News – Don’t Be Afraid To Fool The World – Video by John Sonmez

    - by Pinal Dave
    Sometime some words and statements grabs your attention and it is hard to stop thinking about that after a while. Something similar happened a few days ago when I read the twitter statement of my friend and Pluralsight author John Sonmez. He twitted few days ago very interesting statement. “I don’t know a single successful person, who doesn’t deep down think that have the world fooled. #fooltheworld” by John Sonmez. When I read it, I was extremely intrigued by this statement. I read it many times, I shared with my family and I just could not stop interpreting this statement. It was indeed fun to read it again and again and there are so many different meanings one can take away from the statement. I know John very well, he is a  wonderful person and have very positive energy for the life. I just had to request him to build a video around it. Right after 5 days of my request, John created a wonderful video around this subject. I watched it multiple times as it was a wonderful video. I am not going to write about what was in the video much as I suggest you to watch the video itself. Here is one of the personal stories I want to share which is absolutely relevant to this video. I think my story 100% resonant the story of John. A Real Story from My Past Three years ago, I submitted a session in one of the SharePoint conference as a SQL Server session. My session was accepted and I prepared it very well. I put more than 2 month’s time to prepare for the session and I was very excited to present the session. I reached to the event place traveling thousands of the miles and I was very much excited to present the session. However, there was a little mixed up in the session. There were multiple session which were similar to my session title. One of the other speakers also had proposed a database related session and was selected. When the material went to print the printing team got confused and by mistake swapped the sessions. The other speaker got Performance with SQL Server session and I had received Performance with SharePoint session. IT was indeed a big mixed up but now that is how it was in the event guide and it was marketed the same way everything in the event. A Big Mix Up I had to talk with the event organizer and we come to the conclusion that we all had good intention but things just got mixed up and now was the time when “The show must go on“. I had a great amount of hesitation to go and present the session as I had personally never worked with Sharepoint so close in my life and my session abstracted talked about SharePoint tricks in depth. Two hours before the session I took the help of one of my friend and installed the SharePoint on my box. He showed me a few things here and there but it was never a good enough time to learn everything which I wanted to learn. The Moments of Confidence I was very scared and nervous to go on the stage as a SharePoint was not something I felt comfortable. However, I decided to go on stage with confidence as a SharePoint expert. Though I did not know SharePoint at the best, I had confidence that whatever I know is correct and I will not misguide people. I had no intention to fool people but I had no intention to accept that I am a fool and you all wasted your time and money to dedicate your time to attend my session. I decided to be honest but at the same time decided to take the session beyond my expertise. The sixty minutes of the session went very fine and I was able to manage all the difficult question at a satisfactory level. When the session was over my feeling was that I would have not presented or talked any different if I had more knowledge of the SharePoint at that time. I think it was one of my best sessions and it was reflected in the session feedback as well. I was the best speaker across all the track and my session had highest ranking. I was delighted and I learned a very valuable lesson. I must go beyond my limits and knowledge. I must aim higher and work harder. I should not lie but I should have confidence that I have a good heart and I put 100% in my efforts.  Lessions Learned Since this incident I have learned a lot about SharePoint and I am now a regular speaker at various SharePoint conferences along with SQL Server sessions. I am motivated and I am not afraid. I know people have lots of expectation from me but I have learned not to judge myself before I do my best. I leave the judgement of my efforts to my audience. I do not take the burden of the feedback on me, even though I know my audience have expected from me. I know what I know and I put my best. I must go out, if I fail, I learn from my mistake but I must keep my progress trajectory very high. As John said in the video, sometime success is not something we can achieve 100% but we can keep on going near to it. As long as we do not lose our focus from our goal and do not deviate from our progress path, we are doing things right. Reference: Pinal Dave (http://blog.sqlauthority.com)  Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • jQuery 1.4 Opacity and IE Filters

    - by Rick Strahl
    Ran into a small problem today with my client side jQuery library after switching to jQuery 1.4. I ran into a problem with a shadow plugin that I use to provide drop shadows for absolute elements – for Mozilla WebKit browsers the –moz-box-shadow and –webkit-box-shadow CSS attributes are used but for IE a manual element is created to provide the shadow that underlays the original element along with a blur filter to provide the fuzziness in the shadow. Some of the key pieces are: var vis = el.is(":visible"); if (!vis) el.show(); // must be visible to get .position var pos = el.position(); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); This has always worked in previous versions of jQuery, but with 1.4 the original filter no longer works. It appears that applying the opacity after the original filter wipes out the original filter. IOW, the opacity filter is not applied incrementally, but absolutely which is a real bummer. Luckily the workaround is relatively easy by just switching the order in which the opacity and filter are applied. If I apply the blur after the opacity I get my correct behavior back with both opacity: sh.show() .css({ position: "absolute", width: el.outerWidth(), height: el.outerHeight(), opacity: opt.opacity, background: opt.color, left: pos.left + opt.offset, top: pos.top + opt.offset }); if (typeof shEl.style.filter == "string") sh.css("filter", 'progid:DXImageTransform.Microsoft.Blur(makeShadow=true, pixelradius=3, shadowOpacity=' + opt.opacity.toString() + ')'); While this works this still causes problems in other areas where opacity is implicitly set in code such as for fade operations or in the case of my shadow component the style/property watcher that keeps the shadow and main object linked. Both of these may set the opacity explicitly and that is still broken as it will effectively kill the blur filter. This seems like a really strange design decision by the jQuery team, since clearly the jquery css function does the right thing for setting filters. Internally however, the opacity setting doesn’t use .css instead hardcoding the filter which given jQuery’s usual flexibility and smart code seems really inappropriate. The following is from jQuery.js 1.4: var style = elem.style || elem, set = value !== undefined; // IE uses filters for opacity if ( !jQuery.support.opacity && name === "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level style.zoom = 1; // Set the alpha filter to set the opacity var opacity = parseInt( value, 10 ) + "" === "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"; var filter = style.filter || jQuery.curCSS( elem, "filter" ) || ""; style.filter = ralpha.test(filter) ? filter.replace(ralpha, opacity) : opacity; } return style.filter && style.filter.indexOf("opacity=") >= 0 ? (parseFloat( ropacity.exec(style.filter)[1] ) / 100) + "": ""; } You can see here that the style is explicitly set in code rather than relying on $.css() to assign the value resulting in the old filter getting wiped out. jQuery 1.32 looks a little different: // IE uses filters for opacity if ( !jQuery.support.opacity && name == "opacity" ) { if ( set ) { // IE has trouble with opacity if it does not have layout // Force it by setting the zoom level elem.zoom = 1; // Set the alpha filter to set the opacity elem.filter = (elem.filter || "").replace( /alpha\([^)]*\)/, "" ) + (parseInt( value ) + '' == "NaN" ? "" : "alpha(opacity=" + value * 100 + ")"); } return elem.filter && elem.filter.indexOf("opacity=") >= 0 ? (parseFloat( elem.filter.match(/opacity=([^)]*)/)[1] ) / 100) + '': ""; } Offhand I’m not sure why the latter works better since it too is assigning the filter. However, when checking with the IE script debugger I can see that there are actually a couple of filter tags assigned when using jQuery 1.32 but only one when I use jQuery 1.4. Note also that the jQuery 1.3 compatibility plugin for jQUery 1.4 doesn’t address this issue either. Resources ww.jquery.js (shadow plug-in $.fn.shadow) © Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery  

    Read the article

  • It’s nice to be important, but it’s more important to be nice

    - by BuckWoody
    I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge.   (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot)   I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea!  No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example.   Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement.   Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.”   Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you.   The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.”   The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person.   Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way.   OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Trace File Source Adapter

    The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

    Read the article

  • SSAS Compare: an intern’s journey

    - by Red Gate Software BI Tools Team
    About a month ago, David mentioned an intern working in the BI Tools Team. That intern happens to be me! In five weeks’ time, I’ll start my second year of Computer Science at the University of Cambridge and be a full-time student again, but for the past eight weeks, I’ve been living a completely different life. As Jon mentioned before, the teams here at Red Gate are small and everyone (including the interns!) is responsible for the product as a whole. I’ve attended planning sessions, UX tests, daily meetings, and everything else a full-time member of the team would; I had as much say in where we would go next with the product as anyone; I was able to see that what I was doing was an important part of the product from the feedback we got in the UX tests. All these things almost made me forget that this is just an internship and not my full-time job. First steps at Red Gate Being based in Cambridge, Red Gate has many Cambridge university graduates working for them. They also hire some Cambridge undergraduates for internships each summer. With its popularity with university graduates and its great working environment, Red Gate has managed to build up a great reputation. When I thought of doing an internship here in Cambridge, Red Gate just seemed to be the obvious choice for my first real work experience. On my first day at Red Gate, David, the lead developer for SSAS Compare, helped me settle in and explained what I’d be doing. My task was to improve the user experience of displaying differences between MDX scripts by syntax highlighting, script formatting, and improving the difference identification in the first place. David suggested how I should approach the problem, but left all the details and design decisions to me. That was when I realised how much independence and responsibility I’d have. What I’ve done If you launch the latest version of SSAS Compare and drill down to an MDX script difference, you can see the changes that have been made. In earlier versions, you could only see the scripts in plain text on both sides — either in black or grey, depending on whether they were the same or not. However, you couldn’t see exactly where the scripts were different, which was especially annoying when the two scripts were large – as they often are. Furthermore, if parts of the two scripts were formatted differently, they seemed to be different but were actually the same, which caused even more confusion and made it difficult to see where the differences were. All these issues have been fixed now. The two scripts are automatically formatted by the tool so that if two things are syntactically equivalent, they look the same – including case differences in keywords! The actual difference is highlighted in grey, which makes them easy to spot. The difference identification has been improved as well, so two scripts aren’t identified as different if there’s just a difference in meaningless whitespace characters, or when you have “select” on one side and “SELECT” on the other. We also have syntax highlighting, which makes it easier to read the scripts. How I did it In order to do the formatting properly, we decided to parse the MDX scripts. After some investigation into parser builders, I decided to go with the GOLD Parser builder and the bsn-goldparser .NET engine. GOLD Parser builder provides a fairly nice GUI to write, build, and test grammar in. We also liked the idea of separating the grammar building from parsing a text. The bsn-goldparser is one of many .NET engines for GOLD, and although it doesn’t support the newest features of GOLD Parser, it has “the ability to map semantic action classes to terminals or reduction rules, so that a completely functional semantic AST can be created directly without intermediate token AST representation, and without the need for glue code.” That makes it much easier for us to change the implementation in our program when we change the grammar. As bsn-goldparser is open source, and I wanted some more features in it, I contributed two new features which have now been merged to the project. Unfortunately, there wasn’t an MDX grammar written for GOLD already, so I had to write it myself. I was referencing MSDN to get the formal grammar specification, but the specification was all over the place, so it wasn’t that easy to implement and find. We’re aware that we don’t yet fully support all valid MDX, so sometimes you’ll just see the MDX script difference displayed the old way. In that case, there is some grammar construct we don’t yet recognise. If you come across something SSAS Compare doesn’t recognise, we’d love to hear about it so we can add it to our grammar. When some MDX script gets parsed, a tree is produced. That tree can then be processed into a list of inlines which deal with the correct formatting and can be outputted to the screen. Doing all this has led me to many new technologies and projects I haven’t worked with before. This was my first experience with C# and Visual Studio, although I have done things in Java before. I have learnt how to unit test with NUnit, how to do dependency injection with Ninject, how to source-control code with SVN and Mercurial, how to build with TeamCity, how to use GOLD, and many other things. What’s coming next Sadly, my internship comes to an end this week, so there will be less development on MDX difference view for a while. But the team is going to work on marking the differences better and making it consistent with difference indication in the top part of comparison window, and will keep adding support for more MDX grammar so you can see the differences easily in every comparison you make. So long! And maybe I’ll see you next summer!

    Read the article

  • Authorize.Net, Silent Posts, and URL Rewriting Don't Mix

    The too long, didn't read synopsis: If you use Authorize.Net and its silent post feature and it stops working, make sure that if your website uses URL rewriting to strip or add a www to the domain name that the URL you specify for the silent post matches the URL rewriting rule because Authorize.Net's silent post feature won't resubmit the post request to URL specified via the redirect response. I have a client that uses Authorize.Net to manage and bill customers. Like many payment gateways, Authorize.Net supports recurring payments. For example, a website may charge members a monthly fee to access their services. With Authorize.Net you can provide the billing amount and schedule and at each interval Authorize.Net will automatically charge the customer's credit card and deposit the funds to your account. You may want to do something whenever Authorize.Net performs a recurring payment. For instance, if the recurring payment charge was a success you would extend the customer's service; if the transaction was denied then you would cancel their service (or whatever). To accomodate this, Authorize.Net offers a silent post feature. Properly configured, Authorize.Net will send an HTTP request that contains details of the recurring payment transaction to a URL that you specify. This URL could be an ASP.NET page on your server that then parses the data from Authorize.Net and updates the specified customer's account accordingly. (Of course, you can always view the history of recurring payments through the reporting interface on Authorize.Net's website; the silent post feature gives you a way to programmatically respond to a recurring payment.) Recently, this client of mine that uses Authorize.Net informed me that several paying customers were telling him that their access to the site had been cut off even though their credit cards had been recently billed. Looking through our logs, I noticed that we had not shown any recurring payment log activity for over a month. I figured one of two things must be going on: either Authorize.Net wasn't sending us the silent post requests anymore or the page that was processing them wasn't doing so correctly. I started by verifying that our Authorize.Net account was properly setup to use the silent post feature and that it was pointing to the correct URL. Authorize.Net's site indicated the silent post was configured and that recurring payment transaction details were being sent to http://example.com/AuthorizeNetProcessingPage.aspx. Next, I wanted to determine what information was getting sent to that URL.The application was setup tolog the parsed results of the Authorize.Net request, such as what customer the recurring payment applied to; however,we were not logging the actual HTTP request coming from Authorize.Net. I contacted Authorize.Net's support to inquire if they logged the HTTP request send via the silent post feature and was told that they did not. I decided to add a bit of code to log the incoming HTTP request, which you can do by using the Request object's SaveAs method. This allowed me to saveevery incoming HTTP request to the silent post page to a text file on the server. Upon the next recurring payment, I was able to see the HTTP request being received by the page: GET /AuthorizeNetProcessingPage.aspx HTTP/1.1Connection: CloseAccept: */*Host: www.example.com That was it. Two things alarmed me: first, the request was obviously a GET and not a POST; second, there was no POST body (obviously), which is where Authorize.Net passes along thedetails of the recurring payment transaction.What stuck out was the Host header, which differed slightly from the silent post URL configured in Authorize.Net. Specifically, the Host header in the above logged request pointed to www.example.com, whereas the Authorize.Net configuration used example.com (no www). About a month ago - the same time these recurring payment transaction detailswere no longer being processed by our ASP.NET page - we had implemented IIS 7's URL rewriting feature to permanently redirect all traffic to example.com to www.example.com. Could that be the problem? I contacted Authorize.Net's support again and asked them if their silent post algorithmwould follow the301HTTP response and repost the recurring payment transaction details. They said, Yes, the silent post would follow redirects. Their reports didn't jive with my observations, so I went ahead and updated our Authorize.Net configuration to point to http://www.example.com/AuthorizeNetProcessingPage.aspx instead of http://example.com/AuthorizeNetProcessingPage.aspx. And, I'm happy to report, recurring payments and correctly being processed again! If you use Authorize.Net and the silent post feature, and you notice that your processing page is not longer working, make sure you are not using any URL rewriting rules that may conflict with the silent post URL configuration. Hope this saves someone the time it took me to get to the bottom of this. Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • SQL SERVER – Service Broker and CAP_CPU_PERCENT – Limiting SQL Server Instances to CPU Usage

    - by pinaldave
    I have mentioned several times on this blog that the best part of blogging is the questions I receive from readers. They are often very interesting. The questions from readers give me a good idea what other readers might be thinking as well. After reading my earlier article Simple Example to Configure Resource Governor – Introduction to Resource Governor – I received an email from a reader and we exchanged a few emails. After exchanging emails we both figured out what is going on. It was indeed interesting and reader suggested to that I should blog about it.  I asked for permission to publish his name but he does not like the attention so we will just call him Jeff. I have converted our emails into chat for easy consumption. Jeff: Your script does not work at all. I think either there is a bug in SQL Server. Pinal: Would you please explain in detail? Jeff: Your code does not limit the CPU usage? Pinal: How did you measure it? Jeff: Well, we have third party tools for it but let us say I have limited the resources for Reporting Services and used your script described in your blog. After that I ran only reporting service workload the CPU is still used more than 100% and it is not limited to 30% as described in your script. Clearly something is wrong somewhere. Pinal: Did you say you ONLY ran reporting server load? Jeff: Yeah, to validate I ran ONLY reporting server load and CPU did not throttle at 30% as per your script. Pinal: Oh! I get it here is the answer - CAP_CPU_PERCENT = 30. Use it. Jeff: What is that, I think your earlier script says it will throttle the Reporting Service workload and Application/OLTP workload and balance it. Pinal: Exactly, that is correct. Jeff: You need to write more in email buddy! Just like your blogs, your answers do not make sense! No Offense! Pinal: Hmm…feedback well taken. Let me try again. In SQL Server 2012 there are a few enhancements with regards to SQL Server Resource Governor. One of the enhancement is how the resources are allocated. Let me explain you with examples. Configuration: [Read Earlier Post] Reporting Workload: MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30 Application/OLTP Workload: MIN_CPU_PERCENT=50, MAX_CPU_PERCENT=100 Example 1: If there is only Reporting Workload on the server: SQL Server will not limit usage of CPU to only 30% workload but SQL Server instance will use all available CPU (if needed). In another word in this scenario it will use more than 30% CPU. Example 2: If there is Reproting Workload and heavy Application/OLTP workload: SQL Server will allocate a maximum of 30% CPU resources to Reporting Workload and allocate remaining resources to heavy application/OLTP workload. The reason for this enhancement is for better utilization of the resources. Let us think, if there is only single workload, which we have limited to max CPU usage to 30%. The other unused available CPU resources is now wasted. In this situation SQL Server allows the workload to use more than 30% resources leading to overall improved/optimized performance. However, in the case of multiple workload where lots of resources are needed the limits specified in MAX_CPU_PERCENT are acknowledged. Example 3: If there is a situation where the max CPU workload has to be enforced: This is a very interesting scenario, in the case when the max CPU workload has to be enforced irrespective of the workload and enhanced algorithm, the keyword CAP_CPU_PERCENT is essential. It specifies a hard cap on the CPU bandwidth that all requests in the resource pool will receive. It will never let CPU usage for reporting workload to go over 30% in our case. You can use the key word as follows: -- Creating Resource Pool for Report Server CREATE RESOURCE POOL ReportServerPool WITH ( MIN_CPU_PERCENT=0, MAX_CPU_PERCENT=30, CAP_CPU_PERCENT=40, MIN_MEMORY_PERCENT=0, MAX_MEMORY_PERCENT=30) GO Notice that there is MAX_CPU_PERCENT=30 and CAP_CPU_PERCENT=40, what it means is that when SQL Server Instance is under heavy load under different workload it will use the maximum CPU at 30%. However, when the SQL Server instance is not under workload it will go over the 30% limit. However, as CAP_CPU_PERCENT is set to 40, it will not go over 40% in any case by limiting the usage of CPU. CAP_CPU_PERCENT puts a hard limit on the resources usage by workload. Jeff: Nice Pinal, you should blog about it. [A day passes by] Pinal: Jeff, it is done! Click here to read it. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Service Broker

    Read the article

  • It’s nice to be important, but it’s more important to be nice

    - by BuckWoody
    I’ve been a little “preachy” lately, telling you that you should let people finish their sentences, and always check a problem out before you tell a user that their issue is “impossible”. Well, I’ll round that out with one more tip today. Keep in mind that all of these things are actions I’ve been guilty of, hopefully in the past. I’m kind of a “work in progress”. And yes, I know these tips are coming from someone who picks on people in presentations, but that is of course done in fun, and (hopefully) with the audience’s knowledge.   (No, this isn’t aimed at any one person or event in particular – I just see it happen a lot)   I’ve seen, unfortunately over and over, someone in authority react badly to someone who is incorrect, or at least perceived to be incorrect. This might manifest itself in a comment, post, question or whatever, but the point is that I’ve seen really intelligent people literally attack someone they view as getting something wrong. Don’t misunderstand me; if someone posts that you should always drop a production database in the middle of the day I think you should certainly speak up and mention that this might be a bad idea!  No, I’m talking about generalizations or even incorrect statements done in good faith. Let me explain with an example.   Suppose someone makes the statement: “If you don’t have enough space on your system, you can just use a DBCC command to shrink the database”. Let’s take two responses to this statement.   Response One: “That’s insane. Everyone knows that shrinking a database is a stupid idea, you’re just going to fragment your indexes all over the place.” Response Two: “That’s an interesting take – in my experience and from what I’ve read here (someurl.com) I think this might not be a universal best practice.”   Of course, both responses let the person making the statement and those reading it know that you don’t agree, and that it’s probably wrong. But the person you responded to and the general audience hearing you (or reading your response) might form two different opinions of you.   The first response says to me “this person really needs to be right, and takes arguments personally. They aren’t thinking of the other person at all, or the folks reading or hearing the exchange. They turned an incorrect technical statement into a personal attack. They haven’t left the other party any room to ‘save face’, and they have potentially turned what could be a positive learning experience for everyone into a negative. Also, they sound more than just a little arrogant.”   The second response says to me “this person has left room for everyone to save face, has presented evidence to the contrary and is thinking about moving the ball forward and getting it right rather than attacking someone for getting it wrong.” It’s the idea of questioning a statement rather than attacking a person.   Perhaps you have a different take. Maybe you think the “direct” approach is best – and maybe that’s worked for you. Something to consider is what you’ve really accomplished while using that first method. Sure, the info you provide is correct, and perhaps someone out there won’t shrink a database because of your response – but perhaps you’ve turned a lot more people off, and now they won’t listen to your other valuable information. You’ll be an expert, but another one of the nameless, arrogant jerks in technology. And I don’t think anyone likes to be thought of that way.   OK, I’ll get down off of the high-horse now. And I’ll keep the title of this entry (said to me by my grandmother when I was a little kid) in mind when I dismount. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • How to Sync Specific Folders With Dropbox

    - by Matthew Guay
    Would you like to sync specific folders with Dropbox instead of automatically syncing all of your folders to all of your computers?  Here’s how using Selective Sync available in the latest Beta version of Dropbox. Dropbox is a great tool for keeping your important files synced between your computers, and we have covered many interesting things you can do with your Dropbox account.  But until now, there was no way to only sync certain folders with each computer; it was all or nothing.  This could be frustrating if you wanted to store large files from one computer but didn’t want them on a computer with a smaller hard drive.  The latest Beta version of Dropbox allows you to selectively choose which folders to sync between computers. Please Note: This feature is currently only available in the 0.8 beta version of Dropbox. Setup the new Beta Download the new beta version of Dropbox 0.8 (link below); choose the correct download for your system.  Run the installer as normal. It only took a couple seconds to install, though it made the taskbar disappear briefly at the end of the installation on our tests.  Strangely, the installer doesn’t let you know it’s finished installing; if you already had a previous version of Dropbox installed, it will simply start working from your system tray as before.  If this is a new installation of Dropbox, you will be asked to enter your Dropbox account info or create a new account.   Selectively Sync Folders By default, Dropbox will still sync all of your Dropbox folders to all of your computers.  Once this beta is installed, you can choose individual folders or subfolders you don’t want to sync.  Right-click the Dropbox icon in your system tray and select Preferences. Click the Advanced tab on the top, and then click the new Selective Sync button. Now uncheck any folders you don’t want to sync to this computer.  These folders will still exist on your other machines and in the Dropbox web interface, but they will not be downloaded to this computer. The default view only shows your top-level folders in your Dropbox account.  If you wish to sync certain folders but exclude their subfolders, click the Switch to Advanced View button.   Expand any folder and uncheck any subfolders you don’t want to sync.  Notice that the parent folder’s check box is filled now, showing that it is partially synced. Click OK when you’ve made the changes you want.  Dropbox will then make sure you know these folders will stop syncing to this computer; click OK again if you’re sure you don’t want to sync these folders.   Dropbox will cleanup your folder and remove the files and folders you don’t want synced.   Next time you open your Dropbox folder, you’ll notice that the folders we unchecked are no longer in this computer’s Dropbox folder.  They are still in our Dropbox online account, and on any other computers we’re syncing with. If you add a new folder with the same name as a folder you stopped syncing, you’ll notice a grey minus icon over the folder.  This folder will not sync with your other computers or your online Dropbox account. If you want to add these folders back to this computer’s Dropbox, just repeat the steps, this time checking the folders you want to sync.  If you have any folders that were not syncing before, their names will have (Selective Sync Conflict) added to the end, and will sync with all of your computers. Conclusion We’re excited that we can now choose exactly which folders we want synced on each computer.  Since everything is still synced with the online Dropbox, we can still access any of the folders from anywhere.  This makes your Dropbox much more versatile, and can help you keep the folders synced exactly the way you want. Links Download the new Dropbox 0.8.64 beta Signup for Dropbox Similar Articles Productive Geek Tips Add "My Dropbox" to Your Windows 7 Start MenuSync Your Pidgin Profile Across Multiple PCs with DropboxUser Guide to Dropbox Shared FoldersUse Any Folder For Your Ubuntu Desktop (Even a Dropbox Folder)Shut Down or Reboot a Solaris System TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • Why can't I change the AU_AU locale to en_US?

    - by sachin
    /bin/bash: warning: setlocale: LC_ALL: cannot change locale ( (unset)) Generating locales... en_US.ISO-8859-1... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done Generation complete. ganesha@ubuntu:~$ sudo update_locale LANG=en_US sudo: update_locale: command not found ganesha@ubuntu:~$ sudo update-locale LANG=en_US perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_PAPER = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_TIME = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). ganesha@ubuntu:~$ sudo update-locale LANG=en_US.UTF8 perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_PAPER = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_TIME = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). ganesha@ubuntu:~$ gedit ~/.profile (process:6467): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. ganesha@ubuntu:~$ sudo update-locale LANG=en_US.UTF8 perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_PAPER = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_TIME = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). ganesha@ubuntu:~$ sudo apt-get install --reinstall locales Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded. Need to get 0 B/3359 kB of archives. After this operation, 0 B of additional disk space will be used. perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = "en_US:en", LC_ALL = " (unset)", LC_TIME = "AU_AU.UTF-8", LC_MONETARY = "AU_AU.UTF-8", LC_CTYPE = "AU_AU.UTF-8", LC_COLLATE = "AU_AU.UTF-8", LC_ADDRESS = "AU_AU.UTF-8", LC_TELEPHONE = "AU_AU.UTF-8", LC_MESSAGES = "AU_AU.UTF-8", LC_NAME = "AU_AU.UTF-8", LC_MEASUREMAUT = "AU_AU.UTF-8", LC_IDAUTIFICATION = "AU_AU.UTF-8", LC_NUMERIC = "AU_AU.UTF-8", LC_PAPER = "AU_AU.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). (Reading database ... 157848 files and directories currently installed.) Preparing to replace locales 2.13+git20120306-3 (using .../locales_2.13+git20120306-3_all.deb) ... Unpacking replacement locales ... Processing triggers for man-db ... Setting up locales (2.13+git20120306-3) ... /bin/bash: warning: setlocale: LC_ALL: cannot change locale ( (unset)) Generating locales... en_AG.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_AU.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_BW.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_CA.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_DK.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_GB.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_HK.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_IE.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_IN.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_NG.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_NZ.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_PH.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_SG.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_US.ISO-8859-1... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_US.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_ZA.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_ZM.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done en_ZW.UTF-8... /usr/sbin/locale-gen: line 177: warning: setlocale: LC_ALL: cannot change locale ( (unset)) done Generation complete. ganesha@ubuntu:~$ How to correct this?

    Read the article

< Previous Page | 628 629 630 631 632 633 634 635 636 637 638 639  | Next Page >