Search Results

Search found 18422 results on 737 pages for 'down town'.

Page 633/737 | < Previous Page | 629 630 631 632 633 634 635 636 637 638 639 640  | Next Page >

• &lsquo;Publish&hellip;&rsquo; Resulting in Directory With No Files

  - by ToStringTheory

  I was pulling my hair out with this one…  Which isn’t good considering I have so little of it left!  I had just upgraded to the Windows Azure 1.7 SDK the day before with no problems, and used the upgraded ‘Publish…’ dialog to successfully publish a website to my hard disk for hosting on an internal development server.  However, when trying to deploy another project to my file system, it said it was successful, but there were no files in the directory.  The only difference, the first project was an Azure project, the second was a standard ASP.Net Web Application.  If you installed the Windows Azure 1.7 SDK, you may want to read this. The Problem At first it appears that there is no problem: However you may remember that when publishing a web application, the output window will generally iterate through each of the directories as it copies the files from that directory over.  Sure enough, when looking at the output directory – there are no files, no bin directory, no nothing… Troubleshooting Since one site published and the other did not, I believed that the failure may have been to a failed SQL Server 2012 installation that happened between publish.  I rolled back the installation, however that did not work either.  I also checked the Configuration Manager dialog, and ensured that the projects were selected to actually build (just checking, even though the output said it built them..)  I checked the properties of the solution and the projects, and a selection of files in the project to make sure that they were selected for content…  Nothing seemed to work. I then decided to uninstall the Azure 1.7 SDK to see if that was the culprit.  When I opened the Windows 7 ‘Uninstall a Program’ dialog, I noticed that the Azure SDK came with 2 extra packages that just so happen to be in a Release Candidate state from Microsoft – ‘Microsoft Web Deploy 3.0’ and ‘Microsoft Web Publish – Visual Studio 2010’.  It dawned on me that the publish dialog must not be just for Azure, since it appeared when I tried to deploy the regular web application as well.  Therefore, it must have been an upgrade to the publish mechanism in Visual Studio.  I uninstalled both of the programs and received my old publish dialog once again, and was able to successfully publish the solution above as I had done before. After celebrating solving the problem, I tried reinstalling the Azure package, to see if it would repair the publishing process. Even though it brought back the updated dialogs, it did not publish any files. Instead of uninstalling and retreating, I now KNEW what the cause was, and these were packages not just for Azure. I now knew a product name to search for. The Solution Sure enough, with the correct search term in Google – ‘microsoft web publish no files’, and setting the timeline to 1 week, I found what I needed - Microsoft Connect - Publish Web Application FAILS! (by Andrew Rits). I am surprised that I missed something that ended up being so simple…  In the Configuration Manager, I had the following settings: This is how I had been building and debugging the solution always…  However, apparently when installing the new Web Publishing package, it does things a little differently in its configuration for publishing: You see the difference?  The configuration here is set to ‘x86’ instead of ‘Any CPU’.  Sure enough, as soon as I switched the configuration to ‘Release – Any CPU’, the deployment built and published all of my files as I expected. Conclusion It was a small change, but apparently the new ‘Publish web application’ defaults to the x86 configuration, thereby not copying any of the project/bin files to the publish target directory.  I spent forever trying things, but this small drop down eluded me until I was able to target that the dialog was actually working apparently, I just didn’t have the correct configuration. I hope that this saves you the hours of frustration and hastened hair loss that it caused me…  I also hope that before Microsoft brings this publishing package out of RC status, that they change the behavior of that menu to default to the settings of the old publish menu for the first time. Happy Coding!

  Read the article

• Silverlight Cream for March 21, 2010 -- #816

  - by Dave Campbell

  In this Issue: Michael Washington, John Papa(-2-, -3-, -4-), Jonas Follesø, David Anson, Scott Guthrie, Andrej Tozon, Bill Reiss(-2-), Pete Blois, and Lee. Shoutouts: Frank LaVigne has a Mix10 Session Downloader for us all to use... thanks Frank! Read what Ward Bell has to say about MVVM, Josh Smith’s Way ... it's all good. Robby Ingebretsen posts on his 10 Favorite Open Source Fonts You Can Embed in WPF or Silverlight Mike Harsh posted Slides and Demos from my MIX10 Session . The download link at Drop.io is down for maintenance until Sunday evening, March 21. From SilverlightCream.com: Blend 4: TreeView SelectedItemChanged using MVVM Michael Washington has a post up about doing SelectedItemChanged on a TreeView with MVVM, oh and he's starting out in Blend 4... Silverlight TV 14: Developing for Windows Phone 7 with Silverlight John Papa hit Silverlight TV pretty hard at the beginning of MIX10. This first one is with Mike Harsh talking about WP7. (Hi Mike ... wondered where you'd run off to!), and you can go to the shoutout section to get Mike's session material from MIX as well. Silverlight TV 15: Announcing Silverlight 4 RC at MIX 10 In this next Silverlight TV(15), John Papa and Adam Kinney discuss Silverlight 4RC ... thank goodness it's out, we can all let go of the breath we've been holding in :) Silverlight TV 16: Tim Heuer and Jesse Liberty Talk about Silverlight 4 RC at MIX 10 Silverlight TV 16 has John Papa sharing the spotlight with Jesse Liberty and Tim Heuer ... geez... can you find 3 more kowledgable Silverlight folks to listen to? No? then go listen to this :) Silverlight TV 17: Build a Twitter Client for Windows Phone 7 with Silverlight The latest Silverlight TV has John Papa bringing Mike Harsh back to produce a Twitter Client for WP7. Simulating multitouch on the Windows Phone 7 Emulator Jonas Follesø has a great post up about simulating multi-touch on WP7 using multiple mice ... yeah, you read that right :) Using IValueConverter to create a grouped list of items simply and flexibly David Anson demonstrates grouping items in a ListBox using IValueConverter. I think I can pretty well guarantee I would NOT have thought of doing this.. :) Building a Windows Phone 7 Twitter Application using Silverlight In the MIX10 first-day keynote, Scott Guthrie did File->New Project and built a WP7 Twitter app. He has that up as a tutorial with all sorts of external links including one to the keynote itself. Named and optional parameters in Silverlight 4 Andrej Tozon delves into the optional parameters that are now available to Silverlight developers... pretty cool stuff. Space Rocks game step 4: Inheriting from Sprite Bill Reiss continues with his game development series with this one on inheriting from the Sprite class and centering objects Space Rocks game step 5: Rotating the ship Bill Reiss's episode 5 is on rotating the ship you setup in episode 4. Don't worry about the transforms, Bill gives it all to us :) Labyrinth Sample for Windows Phone Wow... check out the sample Pete Blois did for the Phone... Silverlight coolness :) PathListBox in SL4 – firstlook Lee has a post up on the PathListBox. I think this is going to catch on quick... it's just too cool not to! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Getting Started with Chart control in ASP.Net 4.0

  - by sreejukg

  In this article I am going to demonstrate the Chart control available in ASP.Net 4 and Visual Studio 2010. Most of the web applications need to generate reports for business users. The business users are happy to view the results in a graphical format more that seeing it in numbers. For the purpose of this demonstration, I have created a sales table. I am going to create charts from this sale data. The sale table looks as follows I have created an ASP.Net web application project in Visual Studio 2010. I have a default.aspx page that I am going to use for the demonstration. First I am going to add a chart control to the page. Visual Studio 2010 has a chart control. The Chart Control comes under the Data Tab in the toolbox. Drag and drop the Chart control to the default.aspx page. Visual Studio adds the below markup to the page. <asp:Chart ID="Chart1" runat="server"></asp:Chart> In the designer view, the Chart controls gives the following output. As you can see this is exactly similar to other server controls in ASP.Net, and similar to other controls under the data tab, Chart control is also a data bound control. So I am going to bind this with my sales data. From the design view, right click the chart control and select “show smart tag” Here you need so choose the Data source property and the chart type. From the choose data source drop down, select new data source. In the data source configuration wizard, select the SQL data base and write the query to retrieve the data. At first I am going to show the chart for amount of sales done by each sales person. I am going to use the following query inside sqldatasource select command. “SELECT SUM(SaleAmount) AS Expr1, salesperson FROM SalesData GROUP BY SalesPerson” This query will give me the amount of sales achieved by each sales person. The mark up of SQLDataSource is as follows. <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:SampleConnectionString %>" SelectCommand="SELECT SUM(SaleAmount) as amount, SalesPerson FROM SalesData GROUP BY SalesPerson"></asp:SqlDataSource> Once you selected the data source for the chart control, you need to select the X and Y values for the columns. I have entered salesperson in the X Value member and amount in the Y value member. After modifications, the Chart control looks as follows Click F5 to run the application. The output of the page is as follows. Using ASP.Net it is much easier to represent your data in graphical format. To show this chart, I didn’t even write any single line of code. The chart control is a great tool that helps the developer to show the business intelligence in their applications without using third party products. I will write another blog that explore further possibilities that shows more reports by using the same sales data. If you want to get the Project in zipped format, post your email below.

  Read the article

• The dislikes of TDD

  - by andrewstopford

  I enjoy debates about TDD and Brian Harrys blog post is no exception. Brian sounds out what he likes and dislikes about TDD and it's the dislikes I'll focus on. The idea of having unit tests that cover virtually every line of code that I’ve written that I have to refactor every time I refactor my code makes me shudder.  Doing this way makes me take nearly twice as long as it would otherwise take and I don’t feel like I get sufficient benefits from it. Refactoring your tests to match your refactored code sounds like the tests are suffering. Too many hard dependencies with no SOLID concerns are a sure fire reason you would do this. Maybe at the start of a TDD cycle you would need to do this as your design evolves and you remove these dependencies but this should quickly be resolved as you refactor. If you find your self still doing it then stop and look back at your design. Don’t get me wrong, I’m a big fan of unit tests.  I just prefer to write them after the code has stopped shaking a bit.  In fact most of my early testing is “manual”.  Either I write a small UI on top of my service that allows me to plug in values and try it or write some quick API tests that I throw away as soon as I have validated them. The problem with this is that a UI can make assumptions on your code that then just unit test around and very quickly the design becomes bad and you technical debt sweeps in. If you want to blackbox test your code with a UI then do so after your TDD cycles not before. This is probably by biggest issue with a literal TDD interpretation.  TDD says you never write a line of code without a failing test to show you need it.  I find it leads developers down a dangerous path.  Without any help from a methodology, I have met way too many developers in my life that “back into a solution”.  By this, I mean they write something, it mostly works and they discover a new requirement so they tack it on, and another and another and when they are done, they’ve got a monstrosity of special cases each designed to handle one specific scenario.  There’s way more code than there should be and it’s way too complicated to understand. I believe in finding general solutions to problems from which all the special cases naturally derive rather than building a solution of special cases.  In my mind, to do this, you have to start by conceptualizing and coding the framework of the general algorithm.  For me, that’s a relatively monolithic exercise. TDD is an development pratice not a methodology, the danger is that the solution becomes a mass of different things that violate DRY. TDD won't solve these problems, only good communication and practices like pairing will help. Above all else an assumption that TDD replaces a methodology is a mistake, combine it with what ever works for your team\business but only good communication will help. A good naming scheme\structure for folders, files and tests can help you and your team isolate what tests are for what.

  Read the article

• Amazon Product Advertising API SOAP Namespace Changes

  - by Rick Strahl

  About two months ago (twowards the end of February 2012 I think) Amazon decided to change the namespace of the Product Advertising API. The error that would come up was: <ItemSearchResponse > was not expected. If you've used the Amazon Product Advertising API you probably know that Amazon has made it a habit to break the services every few years or so and I guess last month was about the time for another one. Basically the service namespace of the document has been changed and responses from the service just failed outright even though the rest of the schema looks fine. Now I looked around for a while trying to find a recent update to the Product Advertising API - something semi-official looking but everything is dated around 2009. Really??? And it's not just .NET - the newest thing on the sample/APIs is dated early 2011 and a handful of 2010 samples. There are newer full APIs for the 'cloud' offerings, but the Product Advertising API apparently isn't part of that. After searching for quite a bit trying to trace this down myself and trying some of the newer samples (which also failed) I found an obscure forum post that describes the solution of getting past the namespace issue. FWIW, I've been using an old version of the Product Advertising API using the old Microsoft WSE3 services (pre-WCF), which provides some of the WS* security features required by the Amazon service. The fix for this code is to explicitly override the namespace declaration on each of the imported service method signatures. The old service namespace (at least on my build) was: http://webservices.amazon.com/AWSECommerceService/2009-03-31 and it should be changed to: http://webservices.amazon.com/AWSECommerceService/2011-08-01 Change it on the class header:[Microsoft.Web.Services3.Messaging.SoapService("http://webservices.amazon.com/AWSECommerceService/2011-08-01")] [System.Xml.Serialization.XmlIncludeAttribute(typeof(Property[]))] [System.Xml.Serialization.XmlIncludeAttribute(typeof(BrowseNode[]))] [System.Xml.Serialization.XmlIncludeAttribute(typeof(TransactionItem[]))] public partial class AWSECommerceService : Microsoft.Web.Services3.Messaging.SoapClient { and on all method signatures:[Microsoft.Web.Services3.Messaging.SoapMethodAttribute("http://soap.amazon.com/ItemSearch")] [return: System.Xml.Serialization.XmlElementAttribute("ItemSearchResponse", Namespace="http://webservices.amazon.com/AWSECommerceService/2011-08-01")] public ItemSearchResponse ItemSearch(ItemSearch ItemSearch1) { Microsoft.Web.Services3.SoapEnvelope results = base.SendRequestResponse("ItemSearch", ItemSearch1); return ((ItemSearchResponse)(results.GetBodyObject(typeof(ItemSearchResponse), this.SoapServiceAttribute.TargetNamespace))); } It's easy to do with a Search and Replace on the above strings. Amazon Services <rant> FWIW, I've not been impressed by Amazon's service offerings. While the services work well, their documentation and tool support is absolutely horrendous. I was recently working with a customer on an old AWS application and their old API had been completely removed with a new API that wasn't even a close match. One old API call resulted in requiring three different APIs to perform the same functionality. We had to re-write the entire piece from scratch essentially. The documentation was downright wrong, and incomplete and so scattered it was next to impossible to follow. The examples weren't examples at all - they're mockups of real service calls with fake data that didn't even provide everything that was required to make same service calls work. Additionally there appears to be just about no public support from Amazon, only peer support which is sparse at best - and getting a hold of somebody at Amazon, even for pay seems to be mythical task. It's a terrible business model they have going. I can't see why anybody would put themselves through this sort of customer and development experience. Sad really, but an experience we see more and more these days. Nobody puts in the time to document anything anymore, leaving it to devs to figure this stuff out over and over again… </rant>© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  Web Services   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• SQL – Quick Start with Admin Sections of NuoDB – Manage NuoDB Database

  - by Pinal Dave

  In the yesterday’s blog post we have seen that it is extremely easy to install the NuoDB database on your local machine. Now that the application is properly set up, let us explore NuoDB a bit more and get you familiar with the how it works and what the important areas of the NuoDB are that you should learn. As we have already installed NuoDB, now we will quickly start with two of the important areas in NuoDB: 1) Admin and 2) Explorer. In this blog post I will explore how the Admin Section of the NuoDB Console works.  In the next blog post we will learn how the Explorer Section works. Let us go to the NuoDB Console by typing the following URL in your browser: http://localhost:8080/ It will bring you to the following screen: On this screen you can see a big Start QuickStart button. Click on the button and it will bring you to following screen. On this screen you will find very important information about Domain and Database Settings. It is our habit that we do not read what is written on the screen and keep on clicking on continue without reading. While we are familiar with most wizards, we can often miss the very important message on the screen. Please note the information of Domain Settings and Database Settings from the following screen before clicking on Create Database. Domain Settings User: quickstart Password: quickstart Database Settings User: dba Password: goalie Database: test Schema: HOCKEY Once you click on the Create Database button it will immediately start creating sample database. First, it will start a Storage Manager and right after that it will start a Transaction Engine. Once the engine is up, it will Create a Schema and Sample Data. On the success of the creating the sample database it will show the following screen. Now is the time where we can explore the NuoDB Admin or NuoDB Explorer. If you click on Admin, it will first show following login screen. Enter for the username “domain” and for the password “bird”. Alternatively you can enter “quickstart”  twice for username and password.  It works as too. Once you enter into the Admin Section, on the left side you can see information about NuoDB and Admin Console and on the right side you can see the domain overview area. From this Administrative section you can do any of the following tasks: Create a view of the entire domain Add and remove databases Start and stop NuoDB Transaction Engines and Storage Managers Monitor transaction across all the NuoDB databases On the right side of the Admin Section we can see various information about a particular NuoDB domain. You can quickly view various alerts, find out information about the number of host machines that are provisioned for the domain, and see the number of databases and processes that are running in the domain. If you click on the “1 host” link you will be able to see various processes, CPU usage and other information. In the Processes Section you can see that there are two different types of processes. The first process (where you can see the floppy drive icon) represents a running Storage Manager process and the second process a running Transaction Engine process. You can click on the links for the Storage Manager and Transaction Engine to see further statistical details right down to the last byte of the data. There are various charts available for analysis as well. I think the product is quite mature and the user can add different monitor charts to the Admin section. Additionally, the Admin section is the place where you can create and manage new databases. I hope today’s tutorial gives you enough confidence that you can try out NuoDB and checkout various administrative activities with the database. I am personally impressed with their dashboard related to various counters. For more information about how the NuoDB architecture works and what a Storage Manager or Transaction Engine does, check out this short video with NuoDB CTO Seth Proctor:  In the next blog post, we will try out the Explorer section of NuoDB, which allows us to run SQL queries and write SQL code.  Meanwhile, I strongly suggest you download and install NuoDB and get yourself familiar with the product. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

  Read the article

• SQLAuthority News – Android Efficiency Tips and Tricks – Personal Technology Tip #003

  - by pinaldave

  I use my phone for lots of things.  I use it mainly to replace my tablet – I can e-mail, take and edit photos, and do almost everything I can do on a laptop with this phone.  And I am sure that there are many of you out there just like me.  I personally have a Galaxy S3, which uses the Android operating system, and I have decided to feature it as the third installment of my Technology Tips and Tricks series. 1) Shortcut to your favorite contacts on home screen Access your most-called contacts easily from your home screen by holding your finger on any empty spot on the home screen.  A menu will pop up that allows you to choose Shortcuts, and Contact.  You can scroll through your contact list and then just tap on the name of the person you want to be able to dial with a single click. 2) Keep track of your data usage Yes, we all should keep a close eye on our data usage, because it is very easy to go over our limits and then end up with a giant bill at the end of the month.  Never get surprised when you open that mobile phone envelope again.  Go to Settings, then Data Usage, and you can find a quick rundown of your usage, how much data each app uses, and you can even set alarms to let you know when you are nearing the limits.   Better yet, you can set the phone to stop using data when it reaches a certain limit. 3) Bring back Good Grammar We often hear proclamations about the downfall of written language, and how texting abbreviations, misspellings, and lack of punctuation are the root of all evil.  Well, we can show all those doomsdayers that all is not lost by bringing punctuation back to texting.  Usually we leave it off when we text because it takes too long to get to the screen with all the punctuation options.  But now you can hold down the period (or “full stop”) button and a list of all the commonly-used punctuation marks will pop right up. 4) Apps, Apps, Apps and Apps And finally, I cannot end an article about smart phones without including a list of my favorite apps.  Here are a list of my Top 10 Applications on my Android (not counting social media apps). Advanced Task Killer – Keeps my phone snappy by closing un-necessary apps WhatsApp - my favorite alternate to Text SMS Flipboard - my ‘timepass’ moments Skype – keeps me close to friends and family GoogleMaps - I am never lost because of this one thing Amazon Kindle – Books my best friends DropBox - My data always safe Pluralsight Player – Learning never stops for me Samsung Kies Air – Connecting Phone to Computer Chrome – Replacing default browser I have not included any social media applications in the above list, but you can be sure that I am linked to Twitter, Facebook, Google+, LinkedIn, and YouTube. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Android, Personal Technology

  Read the article

• Inside Red Gate - Exercises in Leanness

  - by simonc

  There's a new movement rumbling around Red Gate Towers - the Lean Startup. At its core is the idea that you don't have to be in a company with single-digit employees to be an entrepreneur; you simply have to (being blunt) not know what you should be doing. Specifically, you accept that you don't know everything you need to know in order to create a useful, successful & profitable product. This is something that Red Gate has had problems with in the past; we've created products that weren't aimed at the correct market, or didn't solve the problem the user had (although they solved the problem we thought the users had, or the problem the users thought they had). As a result, these products weren't as successful as they could have been. The ideas at the core of the Lean Startup help to combat this tendency to build large, well-engineered products that solve the wrong problem. You need to actually test your hypotheses about what the users and the market needs, rather than just running a project based on those untested assumptions. Furthermore, these tests need to be done as fast as possible (on the order of a week) so that, if necessary, you can change the direction of the project without wasting effort going down a dead end. Over time, as more tests are done and more hypotheses are confirmed or refuted, the project moves towards something that solves users' actual problems. However, re-aligning the development teams that operate within Red Gate along these lines does itself have some issues; we've got very good at doing large, monolithic releases, with a feature set decided well in advance. Currently it takes about 2 weeks to do install & release testing before a release; this is clearly not practicable for a team doing weekly, or even daily releases. There's also many infrastructure issues to be solved; in our source control, build system, release mechanism, support pages & documentation, licensing system, update system, and download pages. All these need modifications to allow the fast releases necessary for each experiment. Not only do we have to change our infrastructure, we have to change our mindset. Doing daily releases means each release won't get nearly as much testing as 'standard' releases. As a team, we have to be prepared that there will be releases that have bugs and issues with them; not only do we have to be prepared to change direction with every experiment we do, but we have to be ready to fix any bugs that are reported very quickly as well. The SmartAssembly team is spearheading this move towards leanness within the company, using Feature Usage Reporting (FUR). We think this is a cracking feature that will really help developers learn how people use their products, but we need to confirm this hypothesis. So, over the next few weeks, we'll be running a variety of experiments on SmartAssembly to either confirm or refute our hypotheses concerning how people use SmartAssembly and apply FUR to their own products. In the rest of this series, I'll be documenting how the experiments we perform get on, and our experiences with applying the Lean Startup model to a mature product like SmartAssembly. Cross posted from Simple Talk.

  Read the article

• Inside Red Gate - Exercises in Leanness

  - by Simon Cooper

  There's a new movement rumbling around Red Gate Towers - the Lean Startup. At its core is the idea that you don't have to be in a company with single-digit employees to be an entrepreneur; you simply have to (being blunt) not know what you should be doing. Specifically, you accept that you don't know everything you need to know in order to create a useful, successful & profitable product. This is something that Red Gate has had problems with in the past; we've created products that weren't aimed at the correct market, or didn't solve the problem the user had (although they solved the problem we thought the users had, or the problem the users thought they had). As a result, these products weren't as successful as they could have been. The ideas at the core of the Lean Startup help to combat this tendency to build large, well-engineered products that solve the wrong problem. You need to actually test your hypotheses about what the users and the market needs, rather than just running a project based on those untested assumptions. Furthermore, these tests need to be done as fast as possible (on the order of a week) so that, if necessary, you can change the direction of the project without wasting effort going down a dead end. Over time, as more tests are done and more hypotheses are confirmed or refuted, the project moves towards something that solves users' actual problems. However, re-aligning the development teams that operate within Red Gate along these lines does itself have some issues; we've got very good at doing large, monolithic releases, with a feature set decided well in advance. Currently it takes about 2 weeks to do install & release testing before a release; this is clearly not practicable for a team doing weekly, or even daily releases. There's also many infrastructure issues to be solved; in our source control, build system, release mechanism, support pages & documentation, licensing system, update system, and download pages. All these need modifications to allow the fast releases necessary for each experiment. Not only do we have to change our infrastructure, we have to change our mindset. Doing daily releases means each release won't get nearly as much testing as 'standard' releases. As a team, we have to be prepared that there will be releases that have bugs and issues with them; not only do we have to be prepared to change direction with every experiment we do, but we have to be ready to fix any bugs that are reported very quickly as well. The SmartAssembly team is spearheading this move towards leanness within the company, using Feature Usage Reporting (FUR). We think this is a cracking feature that will really help developers learn how people use their products, but we need to confirm this hypothesis. So, over the next few weeks, we'll be running a variety of experiments on SmartAssembly to either confirm or refute our hypotheses concerning how people use SmartAssembly and apply FUR to their own products. In the rest of this series, I'll be documenting how the experiments we perform get on, and our experiences with applying the Lean Startup model to a mature product like SmartAssembly.

  Read the article

• More SQL Smells

  - by Nick Harrison

  Let's continue exploring some of the SQL Smells from Phil's list. He has been putting together. Datatype mis-matches in predicates that rely on implicit conversion.(Plamen Ratchev) This is a great example poking holes in the whole theory of "If it works it's not broken" Queries will this probably will generally work and give the correct response. In fact, without careful analysis, you probably may be completely oblivious that there is even a problem. This subtle little problem will needlessly complicate queries and slow them down regardless of the indexes applied. Consider this example: CREATE TABLE [dbo].[Page](     [PageId] [int] IDENTITY(1,1) NOT NULL,     [Title] [varchar](75) NOT NULL,     [Sequence] [int] NOT NULL,     [ThemeId] [int] NOT NULL,     [CustomCss] [text] NOT NULL,     [CustomScript] [text] NOT NULL,     [PageGroupId] [int] NOT NULL;  CREATE PROCEDURE PageSelectBySequence ( @sequenceMin smallint , @sequenceMax smallint ) AS BEGIN SELECT [PageId] , [Title] , [Sequence] , [ThemeId] , [CustomCss] , [CustomScript] , [PageGroupId] FROM [CMS].[dbo].[Page] WHERE Sequence BETWEEN @sequenceMin AND @SequenceMax END  Note that the Sequence column is defined as int while the sequence parameter is defined as a small int. The problem is that the database may have to do a lot of type conversions to evaluate the query. In some cases, this may even negate the indexes that you have in place. Using Correlated subqueries instead of a join   (Dave_Levy/ Plamen Ratchev) There are two main problems here. The first is a little subjective, since this is a non-standard way of expressing the query, it is harder to understand. The other problem is much more objective and potentially problematic. You are taking much of the control away from the optimizer. Written properly, such a query may well out perform a corresponding query written with traditional joins. More likely than not, performance will degrade. Whenever you assume that you know better than the optimizer, you will most likely be wrong. This is the fundmental problem with any hint. Consider a query like this:  SELECT Page.Title , Page.Sequence , Page.ThemeId , Page.CustomCss , Page.CustomScript , PageEffectParams.Name , PageEffectParams.Value , ( SELECT EffectName FROM dbo.Effect WHERE EffectId = dbo.PageEffects.EffectId ) AS EffectName FROM Page INNER JOIN PageEffect ON Page.PageId = PageEffects.PageId INNER JOIN PageEffectParam ON PageEffects.PageEffectId = PageEffectParams.PageEffectId  This can and should be written as:  SELECT Page.Title , Page.Sequence , Page.ThemeId , Page.CustomCss , Page.CustomScript , PageEffectParams.Name , PageEffectParams.Value , EffectName FROM Page INNER JOIN PageEffect ON Page.PageId = PageEffects.PageId INNER JOIN PageEffectParam ON PageEffects.PageEffectId = PageEffectParams.PageEffectId INNER JOIN dbo.Effect ON dbo.Effects.EffectId = dbo.PageEffects.EffectId  The correlated query may just as easily show up in the where clause. It's not a good idea in the select clause or the where clause. Few or No comments. This one is a bit more complicated and controversial. All comments are not created equal. Some comments are helpful and need to be included. Other comments are not necessary and may indicate a problem. I tend to follow the rule of thumb that comments that explain why are good. Comments that explain how are bad. Many people may be shocked to hear the idea of a bad comment, but hear me out. If a comment is needed to explain what is going on or how it works, the logic is too complex and needs to be simplified. Comments that explain why are good. Comments may explain why the sql is needed are good. Comments that explain where the sql is used are good. Comments that explain how tables are related should not be needed if the sql is well written. If they are needed, you need to consider reworking the sql or simplify your data model. Use of functions in a WHERE clause. (Anil Das) Calling a function in the where clause will often negate the indexing strategy. The function will be called for every record considered. This will often a force a full table scan on the tables affected. Calling a function will not guarantee that there is a full table scan, but there is a good chance that it will. If you find that you often need to write queries using a particular function, you may need to add a column to the table that has the function already applied.

  Read the article

• How to Restore the Real Internet Explorer Desktop Icon in Windows 7

  - by The Geek

  Remember how previous versions of Windows had an Internet Explorer icon on the desktop, and you could right-click it to quickly access the Internet Options screen? It’s completely gone in Windows 7, but a geeky hack can bring it back. Microsoft removed this feature to comply with all those murky legal battles they’ve had, and their alternate suggestion is to create a standard shortcut to iexplore.exe on the Desktop, but it’s not the same thing. We’ve got a registry hack to bring it back. This guest article was written by Ramesh from the WinHelpOnline blog, where he’s got loads of really geeky registry hacks. Bring Back the Internet Explorer Namespace Icon in Windows 7 the Easy Way If you just want the IE icon back, all you need to do is download the RealInternetExplorerIcon.zip file, extract the contents, and then double-click on the w7_ie_icon_restore.reg file. That’s all you have to do. There’s also an undo registry file there if you want to get rid of it. Download the Real Internet Explorer Icon Registry Hack Manual Registry Hack If you prefer doing things the manual way, or just really want to understand how this hack works, you can follow through the manual steps below to learn how it was done, but we’ll have to warn you that it’s a lot of steps. Launch Regedit.exe using the Start Menu search box, and then navigate to the following location: HKEY_CLASSES_ROOT \ CLSID \ {871C5380-42A0-1069-A2EA-08002B30309D} Right-click on the key on the left-hand pane, choose Export, and save it to a .REG file (say, ie-guid.reg) Open up the REG file using Notepad… From the Edit menu, click Replace, and replace every occurrence of the following GUID string {871C5380-42A0-1069-A2EA-08002B30309D} … with a custom GUID string, such as: {871C5380-42A0-1069-A2EA-08002B30301D} Save the REG file and close Notepad, and then double-click on the file to merge the contents to the registry. Either re-open the registry editor, or use the F5 key to reload everything with the new changes (this step is important). Now you can navigate downto the following registry key: HKEY_CLASSES_ROOT \ CLSID \ {871C5380-42A0-1069-A2EA-08002B30301D} \ Shellex \ ContextMenuHandlers \ ieframe Double-click on the (default) key in the right-hand pane and set its data as: {871C5380-42A0-1069-A2EA-08002B30309D} With this done, press F5 on the desktop and you’ll see the Internet Explorer icon that looks like this: The icon appears incomplete without the Properties command in right click menu, so keep reading. Final Registry Hack Adjustments Click on the following key, which should still be viewable in your Registry editor window from the last step. HKEY_CLASSES_ROOT\CLSID\{871C5380-42A0-1069-A2EA-08002B30301D} Double-click LocalizedString in the right-hand pane and type the following data to rename the icon. Internet Explorer Select the following key: HKEY_CLASSES_ROOT\CLSID\{871C5380-42A0-1069-A2EA-08002B30301D}\shell Add a subkey and name it as Properties, then select the Properties key, double-click the (default) value and type the following: P&roperties Create a String value named Position, and type the following data bottom At this point the window should look something like this: Under Properties, create a subkey and name it as Command, and then set its (default) value as follows: control.exe inetcpl.cpl Navigate down to the following key, and then delete the value named LegacyDisable HKEY_CLASSES_ROOT \ CLSID \ {871C5380-42A0-1069-A2EA-08002B30301D} \ shell \ OpenHomePage Now head to the this key: HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Desktop \ NameSpace Create a subkey named {871C5380-42A0-1069-A2EA-08002B30301D} (which is the custom GUID that we used earlier in this article.) Press F5 to refresh the Desktop, and here is how the Internet Explorer icon would look like, finally. That’s it! It only took 24 steps, but you made it through to the end—of course, you could just download the registry hack and get the icon back with a double-click. Similar Articles Productive Geek Tips Quick Help: Restore Show Desktop Icon in Windows VistaQuick Help: Restore Flip3D Icon in Windows VistaAdd Internet Explorer Icon to Windows XP / Vista DesktopHide, Delete, or Destroy the Recycle Bin Icon in Windows 7 or VistaBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• Silverlight Cream for May 15, 2010 -- #862

  - by Dave Campbell

  In this Issue: Victor Gaudioso, Antoni Dol(-2-), Brian Genisio, Shawn Wildermuth, Mike Snow, Phil Middlemiss, Pete Brown, Kirupa, Dan Wahlin, Glenn Block, Jeff Prosise, Anoop Madhusudanan, and Adam Kinney. Shoutouts: Victor Gaudioso would like you to Checkout my Interview with Microsoft’s Murray Gordon at MIX 10 Pete Brown announced: Connected Show Podcast #29 With … Me! From SilverlightCream.com: New Silverlight Video Tutorial: How to Create Fast Forward for the MediaElement Victor Gaudioso's latest video tutorial is on creating the ability to fast-forward a MediaElement... check it out in the tutorial player itself! Overlapping TabItems with the Silverlight Toolkit TabControl Antoni Dol has a very cool tutorial up on the Toolkit TabItems control... not only is he overlapping them quite nicely but this is a very cool tutorial... QuoteFloat: Animating TextBlock PlaneProjections for a spiraling effect in Silverlight Antoni Dol also has a Blend tutorial up on animating TextBlock items... run the demo and you'll want to read the rest :) Adventures in MVVM – My ViewModel Base – Silverlight Support! Brian Genisio continues his MVVM tutorials with this update on his ViewModel base using some new C# 4.0 features, and fully supports Silverlight and WPF My Thoughts on the Windows Phone 7 Shawn Wildermuth gives his take on WP7. He included a port of his XBoxGames app to WP7 ... thanks Shawn! Silverlight Tip of the Day #20 – Using Tooltips in Silverlight I figured Mike Snow was going to overrun me with tips since I have missed a couple days, but there's only one! ... and it's on Tooltips. Animating the Silverlight opacity mask Phil Middlemiss has an article at SilverZine describing a Behavior he wrote (and is sharing) that turns a FrameworkElement into an opacity mask for it's parent container... cool demo on the page too. Breaking Apart the Margin Property in Xaml for better Binding Pete Brown dug in on a Twitter message and put some thoughts down about breaking a Margin apart to see about binding to the individual elements. Building a Simple Windows Phone App Kirupa has a 6-part tutorial up on building not-your-typical first WP7 application... all good stuff! Integrating HTML into Silverlight Applications Dan Wahlin has a post up discussing three ways to display HTML inside a Silverlight app. Hello MEF in Silverlight 4 and VB! (with an MVVM Light cameo) Glenn Block has a post up discussing MEF, MVVM, and it's in VB this time... and it's actually a great tutorial top to bottom... all source included of course :) Understanding Input Scope in Silverlight for Windows Phone Jeff Prosise has a good post up on the WP7 SIP and how to set the proper InputScope to get the SIP you want. Thinking about Silverlight ‘desktop’ apps – Creating a Standalone Installer for offline installation (no browser) Anoop Madhusudanan is discussing something that's been floating around for a while... installing Silverlight from, say, a CD or DVD when someone installs your app. He's got some good code, but be sure to read Tim Heuer and Scott Guthrie's comments, and consider digging deeper into that part. Using FluidMoveBehavior to animate grid coordinates in Silverlight Adam Kinney has a cool post up on animating an object using the FluidMotionBehavior of Blend 4... looks great moving across a checkerboard... check out the demo, then grab the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Your Job Search Should be More Than Just a New Year's Resolution

  - by david.talamelli

  I love the beginning of a new year, it is a great chance to refocus and either re-evaluate goals you are working to or even set new ones. I don't have any statistics to measure this but I am sure that one of the more popular new year's resolutions in the general workforce is to either get a new job or work to further develop one's career. I think this is a good idea, in today's competitive work force people should have a plan of what they want to do, what role they are after and how to get there. One common mistake I think many people make though is that a career plan shouldn't be a once a year thought. When people finish with the holiday season with their new year's resolution to find a new job fresh in their mind, you can see the enthusiasm and motivation a person has to make something happen. Emails are sent, calls are made, applications are made, networking is happening, etc..... Finding the right role that you are after however can be difficult, while it would be great if that dream role was available just at the time you happened to be looking for it - in reality this is not always the case. Job Seekers need to keep reminding themselves that while sometimes that dream job they are after is available at the same time they are looking, that also a Job search can be a difficult and long process. Many people who set out with the best of intentions in January to find a new job can soon lose interest in a job search if they do not immediately find a role. Just like the Christmas decorations are put away and the photos from New Year's are stored away - a Job Seeker's motivation may slowly decrease until that person finds themselves 12 months later in the same situation in same role and looking for that new opportunity again. Rather than just "going for it" and looking for a role in the month of January, a person's job search or career plan should be an ongoing activity and thought process that is constantly updated and evaluated over the course of the year. It can be hard to stay motivated over an extended period of time, especially when you are newly motivated and ready for that new role and the results are not immediate. Rather than letting your job search fall down the priority list and into the "too hard basket" a few ideas that may keep your enthusiasm fresh Update your resume every 6 months, even if you are not looking for a job - it is easy to forget what you have accomplished if you don't keep your details updated. Also it is good to be prepared and have a resume ready to go in case you do get an unexpected phone call for that 'dream job' you have been hoping for. Work out what you want out of your next role before you begin your job search - rather than aimlessly searching job ads or talking to people - think of the organisations or type of role you would like before you search. If you know what you are looking for it will be much easier to work out how to get there than if you do not know what you want. Don't expect immediate results once you decide to look for another job, things don't always fall into place. Timing and delivery can be important pieces of being selected for a role, companies don't hire every role in January. Have an open mind - people you meet or talk to may not result in immediate results for your job search but every connection may help you get a bit closer to what you are after . These actions will not guarantee a positive result, but in today's competitive work force every little of extra preparation and planning helps. All the best for 2011 and I hope your career plan whatever it may be is a success.

  Read the article

• Make Your Mouse Pointers Left-hand Friendly

  - by Matthew Guay

  It’s a right-centric world, with everything from pencils to computer mice expecting you to be right-handed.  Here’s how you can train your mouse and cursors in Windows 7 and Vista to respect your left-handedness. Using your Left Hand the Right Way It’s easy to switch your mouse to left-handed mode.  Enter “mouse” in your Start menu search, and select the first entry. Check the “Switch primary and secondary buttons” box to make your mouse more left-hand friendly.  Now your primary select button is your right button, and the secondary button (commonly referred to as right-click) is the left button. But, it can still be awkward to select items on screen with your left hand using the default cursors.  MSDN has a free set of cursors designed for left-handed users, that can fix this problem for you.  These cursors are exactly like the default Aero cursors in Windows 7 and Vista, except they are reversed to make them better for left-handed use. The cursors are available in 3 sizes: normal, large, and extra large.  The normal ones are the same size as the default ones in Windows 7; feel free to choose the other sizes if you prefer them.  Click each link to download all 6 cursors for your size (link below). Click “I Agree” after selecting the cursors to accept the license agreement and download them. Once you have all 6 cursors downloaded, select the Pointers tab in the Mouse Properties dialog.  Click the cursor to change, and then click Browse to select the new cursor. Browse to the folder you downloaded your new cursors to, select the correct cursor, and click Open. Do this for each of the 6 cursors to be changed.  Strangely, the Busy cursor (the spinning blue orb) is a static cursor, so you may not wish to change it.  All the other ones look and act like their standard counterparts. Here’s the cursors to be changed, and their equivalents in the default cursors: Normal Select: aero_arrow_left.cur Help Select: aero_helpsel_left.cur Working in Background: aero_working_left.ani Busy: aero_busy_left.cur Handwriting: aero_pen_left.cur Link Select: aero_link_left.cur After changing all the cursors, click Save As… to save this mouse scheme so you can easily select it in the future.  Finally click Ok to close the Mouse Properties dialog and accept the changes. Now your pointers will be easier to use left-handed! Conclusion Whether you’re right-handed or left-handed, you can enjoy the Aero cursors in Windows 7 or Vista in the way that works best for you.  Unfortunately, many mice are still designed for right-handed people, but this trick will help you make the best out of your mouse. We included all of the 6 cursors for you in a zip file you can download Here. This will make it easier for you to get them all together without having to download them individually. Link Download Left-Handed Mouse Pointers from MSDN Similar Articles Productive Geek Tips Prevent Themes From Modifying Icons and Cursors in Windows 7How To Personalize Windows 7 StarterShow Two Time Zones in Your Outlook 2007 CalendarMake Mouse Navigation Faster in WindowsWhy Doesn’t Tab Work for Drop-down Controls in Firefox on OS X? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff

  Read the article

• OSI Model

  - by kaleidoscope

  The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer ·         Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. ·         Establishment and termination of a connection to a communications medium. ·         Participation in the process whereby the communication resources are effectively shared among multiple users. ·         Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer ·         Provides the functional and procedural means to transfer data between network entities. ·         Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). ·         Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. ·         The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. ·         MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. ·         LLC layer controls frame synchronization, flow control and error checking.   Layer 3: Network Layer ·         Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. ·         Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. ·         Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible.   Layer 4: Transport Layer ·         Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. ·         Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. ·         Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer ·         Controls the dialogues (connections) between computers. ·         Establishes, manages and terminates the connections between the local and remote application. ·         Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. ·         Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer ·         Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. ·         Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer ·         This layer interacts with software applications that implement a communicating component. ·         Identifies communication partners, determines resource availability, and synchronizes communication. o       When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o       When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o       In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

  Read the article

• Dynamic Class Inheritance For PHP

  - by VirtuosiMedia

  I have a situation where I think I might need dynamic class inheritance in PHP 5.3, but the idea doesn't sit well and I'm looking for a different design pattern to solve my problem if it's possible. Use Case I have a set of DB abstraction layer classes that dynamically compiles SQL queries, with one DAL class for each DB type (MySQL, MsSQL, Oracle, etc.). Each table in the database has its own class that extends the appropriate DAL class. The idea is that you interact with the table classes, but never directly use the DAL class. If you want to support a different DB type for your app, you don't need to rewrite any queries or even any code, you simply change a setting that swaps one DAL class out for another...and that's it. To give you a better idea of how this is used, you can take a look at the DAL class, the table classes, and how they are used on this StackExchange Code Review page. To really understand what I'm trying to do, please take a look at my implementation first before suggesting a solution. Issues The strategy that I had used previously was to have all of the DAL classes share the same class name. This eliminated autoloading, so I had to manually load the appropriate DAL class in a switch statement. However, this approach presents some problems for testing and documentation purposes, so I'd like to find a different way to solve the problem of loading the correct DAL class more elegantly. Update to clarify the issue The problem basically boils down to inconsistencies in the class name (pre-PHP 5.3) or class namespace (PHP 5.3) and its location in the directory structure. At this point, all of my DAL classes have the same name, DBObject, but reside in different folders, MySQL, Oracle, etc. My table classes all extend DBObject, but which DBObject they extend varies depending on which one has been loaded. Basically, I'm trying to have my cake and eat it too. The table classes act as a stable API and extend a dynamic backend, the DAL (DBObject) classes. It works great, but I outsmarted myself and because of the inconsistencies with the class names and their locations, I can't autoload the DBObject, which makes running unit tests and generating API docs impossible for the DBObject classes because the tests and docs rely on auto-loading. Just loading the appropriate DBObject into memory using a factory method won't work because there will be times when I need to load multiple DBObjects for testing. Because the classes currently share a name, this causes a class is already defined error. I can make exceptions for the DBObjects in my test code, obviously, but I'm looking for something a little less hacky as there may future instances where something similar would need to be done. Solutions? Worst case scenario, I can continue my current strategy, but I don't like it very much, especially as I'll soon be converting my code to PHP 5.3. I suspect that I can use some sort of dynamic inheritance via either namespaces (preferred) or a dynamic class extension, but I haven't been able to find good examples of this implemented in the wild. In your answers, please suggest either an alternate pattern that would work for this use case or an example of dynamic inheritance done right. Please assume PHP 5.3 with namespaced code. Any code examples are greatly encouraged. The preferred constraints for the solution are: DAL class can be autoloaded. DAL classes don't share the same exact same namespace, but share the same class name. As an example, I would prefer to use classes named DbObject that use namespaces like Vm\Db\MySql and Vm\Db\Oracle. Table classes don't have to be rewritten with a change in DB type. The appropriate DB type is determined via a single setting only. That setting is the only thing that should need to change to interchange DB types. Ideally, the setting check should occur only once per page load, but I'm flexible on that.

  Read the article

• How to Crop Pictures in Word, Excel, and PowerPoint 2010

  - by DigitalGeekery

  When you add pictures to your Office documents you might need to crop them to remove unwanted areas, or isolate a specific part. Today we’ll take a look at how to crop images in Office 2010. Note: We will show you examples in Word, but you can crop images in Word, Excel, and PowerPoint. To insert a picture into your Office document, click the Picture button on the Insert tab. The Picture Tools format ribbon should now be active. If not, click on the image. New in Office 2010 is the ability to see the area of the photo that you are keeping in addition to what will be cropped out. On the Format tab, click Crop. Click and drag inward any of the four corners to crop from any one side. Notice you can still see the area to be cropped out is show in translucent gray. Press and hold the CTRL key while you drag a corner cropping handle inward to crop equally on all four sides. To crop equally on right and left or the top and bottom, press and hold down the CTRL key while you drag the center cropping handle on either side inward. You can further adjust the cropping area by clicking and dragging the picture behind the cropping area. To accept the current dimensions and crop the photo, press escape or click anywhere outside the cropping area. You can manually crop the image to exact dimensions. This can be done by right clicking on the image and entering the dimensions in the Width and Height boxes, or in the Size group on the Format tab.   Crop to a Shape Select your photo and click Crop from the Size group on the Format tab. Select Crop to Shape and choose any of the available shapes. You photo will be cropped into that shape. Using Fit and Fill If you wish to crop a photo but fill the shape, select Fill. When you choose this option, some edges of the picture might not display but the original picture aspect ratio is maintained. If you wish to have all of the picture fit within a shape, choose Fit. The original picture aspect ratio will be maintained.   Conclusion Users moving from previous versions of Microsoft Office are sure to appreciate the improved cropping abilities in Office 2010, especially the ability to see what will and won’t be kept when you crop a photo. Similar Articles Productive Geek Tips Import Microsoft Access Data Into ExcelEmbed an Excel Worksheet Into PowerPoint or Word 2007Add Artistic Effects to Your Pictures in Office 2010Embed True Type Fonts in Word and PowerPoint 2007 DocumentsChange The Default Color Scheme In Office 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• Clustering for Mere Mortals (Pt2)

  - by Geoff N. Hiten

  Planning. I could stop there and let that be the entirety post #2 in this series.  Planning is the single most important element in building a cluster and the Laptop Demo Cluster is no exception.  One of the more awkward parts of actually creating a cluster is coordinating information between Windows Clustering and SQL Clustering.  The dialog boxes show up hours apart, but still have to have matching and consistent information. Excel seems to be a good tool for tracking these settings.  My workbook has four pages: Systems, Storage, Network, and Service Accounts.  The systems page looks like this:   Name Role Software Location East Physical Cluster Node 1 Windows Server 2008 R2 Enterprise Laptop VM West Physical Cluster Node 2 Windows Server 2008 R2 Enterprise Laptop VM North Physical Cluster Node 3 (Future Reserved) Windows Server 2008 R2 Enterprise Laptop VM MicroCluster Cluster Management Interface N/A Laptop VM SQL01 High-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL02 High-Performance Standard-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL03 Standard-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM Note that everything that has a computer name is listed here, whether physical or virtual. Storage looks like this: Storage Name Instance Purpose Volume Path Size (GB) LUN ID Speed Quorum MicroCluster Cluster Quorum Quorum Q: 2     SQL01Anchor SQL01 Instance Anchor SQL01Anchor L: 2     SQL02Anchor SQL02 Instance Anchor SQL02Anchor M: 2     SQL01Data1 SQL01 SQL Data SQL01Data1 L:\MountPoints\SQL01Data1 2     SQL02Data1 SQL02 SQL Data SQL02Data1 M:\MountPoints\SQL02Data1       Starting at the left is the name used in the storage array.  It is important to rename resources at each level, whether it is Storage, LUN, Volume, or disk folder.  Otherwise, troubleshooting things gets complex and difficult.  You want to be able to glance at a resource at any level and see where it comes from and what it is connected to. Networking is the same way:   System Network VLAN  IP Subnet Mask Gateway DNS1 DNS2 East Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 East Heartbeat Cluster2   255.255.255.0       West Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 West Heartbeat Cluster2   255.255.255.0       North Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 North Heartbeat Cluster2   255.255.255.0       SQL01 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       SQL02 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       One hallmark of a poorly planned and implemented cluster is a bunch of "Local Network Connection #n" entries in the network settings page.  That lets me know that somebody didn't care about the long-term supportabaility of the cluster.  This can be critically important with Hyper-V Clusters and their high NIC counts.  Final page:   Instance Service Name Account Password Domain OU SQL01 SQL Server SVCSQL01 Baseline22 MicroAD Service Accounts SQL01 SQL Agent SVCSQL01 Baseline22 MicroAD Service Accounts SQL02 SQL Server SVC_SQL02 Baseline22 MicroAD Service Accounts SQL02 SQL Agent SVC_SQL02 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Server SVC_SQL03 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Agent SVC_SQL03 Baseline22 MicroAD Service Accounts             Installation Account           administrator            Yes.  I write down the account information.  I secure the file via NTFS, but I don't want to fumble around looking for passwords when it comes time to rebuild a node. Always fill out the workbook COMPLETELY before installing anything.  The whole point is to have everything you need at your fingertips before you begin.  The install experience is so much better and more productive with this information in place.

  Read the article

• I spy a Live Framework portal

  - by jamiet

  Those that have followed my blogs for a while may know that I have a slightly banal interest in Windows Live and, more specifically, the Live Services developer platform'; if that doesn’t sound interesting to you then stop reading now. My interest mainly stems from the Live Mesh technology that was announced a couple of years ago and the data synchronisation platform API that underpins it; that platform is called the Live Framework or LiveFX for short. At the Professional Developer’s Conference (PDC) 2008 Microsoft made LiveFX available to the public as a Tech Preview and I spent some time learning to use it and also built a few test apps on it too. In August 2009 an announcement came that that tech preview was getting shut down: "At the Professional Developer Conference 2008, we gave the developer community access to the technical preview of the Live Framework. The Live Framework is core to our vision of providing you with a consistent programming interface. Now we are working to integrate existing services, controls and the Live Framework into the next release of Windows Live. Your feedback continues to help us build the best possible offerings for Windows Live users, for you and for your customers. " Since then news on LiveFX has disappeared save for a throwaway session at PDC09 and I was hoping that news was going to appear at this week’s MIX conference but nothing was forthcoming. Instead though today I stumbled upon an unannounced portal for future LiveFX applications on Microsoft’s Azure portal at http://live.azure.com. Check it out: I consider this to be very good news. This Azure portal was built after the LiveFX tech preview was decommissioned so seeing Live Services existing so prominently alongside Microsoft’s other cloud efforts like Windows Azure and SQL Azure vindicates my early investment in the platform and gives me hope that we’re going to see something get released very very soon. I believe that the potential uses for this platform are extremely compelling and I’m looking forward to trying some out in the near future. I am also expecting LiveFX to have a heavy dependency on the OData protocol that I talked about yesterday in my post OData.org updated - gives clues about future sql azure enhancements so you can tell where my interest in that stems from. In case you’re wondering the projects that you see listed above (Basic List Sample, JT-proj etc…) are projects that I built on the old Tech Preview platform so clearly that stuff has not gone for good which is also good news; not just because it means I’ll have access to the code I wrote before but I also assume it means that LiveFX won’t have changed much since its tech preview incarnation. I know there are other LiveFX buffs out there and hopefully this news reaches some of them. If you are one of them the please put a comment below and let me know your thoughts! @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• When to implement: Together with or after the source product?

  - by Jeremy Oosthuizen

  Somebody recently relayed a prospect's question to me: How hard would it be to implement OUBI after the source product (CC&B, WAM or NMS) has already been implemented? Fact is that MOST non-OUBI Data Warehouse / Business Intelligence implementations take place after the source application(s) are in place and hopefully stable. If an organization decides that they need better reporting and management information, then the logical path (see The Data Warehouse Institute's Data Warehouse Maturity Model) is to a Data Warehouse -- no matter when their last applications were implemented. If there is a pre-built Data Warehouse for their specific application, or even for the desired business process in their industry, they're in luck. Else they have to design and build from scratch, using a toolset. The implementation of a toolset is unlike the implementation of OUBI which, like OBI Apps, contain pre-built ETL routines and user content. Much has been written before about the advantages of that. So, because OUBI is designed specifically for Oracle Utilities transactional products, we often implement them in parallel -- with OUBI lagging a little behind by necessity, like Reporting. Customers know from the start they're going to need the solution, and therefore purchase the products at the same time. My biggest argument FOR a parallel installation/implementation of OUBI with the source product is two-fold: - There could be things (which is the technical term for data elements) that customers figure out they need when implementing OUBI, which are often easier added to the source product's implementation project, than to add later; - OUBI's ETL often points out errors (severe or not) with converted data, which are easier to fix during the source product's implementation project, or it may even be impossible to fix afterwards. The Conversion routines sometimes miss these errors, because the source system can live with the not-quite-perfect converted data. If the data can't be properly extracted, i.e. the proper Dimensions linked to the Facts, then it can't get into OUBI. That means it can't be analyzed effectively along with the rest of the organization's data. Then there is also the throw-away-work argument, which may be significant. The operational / transactional system cannot go live without reports on Day 1. A lot of those reports would be taken care of by the implementation of OUBI. If OUBI is implemented after go-live, those reports STILL have to be built during the source product's implementation project, but they become throw-away after the OUBI implementation. I have sometimes been told that it is better to implement OUBI after the source product, because it cuts down on scope and risk for the source product's implementation project. All I can say to that, is bah humbug. No, seriously, given the arguments above, planning has to include the OUBI implementation and it has to be managed properly -- just like any other implementation. If so, it should not add any risk and it should be included in the scope from the start. The answer to the prospect's question is therefore that it is not that much more difficult; after all, most DW/BI implemenations are done like that. They just have to consider the points above.

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 23 (sys.dm_db_index_usage_stats)

  - by Tamarick Hill

  The sys.dm_db_index_usage_stats Dynamic Management View is used to return usage information about the various indexes on your SQL Server instance. Let’s have a look at this DMV against our AdventureWorks2012 database so we can examine the information returned. SELECT * FROM sys.dm_db_index_usage_stats WHERE database_id = db_id('AdventureWorks2012') The first three columns in the result set represent the database_id, object_id, and index_id of a given row. You can join these columns back to other system tables to extract the actual database, object, and index names. The next four columns are probably the most beneficial columns within this DMV. First, the user_seeks column represents the number of times that a user query caused a seek operation against a particular index. The user_scans column represents how many times a user query caused a scan operation on a particular index. The user_lookups column represents how many times an index was used to perform a lookup operation. The user_updates column refers to how many times an index had to be updated due to a write operation that effected a particular index. The last_user_seek, last_user_scan, last_user_lookup, and last_user_update columns provide you with DATETIME information about when the last user scan, seek, lookup, or update operation was performed. The remaining columns in the result set are the same as the ones we previously discussed, except instead of the various operations being generated from user requests, they are generated from system background requests. This is an extremely useful DMV and one of my favorites when it comes to Index Maintenance. As we all know, indexes are extremely beneficial with improving the performance of your read operations. But indexes do have a downside as well. Indexes slow down the performance of your write operations, and they also require additional resources for storage. For this reason, in my opinion, it is important to regularly analyze the indexes on your system to make sure the indexes you have are being used efficiently. My AdventureWorks2012 database is only used for demonstrating or testing things, so I dont have a lot of meaningful information here, but for a Production system, if you see an index that is never getting any seeks, scans, or lookups, but is constantly getting a ton of updates, it more than likely would be a good candidate for you to consider removing. You would not be getting much benefit from the index, but yet it is incurring a cost on your system due to it constantly having to be updated for your write operations, not to mention the additional storage it is consuming. You should regularly analyze your indexes to ensure you keep your database systems as efficient and lean as possible. One thing to note is that these DMV statistics are reset every time SQL Server is restarted. Therefore it would not be a wise idea to make decisions about removing indexes after a Server Reboot or a cluster roll. If you restart your SQL Server instances frequently, for example if you schedule weekly/monthly cluster rolls, then you may not capture indexes that are being used for weekly/monthly reports that run for business users. And if you remove them, you may have some upset people at your desk on Monday morning. If you would like to begin analyzing your indexes to possibly remove the ones that your system is not using, I would recommend building a process to load this DMV information into a table on scheduled basis, depending on how frequently you perform an operation that would reset these statistics, then you can analyze the data over a period of time to get a more accurate view of what indexes are really being used and which ones or not. For more information about this DMV, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms188755.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• Guest (and occasional co-host) on Jesse Liberty's Yet Another Podcast

  - by Jon Galloway

  I was a recent guest on Jesse Liberty's Yet Another Podcast talking about the latest Visual Studio, ASP.NET and Azure releases. Download / Listen: Yet Another Podcast #75–Jon Galloway on ASP.NET/ MVC/ Azure Co-hosted shows: Jesse's been inviting me to co-host shows and I told him I'd show up when I was available. It's a nice change to be a drive-by co-host on a show (compared with the work that goes into organizing / editing / typing show notes for Herding Code shows). My main focus is on Herding Code, but it's nice to pop in and talk to Jesse's excellent guests when it works out. Some shows I've co-hosted over the past year: Yet Another Podcast #76–Glenn Block on Node.js & Technology in China Yet Another Podcast  #73 - Adam Kinney on developing for Windows 8 with HTML5 Yet Another Podcast #64 - John Papa & Javascript Yet Another Podcast #60 - Steve Sanderson and John Papa on Knockout.js Yet Another Podcast #54–Damian Edwards on ASP.NET Yet Another Podcast #53–Scott Hanselman on Blogging Yet Another Podcast #52–Peter Torr on Windows Phone Multitasking Yet Another Podcast #51–Shawn Wildermuth: //build, Xaml Programming & Beyond And some more on the way that haven't been released yet. Some of these I'm pretty quiet, on others I get wacky and hassle the guests because, hey, not my podcast so not my problem. Show notes from the ASP.NET / MVC / Azure show: What was just released Visual Studio 2012 Web Developer features ASP.NET 4.5 Web Forms Strongly Typed data controls Data access via command methods Similar Binding syntax to ASP.NET MVC Some context: Damian Edwards and WebFormsMVP Two questions from Jesse: Q: Are you making this harder or more complicated for Web Forms developers? Short answer: Nothing's removed, it's just a new option History of SqlDataSource, ObjectDataSource Q: If I'm using some MVC patterns, why not just move to MVC? Short answer: This works really well in hybrid applications, doesn't require a rewrite Allows sharing models, validation, other code between Web Forms and MVC ASP.NET MVC Adaptive Rendering (oh, also, this is in Web Forms 4.5 as well) Display Modes Mobile project template using jQuery Mobile OAuth login to allow Twitter, Google, Facebook, etc. login Jon (and friends') MVC 4 book on the way: Professional ASP.NET MVC 4 Windows 8 development Jesse and Jon announce they're working on a new book: Pro Windows 8 Development with XAML and C# Jon and Jesse agree that it's nice to be able to write Windows 8 applications using the same skills they picked up for Silverlight, WPF, and Windows Phone development. Compare / contrast ASP.NET MVC and Windows 8 development Q: Does ASP.NET and HTML5 development overlap? Jon thinks they overlap in the MVC world because you're writing HTML views without controls Jon describes how his web development career moved from a preoccupation with server code to a focus on user interaction, which occurs in the browser Jon mentions his NDC Oslo presentation on Learning To Love HTML as Beautiful Code Q: How do you apply C# / XAML or HTML5 skills to Windows 8 development? Q: If I'm a XAML programmer, what's the learning curve on getting up to speed on ASP.NET MVC? Jon describes the difference in application lifecycle and state management Jon says it's nice that web development is really interactive compared to application development Q: Can you learn MVC by reading a book? Or is it a lot bigger than that? What is Azure, and why would I use it? Jon describes the traditional Azure platform mode and how Azure Web Sites fits in Q: Why wouldn't Jesse host his blog on Azure Web Sites? Domain names on Azure Web Sites File hosting options Q: Is Azure just another host? How is it different from any of the other shared hosting options? A: Azure gives you the ability to scale up or down whenever you want A: Other services are available if or when you want them

  Read the article

• How To Delete Built-in Windows 7 Power Plans (and Why You Probably Shouldn’t)

  - by The Geek

  Do you actually use the Windows 7 power management features? If so, have you ever wanted to just delete one of the built-in power plans? Here’s how you can do so, and why you probably should leave it alone. Just in case you’re new to the party, we’re talking about the power plans that you see when you click on the battery/plug icon in the system tray. The problem is that one of the built-in plans always shows up there, even if you only use custom plans. When you go to “More power options” on the menu there, you’ll be taken to a list of them, but you’ll be unable to get rid of any of the built-in ones, even if you have your own. You can actually delete the power plans, but it will probably cause problems, so we highly recommend against it. If you still want to proceed, keep reading. Delete Built-in Power Plans in Windows 7 Open up an Administrator mod command prompt by right-clicking on the command prompt and choosing “Run as Administrator”, then type in the following command, which will show you a whole list of the plans. powercfg list Do you see that really long GUID code in the middle of each listing? That’s what we’re going to need for the next step. To make it easier, we’ll provide the codes here, just in case you don’t know how to copy to the clipboard from the command prompt. Power Scheme GUID: 381b4222-f694-41f0-9685-ff5bb260df2e  (Balanced) Power Scheme GUID: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c  (High performance)Power Scheme GUID: a1841308-3541-4fab-bc81-f71556f20b4a  (Power saver) Before you do any deleting, what you’re going to want to do is export the plan to a file using the –export parameter. For some unknown reason, I used the .xml extension when I did this, though the file isn’t in XML format. Moving on… here’s the syntax of the command: powercfg –export balanced.xml 381b4222-f694-41f0-9685-ff5bb260df2e This will export the Balanced plan to the file balanced.xml. And now, we can delete the plan by using the –delete parameter, and the same GUID.  powercfg –delete 381b4222-f694-41f0-9685-ff5bb260df2e If you want to import the plan again, you can use the -import parameter, though it has one weirdness—you have to specify the full path to the file, like this: powercfg –import c:\balanced.xml Using what you’ve learned, you can export each of the plans to a file, and then delete the ones you want to delete. Why Shouldn’t You Do This? Very simple. Stuff will break. On my test machine, for example, I removed all of the built-in plans, and then imported them all back in, but I’m still getting this error anytime I try to access the panel to choose what the power buttons do: There’s a lot more error messages, but I’m not going to waste your time with all of them. So if you want to delete the plans, do so at your own peril. At least you’ve been warned! Similar Articles Productive Geek Tips Learning Windows 7: Manage Power SettingsCreate a Shortcut or Hotkey to Switch Power PlansDisable Power Management on Windows 7 or VistaChange the Windows 7 or Vista Power Buttons to Shut Down/Sleep/HibernateDisable Windows Vista’s Built-in CD/DVD Burning Features TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

  Read the article

• WSS 3.0/MOSS 2007 Active Directory Forms Based Authentication PeoplePicker no users found

  - by John Haigh

  WSS 3.0/MOSS 2007 Active Directory Forms Based Authentication PeoplePicker no users found After finding these steps online from http://dattard.blogspot.com/2008/11/active-directory-forms-based.html in order to setup Active Directory Forms Based Authentication I was all set to complete this task, except for one problem. These steps are missing one very important vital step in order for FBA to work with Active Directory. A supplement to step 3 before granting access in step 5 through the people picker. You need to specify the Active Directory Provider Name to the people picker, otherwise you will not be able specify users through the Policy for Web Application. <PeoplePickerWildcards>       <clear />          <add key="ADMembershipProvider" value="%" />     </PeoplePickerWildcards> Recently we needed to use Forms Based Authentication with Active Directory from an Extranet. This is how we got it to work. 1. Extend the Web Application Instead of tweaking the internal web app, Extend the web application you want to expose to the Extranet, giving it the required host headers etc. 2. Configure SharePoint Central Admin to use FBA for the "new" Web Applications Login to SharePoint Central Admin Go to Application Management / Application Security / Authentication Providers and Change the Web Application to the one which needs to be configured for Forms Based Authentication Click zone / default, change authentication type to forms and enter ActiveDirectoryMemebershipProvider under membership provider name ( for example , "ADMembershipProvider") and save this change 3. Update the web.config of SharePoint Central admin site under configuration node <connectionStrings> <add name="ADConnectionString" connectionString="LDAP://DynamicsAX.local/CN=Users,DC=DynamicsAX,DC=local /> </connectionStrings> under system.web node <membership defaultProvider="ADMembershipProvider"> <providers> <add name="ADMembershipProvider" type="System.Web.Security.ActiveDirectoryMembershipProvider,System.Web,Version=2.0.0.0,Culture=neutral,PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ADConnectionString" connectionUsername="xxx" connectionPassword="yyy" enableSearchMethods="true" attributeMapUsername="sAMAccountName"/> </providers> </membership> 4.Update the web.config of SharePoint Web application Repeat step 3 for the web.config of the SharePoint webapplication to be configured for Forms Based Authentication Change the authentication in web.config to <authentication mode="Forms"> <forms loginUrl="/_layouts/login.aspx"></forms> </authentication> 5. Grant Access on the extended Web Application Your extranet web application is now configured to use FBA. However, until users, who will be accessing the site via FBA, are given permissions for the site, it will be inaccessible to them. To get started, open your browser and navigate to your farm’s Central Administration site. Click on Application Management and then click on Policy for Web Application. Make sure that you are working on the extranet web application. Do the following steps: Click on Add Users. In the Zones drop down, select the appropriate Extranet zone. IMPORTANT: If you select the incorrect zone, you may not be able to resolve user names. Hence, the zone you select must match the zone of the web application that is configured to use FBA. Click the Next button. In the Users edit box, type the name of the FBA user whom you wish to have full control for the site. Click the Resolve link next to the Users edit box. If the web application's FBA information has been configured correctly, the name will resolve and become underlined. Check the Full Control checkbox. Click the Finish button.

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

< Previous Page | 629 630 631 632 633 634 635 636 637 638 639 640  | Next Page >