Search Results

Search found 81493 results on 3260 pages for 'file size'.

Page 634/3260 | < Previous Page | 630 631 632 633 634 635 636 637 638 639 640 641  | Next Page >

  • Error while upgrading

    - by arun
    When i have select to install updates from the update manager it says: Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux-image-3.0.0-13-generic_3.0.0-13.22_i386.deb Size mismatch I have tried several times and through terminal too but the size mismatch repeats itself there too. What is this size mismatch error ? Please Help ? tried sudo apt-get update and the sudo apt-get upgrade but the again error comes:: Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/x/xserver-xorg-video-intel/xserver-xorg-video-intel_2.15.901-1ubuntu2.1_i386.deb Size mismatch E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

    Read the article

  • How do I align my partition table properly?

    - by Jorge Castro
    I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

    Read the article

  • How does Ubuntu One sync two machines with identical file content?

    - by user27449
    I have a notebook and a desktop computer, both running Ubuntu 11.10. I used to sync between the two with the help of Unison, so both computers have identical content in the Documents folder. I decided to try UbuntuOne. My question is, if I activate UbuntuOne for the two machines for the folders with identical contents, will UbuntuOne be able to recognise that, or will it sync to the cloud everything twice (and then down on the other machine). To put it another way, will I end up having two copies of everything on the machines and on the cloud, and therefore should delete the identical files on one of the machines before activating UbuntuOne, or not. Thank you, and if there is already something on the net about this, I'd be glad if somebody posted the link here.

    Read the article

  • WNA Configuration in OAM 11g

    - by P Patra
    Pre-Requisite: Kerberos authentication scheme has to exist. This is usually pre-configured OAM authentication scheme. It should have Authentication Level - "2", Challenge Method - "WNA", Challenge Direct URL - "/oam/server" and Authentication Module- "Kerberos". The default authentication scheme name is "KerberosScheme", this name can be changed. The DNS name has to be resolvable on the OAM Server. The DNS name with referrals to AD have to be resolvable on OAM Server. Ensure nslookup work for the referrals. Pre-Install: AD team to produce keytab file on the AD server by running ktpass command. Provide OAM Hostname to AD Team. Receive from AD team the following: Keypass file produced when running the ktpass command ktpass username ktpass password Copy the keytab file to convenient location in OAM install tree and rename the file if desired. For instance where oam-policy.xml file resides. i.e. /fa_gai2_d/idm/admin/domains/idm-admin/IDMDomain/config/fmwconfig/keytab.kt Configure WNA Authentication on OAM Server: Create config file krb.config and set the environment variable to the path to this file: KRB_CONFIG=/fa_gai2_d/idm/admin/domains/idm-admin/IDMDomain/config/fmwconfig/krb.conf The variable KRB_CONFIG has to be set in the profile for the user that OAM java container(i.e. Wbelogic Server) runs as, so that this setting is available to the OAM server. i.e. "applmgr" user. In the krb.conf file specify: [libdefaults] default_realm= NOA.ABC.COM dns_lookup_realm= true dns_lookup_kdc= true ticket_lifetime= 24h forwardable= yes [realms] NOA.ABC.COM={ kdc=hub21.noa.abc.com:88 admin_server=hub21.noa.abc.com:749 default_domain=NOA.ABC.COM [domain_realm] .abc.com=ABC.COM abc.com=ABC.COM .noa.abc.com=NOA.ABC.COM noa.abc.com=NOA.ABC.COM Where hub21.noa.abc.com is load balanced DNS VIP name for AD Server and NOA.ABC.COM is the name of the domain. Create authentication policy to WNA protect the resource( i.e. EBSR12) and choose the "KerberosScheme" as authentication scheme. Login to OAM Console => Policy Configuration Tab => Browse Tab => Shared Components => Application Domains => IAM Suite => Authentication Policies => Create Name: ABC WNA Auth Policy Authentication Scheme: KerberosScheme Failure URL: http://hcm.noa.abc.com/cgi-bin/welcome Edit System Configuration for Kerberos System Configuration Tab => Access Manager Settings => expand Authentication Modules => expand Kerberos Authentication Module => double click on Kerberos Edit "Key Tab File" textbox - put in /fa_gai2_d/idm/admin/domains/idm-admin/IDMDomain/config/fmwconfig/keytab.kt Edit "Principal" textbox - put in HTTP/[email protected] Edit "KRB Config File" textbox - put in /fa-gai2_d/idm/admin/domains/idm-admin/IDMDomain/config/fmwconfig/krb.conf Cilck "Apply" In the script setting environment for the WLS server where OAM is deployed set the variable: KRB_CONFIG=/fa_gai2_d/idm/admin/domains/idm-admin/IDMDomain/config/fmwconfig/krb.conf Re-start OAM server and OAM Server Container( Weblogic Server)

    Read the article

  • How do I change the default .htm file icon?

    - by Michael Clayton
    I really enjoy the look of UBUNTU. The only thing that I want to change is the default icon used for .html (.htm) files. I want to use the icon /usr/lib/firefox/browser/icons/mozicon128.png instead. I do not want to change any other visual element. Is there a practical way to accomplish this small change? edit: @Mitch, I've used assogiate in the past and although I was able to change the icon used for .mht files, I could not get it to change the .htm icon. @Anwar Shah, thanks for the information. I wish that it would work for me. Running 13.10 x86, after I do the copy of the icons, in the folders are a bunch of links to .svg files not actual graphics files. It does not appear that the second copy actually does anything on my system.

    Read the article

  • Pygame surfaces and their Rects

    - by Jaka Novak
    I am trying to understand how pygame surfaces work. I am confused about Rect position of Surface object. If I try blit surface on screen at some position then Surface is drawn at right position, but Rect of the surface is still at position (0, 0)... I tried write my own surface class with new rect, but i am not sure if is that right solution. My goal is that i could move surface like image with rect.move() or something like that. If there is any solution to do that i would be happy to read it. Thanks for answer and time for reading this awful English If helps i write some code for better understanding my problem. (run it first, and then uncomment two lines of code and run again to see the diference): import pygame from pygame.locals import * class SurfaceR(pygame.Surface): def __init__(self, size, position): pygame.Surface.__init__(self, size) self.rect = pygame.Rect(position, size) self.position = position self.size = size def get_rect(self): return self.rect def main(): pygame.init() screen = pygame.display.set_mode((640, 480)) pygame.display.set_caption("Screen!?") clock = pygame.time.Clock() fps = 30 white = (255, 255, 255) red = (255, 0, 0) green = (0, 255, 0) blue = (0, 0, 255) surface = pygame.Surface((70,200)) surface.fill(red) surface_re = SurfaceR((300, 50), (100, 300)) surface_re.fill(blue) while True: for event in pygame.event.get(): if event.type == QUIT: return 0 screen.blit(surface, (100,50)) screen.blit(surface_re, surface_re.position) #pygame.draw.rect(screen, white, surface.get_rect()) #pygame.draw.rect(screen, white, surface_re.get_rect()) pygame.display.update() clock.tick(fps) if __name__ == "__main__": main()

    Read the article

  • Self-signed certificates for a known community

    - by costlow
    Recently announced changes scheduled for Java 7 update 51 (January 2014) have established that the default security slider will require code signatures and the Permissions Manifest attribute. Code signatures are a common practice recommended in the industry because they help determine that the code your computer will run is the same code that the publisher created. This post is written to help users that need to use self-signed certificates without involving a public Certificate Authority. The role of self-signed certificates within a known community You may still use self-signed certificates within a known community. The difference between self-signed and purchased-from-CA is that your users must import your self-signed certificate to indicate that it is valid, whereas Certificate Authorities are already trusted by default. This works for known communities where people will trust that my certificate is mine, but does not scale widely where I cannot actually contact or know the systems that will need to trust my certificate. Public Certificate Authorities are widely trusted already because they abide by many different requirements and frequent checks. An example would be students in a university class sharing their public certificates on a mailing list or web page, employees publishing on the intranet, or a system administrator rolling certificates out to end-users. Managed machines help this because you can automate the rollout, but they are not required -- the major point simply that people will trust and import your certificate. How to distribute self-signed certificates for a known community There are several steps required to distribute a self-signed certificate to users so that they will properly trust it. These steps are: Creating a public/private key pair for signing. Exporting your public certificate for others Importing your certificate onto machines that should trust you Verify work on a different machine Creating a public/private key pair for signing Having a public/private key pair will give you the ability both to sign items yourself and issue a Certificate Signing Request (CSR) to a certificate authority. Create your public/private key pair by following the instructions for creating key pairs.Every Certificate Authority that I looked at provided similar instructions, but for the sake of cohesiveness I will include the commands that I used here: Generate the key pair.keytool -genkeypair -alias erikcostlow -keyalg EC -keysize 571 -validity 730 -keystore javakeystore_keepsecret.jks Provide a good password for this file. The alias "erikcostlow" is my name and therefore easy to remember. Substitute your name of something like "mykey." The sigalg of EC (Elliptical Curve) and keysize of 571 will give your key a good strong lifetime. All keys are set to expire. Two years or 730 days is a reasonable compromise between not-long-enough and too-long. Most public Certificate Authorities will sign something for one to five years. You will be placing your keys in javakeystore_keepsecret.jks -- this file will contain private keys and therefore should not be shared. If someone else gets these private keys, they can impersonate your signature. Please be cautious about automated cloud backup systems and private key stores. Answer all the questions. It is important to provide good answers because you will stick with them for the "-validity" days that you specified above.What is your first and last name?  [Unknown]:  First LastWhat is the name of your organizational unit?  [Unknown]:  Line of BusinessWhat is the name of your organization?  [Unknown]:  MyCompanyWhat is the name of your City or Locality?  [Unknown]:  City NameWhat is the name of your State or Province?  [Unknown]:  CAWhat is the two-letter country code for this unit?  [Unknown]:  USIs CN=First Last, OU=Line of Business, O=MyCompany, L=City, ST=CA, C=US correct?  [no]:  yesEnter key password for <erikcostlow>        (RETURN if same as keystore password): Verify your work:keytool -list -keystore javakeystore_keepsecret.jksYou should see your new key pair. Exporting your public certificate for others Public Key Infrastructure relies on two simple concepts: the public key may be made public and the private key must be private. By exporting your public certificate, you are able to share it with others who can then import the certificate to trust you. keytool -exportcert -keystore javakeystore_keepsecret.jks -alias erikcostlow -file erikcostlow.cer To verify this, you can open the .cer file by double-clicking it on most operating systems. It should show the information that you entered during the creation prompts. This is the file that you will share with others. They will use this certificate to prove that artifacts signed by this certificate came from you. If you do not manage machines directly, place the certificate file on an area that people within the known community should trust, such as an intranet page. Import the certificate onto machines that should trust you In order to trust the certificate, people within your known network must import your certificate into their keystores. The first step is to verify that the certificate is actually yours, which can be done through any band: email, phone, in-person, etc. Known networks can usually do this Determine the right keystore: For an individual user looking to trust another, the correct file is within that user’s directory.e.g. USER_HOME\AppData\LocalLow\Sun\Java\Deployment\security\trusted.certs For system-wide installations, Java’s Certificate Authorities are in JAVA_HOMEe.g. C:\Program Files\Java\jre8\lib\security\cacerts File paths for Mac and Linux are included in the link above. Follow the instructions to import the certificate into the keystore. keytool -importcert -keystore THEKEYSTOREFROMABOVE -alias erikcostlow -file erikcostlow.cer In this case, I am still using my name for the alias because it’s easy for me to remember. You may also use an alias of your company name. Scaling distribution of the import The easiest way to apply your certificate across many machines is to just push the .certs or cacerts file onto them. When doing this, watch out for any changes that people would have made to this file on their machines. Trusted.certs: When publishing into user directories, your file will overwrite any keys that the user has added since last update. CACerts: It is best to re-run the import command with each installation rather than just overwriting the file. If you just keep the same cacerts file between upgrades, you will overwrite any CAs that have been added or removed. By re-importing, you stay up to date with changes. Verify work on a different machine Verification is a way of checking on the client machine to ensure that it properly trusts signed artifacts after you have added your signing certificate. Many people have started using deployment rule sets. You can validate the deployment rule set by: Create and sign the deployment rule set on the computer that holds the private key. Copy the deployment rule set on to the different machine where you have imported the signing certificate. Verify that the Java Control Panel’s security tab shows your deployment rule set. Verifying an individual JAR file or multiple JAR files You can test a certificate chain by using the jarsigner command. jarsigner -verify filename.jar If the output does not say "jar verified" then run the following command to see why: jarsigner -verify -verbose -certs filename.jar Check the output for the term “CertPath not validated.”

    Read the article

  • Network really slow with TL-WN951N wireless card

    - by Sam
    I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

  • Animating Tile with Blitting taking up Memory.

    - by Kid
    I am trying to animate a specific tile in my 2d Array, using blitting. The animation consists of three different 16x16 sprites in a tilesheet. Now that works perfect with the code below. BUT it's causing memory leakage. Every second the FlashPlayer is taking up +140 kb more in memory. What part of the following code could possibly cause the leak: //The variable Rectangle finds where on the 2d array we should clear the pixels //Fillrect follows up by setting alpha 0 at that spot before we copy in nxt Sprite //Tiletype is a variable that holds what kind of tile the next tile in animation is //(from tileSheet) //drawTile() gets Sprite from tilesheet and copyPixels it into right position on canvas public function animateSprite():void{ tileGround.bitmapData.lock(); if(anmArray[0].tileType > 42){ anmArray[0].tileType = 40; frameCount = 0; } var rect:Rectangle = new Rectangle(anmArray[0].xtile * ts, anmArray[0].ytile * ts, ts, ts); tileGround.bitmapData.fillRect(rect, 0); anmArray[0].tileType = 40 + frameCount; drawTile(anmArray[0].tileType, anmArray[0].xtile, anmArray[0].ytile); frameCount++; tileGround.bitmapData.unlock(); } public function drawTile(spriteType:int, xt:int, yt:int):void{ var tileSprite:Bitmap = getImageFromSheet(spriteType, ts); var rec:Rectangle = new Rectangle(0, 0, ts, ts); var pt:Point = new Point(xt * ts, yt * ts); tileGround.bitmapData.copyPixels(tileSprite.bitmapData, rec, pt, null, null, true); } public function getImageFromSheet(spriteType:int, size:int):Bitmap{ var sheetColumns:int = tSheet.width/ts; var col:int = spriteType % sheetColumns; var row:int = Math.floor(spriteType/sheetColumns); var rec:Rectangle = new Rectangle(col * ts, row * ts, size, size); var pt:Point = new Point(0,0); var correctTile:Bitmap = new Bitmap(new BitmapData(size, size, false, 0)); correctTile.bitmapData.copyPixels(tSheet, rec, pt, null, null, true); return correctTile; }

    Read the article

  • Why does the MaxReceiveMessageSize in WCF matter in case of Streaming

    The default value of MaxReceiveMessageSize in WCF is 65,536.  When you choose streaming as TransferMode, WCF runtime will create 8192 as buffer size. So what happened now is that WCF channel stack will read the first 8192 bytes, and decode the first couple of bytes as the size of the entire envelope. Then we will do a size check, and send back fault if the actual size exceeds the limit.   According to MSDN documentation, the MaxReceiveMessageSize is something that prevents a DOS attack,...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • What is the significance of '*' (star, asterisk) in the file listing results?

    - by vfclists
    I have noticed that some of my files have an asterisk at end. Does the asterisk at the end have any particular significance? I think they are mostly executable and displayed in green by the ls command. You will see that ./bkmp* and ./bkmp0* have an asterisk at the end. They are executable bash scripts. Here's my output: drwxr-xr-x 7 username username 4096 Oct 2 18:28 ./ drwxr-xr-x 8 root root 4096 Oct 2 09:25 ../ -rw-r--r-- 1 username username 3724 Sep 22 03:06 .bashrc -rwxr--r-- 1 username username 319 Sep 22 03:42 .bkmp* -rwxr--r-- 1 username username 324 Sep 29 23:30 .bkmp0* drwx------ 2 username username 4096 Sep 17 13:52 .cache/ -rw-r--r-- 1 username username 675 Sep 17 13:37 .profile drwx------ 2 username username 4096 Sep 22 10:10 .ssh/ drwx------ 2 username username 4096 Sep 24 19:49 .ssh.local/ drwxr-xr-x 2 username username 4096 Sep 22 04:10 archives/ drwxr-xr-x 3 username username 4096 Sep 24 19:51 home/ -rw-r--r-- 1 username username 27511 Sep 24 19:51 username_backup.20120924_1908.tar.gz

    Read the article

  • Remote synchronization

    - by Tomas Mysik
    Hi all, today we would like to show you another improvement we have prepared for NetBeans 7.2. Today, let's talk a little bit about remote synchronization. If you already use our simple (S)FTP client, this enhancement could be useful for you. Simply right click on Source Files and select Synchronize. Please notice that the remote synchronization works better only on the whole project (it means that the Source Files must be selected). The Synchronize action is also available on individual files (more files can be selected at once) but the suggested operation (download, upload etc.) does not work so precisely. Also please notice that the suggested operations are not 100% reliable since the timestamps provided by FTP servers are not exact. Once the remote files (their names and paths only, of course) are fetched, the main dialog appears: As you can see, NetBeans tries to suggest you operations (upload, download etc.) which should be done for each individual file of your project. If you are interested only in some particular changes, you can simply filter the list: Since we have a file conflict, we need to resolve it first. Fortunately this is very easy because we just select the desired file and click the Diff button . The remote version of our file is downloaded and compared with the local version. The resut is displayed in the dialog where you can easily apply and/or refuse the remote changes or even simply type manually to the local version of the selected file: Once we are done with our changes, the operation for the selected file changes to Upload and the file is marked with * (since we made some changes). Please notice that if you now click the Cancel button, in fact no changes are done in our local file. As you can see, if we have one or more files selected, we can change their operation to: no operation (file won't be synchronized) download upload delete (both local and remote file) reset (the operation is resetted to the original one suggested by NetBeans and also all changes done via Diff action are discarded) Now we are ready to synchronize our project. NetBeans will show us the synchronization summary (this dialog can be omitted, see the Show Summary checkbox on the previous image). The synchronization itself starts and we can see its progress and of course its result. As always, all the operations can be reviewed in the Output window. That's all for today, as always, please test it and report all the issues or enhancements you find in NetBeans BugZilla (component php, subcomponent FTP support).

    Read the article

  • Easy Profiling Point Insertion

    - by Geertjan
    One really excellent feature of NetBeans IDE is its Profiler. What's especially cool is that you can analyze code fragments, that is, you can right-click in a Java file and then choose Profiling | Insert Profiling Point. When you do that, you're able to analyze code fragments, i.e., from one statement to another statement, e.g., how long a particular piece of code takes to execute: https://netbeans.org/kb/docs/java/profiler-profilingpoints.html However, right-clicking a Java file and then going all the way down a longish list of menu items, to find "Profiling", and then "Insert Profiling Point" is a lot less easy than right-clicking in the sidebar (known as the glyphgutter) and then setting a profiling point in exactly the same way as a breakpoint: That's much easier and more intuitive and makes it far more likely that I'll use the Profiler at all. Once profiling points have been set then, as always, another menu item is added for managing the profiling point: To achieve this, I added the following to the "layer.xml" file: <folder name="Editors"> <folder name="AnnotationTypes"> <file name="profiler.xml" url="profiler.xml"/> <folder name="ProfilerActions"> <file name="org-netbeans-modules-profiler-ppoints-ui-InsertProfilingPointAction.shadow"> <attr name="originalFile" stringvalue="Actions/Profile/org-netbeans-modules-profiler-ppoints-ui-InsertProfilingPointAction.instance"/> <attr name="position" intvalue="300"/> </file> </folder> </folder> </folder> Notice that a "profiler.xml" file is referred to in the above, in the same location as where the "layer.xml" file is found. Here is the content: <!DOCTYPE type PUBLIC '-//NetBeans//DTD annotation type 1.1//EN' 'http://www.netbeans.org/dtds/annotation-type-1_1.dtd'> <type name='editor-profiler' description_key='HINT_PROFILER' localizing_bundle='org.netbeans.eppi.Bundle' visible='true' type='line' actions='ProfilerActions' severity='ok' browseable='false'/> Only disadvantage is that this registers the profiling point insertion in the glyphgutter for all file types. But that's true for the debugger too, i.e., there's no MIME type specific glyphgutter, instead, it is shared by all MIME types. Little bit confusing that the profiler point insertion can now, in theory, be set for all MIME types, but that's also true for the debugger, even though it doesn't apply to all MIME types. That probably explains why the profiling point insertion can only be done, officially, from the right-click popup menu of Java files, i.e., the developers wanted to avoid confusion and make it available to Java files only. However, I think that, since I'm already aware that I can't set the Java debugger in an HTML file, I'm also aware that the Java profiler can't be set that way as well. If you find this useful too, you can download and install the NBM from here: http://plugins.netbeans.org/plugin/55002

    Read the article

  • Mobile BI Comes of Age

    - by rich.clayton(at)oracle.com
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} One of the hot topics in the Business Intelligence industry is mobility.  More specifically the question is how business can be transformed by the iPhone and the iPad.  In June 2003, Gartner predicted that Mobile BI would be obsolete and that the technology was headed for the 'trough of disillusionment'.  I agreed with them at that time.  Many vendors like MicroStrategy and Business Objects jumped into the fray attempting to show how PDA's like Palm Pilots could be integrated with BI.  Their investments resulted in interesting demos with no commercial traction.  Why, because wireless networks and mobile operating systems were primitive, immature and slow. In my opinion, Apple's iOS has changed everything in Mobile BI.  Yes Blackberry, Android and Symbian and all the rest have their place in the market but I believe that increasingly consumers (not IT departments) influence BI decision making processes.  Consumers are choosing the iPhone and the iPad. The number of iPads I see in business meetings now is staggering.  Some use it for email and note taking and others are starting to use corporate applications.  The possibilities for Mobile BI are countless and I would expect to see iPads enterprise-wide over the next few years.   These new devices will provide just-in-time access to critical business information.  Front-line managers interacting with customers, suppliers, patients or citizens will have information literally at their fingertips. I've experimented with several mobile BI tools.  They look cool but like their Executive Information System (EIS) predecessors of the 1990's these tools lack a backbone and a plausible integration strategy.  EIS was a viral technology in the early 1990's.  Executives from every industry and job function were showcasing their dashboards to fellow co-workers and colleagues at the country club.  Just like the iPad, every senior manager wanted one.  EIS wasn't a device however, it was a software application.   EIS quickly faded into the software sunset as it lacked integration with corporate information systems.  BI servers  replaced EIS because the technology focused on the heavy data lifting of integrating, normalizing, aggregating and managing large, complex data volumes.  The devices are here to stay. The cute stand-alone mobile BI tools, not so much. If all you're looking to do is put Excel files on your iPad, there are plenty of free tools on the market.  You'll look cool at your next management meeting but after a few weeks, the cool factor will fade away and you'll be wondering how you will ever maintain it.  If however you want secure, consistent, reliable information on your iPad, you need an integration strategy and a way to model the data.  BI Server technologies like the Oracle BI Foundation is a market leading approach to tackle that issue. I liken the BI mobility frenzy to buying classic cars.  Classic Cars have two buying groups - teenagers and middle-age folks looking to tinker.  Teenagers look at the pin-stripes and the paint job while middle-agers (like me)  kick the tires a bit and look under the hood to check out the quality and reliability of the engine.  Mobile BI tools sure look sexy but don't go very far without an engine and a transmission or an integration strategy. The strategic question in Mobile BI is can these startups build a motor and transmission faster than Oracle can re-paint the car?  Oracle has a great engine and a transmission that connects to all enterprise information assets.  We're working on the new paint job and are excited about the possibilities.  Just as vertical integration worked in the automotive business, it too works in the technology industry.

    Read the article

  • How do I calculate the boundary of the game window after transforming the view?

    - by Cypher
    My Camera class handles zoom, rotation, and of course panning. It's invoked through SpriteBatch.Begin, like so many other XNA 2D camera classes. It calculates the view Matrix like so: public Matrix GetViewMatrix() { return Matrix.Identity * Matrix.CreateTranslation(new Vector3(-this.Spatial.Position, 0.0f)) * Matrix.CreateTranslation(-( this.viewport.Width / 2 ), -( this.viewport.Height / 2 ), 0.0f) * Matrix.CreateRotationZ(this.Rotation) * Matrix.CreateScale(this.Scale, this.Scale, 1.0f) * Matrix.CreateTranslation(this.viewport.Width * 0.5f, this.viewport.Height * 0.5f, 0.0f); } I was having a minor issue with performance, which after doing some profiling, led me to apply a culling feature to my rendering system. It used to, before I implemented the camera's zoom feature, simply grab the camera's boundaries and cull any game objects that did not intersect with the camera. However, after giving the camera the ability to zoom, that no longer works. The reason why is visible in the screenshot below. The navy blue rectangle represents the camera's boundaries when zoomed out all the way (Camera.Scale = 0.5f). So, when zoomed out, game objects are culled before they reach the boundaries of the window. The camera's width and height are determined by the Viewport properties of the same name (maybe this is my mistake? I wasn't expecting the camera to "resize" like this). What I'm trying to calculate is a Rectangle that defines the boundaries of the screen, as indicated by my awesome blue arrows, even after the camera is rotated, scaled, or panned. Here is how I've more recently found out how not to do it: public Rectangle CullingRegion { get { Rectangle region = Rectangle.Empty; Vector2 size = this.Spatial.Size; size *= 1 / this.Scale; Vector2 position = this.Spatial.Position; position = Vector2.Transform(position, this.Inverse); region.X = (int)position.X; region.Y = (int)position.Y; region.Width = (int)size.X; region.Height = (int)size.Y; return region; } } It seems to calculate the right size, but when I render this region, it moves around which will obviously cause problems. It needs to be "static", so to speak. It's also obscenely slow, which causes more of a problem than it solves. What am I missing?

    Read the article

  • Ubuntu 12.04.1 LTS USB not being detected after formatting with Startup Disk Creator

    - by Zach
    sudo fdisk -l lists the drive, however, I cannot find it in the file explorer. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d871e Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris Disk /dev/sdb: 8195 MB, 8195480064 bytes 253 heads, 62 sectors/track, 1020 cylinders, total 16006797 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027ae4 Device Boot Start End Blocks Id System /dev/sdb1 * 62 15999719 M 7999829 c W95 FAT32 (LBA) Manually mounting it produces this error message :~$ sudo mount -t vfat /dev/sdb1 /media/external -ouiduid=1000,gid=1000,utf8,dmask=027,fmask=137 mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Is the usb toast?

    Read the article

  • How to mount an external HDD?

    - by Slash
    I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

    Read the article

  • How the number of indexes built on a table can impact performances?

    - by Davide Mauri
    We all know that putting too many indexes (I’m talking of non-clustered index only, of course) on table may produce performance problems due to the overhead that each index bring to all insert/update/delete operations on that table. But how much? I mean, we all agree – I think – that, generally speaking, having many indexes on a table is “bad”. But how bad it can be? How much the performance will degrade? And on a concurrent system how much this situation can also hurts SELECT performances? If SQL Server take more time to update a row on a table due to the amount of indexes it also has to update, this also means that locks will be held for more time, slowing down the perceived performance of all queries involved. I was quite curious to measure this, also because when teaching it’s by far more impressive and effective to show to attended a chart with the measured impact, so that they can really “feel” what it means! To do the tests, I’ve create a script that creates a table (that has a clustered index on the primary key which is an identity column) , loads 1000 rows into the table (inserting 1000 row using only one insert, instead of issuing 1000 insert of one row, in order to minimize the overhead needed to handle the transaction, that would have otherwise ), and measures the time taken to do it. The process is then repeated 16 times, each time adding a new index on the table, using columns from table in a round-robin fashion. Test are done against different row sizes, so that it’s possible to check if performance changes depending on row size. The result are interesting, although expected. This is the chart showing how much time it takes to insert 1000 on a table that has from 0 to 16 non-clustered indexes. Each test has been run 20 times in order to have an average value. The value has been cleaned from outliers value due to unpredictable performance fluctuations due to machine activity. The test shows that in a  table with a row size of 80 bytes, 1000 rows can be inserted in 9,05 msec if no indexes are present on the table, and the value grows up to 88 (!!!) msec when you have 16 indexes on it This means a impact on performance of 975%. That’s *huge*! Now, what happens if we have a bigger row size? Say that we have a table with a row size of 1520 byte. Here’s the data, from 0 to 16 indexes on that table: In this case we need near 22 msec to insert 1000 in a table with no indexes, but we need more that 500msec if the table has 16 active indexes! Now we’re talking of a 2410% impact on performance! Now we can have a tangible idea of what’s the impact of having (too?) many indexes on a table and also how the size of a row also impact performances. That’s why the golden rule of OLTP databases “few indexes, but good” is so true! (And in fact last week I saw a database with tables with 1700bytes row size and 23 (!!!) indexes on them!) This also means that a too heavy denormalization is really not a good idea (we’re always talking about OLTP systems, keep it in mind), since the performance get worse with the increase of the row size. So, be careful out there, and keep in mind the “equilibrium” is the key world of a database professional: equilibrium between read and write performance, between normalization and denormalization, between to few and too may indexes. PS Tests are done on a VMWare Workstation 7 VM with 2 CPU and 4 GB of Memory. Host machine is a Dell Precsioni M6500 with i7 Extreme X920 Quad-Core HT 2.0Ghz and 16Gb of RAM. Database is stored on a SSD Intel X-25E Drive, Simple Recovery Model, running on SQL Server 2008 R2. If you also want to to tests on your own, you can download the test script here: Open TestIndexPerformance.sql

    Read the article

  • How can I compact the VHD file with Ubuntu?

    - by AmShegar
    I use windows server 2008r2 with role Hyper-V. The guest system is Ubuntu 12.04 LTC. It is situated on the dynamic virtual hard disk. I want to compact this VHD (The real size is 50 GB, 360 GB on the disk). But I can not do this, because the Ubuntu file system is not NTFS. What do I need (gparted, sdelete, ...) for solving this problem? The main problem is that the filesystem is not NTFS, but ext4.

    Read the article

  • How to setup ATI Mobility Radeon HD 4650?

    - by Thi An
    I'm currently using Ubuntu 12.04 64bit. After installing ATI/AMD proprietary FGLRX graphics drivers via Additional Drivers, I checked the status of my VGA card using lspci -v. Here's the output: 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI M96 [Mobility Radeon HD 4650] (prog-if 00 [VGA controller]) Subsystem: Dell Device 0456 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at d0000000 (32-bit, prefetchable) [size=256M] I/O ports at 2000 [size=256] Memory at cfef0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at cfe00000 [disabled] [size=128K] Capabilities: Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon As mentioned in the title, my VGA card is 1GB and yet my computer only recognizes 256MB. My question is: "How to make my computer fully recognize the capacity of my ATI Mobility Radeon HD 4650 (1GB)?"

    Read the article

  • PhP Login/Register system [migrated]

    - by Marian
    I found this good tutorial on creating a login/register system using PhP and MySQL. The forum is around 5 years old (edited last year) but it can still be usefull. Beginner Simple Register-Login system There seems to be an issue with both login and register pages. <?php function register_form(){ $date = date('D, M, Y'); echo "<form action='?act=register' method='post'>" ."Username: <input type='text' name='username' size='30'><br>" ."Password: <input type='password' name='password' size='30'><br>" ."Confirm your password: <input type='password' name='password_conf' size='30'><br>" ."Email: <input type='text' name='email' size='30'><br>" ."<input type='hidden' name='date' value='$date'>" ."<input type='submit' value='Register'>" ."</form>"; } function register(){ $connect = mysql_connect("host", "username", "password"); if(!$connect){ die(mysql_error()); } $select_db = mysql_select_db("database", $connect); if(!$select_db){ die(mysql_error()); } $username = $_REQUEST['username']; $password = $_REQUEST['password']; $pass_conf = $_REQUEST['password_conf']; $email = $_REQUEST['email']; $date = $_REQUEST['date']; if(empty($username)){ die("Please enter your username!<br>"); } if(empty($password)){ die("Please enter your password!<br>"); } if(empty($pass_conf)){ die("Please confirm your password!<br>"); } if(empty($email)){ die("Please enter your email!"); } $user_check = mysql_query("SELECT username FROM users WHERE username='$username'"); $do_user_check = mysql_num_rows($user_check); $email_check = mysql_query("SELECT email FROM users WHERE email='$email'"); $do_email_check = mysql_num_rows($email_check); if($do_user_check > 0){ die("Username is already in use!<br>"); } if($do_email_check > 0){ die("Email is already in use!"); } if($password != $pass_conf){ die("Passwords don't match!"); } $insert = mysql_query("INSERT INTO users (username, password, email) VALUES ('$username', '$password', '$email')"); if(!$insert){ die("There's little problem: ".mysql_error()); } echo $username.", you are now registered. Thank you!<br><a href=login.php>Login</a> | <a href=index.php>Index</a>"; } switch($act){ default; register_form(); break; case "register"; register(); break; } ?> Once pressed the register button the page does nothing, fields are erased and no data is added inside the database or error given. I tought that the problem might be the switch($act){ part so I removed it and changed the page using a require require('connect.php'); where connect.php is <?php mysql_connect("localhost","host","password"); mysql_select_db("database"); ?> Removed the function register_form(){ and echo part turning it into an HTML code: <form action='register' method='post'> Username: <input type='text' name='username' size='30'><br> Password: <input type='password' name='password' size='30'><br> Confirm your password: <input type='password' name='password_conf' size='30'><br> Email: <input type='text' name='email' size='30'><br> <input type='hidden' name='date' value='$date'> <input type='submit' name="register" value='Register'> </form> And instead of having a function register(){ I replaced it with a if($register){ So when the Register button is pressed it runs the php code, but this edit doesn't seem to work either. So what can the problem be? If needed I can re-add this code on my Domain The login page has the same issue, nothing happens when the button is pressed beside emptying the fields.

    Read the article

  • Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

    - by Victor S
    I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

    Read the article

  • WPF: Running code when Window rendering is completed

    - by Ilya Verbitskiy
    WPF is full of surprises. It makes complicated tasks easier, but at the same time overcomplicates easy  task as well. A good example of such overcomplicated things is how to run code when you’re sure that window rendering is completed. Window Loaded event does not always work, because controls might be still rendered. I had this issue working with Infragistics XamDockManager. It continued rendering widgets even when the Window Loaded event had been raised. Unfortunately there is not any “official” solution for this problem. But there is a trick. You can execute your code asynchronously using Dispatcher class.   Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null);   This code should be added to your Window Loaded event handler. It is executed when all controls inside your window are rendered. I created a small application to prove this idea. The application has one window with a few buttons. Each button logs when it has changed its actual size. It also logs when Window Loaded event is raised, and, finally, when rendering is completed. Window’s layout is straightforward.   1: <Window x:Class="OnRendered.MainWindow" 2: xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" 3: xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" 4: Title="Run the code when window rendering is completed." Height="350" Width="525" 5: Loaded="OnWindowLoaded"> 6: <Window.Resources> 7: <Style TargetType="{x:Type Button}"> 8: <Setter Property="Padding" Value="7" /> 9: <Setter Property="Margin" Value="5" /> 10: <Setter Property="HorizontalAlignment" Value="Center" /> 11: <Setter Property="VerticalAlignment" Value="Center" /> 12: </Style> 13: </Window.Resources> 14: <StackPanel> 15: <Button x:Name="Button1" Content="Button 1" SizeChanged="OnSizeChanged" /> 16: <Button x:Name="Button2" Content="Button 2" SizeChanged="OnSizeChanged" /> 17: <Button x:Name="Button3" Content="Button 3" SizeChanged="OnSizeChanged" /> 18: <Button x:Name="Button4" Content="Button 4" SizeChanged="OnSizeChanged" /> 19: <Button x:Name="Button5" Content="Button 5" SizeChanged="OnSizeChanged" /> 20: </StackPanel> 21: </Window>   SizeChanged event handler simply traces that the event has happened.   1: private void OnSizeChanged(object sender, SizeChangedEventArgs e) 2: { 3: Button button = (Button)sender; 4: Trace.WriteLine("Size has been changed", button.Name); 5: }   Window Loaded event handler is slightly more interesting. First it scheduler the code to be executed using Dispatcher class, and then logs the event.   1: private void OnWindowLoaded(object sender, RoutedEventArgs e) 2: { 3: Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null); 4: Trace.WriteLine("Loaded", "Window"); 5: }   As the result I had seen these trace messages.   1: Button5: Size has been changed 2: Button4: Size has been changed 3: Button3: Size has been changed 4: Button2: Size has been changed 5: Button1: Size has been changed 6: Window: Loaded 7: Rendering: DONE!   You can find the solution in GitHub.

    Read the article

  • Ubuntu missing from the Grub menu

    - by varevarao
    Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

    Read the article

  • SQL SERVER – SSAS – Multidimensional Space Terms and Explanation

    - by pinaldave
    I was presenting on SQL Server session at one of the Tech Ed On Road event in India. I was asked very interesting question during ‘Stump the Speaker‘ session. I am sharing the same with all of you over here. Question: Can you tell me in simple words what is dimension, member and other terms of multidimensional space? There is no simple example for it. This is extreme fundamental question if you know Analysis Service. Those who have no exposure to the same and have not yet started on this subject, may find it a bit difficult. I really liked his question so I decided to answer him there as well blog about the same over here. Answer: Here are the most important terms of multidimensional space – dimension, member, value, attribute and size. Dimension – It describes the point of interests for analysis. Member – It is one of the point of interests in the dimension. Value – It uniquely describes the member. Attribute – It is collection of multiple members. Size – It is total numbers for any dimension. Let us understand this further detail taking example of any space. I am going to take example of distance as a space in our example. Dimension – Distance is a dimension for us. Member – Kilometer – We can measure distance in Kilometer. Value – 4 – We can measure distance in the kilometer unit and the value of the unit can be 4. Attribute – Kilometer, Miles, Meter – The complete set of members is called attribute. Size – 100 KM – The maximum size decided for the dimension is called size. The same example can be also defined by using time space. Here is the example using time space. Dimension – Time Member – Date Value – 25 Attribute – 1, 2, 3…31 Size – 31 I hope it is clear enough that what are various multidimensional space and its terms. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Business Intelligence, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

< Previous Page | 630 631 632 633 634 635 636 637 638 639 640 641  | Next Page >