Search Results

Search found 16598 results on 664 pages for 'device center'.

Page 637/664 | < Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• How do I add xen kernel boot parameters in grub2?

  - by Matt

  I know that I can add command line parameters to the grub2 command line by editing /etc/default/grub according to this answer How do I add a boot parameter to grub2 in Ubuntu 10.10? However, that would apply to ALL kernels would it not? How do I apply the command line parameters to specific kernels? i.e. only xen. I'm wanting to append something like: xen-pciback.hide=(06:00.0) I'm guessing I need to add it somewhere in the file: /etc/grub.d/20_linux_xen Which contains: #! /bin/sh set -e # grub-mkconfig helper script. # Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc. # # GRUB is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # GRUB is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GRUB. If not, see <http://www.gnu.org/licenses/>. prefix=/usr exec_prefix=${prefix} bindir=${exec_prefix}/bin libdir=${exec_prefix}/lib . ${libdir}/grub/grub-mkconfig_lib export TEXTDOMAIN=grub export TEXTDOMAINDIR=${prefix}/share/locale CLASS="--class gnu-linux --class gnu --class os --class xen" if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR} GNU/Linux" CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr '[A-Z]' '[a-z]' | cut -d' ' -f1) ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but # the initrds that Linux uses don't like that. case ${GRUB_DEVICE} in /dev/loop/*|/dev/loop[0-9]) GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"` # We can't cope with devices loop-mounted from files here. case ${GRUB_DEVICE} in /dev/*) ;; *) exit 0 ;; esac ;; esac if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \ || ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \ || uses_abstraction "${GRUB_DEVICE}" lvm; then LINUX_ROOT_DEVICE=${GRUB_DEVICE} else LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID} fi linux_entry () { os="$1" version="$2" xen_version="$3" recovery="$4" args="$5" xen_args="$6" if ${recovery} ; then title="$(gettext_quoted "%s, with Xen %s and Linux %s (recovery mode)")" else title="$(gettext_quoted "%s, with Xen %s and Linux %s")" fi printf "menuentry '${title}' ${CLASS} {\n" "${os}" "${xen_version}" "${version}" if ! ${recovery} ; then save_default_entry | sed -e "s/^/\t/" fi if [ -z "${prepare_boot_cache}" ]; then prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | sed -e "s/^/\t/")" fi printf '%s\n' "${prepare_boot_cache}" xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})" lmessage="$(gettext_printf "Loading Linux %s ..." ${version})" cat << EOF echo '$xmessage' multiboot ${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} echo '$lmessage' module ${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args} EOF if test -n "${initrd}" ; then message="$(gettext_printf "Loading initial ramdisk ...")" cat << EOF echo '$message' module ${rel_dirname}/${initrd} EOF fi cat << EOF } EOF } linux_list=`for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* ; do basename=$(basename $i) version=$(echo $basename | sed -e "s,^[^0-9]*-,,g") if grub_file_is_not_garbage "$i" && grep -qx "CONFIG_XEN_DOM0=y" /boot/config-${version} 2> /dev/null ; then echo -n "$i " ; fi done` xen_list=`for i in /boot/xen*; do if grub_file_is_not_garbage "$i" ; then echo -n "$i " ; fi done` prepare_boot_cache= while [ "x${xen_list}" != "x" ] ; do list="${linux_list}" current_xen=`version_find_latest $xen_list` xen_basename=`basename ${current_xen}` xen_dirname=`dirname ${current_xen}` rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname` xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"` echo "submenu \"Xen ${xen_version}\" {" while [ "x$list" != "x" ] ; do linux=`version_find_latest $list` echo "Found linux image: $linux" >&2 basename=`basename $linux` dirname=`dirname $linux` rel_dirname=`make_system_path_relative_to_its_root $dirname` version=`echo $basename | sed -e "s,^[^0-9]*-,,g"` alt_version=`echo $version | sed -e "s,\.old$,,g"` linux_root_device_thisversion="${LINUX_ROOT_DEVICE}" initrd= for i in "initrd.img-${version}" "initrd-${version}.img" \ "initrd-${version}" "initrd.img-${alt_version}" \ "initrd-${alt_version}.img" "initrd-${alt_version}"; do if test -e "${dirname}/${i}" ; then initrd="$i" break fi done if test -n "${initrd}" ; then echo "Found initrd image: ${dirname}/${initrd}" >&2 else # "UUID=" magic is parsed by initrds. Since there's no initrd, it can't work here. linux_root_device_thisversion=${GRUB_DEVICE} fi linux_entry "${OS}" "${version}" "${xen_version}" false \ "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}" if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then linux_entry "${OS}" "${version}" "${xen_version}" true \ "single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}" fi list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '` done echo "}" xen_list=`echo $xen_list | tr ' ' '\n' | grep -vx $current_xen | tr '\n' ' '` done

  Read the article

• OpenVPN stopped working, what could have happened?

  - by jaja

  I have Openvpn, and it worked great when I used it on PC (Windows 8), then I copied all files (Certificates and config) to an Android 4 phone to use them. Now, Openvpn works on the phone, but not the PC. Specifically, when I open Google I get: The server at www.google.com can't be found, because the DNS lookup failed, but the VPN seems to be connected. I have a simple question, could the problem be because I copied the same files? Routing table before connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 =========================================================================== Routing table after connecting:- IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.101 25 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 **.**.***.** 255.255.255.255 192.168.1.254 192.168.1.101 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.101 281 192.168.1.101 255.255.255.255 On-link 192.168.1.101 281 192.168.1.255 255.255.255.255 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.101 281 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.101 281 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Server conf:- port 1194 proto udp dev tun ca ca.crt cert myservername.crt key myservername.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 push "redirect-gateway def1" Client conf:- client dev tun proto udp remote 89.32.148.35 1194 resolv-retry infinite nobind persist-key persist-tun mute-replay-warnings ca ca.crt cert client1.crt key client1.key verb 3 comp-lzo redirect-gateway def1 Here is the log file:- Tue Dec 18 16:34:27 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Tue Dec 18 16:34:27 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Tue Dec 18 16:34:27 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Tue Dec 18 16:34:27 2012 LZO compression initialized Tue Dec 18 16:34:27 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Tue Dec 18 16:34:27 2012 Socket Buffers: R=[65536-65536] S=[65536-65536] Tue Dec 18 16:34:27 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Tue Dec 18 16:34:27 2012 Local Options hash (VER=V4): '41690919' Tue Dec 18 16:34:27 2012 Expected Remote Options hash (VER=V4): '530fdded' Tue Dec 18 16:34:27 2012 UDPv4 link local: [undef] Tue Dec 18 16:34:27 2012 UDPv4 link remote: ..*.:1194 Tue Dec 18 16:34:27 2012 TLS: Initial packet from ..*.:1194, sid=4d1496ad 2079a5fa Tue Dec 18 16:34:28 2012 VERIFY OK: depth=1, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:28 2012 VERIFY OK: depth=0, /C=/ST=/L=/O=/OU=/CN=/name=/emailAddress= Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Tue Dec 18 16:34:29 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Dec 18 16:34:29 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Tue Dec 18 16:34:29 2012 [myservername] Peer Connection Initiated with ..*.:1194 Tue Dec 18 16:34:32 2012 SENT CONTROL [myservername]: 'PUSH_REQUEST' (status=1) Tue Dec 18 16:34:32 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: timers and/or timeouts modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: --ifconfig/up options modified Tue Dec 18 16:34:32 2012 OPTIONS IMPORT: route options modified Tue Dec 18 16:34:32 2012 ROUTE default_gateway=192.168.1.254 Tue Dec 18 16:34:32 2012 TAP-WIN32 device [Local Area Connection] opened: \.\Global{F0CFEBBF-9B1B-4CFB-8A82-027330974C30}.tap Tue Dec 18 16:34:32 2012 TAP-Win32 Driver Version 9.9 Tue Dec 18 16:34:32 2012 TAP-Win32 MTU=1500 Tue Dec 18 16:34:32 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} [DHCP-serv: 10.8.0.5, lease-time: 31536000] Tue Dec 18 16:34:32 2012 Successful ARP Flush on interface [26] {F0CFEBBF-9B1B-4CFB-8A82-027330974C30} Tue Dec 18 16:34:37 2012 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD ..*. MASK 255.255.255.255 192.168.1.254 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=25 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 C:\WINDOWS\system32\route.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5 Tue Dec 18 16:34:37 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Tue Dec 18 16:34:37 2012 Route addition via IPAPI succeeded [adaptive] Tue Dec 18 16:34:37 2012 Initialization Sequence Completed

  Read the article

• Mac won't boot into safe mode

  - by Stephen

  Mac boots fine normally, except when in safe mode. Holding down shift when booting gets me to the progress bar on the grey screen. Progress bar gets about half way before mac reboots. I modified nvram boot-args to get a better look: sudo nvram boot-args="-x -v" It definitely gets through fsck, skips loading kernel extensions (since it's in safe mode), does something with the network interfaces, then this is the last thing it wips through... Aug 22 11:56:21 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client '/usr/libexec/UserEventAgent' [10] for authorization created by '/usr/libexec/UserEventAgent' [10] (100012,0) Aug 22 11:56:22 Crockpot fseventsd[37]: event logs in /.fseventsd out of sync with volume. destroying old logs. (1 174 330) Aug 22 11:56:22 Crockpot fseventsd[37]: log dir: /.fseventsd getting new uuid: 5C379650-26FA-428F-B81F-4FE4349D50B3 Aug 22 11:56:23 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12 Aug 22 11:56:23 Crockpot systemkeychain[35]: done file: /var/run/systemkeychaincheck.done Aug 22 11:56:23 Crockpot configd[17]: network changed: DNS* Aug 22 11:56:24 --- last message repeated 1 time --- Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2D_IPC: Loaded Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2DInitialize succeeded Aug 22 11:56:24 Crockpot mDNSResponder[39]: Adding registration domain 273025955.members.btmm.icloud.com. Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe MAC AUTH succeeded Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe Unsolicited Auth Aug 22 11:56:24 Crockpot kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0 Aug 22 11:56:24 Crockpot kernel[0]: AirPort: Link Up on en1 Aug 22 11:56:24 Crockpot kernel[0]: en1: BSSID changed to 00:23:69:35:dc:fe Aug 22 11:56:24 Crockpot kernel[0]: en1::IO80211Interface::postMessage bssid changed Aug 22 11:56:24 Crockpot kernel[0]: AirPort: RSN handshake complete on en1 Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences failed to read preferences data. Errno was 21 Aug 22 11:56:25 --- last message repeated 1 time --- Aug 22 11:56:25 Crockpot airportd[30]: _doAutoJoin: Already associated to “burnum”. Bailing on auto-join. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Can't load IOBluetoothSerialManager.kext - ineligible during safe boot. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel. Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences: error renaming file blued.plist.HXuEmQn to blued.plist. Aug 22 11:56:27 Crockpot awacsd[52]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49) Aug 22 11:56:27 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'system.services.systemconfiguration.network' by client '/System/Library/Frameworks/SystemConfiguration.framework/Versions/A/Resources/SCHelper' [54] for authorization created by '/usr/sbin/awacsd' [52] (100003,0) Aug 22 11:56:27 --- last message repeated 1 time --- Aug 22 11:56:27 Crockpot awacsd[52]: Configuring lazy AWACS client: 273025955.p04.members.btmm.icloud.com. Aug 22 11:56:28 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:32 --- last message repeated 1 time --- Aug 22 11:56:32 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:38 --- last message repeated 1 time --- Aug 22 11:56:38 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:47 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:49 Crockpot configd[17]: subnet_route: write routing socket failed, Network is unreachable Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1+:169.254.80.161) DNS* Proxy+ SMB Aug 22 11:56:51 Crockpot UserEventAgent[10]: Captive: en1: Not probing 'burnum' (protected network) Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1:169.254.80.161) DNS Proxy SMB Aug 22 11:57:07 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:57:23 Crockpot fseventsd[37]: Logging disabled completely for device:1: /Volumes/Recovery HD Aug 22 11:57:25 Crockpot kernel[0]: Kext loading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kext unloading now disabled. Aug 22 11:57:25 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) stopping Aug 22 11:57:25 Crockpot com.apple.SecurityServer[15]: Killing auth hosts Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot configd[17]: dnssd_clientstub read_all(26) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: [0x7fb025119ff0] SCNetworkReachability _llq_callback w/error=-65563 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2D_IPC: Terminated Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2DTerminate succeeded Aug 22 11:57:25 Crockpot awacsd[52]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 2 times --- Aug 22 11:57:25 Crockpot apsd[55]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: SCNC: stop, triggered by configd, type PPPSerial, reason Terminated All Aug 22 11:57:25 Crockpot configd[17]: _d2dCallback: D2D connection to mDNSResponder lost Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 4 times --- Aug 22 11:57:25 Crockpot kernel[0]: Kext autounloading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kernel requests now disabled. ... before rebooting in the middle of the safe mode startup sequence. Aug 22 12:01:10 localhost bootlog[0]: BOOT_TIME 1345662070 0 Aug 22 12:01:32 localhost kernel[0]: PMAP: PCID enabled Aug 22 12:01:32 localhost kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 Any ideas what's causing the safe mode boot to fail? System Info MacBook Pro 8,2 2.2 Ghz Core i7 4 GM Ram Mountain Lion 10.8 500GB TOSHIBA MK5065GSXF Serial-ATA rotational disk

  Read the article

• Why is the latency on one LVM volume consistently higher?

  - by David Schmitt

  I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• How does this main domain have a CNAME record?

  - by TRiG

  I was under the impression that only subdomains could have CNAME records: main domains need to define all their own records. However, apt-get.com seems to have only a CNAME record. How can this work? $ dig apt-get.com ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45743 ;; flags: qr rd ra; QUERY: 1, ANSWER: 9, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN A ;; ANSWER SECTION: apt-get.com. 86336 IN CNAME thie5ku9.dsgeneration.com. thie5ku9.dsgeneration.com. 60 IN A 208.73.211.242 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.246 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.166 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.232 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.161 thie5ku9.dsgeneration.com. 60 IN A 208.73.210.233 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.186 thie5ku9.dsgeneration.com. 60 IN A 208.73.211.188 ;; Query time: 59 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:05:48 2014 ;; MSG SIZE rcvd: 193 $ dig apt-get.com ns ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43831 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;apt-get.com. IN NS ;; Query time: 26 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue Jun 10 15:12:37 2014 ;; MSG SIZE rcvd: 29 $ dig apt-get.com ns @b.gtld-servers.net ; <<>> DiG 9.8.1-P1 <<>> apt-get.com ns @b.gtld-servers.net ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 38228 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 2, ADDITIONAL: 2 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;apt-get.com. IN NS ;; AUTHORITY SECTION: apt-get.com. 172800 IN NS ns1.domainrecover.com. apt-get.com. 172800 IN NS ns2.domainrecover.com. ;; ADDITIONAL SECTION: ns1.domainrecover.com. 172800 IN A 66.45.232.66 ns2.domainrecover.com. 172800 IN A 65.23.159.179 ;; Query time: 70 msec ;; SERVER: 192.33.14.30#53(192.33.14.30) ;; WHEN: Tue Jun 10 15:07:05 2014 ;; MSG SIZE rcvd: 111 The domain does resolve. I get the following headers: GET / HTTP/1.1 User-Agent: Testing_Sniffer/4.15 Host: apt-get.com Accept: */* HTTP/1.0 200 (OK) Cache-Control: private, no-cache, must-revalidate Connection: Keep-Alive Pragma: no-cache Server: Oversee Turing v1.0.0 Content-Length: 1347 Content-Type: text/html Expires: Mon, 26 Jul 1997 05:00:00 GMT Keep-Alive: timeout=3, max=96 P3P: policyref="http://www.dsparking.com/w3c/p3p.xml", CP="NOI DSP COR ADMa OUR NOR STA" Set-Cookie: parkinglot=1; domain=.apt-get.com; path=/; expires=Wed, 11-Jun-2014 14:10:37 GMT <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd"> <!-- turing_cluster_prod --> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>apt-get.com</title> <meta name="keywords" content="apt-get.com" /> <meta name="description" content="apt-get.com" /> <meta name="robots" content="index, follow" /> <meta name="revisit-after" content="10" /> <meta name="viewport" content="width=device-width, initial-scale=1.0" /> <script type="text/javascript"> document.cookie = "jsc=1"; </script> </head> <frameset rows="100%,*" frameborder="no" border="0" framespacing="0"> <frame src="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A" name="apt-get.com"> </frameset> <noframes> <body><a href="http://apt-get.com?epl=5PfLSSqWrYDAt-gbwMDK_rA3b1UJCYVTJHfxTzr9FTDQV84b6vAgVhU3FTeCRQNiuRNv79Ni0V3mkEVNRhpqo2gpMjp5iOIR1w2_EISPENaqzoXohVXl2QI3ryXlRCB4FaIIaxynnWXWY6QBgBgNiIZ6agD1NBoNGg0ajXpUCXUAIJDer78AAOB_AwAAQIDbCwAAe_NWlVlTJllBMTZoWkKPAAAA8A">Click here to go to apt-get.com</a>.</body> </noframes> </html>

  Read the article

• Why are my USB 2.0 devices crashing Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

  Read the article

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• Screen Casting using ffmpeg (too fast)

  - by rowman

  I can use ffmpeg to make screen casts: ffmpeg -f x11grab -s 1280x800 -i :0.0 -c:v libx264 -framerate 30 -r 30 -crf 18 out.mkv However the output comes out to be too fast paced. It also happens with GTK RecordMyDesktop if I enable the encode on the fly. So, the questions is how to get a normal video pace. Also in order to capture the sound with ffmpeg what option should be used? FFmpeg Output: ffmpeg -f x11grab -s 1280x800 -r 30 -i :0.0 -c:v libx264 -framerate 30 -r 30 -crf 18 out.mkv ffmpeg version N-35162-g87244c8 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 7 2012 15:56:19 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --enable-gpl --enable-libfaac --enable-libfdk-aac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-x11grab --enable-libx264 --enable-nonfree --enable-version3 libavutil 51. 73.102 / 51. 73.102 libavcodec 54. 64.100 / 54. 64.100 libavformat 54. 29.105 / 54. 29.105 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 19.102 / 3. 19.102 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 16.100 / 0. 16.100 libpostproc 52. 1.100 / 52. 1.100 [x11grab @ 0xab896a0] device: :0.0 -> display: :0.0 x: 0 y: 0 width: 1280 height: 800 [x11grab @ 0xab896a0] shared memory extension found [x11grab @ 0xab896a0] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0': Duration: N/A, start: 1350136942.608988, bitrate: 983040 kb/s Stream #0:0: Video: rawvideo (BGR[0] / 0x524742), bgr0, 1280x800, 983040 kb/s, 30 tbr, 1000k tbn, 30 tbc [libx264 @ 0xab87320] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 SlowCTZ SlowAtom [libx264 @ 0xab87320] profile High 4:4:4 Predictive, level 3.2, 4:4:4 8-bit [libx264 @ 0xab87320] 264 - core 128 r2 198a7ea - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=18.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf54.29.105 Stream #0:0: Video: h264, yuv444p, 1280x800, q=-1--1, 1k tbn, 30 tbc Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Press [q] to stop, [?] for help frame= 10 fps=0.0 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 19 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 28 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 37 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 45 fps= 16 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 47 fps= 14 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 52 fps= 13 q=24.0 size= 257kB time=00:00:00.00 bitrate=2101632.0kbiframe= 55 fps= 12 q=24.0 size= 257kB time=00:00:00.10 bitrate=20808.2kbitsframe= 59 fps= 11 q=24.0 size= 289kB time=00:00:00.23 bitrate=10145.0kbitsframe= 64 fps= 11 q=24.0 size= 289kB time=00:00:00.40 bitrate=5894.7kbits/frame= 70 fps= 11 q=24.0 size= 289kB time=00:00:00.60 bitrate=3933.1kbits/frame= 72 fps= 10 q=24.0 size= 289kB time=00:00:00.66 bitrate=3549.2kbits/frame= 77 fps=9.8 q=24.0 size= 289kB time=00:00:00.83 bitrate=2837.7kbits/frame= 80 fps=9.6 q=24.0 size= 289kB time=00:00:00.93 bitrate=2533.5kbits/frame= 85 fps=9.3 q=24.0 size= 289kB time=00:00:01.10 bitrate=2146.9kbits/frame= 89 fps=9.3 q=24.0 size= 289kB time=00:00:01.23 bitrate=1917.1kbits/frame= 92 fps=9.1 q=24.0 size= 289kB time=00:00:01.33 bitrate=1773.3kbits/frame= 96 fps=9.0 q=24.0 size= 289kB time=00:00:01.46 bitrate=1612.4kbits/frame= 99 fps=8.8 q=24.0 size= 321kB time=00:00:01.56 bitrate=1676.8kbits/frame= 104 fps=8.7 q=24.0 size= 321kB time=00:00:01.73 bitrate=1515.2kbits/frame= 109 fps=5.3 q=24.0 Lsize= 1093kB time=00:00:03.56 bitrate=2511.5kbits/s video:1092kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.120198% [libx264 @ 0xab87320] frame I:3 Avg QP:18.93 size:142610 [libx264 @ 0xab87320] frame P:43 Avg QP:20.79 size: 15751 [libx264 @ 0xab87320] frame B:63 Avg QP:23.75 size: 195 [libx264 @ 0xab87320] consecutive B-frames: 21.1% 1.8% 11.0% 66.1% [libx264 @ 0xab87320] mb I I16..4: 50.0% 21.1% 28.9% [libx264 @ 0xab87320] mb P I16..4: 6.1% 0.9% 3.2% P16..4: 5.5% 1.2% 0.6% 0.0% 0.0% skip:82.5% [libx264 @ 0xab87320] mb B I16..4: 0.4% 0.1% 0.0% B16..8: 2.9% 0.1% 0.0% direct: 0.0% skip:96.5% L0:40.7% L1:57.0% BI: 2.3% [libx264 @ 0xab87320] 8x8 transform intra:14.5% inter:46.1% [libx264 @ 0xab87320] coded y,u,v intra: 33.5% 24.1% 25.4% inter: 0.9% 0.4% 0.4% [libx264 @ 0xab87320] i16 v,h,dc,p: 70% 26% 1% 3% [libx264 @ 0xab87320] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 11% 21% 30% 5% 7% 5% 7% 4% 10% [libx264 @ 0xab87320] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 32% 35% 12% 2% 4% 3% 4% 3% 5% [libx264 @ 0xab87320] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0xab87320] ref P L0: 57.0% 5.6% 26.8% 10.6% [libx264 @ 0xab87320] ref B L0: 69.4% 22.6% 8.0% [libx264 @ 0xab87320] ref B L1: 93.7% 6.3% [libx264 @ 0xab87320] kb/s:2460.40

  Read the article

• Unable to list contents/remove directory (linux ext3)

  - by RedKrieg

  System is CentOS5 x86_64, completely up to date. I've got a folder that can't be listed (ls just hangs, eating memory until it is killed). The directory size is nearly 500k: root@server [/home/user/public_html/domain.com/wp-content/uploads/2010/03]# stat . File: `.' Size: 458752 Blocks: 904 IO Block: 4096 directory Device: 812h/2066d Inode: 44499071 Links: 2 Access: (0755/drwxr-xr-x) Uid: ( 3292/ user) Gid: ( 3287/ user) Access: 2012-06-29 17:31:47.000000000 -0400 Modify: 2012-10-23 14:41:58.000000000 -0400 Change: 2012-10-23 14:41:58.000000000 -0400 I can see the file names if I use ls -1f, but it just repeats the same 48 files ad infinitum, all of which have non-ascii characters somewhere in the file name: La-critic\363-al-servicio-la-privacidad-300x160.jpg When I try to access the files (say to copy them or remove them) I get messages like the following: lstat("/home/user/public_html/domain.com/wp-content/uploads/2010/03/Sebast\355an-Pi\361era-el-balc\363n-150x120.jpg", 0x7fff364c52c0) = -1 ENOENT (No such file or directory) I tried altering the code found on this man page and modified the code to call unlink for each file. I get the same ENOENT error from the unlink call: unlink("/home/user/public_html/domain.com/wp-content/uploads/2010/03/Marca-naci\363n-Madrid-150x120.jpg") = -1 ENOENT (No such file or directory) I also straced a "touch", grabbed the syscalls it makes and replicated them, then tried to unlink the resulting file by name. This works fine, but the folder still contains an entry by the same name after the operation completes and the program runs for an arbitrarily long time (strace output ended up at 20GB after 5 minutes and I stopped the process). I'm stumped on this one, I'd really prefer not to have to take this production machine (hundreds of customers) offline to fsck the filesystem, but I'm leaning toward that being the only option at this point. If anyone's had success using other methods for removing files (by inode number, I can get those with the getdents code) I'd love to hear them. (Yes, I've tried find . -inum <inode> -exec rm -fv {} \; and it still has the problem with unlink returning ENOENT) For those interested, here's the diff between that man page's code and mine. I didn't bother with error checking on mallocs, etc because I'm lazy and this is a one-off: root@server [~]# diff -u listdir-orig.c listdir.c --- listdir-orig.c 2012-10-23 15:10:02.000000000 -0400 +++ listdir.c 2012-10-23 14:59:47.000000000 -0400 @@ -6,6 +6,7 @@ #include <stdlib.h> #include <sys/stat.h> #include <sys/syscall.h> +#include <string.h> #define handle_error(msg) \ do { perror(msg); exit(EXIT_FAILURE); } while (0) @@ -17,7 +18,7 @@ char d_name[]; }; -#define BUF_SIZE 1024 +#define BUF_SIZE 1024*1024*5 int main(int argc, char *argv[]) { @@ -26,11 +27,16 @@ struct linux_dirent *d; int bpos; char d_type; + int deleted; + int file_descriptor; fd = open(argc > 1 ? argv[1] : ".", O_RDONLY | O_DIRECTORY); if (fd == -1) handle_error("open"); + char* full_path; + char* fd_path; + for ( ; ; ) { nread = syscall(SYS_getdents, fd, buf, BUF_SIZE); if (nread == -1) @@ -55,7 +61,24 @@ printf("%4d %10lld %s\n", d->d_reclen, (long long) d->d_off, (char *) d->d_name); bpos += d->d_reclen; + if ( d_type == DT_REG ) + { + full_path = malloc(strlen((char *) d->d_name) + strlen(argv[1]) + 2); //One for the /, one for the \0 + strcpy(full_path, argv[1]); + strcat(full_path, (char *) d->d_name); + + //We're going to try to "touch" the file. + //file_descriptor = open(full_path, O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK, 0666); + //fd_path = malloc(32); //Lazy, only really needs 16 + //sprintf(fd_path, "/proc/self/fd/%d", file_descriptor); + //utimes(fd_path, NULL); + //close(file_descriptor); + deleted = unlink(full_path); + if ( deleted == -1 ) printf("Error unlinking file\n"); + break; //Break on first try + } } + break; //Break on first try } exit(EXIT_SUCCESS);

  Read the article

• I can connect to Samba server but cannot access shares.

  - by jlego

  I'm having trouble getting samba sharing working to access shares. I have setup a stand-alone box running Fedora 16 to use as a file-sharing and web development server. It needs to be able to share files with a Windows 7 PC and a Mac running OSX Snow Leopard. I've setup Samba using the Samba configuration GUI tool on Fedora. Added users to Fedora and connected them as Samba users (which are the same as the Windows and Mac usernames and passwords). The workgroup name is the same as the Windows workgroup. Authentication is set to User. I've allowed Samba and Samba client through the firewall and set the ethernet to a trusted port in the firewall. Both the Windows and Mac machines can connect to the server and view the shares, however when trying to access the shares, Windows throws error: 0x80070035 " Windows cannot access \\SERVERNAME\ShareName." Windows user is not prompted for a username or password when accessing the server (found under "Network Places"). This also happens when connecting with the IP rather than the server name. The Mac can also connect to the server and see the shares but when choosing a share gives the error: The original item for ShareName cannot be found. When connecting via IP, the Mac user is prompted for username and password, which when authenticated gives a list of shares, however when choosing a share to connect to, the error is displayed and the user cannot access the share. Since both machines are acting similarly when trying to access the shares, I assume it is an issue with how Samba is configured. smb.conf: [global] workgroup = workgroup server string = Server log file = /var/log/samba/log.%m max log size = 50 security = user load printers = yes cups options = raw printcap name = lpstat printing = cups [homes] comment = Home Directories browseable = no writable = yes [printers] comment = All Printers path = /var/spool/samba browseable = yes printable = yes [FileServ] comment = FileShare path = /media/FileServ read only = no browseable = yes valid users = user1, user2 [webdev] comment = Web development path = /var/www/html/webdev read only = no browseable = yes valid users = user1 How do I get samba sharing working? UPDATE: I Figured it out, it was because I was sharing a second hard drive. See checked answer below. Speculation 1: Before this box I had another box with the same version of fedora installed (16) and samba working for these same computers. I started up the old machine and copied the smb.conf file from the old machine to the new one (editing the share definitions for the new shares of course) and I still get the same errors on both client machines. The only difference in environment is the hardware and the router. On the old machine the router received a dynamic public IP and assigned dynamic private IPs to each device on the network while the new machine is connected to a router that has a static public IP (still dynamic internal IPs though.) Could either one of these be affecting Samba? Speculation 2: As the directory I am trying to share is actually an entire internal disk, I have tried these things: 1.) changing the owner of the mounted disk from root to my user (which is the same username as on the Windows machine) 2.) made a share that only included one of the folders on the disk instead of the entire disk with my user again as the owner. Both tests failed giving me the same errors regarding the network address. Speculation 3: Whenever I try to connect to the share on the Windows 7 client I am prompted for my username and password. When I enter the correct credentials I get an access denied message. However I did notice that under the login box "domain: WINDOWS-PC-NAME" is listed. I believe this could very well be the problem. Speculation 4: So I've completely reinstalled Fedora and Samba now. I've created a share on the first harddrive (one fedora is installed on) and I can access that fine from Windows. However when I try to share any data on the second disk, I am receiving the same error. This I believe is the problem. I think I need to change some things in fstab or fdisk or something. Speculation 5: So in fstab I mapped the drive to automount in a folder which works correctly. I also added the samba_share_t SElinux label to the mountpoint directory which now allows me to access the shares on the Windows machine, however I cannot see any of the files in the directory on the windows machine. (They are there, I can see them in the fedora file browser locally)

  Read the article

• How can i add a checkbox for optional files during install? (innosetup)

  - by Globulorozzo

  i'm trying to make a custom checkbox in my custom page (because is a one page installer), is needed only a checkbox without dialogs or anything, the installer that i'm trying to compile is very linear and simple. i want to bind "FILE3.EXE" on a checkbox in this way: if checkbox is checked copy the file (FILE3.EXE) in DestDir, otherwise if checkbox is unchecked skip the file (FILE3.EXE) during installation. This is the code that i use, obviously the checkbox code is missing because i'm not able to do that [Files] Source: FILE1.EXE; DestDir: {app}; Source: FILE2.EXE; DestDir: {app}; Source: FILE3.EXE; DestDir: {app}; //OPTIONAL [Code] procedure ExitProcess(uExitCode: UINT); external '[email protected] stdcall'; var MainPage : TWizardPage; FolderToInstall : TEdit; InstallLocation : String; procedure CancelClick(Sender: TObject); begin if ExitSetupMsgBox then begin ExitProcess(0); end; end; procedure BrowseClick(Sender : TObject); var Dir : String; begin Dir := FolderToInstall.Text; if BrowseForFolder('Browse',Dir,false) then FolderToInstall.Text := Dir; WizardForm.DirEdit.Text := Dir; end; procedure InitializeWizard(); var LabelFolder : TLabel; begin WizardForm.ClientWidth:=ScaleX(550); WizardForm.ClientHeight:=ScaleY(250); WizardForm.Center; WizardForm.OuterNotebook.Hide; WizardForm.InnerNotebook.Hide; WizardForm.Bevel.hide; Wizardform.NextButton.top := 180; Wizardform.NextButton.Left := 470; WizardForm.NextButton.Height := 25; WizardForm.StatusLabel.Parent := WizardForm; WizardForm.StatusLabel.Left := 6; WizardForm.StatusLabel.Top := 206; WizardForm.FilenameLabel.Parent := WizardForm; WizardForm.FilenameLabel.Left := 87; WizardForm.FilenameLabel.Top := 206; WizardForm.FilenameLabel.Width := ScaleX(383); WizardForm.ProgressGauge.Parent := WizardForm; WizardForm.ProgressGauge.Left :=5; WizardForm.ProgressGauge.Top := 222; WizardForm.ProgressGauge.Width := ScaleX(460); MainPage := CreateCustomPage(wpWelcome,'',''); LabelFolder := TLabel.Create(MainPage); LabelFolder.Parent := WizardForm; LabelFolder.Top := 164; LabelFolder.Left := 6; LabelFolder.Caption := 'Directory:' FolderToInstall := TEdit.Create(MainPage); FolderToInstall.Parent := WizardForm; FolderToInstall.Top := 182; FolderToInstall.Left := 85; FolderToInstall.Width := 380; FolderToInstall.Text := WizardDirValue; FolderToInstall.ReadOnly := True; end;

  Read the article

• asp.net mvc jquery + tabs +jqgrid +jqgrid loaded only for first tab

  - by niao

  Greetings, I have a problem using jqgrid and jquery tab (I am coding in asp.net mvc) I have two tabs. Each tabs should contains jqgrid with different data. I specify tabs as follows: <script type="text/javascript"> $(document).ready(function() { $("#tabs").tabs(); getContentTab (1); }); function getContentTab(index) { var url='<%= Url.Content("~/Admin/GetWorkspaces") %>/' + index; var targetDiv = "#tabs-" + index; var ajaxLoading = "<img id='ajax-loader' src='<%= Url.Content("~/Content") %>/ajax-loader.gif' align='left' height='28' width='28'>"; $(targetDiv).html("<p>" + ajaxLoading + " Loading...</p>"); $.get(url,null, function(result) { $(targetDiv).html(result); }); } </script> <div id="tabs"> <ul> <li><a href="#tabs-1" onclick="getContentTab(1);">tab1</a></li> <li><a href="#tabs-2" onclick="getContentTab(2);">tab2</a></li> </ul> <div id="tabs-1"> </div> <div id="tabs-2"> </div> </div> As seen above GetWorkspaces action gets my tabs: public ActionResult GetWorkspaces(int id) { string viewName = string.Empty; switch (id) { case 1: viewName = "MarketplaceOfferView"; break; case 2: viewName = "MyMessagesView"; break; } return PartialView(viewName); } each of view is a partial view. In these partial views I have jqgrids specified as follows: <script type="text/javascript"> jQuery("#list").ready(function() { jQuery("#list").jqGrid({ url: '/Admin/GetGridData/', datatype: 'json', mtype: 'GET', colNames: ['Klient', 'Zapytanie', 'Atrakcyjnosc', 'Cena', 'Data poczatkowa', 'Data koncowa', 'Branza', 'Lokalizacja' ], colModel: [ { name: 'CompanyName', index: 'CompanyName', width: 150, align: 'left' }, { name: 'Content', index: 'ContactName', width: 300, align: 'left' }, { name: 'Rating', index: 'Address', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'City', width: 150, align: 'left' }, { name: 'Price', index: 'PostalCode', width: 100, align: 'left' } ], pager: jQuery('#pager'), rowNum: 100, rowList: [5, 10, 20, 50], sortname: 'Operator.FullName', sortorder: "asc", viewrecords: true, imgpath: '/scripts/themes/steel/images', caption: 'Historia moich wiadomosci', height:400 }); // .navGrid(pager, { edit: true, add: false, del: false, refresh: true, search: false }); }); </script> Historia moich wiadomosci <table id="list" class="scroll" cellpadding="0" cellspacing="0" width="100%"> </table> <div id="pager" class="scroll" style="text-align: center;"> </div> For second view I have an action: /Admin/GetGridDataForTab2/ THe problem is that I see a jqgrid only when I click on first tab. When I click on second tab the grid is not displayed and /Admin/GetGridData/ is not executed. Does anybody have an idea what is wrong?

  Read the article

• Google maps api v3 refreshing away markers

  - by Paul Peelen

  Hi, I am having problems with the google maps API V3. It seems that every time I load my page the maps load (including the markers) and then it does a quick reload and removes all the markers. Am I missing somehting? What am I doing wrong? Here is an example: http://www.PaulPeelen.com/wp-content/uploads/2010/04/SafariScreenSnapz001.mov this is my code: <script type="text/javascript"> <!-- var hash = "{{$sHashLocal}}"; var webroot = "{{$webroot}}"; var map; function initialize() { var latlng = new google.maps.LatLng(59.32045, 18.066902); var myOptions = { zoom: 13, center: latlng, mapTypeId: google.maps.MapTypeId.ROADMAP }; map = new google.maps.Map(document.getElementById("map_canvas"), myOptions); return map; } function getMarkerInfo (infowindow, rack_id) { // Get all the racks $.ajax({ type: "GET", url: webroot+"ajax/getRack/"+hash+"/"+rack_id, cache: false, dataType: "html", success: function(html) { $("#rack_"+rack_id).html(); infowindow.setContent(html); } }); } $(document).ready(function () { map = initialize(); function attachSecretMessage(marker, rack_id) { var infowindow = new google.maps.InfoWindow({ size: new google.maps.Size(50,50) }); google.maps.event.addListener(marker, 'click', function(){ var ret = '<div id="rack_'+rack_id+'" class="rackDiv"><div class="rackDivLoading"><img src="theme/images/loader-small.gif" border="0"/><span>Hämtar data</span></div></div>'; infowindow.setContent(ret); infowindow.open(map,marker); getMarkerInfo(infowindow,rack_id); }); } function addPlacemark (lat,lng,title, rack_id) { var image = new google.maps.MarkerImage('http://www.google.com/intl/en_us/mapfiles/ms/micons/blue-dot.png', new google.maps.Size(32, 32), new google.maps.Point(0,0), new google.maps.Point(0, 32)); var shadow = new google.maps.MarkerImage('http://maps.google.com/mapfiles/shadow50.png', new google.maps.Size(37, 34), new google.maps.Point(0,0), new google.maps.Point(-4, 34)); var location = new google.maps.LatLng(lat,lng); var marker = new google.maps.Marker({ position: location, map: map, icon: image, shadow: shadow}); marker.setTitle(title); attachSecretMessage(marker, rack_id); } // Get all the racks $.ajax({ type: "GET", url: webroot+"ajax/getRacks/"+hash, cache: false, dataType: "xml", success: function(xml) { // Add the results $(xml).find("station").each(function () { rack_id = $(this).find("rack_id").text(); title = $(this).find("description").text(); longitute = parseFloat($(this).find("longitute").text()); latitude = parseFloat($(this).find("latitude").text()); addPlacemark(latitude, longitute, title, rack_id); }); } }); $("#addMark").click(function () { addPlacemark (59.32045, 18.066902); }); // Set size setPageSize(); }); //--> </script> I hope somebody can help me. Best regards, Paul Peelen

  Read the article

• ASP.NET MVC jquery.UI dialog - How to validate the dialog's input on server and return error?

  - by Rick

  I am using jQuery1.4.2, ASP.NET MVC 2 and jQuery.UI-1.8. I am creating a data input dialog which works OK when all the data is valid, but I want to validate the input data on the server and return an error to the dialog describing the error and I am not quite sure how to do that and keep the dialog open. The dialog is opened when a link is clicked. The solution may be to try to bypass more of the MVC framework's default binding that handles the submit button clicks and creates the expected ProfilePermission object and calls the Controller's AddPermission POST Action method, but I was hoping there may be an easier way without have to write more jquery/javascript code to handle the button clicks and pass the data to the server. My script code looks like $("#dialog").dialog({ modal: true, position: ['center', 180], width: 500, height: 130, autoOpen: false }); $(".addPermissionDialog").click(function (event) { event.preventDefault(); $("#dialog").dialog('open'); return false; }); My View <div id="dialog" title="Add Permission"> <%: Html.ValidationSummary("") %> <% using (Html.BeginForm("AddPermission", "Profile")) { %> <%: Html.Hidden("PersonId") %> <%: Html.Hidden("ProfileId") %> <div class="editor-label"> <label for="PersonName">User Name:</label> <%: Html.TextBox("PersonName")%> <label for="PermissionType">Permission:</label> <select name="PermissionTypeId" id="PermissionTypeId" > <option value="2">Edit</option> <option value="3">View</option> </select> </div> <br /> <p> <input type="submit" name="saveButton" value="Add Permission" /> <input type="submit" id="cancelButton" name="cancelButton" value="Cancel" /> <script type="text/javascript"> document.getElementById("cancelButton").disableValidation = true; </script> </p> <% } %> </div> <br /> <p> <%: Html.ActionLink("Add Permission", "AddPermission", new { profileId = Model.First().ProfileId }, new { @class = "addPermissionDialog" })%> </p> My Controller action [AcceptVerbs("Post")] [HandleError] public ActionResult AddPermission(string cancelButton, ProfilePermission profilePermission) { ViewData["Controller"] = controllerName; ViewData["CurrentCategory"] = "AddPermission"; ViewData["ProfileId"] = profilePermission.ProfileId; PermissionTypes permission = repository.GetAccessRights(profilePermission.ProfileId); if (permission == PermissionTypes.View || permission == PermissionTypes.None) { ViewData["Message"] = "You do not have access rights (Edit or Owner permissions) to this profile"; return View("Error"); } // If cancel return to previous page if (cancelButton != null) { return RedirectToAction("ManagePermissions", new { profileId = profilePermission.ProfileId }); } if (ModelState.IsValid) { repository.SavePermission(profilePermission); return RedirectToAction("ManagePermissions", new { profileId = profilePermission.ProfileId }); } // IF YOU GET HERE THERE WAS AN ERROR return PartialView(profilePermission); // The desire is to redisplay the dialog with error message }

  Read the article

• WPF - How can I place a usercontrol over an AdornedElementPlaceholder?

  - by Kevin

  I'm trying to get the validation to not show through my custom modal dialog. I've tried setting the zindex of the dialog and and of the elements in this template. Any ideas? This is coming from a validation template: <ControlTemplate x:Key="ValidationTemplate"> <DockPanel> <TextBlock Foreground="Red" FontSize="20" Panel.ZIndex="-10">!</TextBlock> <Border Name="validationBorder" BorderBrush="Red" BorderThickness="2" Padding="1" CornerRadius="3" Panel.ZIndex="-10"> <Border.Resources> <Storyboard x:Key="_blink"> <ColorAnimationUsingKeyFrames AutoReverse="True" BeginTime="00:00:00" Storyboard.TargetName="validationBorder" Storyboard.TargetProperty="(Border.BorderBrush).(SolidColorBrush.Color)" RepeatBehavior="Forever"> <SplineColorKeyFrame KeyTime="00:00:1" Value="#00FF0000"/> </ColorAnimationUsingKeyFrames> </Storyboard> </Border.Resources> <Border.Triggers> <EventTrigger RoutedEvent="FrameworkElement.Loaded"> <BeginStoryboard Storyboard="{StaticResource _blink}" /> </EventTrigger> </Border.Triggers> <AdornedElementPlaceholder/> </Border> </DockPanel> </ControlTemplate> The dialog: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" x:Class="GunMiser.Controls.PendingChangesConfirmationDialog" Height="768" Width="1024" mc:Ignorable="d"> <Grid Background="White"> <Rectangle x:Name="MainRectangle" Margin="0,0,0,0" Style="{DynamicResource UserControlOverlayRectangleStyle}" Opacity="0.85"/> <Border Margin="288,250,278,288" Background="#FF868686" BorderBrush="Black" BorderThickness="1"> <Border.Effect> <DropShadowEffect Color="#FFB6B2B2"/> </Border.Effect> <TextBlock x:Name="textBlockMessage" Margin="7,29,7,97" TextWrapping="Wrap" d:LayoutOverrides="VerticalAlignment" TextAlignment="Center"/> </Border> <Button x:Name="OkButton" Click="OkButton_Click" Margin="313,0,0,328" VerticalAlignment="Bottom" Height="24" Content="Save Changes" Style="{DynamicResource GunMiserButtonStyle}" HorizontalAlignment="Left" Width="103"/> <Button Click="CancelButton_Click" Margin="453.294,0,456,328" VerticalAlignment="Bottom" Height="24" Content="Cancel Changes" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="CancelActionButton_Click" Margin="0,0,304,328" VerticalAlignment="Bottom" Height="24" Content="Go Back" Style="{DynamicResource GunMiserButtonStyle}" HorizontalAlignment="Right" Width="114.706"/> </Grid> </UserControl> And the overall window is: <Window x:Class="GunMiser.Views.Shell" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:cal="http://www.codeplex.com/CompositeWPF" xmlns:controls="clr-namespace:GunMiser.Controls;assembly=GunMiser.Controls" Title="Gun Miser" Height="768" Width="1024"> <Canvas> <controls:PendingChangesConfirmationDialog x:Name="PendingChangesConfirmationDialog" HorizontalAlignment="Stretch" Margin="0,0,0,0" VerticalAlignment="Stretch" Width="1008" Height="730" Visibility="Collapsed" Panel.ZIndex="100" /> <ContentControl x:Name="FilterRegion" cal:RegionManager.RegionName="FilterRegion" Width="326" Height="656" Canvas.Top="32" VerticalAlignment="Top" HorizontalAlignment="Left" /> <ContentControl Name="WorkspaceRegion" cal:RegionManager.RegionName="WorkspaceRegion" Width="678" Height="726" Canvas.Left="330" VerticalAlignment="Top" HorizontalAlignment="Left"/> <Button Click="GunsButton_Click" Width="75" Height="25" Content="Guns" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="OpticsButton_Click" Width="75" Height="25" Content="Optics" Canvas.Left="81" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="SettingsButton_Click" Width="56" Height="28" Content="Settings" Canvas.Left="944" Style="{DynamicResource GunMiserButtonStyle}" HorizontalAlignment="Left" VerticalAlignment="Top"/> <Button Click="AccessoriesButton_Click" Width="75" Height="25" Content="Accessories" Canvas.Left="239" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="AmmunitionButton_Click" Width="75" Height="25" Content="Ammunition" Canvas.Left="160" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> </Canvas> </Window>

  Read the article

• WPF Customized TabControl

  - by xsl

  I have to develop a customized tab control and decided to create it with WPF/XAML, because I planned to learn it anyway. It should look like this when it's finished: I made good progress so far, but there are two issues left: Only the first/last tab item should have a rounded upper-left/bottom-left corner. Is it possible to modify the style of these items, similar to the way I did with the selected tab item? The selected tab item should not have a border on its right side. I tried to accomplish this with z-index and overlapping, but the results were rather disappointing. Is there any other way to do this? XAML: <Window x:Class="MyProject.TestWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="TestWindow" Height="350" Width="500" Margin="5" Background="LightGray"> <Window.Resources> <Style TargetType="{x:Type TabControl}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type TabControl}"> <DockPanel> <Border Margin="0,100,-1,0" Background="#FFAAAAAA" BorderBrush="Gray" CornerRadius="7,0,0,7" BorderThickness="1"> <TabPanel Margin="0,0,0,0" IsItemsHost="True" /> </Border> <Border Background="WhiteSmoke" BorderBrush="Gray" BorderThickness="1" CornerRadius="7,7,7,0" > <ContentPresenter ContentSource="SelectedContent" /> </Border> </DockPanel> </ControlTemplate> </Setter.Value> </Setter> </Style> <Style TargetType="{x:Type TabItem}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type TabItem}"> <Grid> <Border Name="Border" Background="#FFAAAAAA" CornerRadius="7,0,0,0" BorderBrush="Gray" BorderThickness="0,0,0,1" Margin="0,0,0,0"> <ContentPresenter x:Name="ContentSite" VerticalAlignment="Center" HorizontalAlignment="Left" ContentSource="Header" Margin="10,10,10,10"/> </Border> </Grid> <ControlTemplate.Triggers> <Trigger Property="IsSelected" Value="True"> <Setter TargetName="Border" Property="Background" Value="WhiteSmoke" /> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> </Window.Resources> <Grid> <TabControl Name="_menuTabControl" TabStripPlacement="Left" Margin="5"> <TabItem Name="_tabItem1" Header="First Tab Item" ></TabItem> <TabItem Name="_tabItem2" Header="Second Tab Item" > <Grid /> </TabItem> <TabItem Name="_tabItem3" Header="Third Tab Item" > <Grid /> </TabItem> </TabControl> </Grid>

  Read the article

• Fixing predicated NSFetchedResultsController/NSFetchRequest performance with SQLite backend?

  - by Jaanus

  I have a series of NSFetchedResultsControllers powering some table views, and their performance on device was abysmal, on the order of seconds. Since it all runs on main thread, it's blocking my app at startup, which is not great. I investigated and turns out the predicate is the problem: NSPredicate *somePredicate = [NSPredicate predicateWithFormat:@"ANY somethings == %@", something]; [fetchRequest setPredicate:somePredicate]; I.e the fetch entity, call it "things", has a many-to-many relation with entity "something". This predicate is a filter that limits the results to only things that have a relation with a particular "something". When I removed the predicate for testing, fetch time (the initial performFetch: call) dropped (for some extreme cases) from 4 seconds to around 100ms or less, which is acceptable. I am troubled by this, though, as it negates a lot of the benefit I was hoping to gain with Core Data and NSFRC, which otherwise seems like a powerful tool. So, my question is, how can I optimize this performance? Am I using the predicate wrong? Should I modify the model/schema somehow? And what other ways there are to fix this? Is this kind of degraded performance to be expected? (There are on the order of hundreds of <1KB objects.) EDIT WITH DETAILS: Here's the code: [fetchRequest setFetchLimit:200]; NSLog(@"before fetch"); BOOL success = [frc performFetch:&error]; if (!success) { NSLog(@"Fetch request error: %@", error); } NSLog(@"after fetch"); Updated logs (previously, I had some application inefficiencies degrading the performance here. These are the updated logs that should be as close to optimal as you can get under my current environment): 2010-02-05 12:45:22.138 Special Ppl[429:207] before fetch 2010-02-05 12:45:22.144 Special Ppl[429:207] CoreData: sql: SELECT DISTINCT 0, t0.Z_PK, t0.Z_OPT, <model fields> FROM ZTHING t0 LEFT OUTER JOIN Z_1THINGS t1 ON t0.Z_PK = t1.Z_2THINGS WHERE t1.Z_1SOMETHINGS = ? ORDER BY t0.ZID DESC LIMIT 200 2010-02-05 12:45:22.663 Special Ppl[429:207] CoreData: annotation: sql connection fetch time: 0.5094s 2010-02-05 12:45:22.668 Special Ppl[429:207] CoreData: annotation: total fetch execution time: 0.5240s for 198 rows. 2010-02-05 12:45:22.706 Special Ppl[429:207] after fetch If I do the same fetch without predicate (by commenting out the two lines in the beginning of the question): 2010-02-05 12:44:10.398 Special Ppl[414:207] before fetch 2010-02-05 12:44:10.405 Special Ppl[414:207] CoreData: sql: SELECT 0, t0.Z_PK, t0.Z_OPT, <model fields> FROM ZTHING t0 ORDER BY t0.ZID DESC LIMIT 200 2010-02-05 12:44:10.426 Special Ppl[414:207] CoreData: annotation: sql connection fetch time: 0.0125s 2010-02-05 12:44:10.431 Special Ppl[414:207] CoreData: annotation: total fetch execution time: 0.0262s for 200 rows. 2010-02-05 12:44:10.457 Special Ppl[414:207] after fetch 20-fold difference in times. 500ms is not that great, and there does not seem to be a way to do it in background thread or otherwise optimize that I can think of. (Apart from going to a binary store where this becomes a non-issue, so I might do that. Binary store performance is consistently ~100ms for the above 200-object predicated query.) (I nested another question here previously, which I now moved away).

  Read the article

• Show certain InfoWindow in Google Map API V3

  - by pash

  Hello. I wrote the following code to display markers. There are 2 buttons which show Next or Previous Infowindow for markers. But problem is that InfoWindows are not shown using google.maps.event.trigger Can someone help me with this problem. Thank you. Here is code: <html> <head> <meta name="viewport" content="initial-scale=1.0, user-scalable=no" /> <meta http-equiv="content-type" content="text/html; charset=UTF-8"/> <title>Google Maps JavaScript API v3 Example: Common Loader</title> <script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=false"></script> <script type="text/javascript"> var infowindow; var map; var bounds; var markers = []; var markerIndex=0; function initialize() { var myLatlng = new google.maps.LatLng(41.051407, 28.991134); var myOptions = { zoom: 5, center: myLatlng, mapTypeId: google.maps.MapTypeId.ROADMAP } map = new google.maps.Map(document.getElementById("map_canvas"), myOptions); markers = document.getElementsByTagName("marker"); for (var i = 0; i < markers.length; i++) { var latlng = new google.maps.LatLng(parseFloat(markers[i].getAttribute("lat")), parseFloat(markers[i].getAttribute("lng"))); var marker = createMarker(markers[i].getAttribute("name"), latlng, markers[i].getAttribute("phone"), markers[i].getAttribute("distance")); } rebound(map); } function createMarker(name, latlng, phone, distance) { var marker = new google.maps.Marker({position: latlng, map: map}); var myHtml = "<table style='width:100%;'><tr><td><b>" + name + "</b></td></tr><tr><td>" + phone + "</td></tr><tr><td align='right'>" + distance + "</td></tr></table>"; google.maps.event.addListener(marker, "click", function() { if (infowindow) infowindow.close(); infowindow = new google.maps.InfoWindow({content: myHtml}); infowindow.open(map, marker); }); return marker; } function rebound(mymap){ bounds = new google.maps.LatLngBounds(); for (var i = 0; i < markers.length; i++) { bounds.extend(new google.maps.LatLng(parseFloat(markers[i].getAttribute("lat")),parseFloat(markers[i].getAttribute("lng")))); } mymap.fitBounds(bounds); } function showNextInfo() { if(markerIndex<markers.length-1) markerIndex++; else markerIndex = 0 ; alert(markers[markerIndex].getAttribute('name')); google.maps.event.trigger(markers[markerIndex],"click"); } function showPrevInfo() { if(markerIndex>0) markerIndex--; else markerIndex = markers.length-1 ; google.maps.event.trigger(markers[markerIndex],'click'); } </script> </head> <body onload="initialize()"> <div id="map_canvas" style="width:400px; height:300px"></div> <markers> <marker name='Name1' lat='41.051407' lng='28.991134' phone='+902121234561' distance=''/> <marker name='Name2' lat='40.858746' lng='29.121666' phone='+902121234562' distance=''/> <marker name='Name3' lat='41.014604' lng='28.972256' phone='+902121234562' distance=''/> <marker name='Name4' lat='41.012386' lng='26.978350' phone='+902121234562' distance=''/> </markers> <input type="button" onclick="showPrevInfo()" value="prev">&nbsp;<input type="button" onclick="showNextInfo()" value="next"> </body> </html>

  Read the article

• Implementing Unit Testing on the iPhone

  - by james.ingham

  Hi, So I've followed this tutorial to setup unit testing on my app when I got a little stuck. At bullet point 8 in that tutorial it shows this image, which is what I should be expecting when I build: However this isn't what I get when I build. I get this error message: Command /bin/sh failed with exit code 1 as well as the error message the unit test has created. Then, when I expand on the first error I get this: PhaseScriptExecution "Run Script" "build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh" cd "/Users/james/Desktop/FYP/3D Pool" setenv ACTION build setenv ALTERNATE_GROUP staff ... setenv XCODE_VERSION_MAJOR 0300 setenv XCODE_VERSION_MINOR 0320 setenv YACC /Developer/usr/bin/yacc /bin/sh -c "\"/Users/james/Desktop/FYP/3D Pool/build/3D Pool.build/Debug-iphonesimulator/LogicTests.build/Script-1A6BA6AE10F28F40008AC2A8.sh\"" /Developer/Tools/RunPlatformUnitTests.include:412: note: Started tests for architectures 'i386' /Developer/Tools/RunPlatformUnitTests.include:419: note: Running tests for architecture 'i386' (GC OFF) objc[12589]: GC: forcing GC OFF because OBJC_DISABLE_GC is set Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' started at 2010-01-04 21:05:06 +0000 Test Suite 'LogicTests' started at 2010-01-04 21:05:06 +0000 Test Case '-[LogicTests testFail]' started. /Users/james/Desktop/FYP/3D Pool/LogicTests.m:17: error: -[LogicTests testFail] : Must fail to succeed. Test Case '-[LogicTests testFail]' failed (0.000 seconds). Test Suite 'LogicTests' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.000) seconds Test Suite '/Users/james/Desktop/FYP/3D Pool/build/Debug-iphonesimulator/LogicTests.octest(Tests)' finished at 2010-01-04 21:05:06 +0000. Executed 1 test, with 1 failure (0 unexpected) in 0.000 (0.002) seconds /Developer/Tools/RunPlatformUnitTests.include:448: error: Failed tests for architecture 'i386' (GC OFF) /Developer/Tools/RunPlatformUnitTests.include:462: note: Completed tests for architectures 'i386' Command /bin/sh failed with exit code 1 Now this is very odd as it is running the tests (and succeeding as you can see my STFail firing) because if I add a different test which passes I get no errors, so the tests are working fine. But why am I getting this extra build fail? It may also be of note that when downloading solutions/templates which should work out the box, I get the same error. I'm guessing I've set something up wrong here but I've just followed a tutorial 100% correctly!! If anyone could help I'd be very grateful! Thanks EDIT: According to this blog, this post and a few other websites, I'm not the only one getting this problem. It has been like this since the release of xCode 3.2, assuming the apple dev center documents and tutorials etc are pre-3.2 as well. However some say its a known issue whereas others seem to think this was intentional. I for one would like both the extended console and in code messages, and I certainly do not like the "Command /bin/sh..." error and really think they would have documented such an update. Hopefully it will be fixed soon anyway. UPDATE: Here's confirmation it's something changed since the release of xCode 3.2.1. This image: is from my test build using 3.2.1. This one is from an older version (3.1.4): . (The project for both was unchanged).

  Read the article

• Call Webservice without adding a WebReference - with Complex Types

  - by ck

  I'm using the code at This Site to call a webservice dynamically. [SecurityPermissionAttribute(SecurityAction.Demand, Unrestricted = true)] public static object CallWebService(string webServiceAsmxUrl, string serviceName, string methodName, object[] args) { System.Net.WebClient client = new System.Net.WebClient(); //-Connect To the web service using (System.IO.Stream stream = client.OpenRead(webServiceAsmxUrl + "?wsdl")) { //--Now read the WSDL file describing a service. ServiceDescription description = ServiceDescription.Read(stream); ///// LOAD THE DOM ///////// //--Initialize a service description importer. ServiceDescriptionImporter importer = new ServiceDescriptionImporter(); importer.ProtocolName = "Soap12"; // Use SOAP 1.2. importer.AddServiceDescription(description, null, null); //--Generate a proxy client. importer.Style = ServiceDescriptionImportStyle.Client; //--Generate properties to represent primitive values. importer.CodeGenerationOptions = System.Xml.Serialization.CodeGenerationOptions.GenerateProperties; //--Initialize a Code-DOM tree into which we will import the service. CodeNamespace nmspace = new CodeNamespace(); CodeCompileUnit unit1 = new CodeCompileUnit(); unit1.Namespaces.Add(nmspace); //--Import the service into the Code-DOM tree. This creates proxy code //--that uses the service. ServiceDescriptionImportWarnings warning = importer.Import(nmspace, unit1); if (warning == 0) //--If zero then we are good to go { //--Generate the proxy code CodeDomProvider provider1 = CodeDomProvider.CreateProvider("CSharp"); //--Compile the assembly proxy with the appropriate references string[] assemblyReferences = new string[5] { "System.dll", "System.Web.Services.dll", "System.Web.dll", "System.Xml.dll", "System.Data.dll" }; CompilerParameters parms = new CompilerParameters(assemblyReferences); CompilerResults results = provider1.CompileAssemblyFromDom(parms, unit1); //-Check For Errors if (results.Errors.Count > 0) { StringBuilder sb = new StringBuilder(); foreach (CompilerError oops in results.Errors) { sb.AppendLine("========Compiler error============"); sb.AppendLine(oops.ErrorText); } throw new System.ApplicationException("Compile Error Occured calling webservice. " + sb.ToString()); } //--Finally, Invoke the web service method Type foundType = null; Type[] types = results.CompiledAssembly.GetTypes(); foreach (Type type in types) { if (type.BaseType == typeof(System.Web.Services.Protocols.SoapHttpClientProtocol)) { Console.WriteLine(type.ToString()); foundType = type; } } object wsvcClass = results.CompiledAssembly.CreateInstance(foundType.ToString()); MethodInfo mi = wsvcClass.GetType().GetMethod(methodName); return mi.Invoke(wsvcClass, args); } else { return null; } } } This works fine when I use built in types, but for my own classes, I get this: Event Type: Error Event Source: TDX Queue Service Event Category: None Event ID: 0 Date: 12/04/2010 Time: 12:12:38 User: N/A Computer: TDXRMISDEV01 Description: System.ArgumentException: Object of type 'TDXDataTypes.AgencyOutput' cannot be converted to type 'AgencyOutput'. Server stack trace: at System.RuntimeType.CheckValue(Object value, Binder binder, CultureInfo culture, BindingFlags invokeAttr) at System.Reflection.MethodBase.CheckArguments(Object[] parameters, Binder binder, BindingFlags invokeAttr, CultureInfo culture, Signature sig) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.Reflection.MethodBase.Invoke(Object obj, Object[] parameters) at TDXQueueEngine.GenericWebserviceProxy.CallWebService(String webServiceAsmxUrl, String serviceName, String methodName, Object[] args) in C:\CkAdmDev\TDXQueueEngine\TDXQueueEngine\TDXQueueEngine\GenericWebserviceProxy.cs:line 76 at TDXQueueEngine.TDXQueueWebserviceItem.Run() in C:\CkAdmDev\TDXQueueEngine\TDXQueueEngine\TDXQueueEngine\TDXQueueWebserviceItem.cs:line 99 at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.PrivateProcessMessage(RuntimeMethodHandle md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase) at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData) at TDXQueueEngine.TDXQueue.RunProcess.EndInvoke(IAsyncResult result) at TDXQueueEngine.TDXQueue.processComplete(IAsyncResult ar) in C:\CkAdmDev\TDXQueueEngine\TDXQueueEngine\TDXQueueEngine\TDXQueue.cs:line 130 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. The classes reference the same assembly and the same version. Do I need to include my assembly as a reference when building the temporary assembly? If so, how? Thanks.

  Read the article

• Rendering a WPF Network Map/Graph layout - Manual? PathListBox? Something Else?

  - by Ben Von Handorf

  I'm writing code to present the user with a simplified network map. At any given time, the map is focused on a specific item... say a router or a server. Based on the focused item, other network entities are grouped into sets (i.e. subnets or domains) and then rendered around the focused item. Lines would represent connections and groups would be visually grouped inside a rectangle or ellipse. Panning and zooming are required features. An item can be selected to display more information in a "properties" style window. An item could also be double-clicked to re-focus the entire network map on that item. At that point, the entire map would be re-calculated. I am using MVVM without any framework, as of yet. Assume the logic for grouping items and determining what should be shown or not is all in place. I'm looking for the best way to approach the UI layout. So far, I'm aware of the following options: Use a canvas for layout (inside a ScrollViewer to handle the panning). Have my ViewModel make use of a Layout Manager type of class, which would handle assigning all the layout properties (Top, Left, etc.). Bind my set of display items to an ItemsControl and use Data Templates to handle the actual rendering. The drawbacks with this approach: Highly manual layout on my part. Lots of calculation. I have to handle item selection manually. Computation of connecting lines is manual. The Pros of this approach: I can draw additional lines between child subnets as appropriate (manually). Additional LayoutManagers could be added later to render the display differently. This could probably be wrapped up into some sort of a GraphLayout control to be re-used. Present the focused item at the center of the display and then use a PathListBox for layout of the additional items. Have my ViewModel expose a simple list of things to be drawn and bind them to the PathListBox. Override the ListBoxItem Template to also create a line geometry from the borders of the focused item (tricky) to the bound item. Use DataTemplates to handle the case where the item being bound is a subnet, in which case we would use another PathListBox in the template to display items inside the subnet. The drawbacks with this approach: Selected Item synchronization across multiple `PathListBox`es. Only one item on the whole graph can be selected at a time, but each child PathListBox maintains its own selection. Also, subnets cannot be selected, but would be selectable without additional work. Drawing the connecting lines is going to be a bit of trickery in the ListBoxItem template, since I need to know the correct side of the focused item to connect to. The pros of this approach: I get to stay out of the layout business, more. I'm looking for any advice or thoughts from others who have encountered similar issues or who have more WPF experience than I. I'm using WPF 4, so any new tricks are legal and encouraged.

  Read the article

• Treeview - Hierarchical Data Template - Binding does not update on source change?

  - by ClearsTheScreen

  Greetings! I ran into this problem in my project (Silverlight 3 with C#): I have a TreeView which is data bound to, well, a tree. This TreeView has a HierarchicalDataTamplate in a resource dictionary, that defines various controls. Now I want to hide (Visibility.Collapse) some items depending on wether a node has children or not. Other items shall be visible under the same condition. It works like charm when I first bind the source tree to the TreeView, but when I change the source tree, the visibility in the treeview does not change. XAML - page: <controls:TreeView x:Name="SankeyTreeView" ItemContainerStyle="{StaticResource expandedTreeViewItemStyle}" ItemTemplate="{StaticResource SankeyTreeTemplate}"> <controls:TreeViewItem IsExpanded="True"> <controls:TreeViewItem.HeaderTemplate> <DataTemplate> <TextBlock Text="This is just for loading and will be replaced directly after the data becomes available..."/> </DataTemplate> </controls:TreeViewItem.HeaderTemplate> </controls:TreeViewItem> </controls:TreeView> XAML - ResourceDictionary <!-- Each node in the tree is structurally identical, hence only one Hierarchical Data Template that'll use itself on the children. --> <Data:HierarchicalDataTemplate x:Key="SankeyTreeTemplate" ItemsSource="{Binding Children}"> <Grid Height="24"> <TextBlock x:Name="TextBlockName" Text="{Binding Path=Value.name, Mode=TwoWay}" VerticalAlignment="Center" Foreground="Black"/> <TextBox x:Name="TextBoxFlow" Text="{Binding Path=Value.flow, Mode=TwoWay}" Grid.Column="1" Visibility="{Binding Children, Converter={StaticResource BoxConverter}, ConverterParameter=\{box\}}"/> <TextBlock x:Name="TextBlockThroughput" Text="{Binding Path=Value.throughput, Mode=TwoWay}" Grid.Column="1" Visibility="{Binding Children, Converter={StaticResource BoxConverter}, ConverterParameter=\{block\}}"/> <Button x:Name="ButtonAddNode"/> <Button x:Name="ButtonDeleteNode"/> <Button x:Name="ButtonEditNode"/> </Grid> </Data:HierarchicalDataTemplate> Now, as you can see, the TextBoxFlow and the TextBlockThroughput share the same space. What I aim at: The "Throughput" value of a node is how much of something 'flows' through this node from its children. It can't be changed directly, so I want to display a text block. Only leaf nodes have a TextBox to let someone enter the 'flow' that is generated in this leaf node. (I.E.: Node.Throughput = Node.Flow + Sum(Children.Throughput), where Node.Flow = 0 for each non-leaf.) What the BoxConverter (silly name -.-) does: public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { if ((value as NodeList<TreeItem>).Count > 1) // Node has Children? { if ((parameter as String) == "{box}") { return Visibility.Collapsed; } else ((parameter as String) == "{block}") { return Visibility.Visible; } } else { /* * As above, just with Collapsed and Visible switched */ } } The structure of the tree that is bound to the TreeView is essentially stolen from Dan Vanderboom (a bit too much to dump the whole code here), except that I here of course use an ObservableCollection for the children and the value items implement INotifyPropertyChanged. I would be very grateful if someone could explain to me, why inserting items into the underlying tree does not update the visibility for box and block. Thank you in advance!

  Read the article

< Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >