Search Results

Search found 19831 results on 794 pages for 'pc to android'.

Page 637/794 | < Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• Recover Intel Matrix Raid Configuration

  - by Catalin DICU

  Hello, I had 2 HDDs in Intel Matrix Raid configuration on a motherboard with intel ICH9R. I had some RAID 0 partitions and one RAID 1 partition. Somehow when replacing my videocard I partially unpulugged the power connector from one of the HDD. I booted and only one disk was showing. So I turned off the PC and correctly plugged the power connector and how both HDDs are showing as "Non-Raid Disk" Is there a way to restore the raid configuration from before ? In fact I don't really remember how my partitions where configured, I had 2x100Gb + 1x296Gb in RAID 0 and one 50Gb in RAID 1 (using 2x320Gb HDDs) but I'm not sure how many volumes and how the partitions where allocated on the volumes. Is there a tool to find that ? Thanks

  Read the article

• I want to replace Windows Server by Samba 4 for authentication purpose [closed]

  - by garden air

  I am using windows Server 2008 in a mediam size organization. I have 200 clients at the moment. I have learn that Samba4 has a remarkable changes for windows clienmts. I want to use Samba 4 to authenticate my windows xp and windows 7 clients machines. In my home based pc I am using vmware to test samba 4. For that purpose I am using CentOS 6.3 with Samab4. Kindly guide me taht it is possible that I replace windows server as a PDC controller and use samba4 to onlu authenticate my clients. I does not want Group Policy only and only authentication . So what u suggest me. Is it good to use samba 4 instaled of windows server. thanks, gardenair

  Read the article

• Smartcards for storing gpg/ssh keys (Linux) - what do I need?

  - by Ninefingers

  Hi All, I'm interested in storing my SSH keys and gpg keys on a smartcard for added security. However, I'm a bit uncertain on a few points, which are as follows: How many keys can I get on a card? I assume both SSH and GPG can store keys on the card. Is there a limit to key size? I see a lot of cards saying they support 2048-bit keys, what about larger sizes? Hardware: can anyone recommend a card/reader combination that works well? I've done a fair amount of research and it seems PC/SC readers can be a bit iffy - is this your experience? Have I missed anything I should be asking? Are there any other hurdles? I'm aware fsf europe give away cards with membership - I'm not sure I want to join, but... are these cards any good?

  Read the article

• What is the current state of development for the FLAC codec?

  - by TwentyMiles

  I have a pretty large collection of FLAC files created from my CD collection. I love the FLAC format and the sound quality that you can get from it. Lately, however, I've been trying to write a few tools to manipulate the files and I've been noticing what seems to be a stagnation of the community around the codec. Some of the links on the official FLAC page point to thing that are no longer relevant (7digital, for example, appears to no longer sell FLAC encoded songs). It's pretty hard to find hardware players that support FLAC any more (most noticeably it's not present on lower end players when it used to be, and playback is absent on Android). Programming language tools (Java and .NET libraries) are at best old, and at worst unfinished. What's the current state of FLAC development? Has it been replaced by another codec?

  Read the article

• USB to HDMI using just a cable

  - by Nirmal

  I got a cable which has a USB point on one side and an HDMI point on the other side. I was under an impression that I could watch movies from my computer if I connect my computer to the TV using this cable. But looks like I was wrong. Does anyone know if such cable need some driver to make it work? Thanks for any input. (My computer is a Dell All-in-one PC which cannot take an extra graphic card. That's why I am trying my luck with such a cable.)

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• Short USB cables not charging?

  - by tropolite

  I find this a strange problem but I can't find anything online about it. Recently I purchased a few short USB cables (20-30cm), to use in my car's USB connector to charge my phone. Strangely an older longer USB cable (1.2m), charges the phone fine (and the icon changes to show charging). With any of the short cables in the same USB slot no charging happens. Both the long and the short cables are USB2 compatible. I naturally assumed the short cables were faulty but connecting them to a PC or connecting to a high capacity external battery charging is successful using all the short cables and longer cables. Hopefully someone here is able to give me an explanation of the problem and how I can overcome this and use a short cable where it is most appropriate. Thanks

  Read the article

• Have a legitimate Windows 7 license and the Windows 7 key but don't have the DVD

  - by sonicboom

  I just booted up my 'old' PC that's been lying around for the last two years. I have Windows 7 on it and I'm looking to format the drive and do a fresh install of W7. I have the key for Windows 7 in a text file. However I don't have the Windows 7 DVD or image. So is there any way of burning off a Windows 7 DVD considering that its the operating system I'm currently using? If not...well I have a W7 key, will this key work with any W7 DVD or is it particular to the W7 image that came with the key?

  Read the article

• Safari MAC proxy bypass for IPv6

  - by rhi

  I'm a first-time n00b on Mac ; (but have been doing computers since before PC's). This Mac has 2 VLANs, vlan0 in IPv4, vlan1 in IPv6. Safari can surf via IPv4 squid proxy OK. Safari can surf via IPv6 natively, if I switch off the proxy, OK. How do I set up the Settings - Network - Interface - Advanced - Proxies to "bypass" IPv6 ? Current Settings include variations along the lines of ... "*.local, 10.0.0.0/8, 192.168.0.0/16, 172.16.0.0/12 , ::, ipv6 " but don't work as expected. I want Safari to go out on its own with IPv6, not crash at the proxy with "malformed URL" Thanks, //rhi

  Read the article

• interesting uses for a headless host running Ubuntu.

  - by Manuel

  Hey! So, I have configured a pc with no monitor, keyboard or mouse running Ubuntu. I use it as a ssh server, file backup, web server, etc. Though, it seems as if I could use it for sooo much more. The problem is I can't think of many more uses. What interesting uses of a headless host have you heard of? Is there a cool trick you want to share? Thanks! Manuel

  Read the article

• Is anyone else using OpenBSD as a router in the enterprise? What hardware are you running it on?

  - by Kamil Kisiel

  We have an OpenBSD router at each of our locations, currently running on generic "homebrew" PC hardware in a 4U server case. Due to reliability concerns and space considerations we're looking at upgrading them to some proper server-grade hardware with support etc. These boxes serve as the routers, gateways, and firewalls at each site. At this point we're quite familiar with OpenBSD and Pf, so hesitant at moving away from the system to something else such as dedicated Cisco hardware. I'm currently thinking of moving the systems to some HP DL-series 1U machines (model yet to be determined). I'm curious to hear if other people use a setup like this in their business, or have migrated to or away from one.

  Read the article

• Thinkpad CPU temperature reaches 100°C after 10 minutes of heavy use

  - by Nicolas Raoul

  Less than two years ago, I bought a Lenovo Thinkpad R500. When using the CPU heavily, it sometimes decides to reboot. I am using Linux, and a widget shows me the CPU temperature. The PC usually reboots when the temperature of the first core gets over 100°C Since I switched from Ubuntu 2010.10 32bit to Ubuntu 2011.04 64bit, it crashes much more often. I survive using these techniques: When in the office, I use a laptopcooler. When outside, I underclock to 800 MHz, by doing so it does not get too warm. QUESTION: Is it normal that a Thinkpad crashes if the CPU is at 100% for more than 10 minutes? How can I use the full power of my computer, for instance when showing CPU-hungry business intelligence tools to clients? The computer does not really feel that hot. Maybe the sensor itself is reporting wrong temperatures? Can I tell the BIOS to ignore it?

  Read the article

• USB resets with Ubuntu 9.10

  - by Grumbel

  Since the upgrade to Ubuntu 9.10 I have issues with getting USB device resets on my Maxtor OneTouch USB harddrive: Nov 9 20:54:37 localhost kernel: [32459.100021] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 21:54:37 localhost kernel: [36059.100017] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 23:24:37 localhost kernel: [41459.112025] usb 2-2: reset high speed USB device using ehci_hcd and address 4 The device itself continues to work fine, the resets however wake the device out of its sleep state and thus cause it to spin up, which is very annoying. Interestingly, as the log shows, the resets happen at pretty regular intervals (i.e. one hour or half an hour), not randomly. An USB card reader seems to have the same issues, while another USB harddrive from a different manufactor works fine on the same PC. What could be causing this and how could I fix it?

  Read the article

• P2V using Acronis True Image Home 10 and Windows 7

  - by Anthony

  I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

  Read the article

• wmic output well formed xml on remote queries

  - by Mervin

  I want to use the WMI command line tool (wmic) to get information about windows computers on the network and output it as valid xml. However, I can't seem to find the right way to do this as the outputted xml currently contains invalid tokens for which I think I should use the /TRANSLATE:basicxml switch. The command: wmic /NODE:"tech-demo" /IMPLEVEL:Impersonate /USER:MyUser /PASSWORD:MyPassword /PRIVILEGES:DISABLE /AUTHLEVEL:Pkt /AUTHORITY:"ntlmdomain:companydomain.local" PATH Win32_LogicalDisk GET * /FORMAT:rawxml This command runs but returns invalid xml tokens ('<' and '' I think? edit: it appears to fail parsing at ‹) When I add the translate switch I get the message: Can not use credentials for local connections a bit strange that it tries to query the local pc when I add the switch.. Help would be greatly appreciated.

  Read the article

• Error in Windows 7 after watching a MOV file

  - by JosephStyons

  Ever since watching a .MOV file with Windows Media Player on my pc, I am sporadically getting the below error. Does anyone know the cause of this, or a good way to fix it? This link has a hotfix, but it only applies to Windows XP. --------------------------- Microsoft Visual C++ Runtime Library --------------------------- Runtime Error! Program: C:\Windows\system32\DllHost.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. --------------------------- OK --------------------------- I am running Windows 7 with all updates installed.

  Read the article

• Recommend Online password manager [closed]

  - by Dmitriy Nagirnyak

  Possible Duplicate: online password manager with sharing capabilities Hi, I am looking for a good online password manager with the following requirements: Single click login from browser. Single click form saving from the browser. Not attached to a single PC. Offline version (so I can use it if there is no internet, for example plug USB and have last sync-ed data). Ability to store plain text (notes, for example). Should work on Windows, Linux and Mac. So far I have been happy with RoboForm, but its offline USB version is not available on Linux. Please recommend. Thanks, Dmitriy.

  Read the article

• Is proprietary vendor software required to use a wireless printer?

  - by sajee

  On Windows Vista, other than the driver, one can use a regular printer w/o any extra software, either plugged in via USB or over the network. I don't have to install extra software from the printer vendor to use the basic printer functionality. Is the same true for wireless printers? I need to install the HP 6000 wireless printer, and I hate installing vendor software other than the required drivers. So I'm wondering whether I need to install HP software on every PC that wants to use this printer? I haven't had a chance to read the manual but I'm hoping I don't have to. Can folks that have experience with wireless printers comment on whether vendor software, other than the printer driver, is required to use a wireless printer?

  Read the article

• Blinking motherboard power LED

  - by Corey D

  I was just rebuilding an old desktop PC to be used as a HTPC and the LED on the motherboard that indicates when there is power is blinking fairly rapidly. The only way I can get the machine to boot is to press the power button immediately after plugging it in, and even then I cannot make it into the BIOS. The power supply has more than enough juice to power all of the components, and is from a reputable manufacturer. The motherboard is an Asus and is about 4.5 years old. Is my power supply hosed? Or is it my motherboard?

  Read the article

• Virus sending phishing emails through exchange server

  - by therulebookman

  It appears that there is a virus on my network somewhere that is sending phishing emails through my exchange server. I can see the messages in message tracking and I see many SMTP errors for NDR's and rejected connections from external servers, but I do not see any SMTP authentications and I have logging up to MAX. How can I find the IP or hostname of the PC that is infected? Or is there some other explanation than virus? Anti-virus scan on server is clean. Server is not an open relay. Thanks

  Read the article

• add printer on windows 7 with vbscript and wmi

  - by Jessica

  I have a problem where I can't add a printer on my Windows 7 machine, because it fails with "The printer driver is unknown" (error code 1797) using WMI/VBScript. The thing is that the printer driver already exists on the PC. I've used AddPrinterConnection to connect to the remote printer queue, and the drivers get installed. I've confirmed they exist by a) Enumerating Win32_PrinterDriver with WBEMTEST utility which shows the driver, and also in the Printer Management MMC snap-in. Is there some other scriptable way I can get this to work? I'm adding a local TCP/IP port, pointing my new printer object instance to use that port and the driver from using AddPrinterConnection, and giving it a name, but it refuses to work...

  Read the article

• External hard drive encryption

  - by Kragen

  I've got a complete backup of my main PC on 1.5 TB external hard drive that I carry around with my laptop so I can have access to all of my files while I'm on the move, however it has just dawned on me that if someone nicks my external hard drive they now have access to everything! Hence I'm looking for a way to encrypt my external hard drive. I'm after something that is: Secure (if I need to carry around a USB dongle to keep the key on so be it) Fast (the performance of the drive should still be reasonable) Cross-platform (I regularly use other peoples computers - Sometimes they are not windows based and might not even have internet access, however I still want to be able to access my files) Cheap (preferably free / open source!)

  Read the article

• Internet Explorer 6 Encountered An Error ntl.dll Issue on XP and Win2000

  - by Gary B2312321321

  As we have some PC's still running Windows 2000 and this is beyond our control we use IE 6 so we can keep the IE platform standard. Recently on some XP and Win2000 PCs IE has been crashing with the Encountered a Problem and Needs to close do you want to send a message to Microsoft error when entering some sites. This happens even after a format reinstall with minimal software load (Office 2000, some avaya software, kaspersky, tapiex.dll). The module pointed to in the error report is ntl.dll. There are lots of reports over the net of the problem but has anyone resolved this issue? (Latest IE6 updates are installed). Also please note there were no 3rd party IE addons, spyware, viruses or adware Hope someone can help.

  Read the article

• How to "restart/repair" an USB port?

  - by Click Ok

  My laptop has two USB ports, but one is broken, so I use a USB hub in the other good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detect the mouse and the keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... Is there some method, software, etc. to "restart/repair" the USB port without restarting the PC?

  Read the article

< Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >