Search Results

Search found 20883 results on 836 pages for 'wont say'.

Page 638/836 | < Previous Page | 634 635 636 637 638 639 640 641 642 643 644 645  | Next Page >

  • Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

    - by jensendarren
    I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

    Read the article

  • apt-mirror does not mirror the i18n directory

    - by Fred
    I need to setup a local Ubuntu mirror so the whole network doesn't need to hit remote servers in order to update and install new packages. Following a brief tutorial found here, I managed to get a server up and running that correctly mirrors packages from the main and restricted categories. However, when I call apt-get update on a client, I get a couple of errors such as : Ign http://192.168.1.18 karmic/main Translation-fr Ign http://192.168.1.18 karmic/restricted Translation-fr Checking back on the server, I see that apt-mirror only took the binary-amd64 directory of the mirror, and didn't take i18n that would provide Translation-fr. The manpage for apt-mirror doesn't say anything about i18n, and Google is of no help either. How do I properly mirror i18n? My current mirror.list file is as follows : ############# config ################## # # set base_path /var/spool/apt-mirror # # if you change the base path you must create the directories below with write privileges # # set mirror_path $base_path/mirror # set skel_path $base_path/skel # set var_path $base_path/var # set cleanscript $var_path/clean.sh # set defaultarch <running host architecture> # set postmirror_script $var_path/postmirror.sh set run_postmirror 0 set nthreads 20 set _tilde 0 # ############# end config ############## deb http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive karmic main restricted deb http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive karmic-updates main restricted clean http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive

    Read the article

  • Route specific network traffic through vpn in virtualbox guest

    - by Sander
    I am running OSX with a windows server 2008 guest in Virtualbox. My goal is to route some of the network traffic in the host through the server guest. This is because the win2008 server has a VPN connection to my workplace using a Smartcard solution which can not operate on OSX. My current set-up is like this: OSX (Host): connected to the internet via en01 Win2008 (Guest): connected to the internet using NAT (lan1 in guest) has a SSTP VPN connection to my workplace is connected to the guest using an Host Only Adapter vboxnet0 (LAN2 in guest) The important part is about the host (OSX). Primarily I want all network traffic to just go through en01. However, all traffic which can only be accessed through the VPN must go through the guest and through the VPN. I have one specific FQDN which can only be accessed through the VPN (say corp.mycompany.com). I do not know much about networking. I thought I would be able to get it to work by bridging together LAN2 and LAN1 but this didn't seem to work this: http://archives.aidanfindlater.com/blog/2010/02/03/use-vpn-for-specific-sites-on-mac-os-x/ using a loopback adapter on WinXP (when I did not have win2008 yet, but this doesn't work because I can't create a PPTP connection) And I've also read about Routing and Remote Access but I have no idea on how to use this. Can someone help me in the right direction?

    Read the article

  • Constant CMS Session Expiry On 1&1 Cloud Server?

    - by leen3o
    I have a couple of 1&1's 'Dynamic Cloud Servers' and running Win2008R2 and they are setup as web servers, I have a number of Umbraco CMS installs on them and they have been running fine for over a year. On Saturday on BOTH servers, a very strange thing happened - As soon as I login to the CMS/Umbraco admin I am logged out with about 5 seconds? It's as if my session expires the moment I login? I have checked everything I can as I'm not really a server admin, and everything seems to be exactly as it was last week? Like I say this has happened EXACTLY the same time (Saturday) on TWO different servers? I'm just looking for ideas of what I should be looking for? Also the front end of the sites seem fine... Its only the backend when I login. I have gone to 1&1 about this, and as usual they have washed their hands saying its nothing to do with them - When I am certain it is. How can this happen on two different servers, and affect the same sites in exactly the same way? Any help, tips, things to try would be greatly appreciated.

    Read the article

  • What is the difference between these Pentium Extreme Edition CPUs?

    - by Giffyguy
    The CPU in question is the Pentium Extreme Edition 955. Intel's website shows four "versions", but for the most part they all look identical. They even share the same set of ordering codes. But one of them has a substantially lower TDP, which is seemingly unexplainable - since everything else is the same. Two of them say "LGA775, Tray" and I have no idea what "Tray" means either. Also, two of them have a different SPEC code. What I need to know is: What does "LGA775, Tray" mean? Why does the one CPU have a lower TDP? And what does that mean for me? Does that mean lower maximum power consumption? Does it mean the CPU may be more stable/endurant, because of a lower heat output? Why do two of them have a different SPEC code, and what does this mean? Finally, what does PLGA775 (as opposed to LGA775) mean, and do I need to be worried about that? Information from Intel's wbsite: Intel® Pentium® Processor Extreme Edition 955 (4M Cache, 3.46 GHz, 1066 MHz FSB) with SPEC Code 1 Boxed Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775 PLGA775 B1 95 Watts BX80553955 SL94N 2 Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775, Tray PLGA775 B1 130 Watts HH80553PH0994M SL94N 3 Boxed Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775 PLGA775 B1 130 Watts BX80553955 SL8WM 4 Intel® Pentium® Processor Extreme Edition 955 4M Cache, 3.46 GHz, 1066 MHz FSB LGA775, Tray PLGA775 B1 130 Watts HH80553PH0994M SL8WM

    Read the article

  • Subdomain not hitting new site?

    - by Abe Miessler
    I have an existing site at my.site.com and I would like to setup a staging subdomain (staging.my.site.com). I have my DNS setup and directing staging.my.site.com to my server, but for some reason the Web Site I created in IIS for it is not being hit. Instead when I go to staging.my.site.com it takes me to the original site. The site I created in IIS has a home directory that is totally different from the regular sites home directory. I have added one host header with the following information: IP Address: (All Unassigned) TCP port: 80 Host Header Value: staging.my.site.com I was under the impression that with the setup I described above hitting staging.my.site.com through a web browser would bring up the staging site, but it does not. Can anyone see what I am doing wrong? UPDATE: One thing I noticed is that in my A record I am mapping to the IP Address ( lets say 1.1.1.1 for this example). In the host headers for the main site (my.site.com) it has 1.1.1.1 as an entry. Is this normal? Could it cause the problem I am talking about?

    Read the article

  • libvirt's dnsmasq does not respond to dns queries or provide dhcp

    - by Jeremy
    This is on Ubuntu 10.04 server, using KVM to run Ubuntu guests. This system has been working for a long time and I have not changed anything (other than applying security updates), but today I found dnsmasq no longer responds to requests. I cannot say how long this has been broken for me because I don't frequently use the NAT'd guests. So it could have started just after the last updates or some other event and I just now found it. I can connect to port 53 with telnet at 192.168.122.1. I've flushed ip-tables to be sure it wasn't firewall rules and that is not the problem. dnsmasq is running, virsh reports default network as stared. I can't find ANY information on troubleshooting libvirt dnsmasq except that it won't play well with other instances of dnsmasq, which is not the problem. I cannot even find where log entries might be for this service. Any ideas on where to look for more information? edit to add: I added another network and that one works fine. I guess I have a workaround but would still like to figure out how to troubleshoot this problem.

    Read the article

  • Use subpath internal proxy for subdomains, but redirect external clients if they ask for that subpath?

    - by HostileFork
    I have a VirtualHost that I'd like to have several subdomains on. (For the sake of clarity, let's say my domain is example.com and I'm just trying to get started by making foo.example.com work, and build from there.) The simplest way I found for a subdomain to work non-invasively with the framework I have was to proxy to a sub-path via mod_rewrite. Thus paths would appear in the client's URL bar as http://foo.example.com/(whatever) while they'd actually be served http://foo.example.com/foo/(whatever) under the hood. I've managed to do that inside my VirtualHost config file like this: ServerAlias *.example.com RewriteEngine on RewriteCond %{HTTP_HOST} ^foo\.example\.com [NC] # <--- RewriteCond %{REQUEST_URI} !^/foo/.*$ [NC] # AND is implicit with above RewriteRule ^/(.*)$ /foo/$1 [PT] (Note: It was surprisingly hard to find that particular working combination. Specifically, the [PT] seemed to be necessary on the RewriteRule. I could not get it to work with examples I saw elsewhere like [L] or trying just [P]. It would either not show anything or get in loops. Also some browsers seemed to cache the response pages for the bad loops once they got one... a page reload after fixing it wouldn't show it was working! Feedback welcome—in any case—if this part can be done better.) Now I'd like to make what http://foo.example.com/foo/(whatever) provides depend on who asked. If the request came from outside, I'd like the client to be permanently redirected by Apache so they get the URL http://foo.example.com/(whatever) in their browser. If it came internally from the mod_rewrite, I want the request to be handled by the web framework...which is unaware of subdomains. Is something like that possible?

    Read the article

  • Transferring an SQL Processor License to a virtual hosted environment

    - by Andrew Shepherd
    My company is currently hosting a service in-house, and we want to move to an externally hosted environment. We would then be using a virtual server. I understand that this might be spread across multiple machines, but from my perspective as a customer, this layer is abstracted away - I shouldn't know or care about the hardware that the OS is hosted on. We have a licensed edition of SQL Server 2008. This is one Processor license. Will it be a violation of the licensing agreement to use this in a virtual environment. From the reference guide here it says When licensed Per Processor With Workgroup, Web, and Standard editions, for each server to which you have assigned the required number of per processor licenses, you may run, at any one time, any number of instances of the server software in physical and virtual operating system environments on the licensed server. However, the total number of physical and virtual processors used by those operating system environments cannot exceed the number of software licenses assigned to that server For enterprise edition there is an added option: if all physical processors in a machine have been licensed, then you may run unlimited instances of SQL server 2008 in one physical and an unlimited number of virtual operating environments on that same machine. I'm having trouble getting my head around this. Would I theoretically have to get a license for every processor in this virtual environment (which is effectively impossible because I have no way of knowing how many processors there actually are)? Or can I just say that it's hosted on one "virtual" server, so that's OK?

    Read the article

  • Can a website company that builds 4-5 websites a year afford dedicated hosting?

    - by Petras
    We manage about 30 websites that use shared ASP.NET SQL Server web hosting. These are typical small/medium business websites and they perform fine in this environment. Recently I was looking at VPS hosting in this thread http://serverfault.com/questions/128329/how-do-you-host-multiple-public-facing-websites-on-a-vps After contacting a provider in one of the replies I was told that VPS hosting is not recommended for 30 sites, even if they are small. The resource requirements might be too great even for VPS. So I should turn to dedicated hosting. The lowest cost dedicated hosting is $219 per month (see http://www.serverintellect.com/dedicated/pentiumdservers.aspx). But this is only for a single processor which seems too light for a machine running both IIS and SQL. In our office all the developers work on quad cores so I assume I’d really need the Quad Processor. However, this starts at $599 monthly. Now, I won’t be able to transfer all of our 30 sites to this machine. I’d only be able to transfer say 5 or 6. However, moving forward, I’d be able to host all future sites on this machine. This amounts to 4-5 per year. Let’s look at the economics. Shared hosting costs are typically $16.95 monthly (see http://www.crystaltech.com/dotnet.aspx). So here’s the dilemma First months costs: $599 First month revenue: 6x$16.95 = $101.7 Loss in first month: $497.3 First year costs: $599x12=$7188 First month revenue: 6x$16.95x12 + 5x$16.95x6(averaged) = $1728.9 Loss in first year: $5459.1 Clearly it is going to take years for this server to pay for itself. It just doesn’t seem economical! Am I missing something here, or is dedicated not the way to go with the amount of sites we build?

    Read the article

  • Sane patch schedule for Windows 2003 cluster

    - by sixlettervariables
    We've got a cluster of 75 Win2k3 nodes at work in a coarse grained compute cluster. The cluster is behind a mountain of firewalls and resides in its own VLAN. Jobs of all sizes and types run on the cluster and all of the executables running are custom-made. (ed: additional notes on our executables) The jobs range from 30 seconds to 7 days in duration, and may contain one executable or 2000 sub-jobs (of short duration). Obviously we are trying to avoid the situation where our IT schedules a reboot during a 7 day production job. We have scheduling software which accomodates all of the normal tasks for a coarse grained cluster and we can control which machines are active for submission, etc. If WSUS was in some way scriptable (or the client could state it's availability for shutdown) we could coordinate the two systems and help out. Currently, the patch schedule is the Sunday after Super Tuesday regardless of what is running on the cluster. We have to ask for an exemption every time we want to delay patching a machine for a long running production job. Basically, while our group is responsible for the machines we have little control over IT's patch schedule. Is patching monthly with MS's schedule sane for a production Windows cluster? Are there software hooks in WSUS where we could say, "please don't reboot just yet"?

    Read the article

  • HTTP request hangs for for exactly 150 seconds, then gives incomplete response. How do I find out wh

    - by Nathan
    I am hosting a Wordpress blog, and having a strange problem. When I connect to the server (http://71.65.199.125/ at the time of this writing) it displays the Title correctly, and half of a download bar, indicating it has received some of the page, then it hangs for exactly 150 seconds (timed it twice), then it sends the rest of the page, but without the stylesheet. after that it hangs indefinitely, continuing to say "connecting..." without making any progress. If you have any clues as to what might be happening, or how I could print debug logs of PHP or something to see what it is looking for during that hang time that would probably help. recent changed I have made: switched wordpress themes, however I did see it work once with the new theme. moved the server to another building, with an identical ISP, and linksys router forwarding setup. I have also added a favicon.gif file to /var/www but without linking to it from any of the wordpress pages. I have also had a unanticipated power interruption. System info: Ubuntu debian 9.04 Apache2 PHP 5 Wordpress 2.9.2 Thank you

    Read the article

  • Reliable custom Windows shortcut keys?

    - by Peter Baer
    I have global Windows shortcut keys assigned to several different cmd.exe instances. I do this by creating shortcuts to cmd.exe on my desktop, and assigning each one a unique shortcut key (for example, CTRL + SHIFT + U). Pretty basic stuff. I'm using Win2K8 (R1 and R2). This works just fine... most of the time. But with infuriating regularity, sometimes it doesn't. Or it will work with a long delay (many seconds). It doesn't matter what app currently has focus (it can even be one of the command prompts). It doesn't matter what keys I assign (I've tried a few variations of WIN, CTRL and SHIFT). I did notice that this is often, but not always, correlated with explorer.exe struggling in some way or another (say, an explorer window opened to a file share that's unavailable, or an app being unresponsive, or whatever). In other words the shortcut key handling appears to be very sensitive to unrelated system activity. Note that whenever I have this problem I can always successfully ALT + TAB to the window I want to get to, but that's tedious. I use the shortcuts to these command windows hundreds of times a day so even a 1% failure rate becomes really annoying. Is there a way to fix this, or is there some third-party utility out there that will RELIABLY intercept custom key combinations to bring focus to whatever apps I want, in a way that is independent of other system activity? ADDENDUM: There is a property of the Windows shortcuts that I would not want to lose if switching to a third-party hotkey tool: Windows shortcuts are idempotent. Once you've launched a shortcut to some app, pressing the shortcut key combo again takes you to the already launched process - it does not launch a new process.

    Read the article

  • Domain Trust 2008 to 2003

    - by nick3216
    I'm having trouble setting up the trust relationship between a Windows Server 2003 and a Windows Server 2008 AD. Domain a is Windows Server 2003 Forest functional level. Domain b is a Windows Server 2008 Forest functional level. I can set up the incoming side of the trust relationship on domain "a" so that it trusts domain "b". Try as I might on domain "b" I can't set up the outgoing side of the trust relationship to domain "a". The GUI interface gives an unhelpful 'The request is not supported'. I'm not sure netdom is being more or less helpful as it refers me to FilterSIDs netdom trust /add b /uo:b\admin /po:* /d:a /ud:a\admin /pd:* /oneside:trusting To improve the security of this external trust, security identifier (SID) filtering is enabled, however, if users have been migrated to the trusted domain and their SID histories have been preserved, you may choose to turn off this feature. For more information about SID filtering and how to turn it off, see the help for netdom trust /FilterSids or see Help and Support. The request is not supported. The command failed to complete succesfully. I say 'less helpful' because Windows Server 2008 doesn't support the /FilterSIDs option. How can we force creation of this trust? Edit: Just to clarify I've checked that the [Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options] "Network access: Allow anonymous SID/Name translation” is enabled on both sides of the trust as per http://social.technet.microsoft.com/Forums/en/winserverDS/thread/cc61fc25-3569-4413-bbfd-92390eb31118

    Read the article

  • Memory Usage of SQL Server

    - by Ashish
    SQL Server instance on my server is using almost full memory available in my Physical Server. Say if i am having 8GB of RAM than SQL Server is using 7.8 GB of RAM from system. I also have read articles and also read many similar questions regarding same on this forum and i understand that memory is reserved and it is using memory. But i have 2 same servers and 2 SQL Servers, why this is happening on a single SQL Instance not on other. Also when i run DBCC MemoryStatus than it is showing up... VM Reserved 8282008 VM Committed 537936 so from this we know that SQL reserved whole 8GB memory, but why this VM Committed keeps increasing. What i understand is VM Committed is: VM Committed: This value shows the overall amount of VAS that SQL Server has committed. VAS that is committed has been associated with physical memory. So this is the memory SQL Server has committed (from this i understand that physical memory actually SQL Server is using at instance). So like to know the reason behind this ever increasing VM Committed memory on my server and not on another. Thanks in Advance.

    Read the article

  • Odd log entries when starting up PotgreSQL

    - by Shadow
    When restarting pgSQL, I get the following log entries: 2010-02-10 16:08:05 EST LOG: received smart shutdown request 2010-02-10 16:08:05 EST LOG: autovacuum launcher shutting down 2010-02-10 16:08:05 EST LOG: shutting down 2010-02-10 16:08:05 EST LOG: database system is shut down 2010-02-10 16:08:07 EST LOG: database system was shut down at 2010-02-10 16:08:05 EST 2010-02-10 16:08:07 EST LOG: autovacuum launcher started 2010-02-10 16:08:07 EST LOG: database system is ready to accept connections 2010-02-10 16:08:07 EST LOG: connection received: host=[local] 2010-02-10 16:08:07 EST LOG: incomplete startup packet 2010-02-10 16:08:07 EST LOG: connection received: host=[local] 2010-02-10 16:08:07 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:08 EST LOG: connection received: host=[local] 2010-02-10 16:08:08 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:08 EST LOG: connection received: host=[local] 2010-02-10 16:08:08 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:09 EST LOG: connection received: host=[local] 2010-02-10 16:08:09 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:09 EST LOG: connection received: host=[local] 2010-02-10 16:08:09 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:10 EST LOG: connection received: host=[local] 2010-02-10 16:08:10 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:10 EST LOG: connection received: host=[local] 2010-02-10 16:08:10 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:11 EST LOG: connection received: host=[local] 2010-02-10 16:08:11 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:11 EST LOG: connection received: host=[local] 2010-02-10 16:08:11 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:12 EST LOG: connection received: host=[local] 2010-02-10 16:08:12 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:12 EST LOG: connection received: host=[local] 2010-02-10 16:08:12 EST FATAL: password authentication failed for user "postgres" 2010-02-10 16:08:12 EST LOG: connection received: host=[local] 2010-02-10 16:08:12 EST LOG: incomplete startup packet My question regarding a potential consequence of this is posted here: http://stackoverflow.com/questions/2238954/mdb2-says-connection-failed-db-logs-say-otherwise , but I didn't realize this was happening when I asked that question, and I figured this [part of the] problem is for SF. Edit: I can connect to the database and manipulate things normally with the psql CLI and the postgres user.

    Read the article

  • Find slow network nodes between two data centers

    - by 2called-chaos
    I've got a problem with syncing big amount of data between two data centers. Both machines have got a gigabit connection and are not fully occupied but the fastest that I am able to get is something between 6 and 10 Mbit = not acceptable! Yesterday I made some traceroute which indicates huge load on a LEVEL3 router but the problem exists for weeks now and the high response time is gone (20ms instead of 300ms). How can I trace this to find the actual slow node? Thought about a traceroute with bigger packages but will this work? In addition this problem might not be related to one of our servers as there are much higher transmission rates to other servers or clients. Actually office = server is faster than server <= server! Any idea is appreciated ;) Update We actually use rsync over ssh to copy the files. As encryption tends to have more bottlenecks I tried a HTTP request but unfortunately it is just as slow. We have a SLA with one of the data centers. They said they already tried to change the routing because they say this is related to a cheap network where the traffic gets routed through. It is true that it will route through a "cheapnet" but only the other way around. Our direction goes through LEVEL3 and the other way goes through lambdanet (which they said is not a good network). If I got it right (I'm a network intermediate) they simulated a longer path to force routing through LEVEL3 and they announce LEVEL3 in the AS path. I basically want to know if they're right or they're just trying to abdicate their responsibility. The thing is that the problem exists in both directions (while different routes), so I think it is in the responsibility of our hoster. And honestly, I don't believe that there is a DC2DC connection which only can handle 600kb/s - 1,5 MB/s for weeks! The question is how to detect WHERE this bottleneck is

    Read the article

  • 802.11g -> wired ethernet bridging not working

    - by Malachi
    Usually people want to go the other direction, but I want to take our relatively fast and stable house 802.11g signal and bridge it to ethernet. I have tried using an Airport Express (the b/g flavor) and my i7 MacBook pro, both to no avail. Word is that the b/g flavor of This flavor of Airport Express maxes at firmware 6.3 which doesn't support this kind of bridging properly. However, I expected my MacBook pro to do the job with its "Internet Sharing" feature. Alas, although my wired PC does sort of see it, it doesn't work out. Strangely, using DHCP the PC receives the same IP address as my MBP uses on the network. Less strangely, but still surprisingly, the wired ethernet port on my mac registers as the IP address of the gateway when queried with IFCONFIG. It sort of makes sense that the mac would "pretend" to be the gateway, but the whole thing just isn't working and seems configured wrong - but all the docs I see say basically "OS X Internet Sharing: click it and go". What do I do? Do i really have to buy more hardware, even though I have plenty of would-be candidates for bridging? Incidentally, the host router originating the 802.11g signal is a belkin 802.11g router, and is documented to support WDS.

    Read the article

  • Someone from china wants kill my entry bandwidth??

    - by yes123
    Hi guys. Someoen from china with two different ip is downloading the same big file from my server. Their ip are: 122.89.45.210 60.210.7.62 They requesting this file and downloading more than 20 times per minute. What Can I do to prevent this? (I am on gentoo with root access) And WHY they do this to a site that doesn't have nothing to do with china ? ADD1: Other ips: 221.8.60.131 124.67.47.56 119.249.179.139 60.9.0.176 ADD2: the stupid thing is they are requesting only 1 single file lol. Or they want that file removed (tho i don't see why) Or they are pretty stupid ADD3: Situation is getting worse. IP are spreading from other countries too (usa and korea if www.geobytes.com/iplocator.htm it's right) And now they are requesting another file. ADD4: it seems after they realized i removed that file they stopped attacking me. I will monitor the situation. They started again after a sleep of 3-4 mintues with the same file (lucky me). Hard to say why this is happening

    Read the article

  • How to migrate Fedora DS (389 DS) to a new machine?

    - by zengr
    Hello, I am trying to migrate a Fedora DS (1.2.2) to a new server (1.2.7.5). The process has been painful to say the least. The old server (1.2.2) was also an upgrade from an old fedora DS setup, so it does not contain migrate-ds-admin.pl. I found this question, but the URL does not open. I am aware that I need to use migrate-ds-admin.pl, but I am clueless. How do I use it? I assume this works like this: 1. Copy migrate-ds-admin.pl from server which has 1.2.7 to 1.2.2 2. Run migrate-ds-admin.pl to export the schema+ldif from 1.2.2 3. Import the schema+ldif to 1.2.7 using migrate-ds-admin.pl. If the above is true, then what parameters are need for export and import? Note: ./ldif2db -n NetscapeRoot -i /root/NetscapeRoot.ldif ./ldif2db -n userRoot -i /root/userRoot.ldif The above two commands work like a charm, but since the schema (custom schema) is not migrated, I see alot of errors during import.

    Read the article

  • Using NFS for scalable PHP/MySQL web application

    - by Jeroen Moons
    Here's the situation: I have a PHP/MySQL web application that accepts user uploads (pdf files). From these pdf files' pages a preview image is made on the fly and presented to the web app's users. Some pdfs might be on the large side, most will be under 50 MB but some extreme cases could be as large as a few hundred MB. A little waiting for the preview image for large pdf files is acceptable but no more than a minute let's say. Everything is running on one server for now, but soon the app will hit the server's limit on both storage and processing power. My idea to solve the problem: To deal with this situation I had the idea of having one or more pdf processing servers as needed, and one or more file storage servers. These two types of servers are mounted to the server on which the actual app runs using NFS. The app could then use GearMan to delegate pdf processing tasks to these processing servers. The processing server can mount the storage server and read the file stored there, process it and write its output to that server. The servers I'm talking about will be amazon ec2 instances. The web app returns a link to the resulting pdf preview image on the storage server that was used which can then be used on the front end to show the image to the user. My question: I have zero experience with apps that use multiple servers, is this idea viable or is there a better way to do it? Is an NFS setup fast and reliable enough for this situation?

    Read the article

  • What is proper relationship between /etc/hosts and DNS A records for a Linux server?

    - by MountainX
    I have an Ubuntu server. It is going to be a web server with a URI of www.example.com. I have a DNS A record pointing www.example.com to the server's IP address. Let's say I pick "trinity" as the hostname for this server. I want to set up the DNS records correctly. I need reverse DNS to www.example.com, so a CNAME for www.example.com doesn't seem appropriate. Here's my question: Is it considered best practice to set up two DNS records (which in my case would likely be two A records), one for www.example.com and one for trinity.example.com, both pointing to this server's IP address? (Or, even if it is not accepted as a best practice, is it a good idea?) If so, would the following be a proper /etc/hosts file? $ cat /etc/hosts 127.0.1.1 trinity.local trinity 99.100.101.102 trinity.example.com trinity www.example.com This server is a Linode and Linode's docs seem to imply that the above approach is best (if I am reading them correctly). Here's the relevant section. I bolded the line that seems to apply here. Update /etc/hosts Next, edit your /etc/hosts file to resemble the following example, replacing "plato" with your chosen hostname, "example.com" with your system's domain name, and "12.34.56.78" with your system's IP address. As with the hostname, the domain name part of your FQDN does not necesarily need to have any relationship to websites or other services hosted on the server (although it may if you wish). As an example, you might host "www.something.com" on your server, but the system's FQDN might be "mars.somethingelse.com." File:/etc/hosts 127.0.0.1 localhost.localdomain localhost 12.34.56.78 plato.example.com plato The value you assign as your system's FQDN should have an "A" record in DNS pointing to your Linode's IP address. For more information on configuring DNS, please see our guide on configuring DNS with the Linode Manager.

    Read the article

  • Why doesn't Mail.app properly thread Microsoft Outlook replies?

    - by thepurplepixel
    I use Mail.app 3.6 (on 10.5 Leopard), and I always use plain-text email. Normally, when I receive an email reply from practically anyone, it looks like this (test message sent from Mail.app, replied from Hotmail, replied from Google Apps): Needless to say, I quite like this threading, and it keeps everything very visually-organized. However, when I receive a plain-text email reply from people on Microsoft Outlook (tested with Outlook 2003 & 2007), it isn't threaded like the image. Instead, it appears as below, without being threaded nicely. My reply to the message. -----Original Message----- From: Tyson Moore [mailto:[email protected]] Sent: [Date] To: [Receiver] Subject: Test Original message. Through looking at the source of my original message, it appears as though every time the message is quoted, less-than signs (<) are inserted before every line in the reply. I am assuming this is what triggers the quoting behaviour exhibited by Mail.app, but I'm no expert. My question: is this a Mail.app limitation in not recognizing the -----Original Message----- line put in by Outlook, or an Outlook problem not inserting > before every line in a reply (or both)?

    Read the article

  • Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

    - by WerkkreW
    I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

    Read the article

  • Making it Easier for Older Users to Login to Multiple Accounts

    - by Mike Hagstrom
    I currently do consulting for a small business that has multiple applications that they need to login too. I'm trying to get them to start using Basecamp and Zendesk to make all of our lives easier when it comes to collaboration on big projects and quick helpdesk ticket items. However, I have recently been informed that it is difficult for them to remember all of these websites etc... to login too. However the login information is the same. Right now they have to login to: Windows Login Gmail I want them additionally to login to Basecamp Zendesk This is just a generation or two gap between myself and them, so I'm wondering what others do to solve these problems. Is there some way we could configure USB thumbdrives that somehow have Lastpass or something on that when plugged into the computer automatically log them into their Windows account, then when they were to say visit the Basecamp account would automatically log them into that? I think the security risk (of a list thumbdrive) is well worth the ability to use these extra applications. Unless anyone else has any other ways for making it easier for users to login to multiple sites.

    Read the article

< Previous Page | 634 635 636 637 638 639 640 641 642 643 644 645  | Next Page >