Search Results

Search found 8959 results on 359 pages for 'bad decisions'.

Page 64/359 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• CORAID using only 1 of the 2 available NICs for AoE traffic

  - by Peter Carrero

  We got 6 CORAID shelves in my workplace. On 2 of them I see AoE traffic on only 1 of the 2 NICs that are attached to the SAN switch. We got jumbo frames enabled on all devices. Both NICs show up when I issue the aoe-interfaces command. This wouldn't bother me too much if the throughput performance observed on the "bad" shelves using bonnie++ wasn't half of the result of the "good" shelves. The "good" shelves are older SR1521 model and they have ReiserFS on their LUNS - not that I think it makes a difference - and the "bad" shelves are newer SR2421 model and have JFS. Any help as to what is going on and how to rectify this would be greatly appreciated. BTW: even the lower performing shelves outperform another iSCSI device we got, but that is another story... Thanks.

  Read the article

• How do I send traffic from my Mac's wifi to my VPN client?

  - by Heath Borders

  I need to connect my Android to a Juniper VPN. Unfortunately, Juniper doesn't support Android on our VPN version. We've already put in a feature request for it, but we have no idea how long it will take to be complete. Right now, I connect to the Juniper VPN with a Juniper Mac OSX VPN client that uses Java to install kernel extensions to start and stop the VPN. Thus, I can't use the Network panel in System Preferences to create a VPN device, which means it won't show up in the 'Sharing' panel's Internet Sharing Share your connection from: menu, as suggested here. I used newproc.d to see what /usr/libexec/InternetSharing did when it ran, and it runs the following processes: 2013 Nov 1 00:26:54 5565 <1> 64b /usr/libexec/launchdadd 2013 Nov 1 00:26:55 5566 <1> 64b /usr/libexec/InternetSharing 2013 Nov 1 00:26:56 5568 <5566> 64b natpmpd -d -y bridge100 en0 2013 Nov 1 00:26:56 5569 <1> 64b /usr/libexec/pfd -d 2013 Nov 1 00:26:56 5567 <5566> 64b bootpd -d -P My Juniper VPN client creates the following devices (output of ifconfig): jnc0: flags=841<UP,RUNNING,SIMPLEX> mtu 1400 inet 10.61.9.61 netmask 0xffffffff open (pid 920) jnc1: flags=841<UP,RUNNING,SIMPLEX> mtu 1450 closed So, it seems like I should just be able to do this and have everything work: sudo killall -9 natpmpd sudo /usr/libexec/natpmpd -y bridge100 jnc0 My android connected fine and could hit public internet sites, but it couldn't hit private VPN sites. I assume this is because I need to change the routes that /usr/libexec/InternetSharing sets up. This is the output from sudo pfctl -s all before starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all rdr-anchor "com.apple/*" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble anchor "com.apple/*" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all INFO: Status: Disabled for 0 days 00:11:02 Debug: Urgent State Table Total Rate current entries 0 searches 22875 34.6/s inserts 1558 2.4/s removals 1558 2.4/s Counters match 2005 3.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 0.0/s proto-cksum 0 0.0/s state-mismatch 1 0.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 OS FINGERPRINTS: 696 fingerprints loaded This is the output from sudo pfctl -s all after starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all nat-anchor "com.apple.internet-sharing" all rdr-anchor "com.apple/*" all rdr-anchor "com.apple.internet-sharing" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble scrub-anchor "com.apple.internet-sharing" all fragment reassemble anchor "com.apple/*" all anchor "com.apple.internet-sharing" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all STATES: ALL tcp 10.0.1.32:50593 -> 74.125.225.113:443 SYN_SENT:CLOSED ALL udp 10.0.1.32:61534 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:55433 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:64041 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL tcp 10.0.1.32:50619 -> 74.125.225.131:443 SYN_SENT:CLOSED INFO: Status: Enabled for 0 days 00:00:01 Debug: Urgent State Table Total Rate current entries 5 searches 22886 22886.0/s inserts 1563 1563.0/s removals 1558 1558.0/s Counters match 2010 2010.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 12.0/s proto-cksum 0 0.0/s state-mismatch 1 1.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 TABLES: OS FINGERPRINTS: 696 fingerprints loaded It looks like I need to change the pf settings that /usr/libexec/InternetSharing set up, but I have no idea how to do that.

  Read the article

• Linksys WRT54G2 not showing connected PC's in DHCP table

  - by Moose

  For some reason all of a sudden my linksys WRT54G2 no longer shows PC's connected in the DHCP table. It was being touchy then all of a sudden they all just disappeared. It showed 2 of the 4 connected then it showed the other 2 then it only showed 1 and then it was showing none. I seem to be having a connection reset every 30-60 minutes also not sure if that is related to the router going bad or if it is just comcast being it's typical crappy self. I have tried to reset my router and my cable modem and both problems still seem to keep happening(no PC's in table and connection reset every 30-60 mins). Now I know the router doesn't store clients after a router reboot but they normally show up within a matter of minutes for me in the past. Before anyone asks yes all devices on the network are using DHCP and not static. Could this be a sign of the router starting to go bad?

  Read the article

• Boot drive is incorrect one.

  - by Dwayne

  I have several hard drives installed. I normally use c: as my boot drive and a much larger drive (h:) for storing most of my files. I found a subfolder in my c:windows folder named windows after a failed reinstall of Vista. Upon inspection I determined it to be older than the c:windows folder and therefore it must be the older, working version of the boot. I renamed the c:windows folder to c:windows.bad and moved the sub windows to the c: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the c: copy and can I delete the c:windows.bad file set?

  Read the article

• How to make ClearType looks ok even with large fonts

  - by Sorin Sbarnea

  I discovered that on large/huge fonts ClearType does have a negative impact. Just take a look at http://patterns.dataincubator.org/book/ page (check title with huge fonts versus normal text). If you are on Windows 7 you can use Win+Plus/Minus to zoom in/out. I'm looking for a configuration that would make both small fonts and large fonts look well. The system is Windows 7 but I suppose you could replicate the problem on Vista and even XP if you activate ClearType. Current results: ClearType on and tunned - small fonts looking good and large one looking bad ClearType off - small fonts looking bad and large one looking ok (smoothed)

  Read the article

• How can I enable anonymous access to a Samba share under ADS security mode?

  - by hemp

  I'm trying to enable anonymous access to a single service in my Samba config. Authorized user access is working perfectly, but when I attempt a no-password connection, I get this message: Anonymous login successful Domain=[...] OS=[Unix] Server=[Samba 3.3.8-0.51.el5] tree connect failed: NT_STATUS_LOGON_FAILURE The message log shows this error: ... smbd[21262]: [2010/05/24 21:26:39, 0] smbd/service.c:make_connection_snum(1004) ... smbd[21262]: Can't become connected user! The smb.conf is configured thusly: [global] security = ads obey pam restrictions = Yes winbind enum users = Yes winbind enum groups = Yes winbind use default domain = true valid users = "@domain admins", "@domain users" guest account = nobody map to guest = Bad User [evilshare] path = /evil/share guest ok = yes read only = No browseable = No Given that I have 'map to guest = Bad User' and 'guest ok' specified, I don't understand why it is trying to "become connected user". Should it not be trying to "become guest user"?

  Read the article

• Godaddy hosting with dynamic ip?

  - by Razor Storm

  I bought a domain name on godaddy.com let's call it www.website.com, but my server has a dynamic ip, how do I resolve this issue? What I've tried: get a dns account at dyndns.com let's call it dns.dyndns.com, so I set up godaddy to forward the domain to dns.dyndns.com. problem: When the user goes to www.website.com, they see dns.dyndns.com in the url bar. Bad So then I set up the forwarding on godaddy to forward with domain masking, but then the problem is now that users can't even see url paths/get queries/ or hash marks anymore! `www.website.com/folder/search?id=4#ajax=4` becomes just www.website.com in the url bar. bad! What do I do?

  Read the article

• linux refused to mount a valid partition

  - by greg

  My setup is a linux box with 1 partition used thought LVM - has been working for years. I add a freeze and after the reboot the partition cannot be mounted: mount -r -t ext3 /dev/pve/data /mnt/pve-data mount: wrong fs type, bad option, bad superblock on /dev/mapper/pve-data, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so However fsck doesn't see any problem with it: fsck.ext3 -fp /dev/pve/data /dev/pve/data: 3024076/60366848 files (0.6% non-contiguous), 156921642/241435648 blocks There's nothing in dmegs nor the syslog. I'm puzzled, what's wrong with my partition? Thanks in advance greg debian 5.0.10 LVM 2.02.39

  Read the article

• Running a Check-Disk (Is it dangerous)

  - by vaccano

  I have a lap top that a friend of mine would like me to fix. It is giving a blue screen on boot up. When I looked up the error message it indicates that I should run a check disk. Is this dangerous? Should I try to off load stuff from the hard drive first? I ask because I had a hard drive of my own that when I ran check disk it wiped a bunch of "bad sectors" and I lost most of the info on it (but it had been going bad). Opinions?

  Read the article

• OS X 10.6 Snow Leopard no longer mounting an external USB drive

  - by Brant Bobby

  I have a 1TB generic external hard drive containing a single HFS partition. I originally formatted this using Disk Utility and it worked fine. Now, for some reason, it's not auto-mounting when I start up. Using mount at the command line gives the following error: $ sudo mount /dev/disk1s2 /Volumes/Test /dev/disk1s2 on /Volumes/Test: Incorrect super block. ... but if I use the mount_hfs command it works fine, mounts, and is readable. $ mount_hfs /dev/disk1s2 /Volumes/Test/ fsck gives me an error about a bad super block: $ fsck /dev/disk1 ** /dev/rdisk1 (NO WRITE) BAD SUPER BLOCK: MAGIC NUMBER WRONG ... but fsck_hfs -fn /dev/disk1s2 doesn't find any problems and reports that the volume appears to be OK. In Disk Utility, the drive appears to have a single MS-DOS partition with a curious notice about how it appears to be partitioned for Boot Camp: I have the Boot Camp HFS driver installed in WIndows 7, and that OS sees the drive/partition normally. What's wrong with my disk?

  Read the article

• kernel: journal commit I/O error

  - by jasondewitt

  I am having some problems with a Dell 1950 server. I am installing RHEL 4.6 along with Oracle and some other software on here. I am randomly getting an error message saying "kernel: journal commit I/O error" on my ssh session and on the monitor I have hooked up to the server I see an error scrolling by that says "EXT3-fs error (device sda5) in start_transaction: Journal has aborted." It has happened several times but never at the same point during the install. Actually, this last time the system was up and running and I was just trying to import a database into oracle. This has happened on several hard drives, so I'm pretty sure that is not the problem. This makes me think the raid controller is going bad. What do you guys think? ** UPDATE ** Pretty sure it was a bad hard drive. I threw another drive in the server and it's been running for about 48 hours with out problems.

  Read the article

• Unusual Apache->Tomcat caching issue.

  - by iftrue

  Right now, I have an Apache setup sitting in front of Tomcat to handle caching. This setup has been given to an external service to manage, and since the transition, I've noticed odd behavior. Specifically, when I request a swf file from the web server, I hit the Apache cache (good), but occasionally I'll receive a truncated file. Once I receive this truncated file, the cache will NOT refresh until I manually delete the cache and let the swf pull down from tomcat again. The external service claims that the configuration is fine, but I don't see any way this could be happening aside from improper configuration. Now, there are two apache and two tomcat servers under a load balancer, and occasionally one apache cache will break while another does not (leading to 50% of all requests getting bad, truncated data). Where should I start looking to debug this issue? What could POSSIBLY be causing this odd behavior? Edit: Inspecting the logs, tomcat throws this: java.io.IOException: Bad file number at java.io.FileInputStream.readBytes(Native Method) at java.io.FileInputStream.read(FileInputStream.java:199) at java.io.BufferedInputStream.read1(BufferedInputStream.java:256) at java.io.BufferedInputStream.read(BufferedInputStream.java:317) at java.io.FilterInputStream.read(FilterInputStream.java:90) at org.apache.catalina.servlets.DefaultServlet.copyRange(DefaultServlet.java:1968) at org.apache.catalina.servlets.DefaultServlet.copy(DefaultServlet.java:1714) at org.apache.catalina.servlets.DefaultServlet.serveResource(DefaultServlet.java:809) at org.apache.catalina.servlets.DefaultServlet.doGet(DefaultServlet.java:325) at javax.servlet.http.HttpServlet.service(HttpServlet.java:690) at javax.servlet.http.HttpServlet.service(HttpServlet.java:803) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:568) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.ha.session.JvmRouteBinderValve.invoke(JvmRouteBinderValve.java:209) at org.apache.catalina.ha.tcp.ReplicationValve.invoke(ReplicationValve.java:347) at org.terracotta.modules.tomcat.tomcat_5_5.SessionValve55.invoke(SessionValve55.java:57) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286) at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190) at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:283) at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:767) at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:697) at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:889) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690) at java.lang.Thread.run(Thread.java:619) followed by access_log.2009-12-14.txt:1.2.3.4 - - [14/Dec/2009:00:27:32 -0500] "GET /myApp/mySwf.swf HTTP/1.1" 304 - access_log.2009-12-14.txt:1.2.3.4 - - [14/Dec/2009:01:27:33 -0500] "GET /myApp/mySwf.swf HTTP/1.1" 304 - access_log.2009-12-14.txt:1.2.3.4 - - [14/Dec/2009:01:39:53 -0500] "GET /myApp/mySwf.swf HTTP/1.1" 304 - access_log.2009-12-14.txt:1.2.3.4 - - [14/Dec/2009:02:27:38 -0500] "GET /myApp/mySwf.swf HTTP/1.1" 304 - So apache is caching the bad file size. What could possibly be causing this, and possibly separate, how do I ensure that this exception does not get written to cache?

  Read the article

• How do I repair the corrupted files found by sfc /scannow? "Windows Resource Protection found corrupt files but was unable to fix some of them."

  - by galacticninja

  After running chkdsk C: /F /R and finding out that my hard disk has 24 KB in bad sectors (log is posted below), I decided to run Windows 7's System File Checker utility (sfc /scannow). SFC showed the ff. message after I ran it: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log." Since the CBS.log file is too large, I ran findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt" (as per Microsoft's KB 928228 article) to only get the log text pertaining to the corrupt files. (log is also posted below) How do I troubleshoot and repair the corrupted files mentioned by sfc /scannow? My OS is Windows 7, 64-bit. chkdsk log Checking file system on C: The type of the file system is NTFS. A disk check has been scheduled. Windows will now check the disk. CHKDSK is verifying files (stage 1 of 5)... 936192 file records processed. File verification completed. 25238 large file records processed. 0 bad file records processed. 4 EA records processed. 44 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)... 1051640 index entries processed. Index verification completed. 0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)... 936192 file SDs/SIDs processed. Cleaning up 24 unused index entries from index $SII of file 0x9. Cleaning up 24 unused index entries from index $SDH of file 0x9. Cleaning up 24 unused security descriptors. Security descriptor verification completed. 57725 data files processed. CHKDSK is verifying Usn Journal... 36994248 USN bytes processed. Usn Journal verification completed. CHKDSK is verifying file data (stage 4 of 5)... 936176 files processed. File data verification completed. CHKDSK is verifying free space (stage 5 of 5)... 306238 free clusters processed. Free space verification is complete. Adding 1 bad clusters to the Bad Clusters File. Correcting errors in the Volume Bitmap. Windows has made corrections to the file system. 488282111 KB total disk space. 485595420 KB in 766458 files. 401856 KB in 57726 indexes. 24 KB in bad sectors. 1059863 KB in use by the system. 65536 KB occupied by the log file. 1224948 KB available on disk. 4096 bytes in each allocation unit. 122070527 total allocation units on disk. 306237 allocation units available on disk. Internal Info: 00 49 0e 00 81 93 0c 00 34 01 17 00 00 00 00 00 .I......4....... 6b 29 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 k)..,........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ sfc /scannow log (through findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt") Note: The full log is at http://pastebin.com/raw.php?i=gTEGZmWj . I've only quoted parts of the full log below (mostly from the last part), as the full log won't fit within the character limit for questions. I've added it to serve as a preview. ... 2013-12-28 19:37:50, Info CSI00000542 [SR] Beginning Verify and Repair transaction 2013-12-28 19:37:55, Info CSI00000544 [SR] Verify complete 2013-12-28 19:37:56, Info CSI00000545 [SR] Verifying 95 (0x000000000000005f) components 2013-12-28 19:37:56, Info CSI00000546 [SR] Beginning Verify and Repair transaction 2013-12-28 19:38:03, Info CSI00000548 [SR] Verify complete 2013-12-28 19:38:03, Info CSI00000549 [SR] Repairing 43 (0x000000000000002b) components 2013-12-28 19:38:03, Info CSI0000054a [SR] Beginning Verify and Repair transaction ... 2013-12-28 19:38:15, Info CSI00000730 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:62{31}]"GroupPolicy-Admin-Gpedit-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000733 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:30{15}]"frs-core-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000736 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:26{13}]"gpmgmt-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000739 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:74{37}]"MediaServer-ASPAdmin-Migration-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI0000073c [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:36{18}]"Ldap-Client-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI0000073f [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:38{19}]"iSNS_Service-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000742 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:76{38}]"MediaServer-Multicast-Migration-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000745 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:78{39}]"Kerberos-Key-Distribution-Center-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000748 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:86{43}]"GroupPolicy-CSE-SoftwareInstallation-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI0000074b [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:28{14}]"ieframe-dl.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI0000074e [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:76{38}]"GroupPolicy-Admin-Gpedit-Snapin-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000751 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:32{16}]"IPSec-Svc-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000754 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:22{11}]"HTTP-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000757 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:56{28}]"MediaServer-Migration-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI0000075a [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:26{13}]"GPBase-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI0000075d [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:38{19}]"IasMigPlugin-DL.man"; source file in store is also corrupted 2013-12-28 19:38:15, Info CSI00000760 [SR] Could not reproject corrupted file [ml:520{260},l:84{42}]"\??\C:\Windows\System32\migwiz\dlmanifests"\[l:50{25}]"International-Core-DL.man"; source file in store is also corrupted 2013-12-28 19:38:16, Info CSI00000762 [SR] Cannot repair member file [l:24{12}]"wbemdisp.dll" of Microsoft-Windows-WMI-Scripting, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch 2013-12-28 19:38:16, Info CSI00000763 [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery" 2013-12-28 19:38:16, Info CSI00000766 [SR] Could not reproject corrupted file [ml:58{29},l:56{28}]"\??\C:\Windows\SysWOW64\wbem"\[l:24{12}]"wbemdisp.dll"; source file in store is also corrupted 2013-12-28 19:38:16, Info CSI00000768 [SR] Cannot repair member file [l:56{28}]"Microsoft.MediaCenter.UI.dll" of Microsoft.MediaCenter.UI, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_MSIL (8), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch 2013-12-28 19:38:16, Info CSI00000769 [SR] This component was referenced by [l:176{88}]"Microsoft-Windows-MediaCenter-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.MediaCenter" 2013-12-28 19:38:16, Info CSI0000076c [SR] Could not reproject corrupted file [ml:520{260},l:40{20}]"\??\C:\Windows\ehome"\[l:56{28}]"Microsoft.MediaCenter.UI.dll"; source file in store is also corrupted 2013-12-28 19:38:16, Info CSI0000076e [SR] Cannot repair member file [l:24{12}]"ReAgentc.exe" of Microsoft-Windows-WinRE-RecoveryTools, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch 2013-12-28 19:38:16, Info CSI0000076f [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery" 2013-12-28 19:38:16, Info CSI00000772 [SR] Could not reproject corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:24{12}]"ReAgentc.exe"; source file in store is also corrupted 2013-12-28 19:38:16, Info CSI00000774 [SR] Cannot repair member file [l:82{41}]"System.Management.Automation.dll-Help.xml" of Microsoft-Windows-PowerShell-PreLoc.Resources, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch 2013-12-28 19:38:16, Info CSI00000775 [SR] This component was referenced by [l:266{133}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~en-US~6.1.7601.17514.Microsoft-Windows-Client-Features-Language-Pack" 2013-12-28 19:38:16, Info CSI00000778 [SR] Could not reproject corrupted file [ml:520{260},l:104{52}]"\??\C:\Windows\System32\WindowsPowerShell\v1.0\en-US"\[l:82{41}]"System.Management.Automation.dll-Help.xml"; source file in store is also corrupted 2013-12-28 19:38:16, Info CSI0000077a [SR] Cannot repair member file [l:18{9}]"hlink.dll" of Microsoft-Windows-HLink, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch 2013-12-28 19:38:16, Info CSI0000077b [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery" 2013-12-28 19:38:16, Info CSI0000077e [SR] Could not reproject corrupted file [ml:48{24},l:46{23}]"\??\C:\Windows\SysWOW64"\[l:18{9}]"hlink.dll"; source file in store is also corrupted 2013-12-28 19:38:16, Info CSI00000780 [SR] Repair complete 2013-12-28 19:38:16, Info CSI00000781 [SR] Committing transaction 2013-12-28 19:38:19, Info CSI00000785 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction have been successfully repaired

  Read the article

• ssh port forwarding / security risk

  - by jcooper

  Hi there, I want to access a web application running on a web server behind my office firewall from an external machine. We have a bastion host running sshd that is accessible from the Internet. I want to know if this solution is a bad idea: Create an account on the bastion host with shell=/bin/false and no password ('testuser') Create a ssh RSA key on the external machine Add the public RSA key to the testuser's authorized_keys file ssh to the bastion host from the external host using: ssh -N 8888:targethost:80 run my tests from the external host shut down the ssh tunnel I understand that if my RSA private key were compromised then someone could ssh to the bastion host. But are there other reasons this solution is a bad idea? thank you!

  Read the article

• prevent filesystem from entering read-only mode

  - by user788171

  I have found that my server's filesystem is continuously entering read-only mode. There have been some issues with the raid1 array, but I have removed the bad disk from the array. However, it is still physically plugged into the system because I haven't had a chance to go over to the datacentre, I suspect udev and the system kernel is still picking up the bad disk and throwing errors. In /var/log/messages, there are errors like this: Mar 2 06:53:14 nocloud kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 2 06:53:14 nocloud kernel: ata1: irq_stat 0x00400040, connection status changed Mar 2 06:53:14 nocloud kernel: ata1: SError: { PHYRdyChg DevExch } Mar 2 06:53:14 nocloud kernel: ata1: hard resetting link Mar 2 06:53:20 nocloud kernel: ata1: link is slow to respond, please be patient (ready=0) Mar 2 06:53:21 nocloud kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 2 06:53:21 nocloud kernel: ata1.00: configured for UDMA/133 Mar 2 06:53:21 nocloud kernel: ata1: EH complete This happens fairly randomly throughout the day until eventually the filesystem becomes read-only. When this happens, my system becomes non-operational which kind of defeats the purpose of having a raid1. Note, ata1 is the bad disk (I think ata1 corresponds to /dev/sda because they are both first in line). Under mdadm, /dev/sda1,2 is no longer being used, but I can't prevent the system kernel from continuing to query that disk when I am no longer using it and throwing these errors. Is there a way to prevent my filesystem from automatically going into read-only mode? Furthermore, is it safe to do so? Thanks in advance. EDIT: Additional information: output from cat /proc/mdstat md1 : active raid1 sdb2[1] 976554876 blocks super 1.1 [2/1] [_U] bitmap: 5/8 pages [20KB], 65536KB chunk md0 : active raid1 sdb1[1] 204788 blocks super 1.0 [2/1] [_U] Output from mount: /dev/mapper/VolGroup-LogVol00 on / type ext4 (rw,noatime) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/md0 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) EDIT2: pvdisplay output: --- Physical volume --- PV Name /dev/md1 VG Name VolGroup PV Size 931.32 GiB / not usable 2.87 MiB Allocatable yes (but full) PE Size 16.00 MiB Total PE 59604 Free PE 0 Allocated PE 59604

  Read the article

• Where did this incorrect cached DNS lookup come from?

  - by Stephen Jennings

  Somehow, I've been having a chronic issue where my computer will get an invalid DNS lookup in its cache for either of the two Exchange servers I use from Mail.app. My workplace runs one of the Exchange servers and I run the other (they are totally unrelated, hosted by different companies, etc.). The problem manifests as a certificate domain error. When it happens, I can run nslookup mail.mydomain.com and I see the incorrect IP address (usually owned by either Apple or Akamai), but if I run nslookup mail.mydomain.com 8.8.8.8, I get the correct address. My real quest is to find out why this keeps happening, and to do that, I'd like to know which server is supplying me this bad DNS entry. Is there a way to check my DNS cache to see where this bad lookup came from?

  Read the article

• Make user home directory at gdm login

  - by Lorenzo

  I'm trying to make home directory at (RADIUS) user gdm login. The auth is working right, but when I try gdm says that the user hasn't a home directory. I tried to do that with pam_mkhomedir.so but is not working. My /etc/pam.d/gdm file: PAM-1.0 auth sufficient pam_radius_auth.so auth sufficient pam_nologin.so auth sufficient pam_env.so readenv=1 auth sufficient pam_env.so readenv=1 envfile=/etc/default/locale auth sufficient pam_succeed_if.so @include common-auth auth optional pam_gnome_keyring.so account sufficient pam_radius_auth.so @include common-account session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close session optional pam_limits.so @include common-session session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open session optional pam_gnome_keyring.so auto_start session required pam_mkhomedir.so skel=/etc/skel umask=0022 @include common-password Thanks

  Read the article

• DB2 LUW tools for diagnosing issues when the stuff hits the fan

  - by Ichorus

  I am no DBA and very much a novice when it comes to DB2 so even 'obvious' answers are welcome to this question: I love db2top but sometimes I cannot get it to run if the load average is high on a db2 LUW. This morning I was looking at an issue where load average shot up suddenly, I could not get db2top to come up and I needed to find out what was happening. What can I do to find out who is doing what in this situation? I suspected a horribly bad query was being run by someone...is there a good way to find information on poor performing SQL on the fly in that type of situation? Are there any good ways to collect good, actionable stats who/where bad sql is coming from in the event that load average is so high? I know about db2pd but I am not sure how to use it effectively and slogging through tens of thousands of lines of raw data is probably not the most efficient way to get at the heart of a problem. Any tips or resources?

  Read the article

• Sysadmin 101: How can I figure out why my server crashes and monitor performance?

  - by bflora

  I have a Drupal-powered site that seems to have neverending performance problems. It was butt-slow about 5 months ago. I brought in some guys who installed nginx for anonymous visitors, ajaxified a few queries so they wouldn't fire during page load, and helped me find a few bottlenecks in the code. For about a month, the site was significantly faster, though not "fast" by any stretch of the word. Meanwhile, I'm now shelling out $400/month to Slicehost to host a site that gets less than 5,000/uniques a day. Yes, you read that right. Go Drupal. Recently the site started crashing again and is slow again. I can't afford to hire people to come in, study my code from top to bottom, and make changes that may or may not help anymore. And I can't afford to throw more hardware at the problem. So I need to figure out what the problem is myself. Questions: When apache crashes, is it possible to find out what caused it to crash? There has to be a way, right? If so, how can I do this? Is there software I can use that will tell me which process caused my server to die? (e.g. "Apache crashed because someone visited page X." or "Apache crashed because you were importing too many RSS items from feed X.") There's got to be a way to learn this, right? What's a good, noob-friendly way to monitor my current apache performance? My developer friends tell me to "just use Top, dude," but Top shows me a bunch of numbers without any context. I have no clue what qualifies as a bad number or a good number in Top, or which processes are relevant and which aren't. Are there any noob-friendly server monitoring tools out there? Ideally, I could have a page that would give me a color-coded indicator about how apache is performing and then show me a list of processes or pages that are sucking right now. This way, I could know when performance is bad and then what's causing it to be so bad. Why does PHP memory matter? My apparently has a 30MB memory foot print. Will it run faster if I bring that number down? Thanks for any advice. I spent a year or so trying to boost my advertising income so I could hire a contractor to solve my performance woes. I didn't want to have to learn all this sysadmin voodoo. I'm now resigned to the fact that might not have a choice.

  Read the article

• hdd fail, allows format, allows copy

  - by Bogdan

  Hello I have a problem with a Fujitsu laptop. Some kid played with it and now the hdd is a wreck. I can't install Windows XP, Windows 7 or Linux. I checked with hiren's boot for bad sector did a chdisk on it says I don't have any bad sectors, on smart says is active but status error. I tried format and it worked, I tried copying files using a live CD and it worked, but when I try to install the OS it says it can't format, or it can't copy files.

  Read the article

• Fixing mac user file permissions, not the system

  - by Cawas

  Usually those files get wrong permission when coming from the network, even when I copy them from it, but mostly through "file sharing". So, definitely not talking about Disk Utility repair here, please. But regardless of how the file got wrong permission, I know of two bad ways to fix them. One is CMD+I and the other is chown / chmod. The command line isn't all bad but isn't practical either. Some times it's just 1 file I need to repair, sometimes it's a bunch of them. By "repair" I mean 644 for files, 755 for folders, and current user:group for all of them. Isn't there any app / script / automator out there to do that?

  Read the article

• How to rebuild a Li Ion laptop battery?

  - by spoulson

  I have an aging Gateway NX560XL laptop. The battery is toast and a new one, even aftermarket, starts at $130. So, to experiment, I began tearing apart the old battery to see what can be done. I found it used 8 standard size 18650 Li Ion cells arranged two cells parallel then in series (like: ====). Some online shopping revealed ~$7-13/ea replacements depending on mAh output. My plan is to load test to determine the bad cells and replace only those, as I read that typically only 1 or 2 may be bad. I'm proficient with soldering, however these cells are attached with welded tabs. Some of them broke during disassembly and I'm not sure how to reattach them. What I found online are cells like these that have solder tabs pre-welded to the ends so I can solder wires onto. Is there any guide available that provides the instructions and parts to do this kind of rebuild?

  Read the article

• xauth error with ssh X Forwarding

  - by bdk

  From my (Debain) Desktop machine, I am trying to ssh into a Debian Server with ssh -X remote-ip After logging into the remote host, I get: /usr/bin/X11/xauth: creating new authority file /root/.Xauthority /usr/bin/X11/xauth: (stdin):1: bad display name "unix:10.0" in "remove" command /usr/bin/X11/xauth: (stdin):2: bad display name "unix:10.0" in "add" command And the X Forwarding doesn't work. From my Desktop I can ssh -X into other Debian servers and it works fine. I found a lot of threads discussing similar issues on google, but they all seem to fade out without a solution, and the simple things suggested there like exporting DISPLAY or setting xhost + don't seem to make a difference.

  Read the article

• How do I rename the Tfs_xxxConfiguration database for TFS 2010?

  - by Jaxidian

  When we installed TFS 2010, we made some poor decisions in naming our databases. I have figured out how to rename everything except for the Tfs_xxxConfiguration database. How can I get this renamed? I can only find a read-only display of the connection string to it - cannot find where to alter that connection string either directly or indirectly. I'd really prefer to not have to rebuild it from scratch... again... Thanks!

  Read the article

• Google Chrome never renders fonts properly / no smoothing etc

  - by Christian Ivicevic

  A while ago I started using Chrome and no longer Firefox, however I found out something weird which maybe force me to return to Firefox if I can not fix this. I am coding a homepage and the output was in Chrome ugly, in Firefox not. I thought "ok this is maybe due to bad code"... however I found out that the same problems occurs on different sites like Facebook too. The font is not smoothed and it is not nice to read. Here is an example, although I have censored nearly everything... Bad Chrome Rendering Good Firefox Rendering You may need to open up in a new tab to see the errors in detail. Now I want to know, whether this is just Chrome trolling me or maybe something else. EDIT I tried it out under Ubuntu on my PC and it works well... seems to be an error on Windows/Chrome on Windows.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >