Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 64/194 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Apply LADSPA filter to only one channel of multichannel output with Alsa and PulseAudio

  - by justinzane

  I want to apply a filter, specifically SWH's glame-bandpass-iir, to only one of several output channels. I want unfiltered output to go to the front, rear and LFE channels with bandpass filtered output for the center channel. I'm assuming that this needs to be done with Alsa's /etc/asound.conf but I cannot understand the documentation well enough to figure out how. If there is a better way, via PulseAudio, Jack or whatever, I'm open to whatever works. Thanks.

  Read the article

• Ubuntu doesn't let me to blacklist modules

  - by László Monda

  I'd like to blacklist a couple of modules, namely drm, drm_kms_helper, i2c_algo_bit and i915 to not allow my integrated Intel GPU to ever be used, but instead my Nvidia MXM card. I inserted the following lines into /etc/modprobe.d/blacklist.conf: blacklist i915 blacklist drm blacklist drm_kms_helper blacklist i2c_algo_bit Despite the above right after rebooting my laptop and typing lsmod I can see these modules loaded. Why does my blacklist get utterly disrespected and what can I do about it?

  Read the article

• How to use XDMCP+GDM and Xnest?

  - by João Pinto

  I have been trying to enable XDMCP on GDM without much success. Following some instructions I have edited /etc/gdm/custom.conf and added: [daemon] RemoteGreeter=/usr/lib/gdm/gdm-xdmcp-chooser-slave [xdmcp] Enable=true Then restarted gdm and tried to connect both locally and from a remote system with: Xnest :1 -query localhost Xnest :1 -query remote_system_hostname I just get a black screen instead of the GDM window as expected. I am missing something ?

  Read the article

• VIM does not detect syntax of .ssh/config

  - by Erik

  On a plain Ubuntu installation (12.04 in my case) when I have no ~/.vimrc VIM does not detect syntax of .ssh/config. Syntax highlighting works, but it does not set the correct filetype. vi ~/.ssh/config :set syn? >syntax=conf When I do: set syn=sshconfig Then the syntax highlighting is as it should be. Why isn't the filetype automatically identified? And how can it be set automatically?

  Read the article

• only cairo-dock work on my custom livecd

  - by Igi Shellshock

  i've made custom ubuntu with ubuntu builder, i've installed gnome-shell and cairo-dock from chroot.i've removed unity from chroot too. i've edited /etc/lightdm/lightdm.conf, change user-session = cairo-dock then i build, run on virtual box, livecd successful show the cairo dock but when i change to user-session = gnome-shell, dekstop show unity panel, i changed to gnome only, same show unity.why just cairo dock that work and gnome-shell not ? thank advance i'm sorry, my english is bad

  Read the article

• User upstart session in different window manager wIndow manager

  - by Joelmob

  I am using Ubuntu 14.04 and i3 as window manager. After I have logged in to i3, upstart won't find my user jobs under ~/.config/upstart/. How can I make upstart find these config files without having to execute something like gnome-session? Thanks. edit, one of the jobs starts redshift, here is the config ~/.config/upstar/redshift.conf: respawn exec redshift -l 59:18 When i try to start this job with initctl start redshift: initctl: Unknown job: redshift

  Read the article

• Modules loading despite being added to the blacklist

  - by László Monda

  I'd like to blacklist a couple of modules, namely drm, drm_kms_helper, i2c_algo_bit and i915 to forbid my integrated Intel GPU to be used, but to use my Nvidia MXM card instead. I inserted the following lines into /etc/modprobe.d/blacklist.conf: blacklist i915 blacklist drm blacklist drm_kms_helper blacklist i2c_algo_bit Despite the above right after rebooting my laptop and typing lsmod I can see these modules loaded. Why does my blacklist get utterly disrespected and what can I do about it?

  Read the article

• I can't save my settings in Ubuntu One client in windows7

  - by user209470

  I have Ubuntu 12.04 at home and windows7 at work. I sync Documents between them with Ubuntu One. In W7 I can't set/save the settings. In syncdaemon-exceptions.log there is error: File "ubuntuone\syncdaemon\config.pyc", line 317, in save exceptions.IOError: [Errno 2] No such file or directory: 'C:\\Users\\F\xc3\xb6ldi Ferenc\\AppData\\Local\\ubuntuone\\syncdaemon.conf.new' The directory is exist. The file is not. The W7 language is Hungarian.

  Read the article

• Unable to sync time using `ntpdate`, error: "no server suitable for synchronization found"

  - by William Ting

  My ntp.conf file: user@pc[0][07:37:40]:/etc$ cat /etc/ntp.conf idriftfile /var/lib/ntp/ntp.drift server 0.pool.ntp.org server 1.pool.ntp.org server 2.pool.ntp.org server pool.ntp.org Command output: user@pc[0][07:37:24]:/etc$ sudo ntpdate -dv pool.ntp.org 18 Jun 07:37:35 ntpdate[10737]: ntpdate [email protected] Tue Apr 19 07:15:05 UTC 2011 (1) Looking for host pool.ntp.org and service ntp host found : conquest.kjsl.com transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) transmit(198.137.202.16) transmit(216.45.57.38) transmit(64.6.144.6) 198.137.202.16: Server dropped: no data 216.45.57.38: Server dropped: no data 64.6.144.6: Server dropped: no data server 198.137.202.16, port 123 stratum 0, precision 0, leap 00, trust 000 refid [198.137.202.16], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.1f16c1e3 Sat, Jun 18 2011 7:37:39.121 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 216.45.57.38, port 123 stratum 0, precision 0, leap 00, trust 000 refid [216.45.57.38], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.524a05dd Sat, Jun 18 2011 7:37:39.321 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 64.6.144.6, port 123 stratum 0, precision 0, leap 00, trust 000 refid [64.6.144.6], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.524a05dd Sat, Jun 18 2011 7:37:39.321 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 server 64.6.144.6, port 123 stratum 0, precision 0, leap 00, trust 000 refid [64.6.144.6], delay 0.00000, dispersion 64.00000 transmitted 4, in filter 4 reference time: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 originate timestamp: 00000000.00000000 Thu, Feb 7 2036 0:28:16.000 transmit timestamp: d1a71a93.857c6fbd Sat, Jun 18 2011 7:37:39.521 filter delay: 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 0.00000 filter offset: 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 delay 0.00000, dispersion 64.00000 offset 0.000000 18 Jun 07:37:40 ntpdate[10737]: no server suitable for synchronization found

  Read the article

• Ubuntu boots to terminal on start up

  - by Jules

  For a long time I've been unable to get updates due to a "repositories not found" error. Yesterday someone fixed this for me but after installing 94 days worth of updates my system wanted to restart. It looks like it is booting normally but then it opens a terminal and asks for my login and password. I had tried Ctrl+ Alt +F7 and startx to no avail. Here is everything that appears on screen when I turn the computer on. Ubuntu 10.04.4 LTS box-o-doom tty1 box-o-doom login:julian password: last login: Sun Jul 8 10:28:02 BST tty1 Linux box-o-doom 2.6.32-41-generic-pae #91-Ubuntu SMP Wed Jun 13 12:00:09 UTC 20 12 i686 GNU/Linux Ubuntu 10.04.4 LTS Welcome to Ubuntu! *Documentation: http://help.ubuntu.com julian@box-o-doom:~$_ i then tried dmesg which produced hundreds of lines all very similar to the first line reproduced here [ 9.453119] type=1505 audit1341742405.022:10): operation="profile_replace" pid=743 name="/usr/lib/connman/scripts/dhclient-script" follwed by this at the end [ 9.475880] alloc irq_desc for 27 on node-1 [ 9.475883] alloc kstat_irqs on node-1 [ 9.475890]forcedeth 0000:00:07.0: irq27 for MSI/MSI-X [ 9.760031] hda_code:ALC662 rev1: BIOS auto-probing. [ 10.048095] input:HDA Digital PCBeep as /devices/pci 0000:00:05.o/inp ut/input6 [ 10.862278] ppdev: user-space parallel port driver [ 20.268018] eth0: no IPv6 routers present julian@box-o-doom:~$_ results of startx lots of text scrolls off the screen and i have no way of reading it. but everything i can see is reproduced below current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version Markers: (--) probed, (**) from config file, (==) defult setting, (++) from command line, (!!) notice, (II) informational. (WW) Warning, (EE) error, (NI) not implemented, (??) unknown. (==) log file: "/var/log/Xorg.0.log", Time: SUn Jul 8 12:02:23 2012 (==) using config file: "/etc/X11/xorg.conf" (==)using config directory: "/usr/lib/X11/xorg.conf.d" FATAL: Module nvidia not found. (EE) NVIDIA: Failed to load the NVIDIA kernal module please check your (EE) NVIDIA: systems kernal log for aditional error messages. (EE) Failed to load module "nvidia" (module specific error, 0) (EE) No drivers available. Fatal server error: no screens found please consult the X.org foundation support at http://wiki.x.org for help please also check the log files at "/var/log/X.org.0.log" for aditional informati on ddxSigGiveUp: Closing log giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No suck process (errno 3): server error julian@box-o-doom:~$_

  Read the article

• execute script with sudo after login

  - by Kalamalka Kid

  i need to execute the following commands AFTER login. sudo hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 sudo hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 (trying to edit rc.local does not work nor does using hdparm.conf because as soon as I log in the disks start up again). I have tried numerous things like bash files and autossh entries in the startup applications with no luck because sudo is involved.

  Read the article

• Domain masking (and simple page links)

  - by Halik

  How do you set up the domain (Im using godaddy) to mask the server url but to append the sub-page link. Im thinking something like the wikipedia en.wikipedia.org/wiki/something (or, if it would require httpd.conf access, setting it to append the default subpage link eg. '?page_id=2') Currently I can set up the domain to either be masked completely without showing any sub-page links or to simply redirect my domain to my web server.

  Read the article

• Recipient address rejected: User unknown in local recipient table;

  - by Thufir

  I've gone through the guide for mailman with some difficulty, but seem to be nearly there. I'm able to navigate to the mailman web GUI, create lists and subscribe. I just subscribe my local FQDN, so [email protected] for testing purposes. This FQDN only works on localhost. However, e-mails to the list address, in this case [email protected], are rejected: root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 08:28:43 dur postfix/master[12208]: terminating on signal 15 Aug 28 08:28:44 dur postfix/postfix-script[12322]: starting the Postfix mail system Aug 28 08:28:44 dur postfix/master[12323]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:28:46 dur postfix/postfix-script[12332]: stopping the Postfix mail system Aug 28 08:28:46 dur postfix/master[12323]: terminating on signal 15 Aug 28 08:28:47 dur postfix/postfix-script[12437]: starting the Postfix mail system Aug 28 08:28:47 dur postfix/master[12438]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:29:29 dur postfix/smtpd[12460]: connect from localhost[127.0.0.1] Aug 28 08:29:30 dur postfix/smtpd[12460]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur.bounceme.net> Aug 28 08:29:33 dur postfix/smtpd[12460]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# ll /var/lib/mailman/data/ total 56 drwxrwsr-x 2 root list 4096 Aug 28 08:28 ./ drwxrwsr-x 8 root list 4096 Aug 27 19:58 ../ -rw-r--r-- 1 root list 0 Aug 28 04:36 aliases -rw-r--r-- 1 root list 12288 Aug 28 04:36 aliases.db -rw-r--r-- 1 root list 12288 Aug 28 08:28 aliases.db.db -rw-r----- 1 root list 41 Aug 27 21:04 creator.pw -rw-rw-r-- 1 root list 10 Aug 27 19:58 last_mailman_version -rw-r--r-- 1 root list 14100 Oct 19 2011 sitelist.cfg root@dur:~# root@dur:~# grep alias /etc/postfix/main.cf alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/var/lib/mailman/data/aliases.db #alias_database = hash:/etc/aliases root@dur:~# root@dur:~# postconf -n alias_database = hash:/var/lib/mailman/data/aliases.db alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = $myhostname localhost.$mydomain localhost $mydomain myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.example.com relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# Why is this e-mail rejected? It seems to, maybe be related to the alias_maps and alias_database settings in postfix.

  Read the article

• "Shared Folders" Feature Is Not Working In VirtualBox

  - by Islam Hassan

  I have Ubuntu 11.10 as a host and another linux 2.6 distribution as a guest. When I try to setup guest additions, this error message appears Building the shared folder support module .. fail And because of that, when I run the following in terminal mount -t vboxsf shared /root/shared I get the following error message mount: unknown filesystem type 'vboxsf' Any syggestions please? EDIT Sorry, the mentioned error message isn't complete, this is it. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) This is the content of vboxadd-install.log Uninstalling modules from DKMS Attempting to install using DKMS Creating symlink /var/lib/dkms/vboxguest/4.1.2/source -> /usr/src/vboxguest-4.1.2 DKMS: add Completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... make KERNELRELEASE=3.2.6 -C /lib/modules/3.2.6/build M=/var/lib/dkms/vboxguest/4.1.2/build..........................(bad exit status: 2) Error! Bad return status for module build on kernel: 3.2.6 (i686) Consult the make.log in the build directory /var/lib/dkms/vboxguest/4.1.2/build/ for more information. 0 0 ERROR: binary package for vboxguest: 4.1.2 not found Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 -C /lib/modules/3.2.6/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo; \ echo " ERROR: Kernel configuration is invalid."; \ echo " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* WARNING: Symbol version dump /usr/src/linux-source-3.2.6/Module.symvers is missing; modules will have no dependencies and modversions. Actually the log file is very large and it exceeds the 30000 characters limit. How can I upload the entire log file here?

  Read the article

• How to configure TATA Photon+ EC1261 HUAWEI

  - by user3215

  I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help. Also, it is very slow, but I was told that I would see speeds up to 3.1MB. I dont have wvdial installed and cannot install it from apt as I'm not connected to internet Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices). output of wvdialconf /etc/wvdial.cof: #wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" output of wvdial: #wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CRM=1 AT+CRM=1 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Oct 16 15:30:47 2010 --> Pid of pppd: 5681 --> Using interface ppp0 --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> local IP address 14.96.147.104 --> pppd: (u;[08]@s;[08]`{;[08] --> remote IP address 172.29.161.223 --> pppd: (u;[08]@s;[08]`{;[08] --> primary DNS address 121.40.152.90 --> pppd: (u;[08]@s;[08]`{;[08] --> secondary DNS address 121.40.152.100 --> pppd: (u;[08]@s;[08]`{;[08] Output of log message /var/log/messages: Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180 Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15 Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes. Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes. Oct 16 15:29:58 desktop pppd[5119]: Connection terminated. Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0 Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0 Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2 Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:48 desktop pppd[5681]: local IP address 14.96.147.104 Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223 Oct 16 15:30:48 desktop pppd[5681]: primary DNS address 121.40.152.90 Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100 EDIT 1 : I tried the following sudo stop network-manager sudo killall modem-manager sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 & sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 & Output of mm.log: #vim ~/mm.log: ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Option ** Message: Loaded plugin Huawei ** Message: Loaded plugin Longcheer ** Message: Loaded plugin AnyData ** Message: Loaded plugin ZTE ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Sierra ** Message: Loaded plugin Generic ** Message: Loaded plugin Gobi ** Message: Loaded plugin Novatel ** Message: Loaded plugin Nokia ** Message: Loaded plugin MotoC Output of nm.log: #vim ~/nm.log: NetworkManager: <info> starting... NetworkManager: <info> modem-manager is now available NetworkManager: SCPlugin-Ifupdown: init! NetworkManager: SCPlugin-Ifupdown: update_system_hostname NetworkManager: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet NetworkManager: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e NetworkManager: SCPlugin-Ifupdown: addresses count: 1 NetworkManager: SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses NetworkManager: SCPluginIfupdown: management mode: unmanaged NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1) NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found. NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) @

  Read the article

• Access forbidden 403 error in xampp

  - by Ramvignesh

  I am very new to xampp. I have made a fresh xampp install with the following commands. sudo su cd /tmp wget bit.ly/1cmyrUo -O xampp-32bit.run chmod 777 ./xampp-32bit.run sudo ./xampp-32bit.run Then I made a perl file to check whether my xampp works. The following is my sample.pl file content. #!usr/bin/perl print "content-type:text/html\n"; print(header()); use CGI qw(:standard); print(start_html()); print "Hello. I am ram"; print(end_html()); After copying my perl file from /home/vicky/desktop to /opt/lampp/cgi-bin. I started my xampp with the following command. /opt/lampp/lampp start Then I ran my sample.pl in the localhost with the help of the http://localhost/cgi-bin/sample.pl in my mozilla browser. I just got the following window. I found only answers relating to the 'new security concept error' and 'accessing virtual host issue'. I did came across an askubuntu query, a bid similar to that of mine. It had no answers but some comments. One comment suggested to change the file permissions. It directed to get help from here. It said to change the directory permission as 755 and file permission as 644 to resolve this kind of issue. When I tried to do that, I came to know that my cgi-bin directory already had 755 permission and my sample.pl had 644 permission. I have no solutions now. PostScript: I have attached the content of my /opt/lampp/apache2/conf/httpd.conf file. Hope this will help the answer-providers to understand my problem completely. Alias /bitnami/ "/opt/lampp/apache2/htdocs/" Alias /bitnami "/opt/lampp/apache2/htdocs" <Directory "/opt/lampp/apache2/htdocs"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory>

  Read the article

• Configuring Touchpad Multi-Tap on Ubuntu 11.10

  - by nunos

  I am having a hard time configuring my notebook's touchpad. I can do everything I can in Windows with the exception of three-finger tap, which doesn't work, and the action of two-finger tap which is giving me the equivalent to a right-mouse click, when I wanted a middle-mouse click. I read on a forum to use this as a guide. The problem is that I can't even find the configuration file /etc/X11/xorg.conf.d/10-synaptics.conf. I tried running pacman -S xf86-input-synaptics but I don't have the pacman program installed. When I try to install it by sudo apt-get install I get a pacman game instead! I know the guide is for archlinux, so maybe that's why it doesn't work with me. I am running Ubuntu 11.10 on an Asus N82JV. Any help on this is appreciated. Here's the output of xinput list: nuno@mozart:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=12 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=13 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=16 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? USB2.0 2.0M UVC WebCam id=10 [slave keyboard (3)] ? Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave keyboard (3)] ? Asus Laptop extra buttons id=14 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=15 [slave keyboard (3)]

  Read the article

• Display Driver Issue on an hp TX2-1160ea Notebook

  - by Sam

  I'm new to Linux and recently switched to Ubuntu 11.04 due to my project requirement. My laptop has been freezing and going to black screen of death when I run anything related to display (Share desktop, stream video, etc). Today I went through the Ubuntu forum to install the appropriate graphic driver and, after doing it, I rebooted my PC. It gave an error before login saying "select the recovery mode" and after clicking OK, it didn't give the same error on reboot but I've lost the 11.04 graphical interface and all I see is the interface of Ubuntu v10 with slow visuals (even scrolling up/down on browser is really slow). For the reference, here's a desktop screenshot so that you can understand the situation. Also the laptop is overheating. How can I fix this problem? How can i get the Ubuntu 11.04 view back? I also tried Google, but couldn't find any issue like this. Some general Information: Laptop: HP TouchSmart TX2-1160ea Processor: AMD Turion TX2 Memory: 4GB OS: Ubuntu 11.04 Some debugging information:: $ report-hw | grep controller lspci -knn: 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] lspci -knn: 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] lspci -knn: 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) lspci -knn: 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) And: $ dpkg -l '*fglrx*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii fglrx 2:8.840-0ubunt Video driver for the ATI graphics accelerato ii fglrx-amdcccle 2:8.840-0ubunt Catalyst Control Center for the ATI graphics un fglrx-control <none> (no description available) un fglrx-control- <none> (no description available) ii fglrx-dev 2:8.840-0ubunt Video driver for the ATI graphics accelerato un fglrx-driver <none> (no description available) un fglrx-driver-d <none> (no description available) un fglrx-kernel-s <none> (no description available) un fglrx-modalias <none> (no description available) un xfree86-driver <none> (no description available) un xfree86-driver <none> (no description available) un xorg-driver-fg <none> (no description available) un xorg-driver-fg <none> (no description available) If you need any more information that could help, just ask.

  Read the article

• How to fix splash screen in Ubuntu 13.10!

  - by Nolt

  This is soultion how to fix no splash screen in Ubuntu after nvidia proprietary driver installation. Open your terminal and type sudo apt-get install v86d Then sudo gedit /etc/default/grub Find this line #GRUB_GFXMODE=640x480 and chagne for this one (of course choose your resolution) GRUB_GFXMODE=1440x900x24 GRUB_GFXPAYLOAD_LINUX=keep Save file and type in terminal echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash sudo update-initramfs -u sudo update-grub2 It's worked for me in all Ubuntu versions. Give it a try :)

  Read the article

• How can I tell if I am out of inotify watches?

  - by Jorge Castro

  I use an application that consumes inotify watches. I've already set fs.inotify.max_user_watches=32768 in /etc/sysctl.conf but last night the application stopped indexing unless I ran it manually, which leads me to suspect I am out of watches. Since I don't know what the trade off is when I increase this number (does it consume more RAM?), I don't know if I should just increase this number, so I'd like to know if there's a way I can tell if it's using all these watches and what the tradeoffs might be for increasing it.

  Read the article

• Wvdial randomly drops 3G connection - How to auto-reconnect?

  - by askvictor

  I'm using a 3G modem for a router running Ubuntu server 10.04. I have the connection established using wvdial, which works successfully, but sometimes the connection drops. I would like it to auto re-connect. I've set the "auto reconnect" in wvdial.conf, but this does not seem to work. Any ideas? Am I missing a config option, or should I try writing a script which polls the network status and resets if ppp0 has gone down?

  Read the article

• Using Upstart after building Apache & Mysql from source

  - by Tek

  I'm using Ubuntu 10.10, Apache 2.2.17 and Mysql 5.5.10. I need some assistance getting Apache and Mysql running on boot. Reading the getting started over at upstart website attempting to get it to work. I added /etc/init/apache2.conf along with the following line: exec /usr/local/apache2/bin/apachectl I'm probably doing everything wrong, could someone point me in the right direction? Thanks. :)

  Read the article

• 12.04 boots fine, with graphical splash screen, but then Monitor "out of range"

  - by Jim Bednar

  I see dozens of posts from people whose monitors are saying "out of range" under Ubuntu; seems like there are some serious problems in Ubuntu with autodetection of monitor capabilities. :-( But none of the many, many suggestions I found have solved my problem, and right now I can't use anything graphical on this machine! History: I installed Ubuntu 12.04 on my HP Proliant Microserver N40L, which worked reasonably at the default resolution across several reboots. At some point I noticed that the proprietary video driver was not in use, and tried to install one to get better window-drawing speeds, but it failed with some sort of error, and I gave up on that. A few weeks later when I next rebooted, it showed the usual BIOS screen and various boot loading screens (including GRUB), and then the usual purple Ubuntu splash screen with the dots showing that things were loading, but when it finished booting the monitor went black and eventually showed "Out of range" (with no other information). Given that there were several weeks between reboots (it's a server, after all), I've no idea if it was some system update, trying to install the proprietary drivers, or something else that caused the problem. Anyway, the system has booted fine, as I can do Ctrl-Alt-F1 to get a text prompt and can log in there. But Ctrl-Alt-F7 goes back to the out of range error. Some posters said to try Ctrl-Alt-- (minus) to cycle through resolutions until one works, but that didn't have any visible effect. Many, many others said it was a grub problem, which seems unlikely given that grub's screen looks fine, but I tried editing /etc/default/grub to set a particular resolution (trying many of them) and running update-grub, with no apparent effect. Rebooting into failsafe mode works the same as regular mode. Replacing xorg.conf with xorg.conf.failsafe works the same too. I'm at my wits' end! Isn't there anything I can do to convince Ubuntu to choose a mode that the monitor supports? E.g. the one that it is using for the splash screen? I don't need great resolution on this machine, just anything that works!!!!! Help!!!!!! Please!!!!

  Read the article

• Unable to install Hadoop in Ubuntu 12.04

  - by Anitha

  I am trying to install hadoop in ubuntu 12.04 version. Following the instructions from michael-noll.com/tutorials/running-hadoop-on-ubuntu-linux-single-node-cluster/. Installed java-6-openjdk from ubuntu software center. I have set java_home in .bashrc.Also set java_home in hadoop conf/ env.sh. While formatting the namenode, getting error: usr/lib/jvm/java-6-openjdk/bin/java no such file or directory.

  Read the article

• WiFi connected to router, but no internet connection

  - by Quetzacotl

  I just got a new notebook, a ThinkPad Edge E530, and installed Ubuntu on it. I'm pretty new to Ubuntu. On the same laptop, running Windows 7, the Wi-Fi connection works fine. Ethernet connection works both on Win7 and on Ubuntu. Only Wi-Fi on Ubuntu does not work; it connects to the Wi-Fi access point but I don't have Internet access. My wireless card is Intel Centrino Wireless-N 2230. What can fix the problem? EDIT: ifconfig -a eth0 Link encap:Ethernet HWaddr b8:88:e3:30:72:34 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:163 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10124 (10.1 KB) TX bytes:10124 (10.1 KB) usb0 Link encap:Ethernet HWaddr 02:15:e0:ec:01:00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 68:5d:43:43:71:e1 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe43:71e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2801 (2.8 KB) TX bytes:26230 (26.2 KB) route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"SATELITE" Mode:Managed Frequency:2.462 GHz Access Point: 00:1F:1F:8D:CC:08 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=60/70 Signal level=-50 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:93 Invalid misc:243 Missed beacon:0 eth0 no wireless extensions.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >