Search Results

Search found 8706 results on 349 pages for 'dual monitor'.

Page 64/349 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • How is the 137GB limit counted in Virtual PC (two systems on one disk)?

    - by Nux
    I have a dual boot (Win7, XP) physical machine on my old computer which I want to virtualize and move to my new one. So I've uninstalled everything that I can and run shrink from RescueCD (used GParted). Now I have two about 80GiB partitions with a gap between them, so still this seem to be above the given limit. Still the resulting VHD (made with Disk2vhd) is much below the limit (about 110GiB) and both partitions are below the limit. So my question is - is it failing due to the limitations of disk size for VPC or is failing simply because it's a dual boot system. Or maybe it would work if I would move partitions to be close to each other (the gap between them is about 171GB and the whole physical disk is 1TB)?

    Read the article

  • **Simplest** way to dual boot Linux on a Vista laptop

    - by user20285
    I have a 64bit Vista laptop with no cd drive (and no intention of buying one). What is the simplest way (if any) for me to dual boot Linux (I don't care what version as long as it's not too old...and will run Ruby 1.8.7 or greater)? I'd prefer anything with an installer. I've been programming on Windows for a little over 1.5 years and would like the option of using Linux. I'm not a moron, but the I'm legitimately scared of messing up my computer. I speak the language of Rails, not of OS tweaks. Thanks!

    Read the article

  • Access a windows dynamic hard drive through a virtual machine on ubuntu?

    - by Enigma
    I have a Windows 7 OS and am thinking about transitioning to a dual boot set up with Ubuntu 12.04. From what I recall, it is not possible to natively access Dynamic Windows Partitions in a Linux OS. My thought is that it might be possible to have a virtual machine (running windows) installed within Ubuntu access the physical dynamic drive. The problem comes to whether VMWare can access the physical disk "high enough" to be able to mount it within the windows virtual machine as a native device or if it gets passed through from the native Linux OS. This is really the only thing holding me back from switching to a dual-boot set up as the dynamic disk is made up of 4 or 5 hard drives and I would very much like access to the data on both OS's. Alternatively, is there another solution for combining multiple physical hard drives into one virtual hard drive that would be readable on both OS's?

    Read the article

  • Dual boot windows 8 pro and windows 7 on XPS 8500 Special additon

    - by Jesse
    I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying where do you want to install windows at? pops up but none of my drives are listed. Please help me determine what is going on? I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK."

    Read the article

  • Ram not working in dual dynamic paging mode

    - by Robin Agrahari
    My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

    Read the article

  • Missing files when Windows 7 returns from hibernate w/ dual boot

    - by Arthur N
    I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

    Read the article

  • Missing files when Windows 7 returns from hibernate w/ dual boot

    - by Arthur N
    I have a dual-boot setup with Ubuntu (lucid) and Windows 7. I have the Windows file system shared on Ubuntu through Samba. Occasionally, I am working on Windows and my machine will go into hibernate (i.e. when the battery level is critical). By default, my GRUB settings boot me into Ubuntu. So when I get back to my PC, sometimes I just hop into Ubuntu instead of going back to Windows. However, if I write any files to the Windows file system during that Ubuntu session, the next time I do go back to Windows (which resumes from hibernate), those files are missing. Obviously, the state of the actual file system and the hibernate snapshot become out of sync, and Windows chooses the hibernate snapshot, overriding any changes I may have made thru Ubuntu. For now, I've disabled the hibernate option in the Windows power settings, but is there any utility I can use to get back some of those missing files?

    Read the article

  • not able to open files in windows partition from linux on a dual boot system

    - by user1237244
    I have installed dual boot on my laptop, windows XP && Fedora linux. For some unknown reason windows XP is not booting up. Through fedora I'm able to see the windows XP partition and files in it. But the problem here is, I'm not able to open those files from linux. Does anybody hit this kind of issue, if so and incase you figured out the soluton, can you please share the solution? Thanks in advance.

    Read the article

  • Turning a (dual boot) Ubuntu 9 into a virtual machine

    - by xain
    I have a dual boot box (Ubuntu 9 and Vista) and I'm about to upgrade Vista to Win 7. Being Ubuntu my main development environment, I'd like to use it as it is from the new environment via VirtualBox or VMWare. I know tools like clonezilla that backup entire drives; in my case, the linux partitions are distributed between several disks which in turn contain both linux and windows data. My intention is to use some backup tool (like Clonezilla if it fits) that allows me to ONLY backup the linux partitions distributed in several disks. Any hints ? Thanks in advance.

    Read the article

  • Using Monitor Class

    - by Mubashar Ahmad
    Dear All I would like to ask couple of Questions regarding the use of Monitor Class in .Net. To understand the Questions please look at the following Code. public class MyClass { private List<int> _MyCollection = new List<int>(); public void GetLock() { Monitor.Enter(_MyCollection); } public void ReleaseLock() { Monitor.Exit(_MyCollection); } public void UpdateCollection(/*anyparam*/) { //update collection without lock on collection } } public class MyAppMain { private static MyClass myclass = new MyClass(); public static void main(args) { try { myclass.GetLock(); //an operation that does not do any update on myclass but wanted //to ensure that the collection within myclass never update //while its doing following opetion //Do somthing } finally { myclass.ReleaseLock(); } } } Now is this the right use of monitor and do i need to use Pulse or PulseAll to signal waiting thread and if so than should use plus before or after Exit function? Regards Mubashar

    Read the article

  • Monitor and Terminate Python script based on system resource use

    - by Vincent
    What is the "right" or "best" way to monitor the system resources a python script is using and terminate it if the resource use exceeds some predetermined values. In my case memory usage is of concern. I am not asking how to measure the system resource use although I am open to suggestions. As a simple example, let's assume I have a function that finds prime numbers less than some large number and adds them to a list based on some condition. I don't know ahead of time how many prime numbers will satisfy the condition so I what to be sure to terminate the function if I use up to much system memory (8gb lets say). I know that there are ways to monitor the size of python objects. What I don't know is the proper way to monitor the size of the list and exit is to just include a size test in the prime function loop and exit if it exceeds 8gb or if there is an "external" way to monitor and exit.

    Read the article

  • Monitor Screen Independent Forms size & Control Size?

    - by Thomas
    in various case i have seen that when we run apps in various pc with different monitor size then win form behave differently. sometime the form get bigger and as a result few control on that form will not visible.so please tell me how to design win apps in such a way that what ever the monitor size would be the form size and control position will behave same way in all the pc monitor size.please guide me.thanks.

    Read the article

  • Start program on a second monitor?

    - by stukelly
    Is there a way to specify which monitor a application appears on in Delphi or C++Builder? I am developing a simple program for a customer, which displays kitchen orders on a secondary monitor, generated by a hospitality system. Currently they need to manually drag the window onto the second monitor after it starts.

    Read the article

  • Multiple Graphics Cards on Fedora 15 (Gnome 3)

    - by Michael
    I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

    Read the article

  • Prevent monitor from powering on

    - by concretemixer
    I'm turning off the monitor using SendMessage(HWND_BROUADCART, WM_SYSCOMMAND, SC_MONITORRPOWER, 2). That works, but the monitor turns back on when someone touches the keyboard or mouse. I tried to get rid of this using the DevicePowerSetDeviceState function with DEVICEPOWER_CLEAR_WAKEENABLED for the keyboard and mouse: it returns no error, but has no effect either. How can I prevent the monitor from powering back on in Vista and Windows7?

    Read the article

  • eeePC 1001HA/1101HA max resolution when connected to external display?

    - by Marco Demaio
    Hello, I would like to buy a new Eee PC 1001HA or 1101HA. I know the max display resolution is: 1024x600 for eeePC 1001 and 1366x768 for eeePC 1101 But what's the max resolution of the graphic board when connecting these two types of eeePC to an external LCD monitor??? Let's say the external LCD monitor supports a full HD resolution of 1920x1080, are these eeePC graphic boards able to go up to such resolution??? It's really incredible to me, how such a useful information is missing everywhere on every ASUS website. Eee PC are very well suited to be connected to external monitor, so I can't believe how difficult is to find out this information. I downloaded aldo the manual, but it's not in there too. So I was hoping somone has got one and knows the answer. Thanks!

    Read the article

  • Where can I compare monitors with a given VESA mount?

    - by Dan Rasmussen
    I am looking into purchasing a dual-monitor setup, and need to purchase two monitors with VESA MIS-D mounts. My only problem is that that information doesn't seem to be readily available on most shopping websites. Neither Amazon nor Newegg seem to have the information searchable or filterable. I could shop for monitors, then Google around to see if they support VESA MIS-D, but is there a better way? Is there a resource (not necessarily a store - once I find a monitor I can shop elsewhere) where I can browse a variety of monitor specs and reviews while only looking at monitors with a certain VESA mount?

    Read the article

  • DVI to VGA adapter only working in one output

    - by Tom Jenkinson
    I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

    Read the article

  • How can I connect a blu-ray player to a VGA screen?

    - by zaplwo
    Basically, I have a blu-ray player that I wanted to be connected to a projector and a monitor screen at the same time, so I got a component splitter and a component to VGA cable. The splitter works fine but the component to VGA adapter doesn't show anything on the monitor screen; is like if nothing is connected to it. I already change monitors but 3 monitors do the same. Anyone have any idea why this is happening or how can I connect the monitor and the projector to the blu-ray?

    Read the article

  • Perfmon quick rundown

    - by anon
    I've known quite along while about performance monitor on Windows. I have decided now to create a scheduled performance monitoring of my entire system so I can find bottlenecks for future improvements. So as you can imagine this is going to run 24/7 so I can identify peak utilization. With performance monitor on Windows 7 for example where are the logs stored (c:\perfmon)? Is there a log size? Even better is the a website that can get me up to speed with scheduling and best practices of perfmon? (I don't need an explanation of what I can monitor)

    Read the article

  • Does it exists a way to do a (software) switch between DVI and VGA screens?

    - by gogolb
    I'd like to know if there is a way (a software, a keyboard combination, etc...) to switch between DVI and VGA screen on the same monitor. I've two PCs connected to the same monitor, far away (80cm) from me. To push the monitor button is not so easy and comfortable as could seems, moreover if you have to do it almost 20 times a day. I've tried to check on search engine/Samsung (SyncMaster SA450) site for a solution but with no success. Any suggestion? Thank you all in advance, gb

    Read the article

  • What factors should be taken into consideration before buying a computer Moniter (display/screen)?

    - by coding crow
    I work on computer for most of waking day and have been using a 13.3" laptop. I was planning to buy a good monitor/screen/display for sometime now but was lazy. Now I have developed Computer Vision Syndrome and buying a monitor has become immediate priority. I have spend some time on net and trying to understand what should I buy and why? I could only zero down on the size (20") and LED and looking for advice on many other factors like resolution, pixel density, panel technology and so forth. It will be great help if someone experienced can show shed some light on computer monitor best for the programmers spending 8 to 10 hours in front of the screen.

    Read the article

  • Problems using dual resolver

    - by user315228
    Hi, I ma using dual resolver and having a problem. Following is what i get when i run through ant in debug and verbose mode([http://repo1.maven.org/maven2/axis2/axis2/working@commons-lang/[email protected]]) [ivy:retrieve] resolved ivy file produced in c:\temp\ivy\[email protected] [ivy:retrieve] :: downloading artifacts :: [ivy:retrieve] [NOT REQUIRED] config#ego;4.3.1!ego.conf [ivy:retrieve] trying [http://repo1.maven.org/maven2/axis2/axis2/working@commons-lang/[email protected]] [ivy:retrieve] tried [http://repo1.maven.org/maven2/axis2/axis2/working@commons-lang/[email protected]] [ivy:retrieve] HTTP response status: 404 url=[http://repo1.maven.org/maven2/axis2/axis2/working@commons-lang/[email protected]] [ivy:retrieve] CLIENT ERROR: Not Found url=[http://repo1.maven.org/maven2/axis2/axis2/working@commons-lang/[email protected]] [ivy:retrieve] ibiblio: resource not reachable for axis2#axis2;working@commons-lang: res=[http://repo1.maven.org/maven2/axis2/axis2/working@commons-lang/[email protected]] [ivy:retrieve] WARN: [NOT FOUND ] axis2#axis2;working@commons-lang!axis2.jar (235ms) [ivy:retrieve] WARN: ==== commons-lang: tried [ivy:retrieve] WARN: ==== ibiblio: tried [ivy:retrieve] WARN: [http://repo1.maven.org/maven2/axis2/axis2/working@commons-lang/[email protected]] [ivy:retrieve] [NOT REQUIRED] axis#axis-saaj;1.4!axis-saaj.jar [ivy:retrieve] [NOT REQUIRED] axis#axis-wsdl4j;1.5.1!axis-wsdl4j.jar Can you please tell me what is wrong with my ivysetting file or wrong with ivy file? Following is excerpt from ivysettings.xml <dual name="dual4" <filesystem name="commons-lang" <ivy pattern="${localRepositoryLocation}/[module]/ivy/ivy.xml"/ </filesystem <ibiblio name="ibiblio" m2compatible="true" usepoms="false" / </dual The problem (may be) is for each and every dependancy that i defined i have seperate ivy.xml. and just one reolver as above? like just for an exampe, for axis2.jar i have two dependancies in another ivy.xml, the dependencies are axis-saaj and axis-wsdl4j. Please help Thanks, Almas

    Read the article

  • Dual boot nt4 and windows 98

    - by ItFinallyWorks
    I am trying to dual boot nt4 and windows 98 se (don't laugh - old computer). I have seen Microsoft's instructions for doing this, but it limits windows 98 to have a Fat16 partition (NT4's NTLDR doesn't understand FAT32) and therefore only 2GB of disk space. I really need it to have more than that. I started with Win 98 (on the 1st partition), repartitioned the disk, then added NT4 on the 2nd partition. NT4 took over the bootloader (as expected), so NT4 boots, but Win 98 doesn't. Right now I am working in VMWare so I can use nonpersistent hard drives (IDE like the real computer) to recover from errors easily. I've tried using XPs NTLDR using the instructions here: http://www.nu2.nu/fixnt4/ , but I got weird errors from NT4 and it never really worked. If XP's NTLDR would work, that should be able to boot both OSes. I've also tried using GRUB. In theory that should work. In fact when booting from super grub disk, it does. But as soon as I install grub to disk, Win 98 boots, but NT 4 blue screens at boot with a 0x0000007b inaccessible_boot_device error (that can be alot of things see MS kb 822051). The incantation I'm using for GRUB 1 is rootnoverify (hd0,1) makeactive chainloader +1 boot So, anybody have some suggestions?

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >