Search Results

Search found 8706 results on 349 pages for 'dual monitor'.

Page 67/349 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

• Remote Desktop AND monitor fail on restart (Win2008R2)

  - by Wesley

  I am in the process of building a small 3 server farm. Each machine is running Window Server 2008 R2. As is normal, I am in the process of installing patch after patch to bring the machine up to snuff. Every time I restart the machine, or most every time, when I try to remote in to the machine I get the Log In window, but then almost immediately I get the message that my remote session was ended. If I physically walk over to the machine and plug in a monitor and keyboard, I see nothing. If I leave the keyboard and monitor in and restart the machine by force, the computer reboots just fine. When windows starts, I get no error message about windows not starting or being shut off unexpectedly. Once I log into the machine physically by the keyboard, I can then remote in to the machine at that point. Very confused. This happens on all 3 machines, these machines have different hardware.

  Read the article

• Monitor disk I/O for specific drive in OS X

  - by raffi

  In my Macbook Pro, I have two internal drives and I've connected a third drive via USB in enclosure. I am currently doing a secure wipe of the external drive and I was interested in seeing what the disk I/O was for that particular drive, but when I use Activity Monitor I only see the total disk usage for all drives combined. Is there any way to monitor a specific drive's total I/O, preferably via a built-in or free method? I don't want to filter by process ID. I just want to filter by mounted disk.

  Read the article

• Using external monitor and screen resolution?

  - by Johnydep

  it might sound very basic question but i need some help. I have lenovo Ideapad y560p which offers a maximum resolution of 1366px x 768px. Now i am planning to buy an external monitor, and i short listed some FULL HD resolution monitors, but it is my understanding that even with FULL HD, i would only achieve the best resolution my laptop supports. Is it true? And also if this is the case, should i really go for an HD monitor or settle down with a lower resolution version? 2ndly, is there any way to increase resolution with simple upgrade? or it is not possible without voiding the warranty??

  Read the article

• Recommend a desktop app to monitor port 80 on servers

  - by busyone

  Hello, I did some googling but was unsuccessful, so I am posting here. I am looking to get an app (preferably free/open source) to monitor my servers on port 80 that would send me an email/text when some predefined timeout triggers. I could probably write something in VB to do this but i am burried with projects, why reinvent the wheel. I know there are services out there that want you to pay $5/month to do so, I was thinking about a Windows app that would sit on my computer and simply monitor predefined list of IPs on port 80. Thanks!

  Read the article

• Windows XP dual screen problems, user account related

  - by Chris

  I have had this issue with a few laptops now and it looks like it is some sort of user account problem. Specifics of the system are: Dell Laptop Windows XP Pro SP3 Non-domain member computer DLP Projector connected to laptop via VGA I use this setup almost daily to do presentations, always the mirrored display mode where I can see on the laptop monitor the same thing that is displayed on the projector. Today, when I boot up, I get the mirrored display at the login screen, but after I log in, it switches to Extended Desktop (like two desktops side-by-side). Fn+F8 just cycles through all the normal settings except the mirrored display. I created a new user account on the computer and it performs normally. Mirrored display works as normal. I have run into this about 4 times now and it always can be solved by creating a new user account on the computer, and then all is well. I would like to either: 1. Find a way to reset the customized settings for a specific user account which would hopefully make this go away, or 2. Find the specific setting that causes this so that I can easily fix it when the problem comes up. Creating new user accounts is kind of a pain and a easy fix must be out there somewhere.

  Read the article

• Dual DC Time Service

  - by poconnor

  I believe I'm having an issue with my Domain Controllers and Time Server. On my back up DC, I keep seeing a warning stating "The time service has stopped advertising as a time source because the local clock is not synchronized." Does this mean that my backup DC believes it's a Time Server? My PDC should be the time server and I have gone through setting up the PDC as the time server. I was not around for the original setup of the time server with the old PDC and Backup DC. But I believe the old PDC was the time server so I setup the new PDC as the new time server, when I decommissioned the old PDC. Is it possible that the Backup DC was setup as the time server and it still thinks it's suppose to be giving out time to everyone? Registry for PDC has NTP Registry for Backup has NT5D5 Results of w32tm /monitor Getting AD DC list for default domain... Analyzing:delayoffset from DC1.local..com Stratum: 4 delayoffset from DC1.local..com Stratum: 3 Warning: Reverse name resolution is best effort. It may not be correct since RefID field in time packets differs across NTP implementations and may not be using IP addresses. DC2.local..com[192.168.1.8:123]: ICMP: 1ms NTP: -0.6349491s RefID: DC1.local..com [192.168.1.9] DC1.local..com *** PDC ***[192.168.1.9:123]: ICMP: 0ms NTP: +0.0000000s RefID: wwwco1test12.microsoft.com [65.55.21.20]

  Read the article

• Windows 7 pro remote desktop true multi monitor support patch or hack

  - by Ryan D

  After hours of research the closest i came to any patch that could fix this was a concurrent sessions patch which is not what i want. I have two machines both windows 7 professional. Its not an option to upgrade either to ultimate as the computer being remoted is in another state at our corp office. I need Dual monitor support and would have used the multimon i:1 edit thing however the other tower is not Win 7 ultimate. I have read over and over how it is not supported except with ultimate and enterprise and 2008 server. What have they put into windows 7 ultimate that is not in Win 7 pro and how can i get it or patch Win 7 pro to give it the same functionality. I would have paid for a software patch had i been able to find it anywhere. Summary: I am looking for the ability to remote to a Win 7 pro computer with another Win 7 computer while being able to use Dual monitors. Is there anyone that has the skill or balls to help with this? Most Respectfully Ryan

  Read the article

• How to compare old laptop to new laptop?

  - by Lasse V. Karlsen

  I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

  Read the article

• How to compare old CPU to new CPU?

  - by Lasse V. Karlsen

  I hope this question doesn't get closed at once :) I have an old laptop, a Compaq NC4200, which is going its final laps around the track these days. Battery is dead, and everything kinda runs slow. It also has only 1GB of memory, and even though I don't know if it can take more, I probably wouldn't be able to get hold of any that matches without having to special order it. The size, however, has been ideal for my usage pattern, so I'm looking to replace it with a similarly sized laptop, at least in the same size category. However, it's been a while since I tried keeping track of CPUs, so I have a question. The old laptop has a Intel Pentium M 760 1.86GHz processor. One laptop I found online has a Intel Pentium SU4100 1.3GHz dual-core. This type of processor seems to be quite common in the price and size-range I've been looking. What kind of relative performance boost could I expect from the old one to the new one? I am not expecting a "about 7.45x speed", but some indication would be nice. For instance, dual-core tells me it might be akin to 2.6GHz, but I assume I can't simply compare 1.86GHz to 2.6GHz and expect the new one to run about 1.4x as fast, I expect more these days. Or is that unrealistic for this kind of processor? Do I need to up my price range and go for a 2+ GHz processor?

  Read the article

• Why does my Belkin Play router regularly stop working for a few minutes at a time?

  - by YeahStu

  I recently purchased a Belking Play dual-band router for my home. About every few hours, the router stops working or "cuts out" for several minutes before coming back online automatically. My old one did this as well. I figured out a main problem was my wireless home phone, which sends a 2.4GHz signal. Anytime someone would call the phone, my router would get interrupted. Therefore, I unplugged this phone and got a wired phone. Unfortunately, my wired phone has the same problem. Therefore, I unplugged the wired phone. Unfortunately, my router still has regular issues. I live in a home with neighbors within close proximity to me, so it might be possible that their devices are the ones causing me problems. How can I determine what is causing my router problems? I thought that the point of a dual-band router was that if a signal was interfering on one band then it would be uninterrupted on another. However, it seems that is not the case. Does anyone have any tips on how to troubleshoot this or any knowledge you can share to properly set my expectations?

  Read the article

• Is 2 GB of RAM better than 2.5 GB?

  - by pibboater

  My laptop has two slots for RAM, and currently has two 512 MB chips, for 1 GB. Windows XP is running terribly slow on it, so I want to upgrade the RAM. I could buy two 1 GB chips to replace both of the current 512 MB chips, to give me 2 GB of RAM. Or, the price is the same to buy one 2 GB chip, to replace just one of the 512 MB chips, and give me 2.5 GB total. The RAM it takes is PC2-4200 533MHz DDR2. What do you think would be better: buying two 1 GB chips so it can take advantage of dual-channel operation, or buying one 2 GB chip to end up with more total RAM but not dual-channel operation? Like I said, price is the same, so performance is the only consideration. I'm not doing anything especially intensive like video or photo editing -- just having multiple Office programs open, playing music, browsers, etc., but currently even opening the first application takes forever. If it matters, the laptop is a Toshiba Qosmio G25-AV513 running Windows XP Media Center SP3. Thanks! Kevin

  Read the article

• Can I boot up a virtual machine natively?

  - by Anshul

  My question is: Is is possible to run a virtual machine natively on your hardware if you have installed the proper drivers etc? In other words, can I use a VHD as a regular hard drive to boot from? The reason I want to do this is that I do both graphics-intensive and audio-intensive work, but my computer is not powerful enough to handle both at the same time and many times I install a bunch of audio programs that I don't want affecting the stability of my graphics programs. Basically I wanted to have sandboxing between the two sets of applications. So I tried running the graphics-intensive programs in a VirtualBox VM and the audio-intensive work natively (simply because it's a pain to route ASIO audio devices in/out of VirtualBox). This kind-of works - the graphics-intensive stuff is tolerable, but still relatively slow, because it's running inside a VM. So my next idea was to just dual-boot and install the graphics and audio programs in separate partitions but I frequently use them in tandem, so it wouldn't be practical to reboot my machine every time I need to use the other set of programs. But I could live with this scenario: If I need to do more audio-intensive stuff, I'll just boot up to the audio partition and run the graphics programs in a VM, and then when I'm working heavily on the graphics part, I'll just boot the graphics partition as a regular OS directly on the hardware. Is this possible? For example by booting up a VHD as a regular hard drive? Or by setting up dual-boot, and every time the audio partition is shut down, synchronize the graphics VM VHD with the native graphics partition? Is it practical, given the above scenario? And if it's not possible, barring buying another computer, can anyone suggest a best-of-all-worlds setup (the two worlds being performance, sandboxing, and running in parallel) for the above scenario? Thanks in advance.

  Read the article

• ATI Firepro v4800 3 monitor support

  - by Jared275

  I have an interesting, yet very frustrating problem. I have two computers, both running win7 32 bit, and both with ATI Firepro V4800 graphics cards. Both are using the DVI port and two DP to DVI adapters to connect 3 monitors. One of them is able to display three desktops, while the other fails at enabling the third, displaying "cannot save changes" in display properties while requiring that one monitor must be disabled when making the change in CCC. I've verified that both computers have the same driver version and that both are using the same DP-DVI adapters. This articles suggests a few things to try, but none of its suggestions seem to work either. I'm kind of at my wits end, hence my posting here. If this is not an appropriate question for SU, I apologize. I admit that I am not very familiar with the differences between dual link and single link DVI, and that is something I have not verified is standardized between the two computers. Is that a possible reason one is working and the other isn't? How do I check if the DVI cable is a single link, or dual link?

  Read the article

• Is 1GB + 1GB RAM better than 2GB +0.5GB?

  - by pibboater

  My laptop has two slots for RAM, and currently has two 512 MB chips, for 1 GB. Windows XP is running terribly slow on it, so I want to upgrade the RAM. I could buy two 1 GB chips to replace both of the current 512 MB chips, to give me 2 GB of RAM. Or, the price is the same to buy one 2 GB chip, to replace just one of the 512 MB chips, and give me 2.5 GB total. The RAM it takes is PC2-4200 533MHz DDR2. What do you think would be better: buying two 1 GB chips so it can take advantage of dual-channel operation, or buying one 2 GB chip to end up with more total RAM but not dual-channel operation? Like I said, price is the same, so performance is the only consideration. I'm not doing anything especially intensive like video or photo editing -- just having multiple Office programs open, playing music, browsers, etc., but currently even opening the first application takes forever. If it matters, the laptop is a Toshiba Qosmio G25-AV513 running Windows XP Media Center SP3. Thanks! Kevin

  Read the article

• LCD repair parts for Gateway FPD2275W

  - by eidylon

  Hi all, I am wondering if anyone can point me to someplace where I can buy an inverter and/or backlight bulb for a Gateway FPD2275w LCD monitor. I've been googling, and looking on eBay, but can't seem to find them. I need to repair a monitor... I've done so before with a laptop LCD, so yes, I do know what I'm in for. I just need to find where to buy the parts. Thanks in advance!

  Read the article

• Old Hardware Specifications

  - by billswift

  Anyone know where I can get specs for old monitors and soho computers? I'm setting up some old computers as linux boxes and especially need monitor specs for setting X Window System parameters. Right now I need specs for a Packard Bell 1024S monitor.

  Read the article

• 1680x1050 via VGA won't work correctly in Windows 7 32bit

  - by Boldor

  I am trying to connect a Samsung 22" SyncMaster with my laptop running Windows 7 32-bit, an AMD HD 6500 Mobility. Though Catalyst Control Centre as well as Windows identify the correct resolution of 1650x1080, and it is selected, it isn't displayed. Looks more like a lower resolution that's getting stretched over the monitor. The weird part: The monitor worked for years without problems, one day it decided not to work properly anymore. Maybe some update issue, I have no idea.

  Read the article

• Calculating Screen Resolutions Using WPF

  - by Jeff Ferguson

  WPF measures all elements in device independent pixels (DIPs). These DIPs equate to device pixels if the current display monitor is set to the default of 96 DPI. However, for monitors set to a DPI setting that is different than 96 DPI, then WPF DIPs will not correspond directly to monitor pixels. Consider, for example, the WPF properties SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth. If your monitor resolution is set to 1024 pixels wide by 768 pixels high, and your monitor is set to 96 DPI, then WPF will report the value of SystemParameters.PrimaryScreenHeight as 768 and the value of SystemParameters.PrimaryScreenWidth as 1024. No problem. This aligns nicely because the WPF device independent pixel value (96) matches your monitor's DPI setting (96). However, if your monitor is not set to display pixels at 96 DPI, then SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth will not return what you expect. The values returned by these properties may be greater than or less than what you expect, depending on whether or not your monitor's DPI value is less than or greater than 96. Since the SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth properties are WPF properties, their values are measured in WPF DIPs, rather than taking monitor DPI into effect. Once again: WPF measures all elements in device independent pixels (DIPs). To combat this issue, you must take your monitor's DPI settings into effect if you're looking for the monitor's width and height using the monitor's DPI settings. The handy code block below will help you calculate these values regardless of the DPI setting on your monitor: Window MainWindow = Application.Current.MainWindow; PresentationSource MainWindowPresentationSource = PresentationSource.FromVisual(MainWindow); Matrix m = MainWindowPresentationSource.CompositionTarget.TransformToDevice; DpiWidthFactor = m.M11; DpiHeightFactor = m.M22; double ScreenHeight = SystemParameters.PrimaryScreenHeight * DpiHeightFactor; double ScreenWidth = SystemParameters.PrimaryScreenWidth * DpiWidthFactor; The values of ScreenHeight and ScreenWidth should, after this code is executed, match the resolution that you see in the display's Properties window.

  Read the article

• How to monitor process hogging CPU on a remote server

  - by sergeb

  I have a remotely hosted (virtual, VMware) dedicated server (Windows 2008 Server Web edition w/ SP1) that I can only connect to over Remote Desktop. Lately, a process hogs CPU for ~40 minutes most every day (at a random hour) and brings all web sites on the server down. While this is going on I also cannot connect using Remote Desktop to investigate on what is that process... Promptly after 40 min I can RD and the first thing I see on the Perf Monitor is that there was something topping the CPU at 100% and stops just before I'm able to RD... I'm aware of the beginning and end of this for I have monitors setup that email me up/down status of the web sites but I'm locked out while this is happening - can't RD to the server until it's over (and too late to see the Task Manager/Process Explorer picture). What is the best way/tool to setup on the server to continuously monitor all processes so when this happens I login and "replay" it to find the process causing this trouble? (I have no control over the virtual/VMware setup for it is hosted by a 3rd-party but I have most full control over my dedicated machine) Thanks in advance!

  Read the article

• My EliteBook is not auto picking 1080p for external monitor, poor display on forcing

  - by Griever

  I'm connecting my Samsung LED S22A300B to my HP EliteBook 6930p through VGA out. Laptop has Intel 4500MHD video card. I have latest drivers installed for both card and monitor. Only 800x600 and 1024x768 are shown. A lot of other people get this problem when they use it with docking station as discussed here. But I am not using any docking station. The monitor works great with my desktop though. As advised on the aforementioned page, one of the things I tried was to force the resolution using Intel's "custom resolution" feature. I installed PowerStrip on my desktop and copied advanced timing values(front/back porch,sync width, etc.) from there and then used the same values while defining a custom resolution in my laptop's Intel graphics utility. As a result, I got the 1080p resolution but the display is poor. Text has some weird colored shadow and sometimes on images too. What should I do?

  Read the article

• How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

  - by Jim Jeffers

  I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

  Read the article

• Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

  - by mynameiscoffey

  My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

  Read the article

• 1080p monitor: connected through VGA - perfect, HDMI - awful

  - by develroot

  When I connect my 23" monitor (1920x1080) to my pc through HDMI, I encourage some problems. It's not full screen That's it. There are ~1cm black borders on right and left side and ~0,5cm black borders on the top and the bottom of the monitor. That's pretty frustrating. I tried adjusting overscan, but I can't mannualy type the % of overscan that I need. I can only select between ex. 8 and 10% in AMD Vision Engine Control center, but what I need is 9%. Next, even if i select 10% and the image fits all the corners, but after log off all the settings are lost and I have to do it again and again. Text, images, everything looks blurry That surprised me a lot. Should'nt HDMI quality be better than VGA's one? When connected through HDMI, the text isn't readable. It's like a very low refresh rate, although i'm running at 60Hz. Also the text has something like little shadows, very very annoying. Are there any tips to get the same quality as with VGA, with HDMI ? (running on integrated ATI Radeon HD4200, which, appearently, is the best card I have ever seen in terms of integrated ones)

  Read the article

• How can I setup BluePill to Monitor a Rails App Running via Passenger (mod_rails)

  - by Jim Jeffers

  I recently launched a site running phusion passenger. Unfortunately, the site went down due to a frozen thread. I was able to save the server by doing kill -9 to the specific PID. Still though, I thought passenger was able to manage this automatically. I have a server with 1GB of memory running one rails app with passenger allotted up to 7 instances. However, when I came to discover the site went down I found that passenger had spawned 6 instances with one of them using up over 800mb of memory causing the server to swap. As a result I am hoping to setup something like bluepill on the server but I'm slightly confused as to how you go about doing it. Mainly because bluepill expects to start/stop the processes it's monitoring. However, in our case, passenger already restarts processes for us so we only need to monitor the pids of passengers instances and kill them once they've gotten too large. Has anyone here setup BluePill to monitor a rails app running under phusion's passenger? Any insight would be useful.

  Read the article

• Daisy-chainable DisplayPort Monitors

  - by thepurplepixel

  I am the proud new owner of a MacBook Pro with a mini-DisplayPort. My desk setup used to allow me to position the screen of my old MacBook beside an external monitor, essentially allowing dual-head. It was also advantageous that my old MBP and my external monitor had the same resolution, 1440x900. Now, I'm searching for a set of two monitors that I can use a HengeDock with. Unfortunately, the MacBook Pro suffers from having only one mini-DisplayPort. Looking up the spec for DisplayPort 1.2 (which the MBP supports), DisplayPort daisy chaining is supported. What I'm looking for is a monitor that has two DisplayPorts so I can daisy chain two monitors off the single mini-DisplayPort. What I don't want is a USB-based video solution. I need full acceleration on both monitors; an external video card won't cut it. I hope I don't have to wait a few years for these monitors to come out. TL;DR: I need two monitors with two DisplayPorts each that I can daisy-chain. Thanks!

  Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >