Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 64/421 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Raid0 setup - What should 'my computer' say?

    - by superexsl
    Hey, I'm not a hardware person, so maybe someone here could help me. I ordered a PC from Dell that has "Serial ATA Raid 0 "Stripe"(7200RPM)Dual HDD" (2x500gb). However, I've just noticed that there's only one HD of 1TB (which is the default option when ordering). Should I be seeing two HDDs in "My Computer" or does the Raid0 setup simply improve performance rather than have (and display) two individual HDDs? How can I check if my computer does have a 'raid0' setup? Thanks

    Read the article

  • Network connection thou a wall

    - by BCS
    I have a place where I want to set up a network connection thou a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware?

    Read the article

  • Network connection through a wall

    - by BCS
    I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware?

    Read the article

  • I have 2 identical windows 2008 r2 servers with 32G RAM, one shows "Installed Memory(Ram): 32.0GB" a

    - by c0m4
    the server model: HP Poliant DL160 G5, both servers have identical product ID. for some reason one of the servers have 4GB ram reserved. it shows in the memory tab on the Resource monitor as "Hardware Reserved". I've googled it a bit and found some post related to msconfig boot parameters (but mine are properly set) and some post related to memory remap option in the bios but it is not available in my servers bios so in a bit lost... help?

    Read the article

  • How much power supply does a typical PC build need?

    - by Wesley
    I am building a system for a friend. The potential specs are like this so far: ASUS A8N-VM motherboard AMD Athlon 64 3200+ @ 2.0 GHz Any 7200RPM SATA HDD Palit GeForce 8800GT 512MB GDDR3 PCIe One DVD/CD combo drive Creative SB Live! 5.1 sound card I was wondering what wattage of power supply would be able to support this hardware. I had a 350W in mind... would that do?

    Read the article

  • What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

    - by Tyler
    Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

    Read the article

  • Maximum number of monitors Win 7 Supports?

    - by cpuguru
    I want to set up a system with (9) monitors arranged in a 3x3 grid. Is this configuration possible with Windows 7? Does it max out at a set number of monitors? Any suggestions about known working hardware combinations would be much appreciated. Currently considering (3) nVidia Quadro NVS420 cards to drive the array.

    Read the article

  • Is it better to leave your computer on all the time?

    - by Joe Schmoe
    Most of the hardware failures I've had (especially hard drive crashes) have happened when turning the machine on, so is it better to leave your computer on all the time or not? For years, I've heard arguments for... no power surges on start-up steady operating temperature for components and against... unnecessary wear on hard drives power wastage and I'm still not sure.

    Read the article

  • Computer restarts infinitely after Bios/Motherboard screen

    - by user13176
    Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

    Read the article

  • WCF and Firewall

    - by Jim Biddison
    I have written a very simple WCF service (hosted in IIS) and web application that talks to it. If they are both in the same domain, it works fine. But when I put them in different domains (on different sides of a firewall), then the web applications says: The request for security token could not be satisfied because authentication failed. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ServiceModel.FaultException: The request for security token could not be satisfied because authentication failed. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. The revelant part of the service web.config is: <system.serviceModel> <services> <service behaviorConfiguration="MigrationHelperBehavior" name="MigrationHelper"> <endpoint address="" binding="wsHttpBinding" contract="IMigrationHelper"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <endpoint binding="httpBinding" contract="IMigrationHelper" /> </service> </services> <behaviors> <serviceBehaviors> <behavior name="MigrationHelperBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="true"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> The web appliation (client) web.config says: <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IMigrationHelper" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384"/> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false"/> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm=""/> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true"/> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://mydomain.com/MigrationHelper.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IMigrationHelper" contract="MyNewServiceReference.IMigrationHelper" name="WSHttpBinding_IMigrationHelper"> <identity> <dns value="localhost"/> </identity> </endpoint> </client> </system.serviceModel> I believe both these are just the default that VS 2008 created for me. So my question is, how does one go about configurating the service and client, when they are not in the same domain? Thanks .Jim Biddison

    Read the article

  • Floating point vs integer calculations on modern hardware

    - by maxpenguin
    I am doing some performance critical work in C++, and we are currently using integer calculations for problems that are inherently floating point because "its faster". This causes a whole lot of annoying problems and adds a lot of annoying code. Now, I remember reading about how floating point calculations were so slow approximately circa the 386 days, where I believe (IIRC) that there was an optional co-proccessor. But surely nowadays with exponentially more complex and powerful CPUs it makes no difference in "speed" if doing floating point or integer calculation? Especially since the actual calculation time is tiny compared to something like causing a pipeline stall or fetching something from main memory? I know the correct answer is to benchmark on the target hardware, what would be a good way to test this? I wrote two tiny C++ programs and compared their run time with "time" on Linux, but the actual run time is too variable (doesn't help I am running on a virtual server). Short of spending my entire day running hundreds of benchmarks, making graphs etc. is there something I can do to get a reasonable test of the relative speed? Any ideas or thoughts? Am I completely wrong? The programs I used as follows, they are not identical by any means: #include <iostream> #include <cmath> #include <cstdlib> #include <time.h> int main( int argc, char** argv ) { int accum = 0; srand( time( NULL ) ); for( unsigned int i = 0; i < 100000000; ++i ) { accum += rand( ) % 365; } std::cout << accum << std::endl; return 0; } Program 2: #include <iostream> #include <cmath> #include <cstdlib> #include <time.h> int main( int argc, char** argv ) { float accum = 0; srand( time( NULL ) ); for( unsigned int i = 0; i < 100000000; ++i ) { accum += (float)( rand( ) % 365 ); } std::cout << accum << std::endl; return 0; } Thanks in advance!

    Read the article

  • How do I figure out which SOC or SDK board to use?

    - by Ram Bhat
    Hey guys Basically I'm working on a model of an automated vacuum cleaner. I currently have made software simulation of the same. How do I figure out which SOC or SDK board to use for the hardware implementation? My code is mostly written in C. Will this be compatible with the sdk provided by board manufacturers? How do i know what clock speed,memory etc the hardware will need? I'm a software guy and have only basic knowledge about practical hardware implementations. Have some experience in programming the 8086 to carry out basic tasks.

    Read the article

  • What's the coolest hack you've seen or done?

    - by Robert S.
    As programmers, we've all put together a really cool program or pieced together some hardware in an interesting way to solve a problem. Today I was thinking about those hacks and how some of them are deprecated by modern technology (for example, you no longer need to hack your Tivo to add a network port). In the software world, we take things like drag-and-drop on a web page for granted now, but not too long ago that was a pretty exciting hack as well. One of the neatest hardware hacks I've seen was done by a former coworker at a telecom company years ago. He had a small portable television in his office and he would watch it all day long while working. To get away with it, he wired a switch to the on/off that was activated via his foot under his desk. What's the coolest hardware or software hack you've personally seen or done? What hack are you working on right now?

    Read the article

  • Graphics card initialisation problems when booting - requires a "double" boot

    - by DMA57361
    Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

    Read the article

  • PC runs very slowly for no apparent reason

    - by GalacticCowboy
    I have a Dell Latitude D820 that I've owned for about 2.5 years. It is a Core 2 Duo T7200 2.0GHz, with 2 GB of RAM, an 80 GB hard drive and an NVidia Quadro 120M video card. The computer was purchased in late November of 2006 with XP Pro, and included a free upgrade to Vista Business. (Vista was available on MSDN but not yet via retail, so the Vista Business upgrades weren't shipped until March of '07.) Since we had an MSDN subscription at the time, I installed Vista Ultimate on it pretty much as soon as I got it. It ran happily until sometime in the spring of 2007 when Media Center (which I had never used except to watch DVDs) started throwing some kind of bizarre SQL (CE?) error. This error would pop up at random times just while using the computer. Furthermore, Media Center would no longer start. I never identified the cause of this error. I had the Vista Business upgrade by this time, so I nuked the machine, installed XP and all the drivers, and then the Vista Business upgrade. Again, it ran happily for a few months and then started behaving badly once again. Vista Business doesn't have Media Center, so this exhibited completely unrelated symptoms. For no apparent reason and at fairly random times, the machine would suddenly appear to freeze up or run very slowly. For example, launching a new application window (any app) might take 30-45 seconds to paint fully. However, Task Manager showed very low CPU load, memory, etc. I tried all the normal stuff (chkdsk, defrag, etc.) and ran several diagnostic programs to try to identify any problems, but none found anything. It eventually reached the point that the computer was all but unusable, so I nuked it again and installed XP. This time I decided to stick with XP instead of going to Vista. However, within the past couple of months it has started to exhibit the same symptoms in XP that I used to see in Vista. The computer is still under Dell warranty until December, but so far they aren't any help unless I can identify a specific problem. A friend (partner in a now-dead business) has an identical machine that was purchased at the same time. His machine exhibits none of these symptoms, which leads me to believe it is a hardware issue, but I can't figure out how to identify it. Any ideas? Utilities? Seen something similar? At this point I can't even identify any pattern to the behavior, but would be willing to run a "stress test"-style app for as long as a couple days if I had any hope that it would find something. EDIT July 17 I'm testing jerryjvl's answer regarding the video card, though I'm not sure it fully explains the symptoms yet. This morning I ran a video stress test. The test itself ran fine, but immediately afterward the PC started acting up again. I left ProcExp open and various system processes were consuming 50-60% of the CPU but with no apparent reason. For example, "services.exe" was eating about 40%, but the sum of its child processes wasn't higher than about 5%. I left it alone for several minutes to settle down, and then it was fine again. I used the "video card stability test" from firestone-group.com. Its output isn't very detailed, but it at least exercises the hardware pretty hard. EDIT July 22 Thanks for your excellent suggestions. Here is an update on what I have tried so far. Ran memtest86, SeaTools (Seagate), Hitachi drive fitness test, video card stability test (mentioned above). The video card test was the only one that seemed to produce any results, though it didn't occur during the actual test. I defragged the drive (again...) with JkDefrag I dropped the video card

    Read the article

  • How to switch 'default' sound device controlled by hardware keys in Xubuntu?

    - by Ruth
    I installed xubuntu-desktop on a 12.04 Ubuntu upgrade after finding Gnome3 lacking. I've mostly been happy, but I've found an odd and frustrating bug. My laptop has two sound 'outputs' - an HDMI-out plug I never use, and the onboard speakers/headphones. For some reason, the hardware keys have been mapped to the HDMI output, even if I set it as 'fallback' in pavucontrol, and notify-osd only displays changes in the HDMI output (though the panel indicator volume control controls onboard sound). I'd ideally like both hardware keys and notify-osd to be looking at the onboard sound, though if I can't get notify-osd it's an acceptable loss. Having to click through a bunch of stuff to change volume is driving me crazy, though. Googling suggested that it /may/ be a Pulseaudio/ALSA conflict, but the hardware keys seem to change at least indicated volume in pavucontrol for HDMI as expected (I don't have an HDMI cable to test actual sound output)

    Read the article

  • What is the state-of-the-art for using Broadcom Crystal hardware?

    - by echo-flow
    I just bought a Dell Mini 1012, which comes with a Broadcom Crystal media accelerator chip. I'd like to know what is the current state-of-the-art with regard to using this hardware on Ubuntu? What I mean by this is, what is the best way to install drivers to make use of this hardware, and what media players currently support it? I've read that XBMC currently does, but what about gstreamer? Ideally, I'd like to find a solution so that I can accelerate Flash videos using the device. It seems like one strategy may be to download Flash videos to the hard drive and play them with an external, Crystal-enabled media player, and so that seems like one option, but I'm wondering if any of the free flash alternatives (Gnash and Lightspark) support hardware acceleration of flash video using the Crystal API? It seems like there is a lot of information about all of this on the web, but it's not consolidated, and seems like a rapidly moving target, so any insight anyone may have into this would be appreciated.

    Read the article

  • Is Adobe Flash 11.2 working with Nvidia hardware again in 12.04?

    - by Oranges
    I installed the newest Nvidia-Linux drivers version number 304.43 on 12.04 installation and all Flash Videos now show me "accelerated video rendering". Previous Nvidia drivers + Adobe Flash only rendered in software, at least since Adobe officially said they turned off "hardware acceleration" for Linux, because of unstable and unsecure drivers. Has this changed? Is hardware acceleration really back? Can anyone verify this as well? The Nvidia driver 304.43 patch notes said: Fixed a bug that caused VDPAU to hang when expanding the YouTube Flash Player. Hardware: Nvidia 8600M GT

    Read the article

  • Rack layout for future growth

    - by bleything
    We're getting ready to move to a new colo facility and I'm designing the rack layout. While we have a full rack, we only have 12U worth of hardware right now: 1x 1U switch 7x 1U servers 1x 2U server 1x 2U disk shelf The colo facility requires us to front-mount the switch and use a 1U brush strip, so we'll be using a total of 13U of space. Regarding growth, I'm reasonably sure we'll be adding another 4U in servers, 1-2U of network gear, and 2-4U of storage in the mid-term. Specific questions I'm hoping to get help with: where should I mount the switch? the LEDs are on top... should I group the servers by function with space for adding new machines? as an alternative, should I group servers based on whether they are production or staging? where in the rack should I start? in the middle? at the top? at the bottom? equally spaced? Here's a silly little ASCII diagram of what I'm thinking right now. Please feel free to tear my design apart, I've really no idea what I'm doing :) Any advice is very welcome. edit: to be clear, the colo is providing redundant power with UPS and generator, so that's why there's no power gear in the plan, except for the 0U PDU that I didn't diagram. 42 | -- switch ---------------------- 41 | -- brush strip ----------------- 40 | ~~ reserved for second switch ~~ 39 | ~~ reserved for firewall ~~~~~~~ 38 | 37 | -- admin01 --------------------- 36 | 35 | -- vm01 ------------------------ 34 | -- vm02 ------------------------ 33 | ~~ reserved for vm03 ~~~~~~~~~~~ 32 | ~~ reserved for vm04 ~~~~~~~~~~~ 31 | ~~ reserved for vm05 ~~~~~~~~~~~ 30 | 29 | -- web01 ----------------------- 28 | -- web02 ----------------------- 27 | ~~ reserved for web03 ~~~~~~~~~~ 26 | ~~ reserved for web04 ~~~~~~~~~~ 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | -- db01 ------------------------ 15 | +- disks ----------------------+ 14 | +------------------------------+ 13 | ~~ reserved for more ~~~~~~~~~~~ 12 | ~~ db01 disks ~~~~~~~~~~~~~~~~~~ 11 | 10 | +- db02 -----------------------+ 9 | +------------------------------+ 8 | ~~ reserved for db02 ~~~~~~~~~~~ 7 | ~~ disks ~~~~~~~~~~~~~~~~~~~~~~~ 6 | ~~ reserved for more ~~~~~~~~~~~ 5 | ~~ db02 disks ~~~~~~~~~~~~~~~~~~ 4 | 3 | 2 | 1 |

    Read the article

  • Multi-site WCF Service

    - by vault
    I have implemented a WCF service that will be used at Site A with 5 computers in the LAN accessing the service. What I would like to do is have an elevated user/administrator be able to use one of the 5 machines and query an identical service at Site B (also with 5 computers) that they will need to connect to by bypassing the LAN firewall.Accessing data from Site A to Site B (and vica-versa) need only be read-only Is there a standardised way to acheive this using WCF?

    Read the article

  • Howto monitor traffic between IIS and MSSQL

    - by kockiren
    Hello @all, i try to check how much traffic flows between MSSQL Server and IIS Server in different Locations. There are 1 ipcop in every Location and i download the tcpdump file from one Firewall and search for DST=ipmssql and SRC=ipIIS but i did not find the ip from the Database Server. But there are traffic between both. Any suggestions why i did not find the IP Adress from the MSSQL Server? Is this an configuration failure in IPCop or is the Traffic between ISS and MSSQL so strange :-) Regards Rene

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >