Search Results

Search found 4068 results on 163 pages for 'intel gma'.

Page 64/163 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• How to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  - by mehdi

  I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  Read the article

• Problems with Ubuntu and AMD A10-4655M APU

  - by Robert Hanks

  I have a new HP Sleekbook 6z with AMD A10-4655M APU. I tried installing Ubuntu with wubi--the first attempt ended up with a 'AMD unsupported hardware' watermark that I wasn't able to remove (the appeared when I tried to update the drivers as Ubuntu suggested) On the second attempted install Ubuntu installed (I stayed away from the suggested drivers) but the performance was extremely poor----as in Windows Vista poor. I am not sure what the solution is--if I need to wait until there is a kernel update with Ubuntu or if there are other solutions--I realise this is a new APU for the market. I would love to have Ubuntu 12.04 up and running--Windows 7 does very well with this new processor so Ubuntu should, well, be lightening speed. The trial on the Sleekbook with Ubuntu 12.10 Alpha 2 release was a complete failure. I created a bootable USB. By using either the 'Try Ubuntu' or 'Install Ubuntu' options resulted in the usual purple Ubuntu splash screen, followed by nothing...as in a black screen without any hint of life. Interestingly one can hear the Ubuntu intro sound. In case you are wondering, this same USB was trialed subsequently on another computer with and Intel Atom Processor. Worked flawlessly. Lastly the second trial on the Sleekbook resulted in the same results as the first paragraph. Perhaps 12.10 Beta will overcome this issue, or the finalised 12.10 release in October. I don't have the expertise to know what the cause of the behaviour is-the issue could be something else entirely. Sadly, the Windows 7 performance is very good with this processor-very similar and in some instances better to the 2nd generation Intel i5 based computer I use at my workplace. Whatever the cause is for the performance with Ubuntu 12.04 or 12.10 Alpha 2, the situation doesn't bode well for Ubuntu. Ubuntu aside, the HP Sleekbook is a good performer for the price. I am certain once the Ubuntu issue is worked on and solutions arise, the Ubuntu performance will probably be better than ever.

  Read the article

• Unity3d web player fails to load textures

  - by José Franco

  I'm having a problem with Unity3d Web Player. I have developed a project and succesfully deployed it in a web app. It works with absolutely no problem on my PC. This app is to be installed on two identical machines. I have installed them in both and it only works properly in one. The issue I have is on a computer it fails to properly load the models and textures, so the game runs but instead of the models I can only see black rectangles on a blue background. It has the same problem with all browsers and I get no errors either by the player or by JavaScript. The only difference between these computers is that one that has the problem is running on Windows 8.1 and the other one on Windows 8 only. Could this be the cause of the issue? It works fine on my computer with Windows 8.1. However both of the other computers have specs that are significantly lower than mine. I have already searched everywhere and it seems that it has to do with the individual games, however I think it may have to do with the computer itself because it runs properly in the other two. The specs on the computes I'm installing the app on are as follows: Intel Celeron 1.40 GHz, 2GB RAM, Intel HD Graphics If anybody could point me in the right direction I would be very grateful I forgot to mention, I'm running Unity Web player 4.3.5 and the version on the other two computers is 4.5.0

  Read the article

• Video lags/freezes in SMPlayer and VLC

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Why does video playback lag/freeze when I go into full-screen mode?

  - by RanRag

  When I try to play my video files in SMPlayer it works fine but as soon as I switch to fullscreen mode(16:9) following thing happens: 1) Video starts lagging. 2) Audio and video goes out of sync. 3) CPU usage rises to ~50%. 4) SMPlayer starts to hang. My current SMPlayer configuration: 1)Video Output Driver = x11(slow) 2)Audio Output Driver = alsa(0.0-HDA Intel) 3)Cache = 8192 KB 4)Threads for decoding(MPEG-1/2 and H.264 only = 2 Things I tried solve this problem: 1) Tried changing video o/p driver to xv,gl. 2) Tried changing audio o/p driver to pulse. 3) Tried increasing cache size and also tried using nocache. Everything works fine on windows but I don't want to switch to windows just to play video files. My system config: Acer Aspire One D270 Atom N2600(Cedar Trail) 1.6GHz 2GB Memory Intel GMA 3600 graphics. Ubuntu 12.04 Kernel Release: 3.2.0-23-generic-pae Rest all things are working fine I have no resolution issue, bluetooth, wireless also working fine. Just ask me to submit any other log file I will be happy to post. SMPlayer log MPlayer Terminal output Codec Information(currently playing file):

  Read the article

• Bluetooth not working on Acer 3820tg (Ubuntu 12.04)

  - by Iohannes

  After upgrading to 12.04 (it was done by a complete reinstallation), bluetooth doesn't work anymore. Before (I think it was Ubuntu 11.04), I just followed instructions on this page and copied /lib/firmware/ath3k-2.fw to /lib/firmware/ath3k-1.fw and everything was fine. But in 12.04, there isn't any ath3k-2.fw in the /lib directory, so this method is not possible. Also, pressing Fn+F3 doesn't work. I would appreciate any help. Some further information (I hope it's enough): dmesg [ 23.063710] Bluetooth: Core ver 2.16 [ 23.063740] NET: Registered protocol family 31 [ 23.063743] Bluetooth: HCI device and connection manager initialized [ 23.063746] Bluetooth: HCI socket layer initialized [ 23.063747] Bluetooth: L2CAP socket layer initialized [ 23.063972] Bluetooth: SCO socket layer initialized [ 23.066930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.066934] Bluetooth: BNEP filters: protocol multicast [ 23.068422] Bluetooth: RFCOMM TTY layer initialized [ 23.068428] Bluetooth: RFCOMM socket layer initialized [ 23.068430] Bluetooth: RFCOMM ver 1.11 lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID 046d:c05f Logitech, Inc. Bus 002 Device 004: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 005: ID 0402:9665 ALi Corp. Gateway Webcam hcitool dev Devices:

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• Ubuntu 12.04 server froze during the first boot after it was installed.

  - by user69021

  I installed Ubuntu server 12.04 to my new server and it failed on the first boot. It just stopped and I can't proceed any further. Server's specifications: Dell PowerEdge T620 CPU : Xeon E5-2665 2.4G x 2 RAM : 8GB RDIMM, 1333MHz x 12 HDD : 3TB Near Line SAS 7.2K x 8 RAID controller : PERC H710 GPU : NVIDIA Tesla C2075 x 4 I have a screenshot of the screen it stopped on but I cannot attach it because my privilege level is currently too low. ![freeze on boot][1] Here are the last messages while booting. [5.048743] Freeing unused kernel memory : 920k freed [5.049046] Write protecting the kernel read-only data : 12288k [5.052973] Freeing unused kernel memory : 1608k freed [5.056132] Freeing unused kernel memory : 1196k freed Loading, please wait... [5.070236] udevd[218]: starting version 175 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [5.089030] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [5.089518] megasas: 0x1000:0x005b:0x1028:0x1f35: bus 1:slot 0:func 0 [5.089739] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 [5.089937] megasas: FW now in Ready state [5.090427] dca service started, version 1.12.1 [5.091463] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [5.091578] Copyright (c) 2007-2011 Intel Corporation. [5.091712] igb 0000:06:00.0: PCI INT A -> GSI 16 (level,low) -> IRQ 16 [5.111090] megasas:IOC Init cmd success [5.123124] usb 1-1:new high-speed USB device number 2 using ehci_hcd What can I do about this?

  Read the article

• Why is my fresh install of 12.04 running slow?

  - by user75129

  Hey guys I'm a new linux user, I figured it would be the best for the laptop I just purchased because it's said to be faster than Windows 7. I'm currently dual-booting with Windows 7 Professial and Ubuntu 12.04. The laptop I am using is the LG X Note P210 Specs: Intel Core i5 470UM Dual Core clocked at 1.33GHz 12.5" HD LED LCD Screen at 1366 by 768 4GB DDR3 @ 1333 MHz RAM Integrated Intel HD Graphics Card 4 Cell Battery with 3150mAh It comes loaded Windows 7 Home Premium 64-Bit, it runs fine on that but my Ubuntu 12.04 runs slower than it and I don't understand why, it definitely has decent specs to run even a 64-bit operating system and do some gaming. Granted I know it's not the best but for a laptop it does the job so Ubuntu should work especially since it's said to make older units with worse specs run even better. I'm not all that familiar with coding and all so what are things I can do to optimize speed without overclocking? Boot up is fine, its program response time I believe, once Im in the actual OS, it lags, slows down, apps stop working, take forever to load up apps.

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• SD card won't appear after upgrade to 13.10

  - by Pixel

  My SD card won't mount when I put it into my lap top, everything was fine before the upgrade. The information about the SD card appears just fine when I type "sudo fdisk l " it just says that it doesn't have a valid partition table. When I type "_sudo blkid" I get the following answer: /dev/sda1: UUID="CCA8-9030" TYPE="vfat" /dev/sda2: UUID="8a1d135b-384b-432d-b608-64dcf09ada24" TYPE="ext2" /dev/sda3: UUID="7s6PtU-kj2Z-N8XD-0mzl-840i-i3HG-enlbAf" TYPE="LVM2_member" /dev/sr0: LABEL="Bamboo CD" TYPE="iso9660" /dev/mapper/ubuntu--vg-root: UUID="c9b521c8-7c9f-493b-95c8-a7d79c465318" TYPE="ext4" /dev/mapper/ubuntu--vg-swap_1: UUID="7f155ab6-e1b9-485b-a2bc-443c0622284d" TYPE="swap" When I use lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I've read the other threads and I couldn't really find any good answers, my card reader was compatible with the previous version of ubuntu, so technically it should still be compatible with the next version. Also I can't erase what's on the card, it contains important data which I need... :/ If you need anymore information just ask, I'll give it as soon as I can. Pixel.

  Read the article

• Ubuntu does not recognize my built-in monitor.

  - by B3tturTh3nU

  I've recently discovered of a boot problem Ubuntu has with my laptop. I have successfully installed Ubuntu on two other computers, and I've never experienced this problem. What happens is, after the live boot CD loads, the screen goes completely blank. Although, I suspected that there was no problem booting, so I loaded with BIOS only, which worked perfectly fine. Of course, not being very proficient with this, I have no idea what needs to be done to fix the problem. I have switchable graphics cards(the ATI Mobility Radeon HD 5650, and some low-end Intel card), and an Intel i5 quad core processor. I was booting with the Ubuntu 10.10 64 bit desktop distribution. If there's any more information you need from me, please let me know. EDIT: I was able to look into this a bit more, thanks to one of the comments provided, and I have some new information. Ubuntu does seem to be able to recognize both of my graphics cards. The problem I found was that, in the Xorg.0 log, it mentions that there were "no screens found." I'm using a notebook, so the screen is built in. Does anyone know of a way to get Ubuntu to recognize the monitor?

  Read the article

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• SOA performance on SPARC T5 benchmark results

  - by JuergenKress

  The brand NEW super fast SPARC T5 servers are available. The platform is superb to run large SOA Suite environments or to consolidate your whole middleware platform. Some performance advices, recommended for all workloads: Performance profile for SOA apps on Oracle Solaris 11 BPEL (Fusion Order Demo) instances per second OSB (messages / transformations per second) Crypto acceleration study for SOA transformations SPARC T4 and T5 platform testing, pre-tuning Performance suitable for mid-to-high range enterprise in stand-alone SOA deployment or virtualized consolidation environment shared with Oracle applications 2.2x to 5x faster than SPARC T3 servers 25% faster SOA throughput, core to core than Intel 5600-series servers (running Exalogic software) SPARC T5 has 2x the consolidation density of Intel 5600-class processors 2x faster initial deployment time using Optimized Solutions pre-tested configuration steps Over 200 Application adapters for easiest Oracle software integration Would you like to get details? We can share with you on 1:1 bases T5 SOA Suite performance benchmarks, please contact your local partner manager or myself! SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: T5,TS Sparc,T5 SOA,bechmark,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Slow USB 3.0 speeds

  - by Cygnus X

  Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

  Read the article

• I can't enable extra effects in Ubuntu 10.10. Please help?

  - by jasoncruz98

  I installed Ubuntu 10.10 alongside Ubuntu 11.10 to use an older version of Compiz. On Ubuntu 11.10, Compiz was enabled by default and I didn't need to use any graphics driver to enjoy the effects. All I had to do was install CompizConfig Settings Manager and enable those extra effects. That was Compiz 0.9.6. Now, after installing Ubuntu 10.10, when I first logged in, the graphics were slow. When I dragged a window from one end of the screen to the other, the whole screen would blur up and pixelate and it would be very laggy. I tried going to System Preference Appearance and selecting Extra effects on the Visual effects tab, but all I got was "Desktop effects could not be enabled". I don't know whether I should install the Additional drivers (proprietary) because my Internet is slow and it would take a long time. Furthermore, in Ubuntu 11.10, after I installed the proprietary graphics driver, I immediately went into fallback mode and wasn't even offered an option to set my desktop session to Ubuntu 3D. I didn't need the driver to run Compiz in Ubuntu 11.10, it just ran so smoothly. But in Ubuntu 10.10, everything is so laggy. Should I install the ATI/AMD Proprietary FGLRX Graphics Driver for Ubuntu 10.10 to enable extra effects? Or is there something else wrong with my system? Here is the output of lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:6760] Here is the output of the same command, but in Ubuntu 11.10 (in this case the one which is correct, because I don't have the Sandy Bridge Integrated graphics controller) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] [1002:6760]

  Read the article

• Problem with installing Nvidia display drivers on Ubuntu 13.10

  - by Pascal

  Hello everyone and thank you for taking a look at this topic! I'm currently trying out Ubuntu 13.10 but I keep hitting a wall when it comes to installing a driver. I've tried: sudo apt-get install nvidia-current This resulted in a un-bootable system. The screen just stayed black and the cursor displayed as an 'X'. After that I did had to re-install Ubuntu. The computer I'm using is an Acer-Aspire-V3 with a build in Nvidia geforce GT 630M and also with a Intel HD graphics chip-set (not sure if chip-set is the right word here). "lspci | grep VGA" output: pascal@pascal-Aspire-V3-571G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1) I've searched a bit here and there and found out that it would be wise to mention that this laptop is using (or so I think) Nvidia Optimus, not sure if it will add anything to the subject but at least I'll mention it just to be sure. Now to the questions: Q1 How is this caused and how can I fix it? Q2 What additional information could I provide to help you help me?

  Read the article

• WiFi slow sometimes, reboot helps, how do I debug it?

  - by January

  Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

  Read the article

• Can't configure 5.1 audio with 12.04

  - by xster

  I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

  Read the article

• Ubuntu 12.04 won't shut down - stopping winbind daemon

  - by jan

  My Precise Pangolin sometimes won't shut down - the screen is black with text on it. Mostly last line says something like "stopping winbind deamon" (sometimes also virtualbox, which is above winbind daemon; edit: sometimes the last line says "running unattended updates") and it stays like this for about ten miutes. Then I usually hold the power button for 5s to shut it down. It's very unpredictable - sometimes the computer shuts down without problem and sometimes it hangs. I've tried many ways to shut it down: HW button, panel applet, sudo shutdown -h now, sudo poweroff, sudo halt, etc. even sudo reboot or restart from panel applet have this problem. Sometimes it works ok but every method named hung at least once on the same (damned) line. My specs: FUJITSU SIEMENS LIFEBOOK E8310, Intel Core2 Duo T7300 @ 2.00GHz, 3GB RAM, GPU: Mobile Intel(R) 965 Express Chipset Family Ubuntu 12.04.2 32bit, 3.5.0-41-generic kernel (but it did it on older kernels and 12.04.x systems too). Any ideas what should I try next? Thanks a lot! Jan

  Read the article

• Ubuntu is not detecting my android device

  - by user3514160

  I am new to android. I have just downloaded and installed android sdk. Now when I run the application from eclipse, my device is not getting detected. I have googled and was brought up with this as my solution, but that also didn't worked. Here's the 51-android.rules SUBSYSTEMS=="usb", ATTR{idProduct}=="0bb4", ATTR{idProduct}=="0c03", MODE="0666", GROUP="plugindev", OWNER="<username>" After that I rebooted my laptop, and ran this command: username@laptopname:~/Android/adt-bundle/sdk/platform-tools$ adb devices The output i get is: * daemon not running. starting it now on port 5037 * * daemon started successfully * List of devices attached ???????????? no permissions EDIT crazydeveloper@crazydeveloper:~$ lsusb Bus 002 Device 004: ID 0bb4:0c03 HTC (High Tech Computer Corp.) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b337 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/004/ ls: cannot access /dev/bus/usb/004/: No such file or directory crazydeveloper@crazydeveloper:~$ Edit: 2 After the answer submitted here's the output that i got: crazydeveloper@crazydeveloper:~$ ls -l /dev/bus/usb/002 total 0 crw-rw-r-- 1 root root 189, 128 May 7 09:45 001 crw-rw-r--+ 1 root root 189, 129 May 7 09:45 002 crw-rw-rw- 1 root plugdev 189, 130 May 7 09:48 003 I am using Micromax Canvas 2.2 A114 - Android Version 4.2.2 Please help me. Thanks.

  Read the article

• LiveCD/USB boot issues with Ubuntu 12.04 on blank drive

  - by Richek

  Not sure how common this issue is, or even how badly I may be missing something simple, but I am a first time usuer having some serious problems. Some background: old HDD running Windows 7 developed too many bad sectors and is bricked. I'm attempting to install Ubuntu 12.04 on a fresh 1TB drive by booting from a liveCD USB flash drive. I've not been able to get past the initial menu screen, however, as the process stalls out shortly after selecting an option (both boot from drive and install to drive). I've tried multiple USB drives as well as CDs, modified the boot order, flashed BIOS, and even tried booting with only the flash drive and the keyboard connected with the same results.Typically what I observe is that the OS begins what I think is compliling, listing drivers and components before freezing on one. When the keyboard is plugged in, its the keyboard driver, before I flashed BIOS, it was a BIOS related item, now its an unknown entry. The computer seems to be reading the drive (idicated by USB light flashing or CD drive reving) for roughly 10 minutes with no progress, followed by the drives going quiet. Some spec info: Motherboard: ASUS P5Q Pro, BIOS version 2102 (latest version), Intel chipset CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz help would be appriciated!

  Read the article

• How to get Nvidia graphics working on Sony Z laptop?

  - by projectshave

  I have an older Sony VAIO Z 590 laptop with switchable graphics between Intel and Nvidia GeForce 9300M. It is NOT Optimus. I did a clean install of Ubuntu 12.04. Everything works, but it's using Unity 2D with the Intel drivers. I've tried loading the Nvidia drivers from "Additional Drivers", but it says "this driver is activated but not currently in use". When I run "nvidia-settings", an error window pops up to say "You do not appear to be using the NVIDIA X drivers." "lspci" shows both graphics cards. Let me know if I should add more info. How do I get the Nvidia graphics and Unity 3D working? More info: $ lshw -short -class display H/W path Device Class Description ============================================== /0/100/1/0 display G98 [GeForce 9300M GS] /0/100/2 display Mobile 4 Series Chipset Integrated Graphics C $ glxinfo name of display: :0 Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Xlib: extension "GLX" missing on display ":0". Excerpts from Xorg.0.log: [ 16.373] (II) LoadModule: "glx" [ 16.373] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 16.386] (II) Module glx: vendor="NVIDIA Corporation" [ 16.386] compiled for 4.0.2, module version = 1.0.0 [ 16.386] Module class: X.Org Server Extension [ 16.386] (II) NVIDIA GLX Module 295.49 Tue May 1 00:09:10 PDT 2012 [ 16.608] (II) NVIDIA dlloader X Driver 295.49 Mon Apr 30 23:48:24 PDT 2012 [ 16.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 17.693] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >