Search Results

Search found 4068 results on 163 pages for 'intel gma'.

Page 68/163 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

  • Ubuntu failed to detect monitor and very low resolution?

    - by Hiren
    I tried different versions of Ubuntu from 11.04 to 11.10 beta, but got same problem. My desktop pc configuration is, - intel core i5 2400 - DH67BL Motherboard - Inbuilt motherboard graphics - No extra graphics card attached - Acer-H193HQV 18.5" Monitor - 2GB RAM - 250GB Harddisk Problem : Ubuntu can't detect my monitor and saying it Unknown. Moreover, monitor's original resolution is 1366x768 but in the list of resolution there is only 1024x768 and 800x600 are there.

    Read the article

  • how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

    - by Oleksandr Dudchenko
    I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

    Read the article

  • How to activate subwoofer in Inspiron 17r?

    - by alfC
    I have a Dell Inspiron 17r, after a fresh install of 12.10, the subwoofer seems to be not utilized. No sound comes from it and in the Sound Control Panel the settings appear grayed out (see screenshot). How can I activate the subwoofer? I tried adding the line options snd-hda-intel model=dell in the file /etc/modprobe.d/alsa-base.conf and enable-lfe-remixing = yes default-sample-channels = 3 in the file /etc/pulse/daemon.conf, but still doesn't work.

    Read the article

  • Ubuntu lag when minimizing window

    - by hudadiaz
    Ubuntu(or maybe just Unity) lags whenever I minimize a window when there's no other opened window(others are minimized). I faced this problem after I install Ubuntu Tweak 0.7, Conky, OpenJDK 7, IcedTea 7 (if it does matter) There's no problem to: show and hide windows spread window open and close window I have set window minimize animation as Fade 220ms and Animation Time Step as 1 in CCSM but I honestly don't think this is the problem because when there's other opened window, everything is smooth. Ubuntu 12.04, Dell Inspiron 1525, Intel Core 2 Duo @2.00GHZ, 4GB RAM

    Read the article

  • Change ra0 to wlan0 in ubuntu 10.10

    - by spambas
    I am trying to find a way to change the name of my Ralink interface to the usual wlan0. The application I use is looking for this interface but since we changed our wifi adapter form Intel to ralink we miss the wlan0 because Ralink uses ra0 instead. On all the forums and blogs I read that you need to change that in /etc/sysconfig/network-scripts/ifcfg-ra0. Ubuntu unfortunately does not have a /etc/sysconfig folder.

    Read the article

  • Free E-Book from APress - Platform Embedded Security Technology Revealed

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2014/08/23/free-e-book-from-apress---platform-embedded-security-technology-revealed.aspxAt  http://www.apress.com/9781430265719, APress are providing a free E-Book - Platform Embedded Security Technology Revealed. “Platform Embedded Security Technology Revealed is an in-depth introduction to Intel’s security and management engine, with details on the security features and the steps for configuring and invoking them. It's written for security professionals and researchers; embedded-system engineers; and software engineers and vendors.”

    Read the article

  • VM VirtualBox doesn't allow to enable 64-bit guest on Ubuntu 12.04 and Lenovo G500S

    - by Filip
    I've installed VM VirtualBox v. 4.3.8 on my Ubuntu 12.04 LTS (Lenovo G500S with Intel 1005M processor) and I can't configure any 64-bit guest (nor Windows, neither other OS). Inslalation of Win 8.1 64-bit under 32-bit profile obviously fails... My processor supports VT-x technology, but in my BIOS there is no enable/disable option for VT-x. Is there any way to force VirtualBox to support 64-bit guest ?

    Read the article

  • How do I get wireless working on a Dell Inspiron 510m?

    - by user17449
    Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

    Read the article

  • Columnar Databases

    - by jchang
    Ingres just published a TPC-H benchmark for VectorWise , an analytic database technology employing 1) SIMD processing (Intel SSE 4.2), 2) better memory optimizations to leverage on-chip cache, 3) compression, 4) Column-based storage. Ingres originated as a research project at UC Berkeley (see Wikipedia ) in the 1970s, and has since become a commercially supported, open source database system. Apparently, Ingres project people later founded Sybase. So Ingres in a sense, is the grandfather (or perhap...(read more)

    Read the article

  • Black screen on login page

    - by Sulliwane
    When I startup my Ubuntu 12.04 installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge), I get this black login screen : I also hear the ubuntu login sound "tic toc" but the screen is black, and if I type in some text, only strange characters appears (as you can see on the picture). Do you have any idea ? Thanks. ps : this is an evolution of a previous problem exposed here

    Read the article

  • what's included in a typical computer architecture class? [closed]

    - by sq1020
    Does this description fit what's usually included in a computer architecture class? Computer Organization and Assembly Language An introduction to the hardware organization and assembly language of the Intel processor. Topics include memory hierarchy and design- CPU design- pipelining- addressing modes- subroutine linkage- polled input/output- interrupts- high level language interfacing and macros.

    Read the article

  • link to executable file in ubuntu 11.10 with cairo dock

    - by ragv
    I am using ubuntu 11.10 with cairo dock in an acer aspire with core i3 2nd gen processor with intel graphics. I downloaded a program gingkocad as a tar file, opened the package with archive manager and created a folder for the package contents. To run the program i need to click the executable to run in terminal. Is there a way to create a shortcut to run the executable from an icon in cairo dock ? Please help. ragv

    Read the article

  • Empty tooltips in MATLAB

    - by GriffinPeterson
    I am running MATLAB R2013b. Under Unity, the built-in editor of MATLAB shows empty tooltips, as seen here: http://imgur.com/4VSq6i8 Under xfce the tooltips are showing up just fine. My system: Ubuntu 14.04, Intel i7 4770K. The question has already been posted somewhere else (http://stackoverflow.com/questions/21915939/matlab-code-analyzer-produces-empty-tooltips, http://www.mathworks.com/matlabcentral/answers/116987-empty-tooltips-in-code-analyzer ), but I think this is a Unity-specific problem. Any ideas?

    Read the article

  • Acer Allionone Z5810 Touchscreen Issues 12.04

    - by Johannes
    I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Cannot get Virtualbox to install properly on Ubuntu 12.04

    - by lopac1029
    I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

    Read the article

  • NVidia with Optimus conflicting in Ubuntu 12.04

    - by Humannoise
    i have recently installed Ubuntu 12.04 in a Intel Ivy Bridge with integrated graphics and NVidia GPU with Optimus tech, however i cant manage it to work properly. I have already passed by the solution of bumblebee project, however iam got the following message when try to run anything with nvidia card( e.g. with optirun firefox): [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect. [ERROR]Could not connect to bumblebee daemon - is it running? Since the nvidia card is not working properly, some softwares like Scilab, that make use of X11 system for graphic handling and plotting, wont work too. my bios has no option concerning graphics card and the log of daemon returned: Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ bumblebeed[980]: Module 'nvidia' is not found. Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ kernel: [ 17.943272] init: bumblebeed main process (980) terminated with status 1 Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ kernel: [ 17.943288] init: bumblebeed main process ended, respawning Jul 5 16:10:51 humannoise-W251ESQ-W270ESQ bumblebeed[1026]: Module 'nvidia' is not found. The lspci -nn | grep '\[030[02]\]:' returned: 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) Ok, for the command dpkg -l | grep '^ii' | grep nvidia i got : ii bumblebee-nvidia 3.0-2~preciseppa1 nVidia Optimus support using the proprietary NVIDIA driver ii nvidia-current 302.17-0ubuntu1~precise~xup1 NVIDIA binary Xorg driver, kernel module and VDPAU library ii nvidia-current-updates 295.49-0ubuntu0.1 NVIDIA binary Xorg driver, kernel module and VDPAU library ii nvidia-settings 302.17-0ubuntu1~precise~xup3 Tool of configuring the NVIDIA graphics driver ii nvidia-settings-updates 295.33-0ubuntu1 Tool of configuring the NVIDIA graphics driver After full reinstallation, including the remove of any previous nvidia drive, lsmod | grep -E 'nvidia|nouveau' returned: nvidia 10888310 46 dmesg | grep -C3 -E 'nouveau|NVRM' returned things like: [ 1875.607283] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1875.607289] nvidia 0000:01:00.0: setting latency timer to 64 [ 1875.607293] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 1875.607363] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012 [ 1884.830035] nvidia 0000:01:00.0: PCI INT A disabled [ 1884.832058] bbswitch: disabling discrete graphics [ 1884.832960] bbswitch: Result of Optimus _DSM call: 09000019 Some programs, like Scilab, are now working fine under optirun(e.g. >optirun scilab) call. Thank you.

    Read the article

  • Is Infiniband going to get squeezed by iWARP and external QPI?

    - by andy.grover
    The Inquirer certainly thinks so.However, I'm not so sure it makes sense to compare Infiniband to an as-yet-unannounced optical external QPI. QPI is currently a processor interconnect. CPUs, RAM, and devices connected by it are conceptually part of the same machine -- they run a single OS, for example. They are both "networks" or "fabrics" but they have very different design trade-offs.Another widely-used bus in the system is closer to Infiniband than QPI -- PCI Express. Isn't it more likely that PCIe could take on IB? There are companies already who have solutions that use external PCI Express for cluster interconnect, but these have not gained significant market share. Why would QPI, a technology whose sweet spot is even further from Infiniband's than PCIe, be able to challenge Infiniband? It's hard to speculate without much information, but right now it doesn't seem likely to me.The other prediction made in the article is that Intel's 10GbE iWARP card could squeeze IB on the low end, due to its greater compatibility and lower cost.It's definitely never a good idea to bet against Ethernet when it comes to mass-market, commodity networking. Ethernet will win. 10GbE will win. But, there are now two competing ways to implement the low-latency RDMA Verbs interface on top of Ethernet. iWARP is essentially RDMA over TCP/IP over Ethernet. The new alternative is IBoE (Infiniband over Ethernet, aka RoCEE, aka "Rocky"). This encapsulates the IB packet protocol directly in the Ethernet frame. It loses the layer 3 routability of iWARP, but better maintains software compatibility with existing apps that use IB, and is simpler to implement in both software and hardware. iWARP has a substantial head start, but I believe that IBoE silicon will eventually be cheaper, and more likely to be implemented in commodity Ethernet hardware.I think IBoE is going to take low-end market share from traditional IB, but I think this is a situation IB hardware vendors have no problem accepting. Commoditized IBoE NICs invite greater use of RDMA features, and when higher performance is needed, customers can upgrade to "real" IB, maintaining IB's justification for higher prices. (IB max interconnect speeds have historically been 2-4x higher than Ethernet, and I don't see that changing.)(ObDisclosure: My current employer now sells IB hardware. I previously also worked at Intel. My opinions are my own, duh.)

    Read the article

  • Ubuntu 13.10 installation fault

    - by macphisto1983
    I'm trying to install Ubuntu 13.10 64bit on my notebook, but after a few second the installation quit, i have to take screenshot with my phone, i saw an error: MMIO write of 0x00000000 write fault at 0x418880 [IBUS]![enter image description here][1] My notebook is Asus n56vv with Optimus intel + nvidia gt750m At now I have a working installation of Ubuntu 13.04, I just want to install Ubuntu 13.10, keeping my home folder, I also tried to try ubuntu, but I have the same issue and the system didn't load.

    Read the article

  • ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

    - by Bence Mihalka
    When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

    Read the article

  • Microsoft Dropping Itanium Support

    Microsoft plans to end the support it provides on three of its flagship software products for Intel's Itanium processor....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Looking to trade a 1U HP Proliant DL360 G5 in exchange for a small linux VPS

    - by user597875
    I have a 1U HP Proliant DL360 G5 that I have no place to rack and would like to trade it for a small linux VPS. If interested let me know... Here are the specs of the server: Model: Intel Xeon CPU 5150 @ 2.66GHz, 4MB L2 Cache Processor Speed: 2.7GHz Processor Sockets: 2 Processor Cores per Socket: 2 Logical Processors: 4 8GB of memory 4x72GB 10k SAS drives Manufacturer: HP Model: Proliant DL360 G5 BIOS Version: P58

    Read the article

  • "mcp power or thermal limit exceeded" excessive in messages.log

    - by Stefan Thyberg
    I keep getting "mcp power or thermal limit exceeded" every five seconds while my computer is on, regardless of what it's doing. I googled it and found some Intel patches but I don't really know exactly what they do or how to apply them and I also don't want to patch my kernel with these random bits of code from some newsgroup. Can anyone shed some light on what exactly is going on and what the right fix is in this case? Am I better off just waiting for a kernel patch?

    Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >