Search Results

Search found 19382 results on 776 pages for 'multiple'.

Page 64/776 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Multiple VLAN on one switch port

  - by Macropus

  I have a HP ProCurve 1810G-8 which I currently use as a normal switch between 3 servers and a firewall. 2 of the servers are ESXi hosts, and one is a Nexentastor box with 2 iSCSI target LUNs. As the iSCSI traffic is on the same LAN as all other traffic, I would like to switch this to use a SAN for iSCSI traffic and the LAN for all other traffic. The Nexentastor box only has 2 NICs, and as such, with a physical arrangement, I presume that one must be plugged into the SAN VLAN and one on the LAN VLAN ports of the switch. Is there a way to have multiple VLANs over the same port? e.g. the Nexentsator box has 2 NICs, both plugged into the switch, both ports with access to both of the VLANs?

  Read the article

• Multiple IPs on Juniper SRX100 Untrust Port

  - by Will

  I am having trouble getting multiple IP addresses on the untrust port. I have tried a few different methods, but can't seem to get it to work. Does anyone have a good tutorial that is not easily found or if possible can type up the steps? I don't mind trying to do it through ssh, but would prefer web interface. Thank you ++++++++++++ Feb 1 fe-0/0/0 { unit 0 { family inet { dhcp { update-server; } } } } routing-options { static { route 0.0.0.0/0 next-hop 96.11.173.81; } } Right now it's setup to receive settings from 'cable modem' through dhcp, but I think it's only getting one IP.

  Read the article

• Excel scatter chart with multiple date ranges

  - by Abiel

  I have multiple blocks of time series data on an Excel sheet, with each block having its own set of dates. For example, I might have dates in column A, values in column B, and then dates in column D and values in column E. The values in B go with the dates in A, and the values in E go with the dates in D. The dates in A and D may not be the same. I would like to create a scatter chart with a time category axis that is the union of my two input date ranges in columns A and D. If I select all the data and then go insert chart (in Excel 2010), Excel treats only column A as the X axis, and looks at D as just another set of values. I can get Excel to do what I want by first just charting columns A and B, then selecting D and E and copy-pasting onto the chart. However, I would like to avoid this two-step procedure if possible.

  Read the article

• Setting Sql server security rights for multiple situations

  - by DanDan

  We have an application which uses an instance of Sql Server locally for its backend storage. The administrator windows login has had its sysadmin right revoked, and instead two sql logins have been created; one for the application with a secret password and one read only login we let users view the raw data with. This was working fine until we moved on FileStreams, which requires intergrated windows authentication. So now the sql server logins must be replaced. As a result, I am now reviewing all of our logins but I am not sure how it is possible. It seems that the application needs full read/write access, yet I still need to lock down writing to the tables so the user cannot login into the database and delete data randomly. Does anyone have any tips for setting multiple levels of security using intergrated windows logins, or can you direct me to any further reading? Thanks.

  Read the article

• Vim's relativenumber setting and multiple buffers

  - by connrs

  I like the relative number setting. I'm refactoring code at the moment (translation: explodicating 5 year old terrible methods and replacing them with nice code) and I find it useful to have the setting active on files as I open them I frequently either open multiple buffers or use a client/server vim to contain all my open buffers/files and have noticed that the relative number only seems to apply to the first buffer (and not the remaining buffers when I have set rnu in my .vimrc file.) Is it expected behaviour for rnu to only initially apply to the first buffer until you manually set it?

  Read the article

• Multiple ServerRoot directives in single apache

  - by fip

  i came across a apache httpd 2.2 configuration recently in which multiple ServerRoot-directives were defined, each followed by individual prefork Settings. Sort of like this: ServerRoot root1 <IfModule prefork.c> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> [vhost-configs] ServerRoot root2 <IfModule prefork.c> StartServers 10 MinSpareServers 10 MaxSpareServers 20 MaxClients 250 MaxRequestsPerChild 0 </IfModule> [vhost-configs] In my understanding these are global settings one overriding the other. But is that true and is it still true with the second ServerRoot directive between the prefork blocks? Thank you in advance EDIT They are not in different conditional blocks and both server roots are used in that way that files with relative paths to both are correctly included. I just wondered if a <ServerRoot> would initiate a new scope in which all global statements would not override the configuration of previous ones.

  Read the article

• Running make for Nginx throws a “multiple target patterns” error

  - by Justin Meltzer

  When I run make inside my installed nginx directory I get the output: make -f objs/Makefile make[1]: Entering directory `/home/ec2-user/nginx/nginx-1.2.4' objs/Makefile:110: *** multiple target patterns. Stop. make[1]: Leaving directory `/home/ec2-user/nginx/nginx-1.2.4' make: * [build] Error 2 I am on an Amazon Linux AMI. The steps I took from the beginning was wget /path/to/nginx/tarball tar xvf nginx-1.2.4.tar.gz cd nginx-1.2.4 ./configure --prefix=/nginx --a-bunch-of-other-options Then I ran make. Also I installed make by running sudo yum install make Please let me know if there's any other information I should be providing.

  Read the article

• Creating Multiple Users on Single PHP-FPM Pool

  - by Vince Kronlein

  Have PHP-FPM/FastCGI up and running on my cPanel/WHM server but I'd like have it allow for multiple users off of a single pool. Getting all vhosts to run off a single pool is simple by adding this to the Apache include editor under Global Post Vhost: <IfModule mod_fastcgi.c> FastCGIExternalServer /usr/local/sbin/php-fpm -host 127.0.0.1:9000 AddHandler php-fastcgi .php Action php-fastcgi /usr/local/sbin/php-fpm.fcgi ScriptAlias /usr/local/spin/php-fpm.fcgi /usr/local/sbin/php-fpm <Directory /usr/local/sbin> Options ExecCGI FollowSymLinks SetHandler fastcgi-script Order allow,deny Allow from all </Directory> </IfModule> But I'd like to find a way to implement php running under the user, but sharing the pool. I manage and control all the domains that run under the pool so I'm not concerned about security of files per account, I just need to make sure all scripting can be executed by the user who owns the files, instead of needing to change file permissions for each account, or having to create tons of vhost include files.

  Read the article

• Configuring multiple domain in nginx in one file

  - by user22695

  I am still newbie configuring nginx. Is it posibble to configure multiple domain in one file and they share mostly the same config? For example I want to configure two domains that based from one app and one domain need basic auth, the other doesn't. I would like to do something like this, but I think this does not work: sites-enabled/mysite server { listen 127.0.0.1:80 default_server; server_name www.mysite.com; include sharedconf.conf; } server { listen 127.0.0.1:80; server_name www.mysite.co.jp; auth_basic "restricted"; auth_basic_user_file /etc/nginx.htpasswd; include sharedconf.conf; } sharedconf.conf location / { proxy_pass_header Server; #... bunch of config line ... }

  Read the article

• Displays tabs in Firefox 3.6 across multiple rows?

  - by overtherainbow

  Hello, After upgrading to Firefox 3.6, I noticed that there no longer seems to be a way to have tabs all displayed in several rows when there are too many to fit in the window: http://www.ghacks.net/wp-content/uploads/2008/08/firefox_tabs_multiple_rows-500x179.jpg I find it very inconvenient to have to click on the down arrow at the far-right side to go through the list of open tabs. The TabMixPlus add-on is incompatible with ReloadEvery 3.6.2, so that's not a good solution either. Does someone know if it's possible to either configure FireFox 3.6 to go back to the previous way of displaying multiple tabs, or if there's an add-on that's compatible with ReloadEvery that would do the trick? Thank you.

  Read the article

• Does anyone using godaddy shared windows webhosting, have multiple websites on it and faced this pro

  - by Amr ElGarhy

  I have multiple website on the same shared hosting on godaddy server, its Deluxe Hosting - Windows plan. I asked before a question about this: http://serverfault.com/questions/13906/how-to-fix-subfolders-iis7-functionality But i feel that no one is facing this problem except me, so i want to know what i am doing wrong or if someone had the same problem please tell me. all my website are in subfolders from the root folder, the problem that all links are showing like this: www.example.com/example/...., www.anotherwebsite.com/anotherwebsite/.... such as this http://amrelgarhy.com/ Means the folder name is showing in the URL, i did all what i can and discussed with godaddy a lot, but they always tell that its a IIS7 problem. Did you face this problem before or know a solution for?

  Read the article

• Configuring Apache for multiple clients

  - by Chris_K

  Last week I had a question here about suexec / suphp but I tried to accomplish too much. I'm going to narrow the scope a bit and try again. I'd like to configure a LAMP server to host multiple clients. I'd like it to seem (from the client's viewpoint) just like any other shared hosting environment. Web sites in their home directory, no need to muck around with file ownerships to get pages served, etc. It would seem that a configuration that involves suexec and suphp is the way to go(?) I'm specifically looking for a current/modern guide on how to accomplish this (I'll be using CentOS if it matters) and I'm afraid I need more than a link to Apache docs. Are there any good How-To's out there? The few I've found have been pretty out of date, but it is quite possible my search was weak.

  Read the article

• Using MythTV to Stream Satellite Signal to multiple users

  - by Ammar

  I'm planning on setting up a small media center to achieve the following: I have multiple users who want to watch satellite channels I want them to be able to change the channel remotely I'm going to buy an external DVB to capture the signal Use some software to stream the channel that is selected I want to have 2 different channels at the same time, I assume I will need two DVB cards Users use VLC or Windows Media Player or whatever to view the channels How can I achieve this? I heard MythTV can do it? I tried to do some research I couldn't find enough information. Note: There's no copyright issue here. I'm streaming Free-To-Air (FTA) channels.

  Read the article

• How to spawn-fcgi multiple fcgi processes ?

  - by Shrinath

  We have nginx installed and would like to spawn-fcgi multiple ".fcgi" files. The programs were written in C. How do we spawn all the files at one go ? Edit This is the scenario : I have 3 different programs to serve. Lets say, I've search results from google, yahoo, bing. I want to show 3 columns which host results of above providers. I have 3 fcgi scripts, one for each provider. How do you suggest I put all 3 into action ?

  Read the article

• Configure Courier IMAP to deliver mail to multiple hostnames

  - by vy32

  I have a courier IMAP server running on a private server at dreamhost. The private server's hostname is psxxxx.dreamhostps.com. I also have CNAME for the private server, call it mydomain.com. I want to send email to [email protected] and have it delivered to [email protected]. Right now the Courer server on the private server is bouncing the mail. On other mail servers there is a file into which you put all of the names that the host responds to. The names are all synonyms for the host's name, so user@ are equivillent. How do I configure Courer to treat multiple hostnames as synonyms for its host name? Thank you.

  Read the article

• Multiple URLs on one domain in IIS 6 [closed]

  - by TGnat

  Possible Duplicate: How to Host Multiple Domains / Web Sites on one IIS6 Server I'm a developer and only know the basics of IIS administration. I want to give each of my clients a personalized URL to access my web site. I have mySite.com and I would like to allow client A to acess the site via A.mySite.com and client B to use B.mySite.com. These would all point the the mySite.com domain with the same ip address. Can this be done in IIS? Do I have to register new domains for each client? Are there other ways to accomplish the same thing?

  Read the article

• Merging multiple versions of same excel spreadsheet

  - by GrinReaper

  So here's the situation: I have multiple versions of the same spreadsheet-- each one has the exact same row and column labels. The difference between any two given spreadsheets is that data in one spreadsheet shouldn't be in the other (but sometimes it might.) Is there anyway to merge all of them into a "master copy" (or just a blank version) of the spreadsheet? (basically, using the data from various versions of that worksheet to fill out the main one) Copy-pasting is extremely tedious, and doesn't allow me to copy blocks of rows IF the row numbering is non-contiguous. (For example, Rows 1, 2, 3, 6 are in a block, but row 4 and 5 just don't exist.) Ideas? Googling hasn't turned up anything that seemed directly relevant to this problem.

  Read the article

• How to clone and deploy multiple machines?

  - by Mimi

  Hi, See what I wanna do is basically make bootable clones or disc images or whatever(let's call it "stuff" for now ) and store many of them in a single big HDD. Then, I wanna use that big HDD and the "stuff" in it to be able to deploy new machines without the hassle of reinstalling Windows and whatnot(i.e. I do not want to restore nor simply clone a same machine, I literally want to use clones to save time during machine set up). Obviously I'd deploy the "stuff" onto an HDD going into a machine that I know the hardware of to avoid driver issues and whatnot. I alos have enough Windows keys to deal with the multiple activations. I tried using Acronis True Image but it doesn't seem to do what I want(unless idk how to use it properly). Any advice is welcome thanks :)

  Read the article

• Multiple CD writer taking long to burn

  - by Mirage

  I have installed 6 DVD writers in Tower case. I am using Alcohol Software to burn multiple CDS. I have seen that about 4 dvd/cd writer finish recording early but some take long time finish and their speed is around 7x. Its not that those are the only writers doing that, some times other writer write slowly. But there are always 1 or 2 writer which takes about 25 min to write the 700Mb cd and some finish in 5 mins Why is that. All writers can write upto 40px speed. Which thing determines the speed

  Read the article

• Sendmail - preventing aliased users from receiving multiple copies of the same email

  - by MikeQ

  Is there any way to prevent a user from receiving multiple copies of the same email if an email is sent to both an alias for the user as well as the user themselves? For example, suppose bob.smith is a included in the alias list for developers (@company.com) If I send the email to both the user and an alias for the user: To: [email protected], [email protected] ... is there any way to prevent user Bob from receiving the same email two times? EDIT: I've observed that if Bob is a member of two different alias groups, and I send an email just to those two groups (not the user directly), sendmail correctly expands the groups and removes the duplicate. The behavior I want to fix occurs when you send directly to the user AND a group they belong to.

  Read the article

• Running Multiple Instances of Firefox

  - by Aaron Bush

  I am running SysInternal's Desktops 1.02 and FireFox 3.6.2. I have noticed that while I can have IE8 open in multiple Virtual Desktops, you can not Firefox. If you try you get the error message: Firefox is already running, but is not responding. To open a new window, you must close the existing FireFox process, or restart your system. I did a little digging around to work around this and came up with creating a second profile via the Firefox profile manager (accessed by starting FF with the "-p" switch). This unfortunately created a new problem which is my add-ons (of which I use many) do not stay synchronized between profiles. Is there a better approach here?

  Read the article

• multiple file systems for mysql

  - by RainDoctor

  Does mysql support multiple file systems for a single database with most of the tables being on MyISAM? Context: we have a 1.5TB mysql database, which is increasing at the rate of 200GB per month. The storage is directly attached, whose slots are almost full. I can add another DAS, and increase the file system. But resizing volume, resizing file system, etc are getting messy. Is there a concept of "tablespace, datafile" (like in oracle) in MySql world? Or how you guys manage mysql db with these kind of constraints?

  Read the article

• Different background color for multiple filetypes in vim

  - by puk

  Is it possible to have different background colors in vim (ie. one light, one dark) when dealing with files with multiple filetypes (ie. :set ft=html.php)? In PHP code with HTML embedded, it can be difficult to see one single PHP statement amongst dozens of HTML lines, see below. I'll settle for anything, be it different bg color, a marker in the margin, a second left margin (one vim plugin does this for marks), maybe highlighting the <?php tag for example (although that's less than ideal) EDIT: I don't think this is possible at the syntax level as the syntax appears to use a limited number of elements (String, Function, Identifier...). This is no doubt to allow for the easy integration with colorschemes. SyntaxAttr is a good plugin to demonstrate this. Put it over any part of the code and it will tell you what syntax group it belongs to.

  Read the article

• windows 7 goes crazy after multiple rdp sessions

  - by rphilli5

  On several different windows 7 machines after using multiple rdp sessions, the local computer begins to act like a function key is locked on. Windows will start opening and closing windows as I type and only a few of the characters will show up normally. The solution to get rid of this issue is to depress the windows key and than num lock, to return to normal keyboard operation. A reboot will also fix the issue. Does anyone know what causes this and how to prevent it from occurring in the first place?

  Read the article

• USB-Sticks and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >