Search Results

Search found 5457 results on 219 pages for 'necessary'.

Page 64/219 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Establishing WebLogic Server HTTPS Trust of IIS Using a Microsoft Local Certificate Authority

  - by user647124

  Everyone agrees that self-signed and demo certificates for SSL and HTTPS should never be used in production and preferred not to be used elsewhere. Most self-signed and demo certificates are provided by vendors with the intention that they are used only to integrate within the same environment. In a vendor’s perfect world all application servers in a given enterprise are from the same vendor, which makes this lack of interoperability in a non-production environment an advantage. For us working in the real world, where not only do we not use a single vendor everywhere but have to make do with self-signed certificates for all but production, testing HTTPS between an IIS ASP.NET service provider and a WebLogic J2EE consumer application can be very frustrating to set up. It was for me, especially having found many blogs and discussion threads where various solutions were described but did not quite work and were all mostly similar but just a little bit different. To save both you and my future (who always seems to forget the hardest-won lessons) all of the pain and suffering, I am recording the steps that finally worked here for reference and sanity. How You Know You Need This The first cold clutches of dread that tells you it is going to be a long day is when you attempt to a WSDL published by IIS in WebLogic over HTTPS and you see the following: <Jul 30, 2012 2:51:31 PM EDT> <Warning> <Security> <BEA-090477> <Certificate chain received from myserver.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure.> weblogic.wsee.wsdl.WsdlException: Failed to read wsdl file from url due to -- javax.net.ssl.SSLKeyException: [Security:090477]Certificate chain received from myserver02.mydomain.com - 10.555.55.123 was not trusted causing SSL handshake failure. The above is what started a three day sojourn into searching for a solution. Even people who had solved it before would tell me how they did, and then shrug when I demonstrated that the steps did not end in the success they claimed I would experience. Rather than torture you with the details of everything I did that did not work, here is what finally did work. Export the Certificates from IE First, take the offending WSDL URL and paste it into IE (if you have an internal Microsoft CA, you have IE, even if you don’t use it in favor of some other browser). To state the semi-obvious, if you received the error above there is a certificate configured for the IIS host of the service and the SSL port has been configured properly. Otherwise there would be a different error, usually about the site not found or connection failed. Once the WSDL loads, to the right of the address bar there will be a lock icon. Click the lock and then click View Certificates in the resulting dialog (if you do not have a lock icon but do have a Certificate Error message, see http://support.microsoft.com/kb/931850 for steps to install the certificate then you can continue from the point of finding the lock icon). Figure 1: View Certificates in IE Next, select the Details tab in the resulting dialog Figure 2: Use Certificate Details to Export Certificate Click Copy to File, then Next, then select the Base-64 encoded option for the format Figure 3: Select the Base-64 encoded option for the format For the sake of simplicity, I choose to save this to the root of the WebLogic domain. It will work from anywhere, but later you will need to type in the full path rather than just the certificate name if you save it elsewhere. Figure 4: Browse to Save Location Figure 5: Save the Certificate to the Domain Root for Convenience This is the point where I ran into some confusion. Some articles mentioned exporting the entire chain of certificates. This supposedly works for some types of certificates, or if you have a few other tools and the time to learn them. For the SSL experts out there, they already have these tools, know how to use them well, and should not be wasting their time reading this article meant for folks who just want to get things wired up and back to unit testing and development. For the rest of us, the easiest way to make sure things will work is to just export all the links in the chain individually and let WebLogic Server worry about re-assembling them into a chain (which it does quite nicely). While perhaps not the most elegant solution, the multi-step process is easy to repeat and uses only tools that are immediately available and require no learning curve. So… Next, go to Tools then Internet Options then the Content tab and click Certificates. Go to the Trust Root Certificate Authorities tab and find the certificate root for your Microsoft CA cert (look for the Issuer of the certificate you exported earlier). Figure 6: Trusted Root Certification Authorities Tab Export this one the same way as before, with a different name Figure 7: Use a Unique Name for Each Certificate Repeat this once more for the Intermediate Certificate tab. Import the Certificates to the WebLogic Domain Now, open an command prompt, navigate to [WEBLOGIC_DOMAIN_ROOT]\bin and execute setDomainEnv. You should then be in the root of the domain. If not, CD to the domain root. Assuming you saved the certificate in the domain root, execute the following: keytool -importcert -alias [ALIAS-1] -trustcacerts -file [FULL PATH TO .CER 1] -keystore truststore.jks -storepass [PASSWORD] An example with the variables filled in is: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password After several lines out output you will be prompted with: Trust this certificate? [no]: The correct answer is ‘yes’ (minus the quotes, of course). You’ll you know you were successful if the response is: Certificate was added to keystore If not, check your typing, as that is generally the source of an error at this point. Repeat this for all three of the certificates you exported, changing the [ALIAS-1] and [FULL PATH TO .CER 1] value each time. For example: keytool -importcert -alias IIS-1 -trustcacerts -file microsftcert.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-2 -trustcacerts -file microsftcertRoot.cer -keystore truststore.jks -storepass password keytool -importcert -alias IIS-3 -trustcacerts -file microsftcertIntermediate.cer -keystore truststore.jks -storepass password In the above we created a new JKS key store. You can re-use an existing one by changing the name of the JKS file to one you already have and change the password to the one that matches that JKS file. For the DemoTrust.jks  that is included with WebLogic the password is DemoTrustKeyStorePassPhrase. An example here would be: keytool -importcert -alias IIS-1 -trustcacerts -file microsoft.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftRoot.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase keytool -importcert -alias IIS-2 -trustcacerts -file microsoftInter.cer -keystore DemoTrust.jks -storepass DemoTrustKeyStorePassPhrase Whichever keystore you use, you can check your work with: keytool -list -keystore truststore.jks -storepass password Where “truststore.jks” and “password” can be replaced appropriately if necessary. The output will look something like this: Figure 8: Output from keytool -list -keystore Update the WebLogic Keystore Configuration If you used an existing keystore rather than creating a new one, you can restart your WebLogic Server and skip the rest of this section. For those of us who created a new one because that is the instructions we found online… Next, we need to tell WebLogic to use the JKS file (truststore.jks) we just created. Log in to the WebLogic Server Administration Console and navigate to Servers > AdminServer > Configuration > Keystores. Scroll down to “Custom Trust Keystore:” and change the value to “truststore.jks” and the value of “Custom Trust Keystore Passphrase:” and “Confirm Custom Trust Keystore Passphrase:” to the password you used when earlier, then save your changes. You will get a nice message similar to the following: Figure 9: To Be Safe, Restart Anyways The “No restarts are necessary” is somewhat of an exaggeration. If you want to be able to use the keystore you may need restart the server(s). To save myself aggravation, I always do. Your mileage may vary. Conclusion That should get you there. If there are some erroneous steps included for your situation in particular, I will offer up a semi-apology as the process described above does not take long at all and if there is one step that could be dropped from it, is still much faster than trying to figure this out from other sources.

  Read the article

• C# Performance Pitfall – Interop Scenarios Change the Rules

  - by Reed

  C# and .NET, overall, really do have fantastic performance in my opinion.  That being said, the performance characteristics dramatically differ from native programming, and take some relearning if you’re used to doing performance optimization in most other languages, especially C, C++, and similar.  However, there are times when revisiting tricks learned in native code play a critical role in performance optimization in C#. I recently ran across a nasty scenario that illustrated to me how dangerous following any fixed rules for optimization can be… The rules in C# when optimizing code are very different than C or C++.  Often, they’re exactly backwards.  For example, in C and C++, lifting a variable out of loops in order to avoid memory allocations often can have huge advantages.  If some function within a call graph is allocating memory dynamically, and that gets called in a loop, it can dramatically slow down a routine. This can be a tricky bottleneck to track down, even with a profiler.  Looking at the memory allocation graph is usually the key for spotting this routine, as it’s often “hidden” deep in call graph.  For example, while optimizing some of my scientific routines, I ran into a situation where I had a loop similar to: for (i=0; i<numberToProcess; ++i) { // Do some work ProcessElement(element[i]); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This loop was at a fairly high level in the call graph, and often could take many hours to complete, depending on the input data.  As such, any performance optimization we could achieve would be greatly appreciated by our users. After a fair bit of profiling, I noticed that a couple of function calls down the call graph (inside of ProcessElement), there was some code that effectively was doing: // Allocate some data required DataStructure* data = new DataStructure(num); // Call into a subroutine that passed around and manipulated this data highly CallSubroutine(data); // Read and use some values from here double values = data->Foo; // Cleanup delete data; // ... return bar; Normally, if “DataStructure” was a simple data type, I could just allocate it on the stack.  However, it’s constructor, internally, allocated it’s own memory using new, so this wouldn’t eliminate the problem.  In this case, however, I could change the call signatures to allow the pointer to the data structure to be passed into ProcessElement and through the call graph, allowing the inner routine to reuse the same “data” memory instead of allocating.  At the highest level, my code effectively changed to something like: DataStructure* data = new DataStructure(numberToProcess); for (i=0; i<numberToProcess; ++i) { // Do some work ProcessElement(element[i], data); } delete data; Granted, this dramatically reduced the maintainability of the code, so it wasn’t something I wanted to do unless there was a significant benefit.  In this case, after profiling the new version, I found that it increased the overall performance dramatically – my main test case went from 35 minutes runtime down to 21 minutes.  This was such a significant improvement, I felt it was worth the reduction in maintainability. In C and C++, it’s generally a good idea (for performance) to: Reduce the number of memory allocations as much as possible, Use fewer, larger memory allocations instead of many smaller ones, and Allocate as high up the call stack as possible, and reuse memory I’ve seen many people try to make similar optimizations in C# code.  For good or bad, this is typically not a good idea.  The garbage collector in .NET completely changes the rules here. In C#, reallocating memory in a loop is not always a bad idea.  In this scenario, for example, I may have been much better off leaving the original code alone.  The reason for this is the garbage collector.  The GC in .NET is incredibly effective, and leaving the allocation deep inside the call stack has some huge advantages.  First and foremost, it tends to make the code more maintainable – passing around object references tends to couple the methods together more than necessary, and overall increase the complexity of the code.  This is something that should be avoided unless there is a significant reason.  Second, (unlike C and C++) memory allocation of a single object in C# is normally cheap and fast.  Finally, and most critically, there is a large advantage to having short lived objects.  If you lift a variable out of the loop and reuse the memory, its much more likely that object will get promoted to Gen1 (or worse, Gen2).  This can cause expensive compaction operations to be required, and also lead to (at least temporary) memory fragmentation as well as more costly collections later. As such, I’ve found that it’s often (though not always) faster to leave memory allocations where you’d naturally place them – deep inside of the call graph, inside of the loops.  This causes the objects to stay very short lived, which in turn increases the efficiency of the garbage collector, and can dramatically improve the overall performance of the routine as a whole. In C#, I tend to: Keep variable declarations in the tightest scope possible Declare and allocate objects at usage While this tends to cause some of the same goals (reducing unnecessary allocations, etc), the goal here is a bit different – it’s about keeping the objects rooted for as little time as possible in order to (attempt) to keep them completely in Gen0, or worst case, Gen1.  It also has the huge advantage of keeping the code very maintainable – objects are used and “released” as soon as possible, which keeps the code very clean.  It does, however, often have the side effect of causing more allocations to occur, but keeping the objects rooted for a much shorter time. Now – nowhere here am I suggesting that these rules are hard, fast rules that are always true.  That being said, my time spent optimizing over the years encourages me to naturally write code that follows the above guidelines, then profile and adjust as necessary.  In my current project, however, I ran across one of those nasty little pitfalls that’s something to keep in mind – interop changes the rules. In this case, I was dealing with an API that, internally, used some COM objects.  In this case, these COM objects were leading to native allocations (most likely C++) occurring in a loop deep in my call graph.  Even though I was writing nice, clean managed code, the normal managed code rules for performance no longer apply.  After profiling to find the bottleneck in my code, I realized that my inner loop, a innocuous looking block of C# code, was effectively causing a set of native memory allocations in every iteration.  This required going back to a “native programming” mindset for optimization.  Lifting these variables and reusing them took a 1:10 routine down to 0:20 – again, a very worthwhile improvement. Overall, the lessons here are: Always profile if you suspect a performance problem – don’t assume any rule is correct, or any code is efficient just because it looks like it should be Remember to check memory allocations when profiling, not just CPU cycles Interop scenarios often cause managed code to act very differently than “normal” managed code. Native code can be hidden very cleverly inside of managed wrappers

  Read the article

• Configuring Oracle HTTP Server 12c for WebLogic Server Domain

  - by Emin Askerov

  Oracle HTTP Server (OHS) 12c 12.1.2 which was released in July 2013 as a part of Oracle Web Tier 12c is the web server component of Oracle Fusion Middleware. In essence this is Apache HTTP Server 2.2.22 (with critical bug fixes from higher versions) which includes modules developed specifically by Oracle. It provides a listener functionality for Oracle WebLogic Server and the framework for hosting static pages, dynamic pages, and applications over the Web. OHS can be easily managed by Weblogic Management Framework, a set of tools which provides administrative capabilities (start, stop, lifecycle operations, etc.) for Oracle Fusion Middleware products. In other words all tools which are familiar to us (Node Manager, WLST, Administration Console, Fusion Middleware Control etc.) presented as a part of Weblogic Management Framework and using for managing Java and System Components both for Weblogic Server and Standalone Domain types. You can familiarize yourself with these terms using related documentation: 1. Introduction to Oracle HTTP Server: http://docs.oracle.com/middleware/1212/webtier/index.html 2. Weblogic Management Framework: http://docs.oracle.com/middleware/1212/core/ASCON/terminology.htm#ASCON11260 In the given post I would like to cover rather simple use case how to configure OHS as web proxy in Weblogic Cluster environment. For example, we have existing Weblogic Domain where some managed servers have been joined to cluster and host business applications. We need to configure web proxy component which will act as entry point, load balancer for our cluster for user requests. Of course, we could install old good Apache HTTP Server and configure mod_wl plugin. However this solution not optimal from manageability perspective: we need to install Apache, install additional plugin then configure it by editing configuration file which is not really convenient for FMW Administrators and often increase time of performing of simple administrative task. Alternatively, we could use OHS as System Component within Weblogic Domain and use full power of Weblogic Management Framework in order to configure, manage and monitor it! I like this idea! What about you? I hope after reading this post you will agree with me. First of all it is necessary to download OHS binaries. You can use this link for downloading: http://www.oracle.com/technetwork/java/webtier/downloads/index2-303202.html As we will use Fusion Middleware Control for managing OHS instances it is necessary to extend your domain with Enterprise Manager and Oracle ADF and JRF templates. This is not topic for focusing in this post, but you could get more information from documentation or one of my previous posts: http://docs.oracle.com/middleware/1212/wls/WLDTR/fmw_templates.htm#sthref64 https://blogs.oracle.com/imc/entry/the_specifics_of_adf_12c Note: you should have properly configured Node Manager utility for managing OHS instances Let’s consider configuration process step by step: 1. Shut down all Weblogic instances of existing domain including Admin Server; 2. Install Oracle HTTP Server. You should use your Fusion Middleware Home Path (e.g. /u01/Oracle/FMW12) for Installation Location and select Colocated HTTP Server option as Installation Type. I will not focus on this topic in this post. All information related to OHS installation you could find here: http://docs.oracle.com/middleware/1212/webtier/WTINS/install_gui.htm#i1082009 3. Next we need to extend our existing domain with OHS component. In order to do this you should do the following: a. Run Fusion Middleware Configuration Wizard (ORACLE_HOME/oracle_common/common/bin/config.sh); b. On the step 1 select Update an existing domain option and point your Fusion Middleware Home Path; c. On the step 2 check Oracle HTTP Server, Oracle Enterprise Manager Plugin for WEBTIER templates; d. Go through other steps without any changes and finish configuration process. 4. Start Admin Server and all managed servers related to your cluster 5. Log in to Enterprise Manager FMW Control using http://<hostname>:<port>/em URL 6. Now we will create OHS instance within our Weblogic Domain Infrastructure. Navigate to Weblogic Domain -> Administration -> Create/Delete OHS menu item; 7. Enter to edit mode, clicking Changes -> Lock&Edit menu item; 8. Create new OHS instance clicking Create button; 9. Define Instance Name (e.g. DevOSH) and Machine parameters; 10. Now we need to define listen port. By default OHS will use 7777 port number for income HTTP requests. We could change it to any free port number we would like to use. In order to do it, right click on our created OHS instance (left hand panel) and navigate to Administration -> Port Configuration; 11. Click on record with port number 7777 and then click Edit button; 12. Change port number value (in our case this will be 8080) and then click OK button; 13. Now we need to edit mod_wl_ohs configuration in order to enable OHS to act as proxy for WebLogic Server Instances/Cluster; 14. In order to do it right click on our created OHS instance (left panel) and navigate to Administration -> mod_wl_ohs Configuration; a. In Weblogic Cluster you should enter cluster address (define <host:port> for all managed servers which participated in cluster), e.g: 192.168.56.2:7004,192.168.56.2:7005 b. Define Weblogic Port parameter at which the Oracle WebLogic Server host is listening for connection requests from the module (or from other servers); c. Check Dynamic Server List option. This will dynamically update cluster list for every request; d. In the Location table define list of endpoint locations which you would like to process. In order to do this click Add Row button and define Location, Weblogic Cluster, Path Trim and Path Prefix parameters (if required); e. Click Apply button in order to save changes. 15. Activate changes clicking Changes ? Activate Changes menu item; 16. Finally we will start configured OHS instance. Right click on OHS instance tree item under Web Tier folder, select Control -> Start Up menu item; 17. Ensure that OHS instance up and running and then test your environment. Run deployed application to your Weblogic Cluster accessing via OHS web proxy; Normal 0 false false false RU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• SQL Server Table Polling by Multiple Subscribers

  - by Daniel Hester

  Background Designing Stored Procedures that are safe for multiple subscribers (to call simultaneously) can be challenging.  For example let’s say that you want multiple worker processes to poll a shared work queue that’s encapsulated as a SQL Table. This is a common scenario and through experience you’ll find that you want to use Table Hints to prevent unwanted locking when performing simultaneous queries on the same table. There are three table hints to consider: NOLOCK, READPAST and UPDLOCK. Both NOLOCK and READPAST table hints allow you to SELECT from a table without placing a LOCK on that table. However, SELECTs with the READPAST hint will ignore any records that are locked due to being updated/inserted (or otherwise “dirty”), whereas a SELECT with NOLOCK ignores all locks including dirty reads. For the initial update of the flag (that marks the record as available for subscription) I don’t use the NOLOCK Table Hint because I want to be sensitive to the “active” records in the table and I want to exclude them.  I use an Update Lock (UPDLOCK) in conjunction with a WHERE clause that uses a sub-select with a READPAST Table Hint in order to explicitly lock the records I’m updating (UPDLOCK) but not place a lock on the table when selecting the records that I’m going to update (READPAST). UPDATES should be allowed to lock the rows affected because we’re probably changing a flag on a record so that it is not included in a SELECT from another subscriber. On the UPDATE statement we should explicitly use the UPDLOCK to guard against lock escalation. A SELECT to check for the next record(s) to process can result in a shared read lock being held by more than one subscriber polling the shared work queue (SQL table). It is expected that more than one worker process (or server) might try to process the same new record(s) at the same time. When each process then tries to obtain the update lock, none of them can because another process has a shared read lock in place. Thus without the UPDLOCK hint the result would be a lock escalation deadlock; however with the UPDLOCK hint this condition is mitigated against. Note that using the READPAST table hint requires that you also set the ISOLATION LEVEL of the transaction to be READ COMMITTED (rather than the default of SERIALIZABLE). Guidance In the Stored Procedure that returns records to the multiple subscribers: Perform the UPDATE first. Change the flag that makes the record available to subscribers.  Additionally, you may want to update a LastUpdated datetime field in order to be able to check for records that “got stuck” in an intermediate state or for other auditing purposes. In the UPDATE statement use the (UPDLOCK) Table Hint on the UPDATE statement to prevent lock escalation. In the UPDATE statement also use a WHERE Clause that uses a sub-select with a (READPAST) Table Hint to select the records that you’re going to update. In the UPDATE statement use the OUTPUT clause in conjunction with a Temporary Table to isolate the record(s) that you’ve just updated and intend to return to the subscriber. This is the fastest way to update the record(s) and to get the records’ identifiers within the same operation. Finally do a set-based SELECT on the main Table (using the Temporary Table to identify the records in the set) with either a READPAST or NOLOCK table hint.  Use NOLOCK if there are other processes (besides the multiple subscribers) that might be changing the data that you want to return to the multiple subscribers; or use READPAST if you're sure there are no other processes (besides the multiple subscribers) that might be updating column data in the table for other purposes (e.g. changes to a person’s last name).  NOLOCK is generally the better fit in this part of the scenario. See the following as an example: CREATE PROCEDURE [dbo].[usp_NewCustomersSelect] AS BEGIN -- OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON -- DECLARE TEMP TABLE -- Note that this example uses CustomerId as an identifier; -- you could just use the Identity column Id if that’s all you need. DECLARE @CustomersTempTable TABLE ( CustomerId NVARCHAR(255) ) -- PERFORM UPDATE FIRST -- [Customers] is the name of the table -- [Id] is the Identity Column on the table -- [CustomerId] is the business document key used to identify the -- record globally, i.e. in other systems or across SQL tables -- [Status] is INT or BIT field (if the status is a binary state) -- [LastUpdated] is a datetime field used to record the time of the -- last update UPDATE [Customers] WITH (UPDLOCK) SET [Status] = 1, [LastUpdated] = GETDATE() OUTPUT [INSERTED].[CustomerId] INTO @CustomersTempTable WHERE ([Id] = (SELECT TOP 100 [Id] FROM [Customers] WITH (READPAST) WHERE ([Status] = 0) ORDER BY [Id] ASC)) -- PERFORM SELECT FROM ENTITY TABLE SELECT [C].[CustomerId], [C].[FirstName], [C].[LastName], [C].[Address1], [C].[Address2], [C].[City], [C].[State], [C].[Zip], [C].[ShippingMethod], [C].[Id] FROM [Customers] AS [C] WITH (NOLOCK), @CustomersTempTable AS [TEMP] WHERE ([C].[CustomerId] = [TEMP].[CustomerId]) END In a system that has been designed to have multiple status values for records that need to be processed in the Work Queue it is necessary to have a “Watch Dog” process by which “stale” records in intermediate states (such as “In Progress”) are detected, i.e. a [Status] of 0 = New or Unprocessed; a [Status] of 1 = In Progress; a [Status] of 2 = Processed; etc.. Thus, if you have a business rule that states that the application should only process new records if all of the old records have been processed successfully (or marked as an error), then it will be necessary to build a monitoring process to detect stalled or stale records in the Work Queue, hence the use of the LastUpdated column in the example above. The Status field along with the LastUpdated field can be used as the criteria to detect stalled / stale records. It is possible to put this watchdog logic into the stored procedure above, but I would recommend making it a separate monitoring function. In writing the stored procedure that checks for stale records I would recommend using the same kind of lock semantics as suggested above. The example below looks for records that have been in the “In Progress” state ([Status] = 1) for greater than 60 seconds: CREATE PROCEDURE [dbo].[usp_NewCustomersWatchDog] AS BEGIN -- TO OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON DECLARE @MaxWait int; SET @MaxWait = 60 IF EXISTS (SELECT 1 FROM [dbo].[Customers] WITH (READPAST) WHERE ([Status] = 1) AND (DATEDIFF(s, [LastUpdated], GETDATE()) > @MaxWait)) BEGIN SELECT 1 AS [IsWatchDogError] END ELSE BEGIN SELECT 0 AS [IsWatchDogError] END END Downloads The zip file below contains two SQL scripts: one to create a sample database with the above stored procedures and one to populate the sample database with 10,000 sample records.  I am very grateful to Red-Gate software for their excellent SQL Data Generator tool which enabled me to create these sample records in no time at all. References http://msdn.microsoft.com/en-us/library/ms187373.aspx http://www.techrepublic.com/article/using-nolock-and-readpast-table-hints-in-sql-server/6185492 http://geekswithblogs.net/gwiele/archive/2004/11/25/15974.aspx http://grounding.co.za/blogs/romiko/archive/2009/03/09/biztalk-sql-receive-location-deadlocks-dirty-reads-and-isolation-levels.aspx

  Read the article

• Oracle OpenWorld 2013 – Wrap up by Sven Bernhardt

  - by JuergenKress

  OOW 2013 is over and we’re heading home, so it is time to lean back and reflecting about the impressions we have from the conference. First of all: OOW was great! It was a pleasure to be a part of it. As already mentioned in our last blog article: It was the biggest OOW ever. Parallel to the conference the America’s Cup took place in San Francisco and the Oracle Team America won. Amazing job by the team and again congratulations from our side Back to the conference. The main topics for us are: Oracle SOA / BPM Suite 12c Adaptive Case management (ACM) Big Data Fast Data Cloud Mobile Below we will go a little more into detail, what are the key takeaways regarding the mentioned points: Oracle SOA / BPM Suite 12c During the five days at OOW, first details of the upcoming major release of Oracle SOA Suite 12c and Oracle BPM Suite 12c have been introduced. Some new key features are: Managed File Transfer (MFT) for transferring big files from a source to a target location Enhanced REST support by introducing a new REST binding Introduction of a generic cloud adapter, which can be used to connect to different cloud providers, like Salesforce Enhanced analytics with BAM, which has been totally reengineered (BAM Console now also runs in Firefox!) Introduction of templates (OSB pipelines, component templates, BPEL activities templates) EM as a single monitoring console OSB design-time integration into JDeveloper (Really great!) Enterprise modeling capabilities in BPM Composer These are only a few points from what is coming with 12c. We are really looking forward for the new realese to come out, because this seems to be really great stuff. The suite becomes more and more integrated. From 10g to 11g it was an evolution in terms of developing SOA-based applications. With 12c, Oracle continues it’s way – very impressive. Adaptive Case Management Another fantastic topic was Adaptive Case Management (ACM). The Oracle PMs did a great job especially at the demo grounds in showing the upcoming Case Management UI (will be available in 11g with the next BPM Suite MLR Patch), the roadmap and the differences between traditional business process modeling. They have been very busy during the conference because a lot of partners and customers have been interested Big Data Big Data is one of the current hype themes. Because of huge data amounts from different internal or external sources, the handling of these data becomes more and more challenging. Companies have a need for analyzing the data to optimize their business. The challenge is here: the amount of data is growing daily! To store and analyze the data efficiently, it is necessary to have a scalable and flexible infrastructure. Here it is important that hardware and software are engineered to work together. Therefore several new features of the Oracle Database 12c, like the new in-memory option, have been presented by Larry Ellison himself. From a hardware side new server machines like Fujitsu M10 or new processors, such as Oracle’s new M6-32 have been announced. The performance improvements, when using one of these hardware components in connection with the improved software solutions were really impressive. For more details about this, please take look at our previous blog post. Regarding Big Data, Oracle also introduced their Big Data architecture, which consists of: Oracle Big Data Appliance that is preconfigured with Hadoop Oracle Exdata which stores a huge amount of data efficently, to achieve optimal query performance Oracle Exalytics as a fast and scalable Business analytics system Analysis of the stored data can be performed using SQL, by streaming the data directly from Hadoop to an Oracle Database 12c. Alternatively the analysis can be directly implemented in Hadoop using “R”. In addition Oracle BI Tools can be used to analyze the data. Fast Data Fast Data is a complementary approach to Big Data. A huge amount of mostly unstructured data comes in via different channels with a high frequency. The analysis of these data streams is also important for companies, because the incoming data has to be analyzed regarding business-relevant patterns in real-time. Therefore these patterns must be identified efficiently and performant. To do so, in-memory grid solutions in combination with Oracle Coherence and Oracle Event Processing demonstrated very impressive how efficient real-time data processing can be. One example for Fast Data solutions that was shown during the OOW was the analysis of twitter streams regarding customer satisfaction. The feeds with negative words like “bad” or “worse” have been filtered and after a defined treshold has been reached in a certain timeframe, a business event was triggered. Cloud Another key trend in the IT market is of course Cloud Computing and what it means for companies and their businesses. Oracle announced their Cloud strategy and vision – companies can focus on their real business while all of the applications are available via Cloud. This also includes Oracle Database or Oracle Weblogic, so that companies can also build, deploy and run their own applications within the cloud. Three different approaches have been introduced: Infrastructure as a Service (IaaS) Platform as a Service (PaaS) Software as a Service (SaaS) Using the IaaS approach only the infrastructure components will be managed in the Cloud. Customers will be very flexible regarding memory, storage or number of CPUs because those parameters can be adjusted elastically. The PaaS approach means that besides the infrastructure also the platforms (such as databases or application servers) necessary for running applications will be provided within the Cloud. Here customers can also decide, if installation and management of these infrastructure components should be done by Oracle. The SaaS approach describes the most complete one, hence all applications a company uses are managed in the Cloud. Oracle is planning to provide all of their applications, like ERP systems or HR applications, as Cloud services. In conclusion this seems to be a very forward-thinking strategy, which opens up new possibilities for customers to manage their infrastructure and applications in a flexible, scalable and future-oriented manner. As you can see, our OOW days have been very very interresting. We collected many helpful informations for our projects. The new innovations presented at the confernce are great and being part of this was even greater! We are looking forward to next years’ conference! Links: http://www.oracle.com/openworld/index.html http://thecattlecrew.wordpress.com/2013/09/23/first-impressions-from-oracle-open-world-2013 SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: cattleCrew,Sven Bernhard,OOW2013,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Oracle Enterprise Manager Ops Center : Using Operational Profiles to Install Packages and other Content

  - by LeonShaner

  Oracle Enterprise Manager Ops Center provides numerous ways to deploy content, such as through OS Update Profiles, or as part of an OS Provisioning plan or combinations of those and other "Install Software" capabilities of Deployment Plans.  This short "how-to" blog will highlight an alternative way to deploy content using Operational Profiles. Usually we think of Operational Profiles as a way to execute a simple "one-time" script to perform a basic system administration function, which can optionally be based on user input; however, Operational Profiles can be much more powerful than that.  There is often more to performing an action than merely running a script -- sometimes configuration files, packages, binaries, and other scripts, etc. are needed to perform the action, and sometimes the user would like to leave such content on the system for later use. For shell scripts and other content written to be generic enough to work on any flavor of UNIX, converting the same scripts and configuration files into Solaris 10 SVR4 package, Solaris 11 IPS package, and/or a Linux RPM's might be seen as three times the work, for little appreciable gain.   That is where using an Operational Profile to deploy simple scripts and other generic content can be very helpful.  The approach is so powerful, that pretty much any kind of content can be deployed using an Operational Profile, provided the files involved are not overly large, and it is not necessary to convert the content into UNIX variant-specific formats. The basic formula for deploying content with an Operational Profile is as follows: Begin with a traditional script header, which is a UNIX shell script that will be responsible for decoding and extracting content, copying files into the right places, and executing any other scripts and commands needed to install and configure that content. Include steps to make the script platform-aware, to do the right thing for a given UNIX variant, or a "sorry" message if the operator has somehow tried to run the Operational Profile on a system where the script is not designed to run.  Ops Center can constrain execution by target type, so such checks at this level are an added safeguard, but also useful with the generic target type of "Operating System" where the admin wants the script to "do the right thing," whatever the UNIX variant. Include helpful output to show script progress, and any other informational messages that can help the admin determine what has gone wrong in the case of a problem in script execution.  Such messages will be shown in the job execution log. Include necessary "clean up" steps for normal and error exit conditions Set non-zero exit codes when appropriate -- a non-zero exit code will cause an Operational Profile job to be marked failed, which is the admin's cue to look into the job details for diagnostic messages in the output from the script. That first bullet deserves some explanation.  If Operational Profiles are usually simple "one-time" scripts and binary content is not allowed, then how does the actual content, packages, binaries, and other scripts get delivered along with the script?  More specifically, how does one include such content without needing to first create some kind of traditional package?   All that is required is to simply encode the content and append it to the end of the Operational Profile.  The header portion of the Operational Profile will need to contain the commands to decode the embedded content that has been appended to the bottom of the script.  The header code can do whatever else is needed, and finally clean up any intermediate files that were created during the decoding and extraction of the content. One way to encode binary and other content for inclusion in a script is to use the "uuencode" utility to convert the content into simple base64 ASCII text -- a form that is suitable to be appended to an Operational Profile.   The behavior of the "uudecode" utility is such that it will skip over any parts of the input that do not fit the uuencoded "begin" and "end" clauses.  For that reason, your header script will be skipped over, and uudecode will find your embedded content, that you will uuencode and paste at the end of the Operational Profile.  You can have as many "begin" / "end" clauses as you need -- just separate each embedded file by an empty line between "begin" and "end" clauses. Example:  Install SUNWsneep and set the system serial number Script:  deploySUNWsneep.sh ( <- right-click / save to download) Highlights: #!/bin/sh # Required variables: OC_SERIAL="$OC_SERIAL" # The user-supplied serial number for the asset ... Above is a good practice, showing right up front what kind of input the Operational Profile will require.   The right-hand side where $OC_SERIAL appears in this example will be filled in by Ops Center based on the user input at deployment time. The script goes on to restrict the use of the program to the intended OS type (Solaris 10 or older, in this example, but other content might be suitable for Solaris 11, or Linux -- it depends on the content and the script that will handle it). A temporary working directory is created, and then we have the command that decodes the embedded content from "self" which in scripting terms is $0 (a variable that expands to the name of the currently executing script): # Pass myself through uudecode, which will extract content to the current dir uudecode $0 At that point, whatever content was appended in uuencoded form at the end of the script has been written out to the current directory.  In this example that yields a file, SUNWsneep.7.0.zip, which the rest of the script proceeds to unzip, and pkgadd, followed by running "/opt/SUNWsneep/bin/sneep -s $OC_SERIAL" which is the command that stores the system serial for future use by other programs such as Explorer.   Don't get hung up on the example having used a pkgadd command.  The content started as a zip file and it could have been a tar.gz, or any other file.  This approach simply decodes the file.  The header portion of the script has to make sense of the file and do the right thing (e.g. it's up to you). The script goes on to clean up after itself, whether or not the above was successful.  Errors are echo'd by the script and a non-zero exit code is set where appropriate. Second to last, we have: # just in case, exit explicitly, so that uuencoded content will not cause error OPCleanUP exit # The rest of the script is ignored, except by uudecode # # UUencoded content follows # # e.g. for each file needed, #  $ uuencode -m {source} {source} > {target}.uu5 # then paste the {target}.uu5 files below # they will be extracted into the workding dir at $TDIR # The commentary above also describes how to encode the content. Finally we have the uuencoded content: begin-base64 444 SUNWsneep.7.0.zip UEsDBBQAAAAIAPsRy0Di3vnukAAAAMcAAAAKABUAcmVhZG1lLnR4dFVUCQADOqnVT7up ... VXgAAFBLBQYAAAAAAgACAJEAAADTNwEAAAA= ==== That last line of "====" is the base64 uuencode equivalent of a blank line, followed by "end" and as mentioned you can have as many begin/end clauses as you need.  Just separate each embedded file by a blank line after each ==== and before each begin-base64. Deploying the example Operational Profile looks like this (where I have pasted the system serial number into the required field): The job succeeded, but here is an example of the kind of diagnostic messages that the example script produces, and how Ops Center displays them in the job details: This same general approach could be used to deploy Explorer, and other useful utilities and scripts. Please let us know what you think?  Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

  Read the article

• Who could ask for more with LESS CSS? (Part 3 of 3&ndash;Clrizr)

  - by ToString(theory);

  Welcome back!  In the first two posts in this series, I covered some of the awesome features in CSS precompilers such as SASS and LESS, as well as how to get an initial project setup up and running in ASP.Net MVC 4. In this post, I will cover an actual advanced example of using LESS in a project, and show some of the great productivity features we gain from its usage. Introduction In the first post, I mentioned two subjects that I will be using in this example – constants, and color functions.  I’ve always enjoyed using online color scheme utilities such as Adobe Kuler or Color Scheme Designer to come up with a scheme based off of one primary color.  Using these tools, and requesting a complementary scheme you can get a couple of shades of your primary color, and a couple of shades of a complementary/accent color to display. Because there is no way in regular css to do color operations or store variables, there was no way to accomplish something like defining a primary color, and have a site theme cascade off of that.  However with tools such as LESS, that impossibility becomes a reality!  So, if you haven’t guessed it by now, this post is on the creation of a plugin/module/less file to drop into your project, plugin one color, and have your primary theme cascade from it.  I only went through the trouble of creating a module for getting Complementary colors.  However, it wouldn’t be too much trouble to go through other options such as Triad or Monochromatic to get a module that you could use off of that. Step 1 – Analysis I decided to mimic Adobe Kuler’s Complementary theme algorithm as I liked its simplicity and aesthetics.  Color Scheme Designer is great, but I do believe it can give you too many color options, which can lead to chaos and overload.  The first thing I had to check was if the complementary values for the color schemes were actually hues rotated by 180 degrees at all times – they aren’t.  Apparently Adobe applies some variance to the complementary colors to get colors that are actually more aesthetically appealing to users.  So, I opened up Excel and began to plot complementary hues based on rotation in increments of 10: Long story short, I completed the same calculations for Hue, Saturation, and Lightness.  For Hue, I only had to record the Complementary hue values, however for saturation and lightness, I had to record the values for ALL of the shades.  Since the functions were too complicated to put into LESS since they aren’t constant/linear, but rather interval functions, I instead opted to extrapolate the HSL values using the trendline function for each major interval, onto intervals of spacing 1. For example, using the hue extraction, I got the following values: Interval Function 0-60 60-140 140-270 270-360 Saturation and Lightness were much worse, but in the end, I finally had functions for all of the intervals, and then went the route of just grabbing each shades value in intervals of 1.  Step 2 – Mapping I declared variable names for each of these sections as something that shouldn’t ever conflict with a variable someone would define in their own file.  After I had each of the values, I extracted the values and put them into files of their own for hue variables, saturation variables, and lightness variables…  Example: /*HUE CONVERSIONS*/@clrizr-hue-source-0deg: 133.43;@clrizr-hue-source-1deg: 135.601;@clrizr-hue-source-2deg: 137.772;@clrizr-hue-source-3deg: 139.943;@clrizr-hue-source-4deg: 142.114;.../*SATURATION CONVERSIONS*/@clrizr-saturation-s2SV0px: 0;@clrizr-saturation-s2SV1px: 0;@clrizr-saturation-s2SV2px: 0;@clrizr-saturation-s2SV3px: 0;@clrizr-saturation-s2SV4px: 0;.../*LIGHTNESS CONVERSIONS*/@clrizr-lightness-s2LV0px: 30;@clrizr-lightness-s2LV1px: 31;@clrizr-lightness-s2LV2px: 32;@clrizr-lightness-s2LV3px: 33;@clrizr-lightness-s2LV4px: 34;...   In the end, I have 973 lines of mapping/conversion from source HSL to shade HSL for two extra primary shades, and two complementary shades. The last bit of the work was the file to compose each of the shades from these mappings. Step 3 – Clrizr Mapper The final step was the hardest to overcome as I was still trying to understand LESS to its fullest extent.  Imports As mentioned previously, I had separated the HSL mappings into different files, so the first necessary step is to import those for use into the Clrizr plugin: @import url("hue.less");@import url("saturation.less");@import url("lightness.less"); Extract Component Values For Each Shade Next, I extracted the necessary information for each shade HSL before shade composition: @clrizr-input-saturation: 1px+floor(saturation(@clrizr-input))-1;@clrizr-input-lightness: 1px+floor(lightness(@clrizr-input))-1; @clrizr-complementary-hue: formatstring("clrizr-hue-source-{0}", ceil(hue(@clrizr-input))); @clrizr-primary-2-saturation: formatstring("clrizr-saturation-s2SV{0}",@clrizr-input-saturation);@clrizr-primary-1-saturation: formatstring("clrizr-saturation-s1SV{0}",@clrizr-input-saturation);@clrizr-complementary-1-saturation: formatstring("clrizr-saturation-c1SV{0}",@clrizr-input-saturation); @clrizr-primary-2-lightness: formatstring("clrizr-lightness-s2LV{0}",@clrizr-input-lightness);@clrizr-primary-1-lightness: formatstring("clrizr-lightness-s1LV{0}",@clrizr-input-lightness);@clrizr-complementary-1-lightness: formatstring("clrizr-lightness-c1LV{0}",@clrizr-input-lightness); Here, you can see a couple of odd things…  On the first line, I am using operations to add units to the saturation and lightness.  This is due to some limitations in the operations that would give me saturation or lightness in %, which can’t be in a variable name.  So, I use first add 1px to it, which casts the result of the following functions as px instead of %, and then at the end, I remove that pixel.  You can also see here the formatstring method which is exactly what it sounds like – something like String.Format(string str, params object[] obj). Get Primary & Complementary Shades Now that I have components for each of the different shades, I can now compose them into each of their pieces.  For this, I use the @@ operator which will look for a variable with the name specified in a string, and then call that variable: @clrizr-primary-2: hsl(hue(@clrizr-input), @@clrizr-primary-2-saturation, @@clrizr-primary-2-lightness);@clrizr-primary-1: hsl(hue(@clrizr-input), @@clrizr-primary-1-saturation, @@clrizr-primary-1-lightness);@clrizr-primary: @clrizr-input;@clrizr-complementary-1: hsl(@@clrizr-complementary-hue, @@clrizr-complementary-1-saturation, @@clrizr-complementary-1-lightness);@clrizr-complementary-2: hsl(@@clrizr-complementary-hue, saturation(@clrizr-input), lightness(@clrizr-input)); That’s is it, for the most part.  These variables now hold the theme for the one input color – @clrizr-input.  However, I have one last addition… Perceptive Luminance Well, after I got the colors, I decided I wanted to also get the best font color that would go on top of it.  Black or white depending on light or dark color.  Now I couldn’t just go with checking the lightness, as that is half the story.  You see, the human eye doesn’t see ALL colors equally well but rather has more cells for interpreting green light compared to blue or red.  So, using the ratio, we can calculate the perceptive luminance of each of the shades, and get the font color that best matches it! @clrizr-perceptive-luminance-ps2: round(1 - ( (0.299 * red(@clrizr-primary-2) ) + ( 0.587 * green(@clrizr-primary-2) ) + (0.114 * blue(@clrizr-primary-2)))/255)*255;@clrizr-perceptive-luminance-ps1: round(1 - ( (0.299 * red(@clrizr-primary-1) ) + ( 0.587 * green(@clrizr-primary-1) ) + (0.114 * blue(@clrizr-primary-1)))/255)*255;@clrizr-perceptive-luminance-ps: round(1 - ( (0.299 * red(@clrizr-primary) ) + ( 0.587 * green(@clrizr-primary) ) + (0.114 * blue(@clrizr-primary)))/255)*255;@clrizr-perceptive-luminance-pc1: round(1 - ( (0.299 * red(@clrizr-complementary-1)) + ( 0.587 * green(@clrizr-complementary-1)) + (0.114 * blue(@clrizr-complementary-1)))/255)*255;@clrizr-perceptive-luminance-pc2: round(1 - ( (0.299 * red(@clrizr-complementary-2)) + ( 0.587 * green(@clrizr-complementary-2)) + (0.114 * blue(@clrizr-complementary-2)))/255)*255; @clrizr-col-font-on-primary-2: rgb(@clrizr-perceptive-luminance-ps2, @clrizr-perceptive-luminance-ps2, @clrizr-perceptive-luminance-ps2);@clrizr-col-font-on-primary-1: rgb(@clrizr-perceptive-luminance-ps1, @clrizr-perceptive-luminance-ps1, @clrizr-perceptive-luminance-ps1);@clrizr-col-font-on-primary: rgb(@clrizr-perceptive-luminance-ps, @clrizr-perceptive-luminance-ps, @clrizr-perceptive-luminance-ps);@clrizr-col-font-on-complementary-1: rgb(@clrizr-perceptive-luminance-pc1, @clrizr-perceptive-luminance-pc1, @clrizr-perceptive-luminance-pc1);@clrizr-col-font-on-complementary-2: rgb(@clrizr-perceptive-luminance-pc2, @clrizr-perceptive-luminance-pc2, @clrizr-perceptive-luminance-pc2); Conclusion That’s it!  I have posted a project on clrizr.codePlex.com for this, and included a testing page for you to test out how it works.  Feel free to use it in your own project, and if you have any questions, comments or suggestions, please feel free to leave them here as a comment, or on the contact page!

  Read the article

• Oracle B2B - Synchronous Request Reply

  - by cdwright

  Introduction So first off, let me say I didn't create this demo (although I did modify it some). I got it from a member of the B2B development technical staff. Since it came with only a simple readme file, I thought I would take some time and write a more detailed explanation about how it works. Beginning with Oracle SOA Suite PS5 (11.1.1.6), B2B supports synchronous request reply over http using the b2b/syncreceiver servlet. I’m attaching the demo to this blog which includes a SOA composite archive that needs to be deployed using JDeveloper, a B2B repository with two agreements that need to be deployed using the B2B console, and a test xml file that gets sent to the b2b/syncreceiver servlet using your favorite SOAP test tool (I'm using Firefox Poster here). You can download the zip file containing the demo here. The demo works by sending the sample xml request file (req.xml) to http://<b2bhost>:8001/b2b/syncreceiver using the SOAP test tool.  The syncreceiver servlet keeps the socket connection open between itself and the test tool so that it can synchronously send the reply message back. When B2B receives the inbound request message, it is passed to the SOA composite through the default B2B Fabric binding. A simple reply is created in BPEL and returned to B2B which then sends the message back to the test tool using that same socket connection. I’ll show you the B2B configuration first, then we’ll look at the soa composite. Configuring B2B No additional configuration necessary in order to use the syncreceiver servlet. It is already running when you start SOA. After importing the GC_SyncReqRep.zip repository file into B2B, you’ll have the typical GlobalChips host trading partner and the Acme remote trading partner. Document Management The repository contains two very simple custom XML document definitions called Orders and OrdersResponse. In order to determine the trading partner agreement needed to process the inbound Orders document, you need to know two things about it; what is it and where it came from. So let’s look at how B2B identifies the appropriate document definition for the message. The XSD’s for these two document definitions themselves are not particularly interesting. Whenever you're dealing with custom XML documents, B2B identifies the appropriate document definition for each XML message using an XPath Identification Expression. The expression is entered for each of these document definitions under the document administration tab in the B2B console. The full XPATH expression for the Orders document is  //*[local-name()='shiporder']/*[local-name()='shipto']/*[local-name()='name']/text(). You can see this path in the XSD diagram below and how it uniquely identifies this message. The OrdersReponse document is identified in the same way. The XPath expression for it is //*[local-name()='Response']/*[local-name()='Status']/text(). You can see how it’s path differs uniquely identifying the reply from the request. Trading Partner Profile The trading partner profiles are very simple too. For GlobalChips, a generic identifier is being used to identify the sender of the response document using the host trading partner name. For Acme, a generic identifier is also being used to identify the sender of the inbound request using the remote trading partner name. The document types are added for the remote trading partner as usual. So the remote trading partner Acme is the sender of the Orders document, and it is the receiver of the OrdersResponse document. For the remote trading partner only, there needs to be a dummy channel which gets used in the outbound response agreement. The channel is not actually used. It is just a necessary place holder that needs to be there when creating the agreement. Trading Partner Agreement The agreements are equally simple. There is no validation and translation is not an option for a custom XML document type. For the InboundAgreement (request) the document definition is set to OrdersDef. In the Agreement Parameters section the generic identifiers have been added for the host and remote trading partners. That’s all that is needed for the inbound transaction. For the OutboundAgreement (response), the document definition is set to OrdersResponseDef and the generic identifiers for the two trading partners are added. The remote trading partner dummy delivery channel is also added to the agreement. SOA Composite Import the SOA composite archive into JDeveloper as an EJB JAR file. Open the composite and you should have a project that looks like this. In the composite, open the b2bInboundSyncSvc exposed service and advance through the setup wizard. Select your Application Server Connection and advance to the Operations window. Notice here that the B2B binding is set to Receive. It is not set for Synchronous Request Reply. Continue advancing through the wizard as you normally would and select finish at the end. Now open BPELProcess1 in the composite. The BPEL process is set as a Synchronous Request Reply as you can see below. The while loop is there just to give the process something to do. The actual reply message is prepared in the assignResponseValues assignment followed by an Invoke of the B2B binding. Open the replyResponse Invoke and go to the properties tab. You’ll see that the fromTradingPartnerId, toTradingPartner, documentTypeName, and documentProtocolRevision properties have been set. Testing the Configuration To test the configuration, I used Firefox Poster. Enter the URL for the b2b/syncreceiver servlet and browse for the req.xml file that contains the test request message. In the Headers tab, add the property ‘from’ and give it the value ‘Acme’. This is how B2B will know where the message is coming from and it will use that information along with the document type name to find the right trading partner agreement. Now post the message. You should get back a response with a status of ‘200 OK’. That’s all there is to it.

  Read the article

• Problem Implementing Texture on Libgdx Mesh of Randomized Terrain

  - by BrotherJack

  I'm having problems understanding how to apply a texture to a non-rectangular object. The following code creates textures such as this: from the debug renderer I think I've got the physical shape of the "earth" correct. However, I don't know how to apply a texture to it. I have a 50x50 pixel image (in the environment constructor as "dirt.png"), that I want to apply to the hills. I have a vague idea that this seems to involve the mesh class and possibly a ShapeRenderer, but the little i'm finding online is just confusing me. Bellow is code from the class that makes and regulates the terrain and the code in a separate file that is supposed to render it (but crashes on the mesh.render() call). Any pointers would be appreciated. public class Environment extends Actor{ Pixmap sky; public Texture groundTexture; Texture skyTexture; double tankypos; //TODO delete, temp public Tank etank; //TODO delete, temp int destructionRes; // how wide is a static pixel private final float viewWidth; private final float viewHeight; private ChainShape terrain; public Texture dirtTexture; private World world; public Mesh terrainMesh; private static final String LOG = Environment.class.getSimpleName(); // Constructor public Environment(Tank tank, FileHandle sfileHandle, float w, float h, int destructionRes) { world = new World(new Vector2(0, -10), true); this.destructionRes = destructionRes; sky = new Pixmap(sfileHandle); viewWidth = w; viewHeight = h; skyTexture = new Texture(sky); terrain = new ChainShape(); genTerrain((int)w, (int)h, 6); Texture tankSprite = new Texture(Gdx.files.internal("TankSpriteBase.png")); Texture turretSprite = new Texture(Gdx.files.internal("TankSpriteTurret.png")); tank = new Tank(0, true, tankSprite, turretSprite); Rectangle tankrect = new Rectangle(300, (int)tankypos, 44, 45); tank.setRect(tankrect); BodyDef terrainDef = new BodyDef(); terrainDef.type = BodyType.StaticBody; terrainDef.position.set(0, 0); Body terrainBody = world.createBody(terrainDef); FixtureDef fixtureDef = new FixtureDef(); fixtureDef.shape = terrain; terrainBody.createFixture(fixtureDef); BodyDef tankDef = new BodyDef(); Rectangle rect = tank.getRect(); tankDef.type = BodyType.DynamicBody; tankDef.position.set(0,0); tankDef.position.x = rect.x; tankDef.position.y = rect.y; Body tankBody = world.createBody(tankDef); FixtureDef tankFixture = new FixtureDef(); PolygonShape shape = new PolygonShape(); shape.setAsBox(rect.width*WORLD_TO_BOX, rect.height*WORLD_TO_BOX); fixtureDef.shape = shape; dirtTexture = new Texture(Gdx.files.internal("dirt.png")); etank = tank; } private void genTerrain(int w, int h, int hillnessFactor){ int width = w; int height = h; Random rand = new Random(); //min and max bracket the freq's of the sin/cos series //The higher the max the hillier the environment int min = 1; //allocating horizon for screen width Vector2[] horizon = new Vector2[width+2]; horizon[0] = new Vector2(0,0); double[] skyline = new double[width]; //TODO skyline necessary as an array? //ratio of amplitude of screen height to landscape variation double r = (int) 2.0/5.0; //number of terms to be used in sine/cosine series int n = 4; int[] f = new int[n*2]; //calculating omegas for sine series for(int i = 0; i < n*2 ; i ++){ f[i] = rand.nextInt(hillnessFactor - min + 1) + min; } //amp is the amplitude of the series int amp = (int) (r*height); double lastPoint = 0.0; for(int i = 0 ; i < width; i ++){ skyline[i] = 0; for(int j = 0; j < n; j++){ skyline[i] += ( Math.sin( (f[j]*Math.PI*i/height) ) + Math.cos(f[j+n]*Math.PI*i/height) ); } skyline[i] *= amp/(n*2); skyline[i] += (height/2); skyline[i] = (int)skyline[i]; //TODO Possible un-necessary float to int to float conversions tankypos = skyline[i]; horizon[i+1] = new Vector2((float)i, (float)skyline[i]); if(i == width) lastPoint = skyline[i]; } horizon[width+1] = new Vector2(800, (float)lastPoint); terrain.createChain(horizon); terrain.createLoop(horizon); //I have no idea if the following does anything useful :( terrainMesh = new Mesh(true, (width+2)*2, (width+2)*2, new VertexAttribute(Usage.Position, (width+2)*2, "a_position")); float[] vertices = new float[(width+2)*2]; short[] indices = new short[(width+2)*2]; for(int i=0; i < (width+2); i+=2){ vertices[i] = horizon[i].x; vertices[i+1] = horizon[i].y; indices[i] = (short)i; indices[i+1] = (short)(i+1); } terrainMesh.setVertices(vertices); terrainMesh.setIndices(indices); } Here is the code that is (supposed to) render the terrain. @Override public void render(float delta) { Gdx.gl.glClearColor(1, 1, 1, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); // tell the camera to update its matrices. camera.update(); // tell the SpriteBatch to render in the // coordinate system specified by the camera. backgroundStage.draw(); backgroundStage.act(delta); uistage.draw(); uistage.act(delta); batch.begin(); debugRenderer.render(this.ground.getWorld(), camera.combined); batch.end(); //Gdx.graphics.getGL10().glEnable(GL10.GL_TEXTURE_2D); ground.dirtTexture.bind(); ground.terrainMesh.render(GL10.GL_TRIANGLE_FAN); //I'm particularly lost on this ground.step(); }

  Read the article

• Fix for: Xlib: extension "XINERAMA" missing on display

  - by obeliksz

  I am using Xming 6.9 with putty trying to run libreoffice remotely. It works well, but an error line appears in the terminal from where I launch it: Xlib: extension "XINERAMA" missing on display "localhost:12.0". Looks like it needs this extension but I can't find the necessary dll file (libXinerama-1.dll) for it as it is not included in the package. I ask for a link from where I could download this file (I accept a hit with a lmgtfy if you can do it) or the source code of it and how to complie it on my win7 machine... or just a surface fix could do it also if it is really clean and simple: hide the error line.

  Read the article

• How can I control which IP address IIS7 uses?

  - by brennanwstehling

  In Win2k3 I used httpcfg to tell IIS to listen to specific IP addresses on the server. I want to run Apache with VisualSVN Server on port 80 on another IP address but IIS7 binds to all ports by default. What utility for IIS7 controls the IIS7 bindings? Update: I found the answer. There is a utility called netsh. netsh http add iplisten ipaddress=xxx.xxx.xxx.xxx By default there are not IP addresses on the list so IIS7 will bind to all IP addressed. If you add one IP to the list it will listen to just that IP or any IP added to the list. It is necessary to restart IIS7 for the change to take affect.

  Read the article

• iPad connections to Cisco VPN error -- "Enter your user authentication"

  - by rhart

  Is anyone else having problems with the iPad IPSec (Cisco) VPN configuration? I've configured a Cisco VPN connection to a PIX 501 firewall on a 32GB Wifi Apple iPad. This is done in Settings - General - Network - VPN - Add VPN Configuration - IPSec tab. When everything is set up properly and I attempt to connect I just get a popup that says "Enter your user authentication" with no fields to enter either piece of info, and just OK and Cancel buttons. I've read about similar problems with the VPN client built into Mac OS X and the iPhone 3GS but never with the iPad. Does anybody know a solution? I'm not afraid to change the configuration of my PIX 501 if that's necessary.

  Read the article

• Serial connection over a single USB cable (Windows to linux, or linux to linux)

  - by andyortlieb

  I'm helping out with a project for an embedded device that only has USB and no serial. This device is running Linux. These days, when we need to connect to a serial port on a device we typically use a USB to serial adapter (on something like a phone system or a load balancing device, etc). I would like to know if it is possible to have the host device behave as though it were a serial adapter, thus removing the need for one. Given the nature of USB, is this approach even necessary? To recap, I would like to be able to connect a single A-to-A USB cable from my workstation (be it windows or linux) to this device, for the purpose of administration (especially initial setup), using minicom, putty or hyperterminal. Thanks

  Read the article

• MySQL error: Can't find symbol '_mysql_plugin_interface_version_' in library

  - by Josh Smith

  The boring, necessary details: I'm on Snow Leopard running MySQL locally. I'm trying to install the Sphinx engine for MySQL like so: mysql> install plugin sphinx soname 'sphinx.so'; ERROR 1127 (HY000): Can't find symbol '_mysql_plugin_interface_version_' in library I've Googled everywhere and can't seem to find an actual solution to this problem. For example this issue on the Sphinx forums seems unresolved. Someone else also raised this issue with similar results. The first post linked to an O'Reilly article which says: There is a common problem that might occur at this point: ERROR 1127 (HY000): Can't find symbol '_mysql_plugin_interface_version_' in library If you see a message like this, it is likely that you forgot to include the -DMYSQL_DYNAMIC_PLUGIN option when compiling the plugin. Adding this option to the g++ compile line is required to create a dynamically loadable plug-in. But the article ends on that point; I have no idea what this means or how to resolve the issue.

  Read the article

• IIS, multiple CPU cores, application pools and worker processes - best configuration for a single si

  - by Egghead Design

  Hi We use Kentico CMS and I've exchanged emails with them about a web garden deployment. We have a single site running on a server with 8 cpu cores. In line with Kentico's advice, we have not altered the application pool web garden setting from the default i.e. it is set to a maximum number of worker processes of 1. Our experience is that the site only uses one of the cpu cores - the others are idling. When I emailed them about this, their response was that the OS/IIS would handle this and use other cores as necessary even though the application pool only has a single worker process. Now, I've a lot of respect for the guys at Kentico, but this doesn't seem right to me? Surely, if we want to use all cores, we need to permit eight worker processes (and implement session state storage in SQL server)? Many thanks Tony

  Read the article

• Why does tracerpt use up all of my Sql Server's memory?

  - by Cypher

  We have a MS Sql Server 2008 machine with 12 GB of RAM... twice now within the last week this server was knocked on its backside by a process called "tracerpt.exe" which was found to have taken up ALL of the system's memory and leaving nothing for sqlserver. Done my homework, figured out what this program is... but still no idea why it's hogging up so much RAM (though I have an idea), nor what application is actually executing it. This server is the back-end to a Microsoft Dynamics CRM 4.0 application which is hosted on a separate server and is our production database used for just about everything. If this program is necessary, I would like to be able to find the application that is executing this thing and remove it or disable whatever feature is causing this quite annoying occurrence. Any ideas?

  Read the article

• How to get rid of Thunderbird error "[NONEXISTENT] Unknown Mailbox: Trash"

  - by endolith

  Every time I start Thunderbird, I get this error: The current operation on 'Trash' did not succeed. The mail server for account [email protected] responded: [NONEXISTENT] Unknown Mailbox: Trash (now in authenticated state) (Failure). I've figured out that it goes away if I create folders in my Gmail accounts called "[Imap]/Trash" and "[Imap]/Sent", but why are these necessary? Even if I tell Thunderbird to unsubscribe from them, it still notices when I remove the labels and starts popping up this error again. One account also complains if I remove the "Sent Items" label.

  Read the article

• EC2 hosted service multi-tenant dynamic DNS solution

  - by accidental admin

  I want to change the model of my EC2 hosted service to have a separate sub domain for each tenant (ie. .example.com). My primary DNS is now with dnsmadeeasy.com, but their dynamic DNS offering seem pretty weak: it requires the API to use my full dnsmadeeasy.com account credentials, I rather have the API use a limited privilege credential that can only add/remove/modify subdomain records from what I gather it only allows to modify existing records, does not allow me to dynamically add/remove records for new tenant subdomains My question what are my alternatives? Is there something in the dnsmadeeasy API offering I misunderstood and I should just use them? Is there some other similar DNS service that has a DDNS offering that satisfies my requirements? Or should I just bite the bullet and host my own DNS (my fear is not configuration/learning/know how, my fear is reliability). If you recommend the latter, can you detail the necessary steps or a link to a good tutorial how to?

  Read the article

• Android ProgressDialog Progress Bar doing things in the right order

  - by FauxReal

  I just about got this, but I have a small problem in the order of things going off. Specifically, in my thread() I am setting up an array that is used by a Spinner. Problem is the Spinner is all set and done basically before my thread() is finished, so it sets itself up with a null array. How do I associate the spinners ArrayAdapter with an array that is being loaded by another thread? I've cut the code down to what I think is necessary to understand the problem, but just let me know if more is needed. The problem occurs whether or not refreshData() is called. Along the same lines, sometimes I want to call loadData() from the menu. Directly following loadData() if I try to fire a toast on the next line this causes a forceclose, which is also because of how I'm implementing ProgressDialog. THANK YOU FOR LOOKING public class CMSHome extends Activity { private static List<String> pmList = new ArrayList<String>(); // Instantiate helpers PMListHelper plh = new PMListHelper(); ProjectObjectHelper poc = new ProjectObjectHelper(); // These objects hold lists and methods for dealing with them private Employees employees; private Projects projects; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); // Loads data from filesystem, or webservice if necessary loadData(); // Capture spinner and associate pmList with it through ArrayAdapter spinner = (Spinner) findViewById(R.id.spinner); ArrayAdapter<String> adapter = new ArrayAdapter<String>( this, android.R.layout.simple_spinner_item, pmList); adapter.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item); spinner.setAdapter(adapter); //---the button is wired to an event handler--- Button btn1 = (Button)findViewById(R.id.btnGetProjects); btn1.setOnClickListener(btnListAllProjectsListener); spinner.setOnItemSelectedListener(new MyOnItemSelectedListener()); } private void loadData() { final ProgressDialog pd = ProgressDialog.show(this, "Please wait", "Loading Data...", true, false); new Thread(new Runnable(){ public void run(){ employees = plh.deserializeEmployeeData(); projects = poc.deserializeProjectData(); // Check to see if data actually loaded, if not then refresh if ((employees == null) || (projects == null)) { refreshData(); } // Load up pmList for spinner control pmList = employees.getPMList(); pd.dismiss(); } }).start(); } private void refreshData() { // Refresh data for Projects projects = poc.refreshData(); poc.saveProjectData(mCtx, projects); // Refresh data for PMList employees = plh.refreshData(); plh.savePMData(mCtx, employees); } } <---- EDIT ----- I tried changing loadData() to the following after Jims suggestion. Not sure if I did this right, still doesn't work: private void loadData() { final ProgressDialog pd = ProgressDialog.show(this, "Please wait", "Loading Data...", true, false); new Thread(new Runnable(){ public void run(){ employees = plh.deserializeEmployeeData(); projects = poc.deserializeProjectData(); // Check to see if data actually loaded, if not return false if ((employees == null) || (projects == null)) { refreshData(); } pd.dismiss(); runOnUiThread(new Runnable() { public void run(){ // Load up pmList for spinner control pmList = employees.getPMList(); } }); } }).start(); }

  Read the article

• Hardware firewall vs VMWare firewall appliance

  - by Luke

  We have a debate in our office going on whether it's necessary to get a hardware firewall or set up a virtual one on our VMWare cluster. Our environment consists of 3 server nodes (16 cores w/ 64 GB RAM each) over 2x 1 GB switches w/ an iSCSI shared storage array. Assuming that we would be dedicating resources to the VMWare appliances, would we have any benefit of choosing a hardware firewall over a virtual one? If we choose to use a hardware firewall, how would a dedicated server firewall w/ something like ClearOS compare to a Cisco firewall?

  Read the article

• Exchange 2010: Receiving "You can't send a message on behalf of this user..." error when trying to configure delegate access

  - by Beaming Mel-Bin

  I am trying to give someone (John Doe) delegate access to another account (Jane Doe) in our test environment. However, I receive the following error from Exchange: *Subject:* Undeliverable: You have been designated as a delegate for Jane Dow *To:* Jane Dow Delivery has failed to these recipients or groups: John Doe You can't send a message on behalf of this user unless you have permission to do so. Please make sure you're sending on behalf of the correct sender, or request the necessary permission. If the problem continues, please contact your helpdesk. Diagnostic information for administrators: Generating server: /O=UNIONCO/OU=EXCHANGE ADMINISTRATIVE GROUP (FYD132341234)/CN=RECIPIENTS/CN=jdoe #MSEXCH:MSExchangeIS:/DC=local/DC=unionco:MAILBOX-1[578:0x000004DC:0x0000001D] #EX# Can someone help me troubleshoot this?

  Read the article

• Firewall behind firewall

  - by Makach

  I've recently changed jobs and I've been set up with a new workstation. On all previous places where I've been working they've had some sort of local firewall installed on each and every workstation - but here I've been told not to activate it because it is not necessary since we're already behind a HW Firewall. To me this seem a bit naïve, but I cannot emphasise it. I always thought a local firewall was good practice, ie. if something managed to come through the hw firewall there might be a slight chance other computers on the lan would block the internal threath. We got free access to internet and we got a virus checker installed.

  Read the article

• We have no SW Firewall behind our office HW firewall, admin says its not req'd

  - by Makach

  I've recently changed jobs and I've been set up with a new workstation. On all previous places where I've been working they've had some sort of local firewall installed on each and every workstation - but here I've been told not to activate it because it is not necessary since we're already behind a HW Firewall. To me this seem a bit naïve, but I cannot emphasise it. I always thought a local firewall was good practice, ie. if something managed to come through the hw firewall there might be a slight chance other computers on the lan would block the internal threath. We got free access to internet and we got a virus checker installed.

  Read the article

• RHEL 5.x SCSI Driver .img update for initrd.img

  - by zmische

  I have production DB server (RHEL 5.1) with LSI Megaraid driver loaded during setup via DUD (Driver Upd Diskett). Now I'd like to update kernel and other packeges to 5.4 version. I also downloaded new LSI SCSI driver (megasr-13.11.0922.2009-1-rhel50-u4-all.img ). Could you explain the necessary steps to make this driver visible on boot for new kernel (lets assume, that I've already update kernel to 5.4)? I read the article on Redhat - "How do I add a driver to the initrd.img". Does it contain all the steps I need? Thanks in advance!

  Read the article

• Error while zipping files with unicode characters in names with Win7's "send to > compressed (zipped) folder"

  - by user1306322

  When I try to zip files containing unicode characters in their names, such as © or ™, I get the following error: [Window Title] Compressed (zipped) Folders Error [Content] 'C:\Asd™.txt' cannot be compressed because it includes characters that cannot be used in a compressed folder, such as ™. You should rename this file or directory. [OK] This only became a problem when I reinstalled Windows 7. I probably had some resources necessary from this error to be resolved automatically, but it's almost clean installation now and I can't zip files. How do I fix this? UPD: Some time passed since I posted this question, I installed some of my usual applications, but the problem still exists and I'm not sure if it can be fixed by installing some specific application from before.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >