Search Results

Search found 2209 results on 89 pages for 'tricks'.

Page 64/89 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• How to increase signal/range of your Wi-Fi antenna-less repeater/booster over the network?

  - by kenorb

  I've BT Home Hub in the upper flat (2-3 walls behind) and I'm using WPS Wireless-N Wifi Range Router Repeater Extender in my flat where I'm using my laptop. These are antenna-less devices. Are there any life-hack tricks to increase signal/range of my repeater without buying the new more powerful repeater? I've tried already to move my repeater closer to the ceiling or putting the aluminium foil underneath, but it didn't help. Are there any methods, specific plates or materials which can boost the signal? Specification: Model: WN518W2 Frequency range: 2.4-2.4835GHz Wireless transmit power: 14 ~17 dBm (Typical) Wireless Signal Rates With Automatic Fallback: 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic), 11b: Up to 11Mbps(dynamic) Modulation Technology: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM Receiver Sensitivity: 300M: -68dBm@10% PER / 150M: -68dBm@10% PER / 108M: -68dBm@10% PER / 54M: -68dBm@10% PER / 11M: -85dBm@8% PER / 6M: -88dBm@10% PER / 1M: -90dBm@8% PER Product dimensions: 11 * 6 * 7cm

  Read the article

• Missing disk space in Windows XP

  - by Jørn Schou-Rode

  On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

  Read the article

• DNS: domain2 points to domain1

  - by Yar

  I have one domain ("domain1") that is set up with hosting and mail (hosted by Gmail Apps). This domain works perfectly. I want a second domain ("domain2") to forward to domain1, but I don't want to use "DNS Forwarding." I would like to have it act EXACTLY like domain1, so that domain2/whatever points to the same resource as domain1/whatever WITHOUT AN HTTP REDIRECT NOR BROWSER TRICKS LIKE FRAMES. I would also love to be able to send mail to "blah@domain2" and have it go to "blah@domain1". Can this be set up, and how? I am using GoDaddy as registrar and DNS host for both domains. GoDaddy is also the web host for domain1, and mail hosting is with Google Apps.

  Read the article

• How to extend a window on 4 virtual desktops on Windows 7

  - by Patrice

  This site is very cool, and i often get many answers in it :) But today, I've a question for you. My Problem is: - I want to use a virtual desktop or resolution expander for windows 7 - I want to multiply per 2 a window resolution (i.e. seeing only 25% of one window on a screen) I tried simple tricks that didn't work for me, and installed a virtual desktop (Dexspot, a great one), but I can't manage to strech a window (Google chrome) over the 4 desktops simultaneously. Do you understand my problem, and have an answer to it? This would be great help ;-) See ya! Patrice

  Read the article

• ctrl-v key on AIX

  - by antenore

  Hi all, I'm new to AIX and I miss some tricks that work well on other *nix flavors. I need a CTRL sequence in a ksh scripts, like ^[ (CTRL-[) and to do that I'm habit to use the ctrl-v[ , but here it doesn't work. At the moment I'm obliged to use a windows box with putty so I cannot even edit the scripts on my Linux box and transfer the scripts on the AIX server. Do you know why and how I can fix the issue? Thanks in advance Kind regards Antenore.

  Read the article

• My fingers are cold when using my computer - solutions?

  - by Kjensen

  This might seem silly, and if there is no good and practical solution... I will live. I am a programmer and sit at a computer 10 hours a day - and even though the rest of me is nice and warm (at least warm), my fingers are cold as ice. Are there some gadgets or tricks to keep your fingers warm while typing/mousing? Gloves do not seem like a good solution, since it hinders the movement of the fingers. I have sometimes put my extra laptop next to the mouse pad, so that it vents hot air on the mouse - and that works... But it is not very practical, plus it only works for one hand (and not very well). Tips?

  Read the article

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• My fingers are cold when using my computer - solutions?

  - by Kjensen

  I am a programmer and sit at a computer ten hours a day - and even though the rest of me is nice and warm, my fingers are as cold as ice. Are there any gadgets or tricks to keep your fingers warm while typing/mousing? Gloves do not seem like a good solution, since it hinders the movement of the fingers. I have sometimes put my extra laptop next to the mouse pad so that it vents hot air on the mouse - and that works. However it is not very practical, plus it only works for one hand (and not very well).

  Read the article

• Problem accessing the remote working space on my new SBS 2008 box

  - by Dabblernl

  This supposedly easy to install OS is starting to drive me nuts... SYMPTOMS: When trying to connect to the remote workplace I get (and ignore) the security warning because I am currently testing with the self issued certificate. After loggin in the remote workplace's main screen displays but the images on it do not load. When I try to click the email link I am thrown back to the login screen. If I try the login to exchange directly by typing in the remote.mydomain.com/owa address I get a 403 error that I am denied access. The problem occurs on both a vista and a win 7 machine. It seems that some security setting is playing tricks with me. How can I troubleshoot this?

  Read the article

• is there a cheatsheet for linux commands to save your system?

  - by Asaf

  I've recently lost my window options, had to somehow manipulate my way to Xchat and ask some people how do I get it back (it was metacity --replace, and after I decided to stop the command and run it in background the X was completely useless so I had to do killall -u user). And that was after the internet connection stopped working for some reason (might've been the ISP) ..The thing is, after using linux a long time, I still get the feeling that on dire situations, I don't know the good tricks (stuff like metacity --replace) I feel like a really need like a "rescue" cheatsheet for things like "how to save the X no matter what without pressing reset" and "how to reset the system to "normal state"" "how to connect to the internet through the command line" "how to monitor what the X is doing" (using ubuntu linux 10.04 btw)

  Read the article

• Tool to launch a script driven by modem activity

  - by Will M

  Can anyone suggest a software tool (preferably under Windows XP or later) that would launch an application or script in response to a phone call being received on a landline phone line connected to a data modem on the same PC? or, better, in response to a sequence of touch-tones being played over such a phone line. This would allow, for example, using the telephone to manipulate firewall settings so as to create another layer of security in connection with remote internet access to that computer. I seem to recall seeing tools to do this sort of thing in the days before broadband internet access, when there was more attention to various tips and tricks for the dial-up modem, but a few attempts at Google hasn't turned anything up.

  Read the article

• Does Win7 VPC negate need to re-install?

  - by justSteve

  I fear i have an impending hardware breakdown coming ... the last time the box booted i had to power off and on a couple times before windows loaded. Seems fine when up and running. So i'm preparing to install new hardware and would like to bring over the currently installed image. From what i've read of VM capabilities of VM i shouldn't have to re-install? VM seems most applicable to data centers and enterprises. I'd like to see some coverage of the tricks for SOHO users.

  Read the article

• Route global shortcuts to pages opened in Firefox

  - by zamza

  I like listening to music online on sites like stereomood.com. There is a major problem, however. I can not control the player with my keyboard. And even with a mouse - when I want to play/pause I must activate firefox window, select the tab where music plays and hit play/pause button manually - this is a pain, especially when you play a fullscreen game that can not minimize itself. Thus said, global keyboard shortcuts would be a perfect solution. I understand that different online media players have different controls and each site must be configured individually (like, select button with id 'play' and press it), but I believe that can be done in principle. I also guess that such tricks are impossible without some third-party native app which captures shortcuts and routes them to Firefox window. So, any solutions? Maybe some AutoHotkey hacks or similar.

  Read the article

• Laptop held hostage by administrator domain and Bit locker

  - by user144780

  I have a laptop computer that I had when I was working at an IT company. I don´t work there anymore but I could keep the computer (Lenovo) Suddenly my wireless internet didn´t work anymore showing error "insert SIM into the mobile broadband device" and month later connectiong to internet with cable got disabled I don´t know the password to sign in as an administrator on domain and whatever I try to do/install/change settings... everything needs admin rights. To surf the internet again with the computer I tried to install a new Windows but it´s seems to be protected with Bit Locker, asking for recovery key. I´ve googled and googled bunch of CMD tricks but most of the shows "system error 5 has occured" Is there anyway to get the wireless internet to work, change the admin or install new Windows? - or should I rather enjoying throwing it of the balcony or set it one fire? :)

  Read the article

• Raid 5 scsi fault

  - by HaLaBi

  I have no much knowledge about servers and I was looking all day around the internet about finding a solution to my raid 5 problem. All of a sudden two disks failed. The server won't boot (HP Proliant, windows 2003 R2, very old maybe 10 years old). I know that if one disk is faulty then I can add a new disk and rebuild it and things will be fine, the problem is two went faulty :( is this normal? two at the same time? is there any other thing I can do and I am not aware of? other than taking them out and reinserting them back? Windows won't boot. The Array menu shows that disks 0 and 4 are "Missing". Any other tricks or things to do? It is important because for some unknown reason the back up job did not work for a month and I just found out, so I need to make these raid 5 back online again.

  Read the article

• Top causes of slow ssh logins

  - by Peter Lyons

  I'd love for one of you smart and helpful folks to post a list of common causes of delays during an ssh login. Specifically, there are 2 spots where I see a range from instantaneous to multi-second delays. Between issuing the ssh command and getting a login prompt and between entering the passphrase and having the shell load Now, specifically I'm looking at ssh details only here. Obviously network latency, speed of the hardware and OSes involved, complex login scripts, etc can cause delays. For context I ssh to a vast multitude of linux distributions and some Solaris hosts using mostly Ubuntu, CentOS, and MacOS X as my client systems. Almost all of the time, the ssh server configuration is unchanged from the OS's default settings. What ssh server configurations should I be interested in? Are there OS/kernel parameters that can be tuned? Login shell tricks? Etc?

  Read the article

• Windows doesn't recognise my USB key anymore (it used to work)

  - by dominicbri7

  I use my friend's USB flash drive (Corsair flash voyager 16gb) to transfer files from my laptop to my desktop computer. However, since a couple of days my laptop stopped recognizing the USB key.. while there is still no problems with all other computers. I use Windows 7 64 bits if that can help. I tried uninstalling the driver, rebooting and all those kind of tricks, but it won't work. When I connect it and open the "My computer" window, I see "Removable Disk (G:)" for a moment, then it disappears... then it reappears again and it keeps doing that periodically. I can't even right click then hit "Properties" because it disappears. As I recall, it DOES work on every other computers, I think it has to do with the driver but what can I do?

  Read the article

• How do you do the offsite hard drive backups?

  - by kentchen

  I have been doing hard drive backups for a while, which I believe a lot of you guys do as well, but am having trouble figuring out a better way storing them offsite. I am wondering how you guys out there do that. Any policy or tips & tricks when it comes to offsite store your backups, mainly hard drives not tapes. Thanks in advance. [update] Thanks for mentioning the online backup. We are actually in the middle of this process. And I 100% agree that it's the ultimate way to go. However, considering the cost, sometimes it may not be the option, as it's a quite expensive option if you also consider the application level. I guess online backup can be a very good one in the separate topic. :)

  Read the article

• Opening notebooks

  - by Plastkort

  I have a Compaq CQ40 which has a defective CPU fan, it seems unable to cool the notebook enough at this time, it is constantly running, and if you move the pc up/down to look under it, it makes some sort of chainsaw sound. I have tried to take out all the screws underneath, but I still have a problem with the plastic cover on the above; I am afraid I might break it since it seem to be connected with plastic clips underneath. I have fixed notebooks before, but this one seem new, how can I open the plastic cover above without breaking it? Any advice, tips and tricks would be so nice to have, not only for this notebook, but any future notebook also I might need to repair. It would be nice if anyone here knows a place with video tutorials on this subject as well.

  Read the article

• Hyper-V: determine the guest's name given the GUID

  - by syneticon-dj

  How would I go about determining the guest's name given its GUID or vice-versa, preferably with only the Hyper-V/Server Core stock install at hands? Rationale: I am in favor of having a repository of dirty tricks to revert to when in great need. To immediately quiesce all (storage) operations of a VM guest without losing the state, I used to run kill 17 <all VM's virtual processes> (signaling SIGSTOP) and resumed afterwards using kill 19 <all VM's virtual processes> (signaling SIGCONT) in ESXi/vSphere shell. I tried the same technique with Hyper-V using Process Explorer's "Suspend" functionality on the vmwp.exe processes and it seemed to work. I have yet to find a way for easily identifying the processes to suspend, though - the vmwp command line is only listing a GUID.

  Read the article

• How can I tell if a host is bridged and acting as a router

  - by makerofthings7

  I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

  Read the article

• SVN + Active Directory

  - by rudigrobler

  How do I setup SVN (On a linux box - Centos 5.2) to authenticate using Active Directory? Also: Any tips or tricks? What should I watch out for? How fine grain can I set the access? This group have access to these projects, etc? And how does this work if I use something like tortoissvn to access my repository? What I have learned so far: you need the following modules installed for apache mod_ldap mod_authnz_ldap mod_dav mod_dav_svn mod_authz_svn?

  Read the article

• Windows Server 2008 without telnet client - how to test connecting to remote ports without installing anything new?

  - by S. Cobbs

  I'm looking to see if anyone knows of slick tricks to test connections to remote server ports from Windows server 2008 and variants that don't include the telnet client installed by default. Reason being, I sometimes have clients that want to connect to port 25 for example on a remote server and say they can't. I used to run a quick test by using "telent mailserver.tld 25" or whatever to see if I could get a response on that port. I don't want to have to install the telnet client just to test this if I dont have to - are there any other native windows utilities that will allow me to connect to a remote port?

  Read the article

• Book Review: &ldquo;Inside Microsoft SQL Server 2008: T-SQL Querying&rdquo; by Itzik Ben-Gan et al

  - by Sam Abraham

  In the past few weeks, I have been reading “Inside Microsoft SQL Server 2008: T-SQL Querying” by Itzik Ben-Gan et al. In the next few lines, I will be providing a quick book review having finished reading this valuable resource on SQL Server 2008. In this book, the authors have targeted most of the common as well as advanced T-SQL Querying scenarios that one would use for development on a SQL Server database. Book content covered sufficient theory and practice to empower its readers to systematically write better performance-tuned queries. Chapter one introduced a quick refresher of the basics of query processing. Chapters 2 and 3 followed with a thorough coverage of applicable relational algebra concepts which set a good stage for chapter 4 to dive deep into query tuning. Chapter 4 has been my favorite chapter of the book as it provided nice illustrations of the internals of indexes, waits, statistics and query plans. I particularly appreciated the thorough explanation of execution plans which helped clarify some areas I may have not paid particular attention to in the past. The book continues to focus on SQL operators tackling a few in each chapter and covering their internal workings and the best practices to follow when used. Figures and illustrations have been particularly helpful in grasping advanced concepts covered therein. In conclusion, Inside Microsoft SQL Server 2008: T-SQL Querying provided me with 750+ pages of focused, advanced and practical knowledge that has added a few tips and tricks to my arsenal of query tuning strategies. Many thanks to the O’Reilly User Group Program and its support of our West Palm Beach Developers’ Group. --Sam Abraham

  Read the article

• DevDays ‘00 The Netherlands day #1

  - by erwin21

  First day of DevDays 2010, I was looking forward to DevDays to see all the new things like VS2010, .NET4.0, MVC2. The lineup for this year is again better than the year before, there are 100+ session of all kind of topics like Cloud, Database, Mobile, SharePoint, User experience, Visual Studio, Web. The first session of the day was a keynote by Anders Hejlsberg he talked about the history and future of programming languages. He gave his view about trends and influences in programming languages today and in the future. The second talk that i followed was from the famous Scott Hanselman, he talked about the basics of ASP.NET MVC 2, although it was a 300 level session, it was more like a level 100 session, but it was mentioned by Scott at the beginning. Although it was interesting to see all the basic things about MVC like the controllers, actions, routes, views, models etc. After the lunch the third talk for me was about moving ASP.NET webform applications to MVC from Fritz Onion. In this session he changed an example webform application part by part to a MVC application. He gave some interesting tips and tricks and showed how to solve some issues that occur while converting. Next and the fourth talk was about the difference between LINQ to SQL and  the ADO.NET  Entity Framework from Kurt Claeys. He gave a good understanding about this two options, the demos where in LINQ to SQL and the Entity Framework, the goal was to get a good understanding when and where to use both options. The last talk about this day was also from Scott Hanselman, he goes deeper into the features of ASP.NET MVC 2 and gave some interesting tips, the ninja black belt tips. He gave some tips about the tooling, the new MVC 2 html helper methods, other view engines (like NHaml, spark),T4 templating. With this tips we can be more productive and create web applications better and faster. It was a long and interesting day, I am looking forward to day #2.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >