Search Results

Search found 18845 results on 754 pages for 'the machine charmer'.

Page 641/754 | < Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >

• Delayed internet access

  - by Joel Coel

  When I (and presumably my users) first start up or log in to my computer I can't get internet access until several minutes after logging in. Internet pages like serverfault.com will time out. During this time I can access internal web servers. Sometimes pinging the gateway seems to fix the problem. I'm using Windows 7 on this machine with wifi, and the problem seems limited to the wifi network, which is on a separate vlan. The wired network does not share the problem, but I know it's not the wifi connection itself because the internal sites work. The wifi access point is attached to a 3Com 4200 switch, with the port set for vlan 2 untagged, vlan 1 tagged. The 4200 has a fiber connection to a 3Com 4900SX fiber switch that acts almost as a router here. The fiber connection is vlan 1 untagged vlan 2 tagged at both ends. The gateway is then attached to a different 4200 (vlan 1 untagged, vlan 2 tagged) that has a similar fiber connection to the 4900SX. vlan 2 has 192.168.8.0/22 IPs, vlan 1 has 10.1.0.0/16 IPs. The 4900SX has an interface for both vlans (10.1.1.1/192.168.8.1), as does the gateway (10.1.1.5/192.168.8.5). There is one dchp server for both vlans on the same switch as the gateway. It chooses a dhcp scope based on the interface used by the 4900sx to forward the dhcp request. There is also a network access list on the 4900sx set to deny all vlan2 traffic to any 10.1.x.x host, with exceptions made for a few servers, including dhcp, 4900sx, and the gateway. I think that about covers it. Any ideas on why internet access would be delayed like this?

  Read the article

• Slackware - Assigning routes (IP address ranges) to one of many network adapters

  - by Dogbert

  I am using a Slackware 13.37 virtual machine within VirtualBox (current). I currently have a number of Ubuntu VMs on a single server, along with this Slackware VM. All VMs have been set up to use "Internal Network" mode, so they are all on a private LAN, and can see each other (ie: share files amongst themselves), but they remain private from the outside world. On on the these VMs (the Slackware one), I need to be able to grant it access to both this private network, and the internet at large. The first suggestion I found for handling this is to add another virtual network adapter to the VM, then set it to NAT. This results in the Slackware VM having the following network adapter setup: -NIC#1: Internal Network -NIC#2: NAT I want to set up the first network adapter (NIC#1) to handle all traffic on the following subnets: 10.10.0.0/255.255.0.0 192.168.1.0/255.255.255.0 And I want the second virtual network adapter (NIC#2) to handle everything else (ie: internet access). May I please have some assistance in setting this up on my Slackware VM? Additionally, I have searched for similar questions on SuperUser and Stackoverflow, but they all seem to pertain to my situation (ie: they all refer to OSX, or Ubuntu via the use of some UI-based tool). I'm trying to do this on Slack specifically via the command-line. Thanks!

  Read the article

• Mounting any Windows share from OS X 10.7.5 suddenly stopped working

  - by user2169619

  I have problem with mounting Windows network shares from my OS X 10.7.5 - it worked but it stopped and nothing helps and nothing in logs. Here what I get when trying to mount it manually: mount -t smbfs //10.0.0.7/d /tmp/test When doing sniffing with tshark - no packet it sent through and I get immediately return from the command: mount_smbfs: server connection failed: Unknown error: -1 Nothing in /var/log/syslog.log and /var/log/kern.log. The Finder does not work either - it throws an error that something is wrong (in czech thus I'm not sending the message here). I just cannot connect to any network shares. In virtual Windows 7 in Parallels Desktop I can connect successfully, but not within the network share (so the Win7 is behind OS X NAT) but only with its own IP address. The Windows server share is on the same network segment connected through switch. Any advice how to debug and what can be wrong? I spent hours to find solution on Google and here but no-one with this kind of problem and I do not know how to further debug it since there is no meaningful log / trace etc. I can ping 10.0.0.7 and I can connect to FTP server on 10.0.0.7 - the Windows machine (XP) has firewall completely turned off. The problem is that with tshark, I'm not seeing any packet sending to 10.0.0.7 so it's not even trying to reach the server.

  Read the article

• Having munin server monitoring problem: Graphs not being generated.

  - by geerlingguy

  When I run munin-cron (munin-cron --debug), I get the following error: 2010/05/10 13:39:01 [WARNING] Call to accept timed out. Remaining workers: archstl.org;archstl.archstl.org 2010/05/10 13:39:01 [DEBUG] Active workers: 1/8 These errors simply keep repeating themselves until I quit munin-cron. I've followed the directions for debugging munin on the 'Debugging Munin plugins' wiki page, but I get the following results when going through their directions: After telnetting to localhost 4949, I can see a list of plugins, see a node at archstl.archstl.org, but can't fetch anything. The output is as follows: >fetch cpu . However, on the same machine (which is both the node and the master munin server), I can run munin-run cpu, and it prints the results correctly to the command line, like so: user.value 100829130 nice.value 3479880 system.value 13969362 idle.value 664312639 iowait.value 12180168 irq.value 14242 softirq.value 199526 steal.value 0 Looking at the wiki page mentioned above, it looks like it might be a plugin environment problem, but I can't figure out how to fix/change this... If the plugin does run with munin-run but not through telnet, you probably have a PATH problem. Tip: Set env.PATH for the plugin in the plugin's environment file.

  Read the article

• Why dd finishes instantly when pipelining to cat?

  - by agsamek

  I start bash on Cygwin and type: dd if=/dev/zero | cat /dev/null It finishes instantly. When I type: dd if=/dev/zero > /dev/null it runs as expected and I can issue killall -USR1 dd to see the progress. Why does the former invocation finishes instantly? Is it the same on a Linux box? * Explanation why I asked such stupid question and possibly not so stupid question I was compressing hdd images and some were compressed incorrectly. I ended up with the following script showing the problem: while sleep 1 ; do killall -v -USR1 dd ; done & dd if=/dev/zero bs=5000000 count=200 | gzip -c | gzip -cd | wc -c Wc should write 1000000000 at the end. The problem is that it does not on my machine: bash-3.2$ dd if=/dev/zero bs=5000000 count=200 | gzip -c | gzip -cd | wc -c 13+0 records in 12+0 records out 60000000 bytes (60 MB) copied, 0.834 s, 71.9 MB/s 27+0 records in 26+0 records out 130000000 bytes (130 MB) copied, 1.822 s, 71.4 MB/s 200+0 records in 200+0 records out 1000000000 bytes (1.0 GB) copied, 13.231 s, 75.6 MB/s 1005856128 Is it a bug or am I doing something wrong once again?

  Read the article

• Windows media scaling/interpolation method

  - by MichaelH

  Usually in Windows, if videos or other media is upscaled from a certain resolution to a higher resolution (e.g. "monitor size"), a bilinear filtering algorithm or similar is used, such that the upscaled material doesn't look blocky. On my system however, the used interpolation algorithm changed from 'bilinear' to 'nearest neighbor' at some point, with the effect that upscaled videos (e.g. viewed in MPC or WMP, and also Skype video streams) and games (e.g. from PopCap) appear rather blocky. Not sure what the common factor between those is, could be DirectShow(?). I am not aware of having changed any setting that could have affected this state, in fact I am not even aware such a setting exists. I'm guesing that some installed software must have changed something on my computer. My computer is running Windows 7, but I had already experienced the same effect on an XP machine some while ago, where it changed back again to the more pleasing bilinear interpolation after a while, as magically as the first time. What could be wrong with this installation, and how can I change this upscaling interpolation behavior?

  Read the article

• Windows desktop virutalization instead of replacing work stations

  - by Chris Marisic

  I'm head of the IT department at the small business I work for, however I am primarily a software architect and all of my system administration experience and knowledge is ancillary to software development. At some point this year or next we will be looking at upgrading our workstation environment to a uniform Windows 7 / Office 2010 environment as opposed to the hodge podge collection of various OEM licensed editions of software that are on each different machine. It occurred to me that it is probably possible to forgo upgrading each workstation and instead have it be a dumb terminal to access a virutalization server and have their entire virtual workstation hosted on the server. Now I know basically anything is possible but is this a feasible solution for a small business (25-50 work stations)? Assuming that this is feasible, what type of rough guidelines exist for calculating the required server resources needed for this. How exactly do solutions handle a user accessing their VM, do they log on normally to their physical workstation and then use remote desktop to access their VM, or is it usually done with a client piece of software to negotiate this? What types of software available for administering and monitoring these VM's, can this functionality be achieved out of box with Microsoft Server 2008? I'm mostly interested in these questions relating to Server 2008 with Hyper-V but fell free to offer insight with VMware's product line up, especially if there's any compelling reasons to choose them over Hyper-V in a Microsoft shop. Edit: Just to add some more information on implementation goals would be to upgrade our platform from a Win2k3 / XP environment to a full Windows 2008 / Win7 platform without having to perform any of that associated work with our each differently configured workstation. Also could anyone offer any realistic guidelines for how big of hardware is needed to support 25-50 workstations virtually? The majority the workstations do nothing except Office, Outlook and web. The only high demand workstations are the development workstations which would keep everything local.

  Read the article

• How to clone a HDD and then use the clone with VMware (so that Windows works!)?

  - by Ahmad

  I have a system on which Windows 7 is installed, and I am trying to make a clone of its HDD image, which I then want to use in my main PC with VMware, so that I can boot Windows 7 off the cloned HDD. I used Ultimate Boot CD v5.1.1 with the system whose HDD I wanted to clone, and I cloned it using EaseUs Disk Copy, which comes with Ultimate Boot CD. The source HDD was 250 GB in size which had 3 partitions, while the USB HDD I attached to the system, which was supposed to be the destination/clone HDD, was 320 GB in size. I chose to create an exact replica, and so 250 GB worth of data (partitions, etc.) was copied exactly, and the rest of the space was un-allocated. I now connected this USB HDD to my main PC, fired up VMware Workstation 8 and defined a new Virtual Machine, and chose to boot off the USB HDD. Result is that when Windows is booting (from the cloned HDD inside VMware), I get the blue screen error before I reach the login screen. How can I change my methodology so that Windows even boots from the clone? I can change any tools I use, etc.

  Read the article

• I want to use OpenVPN to access the web and email from China. How?

  - by gaoshan88

  My question: How do I use my already existing OpenVPN setup to enable secure, remote web surfing and email checking from open wireless hotspots? Some long winded details: I am running Ubuntu and have OpenVPN up and working fine as a server. My client machine connects fine as well. However, that just gets me a secure connection to my home network. What I want is to be able to access my VPN server and surf the web or check email securely from anywhere with an open wireless connection. I am frequently in China and having secure, unblocked access would be a boon (especially since I like to work from tea houses and coffee shops and I've already had a password sniffed and hacked once). I already know how to tunnel over SSH via a SOCKS proxy using something like: ssh -ND 8887 -p 22 [email protected] but since I have OpenVPN I figure why not try it? So... what are the steps involved in making it so I can connect to my VPN and the surf and check mail to my hearts content (slowly to be sure but at least it wold be secure). Thx!

  Read the article

• Unable to connect to Windows VPN from iPad

  - by Justin

  I have a 16 GB iPad wifi I can't get to connect to VPN. The error I get is: "A connection could not be established to the PP server. Try reconnecting. If the problem continues, verify your settings and contact your Administrator." I have tried a variety of tasks to troubleshoot the issue: I have verified that another iPad on another network can connect to the VPN I am trying to connect to I can connect to this VPN from the same network the iPad uses on a Windows machine I have verified an iPhone user can connect to this VPN from a different network I have reset the iPad's network settings I have reset the entire iPad and restored settings I have compared my settings w/ a screenshot from the iPad that works and confirmed everything is correct I have used the IP address and domain name of our VPN server in the settings I have tried deleting the VPN settings in the iPad and recreating them I have verified in the logs of VPN server that I'm not even getting to the VPN server (no log entry) I have verified that I cannot VPN from the iPad on separate network (different ISP and router) Are there any other ways to troubleshoot VPN on an iPad?

  Read the article

• Looking for a small, portable, port-mirroring ethernet switch.

  - by user37244

  I recently had a mac go haywire, taking half a minute or more to get www.google.com loaded. Getting its owner to give up the machine for repair was like pulling teeth - they were insisting that it must be something to do with the network, since so much had changed with the local configuration at about the same time their box went haywire. I eventually set up a port mirror to a box that I could remote to so I could show that the mac was only irregularly getting packets onto the network. Demonstrating this faced an additional challenge: the latency of the remote desktop software I was using meant that I had to point to timestamps instead of just the moment the packet flashed up on the screen as my evidence. This particular user was the reason this was so challenging this time around, but I would like to have a box that I can cart from desk to desk to use wireshark on my laptop at any station where I need it. 3com, cisco, netgear, etc. (ad nauseum), all make switches that can be configured for port mirroring, but in my case, the smaller, the better. For the sake of my sanity, I'll probably end up running it off a battery anyway. If my laptop had two ethernet ports, this would be easy. So, whaddya recommand for a device that requires 0 configuration at each powerup (though I'm fine with poking at it for a while to set it up initially.) Small, light, and cheap enough to get it past purchasing? Thanks,

  Read the article

• Linux virtualization choices with graphic acceleration / video card support

  - by Urbn

  I am in the process of building a new desktop machine for work and fun. I am looking to run a undecided flavor of Linux (guessing Ubuntu) as my primary OS and several Windows installs with a Windows 7 install for .net development and gaming as virtualized environments. From my previous experiences with virtualization software in Linux I was never able to find an application that offered descent video card support / graphic acceleration etc. to be capable of playing any games within one of the virtualized environments. And since I will be investing quite a bit of money into this system for gaming I would naturally want to find the best option available to achieve this setup. So Onto my question: Is there any virtualization software available for Linux that has full video card support, graphic acceleration and capable of taking advantage of everything the video cards have to offer within the virtualized environments? Or am I stuck with running Windows 7 as my primary OS and using virtualization for Linux and the other OS's? Also I have no preference on open/closed source and price range would be up to $175.00 to support at least 3 virtualized environments.

  Read the article

• Regarding AD Domain controllers and remote branch offices

  - by Alex

  We have central HQ building and a lot of small branch offices connecting via VPN and want to implement AD (If you can believe we still haven't). We want everyone to log in using domain accounts and be policed centrally. We are OK with having a RODC in a branch office with like 10 computers. But we have these small branches with two to four PCs only. Some of these branches connect to HQ via IPSec site-to-site VPN, some via remote access (client-based) VPN. So there is no problem with ones that have local RODC or connecting to HQ DCs via VPN router. But how about small branches? We don't really want to set up a machine there, neither we want to invest into Windows Server licenses or fancy network equipment. Also, the problem is that we cannot access HQ DCs via VPN because we are not logged in and connected to HQ internal network yet, so DCs aren't reachable. What is typically done in that situation if it is needed to have central management over policies on those PCs? Or is it better to let 'em loose and use local policies and accounts in this situation?

  Read the article

• Rails app returns HTTP 422 for new ServerAlias - Internet Explorer only

  - by Snips

  I have a long-standing Rails app running on Mac OS X (apache2). The set-up uses Apache virtual hosts and Passenger. The Rails app also uses HTTP Basic Authentication. I need to migrate the app from one url domain to another - with some overlap of both domain names being accessible simultaneously for a period. To do this, I've added the new domain name as a ServerAlias of the existing domain name in the Passenger Virtual Host config. I can now Browse the Rails app using both the legacy url, and the new url from any of Safari, Chrome, Firefox, or Internet Explorer. I can also 'HTTP post' updates to the Rails app using Safari, Chrome, or Firefox. All good. Except, attempts to post updates from Internet Explorer result in the Rails app rejecting the update, The Rails app log contains the message, ActionController::InvalidAuthenticityToken (ActionController::InvalidAuthenticityToken): I have other domains & aliases working just fine on this same machine. Any suggestions as to what is causing the Rails app to reject posts from IE would be appreciated.

  Read the article

• setting up tracd behind mod_proxy?

  - by FilmJ

  I'm having trouble setting up mod_proxy and tracd. Seems almost all the search results for this problem take me to the built-in trac documentation page that mentions it as an option. I have several VirtualServers already running on the box in question, so running tracd on port 80 or 443 is not an option, but I do want to make my trac server accessible on this machine without exposing an additional port via the firewall. Making things even more complicated is that I have multiple trac repositories being served by the same instance of tracd, and so I want to set it up so: http://trac.abc.com is proxy'd to localhost:8000/projects/abcproject, and http://trac.def.com is proxy'd to localhost:8000/projects/defproject. Currently, the setup I have below results in 100% 403 errors. The server is running as www-data and the directory where all trac files are stored is owned by www-data, AND tracd (as show below) is running as www-data, so not sure where it's getting hung up. The relevant configuration on /var/apache2/sites-enabled/trac.abc.com: ProxyPass / http://localhost:8000/abcproject ProxyPassReverse / http://localhost:8000/abcproject The relevant configuration on /var/apache2/sites-enabled/trac.def.com: ProxyPass / http://localhost:8000/defproject ProxyPassReverse / http://localhost:8000/defproject The command used to instantiate tracd: tracd -a defproject,/var/www/vhosts/trac-common/users.htdigest,DEFProject -a abcproject,/var/www/vhosts/trac-common/users.htdigest,ABCProject -p 8000 -b localhost -e /var/www/vhosts/trac-common/projects If I access the site at http://localhost:8000/ everything works fine, but if I try to access via any of the proxy'd hosts I end up with 403 at every turn. I've used mod_proxy successfully as described above for other servers, such as couchdb, so maybe this has to do with the headers sent by tracd??

  Read the article

• Sharing music on NAS with other zunes and ipods

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40gb worth of music and my girlfriend has her iPod music library around 30gb. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (zune/ipod) seamlessly.

  Read the article

• virtualized windows 2003 domain with CentOS 5.3 and poor connectivity

  - by Chris Gow

  Hi: I have a test lab set up running a virtualized windows 2003 domain on a CentOS 5.3(xen) host and am experiencing connectivity problems with guests running on other hosts that are part of the same domain. Here's the setup: On Computer A I have CentOS 5.3 running as the host and have virtualized windows 2003 servers for a primary domain controller, a backup domain controller and an exchange server. The primary domain controller also acts as a WINS and dns server. The windows domain appears on a separate subnet from my company's corporate network. Connectivity to any of the virtualized guests on Computer A is fine (remote desktop, ping, what have you). I have another host computer (Computer B) that also has a virtualized Windows 2003 server guest that is part of the same domain. However, connectivity to that guest is flaky at best. I continuously get at least 60% packet loss when I try to ping the guest, and due to that flakiness I can not access any of the services that it runs (remote desktop, web). Now here's the interesting part. It seems to affect only machines running on a different computer than the domain controller that are in the same domain. On Computer B there is another Windows 2003 guest that is not part of the test domain and is on my corporate network. There's no connectivity issues with that guest machine. The problem does not seem to be specific to Computer B either. I created a test VM on my local computer within the test domain and it exhibits the same behaviour as the guest in Computer B. A couple of items to note: - Host OS on both Computer A and B are the same CentOS 5.3 64 bit - Guest OS is Windows 2003 64 bit and 32 bit (the guest on Computer B is 32 bit) - Guest OSes are all up to date (as of Monday) - Host OS on Computer A was upgraded from CentOS 5.2 to 5.3 Update: Sorry I did not follow up with the comments from below. Computer A and B have been moved to their own dedicated switch and the problem has gone away. I'm not sure what the underlying problem(s) were though

  Read the article

• Small business server 2011 standard - applications randomly closing for remote desktop users

  - by Ash King

  Small business server 2011 standard - applications randomly closing for remote desktop users I have an issue where when you are connected through remote desktop (doesn't matter whether you have administrative rights or not). What happens: Any application that you run (outlook, word, excel, notepad, cmd etc..) the application will randomly crash and produce an error as such: Faulting application name: EXCEL.EXE, version: 14.0.6112.5000, time stamp: 0x4e9b2b30 Faulting module name: ieframe.dll, version: 8.0.7600.16930, time stamp: 0x4eeb0187 Exception code: 0xc0000005 Fault offset: 0x0000000000131e03 Faulting process id: 0x3d4c Faulting application start time: 0x01cecf3491388e43 Faulting application path: C:\Program Files\Microsoft Office\Office14\EXCEL.EXE Faulting module path: C:\Windows\System32\ieframe.dll Report Id: 1c06abd4-3b2b-11e3-bd8d-001999b270e9 I noticed the ieframe.dll, but its not constant for every application that crashes, e.g.: Faulting application name: OUTLOOK.EXE, version: 14.0.6109.5005, time stamp: 0x4e79b6c0 Faulting module name: PSTOREC.DLL_unloaded, version: 0.0.0.0, time stamp: 0x4a5be02a Exception code: 0xc0000005 Fault offset: 0x000007fef39c7158 Faulting process id: 0x43f8 Faulting application start time: 0x01cecf33fe5eec26 Faulting application path: C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE Faulting module path: PSTOREC.DLL Report Id: 0c0f5934-3b2b-11e3-bd8d-001999b270e9 I am unable to perform a sfc /scannow command due to the cmd.exe crashing as well.. I have performed a virus scan on the server which did originally pick up 5 viruses: riskware.tool.ck -> File riskware.tool.ck - > Memory Process trojan.agent.bdavgen -> File trojan.agent -> File HiJack.comsysapp -> Registry Data But after removing these and rebooting the machine we have had no luck Has anyone else ever come across this issue before? Also to elaborate it is happening as frequently as every minute.

  Read the article

• overriding default scheduler for blkio requests in cgroups

  - by Aamir Mushtaq

  I am trying to optimize a set of servers that have to reside on single machine. i.e. i can have multiple application server, a DB server and of course a samba server as well in same instance. Now I was looking into several optimizing options available to me. In my quest, i did my tuning of the network stack. coming to the CPU, MEMORY and the BLKIO tweaks, i am using CGROUPS. The problem i am facing is that for enhanced performance in the nature of the applications that i am running, the CFQ Scheduler that is implemented for the BLKIO subsystem is not optimal. I was looking more for a Deadline Scheduler because that will serve my purpose well. My question is whether it is possible for us to change the scheduler in the kernel compilation itself for the BLKIO to Deadline and it will reflect in my usage of [CGROUP hierarchies][3]? Since when running the service cgconf, a new fs is mounted and i dont want it to revert to CFQ scheduler. I also welcome any suggestions that will enable me to have more control over my resources.

  Read the article

• RTNETLINK answers: File exists... maybe because assigned a new mac adress

  - by steven

  I got a "RTNETLINK answers: File exists Failed to bring up eth0:1" on "ifup eth0:1". I suspect it happens because i assigned a new mac adress in my VM's network adapter. Can you tell me how to fix the issue? My configuration looks like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.80 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.1 # Alias being connected to 192.168.10.x Network auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 Why do I get "RTNETLINK answer: File exists.." suddenly? I worked with this configuration before without problems. All i did in the past is to renew the adapters mac adress. At the moment I am connected to the 192.168.10.x Network and if I do /etc/init.d/networking stop /etc/init.d/networking start then i got "RTNETLINK [...] falied to bring up eth0:1" but the strage thing is that i am able to connect to 192.168.10.83 via ssh from my host machine. But I cannot reach the internet from the debian client. I hope it is clear what my problem is, now. update if i change my /etc/network/interfaces like this then "ifup eth0" fails, too with the same error! # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 with verbose option enabled i got: Configuring interfache eth0=eth0 (inet) run-parts --verbose /etc/network/if-pre-up.d ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0 RTNETLINK answers: File exists Failed to bring up eth0. same if i type this manually: ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0

  Read the article

• Lots of strange IP addresses in my Windows Firewall logs. Concern?

  - by gmoore

  Was trying to debug a Samba sharing issue with Mac OS X so I turned on logging for my Windows Firewall. I didn't expect a lot of conections but the thing filled up quickly. Here's a sample: 2009-12-21 08:49:32 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56335 139 - - - - - - - - - 2009-12-21 08:49:33 OPEN-INBOUND TCP 192.168.0.4 192.168.0.3 56337 139 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.73.242 1389 53 - - - - - - - - - 2009-12-21 08:50:02 CLOSE TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN UDP 192.168.0.3 68.87.71.226 60290 53 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1391 80 - - - - - - - - - 2009-12-21 08:50:02 OPEN TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:04 CLOSE TCP 192.168.0.3 212.96.161.238 1393 80 - - - - - - - - - 2009-12-21 08:50:41 CLOSE UDP 192.168.0.3 192.168.0.4 137 50300 - - - - - - - - - I can pick out the local IP addresses (192.168.0.3 is my Windows XP machine, 192.169.0.4 is Mac OS X) as I debug the Samba issue. But some of the others resolve to Comcast (my ISP) and others resolve to weird hosts like van-dns.com and navisite.net. It doesn't look like any connection sent/received any bytes. I used the reference here: http://technet.microsoft.com/en-us/library/cc758040%28WS.10%29.aspx. Is it a cause for concern?

  Read the article

• Execute encrypted files but don't let anybody read them.

  - by Stebi

  I want to provide a virtual machine image with an installed web application. The user should be able to boot the vm (don't login, just boot) and a webserver should start automatically. The point is I want to hide the (ruby) source code of the web application from everyone as there is no obfuscator for ruby. I thought I could use file system encryption to encrypt the directory with the sourcecode (or even a whole partition). But the webserver user must be able to read it automatically after booting. Nobody is allowed to login as the webserver user (or any other user) so no other can read the contents. My questions are now: Is this possible? Because I give away the whole vm everybody could mount its virtual discs and read them (except the encrypted one). Is it now possible to find the key the webserver user needs to decrypt the files and decrypt them manually? Or is it safe to give such a vm away? The problem is that everything needed to decrypt must be included somewhere in the vm else the webserver cannot start automatically. Maybe I'm completely wrong and you have another tip for me securing the source code.

  Read the article

• NFS: Server says "authenticated mount request", but client sees "access denied"

  - by zigdon

  I have two machine, an NFS server (RHEL) and a client (Debian). The server has NFS set up, exporting a particular directory: server:~$ sudo /usr/sbin/rpcinfo -p localhost program vers proto port 100000 2 tcp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 910 status 100024 1 tcp 913 status 100021 1 udp 53391 nlockmgr 100021 3 udp 53391 nlockmgr 100021 4 udp 53391 nlockmgr 100021 1 tcp 32774 nlockmgr 100021 3 tcp 32774 nlockmgr 100021 4 tcp 32774 nlockmgr 100007 2 udp 830 ypbind 100007 1 udp 830 ypbind 100007 2 tcp 833 ypbind 100007 1 tcp 833 ypbind 100011 1 udp 999 rquotad 100011 2 udp 999 rquotad 100011 1 tcp 1002 rquotad 100011 2 tcp 1002 rquotad 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100005 1 udp 1013 mountd 100005 1 tcp 1016 mountd 100005 2 udp 1013 mountd 100005 2 tcp 1016 mountd 100005 3 udp 1013 mountd 100005 3 tcp 1016 mountd server$ cat /etc/exports /dir *.my.domain.com(ro) client$ grep dir /etc/fstab server.my.domain.com:/dir /dir nfs tcp,soft,bg,noauto,ro 0 0 All seems well, but when I try to mount, I see the following: client$ sudo mount /dir mount.nfs: access denied by server while mounting server.my.domain.com:/dir And on the server I see: server$ tail /var/log/messages Mar 15 13:46:23 server mountd[413]: authenticated mount request from client.my.domain.com:723 for /dir (/dir) What am I missing here? How should I be debugging this?

  Read the article

• SQL Server 2005 SE SP3 on Windows Server 2008 R2 x64 premature query disconnections

  - by southernpost

  New Dell PowerEdge R910, 4x8 Intel X7560, 192GB RAM, hardware NUMA, local RAID, Broadcom NetExtreme II multiport NIC, unteamed, TCP Offload disabled, RSS disabled, NetDMA disabled, Hyperthreading disabled. SQL Server 2005 SE x64 SP3 on Windows Server 2008 R2 EE x64. No other apps on server. Max Mem = 180GB, Max DOP = 4. Existing Windows Server 2003 R2 EE x64 app server connecting to Dell via firewall using SQL Authenticated logins. Symptoms: Intermittent errors at the app server: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) Findings: Running queries from SSMS located on another machine within the same domain as the SQL Server run without error. SQLIO showed good performance. Windows and SQL logs show no related messages. Microsoft reveiwed PssDiag trace and stated that "We are not seeing timeouts from SQL Side. The queries bring run against the database are timing out within 9secs. This is a database connectivity error." "we can also see from the AttnSeq column that we are also not seeing any Attentions from the SQL Side.". Dell has confirmed that we are using the latest Broadcom drivers.

  Read the article

• Organizing automatically Windows Files and Folders

  - by Kiquenet

  For Windows only, Organizing the eleventy-billion files you've got stuffed into folders on your hard drive is very "hard". For example, I have one folder on my computer that I save all web downloads to, regardless of file type, size or purpose. Many of the files are only temporary downloads, for instance setup files of applications that I test, demonstration videos that I watch once or documents that I want to read. Some files on the other hand are there to stay, and I used to move them out of the download folder manually in the past. Another files in folders in my computer: many source code, tests, programs, tools, ... I need tecnology for organize billion files. Which best tools for organize, sort, etc automatically your files-folders? Digital Janitor http://davidevitelaru.com/software/digital-janitor/ Belverede http://lifehacker.com/5510961/how-to-automatically-clean-and-organize-your-desktop-downloads-and-other-folders Download Mover http://www.neoteo.com/download-mover-reorganiza-tus-descargas-14188 File/Folder Date Organizer http://seedling.dcmembers.com/other/ffdorg.zip DropIt http://www.lupopensuite.com/db/dropit.htm Others issues about organization files, desktop, etc How to automate the process of organizing audio files on Windows Organizing My Windows Desktop What's a good way for organizing PDF documents on Windows? Folksonomy tagging for files What is your method of “folksonomy” tagging for files on your local machine?

  Read the article

< Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >