Search Results

Search found 1755 results on 71 pages for 'andrew burns'.

Page 65/71 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Tomcat / Railo stop responding with no error output

    - by andrewdixon
    This is going to sound very vague and I'm sure it will be voted down for not giving enough information however I don't really have any to give as you will see. We have an AWS instance running Amazon Linux, Apache, Tomcat and Railo and from time to time the Tomcat/Railo simply stops responding to requests and there are no errors output in the catalina.out file or any of the other log files in the Tomcat logs directory. When I issue the command to restart Tomcat/Railo the restart scripts sits there for a while then says that Tomcat has not responded so it has killed it off and then it starts up again and everything is fine until it happens again, anything from a couple of minutes to a couple of days later. I have done my best to check other logs on the server but have found no messages at all to indicate why Tomcat/Railo has given up and stopped responding. Can anyone suggest any reason why it might be doing this and / or any other log file(s) that we could check to see what is happening. Thanks. Andrew.

    Read the article

  • Twitter Tuesday - Top 10 @ArchBeat Tweets - June 3-9, 2014

    - by OTN ArchBeat
    The Top 10 tweets from @OTNArchBeat for the last seven days. RT @DBAKevlar: #EM12c rel4 is out! Woohoo!! Jun 3, 2014 at 10:36 AM Top 10 Arch Community Articles for May 2014 >> props to @markrittman @kevin_mcginley @porushh et al Jun 4, 2014 at 12:52 PM Architecture of Analytics: @markrittman @kevin_mcginley >> Free OTN Virtual Tech Summit - July 9 Jun 4, 2014 at 09:13 AM My Top 10 Tweets - May 27 - June 2 #ADF #Essbase #FusionApps #Goldengate #Kscope14 #WebLogic. Jun 3, 2014 at 10:27 AM Starting and Stopping a #JavaEE Environment when using Oracle #WebLogic | Rene van Wijk #oracleace Jun 5, 2014 at 11:00 AM Video: #KScope14 Preview: @DebraLilley never stops moving, never stops learning. Jun 3, 2014 at 11:19 AM The OTNArchBeat Daily is out! Stories via @oraclebase Jun 9, 2014 at 01:47 PM Where did my MDB concurrency go? | Eric Gross #weblogic Jun 9, 2014 at 08:48 AM Exalogic Tech tips and code samples from A-Team architect Andrew Hopkinson Jun 6, 2014 at 11:47 AM The OTNArchBeat Daily is out! Stories via @KentGraziano @DBAKevlar @dbasolved Jun 3, 2014 at 01:48 PM adf, essbase,

    Read the article

  • Should I use a config file or database for storing business rules?

    - by foiseworth
    I have recently been reading The Pragmatic Programmer which states that: Details mess up our pristine code—especially if they change frequently. Every time we have to go in and change the code to accommodate some change in business logic, or in the law, or in management's personal tastes of the day, we run the risk of breaking the system—of introducing a new bug. Hunt, Andrew; Thomas, David (1999-10-20). The Pragmatic Programmer: From Journeyman to Master (Kindle Locations 2651-2653). Pearson Education (USA). Kindle Edition. I am currently programming a web app that has some models that have properties that can only be from a set of values, e.g. (not actual example as the web app data confidential): light-type = sphere / cube / cylinder The light type can only be the above three values but according to TPP I should always code as if they could change and place their values in a config file. As there are several incidents of this throughout the app, my question is: Should I store possibly values like these in: a config file: 'light-types' = array(sphere, cube, cylinder), 'other-type' = value, 'etc = etc-value a single table in a database with one line for each config item a database with a table for each config item (e.g. table: light_types; columns: id, name) some other way? Many thanks for any assistance / expertise offered.

    Read the article

  • Thinking Sphinx not working in test mode

    - by J. Pablo Fernández
    I'm trying to get Thinking Sphinx to work in test mode in Rails. Basically this: ThinkingSphinx::Test.init ThinkingSphinx::Test.start freezes and never comes back. My test and devel configuration is the same for test and devel: dry_setting: &dry_setting adapter: mysql host: localhost encoding: utf8 username: rails password: blahblah development: <<: *dry_setting database: proj_devel socket: /tmp/mysql.sock # sphinx requires it test: <<: *dry_setting database: proj_test socket: /tmp/mysql.sock # sphinx requires it and sphinx.yml development: enable_star: 1 min_infix_len: 2 bin_path: /opt/local/bin test: enable_star: 1 min_infix_len: 2 bin_path: /opt/local/bin production: enable_star: 1 min_infix_len: 2 The generated config files, config/development.sphinx.conf and config/test.sphinx.conf only differ in database names, directories and similar things; nothing functional. Generating the index for devel goes without an issue $ rake ts:in (in /Users/pupeno/proj) default config Generating Configuration to /Users/pupeno/proj/config/development.sphinx.conf Sphinx 0.9.8.1-release (r1533) Copyright (c) 2001-2008, Andrew Aksyonoff using config file '/Users/pupeno/proj/config/development.sphinx.conf'... indexing index 'user_core'... collected 7 docs, 0.0 MB collected 0 attr values sorted 0.0 Mvalues, 100.0% done sorted 0.0 Mhits, 99.8% done total 7 docs, 422 bytes total 0.098 sec, 4320.80 bytes/sec, 71.67 docs/sec indexing index 'user_delta'... collected 0 docs, 0.0 MB collected 0 attr values sorted 0.0 Mvalues, nan% done total 0 docs, 0 bytes total 0.010 sec, 0.00 bytes/sec, 0.00 docs/sec distributed index 'user' can not be directly indexed; skipping. but when I try to do it for test it freezes: $ RAILS_ENV=test rake ts:in (in /Users/pupeno/proj) DEPRECATION WARNING: require "activeresource" is deprecated and will be removed in Rails 3. Use require "active_resource" instead.. (called from /Users/pupeno/.rvm/gems/ruby-1.8.7-p249/gems/activeresource-2.3.5/lib/activeresource.rb:2) default config Generating Configuration to /Users/pupeno/proj/config/test.sphinx.conf Sphinx 0.9.8.1-release (r1533) Copyright (c) 2001-2008, Andrew Aksyonoff using config file '/Users/pupeno/proj/config/test.sphinx.conf'... indexing index 'user_core'... It's been there for more than 10 minutes, the user table has 4 records. The database directory look quite diferently, but I don't know what to make of it: $ ls -l db/sphinx/development/ total 96 -rw-r--r-- 1 pupeno staff 196 Mar 11 18:10 user_core.spa -rw-r--r-- 1 pupeno staff 4982 Mar 11 18:10 user_core.spd -rw-r--r-- 1 pupeno staff 417 Mar 11 18:10 user_core.sph -rw-r--r-- 1 pupeno staff 3067 Mar 11 18:10 user_core.spi -rw-r--r-- 1 pupeno staff 84 Mar 11 18:10 user_core.spm -rw-r--r-- 1 pupeno staff 6832 Mar 11 18:10 user_core.spp -rw-r--r-- 1 pupeno staff 0 Mar 11 18:10 user_delta.spa -rw-r--r-- 1 pupeno staff 1 Mar 11 18:10 user_delta.spd -rw-r--r-- 1 pupeno staff 417 Mar 11 18:10 user_delta.sph -rw-r--r-- 1 pupeno staff 1 Mar 11 18:10 user_delta.spi -rw-r--r-- 1 pupeno staff 0 Mar 11 18:10 user_delta.spm -rw-r--r-- 1 pupeno staff 1 Mar 11 18:10 user_delta.spp $ ls -l db/sphinx/test/ total 0 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.spl -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp0 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp1 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp2 -rw-r--r-- 1 pupeno staff 0 Mar 11 18:11 user_core.tmp7 Nothing gets added to a log when this happens. Any ideas where to go from here? I can run the command line manually: /opt/local/bin/indexer --config config/test.sphinx.conf --all which generates the output as the rake ts:in, so no help there.

    Read the article

  • Cross Compiling Boost for use on the Gumstix Overo with GumROS

    - by amelim
    I'm trying to cross-compile boost for use with the ROS framework on a Gumstix Overo. I've been following the posted instructions here (modifying the script when need be), however I've come across an issue where bjam will not compile boost properly. I call bjam as follows: # boost if [ ! -f /opt/gumros/lib/libboost_date_time-gcc41-mt-1_38.so ] ; then if [ ! -f boost_1_38_0.tar.gz ] ; then wget --tries=10 http://heanet.dl.sourceforge.net/sourceforge/boost/boost_1_38_0.tar.gz fi # tar xzf boost_1_38_0.tar.gz cd boost_1_38_0 GPP_PATH=${OVEROTOP}/tmp/cross/armv7a/arm-angstrom-linux-gnueabi/bin/g++ GPP_VER=`${GPP_PATH} -v 2>&1 | tail -1 | awk '{print $3}'` echo "using gcc : ${GPP_VER} : ${GPP_PATH} ; " > tools/build/v2/user-config.jam sudo apt-get install bjam set +o errexit sudo bjam --toolset=gcc-${GPP_VER} --prefix=/opt/gumros --with-date_time install set -o errexit cd .. else echo "boost appears to be already installed; skipping." fi if [ ! -f /opt/gumros/lib/libboost_date_time-gcc41-mt-1_38.so ] ; then echo "Failed to compile libboost_date_time"; exit; fi I've checked the user-config to make sure everything was kosher as well as making sure the GPP_PATH is correct. However, when I run the scrip I come across compilation errors such as: Reading package lists... Done Building dependency tree Reading state information... Done bjam is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. ...patience... ...found 14370 targets... ...updating 14 targets... gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.3.3/release/threading-multi/gregorian/greg_month.o g++: error trying to exec 'cc1plus': execvp: No such file or directory "/home/andrew/overo-oe/tmp/cross/armv7a/arm-angstrom-linux-gnueabi/bin/g++" -ftemplate-depth-128 -O3 -finline-functions -Wno-inline -Wall -pthread -fPIC -DBOOST_ALL_DYN_LINK=1 -DBOOST_ALL_NO_LIB=1 -DDATE_TIME_INLINE -DNDEBUG -I"." -c -o "bin.v2/libs/date_time/build/gcc-4.3.3/release/threading-multi/gregorian/greg_month.o" "libs/date_time/src/gregorian/greg_month.cpp" ...failed gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.3.3/release/threading-multi/gregorian/greg_month.o... gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.3.3/release/threading-multi/gregorian/greg_weekday.o g++: error trying to exec 'cc1plus': execvp: No such file or directory "/home/andrew/overo-oe/tmp/cross/armv7a/arm-angstrom-linux-gnueabi/bin/g++" -ftemplate-depth-128 -O3 -finline-functions -Wno-inline -Wall -pthread -fPIC -DBOOST_ALL_DYN_LINK=1 -DBOOST_ALL_NO_LIB=1 -DDATE_TIME_INLINE -DNDEBUG -I"." -c -o "bin.v2/libs/date_time/build/gcc-4.3.3/release/threading-multi/gregorian/greg_weekday.o" "libs/date_time/src/gregorian/greg_weekday.cpp" ...failed gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.3.3/release/threading-multi/gregorian/greg_weekday.o... gcc.compile.c++ bin.v2/libs/date_time/build/gcc-4.3.3/release/threading-multi/gregorian/date_generators.o g++: error trying to exec 'cc1plus': execvp: No such file or directory Etc... For reference, I'm using this tutorial to help me out. http://www.ros.org/wiki/gumros

    Read the article

  • Regular Expressions Cookbook Is in The Money—Win a Copy

    - by Jan Goyvaerts
    %COOKBOOKFRAME%You may have heard some people say that most book authors never get any royalties. That’s not true because most authors get an advance royalty that is paid before the book is published. That’s the author’s main incentive for writing the book, at least as far as money is concerned. (If money is your main concern, don’t write books.) What is true is that most authors never see any money beyond the advance royalty. Royalty rates are very low. A 10% royalty of the publisher’s price is considered normal. The publisher’s price is usually 45% of the retail price. So if you pay full price in a bookstore, the author gets 4.5% of your money. If there’s more than one author, they split the royalty. It doesn’t take a math degree to figure out that a book needs to sell quite a few copies for the royalty to add up to a meaningful amount of money. But Steven and I must have done something right. Regular Expressions Cookbook is in the money. My royalty statement for the 3rd quartier of 2009, which is the 2nd quarter that the book was on the market, came with a check. I actually received it last month but didn’t get around to blogging about. The amount of the check is insignificant. The point is that the balance is no longer negative. I’m taking this opportunity to pat myself and my co-author on the back. To celebrate the occassion O’Reilly has offered to sponsor a give-away of five (5) copies of Regular Expressions Cookbook. These are the rules of the game: You must post a comment to this blog article including your actual name and actual email address. Names are published, email addresses are not. Comments are moderated by myself (Jan Goyvaerts). If I consider a comment to be offensive or spam it will not be published and not be eligible for any prize. If you don’t know what to say in the comment, just wish me a happy 100000nd birthday, so I don’t have to feel so bad about entering the 6-bit era. Each person commenting has only one chance to win, regardless of the number of comments posted. O’Reilly will be provided with the names and email addresses of the winners (and those email addresses only) in order to arrange delivery. Each winner can choose to receive a printed copy or ebook (DRM-free PDF). If you choose the printed book, O’Reilly pays for shipping to anywhere in the world but not for any duties or taxes your country may impose on books imported from the USA. If you choose the ebook, you’ll need to create an O’Reilly account that is then granted access to the PDF download. You can make your choice after you’ve won, so it doesn’t influence your chance of winning. Contest ends 28 February 2010, GMT+7 (Thai time). Chosen by five calls to Random(78)+1 in Delphi 2010, the winners are: 48: Xiaozu 45: David Chisholm 19: Miquel Burns 33: Aaron Rice 17: David Laing Thanks to everybody who participated. The winners have been notified by email on how to collect their prize.

    Read the article

  • What I Expect From Myself This Year

    - by Lee Brandt
    I am making it a point not to call them resolutions, because the word has become an institution and is beginning to have no meaning. That's why I end up not keeping my resolutions, I think. So in the spirit of holding myself to my own commitments, I will make a plan and some realistic goals. 1.) Lose weight. Everyone has this on their list, but I am going to be conservative and specific. I currently weigh 393lbs. (yeah, I know). So I want to plan to lose 10lbs per month, that's 1lb. every three days, that shouldn't be difficult if I stick to my diet and exercise plan. - How do I do this?     - Diet: vegetarian. Since I already know I have high blood pressure and borderline high cholesterol, a meat-free diet is in order. I was vegan for a little over 2 years in 2006-2008, I think I can handle vegetarian.     - Exercise: at least 3 times (preferably every day) a week for 30 minutes. It has to be something that gets my heart rate up, or burns in my muscles. I can walk for cardio to start and mild calisthenics (girly push-ups, crunches, etc.).         - Move: I spend all my time behind the computer. I have recently started to use a slight variation of the Pomodoro Technique (my Pomodoros are 50 minutes instead of 25). During my 10 minutes every hour to answer emails, chats, etc., I will take a few minutes to stretch. 2.) Get my wife pregnant. We've been talking about it for years. Now that she is done with graduate school and I have a great job, now's the time. We'll be the oldest parents in the PTA most likely, but I don't care. 3.) Blog More. Another favorite among bloggers, but I do have about six drafts for blog posts started. The topics are there all I need to do is flesh out the post. This can be the first hour of any computer time I have after work. As soon as I am done exercising, shower and post. 4.) Speak less. Most people want to speak more. I want to concentrate on the places that I enjoy and that can really use the speakers (like local code camps), rather than trying to be some national speaker. I love speaking at conferences, but I need to spend some more time at home if we're going to get pregnant. 5.) Read more. I got a Kindle for Christmas and I am loving it so far. I have almost finished Treasure Island, and am getting ready to pick my next book. I will probably read a lot of classics for 2 reasons: (1) they teach deep lessons and (2) most are free for the Kindle. 6.) Find my religion. I was raised Southern Baptist, but I want to find my own way. I've been wanting to go to the local Unitarian Church, so I will make a point to go before the end of March. I also want to add a few religious books to my reading list. My boss bought me a copy of Lee Strobel's The Case for Christ: A Journalist's Personal Investigation of the Evidence for Jesus , and I have a copy of Bruce Feiler's Abraham: A Journey to the Heart of Three Faiths (P.S.) . I will start there. Seems like a lot now that I spell it out like this. But these are only starters. I am forty years old. I cannot keep living like I am twenty anymore. So here we go, 2011.

    Read the article

  • JCP Awards 10 Year Retrospective

    - by Heather VanCura
    As we celebrate 10 years of JCP Program Award recognition in 2012,  take a look back in the Retrospective article covering the history of the JCP awards.  Most recently, the JCP awards were  celebrated at JavaOne Latin America in Brazil, where SouJava was presented the JCP Member of the Year Award for 2012 (won jointly with the London Java Community) for their contributions and launch of the Global Adopt-a-JSR Program. This is also a good time to honor the JCP Award Nominees and Winners who have been designated as Star Spec Leads.  Spec Leads are key to the Java Community Process (JCP) program. Without them, none of the Java Specification Requests (JSRs) would have begun, much less completed and become implemented in shipping products.  Nominations for 2012 Start Spec Leads are now open until 31 December. The Star Spec Lead program recognizes Spec Leads who have repeatedly proven their merit by producing high quality specifications, establishing best practices, and mentoring others. The point of such honor is to endorse the good work that they do, showcase their methods for other Spec Leads to emulate, and motivate other JCP program members and participants to get involved in the JCP program. Ed Burns – A Star Spec Lead for 2009, Ed first got involved with the JCP program when he became co-Spec Lead of JSR 127, JavaServer Faces (JSF), a role he has continued through JSF 1.2 and now JSF 2.0, which is JSR 314. Linda DeMichiel – Linda thus involved in the JCP program from its very early days. She has been the Spec Lead on at least three JSRs and an EC member for another three. She holds a Ph.D. in Computer Science from Stanford University. Gavin King – Nominated as a JCP Outstanding Spec Lead for 2010, for his work with JSR 299. His endorsement said, “He was not only able to work through disputes and objections to the evolving programming model, but he resolved them into solutions that were more technically sound, and which gained support of its pundits.” Mike Milikich –  Nominated for his work on Java Micro Edition (ME) standards, implementations, tools, and Technology Compatibility Kits (TCKs), Mike was a 2009 Star Spec Lead for JSR 271, Mobile Information Device Profile 3. David Nuescheler – Serving as the CTO for Day Software, acquired by Adobe Systems, David has been a key player in the growth of the company’s global content management solution. In 2002, he became Spec Lead for JSR 170, Content Repository for Java Technology API, continuing for the subsequent version, JSR 283. Bill Shannon – A well-respected name in the Java community, Bill came to Oracle from Sun as a Distinguished Engineer and is still performing at full speed as Spec Lead for JSR 342, Java EE 7,  as an alternate EC member, and hands-on problem solver for the Java community as a whole. Jim Van Peursem – Jim holds a PhD in Computer Engineering. He was part of the Motorola team that worked with Sun labs on the Spotless VM that became the KVM. From within Motorola, Jim has been responsible for many aspects of Java technology deployment, from an independent Connected Limited Device Configuration (CLDC) and Mobile Information Device Profile (MIDP) implementations, to handset development, to working with the industry in defining many related standards. Participation in the JCP Program goes well beyond technical proficiency. The JCP Awards Program is an attempt to say “Thank You” to all of the JCP members, Expert Group Members, Spec Leads, and EC members who give their time to contribute to the evolution of Java technology.

    Read the article

  • 2014 Conferences - JFokus, JavaLand & GeeCon!

    - by Heather VanCura
    There has been a delay in publishing these past event summaries from early 2014--JFokus in February, JavaLand in March, and GeeCon in May. As we plan for Devoxx UK next week, I found these summaries that did not make it past 'draft' stage.  We had some great successes with the first three events of 2014, a Java developer conference trifecta! Participation topics included Java, the JCP program overall and the Adopt-a-JSR programs.   First up in February was JFokus in Stockholm. The energy and talent in Stockholm is amazing and the conference organizers do a stellar job running it and welcoming the speakers of this event.  I enjoyed the city walk and speaker dinner, as well as many opportunities to interact with conference speakers and attendees, both during and after the conference hours. Reza Rehman invited me to speak during his Java EE 7 lab session about the Adopt-a-JSR program, and I gave a quickie session on the JCP and Adopt-a-JSR.  There was also a late night Birds of a Feather (BoF) session held jointly with Cecelia Borg, Martijn Verburg and Reza Rehman.  This was an interactive conversation with a focus on the Java EE community survey results and encouraging more community participation and collaboration in Java development.  The Java 8 keynote by Georges Saab and Mark Reinhold was also very entertaining,  I was sorry to miss FOSDEM happening the previous weekend this year in Brussels, but I hope to attend in 2015.  Favorite take home gift -- Lambdas cap! In March, the inaugural version of the JavaLand conference happened inside Phantasialand, an amusement park in Germany. Markus Eisele suggested having an Early Adopters area at the conference, which I was keen to implement. In 2013 at Devoxx Belgium we held some activities in the Hackergaren area around Lambdas and Java EE 7, so this was a great opportunity to expand on a more interactive conference format and Andreas Badelt from the program committee helped in the planning for this area.  Daniel Bryant and Mani Sarkar from the London Java Community led some general Adopt-a-JSR discussions and AdoptOpen JDK activities.  JCP Spec Leads, Anatole Tresch from Credit Suisse, leading JSR 354, Money & Currency API, and Ed Burns from Oracle, leading JSR 344, JavaServer Faces 2.2, attended to engage with conference attendees on their JSRs.  Favorite - Stephen Chin's roller coaster video. In May, GeeCon in Krakow was anther awesome conference!  The conference organizers were warm and welcoming and I enjoyed time getting to know the other speakers at the event. There was a JCP and Adopt-a-JSR participation session as well as a moderated panel session on Early Adopters.  We had an amazing panel -- Daniel Bryant, Arun Gupta, Tomasz Borek , and Peter Lawrey. The panel discussed the Adopt-a-JSR and Adopt OpenJDK program, and how the participants work together to get involved and contribute to both the Java SE and Java EE platforms.  If was an interesting discussion and sparked some new ideas on how Java User Groups in Poland and around the world can contribute in a significant and meaningful way to create better and more practical Java standards today and in the future.  Favorite take home gift - GeeCon mug!   These were some of the highlights of the events--looking forward to Devoxx UK next week.  I will publish these details tomorrow!

    Read the article

  • How the SPARC T4 Processor Optimizes Throughput Capacity: A Case Study

    - by Ruud
    This white paper demonstrates the architected latency hiding features of Oracle’s UltraSPARC T2+ and SPARC T4 processors That is the first sentence from this technical white paper, but what does it exactly mean? Let's consider a very simple example, the computation of a = b + c. This boils down to the following (pseudo-assembler) instructions that need to be executed: load @b, r1 load @c, r2 add r1,r2,r3 store r3, @a The first two instructions load variables b and c from an address in memory (here symbolized by @b and @c respectively). These values go into registers r1 and r2. The third instruction adds the values in r1 and r2. The result goes into register r3. The fourth instruction stores the contents of r3 into the memory address symbolized by @a. If we're lucky, both b and c are in a nearby cache and the load instructions only take a few processor cycles to execute. That is the good case, but what if b or c, or both, have to come from very far away? Perhaps both of them are in the main memory and then it easily takes hundreds of cycles for the values to arrive in the registers. Meanwhile the processor is doing nothing and simply waits for the data to arrive. Actually, it does something. It burns cycles while waiting. That is a waste of time and energy. Why not use these cycles to execute instructions from another application or thread in case of a parallel program? That is exactly what latency hiding on the SPARC T-Series processors does. It is a hardware feature totally transparent to the user and application. As soon as there is a delay in the execution, the hardware uses these otherwise idle cycles to execute instructions from another process. As a result, the throughput capacity of the system improves because idle cycles are no longer wasted and therefore more jobs can be run per unit of time. This feature has been in the SPARC T-series from the beginning, so why this paper? The difference with previous publications on this topic is in the amount of detail given. How this all works under the hood is fully explained using two example programs. Starting from the assembly language instructions, it is demonstrated in what way these programs execute. To really see what is happening we go down to the processor pipeline level, where the gaps in the execution are, and show in what way these idle cycles are filled by other copies of the same program running simultaneously. Both the SPARC T4 as well as the older UltraSPARC T2+ processor are covered. You may wonder why the UltraSPARC T2+ is included. The focus of this work is on the SPARC T4 processor, but to explain the basic concept of latency hiding at this very low level, we start with the UltraSPARC T2+ processor because it is architecturally a much simpler design. From the single issue, in-order pipelines of this processor we then shift gears and cover how this all works on the much more advanced dual issue, out-of-order architecture of the T4. The analysis and performance experiments have been conducted on both processors. The results depend on the processor, but in all cases the theoretical estimates are confirmed by the experiments. If you're interested to read a lot more about this and find out how things really work under the hood, you can download a copy of the paper here. A paper like this could not have been produced without the help of several other people. I want to thank the co-author of this paper, Jared Smolens, for his very valuable contributions and our highly inspiring discussions. I'm also indebted to Thomas Nau (Ulm University, Germany), Shane Sigler and Mark Woodyard (both at Oracle) for their feedback on earlier versions of this paper. Karen Perkins (Perkins Technical Writing and Editing) and Rick Ramsey at Oracle were very helpful in providing editorial and publishing assistance.

    Read the article

  • When do you tag your software project?

    - by WilhelmTell of Purple-Magenta
    I realize there are various kinds of software projects: commercial (for John Doe) industrial (for Mr. Montgomery Burns) successful open-source (with audience larger than, say, 10 people) personal projects (with audience size in the vicinity of 1). each of which release a new version of their product on difference conditions. I'm particularly interested in the case of personal projects and open-source projects. When, or under what conditions, do you make a new release of any kind? Do you subscribe to a fixed recurring deadline such as every two weeks? Do you commit to a release of at least 10 minor fixes, or one major fix? Do you combine the two conditions such as at least one condition must hold, or both must hold? I reckon this is a subjective question. I ask this question in light of searching for tricks to keep my projects alive and kicking. Sometimes my projects are active but look as if they aren't because I don't have the confidence to make a release or a tag of any sort for a long time -- in the order of months.

    Read the article

  • Python and a "time value of money" problem.

    - by jamieb
    (I asked this question earlier today, but I did a poor job of explaining myself. Let me try again) I have a client who is an industrial maintenance company. They sell service agreements that are prepaid 20 hour blocks of a technician's time. Some of their larger customers might burn through that agreement in two weeks while customers with fewer problems might go eight months on that same contract. I would like to use Python to help model projected sales revenue and determine how many billable hours per month that they'll be on the hook for. If each customer only ever bought a single service contract (never renewed) it would be easy to figure sales as monthly_revenue = contract_value * qty_contracts_sold. Billable hours would also be easy: billable_hrs = hrs_per_contract * qty_contracts_sold. However, how do I account for renewals? Assuming that 90% (or some other arbitrary amount) of customers renew, then their monthly revenue ought to grow geometrically. Another important variable is how long the average customer burns through a contract. How do I determine what the revenue and billable hours will be 3, 6, or 12 months from now, based on various renewal and burn rates? I assume that I'd use some type of recursive function but math was never one of my strong points. Any suggestions please? Edit: I'm thinking that the best way to approach this is to think of it as a "time value of money" problem. I've retitled the question as such. The problem is probably a lot more common if you think of "monthly sales" as something similar to annuity payments.

    Read the article

  • efficient android rendering

    - by llll
    I've read quite a few tutorials on game programming on android, and all of them provide basically the same solution as to drawing the game, that is having a dedicated thread spinning like this: public void run() { while(true) { if(!surfaceHolder.getSurface().isValid()) continue; Canvas canvas = surfaceHolder.lockCanvas(); drawGame(canvas); /* do actual drawing here */ surfaceHolder.unlockCanvasAndPost(canvas); } } now I'm wondering, isn't this wasteful? Suppose I've a game with very simple graphics, so that the actual time in drawGame is little; then I'm going to draw the same things on and on, stealing cpu from the other threads; a possibility could be skipping the drawing and sleeping a bit if the game state hasn't changed, which I could check by having the state update thread mantaining a suitable status flag. But maybe there are other options. For example, couldn'it be possible to synchronize with rendering, so that I don't post updates too often? Or am I missing something and that is precisely what lockCanvas does, that is it blocks and burns no cpu until proper time? Thanks in advance L.

    Read the article

  • changing the intensity of lighten/darken on bitmaps using PorterDuffXfermode in the Android Paint class

    - by user1116836
    Ok my orignal question has changed. How do i change the intensity of how something like this is effected? DayToNight.setXfermode(new PorterDuffXfermode(Mode.DST_IN)); in my dream world it would have worked like this DayToNight.setXfermode(new PorterDuffXfermode(Mode.DST_IN(10))); the 10 being a level of intensity. An example would be if I had a flickering candle, when the candle burns bright I want the bitmaps I am drawing to the screen to retain their origanol color and brightness, when it flickers I want the bitmaps to be almost blacked out, and I want to darken the Bitmaps as the light dims. I have equations, timers and all that figured out, just not how to actually apply it to change the color/brightness. Maybe burning the images is what im looking for? I just want to change the lightness lol. I feel like using paint.setShader might be a solution, but the information in this area is pretty limited from what i have been able to find. Any help would be appreciated. edit: to be crystal clear, i am looking for a way to lighten/darken bitmaps as I draw them to the canvas

    Read the article

  • determining the starting speed for an accelerated animation (in flash/actionscript but it's a math question)

    - by vulkanino
    This question burns my brain. I have an object on a plane, but for the sake of simplicity let's work just on a single dimension, thus the object has a starting position xs. I know the ending position xe. The object has to move from starting to ending position with an accelerated (acceleration=a) movement. I know the velocity the object has to have at the ending position (=ve). In my special case the ending speed is zero, but of course I need a general formula. The only unknown is the starting velocity vs. The objects starts with vs in xs and ends with ve in xe, moving along a space x with an acceleration a in a time t. Since I'm working with flash, space is expressed in pixels, time is expressed in frames (but you can reason in terms of seconds, it's easy to convert knowing the frames-per-second). In the animation loop (think onEnterFrame) I compute the new velocity and the new position with (a=0.4 for example): vx *= a (same for vy) x += vx (same for y) I want the entire animation to last, say, 2 seconds, which at 30 fps is 60 frames. Now you know that in 60 frames my object has to move from xs to xe with a constant deceleration so that the ending speed is 0. How do I compute the starting speed vs? Maybe there's a simpler way to do this in Flash, but I am now interested in the math/physics behind this.

    Read the article

  • How to get the value of a SELECT HtmlElement in C# webBrowser control

    - by AndrewW
    Hi, In a C# WebBrowser control, I have generated a SELECT HtmlElement with a number of OPTION elements using w.RenderBeginTag(HtmlTextWriterTag.Select). I need to get the value of the select when the user changes it, and so added an event handler in the WebBrowser DocumentCompleted event. private void webBrowser1_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { .... webBrowser1.Document.GetElementById("id_select_0").AttachEventHandler("onchange", new EventHandler(ddSelectedIndexChanged)); .... } protected void ddSelectedIndexChanged(object sender, EventArgs e) { .... } The event handler does get called, but the sender parameter is null and e is empty. Does anyone know how to overcome this problem? Andrew

    Read the article

  • JavaScript and CSS files for ASP.NET MVC 2 EditorTemplate user controls

    - by Zack Peterson
    I'm using an EditorTemplate DateTime.ascx in my ASP.NET MVC 2 project. <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<DateTime>" %> <%: Html.TextBox(String.Empty, Model.ToString("M/dd/yyyy h:mm tt")) %> <script type="text/javascript"> $(function () { $('#<%: ViewData.TemplateInfo.GetFullHtmlFieldId(String.Empty) %>').AnyTime_picker({ format: "%c/%d/%Y %l:%i %p" }); }); </script> This uses the Any+Time™ JavaScript library for jQuery by Andrew M. Andrews III. I've added those library files (anytimec.js and anytimec.css) to the <head> section of my master page. Rather than include these JavaScript and Cascading Style Sheet files on every page of my web site, how can I instead include the .js and .css files only on pages that need them--pages that edit a DateTime type value?

    Read the article

  • How do you get AOL's OpenID site verification to work?

    - by Shawn Miller
    I have an OpenID relying party setup and using XRDS. It passes the "RP has discoverable return_to" interop test over at http://test-id.org/RP/DiscoverableReturnTo.aspx. Yahoo no longer complains with the message "Warning: This website has not confirmed its identity with Yahoo! and might be fraudulent." as outlined in Andrew Arnott's excellent blog post: http://blog.nerdbank.net/2008/06/why-yahoo-says-your-openid-site.html However, when I try to authenticate using AOL I see the "Warning! site verification could not be completed." message.

    Read the article

  • m2eclipse resource filtering

    - by drewzilla
    I've having problems with resource filtering using m2eclipse Maven support in Eclipse. It seems that filtering only takes place on resources that have changed. This is fundamentally flawed because, if I have a file that references properties (e.g. ${my.property}, if the value of the property changes, the filtering will only be performed if the referencing file is also modified - if I only change the property value (in my pom.xml), the filtering is not applied to the files that that reference it. So, if I make a change to a property in my pom file, the filtering is not applied. However, if I then go to the file that references that property (e.g. a Spring config file) then edit and save it, the filtering is applied. I did read somewhere that: "m2eclipse skips filtering if there were no resource changes during incremental build" I'm using m2eclipse 0.10.x Has anyone else come across this? Thanks, Andrew

    Read the article

  • NFS issue brings down entire vSphere ESX estate

    - by growse
    I experienced an odd issue this morning where an NFS issue appeared to have taken down the majority of my VMs hosted on a small vSphere 5.0 estate. The infrastructure itself is 4x IBM HS21 blades running around 20 VMs. The storage is provided by a single HP X1600 array with attached D2700 chassis running Solaris 11. There's a couple of storage pools on this which are exposed over NFS for the storage of the VM files, and some iSCSI LUNs for things like MSCS shared disks. Normally, this is pretty stable, but I appreciate the lack of resiliancy in having a single X1600 doing all the storage. This morning, in the logs of each ESX host, at around 0521 GMT I saw a lot of entries like this: 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4cf9a8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4dc9e8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4d3fa8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4de0a8 3 [....] 2011-11-30T06:16:07.042Z cpu0:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:17:01.459Z cpu2:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:25:17.887Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000a4c2b28 3 2011-11-30T06:27:16.063Z cpu3:4011)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:35:30.827Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:36:37.953Z cpu6:2054)NFS: 292: Restored connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:40:08.242Z cpu6:2054)NFSLock: 608: Stop accessing fd 0x41000a4c3e68 3 2011-11-30T06:40:34.647Z cpu3:2051)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:44:42.663Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:44:53.973Z cpu0:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:51:28.296Z cpu5:2058)NFSLock: 608: Stop accessing fd 0x41000ae3c528 3 2011-11-30T06:51:44.024Z cpu4:2052)NFSLock: 568: Start accessing fd 0x41000ae3b8e8 again 2011-11-30T06:56:30.758Z cpu4:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:56:53.389Z cpu7:2055)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T07:01:50.350Z cpu6:2054)ScsiDeviceIO: 2316: Cmd(0x41240072bc80) 0x12, CmdSN 0x9803 to dev "naa.600508e000000000505c16815a36c50d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. 2011-11-30T07:03:48.449Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000ae46b68 3 2011-11-30T07:03:57.318Z cpu4:4009)NFSLock: 568: Start accessing fd 0x41000ae48228 again (I've put a complete dump from one of the hosts on pastebin: http://pastebin.com/Vn60wgTt) When I got in the office at 9am, I saw various failures and alarms and troubleshooted the issue. It turned out that pretty much all of the VMs were inaccessible, and that the ESX hosts either were describing each VM as 'powered off', 'powered on', or 'unavailable'. The VMs described as 'powered on' where not in any way reachable or responding to pings, so this may be lies. There's absolutely no indication on the X1600 that anything was awry, and nothing on the switches to indicate any loss of connectivity. I only managed to resolve the issue by rebooting the ESX hosts in turn. I have a number of questions: What the hell happened? If this was a temporary NFS failure, why did it put the ESX hosts into a state from which a reboot was the only recovery? In the future, when the NFS server goes a little off-piste, what would be the best approach to add some resilience? I've been looking at budgeting for next year and potentially have budget to purchase another X1600/D2700/disks, would an identical mirrored disk setup help to mitigate these sorts of failures automatically? Edit (Added requested details) To expand with some details as requested: The X1600 has 12x 1TB disks lumped together in mirrored pairs as tank, and the D2700 (connected with a mini SAS cable) has 12x 300GB 10k SAS disks lumped together in mirrored pairs as sastank zpool status pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c7t0d0s0 ONLINE 0 0 0 errors: No known data errors pool: sastank state: ONLINE scan: scrub repaired 0 in 74h21m with 0 errors on Wed Nov 30 02:51:58 2011 config: NAME STATE READ WRITE CKSUM sastank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t14d0 ONLINE 0 0 0 c7t15d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t16d0 ONLINE 0 0 0 c7t17d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t18d0 ONLINE 0 0 0 c7t19d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t20d0 ONLINE 0 0 0 c7t21d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t22d0 ONLINE 0 0 0 c7t23d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t24d0 ONLINE 0 0 0 c7t25d0 ONLINE 0 0 0 errors: No known data errors pool: tank state: ONLINE scan: scrub repaired 0 in 17h28m with 0 errors on Mon Nov 28 17:58:19 2011 config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t1d0 ONLINE 0 0 0 c7t2d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t3d0 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 c7t6d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t8d0 ONLINE 0 0 0 c7t9d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t10d0 ONLINE 0 0 0 c7t11d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t12d0 ONLINE 0 0 0 c7t13d0 ONLINE 0 0 0 errors: No known data errors The filesystem exposed over NFS for the primary datastore is sastank/VMStorage zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 45.1G 13.4G 92.5K /rpool rpool/ROOT 2.28G 13.4G 31K legacy rpool/ROOT/solaris 2.28G 13.4G 2.19G / rpool/dump 15.0G 13.4G 15.0G - rpool/export 11.9G 13.4G 32K /export rpool/export/home 11.9G 13.4G 32K /export/home rpool/export/home/andrew 11.9G 13.4G 11.9G /export/home/andrew rpool/swap 15.9G 29.2G 123M - sastank 1.08T 536G 33K /sastank sastank/VMStorage 1.01T 536G 1.01T /sastank/VMStorage sastank/comstar 71.7G 536G 31K /sastank/comstar sastank/comstar/sql_tempdb 6.31G 536G 6.31G - sastank/comstar/sql_tx_data 65.4G 536G 65.4G - tank 4.79T 578G 42K /tank tank/FTP 269G 578G 269G /tank/FTP tank/ISO 28.8G 578G 25.9G /tank/ISO tank/backupstage 2.64T 578G 2.49T /tank/backupstage tank/cifs 301G 578G 297G /tank/cifs tank/comstar 1.54T 578G 31K /tank/comstar tank/comstar/msdtc 1.07G 579G 32.8M - tank/comstar/quorum 577M 578G 47.9M - tank/comstar/sqldata 1.54T 886G 304G - tank/comstar/vsphere_lun 2.09G 580G 22.2M - tank/mcs-asset-repository 7.01M 578G 6.99M /tank/mcs-asset-repository tank/mscs-quorum 55K 578G 36K /tank/mscs-quorum tank/sccm 16.1G 578G 12.8G /tank/sccm As for the networking, all connections between the X1600, the Blades and the switch are either LACP or Etherchannel bonded 2x 1Gbit links. Switch is a single Cisco 3750. Storage traffic sits on its own VLAN segregated from VM machine traffic.

    Read the article

  • mod_rewrite apache

    - by Peter
    is there any way to hide redirected url, here is what I think: RewriteEngine On RewriteCond %{REQUEST_FILENAME} -f RewriteRule ^(.*)$ http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://%{HTTP_HOST}%{REQUEST_URI}&force So the long redirected url http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://%{HTTP_HOST}%{REQUEST_URI} to something shorter like /mintedomain.com/track/ It is possible? Adrian edit: Andrew: This is a stats software Mint (haveamint.com) with File Download tracker plugin. The File Download tracker works in this way: in .htaccess every file (zip, rar, txt,...) is redirected to the tracker.php file (because the stats): http://mydomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://%{HTTP_HOST}%{REQUEST_URI} So the redirected url look like this for a zip file: http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://mydomain/downloads/apple.zip This redirected URL is very long and ugly. The best for me would be to redirect this redirected URL to something shorter URL: example: http://mydomain.com/track/downloads/apple.zip.. So the http://mydomain.com/track would be the http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php

    Read the article

  • Is there a way to create custom UIDataDetectorTypes?

    - by KingAndrew
    Hi All, What I am trying to do is create tooltip functionality so that certain words in my instructional app can be tapped and the definition pops up. For the popup part I plan on using code from “AFInformationView” which provides bubbles on the iPhone. The part I'm struggling with is how to associate A particular word's location with the bubble. Currently I have the text on a UILabel that is on a custom UITableCell. Since I calculate the row height on the fly with: [textToUse sizeWithFont:[UIFont systemFontOfSize:FONT_SIZE] constrainedToSize:CGSizeMake(stop-start, 500)]; I'm not sure what the coordinates for a specific word will be. I was thinking that if I created a custom DataDetectorType that could be the fix. If anyone knows how to do this or has any other ideas I would be happy to hear them. Thanks, Andrew

    Read the article

  • Which operating systems book should I go for?

    - by pecker
    Hi, I'm in a confusion. For our course (1 year ago) I used Stallings. I read it. It was fine. But I don't own any operating system's book. I want to buy a book on operating systems. I'm confused!! which one to pick? Modern Operating Systems (3rd Edition) ~ Andrew S. Tanenbaum (Author) Operating System Concepts ~ Abraham Silberschatz , Peter B. Galvin, Greg Gagne Operating Systems: Internals and Design Principles (6th Edition) ~ William Stallings I've plans of getting into development of realworld operating systems : Linux, Unix & Windows Driver Development. I know that for each of these there are specific books available. But I feel one should have a basic book on the shelf. So, which one to go for?

    Read the article

  • Mod_rewrite shortening url .htaccess

    - by Peter
    is there any way to hide redirected url, here is what I think: RewriteEngine On RewriteCond %{REQUEST_FILENAME} -f RewriteRule ^(.*)$ http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://%{HTTP_HOST}%{REQUEST_URI}&force So the long redirected url http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://%{HTTP_HOST}%{REQUEST_URI} to something shorter like /mintedomain.com/track/ It is possible? Adrian edit: Andrew: This is a stats software Mint (haveamint.com) with File Download tracker plugin. The File Download tracker works in this way: in .htaccess every file (zip, rar, txt,...) is redirected to the tracker.php file (because the stats): http://mydomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://%{HTTP_HOST}%{REQUEST_URI} So the redirected url look like this for a zip file: http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php?url=http://mydomain/downloads/apple.zip This redirected URL is very long and ugly. The best for me would be to redirect this redirected URL to something shorter URL: example: http://mydomain.com/track/downloads/apple.zip.. So the http://mydomain.com/track would be the http://minteddomain.com/mint/pepper/tillkruess/downloads/tracker.php

    Read the article

  • Bash commands not executed when through cron job - PHP

    - by basicxman
    Hi there! I have a cron job running a PHP script every five minutes; the PHP script executes two bash commands at the end of the script. I know the script is running due to a log file it appends to. When I run the PHP script manually via the Ubuntu Gnome Terminal both bash commands execute flawlessly; however when the PHP script is triggered via cron, the two bash commands are not ran. Any ideas? $command = 'notify-send "' . count($infoleakPosts) . ' New Posts."'; `$command`; $command = 'firefox http://example.com'; `$command`; */1 * * * * php /home/andrew/grab.php USERNAME PASSWORD # JOB_ID_1

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71  | Next Page >