Search Results

Search found 2353 results on 95 pages for 'browse'.

Page 65/95 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Security and data backup for Ubuntu usb installation

  - by AMS949

  Due to encryption on my corporate laptop I opted to install Ubuntu 9.10 on a flash drive and just use it as my hard drive. I tried the vmware but it crashed my xp a couple of times. Now I have a couple of concerns since I am totally new to Ubuntu and Linux. First, would it be possible for me to transfer my installation to a new usb drive? I now have a 4gb and it may get filled up soon, I don't seem to be able to see my actual files when I browse the usb drive. I also tried copying all files from this usb to another and boot from it but that failed. Second, whenever the system boots up I am never prompted for a password, it is always the username ubuntu. Which I guess means if I lose my usb drive my data is open wide. Is there a way to secure it or to use users and groups as on a regular hard drive installation? As a background, I created this by going into a working Ubuntu installation, System - Administration - USB Starter Disk Creator (was that the right way to start with?) Thanks!

  Read the article

• Dropbox failing to update?

  - by Mick

  I have two PC's at home. One XP the other Windows 7-64bit. I have a word document that I edit on either PC - to enable this I have the file stored in a Dropbox folder. This usually works fine - but sometimes I find that the file does not get updated on my windows7 PC. I.e. I edit the file on my Windows XP machine, then go to my Windows 7 PC and see that there is a previous, old, datestamp on the file and sure enough if I open up the file to have a look, I see that the latest edits are not included. If I right-click on the file and select "Browse on Dropbox website" I see that the latest file is correctly there. Surely there must be some option to say please update this file - but can find no such thing. Has something gone wrong? I should point out that my wireless internet connection is a little intermittent - could this have caused some glitch? By the way I do not leave the old file open in word on my Windows-7 PC as I can well imagine that would cause trouble. Also I should mention that the icon on the document has the little green tick on it showing that Dropbox is not in the process of doing a transfer. Also the Dropbox icon in my system tray also has the green tick - so Dropbox is not busy transferring some other file(s). If I hover the mouse over the Dropbox icon I get the tooltip "All files up to date".

  Read the article

• Filtered Router Interface

  - by jviotti

  I'm having some problems with a Scientific-Atlanta DPR2320R2. In specific with the WIFI. A few months ago I changed its password and username and now I can't remember. So I tried cracking it with Hydra but it drove things worse. Content of webadmin was rendered partial, and threw lot of errors. I then reseted the router. I found myself abled to browse the web with ethernet-connected pc. Wifi is configured by registering the device's MAC Address, and indeed the router has been reseted and register MAC address were lost. No device could connect to wifi. In fact, the device does not even recognize the network. I tried the pointing to 192.168.0.1 to restablish the MAC's. But I couldn't connect to the router access point. Tried listing up hosts: $ nmap -sP 192.168.0.0/24 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:18 ART Host 192.168.0.1 is up (0.0018s latency). Host 192.168.0.11 is up (0.00025s latency). Nmap done: 256 IP addresses (2 hosts up) scanned in 59.62 seconds Then checked 192.168.0.1 was really up by sending pings. It responded to all my pings. I quick-scanned the access point: $ nmap 192.168.0.1 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:08 ART Interesting ports on 192.168.0.1: Not shown: 999 closed ports PORT STATE SERVICE 80/tcp filtered http Nmap done: 1 IP address (1 host up) scanned in 6.73 seconds Look the state of the port 80: FILTERED. I'm pretty confused now. Any suggestion would be appreciated. Thanks in advance.

  Read the article

• How can I set Vim to obey accents of my spoken language?

  - by naxa

  When pressing w or e in sentences with accents (written in my native language), such as the first one (marked **) here: **Éj-mélybol fölzengo** - csing-ling-ling - száncsengo. Száncsengo - csing-ling-ling - tél csendjén halkan ring. [1] the characters o, ö, among others [2], make my gVim think they are word-ends so it stops on them (in Normal mode). gVim stops on the positions marked with _ where it shouldn't: Éj-mélyb_ol f_ölzeng_o. I would like to set gVim so it properly handle words even when containing accents and other local characters. But where do I set this? I use it on Win32, vim v 7.3.46. [1] - excerpt of a poem by Weöres Sándor [2] - "others", not mentioned here :) like í, u are also a problem. On the other hand, gVim seems to already work with é and á. gVim version info: VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32

  Read the article

• Diagnosing linux issues with ipod syncing in Ubuntu

  - by alexpotato

  Issue: I am currently using Ubuntu 9.10 with a 5th generation Ipod 60 GB Black video classic. In general, it seems that Ubuntu can always detect the usb hd and displays it on my desktop. However, some applications seem to detect the ipod (e.g. Rythymbox and gtkpod do but Banshee does not) and some don't. I narrowed down the banshee issue to a bug that requires Nautilus to be restarted (although it would be nice to not have to do this). Also, Whenever I sync between these applications, it appears that everything is working fine during the sync but when I disconnect the ipod and browse, all of the songs seem to be there but the playlists are not. If I reconnect the ipod, in banshee specifically it sees the space usage as "other". What I am looking for is some way to at least understand what is and is not working OR directions to some where that can help me learn what's going on. I have already tried: -IRC. Either the channel is too general (e.g. #ubuntu) or no one is ever one (e.g. #banshee) -The web. Most of what I've found is too specific to one particular bug or too general. Any thoughts?

  Read the article

• Nexus functionality is limited after installation

  - by Dmitriy Sukharev

  I have a CentOS based server with Sonatype Nexus 2.0.4-1 installed. The issue is that there are no standard "Artifact Search", "Advanced Search", "Browse Index", "Refresh Index" Nexus features, as well as Artifact Information tab after selection of any artifact (only Maven Information tab). I tried to Google, but was amazed that there're no information about this issue. Actually it looks like all actions I've done are: wget http://www.sonatype.org/downloads/nexus-2.0.4-1-bundle.tar.gz tar -xvf nexus-2.0.4-1-bundle.tar.gz cp -r nexus-2.0.4-1 sonatype-work /opt/ ln -s /opt/nexus-2.0.4-1/* /opt/nexus ln /opt/nexus/bin/nexus /etc/init.d/ chmod 755 /etc/init.d/nexus vim /etc/init.d/nexus NEXUS_HOME=“/opt/nexus” RUN_AS_USER=“nexus” useradd -s /sbin/nologin -d /var/lib/nexus nexus chown -R nexus /opt/nexus/ chown -R nexus /opt/nexus-2.0.4-1/ sudo -u nexus cp /opt/nexus/conf/examples/proxy-https/jetty.xml /opt/nexus/conf/ To force Nexus be available through HTTPS I went to Administration - Server - Application Server Settings as admin and changed Base URL to https:// external IP/nexus and set Force Base URL to true. Any ideas how to get missed Nexus features?

  Read the article

• Unable to access my IIS website using hostname. Works fine with localhost

  - by rajugaadu

  I am unable to access my IIS website or even the default website. I did a bit of research and checked/selected the option 'Integrate Windows Authentication' in the Properties > Directory Service tab. From then on I could access the website using localhost. But when I use my hostname, it asks for domain username/password. Why is it so? I don't understand why am I not able to access my website without checking this option to integrate windows authentication? My goal is to access the website using both localhost and hostname. More details on what I did: I haven't done anything out of world. What I did is: IIS - Websites - Create new Website - Create a working folder - Set a default page. I restart this website and then click on browse. And I do not see my default page. I had to go to Directory Service tab and select the check box "Integrate Windows Authentication". Then I can see the default page coming. On IE too I can see the default page coming when I use http://localhost. But when I use http://{hostname} it asks for domain username and password. Why???

  Read the article

• Install self-signed certificate on local server (iis)

  - by ile

  On this page there are instructions on how to create self-signed cert (on apache) and how to install this certificate on server. I found this page (http://www.visualwin.com/SelfSSL/) with instructions on how to create self-signed certificate on windows (iis). I followed instructions and when I type https://myip/myapp (this leads to localhost because I set my router's port forwarding to go to localhost on my pc) this part works. From the first link, the most important part is this: What needs to be installed in IE is actually the Root CA Certificate. In the how-to above, the Root CA Certificate is called ca.crt. Copy this file to the server that is running QuickBooks. The following is for IE6: - Open IE - Tools - Internet Options - Content - Certificates - Trusted Root Certification Authorities Tab - Import, Next, Browse to 'ca.crt' - Next, Next, Finish, Close, OK The part that is missing in second link is that there is no instruction on how to get .crt file, so I tried to get it myself. What I did was following: I opened https://myip/myapp in Firefox and then "This Connection is Untrusted" screen appeared. Then I clicked on "Add Exception" and then below "Certificate Status" I clicked "View". Under the Details tab I clicked on Export and choosed Save as type: "X 509 Certificate (PEM)" and file was saved with .crt extension. Then I opened IE8 and followed above instructions. After opening https://myip/myapp in IE8 I always get warning screen. Does anyone knows what am I doing wrong? Thanks, Ile

  Read the article

• Can't connect to public WiFi with MacBookPro at coffee shops and libraries

  - by Nathan Bowers

  The Problem: I can't connect to public, unencrypted WiFi at my local public library or Peets Coffee. My Setup: Late 2006 MacBookPro running 10.5.8. I have Parallels installed. It's supposed to work like this: 1) Connect to their unencrypted WiFi network 2) Open a browser which redirects you to their "enter password/agree to terms" page. 3) Browse normally. I can connect to the WiFi network, but when I try to authenticate I always get stuck in a redirect loop. It's been like this for a while. Even before I upgraded to 10.5.8. I never have trouble with encrypted networks or regular open WiFi. What I've tried: Disabling Parallels connections in Network Prefs. Superstition: somehow Parallels installed something in the network stack that's messing me up. Pinging the IP address of the WiFi node I'm connected to. I can ping it, it's there, but I still get stuck in this authentication redirect loop. Tried different browsers, tried different cookie and security settings. Even tried IE under Parallels. No dice. Tried flushing DNS cache. Asked library and coffee employees for help. It didn't go well. My Question: Anybody else have this problem? What should I be looking for?

  Read the article

• IIS6 intranet site using integrated authentication fails to load when accessed externally

  - by maik

  I've developed a couple of internal sites for my organization that use integrated authentication. Ultimately we want these sites to be accessible externally to users with domain-joined computers. The sites work as expected on domain computers while on the internal network. The problem comes when I take my laptop home and try to access those sites. IIS only has integrated authentication enabled for the two sites. When I browse to the site using IE8 I get a username/password prompt asking for domain credentials. I can put those in and it will work, but the goal is to use the cached token for integrated authentication. Next I reasoned that IE wouldn't response to an integrated auth request (is NTLM the right term for this?) unless the site was trusted. I tried adding the site to Trusted Sites but I get the same behavior as the before. I then added the site to Local Intranet sites and that is where things get weird. I get a generic error page from IE, no error code or anything. Just for funsies I loaded up Firefox (which I had previously set up to use integrated authentication) and I added this new site to network.automatic-ntlm-auth.trusted-uris. Much to my surprise I was able to load the pages up with no problem at all and saw exactly what I was expecting (including verification that the integrated authentication worked). My mind is a bit boggled at the moment as I'm not really sure where to go from here. I was hoping some of you may be able to provide some insight.

  Read the article

• IIS 7.5 error 500 in fastcgi module after upgrading wordpress to 3.0.2

  - by Maniac13

  I am running multiple wordpress blogs on the following setup: Server 2008 R2; IIS 7.5; PHP 5.3.3; MySQL 5.0.7; I upgraded my wordpress install from 2.9.2 to 3.0.2 (on 2 different sites) today and the upgrade went fine. I can serve .php pages without errors, log into the admin system etc. I can browse my blog by going directly to mywebsite.com/index.php, but when I try to go to mywebsite.com (without the index.php) I get he below 500 error. I reset IIS, removed and re-attached the default document, but I am running out of ideas. Please if anyone has a solution for this that would be great. This is the 500 error I am getting: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP FastCGI Error Code 0x00000000 Requested URL http://mywebsite.com:80/index.php Physical Path D:\mywebsite.com\index.php Logon Method Anonymous Logon User Anonymous Thanks Stephan

  Read the article

• "Path Not Found" when attempting to write to a sub folder within a mapped drive

  - by Adam

  We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

  Read the article

• Server 2008 NAT Internet Not Working

  - by Jack

  I'm trying to set up Routing and Remote Access on Windows Server 2008 R2, I have a network connection that I want to share the internet from to another private network. The server has two NICs which are configured as follows: External NIC (Dynamically assigned by ISP) IP:10.175.4.150 Subnet:255.255.192.0 Gateway:10.175.0.1 DNS:10.175.0.1 Internal NIC IP:172.16.254.1 Subnet:255.255.255.0 Gateway:None DNS:None I have set the external NIC to be the public interface and enabled NAT on it in the RRAS MMC and set the internal NIC to be a private interface. I have also set up the DNS forwarding or whatever it is in the NAT section. From a client (IP:172.16.254.2) I can ping the server and access files on it, when I try to browse the web with the default gateway set to the internal NIC ip I end up getting a 404 page which is returned from the ISPs default gateway. I'm guessing it's something to do with the double NAT possibly. Trying to ping the ISPs default gateway from a private network client just times out as does accessing it directly. I've disabled and reconfigured RRAS multiple times and that doesn't seem to have made a difference, so can anyone tell me what I'm doing wrong? Thanks.

  Read the article

• What is the minimal steps to setup a client-server network using Windows Server 2008 R2 standard?

  - by Motivated Student

  Background I have One computer server with Win Server 2008 R2 standard installed but it has not been configured. This server has 2 LAN adapters. One adapter is connected to ISP and the other one connected to HUB/Switch. Other computers working as clients are connected to the same HUB/Switch to which the server is connected. IP Printers, IP scanners, IP camera are also connected to the same HUB/Switch. Note: I am a newbie. I only know how to plug RJ-45 sockets and assembly computer peripherals. I have no prior experience in Windows Server at all. Please teach me from the newbie's point of view. Objective I want to establish the following: Each client can access the internet, printers, scanners after it has been successfully authenticated by the server. Unauthenticated clients cannot access the internet, printers, etc. The server hosts a local site. Clients can browse internally using a private domain www.company.com. If the same domain name has been used by other on the internet, my private domain must override the public domain.

  Read the article

• IIS Manager - Connect to Another Server (Win7 to Win2008 server)

  - by Matt

  I am running Windows 7 Ultimate. If I open up IIS Manager, I see a list of "connections" on the left hand side. In previous versions, I would be able to select an option to "connect to another server" or "connect to another machine", but there is no such option visible anywhere here. The only thing in the list is my local machine. Even in the address bar, if I manually type in the server location (\servername, even tried just servername), nothing happens (it just reverts back to my current local computer) The documentation at http://technet.microsoft.com/en-us/library/cc732466%28WS.10%29.aspx seems to imply the very same steps... but there is just no button or menu option anywhere to do this. Am I missing something? I'm not even seeing a grayed out menu option. EDIT: Under the "File" menu, I see 2 options: Save Connections (grayed out) Exit Under the "Connections" pane, I see 1 button, grayed out. When I hover the mouse, it simply says "Up", appears to be usable if I browse into an element in my local computers IIS settings If I right click inside the pane itself, I see Refresh Add website (to the current host) Start Stop Rename Switch to Content View UPDATE: I downloaded and installed the Remote Server Administration tools from http://www.microsoft.com/downloads/details.aspx?FamilyID=7D2F6AD7-656B-4313-A005-4E344E43997D&displaylang=en, and I enabled everything listed under "Remote Server Administration Tools" under "Turn Windows Features On or Off". Still nothing.

  Read the article

• Can't ping my Window 7 machine from within a Windows XP virtual machine

  - by Jonathan Conway

  I have Windows 7 installed as my primary operating system, on a laptop that's on my home network (wireless). I'm using Microsoft Virtual PC 2007 SP1 to run a virtual machine of Windows XP SP3, in which I want to access the Windows 7 instance, both to browse a shared folder and access the local Apache server. So far I can ping my Windows 7 IP address (IPv4) and access the apache server through the web browser through HTTP. However using my machine name never seems to work. Pinging it fails, and I can't access my apache server using it either. The problem seems to be something to do with my machine's name being registered under IPv6 rather than IPv4. I'm at a loss what to do. Should I try to set up IPv6 on the virtual machine? Not sure how to go about that. Or maybe I should somehow get my machine name on Windows 7 to work with IPv4? Although I think it already does, because I can ping it from a separate box (running Ubuntu), which is only registered under IPv6.

  Read the article

• IIS7 error config and remote errors

  - by Kev

  Certain IIS7/7.5 500.19 configuration errors only render on a browser running on the local server. This appears to happen regardless of whether I set <httpErrors errorMode="Detailed" existingResponse="PassThrough" /> in the system.webServer section of a site's web.config file (or even globally for that matter). For example, I had a developer who reported that he was just getting the generic IIS7 500 error page: This was happening even though he had the following configured in his web.config: <configuration> <system.webServer> <httpErrors errorMode="Detailed" existingResponse="PassThrough" /> </system.webServer> </configuration> If I browse to the site on the server itself I see (some sensitive info redacted): Would the reason for this be that if the web.config has errors it therefore can't be parsed. Because it can't be parsed the local <httpErrors> setting doesn't get read and thus causes IIS to revert to default settings (i.e. DetailedLocalOnly)? Update: @LazyOne - suggested setting the above config at the server level which I already tried. This resulted in just raw 500 errors:

  Read the article

• Upgrading Visio 2000 to Visio 2007

  - by dirtside

  I have Microsoft Visio 2000 SR 1, and recently purchased Microsoft Office Visio Standard 2007 with the understanding (supported by the product info and some other research) that I'd be able to upgrade. However, when I install 2007, it tells me it can't find a previous install of Visio, but... it's right there! Here's the exact message: "Setup can't find a version of Microsoft Office on your computer. If Office is installed on a disk or network share, click the browse button to select the appropriate disk or share... (etc.)" No matter which directory or drive I pick (various Office installs, the old Visio install, various subdirectories) it gives the following message: "The path you have chosen does not point at a qualifying upgradeable product. Click 'Retry' to try again or 'Cancel' to quit setup." Any ideas? This is a legit copy of Visio 2007 (purchased from Amazon) and the copy of Visio 2000 is legit as well. I'm not sure what exactly the installer is looking for that it would consider a "qualifying upgradeable product". A specific file?

  Read the article

• Installing Tomcat on CentOS 5

  - by andybaird

  Disclaimer: I am not a server admin, I am a windows user that has lead a life of sinful installation wizards and drag and drop I'm attempting to install Tomcat on CentOS 5 hosted by a MediaTemple dedicated virtual server. I basically followed this guide: Installed jpackage and configured the yum.repo.d jpackage file to set enabled=1 Used yum to install java (yum install java) Downloaded the binary distribution of tomcat with "wget http://archive.apache.org/dist/tomcat/tomcat-6/v6.0.14/bin/apache-tomcat-6.0.14.tar.gz" set JAVA_HOME to point at the jdk location I found with "export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/" I gunzip/untar the Tomcat files and run ./startup.sh to start the Tomcat server. That is supposed to put the Tomcat server at myserver.com:8080 - however, I just get a could not contact host error when I try to browse to it (or when I try 'curl localhost:8080' from SSH) After I type ./startup.sh, here is the console output: [root@myserver bin]# ./startup.sh Using CATALINA_BASE: /root/apache-tomcat-6.0.14 Using CATALINA_HOME: /root/apache-tomcat-6.0.14 Using CATALINA_TMPDIR: /root/apache-tomcat-6.0.14/temp Using JRE_HOME: /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/ [root@myserver bin]# Is there a step I have missed here? Edit: I've now discovered by looking at the log the following error is occuring: Error occurred during initialization of VM Could not reserve enough space for object heap

  Read the article

• Vista WHS Client stopped resolving local names

  - by andrewcr

  I’m running Windows Home Server PP2 in my home, with 3 client computers: two XP and one Vista. I have a router that provides my local DHCP and the server has a static IP address. The other day the Vista machine hung, and on reboot stopped resolving local names. It will show the green home server client icon in the system tray, but if I attempt to log in to the console, I get a “This computer cannot connect to your home server” message. If I ping the server name from the command line, it does not resolve, and gives a “could not find host” message. Oddly enough, if I browse the network, I can see the server, but double clicking on it fails. The other machines on the local network have no problems seeing the server, and the Vista machine has no problems resolving names from the internet, it just can’t see any local machines. I’m aware that I can work around this by adding entries to my HOSTS file (it does work), but I’d like this to work the way it’s “supposed” to. I’m an experienced computer user and developer, but not a networking whiz. Can anyone tell me how local name resolution is supposed to work in my environment and/or suggest ways to troubleshoot this? Thanks, Andy

  Read the article

• Possible DNS issue after a reinstall of Windows Server 2000 (get off my lawn)

  - by cop1152

  I just replaced a drive on a Win2000 Server that replicates AD and issues out DHCP at one of our offices. I successfully joined it to the domain, setup range of IP's, etc, but am still having issues. I cannot RDC to it with name or IP. I can ping it, browse to it with Windows Explorer, and remote to it with some other software, but not RDC. The other issue is this: Users are unable to authenticate on it. They receive the message 'username or password incorrect' (or something like that). Changes made on the main domain controller seem to take forever to trickle down. The most significant entry in the DNS Server Log is Event ID 7062: The DNS Server Encountered a Packet Addressed to Itself. At least, I think its significant. The Directory Services Log shows numerous Event IDs 1265: The attempt to establish a replication link with parameters failed with the following status: The DSA operation is unable to proceed because of a DNS lookup failure. Does this make any sense to anyone? I feel like its something very simple that I am overlooking. Thanks in advance.

  Read the article

• Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

  - by techaddict

  Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

  Read the article

• Route traffic from one VPN to a second VPN

  - by Dominic

  I have set up an OpenVPN server on my windows 7 64-bit PC. I also have a subscription to a VPN service. My aim is to be able to connect my android phone to the VPN server on my PC, and then route all traffic through the VPN service. I have a NetGear WPN824 router. I can get it working if I my phone is on my local network. Then I can connect my phone to the VPN server using the local IP address of my PC. In Network Connection in the control panel, I share the connection used by the VPN service with the connection used by the VPN server. Then when I browse the internet on my phone, all traffic goes through the VPN service. Very nice. But if my phone is outside my local network, so I have to connect my phone to the local VPN using my PC's external IP address, then this method doesn't work. If I connect my PC to the VPN service and then try to connect my phone to my own VPN, it just doesn't connect (the initial TLS handshake times out). If I connect my phone to the local VPN first, then this connection is lost as soon as I connect my PC to the VPN service. Does anybody know how I can get this working? Many thanks Dominic

  Read the article

• Deleted vmware ESXi snapshot file - any way to recover?

  - by Mark Allison

  Hi there, I wanted to make some changes to a file server VM today on ESXi 4. The machine is a Debian Lenny guest with two virtual disks - one is 8GB and the other is 500Gb (data). In order to protect the machine from unwanted changes, I made a snapshot of the machine. I went ahead and made my changes and it didn't work out well. So, I powered off the VM and went into snapshot manager and reverted to snapshot. However I reverted to an older snapshot and not the one I just made by mistake. I then (idiotically) deleted the snapshot I just made in snapshot manager. This has resulted in me losing about one year's worth of data. Is there any way to recover this deleted snapshot file? I'm using vmware esxi 4. When I browse the VMWare repository I can see various vmdk files - is it possible the data I need is still there? What should I look for? Thanks, Mark.

  Read the article

• MediaWiki migrated from Tiger to Snow Leopard throwing an exceptions

  - by Matt S

  I had an old laptop running Mac OS X 10.4 with macports for web development: Apache 2, PHP 5.3.2, Mysql 5, etc. I got a new laptop running Mac OS X 10.6 and installed macports. I installed the same web development apps: Apache 2, PHP 5.3.2, Mysql 5, etc. All versions the same as my old laptop. A Mediawiki site (version 1.15) was copied over from my old system (via the Migration Assistant). Having a fresh Mysql setup, I dumped my old database and imported it on the new system. When I try to browse to mediawiki's "Special" pages, I get the following exception thrown: Invalid language code requested Backtrace: #0 /languages/Language.php(2539): Language::loadLocalisation(NULL) #1 /includes/MessageCache.php(846): Language::getFallbackFor(NULL) #2 /includes/MessageCache.php(821): MessageCache->processMessagesArray(Array, NULL) #3 /includes/GlobalFunctions.php(2901): MessageCache->loadMessagesFile('/Users/matt/Sit...', false) #4 /extensions/OpenID/OpenID.setup.php(181): wfLoadExtensionMessages('OpenID') #5 [internal function]: OpenIDLocalizedPageName(Array, 'en') #6 /includes/Hooks.php(117): call_user_func_array('OpenIDLocalized...', Array) #7 /languages/Language.php(1851): wfRunHooks('LanguageGetSpec...', Array) #8 /includes/SpecialPage.php(240): Language->getSpecialPageAliases() #9 /includes/SpecialPage.php(262): SpecialPage::initAliasList() #10 /includes/SpecialPage.php(406): SpecialPage::resolveAlias('UserLogin') #11 /includes/SpecialPage.php(507): SpecialPage::getPageByAlias('UserLogin') #12 /includes/Wiki.php(229): SpecialPage::executePath(Object(Title)) #13 /includes/Wiki.php(59): MediaWiki->initializeSpecialCases(Object(Title), Object(OutputPage), Object(WebRequest)) #14 /index.php(116): MediaWiki->initialize(Object(Title), NULL, Object(OutputPage), Object(User), Object(WebRequest)) #15 {main} I tried to step through Mediawiki's code, but it's a mess. There are global variables everywhere. If I change the code slightly to get around the exception, the page comes up blank and there are no errors (implying there are multiple problems). Anyone else get Mediawiki 1.15 working on OS X 10.6 with macports? Anything in the migration from Tiger that could cause a problem? Any clues where to look for answers?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >