Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 65/170 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Routing table change to access Internet over mifi

  - by Randall Blake

  I have two networks at home. One uses a Verizon mifi wireless on 192.168.1.1. The other uses a dlink router on 192.168.0.1. I have one laptop with two nics, one wireless and one not. The wireless nic connects to the mifi. The Ethernet nic connects to the dlink router. It's ip is 192.168.0.2. I also have a laptop with only one nic connected to the dlink on 192.168.0.3. I want to connect laptop 2 to the Internet. Can I do that by adding an entry to the routing table so that destination 0.0.0.0 routes to 192.168.0.2? If I do that, will laptop 1 "know" that it should route traffic from 192.168.0.3 to 192.168.1.1? Thanks for any assistance.

  Read the article

• Win 2003 STD network adapter always showing DHCP when in static IP configuration, + it loses the DNS

  - by Darragh

  Hi, I have a server that after the first configuration it was DHCP, now I have added it to our domain and in a static IP, however after a few moments it returns to DHCP but with only some of the IPv4 setting staying the same, It loses DNS for example. I'm not sure what is causing the problem but all I know is this started to happen after I added it to the domain, Would it be a domain policy? or the NIC drivers Spec; Dell M605 Blade server Windows 2003 STD SP1 Intel Xeon Quad core NIC: Dual embedded Broadcom NetXtreme IITM 5708 Gigabit Ethernet NIC w/ TOE

  Read the article

• Comunication from Server to Client + Client LAN

  - by Filipe YaBa Polido

  I'm having some trouble with some network setup. I've tried OpenVPN, SocialVPN, Hamachi, still it is not working. This is my setup: Server A: NIC 1 with internet public address, NIC 2 to LAN Client B PC: NIC 1 (192.168.10.2) connects to router 192.168.10.1 Client B Device: 192.168.10.3 (Configured via software, can't do much here) Problem: Server A must connect to cliente device B. (I can install software needed at Client B PC). However... I can't change the router to some model with VPN like Draytek or Cisco :( OpenVPN fails at bridging, PC B can ping Server A, but Server A can't ping Device B, only PC B. What else can I do?!?!?

  Read the article

• Routing between two subnets. (Need Solution)

  - by rehanplus

  Need help according to scenario given: Client end PCs: 400 + Network : Server 1 (Linux) : 192.168.2.0/24 (For Application, Internet not working) GW: 192.168.2.1 Clients: 192.168.2.1 - 254 Server 2 (Linux) : 192.168.3.0/24 (For Internet users) GW: 192.168.3.1 Clients: 192.168.3.2 - 254 Server 2 is connected to DSL Broadband. Server 1 and Server 2 both are on same physical network i.e. Same switches. Current issue: i have to deploy a file and print server but this server will be accessed by both (192.168.2.x and 192.168.3.x) one same workgroup. as both subnets are on same switched network. Limitations: Currently there is no hardware routers and firewall. Need to complete this task with Linux / Windows / AD. Tested / Worked so far: Configured one PC with two NIC's With the IPS: NIC 1 : 192.168.3.2 GW: 192.168.3.1 Subnet: 255.255.255.0 NIC 2 : 192.168.2.2 GW: Empty Subnet: 255.255.255.0 Kindly provide any solution what should i do to get sharing enable on both Subnets. Thank you All

  Read the article

• Windows 7 with two network cards doesn't route traffic

  - by Tomek

  I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

  Read the article

• Conflicts between 2 NICs

  - by funbi_grace

  Hi, I have an HP server (Windows server 2003) with 2 external NICs (couldn't get the builtin NIC to work). One is for an internal network of 4 PCs and the other is for part of an Internet-facing network. Many times a day, we have to disable the internal NIC in order to get the other NIC to see the network. I know this is happening on a server, but the issue is more related to the conflicts on the NICs. Any suggestions from the community on where to look for a solution?

  Read the article

• Routing between two networks on linux?

  - by gGololicic

  I got stuck with one problem I cant find solution. I have linux pc with two NIC. first nic (eth1) is connected to public ip (probably switch or whatever, doesnt really mater) so eth1 is connected to wan and another eth0 that I connected to switch and make it a lan nic. configuration: eth1 ip address 88.200.1xx.xxx //xxx's are cuz of security reasons eth0 ip address 192.168.1.1 wan ------ [eth1 (linux PC) eth0]<----[switch]<---- [eth1 (PC1)] Now I want to connect this two networks, so PC1 can access linux PC and wan. I think I know how to do it but I cant confiugre it right. This is what I tried: I turend on ip forwarding (for sure) I set eth1 default gw to the right ip on the wan I tried to set eth0 default gw to the same ip (but i couldnt) What or how can I do this, I was trying with linux route command, but I got stuck. Please help.

  Read the article

• Broadcasting an intent to a specific component.

  - by Nic Strong

  I have an activity that is starting a background operation in another service. This activity receives various notifications from this service. As part of the intent I use to initiate the background operation I pass extra data with the context of my activity so the background service can broadcast intents back to me (the download service is a good example of this usage). So in the activity I use the following to attach the context: intent.putExtra(Intents.EXTRA_NOTIFICATION_PACKAGE, IntentTestActivity.this.getPackageName()); intent.putExtra(Intents.EXTRA_NOTIFICATION_CLASS, IntentTestActivity.class.getCanonicalName()); intent.putExtra(Intents.EXTRA_NOTIFICATION_EXTRAS, myContext); I register for the notifications in the activity: IntentFilter intentFilter = new IntentFilter(); intentFilter.addAction(Intents.ACTION_NOTIFICATION); intentFilter.addCategory(Intents.CATEGORY_COMPLETION); intentFilter.addCategory(Intents.CATEGORY_PROGRESSS); Intent intent = registerReceiver(receiver, intentFilter); In the background service I send notifications with the following code: void broadcastNotification(String action, String category, String packageName, String className, String extras, int operationResult) { Intent intent = new Intent(action); intent.addCategory(category); intent.setClassName(packageName, className); if (extras != null) { intent.putExtra(Intents.EXTRA_NOTIFICATION_EXTRAS, extras); } intent.putExtra(Intents.EXTRA_OPERATION_RESULT, operationResult); context.sendBroadcast(intent); } My problem is that the above broadcast will never be received. If however I comment out the line intent.setClassName(packageName, className); Then the broadcast is received. Is it a problem with my filter? Do I have to specify intents intended for a specific component? Or cannot I not use such fine grain control over the delivery of broadcasts. Thanks, Nic

  Read the article

• fail2ban custom action to permanent ban IPs from China

  - by John Magnolia

  When a IP address gets banned how can I check if the banned IP address is from China. If yes, then add it to the permanent ban list. I have found this nice guide which write the banned IP to file. Reason: I am getting a lot of brute force attacks from China daily, thankfully fail2ban is helping restrict this although they appear to be getting worse and they are just changing their IP Address. Or even better would be if there was a maintained database of known hacker IP addresses. Example 1 Hi, The IP 60.169.78.77 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.77: % [whois.apnic.net node-7] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 2 Hi, The IP 60.169.78.81 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.81: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 3 Hi, The IP 222.133.244.99 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 222.133.244.99: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 222.133.244.96 - 222.133.244.127 netname: LCZFFHQ country: CN descr: liaochenggovermentfanghuoqiang admin-c: DS95-AP tech-c: DS95-AP status: ASSIGNED NON-PORTABLE changed: [email protected] 20060122 mnt-by: MAINT-CNCGROUP-SD source: APNIC route: 222.132.0.0/14 descr: CNC Group CHINA169 Shandong Province Network country: CN origin: AS4837 mnt-by: MAINT-CNCGROUP-RR changed: [email protected] 20060118 source: APNIC person: Data Communication Bureau Shandong nic-hdl: DS95-AP e-mail: [email protected] address: No.77 Jingsan Road,Jinan,Shandong,P.R.China phone: +86-531-6052611 fax-no: +86-531-6052414 country: CN changed: [email protected] 20050330 mnt-by: MAINT-CNCGROUP-SD source: APNIC Regards, Fail2Ban

  Read the article

• Odd 'UNION' behavior in an Oracle SQL query

  - by RenderIn

  Here's my query: SELECT my_view.* FROM my_view WHERE my_view.trial in (select 2 as trial_id from dual union select 3 from dual union select 4 from dual) and my_view.location like ('123-%') When I execute this query it returns results which do not conform to the my_view.location like ('123-%') condition. It's as if that condition is being ignored completely. I can even change it to my_view.location IS NULL and it returns the same results, despite that field being not-nullable. I know this query seems ridiculous with the selects from dual, but I've structured it this way to replicate a problem I have when I use a 'WITH' clause (the results of that query are where the selects from dual inline view are). I can modify the query like so and it returns the expected results: SELECT my_view.* FROM my_view WHERE my_view.trial in (2, 3, 4) and my_view.location like ('123-%') Unfortunately I do not know the trial values up front (they are queried for in a 'WITH' clause) so I cannot structure my query this way. What am I doing wrong? I will say that the my_view view is composed of 3 other views whose results are UNION ALL and each of which retrieve some data over a DB Link. Not that I believe that should matter, but in case it does.

  Read the article

• List all the months using oracle sql .

  - by Suresh S

  Guys is there any better way to list all the months other than this select to_char(add_months(to_date('01/01/1000', 'DD/MM/RRRR'), ind.l-1), 'MONTH') as month_descr , ind.l as month_ind from dual descr , ( select l from (select level l from dual connect by level <= 12) ) ind order by 2; ANSWER : SELECT to_char(add_months(SYSDATE, (LEVEL-1 )),'MONTH') as months FROM dual CONNECT BY LEVEL <= 12

  Read the article

• Oracle - pl sql selecting from SYS_REFCURSOR

  - by Einstein

  I have a function that returns a SYS_REFCURSOR that has a single row but multiple columns. What I'm looking to do is to be able to have a SQL query that has nested sub-queries using the column values returned in the SYS_REFCURSOR. Alternative ideas such as types, etc would be appreciated. Code below is me writing on-the-fly and hasn't been validated for syntax. --Oracle function CREATE DummyFunction(dummyValue AS NUMBER) RETURN SYS_REFCURSOR IS RETURN_DATA SYS_REFCURSOR; BEGIN OPEN RETURN_DATA SELECT TO_CHAR(dummyValue) || 'A' AS ColumnA ,TO_CHAR(dummyValue) || 'B' AS ColumnB FROM DUAL; RETURN RETURN_DATA; END; --sample query with sub-queries; does not work SELECT SELECT ColumnA FROM DummyFunction(1) FROM DUAL AS ColumnA ,SELECT ColumnB FROM DummyFunction(1) FROM DUAL AS ColumnB FROM DUAL;

  Read the article

• C#: ExecuteNonQuery() returns -1 when execute the stored procedure

  - by user1122359

  I'm trying to execute stored procedure in Visual Studio. Its given below. CREATE PROCEDURE [dbo].[addStudent] @stuName varchar(50), @address varchar(100), @tel varchar(15), @etel varchar(15), @nic varchar (10), @dob date AS BEGIN SET NOCOUNT ON; DECLARE @currentID INT DECLARE @existPerson INT SET @existPerson = (SELECT p_ID FROM Student WHERE s_NIC = @nic); IF @existPerson = null BEGIN INSERT INTO Person (p_Name, p_RegDate, p_Address, p_Tel, p_EmergeNo, p_Valid, p_Userlevel) VALUES (@stuName, GETDATE(), @address, @tel, @etel, 0, 'Student' ); SET @currentID = (SELECT MAX( p_ID) FROM Person); INSERT INTO Student (p_ID, s_Barcode, s_DOB, s_NIC) VALUES (@currentID , NULL, @dob, @nic); return 0; END ELSE return -1; END Im doing so by using this code below. SqlConnection con = new SqlConnection(); Connect conn = new Connect(); con = conn.getConnected(); con.Open(); cmd = new SqlCommand("addStudent", con); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.Add("@stuName", SqlDbType.VarChar).Value = nameTxt.Text.ToString(); cmd.Parameters.Add("@address", SqlDbType.VarChar).Value = addressTxt.Text.ToString(); cmd.Parameters.Add("@tel", SqlDbType.VarChar).Value = telTxt.Text.ToString(); cmd.Parameters.Add("@etel", SqlDbType.VarChar).Value = emerTxt.Text.ToString(); cmd.Parameters.Add("@nic", SqlDbType.VarChar).Value = nicTxt.Text.ToString(); cmd.Parameters.Add("@dob", SqlDbType.DateTime).Value = dobTime.Value.ToString("MM-dd-yyyy"); int n = cmd.ExecuteNonQuery(); MessageBox.Show(n.ToString()); But it returns me -1. I tried this stored procedure by entering the same values I captured from debugging. It was successful. What can be the possible error? Thanks a lot!

  Read the article

• Clustering for Mere Mortals (Pt 3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  Start with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• Clustering for Mere Mortals (Pt3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  IStart with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• No Option To Duel Boot Ubuntu 12.04 USB

  - by Jordan

  I have used universal usb installer on my HP probook 2000 on my Kingston data traveler (8GB). When I boot I select to boot from USB and then click on Install Ubuntu 12.04 LTS, I get to the partition part, but there is no option to keep existing Windows and dual boot. I only have Erase entire disk and something else. How can I get this dual boot to come up? Screen Shot Here I also cannot use a CD/DVD

  Read the article

• How to get HDMI sound work on a basic 12.04 install?

  - by Gubuntu

  I have just installed Ubuntu 12.04 (Precise) and am using it on my TV. The HDMI sound doesn't work. All I have installed is: The preinstalled codecs and other software, a KDE game called KsirK, Supertuxkart, and GIMP 2.8. I am using a custom built computer, and a LG TV. My processor is Pentium(R) Dual-Core CPU E5200 @ 2.50GHz dual core, OS is 32-bit, and I have 1.7GB of ram (after having to remove one stick due to failure).

  Read the article

• Hyper-V + RRAS NAT + Port Forwarding + RDP, can I get it all working together?

  - by Tom Bull

  I am running a Windows 2008 R2 server with various services running natively and two virtualised servers running on Hyper-V. The hardware server, I'm going to call it REAL1, has one external NIC, to which I can assign any of the following IP addresses: 1.2.3.4, 1.2.3.5, 1.2.3.6, etc... I need to achieve the following: I would like to be able to connect to REAL1 via remote desktop (RDP / port 3389) on one IP address (say 1.2.3.4), but also to the virtualised servers (I'm going to call them VIRTUAL1 and VIRTUAL2) on the other available IP addresses (say 1.2.3.5 and 1.2.3.6). The easiest way of doing this is to connect the virtual servers directly to the external interface and assign them each their own IP address. REAL1 will have 1.2.3.4, VIRTUAL1 will have 1.2.3.5 and VIRTUAL2 will have 1.2.3.6. Unfortunately, although I don't directly manage the two virtual servers, I have responsibility for their security. I would like to have some kind of firewall between the virtual servers an the internet. I have tried running a virtual machine firewall, but have found the performance on Hyper-V pretty terrible. The alternative I am now trying is Routing and Remote Access (RRAS): I have set up a virtual network called 'Internal' and REAL1 has a virtual network adapter connected to this virtual network I have connected each of the virtual servers to this network too I have assigned each server static IP addresses on this virtual network (REAL1 has 10.1.1.1, VIRTUAL1 has 10.1.1.2 and VIRTUAL2 has 10.1.1.3) I have installed RRAS and set up a NAT. The external interface is the external NIC, the internal interface is the virtual NIC connected to the internal network I have assigned all the available external IP addresses to the external NIC on REAL1. The virtual servers have been set up appropriately such that their default gateway is pointing to 10.1.1.1 and they can both access externally. Success! The RRAS is routing packets. The problem I have is that when I try to port forward services from the external IP address on REAL1, it only works if there is not already a service bound to the port. Remote desktop 'greedily' binds to every available IP address on port 3389 on REAL1 so I can't selectively forward incoming traffic for 1.2.3.5:3389 to 10.1.1.2:3389. RRAS will allow me to set up this port forwarding, and no errors come up. It just doesn't work. So the question I have is: Is there a better way of doing this? Or at least is there a way of resolving the apparant conflict between RRAS and everything else on the physical server?

  Read the article

• WinXP - Having trouble sharing internet with 3G USB modem via ICS

  - by Carlos Nunez

  all! I've been banging my head against a wall with this issue for a few days now and am hoping someone can help out. I recently signed up for T-Mobile's webConnect 3G/4G service to replace the faltering (and slow) DSL connection in my apartment. The goal was to put the SIM in one of my old phones and use its built-in WLAN tethering feature to share Internet out to rest of my computers. I quickly found out that webConnect-provisioned SIMs do not work with regular smartphones, so I was forced to either buy a 4G-compatible router or tether one of my old laptops to my wireless router and share out that way. I chose the latter, and it's sharpening my inner masochistic self by the day. Here's the setup: GSM USB modem (via hub), ICS host - 10/100 Mbps Ethernet NIC, ICS "guest" - WAN port of my SMC WGBR14N wireless router in bridged mode (i.e. wireless access point). Ideally, this would make my laptop the DHCP server and internet gateway with the WAP giving everyone wireless coverage. I can browse internet on the host laptop fine. However, when clients try to connect, they get a DHCP-assigned IP from the laptop and are able to use the Internet for a few minutes before completely dying. After that happens, they are able to re-associate with the WAP and get IP addresses, but are unable to use Internet or resolve IP addresses until the laptop and router are restarted. If they do get access, it's very, very slow. After running Wireshark on the host machine, it turns out that this is because every TCP connection keeps getting RST. DNS seems to work. I would normally think the firewall is the culprit here, but when it drops packets, it drops them completely. The fact that TCP connections are being ACK'ed by the destination rules that out. Of course, none of the event Log isn't saying anything about what's going on. I also tried disabling power management on the NIC, since that's caused problems in the past; that didn't help either. I finally disabled receive-side scaling as per a Microsoft KB (that applied to Windows Server 2003, SP2) to no avail. I'm thinking of trying it with a different NIC (will be tough; don't have a spare Ethernet NIC around for the laptop), but I'm getting the impression that this simply doesn't work. Can anyone please advise? I apologise for the length of this post; all contributions are much appreciated! -Carlos.

  Read the article

• HOSTS ignored when disconnected [closed]

  - by Synetech

  Problem I’m seeing a strange and extremely frustrating problem. Any system that is not connect to the Internet (Windows 7 shows the no Internet access icon because it cannot constantly ping Microsoft’s servers) cannot even access locally hosted servers. Hypothesis The problem appears to be that the HOSTS file is not being used to resolve DNS entries when there are no active NICs. Tests / Reproduction You can reproduce it as so: Disconnect a system from the Internet (make sure all wired and wireless connections are disconnected). If necessary, add an entry to the HOSTS file (e.g., 127.0.0.1 foobar or 127.0.0.1 foobar.com) Open a command-prompt Type ping foobar or ping foobar.com Observations The screenshots below show a clear and demonstrative example. In the first snap, a laptop is connected to a router wirelessly. The HOSTS file has only three entries and they resolve just fine. In the second snap, the wireless radio is turned off, so the entries in the HOSTS file are ignored. Moreover, notice that pinging localhost still works even without any active NICs (as does 127.0.0.1), but it is using the IPv6 address (must be hard-coded). You can see the same results in Windows XP with no IPv6 installed, so it has nothing to do with IPv6. I tried pining what should have resolved to 127.0.0.1 while the desktop system (with no wireless NICs) was connected via its Ethernet adapter, then again after pulling the cable from the router and waiting a couple of seconds, then again after plugging the cable back in. The same thing happens if instead of pulling out the cable, the NIC is disabled through software (the [Disable] button in the NIC’s Status dialog or via Device Manager). Conclusions It looks as though the HOSTS file is only being read and used if there is an active NIC, otherwise it is being ignored. This makes some sense in that if there are no active network adapters, then presumably there will not be any network activity, and thus no need to resolve host names via the HOSTS file. This assumption is specious however because it precludes locally hosted virtual servers. The HOSTS file should be used regardless of external DNS server connectivity, otherwise you cannot use simple/consistent/testing-production names for locally hosted servers when not connected to the Internet (for example web servers; help servers for Visual Studio, 3dsmax, etc.; and so on). Question Does anyone know how to force Windows to use the HOSTS file even if there are no active NICs? Appendix Figure 1: While the wireless NIC is connected to the router (the cable-modem is in standby, so no external Internet connectivity). Figure 2: With the wireless radio turned off (the Ethernet port is not unconnected in both cases). Figure 3: Same results in XP with no IPv6

  Read the article

• Only Listen For DHCP Requests On A Specific Interface

  - by Sean M

  How can I tell a Windows 2003 R2 server, which has multiple NICs, "listen for DHCP requests on NIC #1, ignore DHCP requests on NIC#2" ? The server is in a gateway role, connecting two networks, and I don't understand how to get it to be a DHCP server only for the "downstream" network.

  Read the article

• Corosync :: Restarting some resources after Lan connectivity issue

  - by moebius_eye

  I am currently looking into corosync to build a two-node cluster. So, I've got it working fine, and it does what I want to do, which is: Lost connectivity between the two nodes gives the first node '10node' both Failover Wan IPs. (aka resources WanCluster100 and WanCluster101 ) '11node' does nothing. He "thinks" he still has his Failover Wan IP. (aka WanCluster101) But it doesn't do this: '11node' should restart the WanCluster101 resource when the connectivity with the other node is back. This is to prevent a condition where node10 simply dies (and thus does not get 11node's Failover Wan IP), resulting in a situation where none of the nodes have 10node's failover IP because 10node is down 11node has "given back" his failover Wan IP. Here's the current configuration I'm working on. node 10sch \ attributes standby="off" node 11sch \ attributes standby="off" primitive LanCluster100 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.100" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive LanCluster101 ocf:heartbeat:IPaddr2 \ params ip="172.25.0.101" cidr_netmask="32" nic="eth3" \ op monitor interval="10s" \ meta is-managed="true" target-role="Started" primitive Ping100 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive Ping101 ocf:pacemaker:ping \ params host_list="192.0.2.1" multiplier="500" dampen="15s" \ op monitor interval="5s" \ meta target-role="Started" primitive WanCluster100 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.100" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive WanCluster101 ocf:heartbeat:IPaddr2 \ params ip="192.0.2.101" cidr_netmask="32" nic="eth2" \ op monitor interval="10s" \ meta target-role="Started" primitive Website0 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf" options="-DSSL" \ operations $id="Website-one" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" primitive Website1 ocf:heartbeat:apache \ params configfile="/etc/apache2/apache2.conf.1" options="-DSSL" \ operations $id="Website-two" \ op start interval="0" timeout="40" \ op stop interval="0" timeout="60" \ op monitor interval="10" timeout="120" start-delay="0" statusurl="http://127.0.0.1/server-status/" \ meta target-role="Started" group All100 WanCluster100 LanCluster100 group All101 WanCluster101 LanCluster101 location AlwaysPing100WithNode10 Ping100 \ rule $id="AlWaysPing100WithNode10-rule" inf: #uname eq 10sch location AlwaysPing101WithNode11 Ping101 \ rule $id="AlWaysPing101WithNode11-rule" inf: #uname eq 11sch location NeverLan100WithNode11 LanCluster100 \ rule $id="RAND1083308" -inf: #uname eq 11sch location NeverPing100WithNode11 Ping100 \ rule $id="NeverPing100WithNode11-rule" -inf: #uname eq 11sch location NeverPing101WithNode10 Ping101 \ rule $id="NeverPing101WithNode10-rule" -inf: #uname eq 10sch location Website0NeedsConnectivity Website0 \ rule $id="Website0NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 location Website1NeedsConnectivity Website1 \ rule $id="Website1NeedsConnectivity-rule" -inf: not_defined pingd or pingd lte 0 colocation Never -inf: LanCluster101 LanCluster100 colocation Never2 -inf: WanCluster100 LanCluster101 colocation NeverBothWebsitesTogether -inf: Website0 Website1 property $id="cib-bootstrap-options" \ dc-version="1.1.7-ee0730e13d124c3d58f00016c3376a1de5323cff" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1408954702" \ maintenance-mode="false" rsc_defaults $id="rsc-options" \ resource-stickiness="100" \ migration-threshold="3" I also have a less important question concerning this line: colocation NeverBothLans -inf: LanCluster101 LanCluster100 How do I tell it that this collocation only applies to '11node'.

  Read the article

• How Windows Server routes PTP v2 unicast messages?

  - by Bobb

  If my server is placed in PTP v2 enabled network which has grand master clock. And the switch is PTP aware. The server is W2008R2 (soon to be W2012). I also have PTP v2 software client. How does the master clock messages are getting on with Windows Server? Does it need special PTP-aware NIC or it will be treated as normal networking traffic and the software receives it through regular NIC no problem?

  Read the article

• Forward RDP Connection from Server to Client

  - by Theveloper

  What I'm trying to achieve is in the following infrastructure: Server A running ADDS, DNS, DHCP, NPS LAN -Computer Client I -Computer Client II Server A NIC 1 goes to LAN Server A NIC 2 goes to Internet Server A provides DHCP and Internet access for Computer Clients How do I connect to Computer Client I or II through RDP from outside the network? Even when using credentials from Computer Client I (which are not in ADDS) the connection still only goes to the server.

  Read the article

• How do I configure a guest VM's static IP address automatically in Citrix XenServer?

  - by Kev

  To facilitate automation of guest VM provisioning, how do I set (in a script) the IP address on a guest VM's NIC (or NIC's) once a new VM has booted? Is there a way to "inject" netsh commands via the Citrix guest OS tools (for Windows for example) once the host has started? Or can this be done via the Citrix API/SDK or the xe tools? These are windows 2008 servers that have been sysprep'd so when the boot for the first time they have no IP address.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >