Search Results

Search found 4241 results on 170 pages for 'dual nic'.

Page 67/170 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74 | Next Page >

Access All VLANS over XenServer Interface

- by Garrett

For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access both tagged and untagged traffic in order to route traffic. Here's the problem: 1) If I bind the NIC in XenCenter to the VM (which has no VLAN ID associated with it), the VM cannot see any tagged traffic. I have verified this using tcpdump. However, the tagged traffic is flowing into the XenServer machine perfectly fine. 2) I have more than 7 VLANs, so adding each VLAN as an interface within XenCenter isn't an option. 3) Even though tcpdump shows no tagged traffic coming in the VMs NIC, I have tried adding VLAN interfaces within Vyatta. This also doesn't work. I have tried using both Linux bridge and openvswitch setups and neither seem to work. I am running XenServer 6.0.3 free and Vyatta VC6.3. Please help! I've run out of ideas. I've googled for hours and can't seem to find anything.

Read the article
TeamCity EC2 Integration via ISA Server

- by Tim Long

I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

Read the article
Openfiler iSCSI performance

- by Justin

Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

Read the article
How to redirect all Internet traffic to OpenVPN Server

- by JuliaS

I have seen working solutions around the issue of forcing Internet traffic to go through the OpenVPN server but they are all done in Linux, all I want to know is how to add an entry to the route table in windows to make this happen. connectivity between the client and server is fine, my Windows 7 client can establish a connection to the Windows 2008 Server, but when established Internet traffic is still going from the local Windows 7 machine. Here are the details: Server: Windows 2008 Server with one NIC OpenVPN IP Address: 192.168.0.1 Local NIC IP Address (connects the server to the Internet): 10.242.69.107 Client: Windows 7 with one NIC OpenVPN IP Address: 192.168.0.2 ISP allocated IP Address: 10.0.8.2 (gateway 10.0.8.1) Server OpenVPN Config: dev tun ifconfig 192.168.0.1 192.168.0.2 secret static.key push "redirect-gateway def1" Client OpenVPN Config: remote xxx.xxx.com dev tun ifconfig 192.168.0.2 192.168.0.1 secret static.key I'm not an expert with adding routes...etc. I would be grateful if someone could let me know how to add this entry in my server/client route table. EDIT: Output from the client's netstat -rnv IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.0.8.1 10.0.8.2 20 10.0.8.0 255.255.255.252 On-link 10.0.8.2 276 10.0.8.2 255.255.255.255 On-link 10.0.8.2 276 10.0.8.3 255.255.255.255 On-link 10.0.8.2 276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.252 On-link 192.168.0.2 286 192.168.0.2 255.255.255.255 On-link 192.168.0.2 286 192.168.0.3 255.255.255.255 On-link 192.168.0.2 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.0.8.2 276 224.0.0.0 240.0.0.0 On-link 192.168.0.2 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.0.8.2 276 255.255.255.255 255.255.255.255 On-link 192.168.0.2 286 ===========================================================================

Read the article
Why are they putting "processors" on hard drives?

- by Celeritas

What does it mean when they have a processor on the hard drive, how does it work, and what benfit does it have? I don't understand - the CPU is the processor and the hard drive transfers it's contents to RAM. Do have additional processors, preprocess the data some how? Here's some examples Western Digital WD Black WD1002FAEX 1TB "Dual processor speed" NETGEAR ReadyNAS 312 2-Bay Diskless Network Attached Storage "Dual-core Intel 2.1GHz processor and 2GB on-board memory" and routers now have processors too, why's that nescecary? I guess it sort of makes sense - some logic needs to happen for the packets to be read in to know which ports to send them out on, but why did old routers not need them? Example or wireless router with processor: "Dual-core processor"

Read the article
Which type of DVI cable will connect the 9400GT with this display?

- by Senthil

I am going to buy BenQ G2220HD 22" LCD display I already have an EVGA GeForce 9400GT. Both support DVI. But the confusion came when I wanted to buy a DVI cable. I am confused with DVI and DVI-D and DVI-I and then Single link and Dual link! Can someone tell me whether this cable can be used to connect my 9400GT to my BenQ display? If not, what kind of DVI cable should I buy - DVI, DVI-D, single link, dual link, DVI-I?? Basically, geforce docs say it is a dual link dvi capable one. my benq display docs say it is dvi-d. what are my options now? what kind of dvi cable should I get? Please don't give me brands, because most of them won't be here in India. Just tell me the TYPE of DVI cable.

Read the article
Issues with sustained traffic with PFSense

- by Farseeker

Last week we had to replace our PFSense firewall because it had a catastrophic hardware failure. All but one of the NICs were taken out of the old server and put into the new one. The one NIC that was not moved was the LAN NIC as this is on-board. The other NICs are all WAN connections and the must all be present (i.e. I can't disable one just for the sake of testing) After re-installing PFSense and restoring our backup of the configuration, everything came back online just fine, however on the new hardware any download that takes longer than about 10 seconds just times out in the middle. Example 1: Downloading from Microsoft.com goes at about 900k/sec and times out after about 10 seconds (thus, just under 10Mb of content) Example 2: Downloading from cnet.com goes at about 300k/sec and times out after about 10 seconds (thus, about 3Mb of content). By times out, I mean that the download just stops, and you have to pause/resume to get the next part done, repeat and rinse until the download is complete. However it's not consistant, sometimes it's 10 seconds, sometimes it's 4 seconds, and it sometimes you can't even load a heavy HTML page because the page never finishes. I assume this is most likely because PFSense does not like the onboard NIC, as this is the primary difference between the two servers. It's recognised as NFE0, and there's no room in the server for any more NICs and I don't have any dual-port NICs handy to experiment with a different LAN connection. I've never had to troubleshoot this sort of issue before. Can anyone give me some pointers about where to start? Linux is not my forte so please be kind!

Read the article
Hints on diagnosing performance issue in OpenBSD firewall

- by Tom

My OpenBSD 4.6 pf firewall has started having really bad performance in the past few weeks. I've isolated the firewall (as opposed to the WAN connection, switch, cable, etc.) as the problem, but need a hint on how to further diagnose or fix the problem. The facts: Normal setup is: DSL Modem - FW Ext. NIC - FW Int. NIC - Switch - Laptop Normal setup described above gives only 25 Kbps! Plugging the laptop straight from the DSL modem gives a 1 MBps connection (full speed, as advertised). Therefore, the DSL connection seems to be OK. Plugging the laptop directly into the firewall's internal NIC (bypassing the switch) also gives only 25 Kbps. Therefore, the switch does not seem to be a problem. I've replaced the ethernet cables, but it didn't help. Here's the weird thing. Reloading the ruleset (/sbin/pfctl -Fa -f /etc/pf.conf) causes the laptop's connection to go up to 1 Mbps (i.e. full speed) for a few minutes before it gradually degrades back down to 25Kbps again. Any ideas on what's wrong or how I could further diagnose the problem?

Read the article
why adding router will hide all share folders

- by user1285419

I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

Read the article
Performance difference between MacBook Pro (2.8 GHz) vs Air (1.7 GHz)?

- by jonathanconway

I'm comparing these two Apple laptops: MacBook Pro (13", 2011 model): 2.8GHz dual-core Intel Core i7 processor with 4MB shared L3 cache 4GB (two 2GB SO-DIMMs) of 1333MHz DDR3 SDRAM AMD Radeon HD 6770M graphics processor with 1GB of GDDR5 memory on 2.4GHz configuration MacBook Air (13", 2011 model): 1.7GHz dual-core Intel Core i5 with 3MB shared L3 cache 4GB of 1333MHz DDR3 onboard memory Intel HD Graphics 3000 processor with 384MB of DDR3 SDRAM shared with main memory There's definitely a gap between them in terms of CPU speed and graphics, but what practical difference would this make on a day-to-day basis? On the one hand, I love the sleek, thin appearance of the Air. On the other hand, I don't want a machine that's going to be dog-slow when doing tasks such as running Virtual Machines, dual-booting to Windows and running multiple instances of Visual Studio, and maybe some light gaming. Is there going to be a major difference that makes the MacBook Pro a more attractive purchase?

Read the article
ProCurve 1800 switch issue

- by user98651

I recently deployed ProCurve 1800-24G switches in place of some older ProCurve 2424M switches in my network. However, I'm having a serious problem with the switch connected to the router. It seems, every night when our Windows 2008 R2 server (off site) runs a backup to a iSCSI target (on site) [facilitated through a PPTP tunnel] the LAN loses connectivity with the router. To clarify, there is only one router which is connected to the switch affected by this problem. The only way to resolve the issue is to either reboot the router or pull the ethernet cable that goes to the router and plug it back in. During the outage, clients cannot receive DHCP requests, DNS requests, ping, or do anything else with the router in this state. Now, neither the switch or router are configured extensively and the issue only seems to have surfaced with the new switch in place. I have tried a number of things including replacing cables, rebooting and checking the switch configuration (it is literally as basic as you can get at this point-- flat LAN, no trunking). Interestingly, the router shows (accessed externally) no changes in configuration or status during this state but similarly cannot ping or access other hosts on the network. This issue occurs in different stages of backup (ie, different amounts transferred). I've also dumped packets from the switch into WireShark but cannot seem to find any anomaly yet (I'm looking at packets around the time the issue appeared and at the time when I reset the NIC). Any suggestions for what to look for? Ideas on what could be causing this? I'm seeing some transmit/receive errors on the NIC from both the router and switch side but nothing serious when compared to the total packet counts. I'm seriously doubting hardware at this point, as I have tried another switch, different cables, and a different NIC on the router.

Read the article
MS DNS lookup issue

- by 3molo

Hi, Got two AD/DNS servers, and on the secondary I can't seem to lookup the external site www.iis.se (or any other hostname that their name servers control). The central firewall at this office allows any any outbound, tcp and udp. The DNS server has no local firewall nor antivirus. My windows client, located in the same subnet as the DNS server can do the lookup by asking the nameservers that are in control of www.iis.se. 'dig NS iis.se' shows iis.se. 2517 IN NS ns2.nic.se. iis.se. 2517 IN NS ns.nic.se. iis.se. 2517 IN NS ns3.nic.se. on AD/DNS server C:\Users\Administratornslookup www.iis.se 212.247.7.228 Server: UnKnown Address: 212.247.7.228 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 194.17.45.54 Server: UnKnown Address: 194.17.45.54 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 212.247.3.83 Server: UnKnown Address: 212.247.3.83 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 And still: C:\Users\administratornslookup www.iis.se Server: UnKnown Address: 127.0.0.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. * Request to UnKnown timed-out

Read the article
ISC DHCPD IPv6 for multiple interfaces

- by Seoman

I want to assign multiple IPv6 to a server with multiple NIC. As IPv6 RFC defines, each server has a unique DUID that can have one of the 3 formats (LL, LLT or enterprise). And each NIC has an IAID. So a request from NIC1 its the DUID and the IAID of the NIC1 and the request from NIC2 its the same DUID but the IAID its different. The problem is that from a Centos box, when I ask for an IP in 2 different interfaces, I get the same IP. I can't find how to specify host entry based on DUID and the IAID. I see some people generating a unique DUID based on the MAC of the NIC but this is not IPv6 RFC says. What I tried is: host entry1 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:09:40:5d"; fixed-address6 2001:db8:0:1::202; } host entry2 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:7e:c9:ec"; fixed-address6 2001:db8:0:1::201; } This causes a Segmentation Fault in the client (what is scary...). I guess is not the right use for ia-na option but I don't see any other option.

Read the article
2 subnets off of 1 PC with 2 NICs

- by Jeff

I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

Read the article
Very Slow DSL (ethernet) speed

- by Abhijit

I 'was' on opensuse 12.2 when my dsl speed was normal. Yesterday I switched from opensuse to ubuntu 12.04 and speed decreased. It came to range of 7-10-13-20-25-kbps. Then I switch to linux mint, and then to fedora. Still slow speed. When I was in ubuntu I disabled ipv6 but still no luck. Now I am in fedora but this time with DIFFERENT ISP. And still I am getting very slow sped. So my guess is this is nothing to do with os. What can be wrong? Is this problem of NIC? Does NIC speed decreases over time? Does NIC life ends over time as with keyboard or mouse? Help please All the os I used are 64 bit and my laptop is Compaq Presario A965Tu Intel Centrino DUal Core. Interesting thing to notice is I get normal speed while downloading torrent inside torrent client softwares. This slow speed issue applied to download from any web browser or installing software using terminal.

Read the article
DVI-D Splitter Not Working with GeForce 8400gs

- by jimdrang

I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

Read the article
Difference between “system-on-chip” and “CPU”

- by Tim

Very confused, in some websites, they have this line: iPhone 5s CPU: Apple A7 other websites saying that: iPhone 5s System-on-chip: Apple 7 CPU: 1.3 GHz 64bit dual core other sources saying that iPhone 5s System-on-chip: Apple 7 CPU: 1.3 GHz 64bit dual core Apple 7 In Wikipedia, it said: The Apple A7 is a 64-bit system on a chip (SoC) designed by Apple Inc. It first appeared in the iPhone 5S, which was introduced on September 10, 2013. Apple states that it is up to twice as fast and has up to twice the graphics power compared to its predecessor, the Apple A6. While not the first 64-bit ARM CPU, it is the first to ship in a consumer smartphone or tablet computer. There are 2 sentences: The Apple A7 is a 64-bit system on a chip (SoC) and While not the first 64-bit ARM CPU Wikipedia also said “The A7 features an Apple-designed 64-bit 1.3–1.4 GHz ARMv8-A dual-core CPU, called Cyclone”. So System on chip is also CPU? very confused

Read the article
Oracle Linux Delivers Top CPU Benchmark Results on Sun Blades

- by sergio.leunissen

From the Performance and Best Practices blog: Fresh SPEC CPU2006 results for Sun Blade X6275 M2 Server Modules running Oracle Linux 5.5. The highlights: The dual-node Sun Blade X6275 M2 server module, equipped with two Intel Xeon X5670 2.93 GHz processors per node and running the Oracle Enterprise Linux 5.5 operating system delivered the best SPECint_rate2006 and SPECfp_rate2006 benchmark results for all systems with Intel Xeon processor 5000 sequence. With a SPECint_rate2006 benchmark result of 679, the Sun Blade X6275 M2 server module, with two compute nodes per blade, delivers maximum performance for space constrained environments. Comparing Oracle's dual-node blade to HP's dual-node blade server, based on their single node performance, the Sun Blade X6275 M2 server module SPECfp_rate2006 score of 241 outperforms the best published HP ProLiant BL2X220c G5 server score by 3.2x. A single node of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 37% improvement in SPECint_rate2006 benchmark results and 22% improvement in SPECfp_rate2006 benchmark results compared to the previous generation Sun Blade X6275 server module. Both nodes of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 59% improvement on the SPECint_rate2006 benchmark and 40% improvement on the SPECfp_rate2006 benchmark compared to the previous generation Sun Blade X6275 server module.

Read the article
Huwawei E220 broadband dongle not working

- by Roshnal

The problem is, I have used Ubuntu from 6.10 upto 11.10. And upto 11.04 I used my same USB 3G dongle to connect to broadband and it worked fine. But 2 days ago I upgraded to Ubuntu 11.10 and broadband is not working. It detects my dongle and creates a connection without a problem, but when connecting it just keeps on and on for a long time and then say I'm offline. So I did a clean install and the same thing occurred. But I also have a netbook and its got Ubuntu 11.10. I tried using the same dongle for internet on that netbook and it worked fine without any issues. But this isn't a problem with my USB port on my main machine or something like that because I'm also using Windows on my main machine (dual-boot) and its working fine. My hardware: Main computer (one that I'm trying to connect): 2.8GHz dual core Intel 2GB RAM 500GB Sata II HDD 384MB Video Memory (Intel G31/G33 chipset) Ubuntu 11.10 (32bit) My NetBook (broadband working fine): 1.6GHz Intel Atom (dual core) 1GB DDR3 RAM 250GB HDD 128MB Video Memory (Intel something-I-can't-remember) Ubuntu 11.10 (32bit) My dongle is a Huawei E220 and ISP is Dialog GSM (I'm in Sri Lanka) So any idea why this is? I really love Ubuntu and this is bugging me off.. Any help greatly appreciated. Regards, Roshnal

Read the article
I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS.

- by Liath

I am attempting to install Ubuntu on a box which was previously running Windows 7. I have also experienced the dreaded "Unable to install GRUB" error. I am not attempting to dual boot. I have previously run a Windows boot disk and removed all existing partitions. If I run the Ubuntu 12.04 install CD and click install after the config screens, I get the error Executing 'grub-install /dev/sda' failed. This is a fatal error. (It is the same error as this question: Unable to install GRUB) All the questions I've read while looking for a solution are related to dual boot. I'm not interested in dual boot, I'm after a clean out the box Ubuntu install. How can I achieve this? (For my sanity, please use very simple instructions when responding. I don't claim to have any talent either for linux or as a sysadmin) Additional details copied from comments dated: 2012-05-29 ~15:19Z After booting from the CD, clicking Try Ubuntu, and then sudo fdisk /dev/sda I get fdisk: unable to seek on /dev/sda: Invalid argument sudo fdisk /dev/sdb gives Device contains neither a valid DOS partiion table, nor Sun, SGI or OSF disklabel. Building a new DOS disklabel with disk identifier 0x15228d1d. Changes will remain in memory only until you decide to write them. After that of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite). Command (m for help): I should add the Live CD desktop is graphically bad. I've got missing parts of programs and the terminal occasionally reflects to the bottom of the screen. But I can't imagine this is related.

Read the article
ubuntu 12.04 installer does not recognize drive partitions

- by endless forms

I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

Read the article
How can I insert an additional argument after the last argument in a prolog procedure?

- by Meko

I am new to learning prolog, and I want to know, if we have some procedure like father("Nic","Adam"). and I want to write a function that it will add new value to this father("Nic","Adam","something"..) how can I do this? Using list? Or what?

Read the article
Howto obtain Per-Interface statistics on windows

- by Canacourse

I am trying to find the most used Network card on windows 200 or XP. I planned to obtain the number of packets sent trough each NIC to determine the main NIC. I thought IP Helper might give me this information but also it looks like the functions in IP helper only give stats for all interfaces. I know this can be done. Any ideas? Many Thanks...

Read the article
Installing MonoTouch - ibtool not found error

- by Nic Wise

I've had Xcode (3.2.1 - SnowLeopard, iphone 3.1.3) installed for a while, and I can run and build apps on it fine. I installed MonoTouch, as I want to leverage the 8+ years of .NET skills I have :) So I installed: Mono: MonoFramework-2.6.1_1.macos10.novell.x86 MonoTouch: monotouch-eval-1.5.0 MonoDevelop: MonoDevelop-2.2.1-r152508 (was 2.2.1, but when I started it up, it said there was an update, which I installed - thats the update version) If I make a new project and build it, I get any of the following errors: Build failed. Object reference not set to the instance of an object. Build failed: ibtool not found (btw, it's in /Developer/usr/bin/ibtool) or a similar one to the second one if I use the older (2.2.1 released) version of MonoTouch. I can't find any debug info anywhere. I could reinstall XCode/iPhone SDK, but as it already is installed and works (and no, this isn't a SL upgrade), it doesn't make sense. Anyone got any ideas? I SO want to use MonoTouch - Obj-C drives me up the wall! Console apps (mono ones) work fine. Mac OS X 10.6.2, Macbook Pro, clean install with old settings moved over.

Read the article
Visual SourceSafe: Architecture/Management

- by Nic

I was looking for information on how other people with larger teams manage SourceSafe currently. I was looking for recommendations and advice for a new project I was setting up that will allow for a few key things Scalability Manage multiple overlapping releases Geared more around .NET however allows for legacy applications (VB, ASP and VBS) I am really looking for any lessons learned from other teams. I come from a StarTeam background and we used view labels and release labels to manage multiple overlapping projects. View labels geared more towards compiled code and SQL and the revision labels were used for VB/ASP projects. Thank you for any advice and sharing your experience and frustrations with other companies you might have worked with in the past.

Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74 | Next Page >