Search Results

Search found 1795 results on 72 pages for 'guy parker'.

Page 65/72 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • Ideal backup appliance for backup software like Bacula?

    - by Ricket
    I'm at a small company and we (the IT department of two) manage <100 client computers and a handful of servers. Currently we're using a company's appliance to handle backup; it does a small backup every night and a full backup every weekend, and a guy comes on Wednesday to take an offsite backup drive (and gives back last week's drive to swap with it). The backup is done only on the servers' hard drives, because our client computers and employees make sure not to store anything worthwhile on their own computers. So it's a pretty simple situation. Lately this system, mainly the appliance, has been having problems, so we are looking for an alternative. I'm researching other companies but also looking into what we might expect from trying to do this ourselves. There will undoubtedly be a large learning curve, but hey, that's what serverfault is for, right? :) So anyway I was looking at Bacula. Feature list sounds great, documentation is plentiful, but it's only software. So my question is, what is the ideal backup server to run the Bacula server software on? And not only the server but other related appliances. Our current backup appliance uses only hard drives, not tape drives. It has several plugged into it at one time, in hotswap bays on the front of the machine. I couldn't help but notice though, it's hardly more than Windows XP with hard drive bays, a PCI eSATA card (which connects to another appliance extension piece with 2 more bays), and their software. Since the company will take back their appliance if/when we cancel with them, where can I go to configure a server with these kinds of things? And should I consider switching to tape drives? What other concerns should I be thinking about when I pick out hardware for a backup server? Maybe I'm being naive, I'm sure Dell (and any other computer company) sells them in the small business section of their website, but I wanted to make sure that there's not some other more recommended place that other companies are getting their hardware from, and that I don't need anything special for Bacula.

    Read the article

  • Update php 5.2.0 to 5.2.4 with aptitude

    - by Kiva
    Hi guy, I would like to update my php 5 in my server. At this moment, I use php 5.2.0 so I want to update it to php 5.2.4 (not php 5.3). I tried to do this: aptitude update aptitude upgrade 63 packets were updated but not php which is always in 5.0 How can I update my php please ? Here is the output of commands asked by David in another post: aptitude search php5 p libapache-mod-php5 - server-side, HTML-embedded scripting langu i A libapache2-mod-php5 - server-side, HTML-embedded scripting langu i php5 - server-side, HTML-embedded scripting langu p php5-apache2-mod-bt - PHP bindings for mod_bt p php5-auth-pam - A PHP5 extension for PAM authentication i php5-cgi - server-side, HTML-embedded scripting langu p php5-clamavlib - PHP ClamAV Lib - ClamAV Interface for PHP5 p php5-cli - command-line interpreter for the php5 scri i A php5-common - Common files for packages built from the p i php5-curl - CURL module for php5 p php5-dev - Files for PHP5 module development i A php5-gd - GD module for php5 p php5-idn - PHP api for the IDNA library p php5-imagick - ImageMagick module for php5 p php5-imap - IMAP module for php5 p php5-interbase - interbase/firebird module for php5 p php5-json - JSON serialiser for PHP5 p php5-ldap - LDAP module for php5 p php5-mapscript - module for php5-cgi to use mapserver p php5-maxdb - PHP extension to access MaxDB databases fo i A php5-mcrypt - MCrypt module for php5 p php5-memcache - memcache extension module for PHP5 p php5-mhash - MHASH module for php5 p php5-ming - Ming module for php5 i A php5-mysql - MySQL module for php5 p php5-odbc - ODBC module for php5 p php5-pgsql - PostgreSQL module for php5 p php5-ps - ps module for PHP 5 p php5-pspell - pspell module for php5 p php5-radius - PECL radius module for PHP 5 p php5-recode - recode module for php5 p php5-snmp - SNMP module for php5 p php5-sqlite - SQLite module for php5 p php5-sqlite3 - SQLite3 module for php5 p php5-sqlrelay - SQL Relay PHP API p php5-suhosin - advanced protection module for php5 p php5-sybase - Sybase / MS SQL Server module for php5 p php5-tidy - tidy module for php5 p php5-uuid - OSSP uuid module for php5 p php5-xapian - Xapian search engine interface for PHP5 p php5-xcache - Fast, stable PHP opcode cacher p php5-xmlrpc - XML-RPC module for php5 p php5-xsl - XSL module for php5 aptitude show php5 | grep Version Version : 5.2.0-8+etch13 aptitude show php5-cgi | grep Version Version : 5.2.0-8+etch13 php5 --version -bash: php5: command not found php-cgi --version PHP 5.2.0-8+etch13 (cgi-fcgi) (built: Oct 2 2008 08:21:17) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies

    Read the article

  • PXE-E32 TFTP Open Timeout While Attempting to PXE Boot from Windows Deployment Services

    - by bschafer
    I'm running Windows Deployment Services on Windows Server 2008 R2 on top of an ESX 4.0 box. This is the only function of this VM instance, although it had previously functioned as an AD Domain Controller. My DHCP server is running on our primary Domain Controller, which is also Server 2008 R2, but running on metal. Everything was working perfectly until we recently had our backup generator fail during a power outage, causing all of our servers and networking equipment to lose power for a period of time. When we brought all of our equipment back up, everything was working as expected except for WDS. Our network is split up into several different vlans. Now, depending on which vlan the client computer is on, it's behaving differently when attempting to PXE boot into WDS. Our servers are located on the 10.55.x.x vlan, which, due to the nature of it, has no DHCP server active in it. The first computer we plugged in happened to be in the 10.99.x.x vlan, which is supposed to be reserved for network management devices (i.e. switches), but we've been using it occasionally otherwise. That computer gave us PXE-E11 ARP Timeout errors. When we moved to a different computer on the 10.19.x.x vlan (for general purpose use), it finally gets an IP from DHCP, but it presents us with a very stumping PXE-E32 TFTP Open Timeout error. Before the power outage, it didn't matter which vlan a device was on; it would PXE boot and image just fine. I've made no changes to anything server-side. Everything is configured exactly the same way it was on my WDS and DHCP servers as before the power outage. I've tried several different computers, including different models. All of this, combined with the quirky behavior depending on the vlan, makes me think something went wrong in one or more of our switches, probably because of the power outage. Unfortunately, I'm no network guy, and I know very little about how to configure our switches properly. Is this an issue with switches, etc? If so, how can I fix it? Is there some magical option I'm not aware of? Does anybody out there have any hunches? I've pretty much exhausted my ideas. Our main switch is an HP Procurve 5406. We also have 3x HP Procurve 4208 switches. The ESX Server is an HP ProLiant DL380 G6. The WDS VM is currently using the VMXNET3 network adaptor, but we've also tried the E1000 adaptor.

    Read the article

  • New Computer Build Questions

    - by MJ
    I'm in the process of gathering parts and specs for a new machine. I wear many hats, so the machine needs to do a lot. I need at least 2 monitor support, if not three. I also play many online MMOs (wow, aion, war hammer, etc), along with some freelance programming projects. I already have a case which is very large, so it will fit anything. I have 2 other SATA HDs. They are more for storage and basic programs. I feel that the best improvement could be done with a solid state HD, true or not? I'm more of a software/programming guy, so ANY input at all on improving this system build would be appreciated. I have a few questions with this list. AMD or Intel? I don't know enough about either to choose what would best fit me. Thanks! **EDIT: Thanks for the input everyone! Here are some answers: I do a lot of programming and gaming, so I do need things for both. The newer video card covers the gaming aspect, as well as allowing me to have many monitors. (hopefully upgrade to dual 30' or more) I don't need any additional HDs at this time. I have a SATA 160g and 120g from my previous computer, and a NAS system with over 2TB of storage on the homenetwork. I just wanted a fast HD for OS/programs/games. With the memory. I have used G.SKILL before in 2 system builds. It's done excellent for me in them. Very stable. **EDIT2: Made some additional changes. Lowered the power supply down to 750, which saves me more $$. Also changed the SSD to 2 WD 650G HDs. Thinking of doing a CPU upgrade to the 3.4GHZ AMD Phenom II X4 965 Black Edition Deneb 3.4GHz System Specs - Budget:$1500 CPU: AMD Phenom II X4 955 Black Edition Deneb 3.2GHz MB: GIGABYTE GA-MA790GPT-UD3H AM3 AMD 790GX HDMI ATX Memory: G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 1066 Video: DIAMOND 5870PE51G Radeon HD 5870 (Cypress XT) 1GB 256-bit GD Power Supply: XCLIO GREATPOWER 1000W ATX12V SLI Ready CrossFire Ready HD:Intel X25-M Mainstream SSDSA2MH080G2C1 2.5" 80GB SATA II MLC Changes: Power Supply: CORSAIR CMPSU-750TX 750W ATX12V / EPS12V HD: 2x Western Digital Caviar Blue WD6400AAKS 640GB CPU: AMD Phenom II X4 965 Black Edition Deneb 3.4GHz

    Read the article

  • DNS "recursion not available" using a Cisco AnyConnect VPN connection

    - by codeape
    Does anyone have experience with configuring Cisco AnyConnect VPN? We have a problem with client DNS name resolution when connected over VPN. To me, it looks as if the Cisco AnyConnect VPN client intercepts DNS queries from the clients. Can someone confirm that the AnyConnect VPN client in fact does this (intercepts DNS traffic)? Where is this configured on the VPN server? EDIT: Here's how the routing table changes when I connect to the VPN: [~] $ diff -u /tmp/route_normal /tmp/route_vpn --- /tmp/route_normal 2010-01-20 19:23:47.000000000 +0100 +++ /tmp/route_vpn 2010-01-20 19:24:46.000000000 +0100 @@ -1,6 +1,10 @@ Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface +xxx.xxx.xx.xx.i 10.0.0.1 255.255.255.255 UGH 0 0 0 ath0 172.16.53.0 * 255.255.255.0 U 0 0 0 vmnet1 10.0.0.0 * 255.255.255.0 U 0 0 0 ath0 +172.17.20.0 * 255.255.255.0 U 0 0 0 cscotun 0 +192.168.111.0 172.17.20.212 255.255.255.0 UG 0 0 0 cscotun 0 172.16.140.0 * 255.255.255.0 U 0 0 0 vmnet8 +172.16.0.0 172.17.20.212 255.255.0.0 UG 0 0 0 cscotun 0 default 10.0.0.1 0.0.0.0 UG 0 0 0 ath0 EDIT 2: The IT guy has done "something" on the VPN endpoint. Now I get "recursion not available" when doing nslookup. The DNS servers have recursion enabled. So it must be the Cisco VPN DNS interception messing this up. ubuntu@domU-12-31-39-00-ED-14:~$ /opt/cisco/vpn/bin/vpn connect xxx.xxxxxx.xx ... >> Please enter your username and password ... >> notice: Establishing VPN... >> state: Connected >> notice: VPN session established to ... ubuntu@domU-12-31-39-00-ED-14:~$ nslookup www.vg.no ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server Server: 172.16.0.23 Address: 172.16.0.23#53 ** server can't find www.vg.no.compute-1.internal: REFUSED ubuntu@domU-12-31-39-00-ED-14:~$ ping 195.88.55.16 PING 195.88.55.16 (195.88.55.16) 56(84) bytes of data. 64 bytes from 195.88.55.16: icmp_seq=1 ttl=240 time=110 ms 64 bytes from 195.88.55.16: icmp_seq=2 ttl=240 time=111 ms 64 bytes from 195.88.55.16: icmp_seq=3 ttl=240 time=109 ms ^C --- 195.88.55.16 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2017ms rtt min/avg/max/mdev = 109.953/110.379/111.075/0.496 ms

    Read the article

  • Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

    - by Kevinoid
    Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated. Update (2011-06-26) After failing to solve the problem, I resorted to paid Microsoft support. They were unable to solve the problem. Since then I have implemented a solution based on Linux that is working quite well. I will attempt to evaluate any proposed answers as best I can, but current configurations and time constraints will make this slow...

    Read the article

  • Need help making an ODBC MySQL Connection

    - by Andy Moore
    Short Version: How do I connect from PowerShell to an ODBC 5.1 MySQL Driver? I can't seem to find any connection strings that accurately have a "Provider" field for this particular instance. (See bottom of this question for examples/errors) ===== Long Version: I'm not a server guy, and I've been handed the task of setting up PowerGadgets on our network. I have a MySQL server running on a Linux box, that is configured for remote access and has a user defined for remote access as well. On my windows desktop PC, I have PowerGadgets installed. I installed the MySQL ODBC 5.1 connector, and went to Control Panel Data Sources and set up a User DSN connection to the database. The connection, user, and pass seem to be correct because it lists the tables of the database in my windows control panel. Where I'm running into trouble is in 3 places in PowerGadgets: When selecting a data source, I can select "SQL Server". Inputting the servers IP address does not work and I can't get this option to work at all. When selecting a data source, I can select "OleDB". This screen has a wizard on it, that appears to populate all the correct information (including database table names!) for me. "Test Connection" runs great. But if I try to complete the wizard, I get the error "The .NET Framework data provider for OLEDB does not support the MS Ole DB provider for ODBC Drivers." When selecting a data source, I can select "ODBC". This screen does not have a wizard and I cannot figure out a "connection string" that works. Typically it will respond with the error "The field 'Provider' is missing". Googling ODBC connection strings doesn't reveal any examples with a "provider" field and have no idea what to put in here. The connection string (for #2) above contains "SQLOLEDB" as a provider, and upon inputting that value into this connection string I get the same connection error that #2 gets. I believe I can solve my problems by figuring out a connection string for #3 but don't know where to get started. (PowerGadgets also allows for PowerShell support but I believe I will run into the same problem there) == Here's my current PowerShell connection that doesn't work: invoke-sql -connection "Driver={MySQL ODBC 5.1 Driver};Initial Catalog=hq_live;Data Source=HQDB" -sql "Select * FROM accounts" Spits back the error: "Invoke-Sql : An OLE DB Provider was not specified in the ConnectionString. An example would be, 'Provider=SQLOLEDB;'. == Another string that doesn't work: invoke-sql -connection "Provider=MSDASQL.1;Persist Security Info=False;Data Source=HQDB;Initial Catalog=hq_live" -sql "select * from accounts" And the error: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

    Read the article

  • iPhone 3.1 Black Screen

    - by churnd
    Since I've updated my 3G iPhone to 3.1, it will become unresponsive after ~4-5 hours. It looks like it's off, but it's not. None of the buttons do anything that I can see. The only way I can get a screen back is to do a hard reset (Power + Home). Has anyone else had this problem? What can I do to fix it? I've had it 3 happen 3 times already. Very annoying. Apparently, the Discussions forum on Apple.com also shows lots of people are having the same problem. One guy said he did a restore and that fixed it for him, which I haven't tried yet because many others also tried that and it didn't help. A few others have said turning off WIFI fixes it for them, so I'm going to try that today. Another thing I've noticed is that now, when I plug in my iPhone to my Macbook Pro, iTunes 9 does not launch. It used to before the update. ** Further update and possible solution ** I left my iPhone plugged into my Macbook Pro yesterday while at work, and didn't use it much throughout the day. I noticed it didn't lock up once. I suspect this was because it was connected to a power source. I continued to use my iPhone with no problem yesterday and today. Still no lockups as of now. I personally think this was Spotlight and/or Genius "doing it's thing" from a new install. Kinda like an OS upgrade on your Mac... Spotlight has to rebuild itself and those first couple of hours can be kinda sluggish. This would be even more so on the iPhone where processing power is limited, and I'm sure the processor is clocked down a bit while on battery power, which would further amplify the problem. Again, just my guess. My iPhone is working fine now. ** Final Solution ** Update to 3.1.2. Problem solved.

    Read the article

  • Windows 2008 R2 CA and auto-enrollment: how to get rid of >100,000 issued certificates?

    - by HopelessN00b
    The basic problem I'm having is that I have 100,000 useless machine certificates cluttering up my CA, and I'd like to delete them, without deleting all certs, or time jumping the server ahead, and invalidating some of the useful certs on there. This came about as a result of accepting a couple defaults with our Enterprise Root CA (2008 R2) and using a GPO to auto-enroll client machines for certificates to allow 802.1x authentication to our corporate wireless network. Turns out that the default Computer (Machine) Certificate Template will happily allow machines to re-enroll instead of directing them to use the certificate they already have. This is creating a number of problems for the guy (me) who was hoping to use the Certificate Authority as more than a log of every time a workstation's been rebooted. (The scroll bar on the side is lying, if you drag it to the bottom, the screen pauses and loads the next few dozen certs.) Does anyone know how to DELETE 100,000 or so time-valid, existing certificates from a Windows Server 2008R2 CA? When I go to delete a certificate now, now, I get an error that it cannot be delete because it's still valid. So, ideally, some way to temporarily bypass that error, as Mark Henderson's provided a way to delete the certificates with a script once that hurdle is cleared. (Revoking them is not an option, as that just moves them to Revoked Certificates, which we need to be able to view, and they can't be deleted from the revoked "folder" either.) Update: I tried the site @MarkHenderson linked, which is promising, and offers much better certificate manageability, buts still doesn't quite get there. The rub in my case seems to be that the certificates are still "time-valid," (not yet expired) so the CA doesn't want to let them be deleted from existence, and this applies to revoked certs as well, so revoking them all and then deleting them won't work either. I've also found this technet blog with my Google-Fu, but unfortunately, they seemed to only have to delete a very large number of certificate requests, not actual certificates. Finally, for now, time jumping the CA forward so the certificates I want to get rid of expire, and therefore can be deleted with the tools at the site Mark linked is not a great option, as would expire a number of valid certificates we use that have to be manually issued. So it's a better option than rebuilding the CA, but not a great one.

    Read the article

  • How to grow to be global sysadmin of an organization?

    - by user64729
    Bit of a non-technical question but I have seen questions of the career development type on here before so hopefully it is fine. I work for a fast growing but still small organization (~65 employees). I have been their external sysadmin for a while now, looking after hosted Linux servers and infrastructure. In the past 12 months I have been transforming into the internal sysadmin for our office too. I'm currently studying Cisco CCNA to cover the demands of being an internal sysadmin and looking after the office LAN, routers, switches and VPNs. Now they want me to look after the global sysadmin function of the organization as a whole. The organization has 3 offices in total, 2 in the UK and 1 in the US. I work in one of the UK offices. The other offices are primarily Windows desktops with AD domain shops. My office is primarily a Linux shop with a file-server and NFS/NIS (no AD domain for the Windows desktops yet but it's in the works). Each other office has a sysadmin which in theory I am supposed to supervise but in reality each is independent. I have a very competent junior sysadmin working with me who shares the day-to-day tasks and does some of the longer term projects with my supervision. My boss has asked me how to grow from being the external sysadmin to the global sysadmin. I am to ponder this and then report back to him on how to achieve this. My current thoughts are: Management training or professional development - eg. reading books such as "Influencer" and "7 Habits". Also I feel I should take steps to improving communication skills since a senior person is expected to talk and speak out more often. Learn more about Windows and Active Directory - I'm an LPI-certified guy and have a lot of experience in Linux (Ubuntu or desktop, Debian/Ubuntu as server). Since the other offices are mainly Windows-domains it makes sense to skill-up in that area so I can understand what the other admins are talking about. Talk to previous colleagues who have are are in this role already - to try and get the benefit of their experience. Produce an "IT Roadmap" or similar that maps out where we want the organization to be and when, plotted out over the next couple of years with regards to internal and external infrastructure. I have produced a "Security roadmap" already which does cover some of these things. I guess this can summed up as "thinking more strategically"? I'd appreciate comments from anyone who has been through a similar situation, thanks.

    Read the article

  • Gateway GT5220 Boot/POST Failure

    - by John Rudy
    I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

    Read the article

  • Ubuntu Newbie Needs Assistance!!

    - by Steve Greene
    New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

    Read the article

  • Can someone explain RAID-0 in plain English?

    - by Edward Tanguay
    I've heard about and read about RAID throughout the years and understand it theoretically as a way to help e.g. server PCs reduce the chance of data loss, but now I am buying a new PC which I want to be as fast as possible and have learned that having two drives can considerably increase the perceived performance of your machine. In the question Recommendations for hard drive performance boost, the author says he is going to RAID-0 two 7200 RPM drives together. What does this mean in practical terms for me with Windows 7 installed, e.g. can I buy two drives, go into the device manager and "raid-0 them together"? I am not a network administrator or a hardware guy, I'm just a developer who is going to have a computer store build me a super fast machine next week. I can read the wikipedia page on RAID but it is just way too many trees and not enough forest to help me build a faster PC: RAID-0: "Striped set without parity" or "Striping". Provides improved performance and additional storage but no redundancy or fault tolerance. Because there is no redundancy, this level is not actually a Redundant Array of Inexpensive Disks, i.e. not true RAID. However, because of the similarities to RAID (especially the need for a controller to distribute data across multiple disks), simple strip sets are normally referred to as RAID 0. Any disk failure destroys the array, which has greater consequences with more disks in the array (at a minimum, catastrophic data loss is twice as severe compared to single drives without RAID). A single disk failure destroys the entire array because when data is written to a RAID 0 drive, the data is broken into fragments. The number of fragments is dictated by the number of disks in the array. The fragments are written to their respective disks simultaneously on the same sector. This allows smaller sections of the entire chunk of data to be read off the drive in parallel, increasing bandwidth. RAID 0 does not implement error checking so any error is unrecoverable. More disks in the array means higher bandwidth, but greater risk of data loss. So in plain English, how can "RAID-0" help me build a faster Windows-7 PC that I am going to order next week?

    Read the article

  • Permission denied install Joomla CiviCRM

    - by Tim
    Dear All, I am trying to install CiviCRM on a Joomla 1.5.17 web server running Ubuntu 9.10. Uploading the package to the tmp directory in /var/www/[site name]/tmp and installing creates this error: Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: include_once(/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php) [function.include-once]: failed to open stream: Permission denied in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: include_once() [function.include]: Failed opening '/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php' for inclusion (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: require_once(DB.php) [function.require-once]: failed to open stream: No such file or directory in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Fatal error: require_once() [function.require]: Failed opening required 'DB.php' (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Initially I got a permissions denied error and thought that Joomla did not have permissions to all its directories but looking at Help-System information all the necessary directories are writable. I then decided to chmod 777 all the directories and try again but it still fails. Looking at the directories afterwards it seems that the new directories being created are not being created 777. By changing them I can get at least one step further before the error appears again. My question is does anyone know how to get round this? I am thinking that the new directories being created will require sudo privileges to have mv and create actions carried out, hence the permission denied errors. Can this be configured in Joomla? Or is there a way to specify that new directories created in /var/www/[site name] take 777 by default? any help greatly appreciated! EDIT: P.S. if anyone could give me a clue as to how the insert code feature works as well that would be great! Might make this post a bit more readable! EDIT2: Well I have had a bash at changing the permissions and ownership. sudo chown -R www-data:www-data /var/www/trbcp I then tried changing the whole /var directory (insecure I know but this is a test and dev server for me to find my feet on) to 777 and still getting permission errors. It seems to be error opening stream? Not a php guy so not sure what that is but could it be that permissions to run php script need to change? any thoughts greatly appreciated.

    Read the article

  • Brand new Mac Pro tower fan suddenly runs full-tilt

    - by Caffeine Coma
    My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

    Read the article

  • SMTP host name vs. domain in "From:" address vis-a-vis Email Deliverability

    - by Jared Duncan
    I'm trying to implement (or make sure that I'm correctly following) email sending best practices to improve deliverability, but the role of the smtp server's host name vs the domain name of the From: email address seems to be unclear, even after reading dozens of people's articles/input. Specifically, I understand that to satisfy the reverse DNS check, there must be a PTR record for the IP address of the sending machine that yields a domain name that matches the host name of the sending machine / SMTP server. Some say it needs to match the one given by the "hostname" command, most say it's the one provided with the HELO / EHLO statement, and this guy even says they MUST be the same (according to / enforced by what, I don't know; that's only a minor point of confusion, anyhow). First, what I can't find anywhere is whether or not the domain name of the From: email address needs to match the domain name of the SMTP server. So in my case, I have a VPS with linode. It primarily hosts a particular domain of mine, example.com, but I also sometimes do work on other projects: foo.com and bar.com. So what I'm wondering is if I can just leave the default linode PTR record (which resolves to abc.def.linode.com), make sure that abc.def.linode.com is what my mail server (qmail) is configured to say at HELO, and then proceed to use it to send out emails for example.com, foo.com, et al. If so, then I am confused by the advice given here, specifically (in a listing of bad case scenarios): No SPF record for the domain being used in the HELO command Why would THAT domain need an SPF record? And if it does, which domain should it provide whitelisting for: the HELO domain, or the domain of the From: email address (envelope sender)? Also, which domain would need to accept mail sent to [email protected]? If the domains must be the same, that would seem rather limiting to me, because then for every domain you wanted to send email from, you'd have to get another IP address for it. It would also compromise or ruin one's ability to do non-email sending things (e.g. wget) relatively anonymously. However, the upside--if this is the case--is that it would make for a far less confusing setup. I'm currently using the linode.com SMTP+PTR domain and example.com From: address combination without much of any deliverability issue, but my volume is very low and I'd like to know if someone out there has experience with larger volumes and has specifically tested the difference and/or has inside knowledge and/or has an authoritative answer (and source) for this particular question. I'm happy to clarify anything, let me know. Thanks in advance.

    Read the article

  • Buying a new printer instead of replacing ink?

    - by Kelsey
    With prices of basic printers being around $40 - $50 and a ink cartridge being around $20 - $30 each for black AND color. It costs me more to replace the printer's ink than to just buy a brand new printer. This just seems like a total waste of materials though (I have 4 printers sitting in my basement with no ink). I know the ink cartridges are smaller (not as full) in a new printer but I go through it in about 1 to 1.5 years only and by then my $40 gets me a better printer to boot. Also with certain printers the heads are not part of the ink (Epson use to do this and still might) so I get new heads as well. Is this a bad practice? Are retailers making this a reality when they are selling working hardware cheaper than replacement parts? Is there something more I should be considering? Edit: Some background, long ago I bought an Epson printer which I used to print docs etc vary rarely. The ink started running low so I bought to new carts for around $60 if I recall. The printer then stopped working so I replaced the carts with the new ones but the head was dead on the black which was not worth repairing. I bought a new HP printer for $49. This lasted around 1.5yrs and then the ink ran out, I went to buy new carts and the guy at the store got me to buy a new printer (that was smaller, faster, higher dpi, etc) and it was cheaper than replacing the ink. When the ink ran out on that one I bought a new printer again, etc. The printer gets used maybe once a week at most and I never print photos or anything. It normally is jsut stored away unplugged accumulating dust. People say to buy a laser printer but they are much larger, do not print color, (in the price range I am looking at) and might have the exact same issues. The problem I see is the manufacturer is making my behaviour possible by selling new printers at a loss hoping that they will cash in on the ink later. How can they produce a printer for so cheap which HAS ink in it, and the refills cost more than the unit? It can't.

    Read the article

  • apcupsd on Linux does not report on APC BackUPS Pro 900

    - by lserni
    From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

    Read the article

  • No login prompt displayed after updating Ubuntu 10.04, broken gdm

    - by cliff
    So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

    Read the article

  • What part of SMF is likely broken by a hard power down?

    - by David Mackintosh
    At one of my customer sites, the local guy shut down their local Solaris 10 x86 server, pulled the power inputs, moved it, and now it won’t start properly. It boots and then presents a prompt which lets you log in. This appears to be single user milestone (or equivalent). Digging into it, I think that SMF isn’t permitting the system to go multi-user. SMF was generating a ton of errors on autofs, after some fooling with it I got it to generate errors on inetd and nfs/client instead. This all tells me that the problem is in some SMF state file or database that needs to be fixed/deleted/recreated or something, but I don’t know what the actual issue is. By “generate errors”, I mean that every second I get a message on the console saying “Method or service exit timed out. Killing contract <#.” This makes interacting with the computer difficult. Running svcs –xv shows the service as “enabled”, in state “disabled”, reason “Start method is running”. Fooling with svcadm on the service does nothing, except confirm that the service is not in a Maintenance state. Logs in /lib/svc/log/$SERVICE just tell you that this loop has been happening once per second. Logs in /etc/svc/volatile/$SERVICE confirm that at boot the service is attempted to start, and immediately stopped, no further entries. Note that system-log isn’t starting because system-log depends on autofs so I have no syslog or dmesg. Googling all these terms ends up telling me how to debug/fix either autofs or nfs/client or inetd or rpc/gss (which was the dependency that SMF was using as an excuse to prevent nfs/client from “starting”, it was claiming that rpc/gss was “undefined” which is incorrect since this all used to work. I re-enabled it with inetadm, but inetd still won’t start properly). But I think that the problem is SMF in general, not the individual services. Doing a restore_repository to the “manifest_import” does nothing to improve, or even detectibly change, the situation. I didn’t use a boot backup because the last boot(s) were not useful. I have told the customer that since the valuable data directories are on a separate file system (which fsck’s as clean so it is intact) we could just re-install solaris 10 on the / partition. But that seems like an awfully windows-like solution to inflict on this problem. So. Any ideas what piece is broken and how I might fix it?

    Read the article

  • Preventing 'Reply-All' to Exchange Distribution Groups

    - by Larold
    This is another question in a short series regarding a challenging Exchange project my co-workers have been asked to implement. (I'm helping even though I'm primarily a Unix guy because I volunteered to learn powershell and implement as much of the project in code as I could.) Background: We have been asked to create many distribution groups, say about 500+. These groups will contain two types of members. (Apologies if I get these terms wrong.) One type will be internal AD users, and the other type will be external users that I create Mail Contact entries for. We have been asked to make it so that a "Reply All" is not possible to any messages sent to these groups. I don't believe that is 100% possible to enforce for the following reasons. My question is - is my following reasoning sound? If not, please feel free to educate me on if / how things can properly be implemeneted. Thanks! My reasoning on why it's impossible to prevent 100% of potential reply-all actions: An interal AD user could put the DL in their To: field. They then click the '+' to expand the group. The group contains two external mail contacts. The message is sent to everyone, including those external contacts. External user #1 decides to reply-all, and his mail goes to, at least, external user #2, which wouldn't even involve our Exchange mail relays. An internal AD user could place the DL in their Outlook To: field, then click the '+' button to expand the DL. They then fire off an email to everyone that was in the group. (But the individual addresses are listed in the 'To:' field.) Because we now have a message sent to multiple recipients in the To: field, the addresses have been "exposed", and anyone is free to reply-all, and the messages just get sent to everyone in the To: field. Even if we try to set a Reply-To: field for all of these DLs, external mail clients are not obligated to abide by it, or force users to abide by it. Are my two points above valid? (I admit, they are somewhat similar.) Am I correct to tell our leadership "It is not possible to prevent 100% of the cases where someone will want to Reply-All to these groups UNLESS we train the users sending emails to these groups that the Bcc: field is to be used at all times." I am dying for any insight or parts of the equation I'm not seeing clearly. Thank you!!!

    Read the article

  • Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

    - by Tiby
    I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

    Read the article

  • What's the best scenario for using a wireless router with Comcast Business Class

    - by Buck
    Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

    Read the article

  • Can't validate mine, sudo nor root in Debian "Jessie" Gnome anymore?

    - by Janar
    I'm Debian beginner & GUI guy in a bit of trouble? Can't login as sudo/gksu/root/su nor as (main/super)user after removed user password via Gnome-user-settings. History of actions (Probably irrelevant though) Installed Debian "Jessie" GNU/Linux with xFce GUI (en-US) as only OS. HardWare is ThinkPad w510. Skipped root user password in setup, to get sudo for superuser easily. Logged in (as always had) with Gnome (3.4.x), not once with xFCE. (installed Xfce. Installed xFce only to achieve more control (easier management) over packages this way, to set-up gnome much more by mine likes. Added more jessie repros (same ones as in Wheesy stable by default but for Jessie as, Jessie only had repros for security updates by default). Installed lots of gtk(3) & gnome(3) based soft; (- restarted again after this) Installed propietary graphics card driver for mine nvidia quadro. (- restarted once again after that one) Installed more stuff related to mine work/school/devel. The actual problem Had a plan to restart again, but wanted to set up auto-login first, instead set user password to none (don't ask why / perhaps caused by being awake for a looooong time), noticed it, and set also to auto-login, but couldn't undo mine previous mistake to create new password for me. As mine password is set to none I would have expected that simply return in pass prompt for emty password field would do, but it won't authenticate. I tried Alt+F2 "gksu gedit" as well as: sudo wget "https://www.some-page.eu/file.ext" and "su" in terminals, none has applied (quite logical actually - as I'm sudoer and highest ranked super user, besides only user in computer). Current stand Everything worked & still works nice after this accident, besides this password prompts part. To spoked to log-out nor restart. Synaptic package-manager is still open with root rights (only one, that has left open prior to the issue and not closed since, just in case). Goggled for help and read some manuals/faqs/how-tos - mostly lead to sudoers file management, but not found one specifically for mine issue - so still not any smarter. Really hope, that I don't have to redo OS inst all over again, by just one stupid mistake. Thanks for your reply :-)

    Read the article

  • Set up Gmail with Google apps for own domain

    - by erdomester
    I rent a server from a German company. I have remote access to it as well as WHM and CPanel. I decided to use Google's mail servers for obvious reasons. I am not an admin just an average guy trying to set up what needs to be set up. The problem is I am unable to make the necessary settings. I watched Youtube tutorials, followed written ones as well as Google's help, but there is (at least) one serious problem with my domain settings. The domain console alwasy says Your MX records are incorrect When I check dappwall.com in mxtoolbox.com it says Pref Hostname IP Address TTL 10 mail.dappwall.com 46.4.88.247 24 hrs But this is not the host name. I checked WHM and my hostname is server1.dappwall.com. I can confirm it by typing the hostname command in putty. However, if I do an mx lookup at mxtoolbox.com on server1.dappwall.com or mail.dappwall.com I get Lookup failed after 1 name servers timed out or responded non-authoritatively I ran checks on the google apps toolbox on dappwall.com and two problems emerged: 1.No Google mail exchangers found. Relayhost configuration? 10 mail.dappwall.com In Google Apps > Settings for Gmail > Advanced settings it also says that my current MX records for dappwall.com is Priority Points to 10 MAIL.DAPPWALL.COM. So mail.dappwall.com again. I also have access to a robot provided by the company I rent the server from. Here I see this mail at two places but how should I (if it's necessary) modify this? I set Email routing to Automatically Detect Configuration. 2.There SHOULD be a valid SPF record. "v=spf1 include:_spf.google.com ~all" In the DNS Zone Editor I added this spf record: Name TTL Class Type Record dappwall.com. 1440 IN TXT v=spf1 include:_spf.google.com ~all In the cPanel Email Authentication page it says SPF: Status: Enabled Warning: cPanel is unable to verify that this server is an authoritative nameserver for dappwall.com. [?] Your current raw SPF record is : v=spf1 include:_spf.google.com ~all How can I confirm that my server is an authoritative nameserver for dappwall.com? In WHM Service Configuration Mailserver selection Dovecot was set but I disabled it (i don't know if that's ok). What am I missing here? Where is that mail.dappwall.com coming from?

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >