Search Results

Search found 12918 results on 517 pages for 'hard turner'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 65/517 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • why does the partition start on sector 2048 instead of 63

    - by gcb
    I had two drives partitioned the same and running 2 raid partitions on each. One died and I replaced it under warranty for the same model. While trying to partition it, the first partition can only start on sector 2048, instead of 63 that was before. Driver have different geometry as previous and remaining ones. (Fewer heads/more cylinders) old drive: $ sudo fdisk -c -u -l /dev/sdb Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000aa189 Device Boot Start End Blocks Id System /dev/sdb1 * 63 174080339 87040138+ 83 Linux /dev/sdb2 174080340 182482334 4200997+ 82 Linux swap / Solaris /dev/sdb3 182482335 3907024064 1862270865 fd Linux raid autodetect remanufactured drive received from warranty: $ sudo fdisk -c -u -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 81 heads, 63 sectors/track, 765633 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d0b5d Device Boot Start End Blocks Id System /dev/sda1 2048 ... why is that?

    Read the article

  • Is SATA bandwith per Port or per Controller?

    - by instanceofTom
    I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

    Read the article

  • How do I restore a partition without losing the data?

    - by sama
    I lost the D-partition in My Computer I opened My Computer, but couldn't find it and I don't know where it is or how to return it. I went to Disk Management and found it available as free space. So I tried to make it NTFS, but I had to format the drive and I don't want to, since it will erase my data. Does anyone know how I can restore my partition without losing my data?

    Read the article

  • Dell Inspiron 1525 - internal hard drive not detected

    - by GingerT
    Others have asked about this issue but had intermittent access to their HD, therefore their results did not apply to this situation. I have tried reseating the HD to no effect. I also tried booting from the Internal HD to no effect. Next step get a connector cable and move the data to a different HD, or send in for HD recovery? Any suggestions?

    Read the article

  • Start a ZFS RAIDZ zpool with two discs then add a third?

    - by Doug S.
    Let's say I have two 2TB HDDs and I want to start my first ZFS zpool. Is it possible to create a RAIDZ with just those two discs, giving me 2TB of usable storage (if I understand it right) and then later add another 2TB HDD bringing the total to 4TB of usable storage. Am I correct or does there need to be three HDDs to start with? The reason I ask is I already have one 2TB drive I'm using that's full of files. I want to transition to a zpool but I'd rather only buy two more 2TB drives if I can. From what I understand, RAIDZ behaves similarly to RAID5 (with some major differences, I know, but in terms of capacity). However, RAID5 requires 3+ drives. I was wondering if RAIDZ has the same requirement. If I have to, I can buy the three drives and just start there, later adding the fourth, but if I could start with two and move to three that would save me $80.

    Read the article

  • Where do vendors publish internal transfer rates of HDDs?

    - by red888
    So I've started to dig into storage fundamentals and found that in order to calculate the IOPS of a HDD you need to know the internal transfer rate of the drive (time it takes data to move from the platters to internal disk's cache). I went on newegg and even a few vendor sites and could not find this info published for any HDDs. Is it sometimes called something else? Take this link to a seagate HDD for instance. Nowhere do I see "internal transfer rate", but I do see something called "Sustained Data Rate OD"- is that the same thing? Just so you know where I'm getting this info (Book: "Information Storage and Management Storing, Managing..."): Consider an example with the following specifications provided for a disk: The average seek time is 5 ms in a random I/O environment; therefore, T = 5 ms. Disk rotation speed of 15,000 revolutions per minute or 250 revolutions per second — from which rotational latency (L) can be determined, which is one-half of the time taken for a full rotation or L = (0.5/250 rps expressed in ms). 40 MB/s internal data transfer rate, from which the internal transfer time (X) is derived based on the block size of the I/O — for example, an I/O with a block size of 32 KB; therefore X = 32 KB/40 MB. Consequently, the time taken by the I/O controller to serve an I/O of block size 32 KB is (TS) = 5 ms + (0.5/250) + 32 KB/40 MB = 7.8 ms. Therefore, the maximum number of I/Os serviced per second or IOPS is (1/TS) = 1/(7.8 × 10^-3) = 128 IOPS.

    Read the article

  • Can not copy files after installing windows

    - by Ali
    I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

    Read the article

  • Motherboard Dying? AHCI Drive Init and boot loop intermittent failure

    - by Adam Heath
    My computer is now intermittently failing to boot up. For the last couple of days, when I turn it on it hangs on "AHCI Drive Init...", and when powered off and on again, it booted up fine. Today, it did the same but failed in a few other ways too, seemingly at random: Hangs on "AHCI Drive Init..." Boot loop (after "AHCI Drive Init..." appears for a split second (no drives listed)) Black screen (after "AHCI Drive Init..." appears for a split second, a black screen with all fans still running) The interesting part is that the above is not affected by what drives are connected, or what to. I have tried both disks, each disk individually and no disks (along with trying the primary and secondary SATA controllers), none of this has any effect on what happens. After about 20+ attempts of different combinations, it suddenly decided it would boot up into Windows, and I hadn't touched anything for about 2 cycles. Motherboard: Gigabyte GA-870A-USB3 Processor: Amd Phoenom II x6 1090T RAM: 8GB Corsair 1600 Primary Disk: Plextor 128GB SSD Secondary Disk: Western Digital Black 1TB OS: Windows 8.1 Is this my motherboard dying? Or could something else be the cause? Thanks!

    Read the article

  • "Can't find root filesystem / error mounting /dev/root" when booting to new kernel

    - by salparadise
    I am trying to upgrade my kernel from 2.6.18-274 to 2.6.39 for some wireless card drivers. When I boot into the new kernel I get the "Can't find root filesystem / error mounting /dev/root" googling led me to this page http://fedoraproject.org/wiki/Common_kernel_problems#Can.27t_find_root_filesystem_.2F_error_mounting_.2Fdev.2Froot From what I am reading seems to be an issue with a driver for my SATA controller or HD, but I can't find what option I need to add to the kernel. Doing a diff from the old initrd to the new one gives me the following: root-> diff /tmp/kafter /tmp/kbefore 6a7,8 > lib/dm-message.ko > lib/dm-region_hash.ko 8a11 > lib/dm-raid45.ko 13d15 < lib/dm-region-hash.ko 16a19 > lib/dm-mem-cache.ko Do I need any of those? not sure if I would need dm-raid45.ko as I am not running a raid. I have the same SATA and IDE options configured for both kernels so not sure what else to look for, any help is appreciated. Additionally here is the HW info: 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Unknown device 3006 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233 I/O ports at 1818 [size=8] I/O ports at 1830 [size=4] I/O ports at 1820 [size=8] I/O ports at 1834 [size=4] I/O ports at 14f0 [size=16] Capabilities: [70] Power Management version 2 root-> smartctl -a /dev/sda ... === START OF INFORMATION SECTION === Device Model: WDC WD5000AADS-00S9B0

    Read the article

  • IDE Motherboard to Boot from a SATA 1T Hdd

    - by JavaMan
    I want to use my SATA HDD in my very old ASUS A7V8X-X motherboard (made in 2003). I intended to buy a cheap adapter for this. Say something similar to this one: http://www.cooldrives.com/satoidecofor.html But would there be any issue if I want to boot from this SATA drive? My impression is that these kind of adapters convert SATA signal and commands to PATA directly and such a low level conversion should be transparent to the motherboard and BIOS - in case the BIOS doesn't support SATA. And, for my motherboard, it sure doesn't. Does anyone ever used such a kind of adapter to support a boot drive? Any success sorry?

    Read the article

  • Using Ubuntu switch a failing windows 7 harddrive?

    - by firefusion
    My laptop harddrive has developed some serious read errors in the windows partition. Windows 7 still boots but every single action takes an aeon, and it is definitely due to a harddisk error not due to any spyware. I'm using the Ubuntu partition now. I've ordered a new harddrive but my laptop didn't come with a Windows 7 install disk (I think I was meant to make one with the windows 7 tools). So how can I install Windows 7 on my new harddrive?

    Read the article

  • How to use File History with Recovery partition?

    - by Karl
    I formatted the recovery partition right after installing Windows 8. I'm curious as to why File history only allow the use of external HDD. Instead of using the Recovery Partition. I can't find a way to use it. I decided to use it exclusively for Restore Points. Is there any way to make the Recovery Partition exclusively for the use of File History? Or should I use 3rd Party programs instead, (Easeus Todo Backup, Macrium Reflect, etc)?

    Read the article

  • Is it a very bad idea to create disk image of mounted disk?

    - by Maciek Sawicki
    I would like to backup my server. For example using dd: dd if=/dev/md0 of=/some_network_share I wonder if this image will be vary inconsistent if /dev/md0 is mounted? Would it be possible to convert such dd image to vdi drive and create working virtual machine? Using this command for example: VBoxManage convertfromraw ImageFile.dd OutputFile.vdi Network traffic is disabled on firewall (there is only connection to/from one remote machine where image is copied).

    Read the article

  • Completely replacing (upgrading) a RAID 5 array of disks on an ESXi server

    - by jshin47
    I have a development server that runs several VM on ESXi 5. It has an array of disks in the RAID 5 configuration where all of the disks are currently the same size. I would like to expand storage on this box greatly, but I am not sure what the smartest way to go about this would be. My current plan is to: Turn off all VM Copy VM folders from server to another location Verify that I can mount all the VM on the new location (ie that the copy went ok) Replace all the disks with new, bigger ones Reinstall ESXi5 Copy the VM back over This seems like it might take a while to accomplish and is not terribly slick, especially since I will have to reconfigure ESXi 5, but is there a smarter alternative?

    Read the article

  • Is there a clean way to obtain exclusive access to a physical partition under Windows?

    - by zneak
    Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive for writing. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it first. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. I'm not sure I want to do that. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away? What I'd be looking for, I suppose, is a way to put just partitions offline instead of whole physical drives.

    Read the article

  • Boot drive not found issue after cloning using Apricorn EZgig

    - by TomWilsonFL
    A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

    Read the article

  • How should I interpret the specifications of a SSD?

    - by paulgreg
    When considering to buy a SSD, how should I interpret the different specifications of the SSD? Here are some specific things that need to be deciphered: Controller (this can affect performance and endurance more than all other factors combined) Bus Technology Form Factor (Physical Size) Capacity NAND or NOR technology Power Consumption during Read, during Write, when Idle Read/Write Burst and Sustained Throughput All of these things I would like to be explained in more detail and their actual importance in selecting an SSD.

    Read the article

  • Disable RAID Controller

    - by B.Mr.W.
    I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

    Read the article

  • I found a some bad sectors with chkdsk. Should I be worried?

    - by mottalrd
    Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

    Read the article

  • How long do uploaded files stay in the tmp folder in Linux Ubuntu?

    - by Jean-Nicolas Boulay Desjardins
    I am building a web application where my users will be able to upload files. After the files are uploaded I need to send the files to two other servers, and after they will be deleted from the server where they were just uploaded to. I am wandering is it a good I idea to keep the uploaded files in the tmp/ folder the time the uploaded files are sent to the other two servers or should I move them to another folder incase they get deleted? I am also wandering because I would like to know if I have to build a cron script to get rid of the files that have been transfered to the other servers so that I get my disk space back.

    Read the article

  • how can i move ext3 partition to the beginning of drive without losing data?

    - by Felipe Alvarez
    I have a 500GB external drive. It had two partitions, each around 250GB. I removed the first partition. I'd like to move the 2nd to the left, so it consumes 100% of the drive. How can this be accomplished without any GUI tools (CLI only)? fdisk Disk /dev/sdd: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc80b1f3d Device Boot Start End Blocks Id System /dev/sdd2 29374 60801 252445410 83 Linux parted Model: ST350032 0AS (scsi) Disk /dev/sdd: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 2 242GB 500GB 259GB primary ext3 type=83 dumpe2fs Filesystem volume name: extstar Last mounted on: <not available> Filesystem UUID: f0b1d2bc-08b8-4f6e-b1c6-c529024a777d Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal dir_index filetype needs_recovery sparse_super large_file Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 15808608 Block count: 63111168 Reserved block count: 0 Free blocks: 2449985 Free inodes: 15799302 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8208 Inode blocks per group: 513 Filesystem created: Mon Feb 15 08:07:01 2010 Last mount time: Fri May 21 19:31:30 2010 Last write time: Fri May 21 19:31:30 2010 Mount count: 5 Maximum mount count: 29 Last checked: Mon May 17 14:52:47 2010 Check interval: 15552000 (6 months) Next check after: Sat Nov 13 14:52:47 2010 Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: d0363517-c095-4f53-baa7-7428c02fbfc6 Journal backup: inode blocks Journal size: 128M

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >