Search Results

Search found 1674 results on 67 pages for 'jack sw'.

Page 65/67 | < Previous Page | 61 62 63 64 65 66 67  | Next Page >

  • Ubuntu server 10.04 doesn't boot into installed Gnome desktop automatically

    - by Tong Wang
    I've installed Ubuntu server 10.04 and then installed Gnome desktop on top of it, because I am new to Linux and its command line, I need the GUI desktop to help me get around. However, the problem I got is that the server doesn't boot into the GUI desktop when powered on. It's booting into a shell like this: Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enought?) - check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/mapper/cecdata-root does not exist. Dropping to a shell! BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) result of (cat /proc/cmdline) BOOT_IMAGE=/vmlinuz-2.6.32-28-server root=/dev/mapper/cecdata-root ro quiet Then I have type "exit" to exit the shell and then it boots into Gnome. Any idea what's wrong? Edit: add output for the following commands wt@cecdata:~$ ls /dev/mapper/ cecdata-root cecdata-swap_1 control wt@cecdata:~$ fdisk -l wt@cecdata:~$ wt@cecdata:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/cecdata-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=1635be41-d025-405e-b4a3-6f0abedb7aab /boot ext2 defaults 0 2 /dev/mapper/cecdata-swap_1 none swap sw 0 0 wt@cecdata:~$ Adding output for lsmod wt@cecdata:~$ lsmod Module Size Used by fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit dell_wmi 2177 0 dcdbas 6918 0 vga16fb 12757 1 vgastate 9857 1 vga16fb psmouse 64576 0 serio_raw 4950 0 power_meter 9473 0 bnx2 72874 0 lp 9336 0 parport 37160 1 lp mptsas 50592 2 usbhid 41116 0 mptscsih 37167 1 mptsas hid 83568 1 usbhid mptbase 91674 2 mptsas,mptscsih scsi_transport_sas 33021 1 mptsas

    Read the article

  • Is my Cisco switch port bad?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • Command-line connect to wired network for Ubuntu

    - by Tim
    I like to know how to use command-line to connect to a wired network in general for Ubuntu 8.10? In my case, I connect a cable to my laptop but it doesn't work with my WICD. So I like to try command-line method. Here is the ifconfig of my network adapters: $ ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:9f:8d:23:74 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x1800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4457 errors:0 dropped:0 overruns:0 frame:0 TX packets:4457 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:493002 (493.0 KB) TX bytes:493002 (493.0 KB) wlan0 Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 RX packets:1508929 errors:0 dropped:0 overruns:0 frame:0 TX packets:768144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:806027375 (806.0 MB) TX bytes:78834873 (78.8 MB) wlan0:avahi Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 inet addr:169.254.5.92 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 wmaster0 Link encap:UNSPEC HWaddr 00-0E-9B-AB-56-19-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks and regards! UPDATE: Tried what oyvindio suggested. Here is the failing message: $ sudo dhclient3 eth0 There is already a pid file /var/run/dhclient.pid with pid 18279 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:c0:9f:8d:23:74 Sending on LPF/eth0/00:c0:9f:8d:23:74 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

    Read the article

  • Why is mount -a not mounting fuse drive properly when executed remotely (via Fabric)?

    - by Jim D
    This is a weird bug and I'm not sure where it's coming from. Here's a quick run down of what I'm doing. I'm trying to mount a FUSE drive to an Amazon EC2 instance running Ubuntu 10.10 using s3fs (FUSE over Amazon). s3fs is compiled from source according to the instructions etc. I've also added an entry to /etc/fstab so that the drive mounts on boot. Here's what /etc/fstab looks like: # /etc/fstab: static file system information. # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 LABEL=uec-rootfs / ext4 defaults 0 0 /dev/sda2 /mnt auto defaults,nobootwait,comment=cloudconfig 0 2 /dev/sda3 none swap sw,comment=cloudconfig 0 0 s3fs#mybucket /mnt/s3/mybucket fuse default_acl=public-read,use_cache=/tmp,allow_other 0 0 So the good news is that this works fine. On reboot the connection mounts correctly. I can also do: $ sudo umount /mnt/s3/mybucket $ sudo mount -a $ mountpoint /mnt/s3/mybucket /mnt/s3/mybucket is a mountpoint Great, right? Well here's the problem. I'm using Fabric to automate the process of building and managing this instance. I noticed I was getting this error message when using Fabric to build s3fs and set up the mount process: mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected I isolated it down the the problem and built a fabric task that reproduces the problem: def remount_s3fs(): sudo("mount -a") Which does: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: mount -a [And yes, I was sure to unmount it before running this task.] When I check the mount using mountpoint I get: $ mountpoint /mnt/s3/mybucket mountpoint: /mnt/s3/mybucket: Transport endpoint is not connected Done. But if I run sudo mount -a at the command line, it works. Hrm. Here is that fab task output again, this time in full debug mode: [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] Executing task 'remount_s3fs' [ec2-xx-xx-xx-xx.compute-1.amazonaws.com] sudo: sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a" Again, I get that transport endpoint not connected error. I've also tried copying and pasting the exact command run into my ssh session (i.e. sudo -S -p 'sudo password:' /bin/bash -l -c "mount -a") and it works fine. So...that's my problem. Any ideas?

    Read the article

  • How to install missing Sound Drivers in Ubuntu?

    - by Sakamoto Kazuma
    I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

    Read the article

  • Different files on shared partition?

    - by Matt Robertson
    I am dual-booting Windows 8 and Ubuntu 12.04. My partition scheme looks like this: /dev/sda1 - Windows 8 (nfts) /dev/sda2 - Ubuntu / (ext4) /dev/sda3 - Ubuntu home (ext4) /dev/sda5 - swap /dev/sda6 - Shared data partition (exfat) (First off, yes I do have exfat libraries installed on Ubuntu) I created some PNG images in Windows and saved them on my shared partition. From Ubuntu, I edited the images in GIMP and saved them (replacing the ones on the shared partition). When I boot into Windows, the files appear unchanged - exactly like they did before I edited them from Ubuntu. I even added a folder and deleted some other files, but none of these changes exist in Windows. When I boot into Ubuntu, all of the changes are still there. It is as if Windows is caching the old file structure... How is this possible? Thanks in advance. Edit -- commands output ~~ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465.8G 0 disk +-sda1 8:1 0 165.1G 0 part +-sda2 8:2 0 21.3G 0 part / +-sda3 8:3 0 98.9G 0 part /home +-sda4 8:4 0 1K 0 part +-sda5 8:5 0 7.8G 0 part [SWAP] +-sda6 8:6 0 172.7G 0 part /mnt/shared_data ~~ /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # /dev/sda2 UUID=8f700f65-b5c7-4afc-a6fb-8f9271e0fb5e / ext4 errors=remount-ro 0 1 # /dev/sda3 UUID=f0d688b7-22bd-4fa7-bc1b-a594af2933fa /home ext4 defaults 0 2 # /dev/sda5 UUID=3bc2399b-5deb-4f04-924b-d4fc77491997 none swap sw 0 0 # /dev/sda6 UUID=F2DE-BC47 /mnt/shared_data exfat defaults 0 3 ~~ /etc/mtab /dev/sda2 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /home ext4 rw 0 0 /dev/sda6 /mnt/shared_data fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matt/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matt 0 0

    Read the article

  • System failure - need diagnostic recommendation

    - by Ladislav Mrnka
    I have big problem with my computer. Configuration is: Intel i7 + 6x2GB OCZ DDR3 Motheboard: Asus P6T Deluxe V2, HDD controller configured to AHCI Main drive: OCZ Vertex 2 (SSD) - contains all installed programs and system Second drive: Samsung SpinPoint - contains User profiles, ProgramData, virtual machines and databases Third drive: Samsung SpinPoint - data drive + backups OS: Windows 7 Ultimate x64 I have never had any problem with this computer until now. During weekend my computer completely crashed without any reason. Each time I tried to boot to Windows I got BSOD with message BAD_SYSTEM_CONFIG_INFO and automatic restart (I didn't install any new SW or HW). But after restart main OCZ drive was disconnected (not detected by BIOS). When I turned off and on computer, the drive was again connected. It also happend every single time I tried to repair installation somehow. It ended with some error and after restart drive was disconnected. The only thing which worked was format + fresh install. After installing almost everything I wanted to install Visual Studio 2010 Ultimate (complete installation without SQL Server Express). During installation of VS itself I always get BSOD - it is too fast so I'm not able to read description. After restart it searches for all disk drives for really long time and sometimes it changes boot drive so the system is not able to start - Bootmgr not found. After reconfiguring BIOS the system starts. There is no event describing the failure in Event viewer. Installing VS 2010 is absolutely necessary for me. I need help with diagnostic. I need to find where is the problem - I expect that the problem is in OCZ drive or in HDD controller on motherboard but I don't know how to find it. All components still have valid warranty. Can you recommend me some approach or tools to find the problem? Edit: I'm still looking for source of the problem. New information is that Windows are not able to perform check disk (Chkdsk) on the SSD system drive. After restarting it always starts checking drive and in part where files are checked it fails with BSOD - BAD_SYSTEM_CONFIG_INFO. After next restart and skipping check disk tests the system runs.

    Read the article

  • How to temporary disable a mirror video driver in windows xp registry

    - by happy clicker
    Because its a lot of text, I will ask first my question and then explain what the base problem is. Perhaps someone can give me a solution to the base problem: Is there is a way to temporary disable mirror video drivers (through registry or so), without uninstalling the corresponding software. I tested changing the enumeration in LocalMachine\Hardware\DeviceMap\Video but after reboot always the old configuration is restored. Explanation of the base problem We are working on a wpf-project for a department of a big company. There we have the problem that WPF renders only in software mode, although the hardware they have, must support hardware rendering (Tier 2). After searching for a solution to the problem, we found out that direct 3d does not work properly and we think thats why WPF can only use SW-rendering. In dxdiag.exe the direct3d-acceleration is enabled, but if we start the test-routine it always fails saying that it has not enough memory (it says memory, not video memory!). I have seen there 3 different types of pc’s (they have some hundreds of each type) and every type shows the exactly same behavior. We tried to update all the drivers, also dx (Version 9.0c) and we searched a lot in the web but could not find a solution. All the pcs have Intel Dual-Core processors or better, one type has an Intel gma 9000 graphics card the other two types have actual ATI and NVidia graphic-cards with 256MB onboard memory. Also the system memory is at least 2GB. Windows is XPSP3. The pc’s are of two different manufacturers. Because we see the exactly same behavior on every computer of this three very different computer-types, we don’t think that this is a driver or a direct x problem. What we’ve found in other newsgroups is, that direct x could be disturbed through mirror-video drivers such as NetMeeting, VNC and other remote desktop-installations. In the registry, we see under LocalMachine\Hardware\DeviceMap\Video a lot of such mirror-entries and we find also the definitions in the CurrentControlSet\Control\Video-Section (However this drivers are not shown in the hardware panel of the os). We can have admin-rights to one of these computers to test if disabling these drivers would help, but we must not change the configuration so that some software does not work after the tests. Therefore I cannot uninstall any software because I have not the mediums, licenses or knowhow to reinstall those apps. The support of this company however will only begin to work, if I can tell them what the real problem is. Thats why we search for a way to disable these mirror-drivers (or a hint to solve the dx problem if we are on a false trace)

    Read the article

  • SQL Saturday #44 Huntington Beach Recap

    What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach.  It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location.  I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis).  It made me think about this: Price of all those cars: $ 150,000+.  Impacting the ability of people to learn: Priceless.  We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well.  That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Oracle Enterprise Manager Cloud Control 12c: Contributing to emerging Cloud standards

    - by Anand Akela
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Contributed by Tony Di Cenzo, Director for Standards Strategy and Architecture, and Mark Carlson, Principal Cloud Architect, for Oracle's Systems Management and Storage Products Groups . As one would expect of an industry leader, Oracle's participation in industry standards bodies is extensive. We participate in dozens of organizations that produce open standards which apply to our products, and our commitment to the success of these organizations is manifest in several way - we support them financially through our memberships; our senior engineers are active participants, often serving in leadership positions on boards, technical working groups and committees; and when it makes good business sense we contribute our intellectual property. We believe supporting the development of open standards is fundamental to Oracle meeting customer demands for product choice, seamless interoperability, and lowering the cost of ownership. Nowhere is this truer than in the area of cloud standards, and for the most recent release of our flagship management product, Oracle Enterprise Manager Cloud Control 12c (EM Cloud Control 12c). There is a fundamental rule that standards follow architecture. This was true of distributed computing, it was true of service-oriented architecture (SOA), and it's true of cloud. If you are familiar with Enterprise Manager it is likely to be no surprise that EM Cloud Control 12c is a source of technology that can be considered for adoption within cloud management standards. The reason, quite simply, is that the Oracle integrated stack architecture aligns with the cloud architecture models being adopted by the industry, and EM Cloud Control 12c has been developed to manage this architecture. EM Cloud Control 12c has facilities for managing the various underlying capabilities of the integrated stack in IaaS, PaaS, and SaaS clouds, and enables essential characteristics such as on-demand self-service provisioning, centralized policy-based resource management, integrated chargeback, and capacity planning, and complete visibility of the physical and virtual environment from applications to disk. Our most recent contribution in support of cloud management standards to come out of the EM Cloud Control 12c work was the Oracle Cloud Elemental Resource Model API. Oracle contributed the Elemental Resource Model API to the Distributed Management Task Force (DMTF) in 2011 where it was assigned to DMTF's Cloud Management Working Group (CMWG). The CMWG is considering the Oracle specification and those of several other vendors in their effort to produce a best practices specification for managing IaaS clouds. DMTF's Cloud Infrastructure Management Interface specification, called CIMI for short, is currently out for public review and expected to be released by DMTF later this year. We are proud to be playing an important role in the development of what is expected to become a major cloud standard. You can find more information on DMTF CIMI at http://dmtf.org/standards/cloud. You can find the work-in-progress release of CIMI at http://dmtf.org/content/cimi-work-progress-specifications-now-available-public-comment . The Oracle Cloud API specification is available on the Oracle Technology Network. You can find more information about the Oracle Cloud Elemental Resource Model API on the Oracle Technical Network (OTN), including a webcast featuring the API engineering manager Jack Yu (see TechCast Live: Inside the Oracle Cloud Resource Model API). If you have not seen this video we recommend you take the time to view it. Simply hover your cursor over the webcast title and control+click to follow the embedded link. If you have a question about the Oracle Cloud API or want to learn more about Oracle's participation in cloud management standards efforts drop us a line. We'd love to hear from you. The Enterprise Manager Standards Blogs are written by Tony Di Cenzo, Director for Standards Strategy and Architecture, and Mark Carlson, Principal Cloud Architect, for Oracle's Systems Management and Storage Products Groups. They can be reached at Tony.DiCenzo at Oracle.com and Mark.Carlson at Oracle.com respectively. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Windows 7 doesn't boot after Ubuntu install

    - by Omu
    I had windows 7 installed on my pc, then I installed Ubuntu 10.10/ During the installation process I have chosen to manually set my partitions: I set a 10GB drive for ubuntu root 1GB drive for swap and for boot drive I've chosen the one used by windows 7 Now I can boot ubuntu, I have the windows 7 option in the boot list, but when I choose Windows 7, it shows me a black screen for a second and returns back to boot screen. Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== = Windows is installed in the MBR of /dev/sda sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Grub 2 Boot sector info: Grub 2 is installed in the boot sector of sda1 and looks at sector 304908237 of the same hard drive for core.img, but core.img can not be found at this location. No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sda3: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda4: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 63 62,894,474 62,894,412 7 HPFS/NTFS /dev/sda2 62,894,478 291,579,749 228,685,272 7 HPFS/NTFS /dev/sda3 291,579,811 309,157,937 17,578,127 5 Extended /dev/sda5 291,579,813 309,157,937 17,578,125 83 Linux /dev/sda4 309,159,936 312,580,095 3,420,160 82 Linux swap / Solaris blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 1266BB2766BB0A8D ntfs /dev/sda2 BEDBF1147C76F703 ntfs DATA /dev/sda3: PTTYPE="dos" /dev/sda4 dd38226d-c7c9-4ae5-a726-6d18d34a22e4 swap /dev/sda5 e1dafd1c-f855-406b-8f9a-f9d527c70255 ext4 /dev/sda: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 1266bb2766bb0a8d chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda5 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda4 during installation UUID=dd38226d-c7c9-4ae5-a726-6d18d34a22e4 none swap sw 0 0 =================== sda5: Location of files loaded by Grub: =================== 156.1GB: boot/grub/core.img 156.3GB: boot/grub/grub.cfg 149.9GB: boot/initrd.img-2.6.35-22-generic 156.3GB: boot/vmlinuz-2.6.35-22-generic 149.9GB: initrd.img 156.3GB: vmlinuz

    Read the article

  • IBM "per core" comparisons for SPECjEnterprise2010

    - by jhenning
    I recently stumbled upon a blog entry from Roman Kharkovski (an IBM employee) comparing some SPECjEnterprise2010 results for IBM vs. Oracle. Mr. Kharkovski's blog claims that SPARC delivers half the transactions per core vs. POWER7. Prior to any argument, I should say that my predisposition is to like Mr. Kharkovski, because he says that his blog is intended to be factual; that the intent is to try to avoid marketing hype and FUD tactic; and mostly because he features a picture of himself wearing a bike helmet (me too). Therefore, in a spirit of technical argument, rather than FUD fight, there are a few areas in his comparison that should be discussed. Scaling is not free For any benchmark, if a small system scores 13k using quantity R1 of some resource, and a big system scores 57k using quantity R2 of that resource, then, sure, it's tempting to divide: is  13k/R1 > 57k/R2 ? It is tempting, but not necessarily educational. The problem is that scaling is not free. Building big systems is harder than building small systems. Scoring  13k/R1  on a little system provides no guarantee whatsoever that one can sustain that ratio when attempting to handle more than 4 times as many users. Choosing the denominator radically changes the picture When ratios are used, one can vastly manipulate appearances by the choice of denominator. In this case, lots of choices are available for the resource to be compared (R1 and R2 above). IBM chooses to put cores in the denominator. Mr. Kharkovski provides some reasons for that choice in his blog entry. And yet, it should be noted that the very concept of a core is: arbitrary: not necessarily comparable across vendors; fluid: modern chips shift chip resources in response to load; and invisible: unless you have a microscope, you can't see it. By contrast, one can actually see processor chips with the naked eye, and they are a bit easier to count. If we put chips in the denominator instead of cores, we get: 13161.07 EjOPS / 4 chips = 3290 EjOPS per chip for IBM vs 57422.17 EjOPS / 16 chips = 3588 EjOPS per chip for Oracle The choice of denominator makes all the difference in the appearance. Speaking for myself, dividing by chips just seems to make more sense, because: I can see chips and count them; and I can accurately compare the number of chips in my system to the count in some other vendor's system; and Tthe probability of being able to continue to accurately count them over the next 10 years of microprocessor development seems higher than the probability of being able to accurately and comparably count "cores". SPEC Fair use requirements Speaking as an individual, not speaking for SPEC and not speaking for my employer, I wonder whether Mr. Kharkovski's blog article, taken as a whole, meets the requirements of the SPEC Fair Use rule www.spec.org/fairuse.html section I.D.2. For example, Mr. Kharkovski's footnote (1) begins Results from http://www.spec.org as of 04/04/2013 Oracle SUN SPARC T5-8 449 EjOPS/core SPECjEnterprise2010 (Oracle's WLS best SPECjEnterprise2010 EjOPS/core result on SPARC). IBM Power730 823 EjOPS/core (World Record SPECjEnterprise2010 EJOPS/core result) The questionable tactic, from a Fair Use point of view, is that there is no such metric at the designated location. At www.spec.org, You can find the SPEC metric 57422.17 SPECjEnterprise2010 EjOPS for Oracle and You can also find the SPEC metric 13161.07 SPECjEnterprise2010 EjOPS for IBM. Despite the implication of the footnote, you will not find any mention of 449 nor anything that says 823. SPEC says that you can, under its fair use rule, derive your own values; but it emphasizes: "The context must not give the appearance that SPEC has created or endorsed the derived value." Substantiation and transparency Although SPEC disclaims responsibility for non-SPEC information (section I.E), it says that non-SPEC data and methods should be accurate, should be explained, should be substantiated. Unfortunately, it is difficult or impossible for the reader to independently verify the pricing: Were like units compared to like (e.g. list price to list price)? Were all components (hw, sw, support) included? Were all fees included? Note that when tpc.org shows IBM pricing, there are often items such as "PROCESSOR ACTIVATION" and "MEMORY ACTIVATION". Without the transparency of a detailed breakdown, the pricing claims are questionable. T5 claim for "Fastest Processor" Mr. Kharkovski several times questions Oracle's claim for fastest processor, writing You see, when you publish industry benchmarks, people may actually compare your results to other vendor's results. Well, as we performance people always say, "it depends". If you believe in performance-per-core as the primary way of looking at the world, then yes, the POWER7+ is impressive, spending its chip resources to support up to 32 threads (8 cores x 4 threads). Or, it just might be useful to consider performance-per-chip. Each SPARC T5 chip allows 128 hardware threads to be simultaneously executing (16 cores x 8 threads). The Industry Standard Benchmark that focuses specifically on processor chip performance is SPEC CPU2006. For this very well known and popular benchmark, SPARC T5: provides better performance than both POWER7 and POWER7+, for 1 chip vs. 1 chip, for 8 chip vs. 8 chip, for integer (SPECint_rate2006) and floating point (SPECfp_rate2006), for Peak tuning and for Base tuning. For example, at the 8-chip level, integer throughput (SPECint_rate2006) is: 3750 for SPARC 2170 for POWER7+. You can find the details at the March 2013 BestPerf CPU2006 page SPEC is a trademark of the Standard Performance Evaluation Corporation, www.spec.org. The two specific results quoted for SPECjEnterprise2010 are posted at the URLs linked from the discussion. Results for SPEC CPU2006 were verified at spec.org 1 July 2013, and can be rechecked here.

    Read the article

  • using isight camera in macbookpro(8,2) on ubuntu 12.04 virtualbox VM

    - by Kurt Spindler
    I'm having a lot of trouble using the built-in isight camera on my macbookpro8,2 (early 2011) from an ubuntu 12.04 virtual machine, run inside VirtualBox. The following is the log I get when I try to run guvcview ubuntu@ubuntu:~$ guvcview guvcview 1.5.3 ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71 ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. FaceTime HD Camera (Built-in) (location: usb-0000:00:0b.0-1) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/10, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, vid:05ac pid:8509 driver:uvcvideo checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls no codec detected for H264 no codec detected for MP3 - (lavc) Checking video mode 960x540@32bpp : OK Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable write /home/ubuntu/.guvcviewrc OK free controls cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK ubuntu@ubuntu:~$ Any help would be greatly appreciated. Only clue I have is that I initially was having problems, tried using the old method of fixing isights (involving installing isight-firmware-tools) before realizing that I just hadn't turned on the VM setting to allow the VM to access the webcam. :) Anyway, I wonder if installing that messed something up. However, I think this is a red herring because I've: shut down and turned back on the Mac, restarted the VM, tried a different VM (for which I never installed isight-firmware-tools, and created an entirely new ubuntu vm. All instances have had this problem. Similarly, other viewers, such as cheese, avplay, avconv have had all various kinds of errors.

    Read the article

  • Sound issues after trying everything

    - by Lerp
    I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

    Read the article

  • How do I resolve this exercise on C++? [closed]

    - by user40630
    (Card Shuffling and Dealing) Create a program to shuffle and deal a deck of cards. The program should consist of class Card, class DeckOfCards and a driver program. Class Card should provide: a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. The driver program should create a DeckOfCards object, shuffle the cards, then deal the 52 cards. This above is the exercise I'm trying to solve. I'd be very much appreciated if someone could solve it and explain it to me. The main idea of the program is quite simple. What I don't get is how to build the constructor for the class DeckOfCards and how to generate the 52 cards of the deck with different suits and faces. Untill now I've managed to do this: #include <iostream> #include <vector> using namespace std; /* * */ /* a) Data members face and suit of type int. b) A constructor that receives two ints representing the face and suit and uses them to initialize the data members. c) Two static arrays of strings representing the faces and suits. d) A toString function that returns the Card as a string in the form “face of suit.” You can use the + operator to concatenate strings. */ class Card { public: Card(int, int); string toString(); private: int suit, face; static string faceNames[13]; static string suitNames[4]; }; string Card::faceNames[13] = {"Ace","Two","Three","Four","Five","Six","Seven","Eight","Nine","Ten","Queen","Jack","King"}; string Card::suitNames[4] = {"Diamonds","Clubs","Hearts","Spades"}; string Card::toString() { return faceNames[face]+" of "+suitNames[suit]; } Card::Card(int f, int s) :face(f), suit(s) { } /* Class DeckOfCards should contain: a) A vector of Cards named deck to store the Cards. b) An integer currentCard representing the next card to deal. c) A default constructor that initializes the Cards in the deck. The constructor should use vector function push_back to add each Card to the end of the vector after the Card is created and initialized. This should be done for each of the 52 Cards in the deck. d) A shuffle function that shuffles the Cards in the deck. The shuffle algorithm should iterate through the vector of Cards. For each Card, randomly select another Card in the deck and swap the two Cards. e) A dealCard function that returns the next Card object from the deck. f) A moreCards function that returns a bool value indicating whether there are more Cards to deal. */ class DeckOfCards { public: DeckOfCards(); void shuffleCards(); Card dealCard(); bool moreCards(); private: vector<Card> deck(52); int currentCard; }; int main(int argc, char** argv) { return 0; } DeckOfCards::DeckOfCards() { //I'm stuck here I have no idea of what to take out of here. //I still don't fully get the idea of class inside class and that's turning out as a problem. I try to find a way to set the suits and faces members of the class Card but I can't figure out how. for(int i=0; i<deck.size(); i++) { deck[i]//....There is no function to set them. They must be set when initialized. But how?? } } For easier reading: http://pastebin.com/pJeXMH0f

    Read the article

  • About Solaris 11 and UltraSPARC II/III/IV/IV+

    - by nospam(at)example.com (Joerg Moellenkamp)
    I know that I will get the usual amount of comments like "Oh, Jörg ? you can't be negative about Oracle" for this article. However as usual I want to explain the logic behind my reasoning. Yes ? I know that there is a lot of UltraSPARC III, IV and IV+ gear out there. But there are some very basic questions: Does your application you are currently running on this gear stops running just because you can't run Solaris 11 on it? What is the need to upgrade a system already in production to Solaris 11? I have the impression, that some people think that the systems get useless in the moment Oracle releases Solaris 11. I know that Sun sold UltraSPARC IV+ systems until 2009. The Sun SF490 introduced 2004 for example, that was a Sun SF480 with UltraSPARC IV and later with UltraSPARC IV+. And yes, Sun made some speedbumps. At that time the systems of the UltraSPARC III to IV+ generations were supported on Solaris 8, on Solaris 9 and on Solaris 10. However from my perspective we sold them to customers, which weren't able to migrate to Solaris 10 because they used applications not supported on Solaris 9 or who just didn't wanted to migrate to Solaris 10. Believe it or not ? I personally know two customers that migrated core systems to Solaris 10 in ? well 2008/9. This was especially true when the M3000 was announced in 2008 when it closed the darned single socket gap. It may be different at you site, however that's what I remember about that time when talking with customers. At first: Just because there is no Solaris 11 for UltraSPARC III, IV and IV+, it doesn't mean that Solaris 10 will go away anytime soon. I just want to point you to "Expect Lifetime Support - Hardware and Operating Systems". It states about Premier Support:Maintenance and software upgrades are included for Oracle operating systems and Oracle VM for a minimum of eight years from the general availability date.GA for Solaris 10 was in 2005. Plus 8 years ? 2013 ? at minimum. Then you can still opt for 3 years of "Extended Support" ? 2016 ? at minimum. 2016 your systems purchased in 2009 are 7 years old. Even on systems purchased at the very end of the lifetime of that system generation. That are the rules as written in the linked document. I said minimum The actual dates are even further in the future: Premier Support for Solaris 10 ends in 2015, Extended support ends 2018. Sustaining support ? indefinite. You will find this in the document "Oracle Lifetime Support Policy: Oracle Hardware and Operating Systems".So I don't understand when some people write, that Oracle is less protective about hardware investments than Sun. And for hardware it's the same as with Sun: Service 5 years after EOL as part of Premier Support. I would like to write about a different perspective as well: I have to be a little cautious here, because this is going in the roadmap area, so I will mention the public sources here: John Fowler told last year that we have to expect at at least 3x the single thread performance of T3 for T4. We have 8 cores in T4, as stated by Rick Hetherington. Let's assume for a moment that a T4 core will have the performance of a UltraSPARC core (just to simplify math and not to disclosing anything about the performance, all existing SPARC cores are considered equal). So given this pieces of information, you could consolidate 8 V215, 4 or 8 V245, 2 full blown V445,2 full blown 490, 2 full blown M3000 on a single T4 SPARC processor. The Fowler roadmap prezo talked about 4-socket systems with T4. So 32 V215, 16 to 8 V245, 8 fullblown V445, 8 full blown V490, 8 full blown M3000 in a system image. I think you get the idea. That said, most of the systems we are talking about have already amortized and perhaps it's just time to invest in new systems to yield other advantages like reduced space consumptions, like reduced power consumption, like some of the neat features sun4v gives you, and yes ? reduced number of processor licenses for Oracle and less money for Oracle HW/SW support. As much as I dislike it myself that my own UltraSPARC III and UltraSPARC II based systems won't run on Solaris 11 (and I have quite a few of them in my personal lab), I really think that the impact on production environments will be much less than most people think now. By the way: The reason for this move is a quite significant new feature. I will tell you that it was this feature, when it's out. I assume, telling just a word more could lead to much more time to blog.

    Read the article

  • Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

    - by zewone
    I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686 ![Schizophrenic Ubuntu](http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

    Read the article

  • Existential CAML - does an item exist?

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved More CAML and existence. In “SharePoint List Issues” and “Passing the CAML thru the EY of the NEEDL we saw how to use CAML to return a subset of a list and also how to check the existence of lists, fields, defaults, and values.   Here is a general function that may be used to get a subset of a list by comparing a “text” type field to a given value.  The function is pretty smart. It can be used to check existence or to return a collection of items that may be further processed. It handles non existing fields and replaces them with the ubiquitous “Title”, but only once!  /// Build an SPQuery that returns a selected set of columns from a List /// titleField must be a "Text" type field /// When the titleField parameter is empty ("") "Title" is assumed /// When the title parameter is empty ("") All is assumed /// When the columnNames parameter is null, the query returns all the fields /// When the rowLimit parameter is 0, the query return all the items. /// with a non-zero, the query returns at most rowLimits /// /// usage: to check if an item titled "Blah" exists in your list, do: /// colNames = {"Title"} /// col = GetListItemColumnByTitle(myList, "", "Blah", colNames, 1) /// Check the col.Count. if > 0 the item exists and is in the collection private static SPListItemCollection GetListItemColumnByTitle(SPList list, string titleField, string title, string[] columnNames, uint rowLimit) {   try   {     char QT = Convert.ToChar((int)34);     SPQuery query = new SPQuery();     if (title != "")     {       string tf = titleField;       if (titleField == "") tf = "Title";       tf = CAMLThisName(list, tf, "Title");        StringBuilder titleQuery = new StringBuilder  ("<Where><Eq><FieldRef Name=");       titleQuery.Append(QT);       titleQuery.Append(tf);       titleQuery.Append(QT);       titleQuery.Append("/><Value Type=");       titleQuery.Append(QT);       titleQuery.Append("Text");       titleQuery.Append(QT);       titleQuery.Append(">");       titleQuery.Append(title);       titleQuery.Append("</Value></Eq></Where>");       query.Query = titleQuery.ToString();     }     if (columnNames.Length != 0)     {       StringBuilder sb = new StringBuilder("");       bool TitleAlreadyIncluded = false;       foreach (string columnName in columnNames)       {         string tst = CAMLThisName(list, columnName, "Title");         //Allow Title only once         if (tst != "Title" || !TitleAlreadyIncluded)         {           sb.Append("<FieldRef Name=");           sb.Append(QT);           sb.Append(tst);           sb.Append(QT);           sb.Append("/>");           if (tst == "Title") TitleAlreadyIncluded = true;         }       }       query.ViewFields = sb.ToString();     }     if (rowLimit > 0)     {        query.RowLimit = rowLimit;     }     SPListItemCollection col = list.GetItems(query);     return col;   }   catch (Exception ex)   {     //Console.WriteLine("GetListItemColumnByTitle" + ex.ToString());     //sw.WriteLine("GetListItemColumnByTitle" + ex.ToString());     return null;   } } Here I called it for a list in which “Author” (it is the internal name for “Created”) and “Blah” do not exist. The list of column names is:  string[] columnNames = {"Test Column1", "Title", "Author", "Allow Multiple Ratings", "Blah"};  So if I use this call, I get all the items for which “01-STD MIL_some” has the value of 1. the fields returned are: “Test Column1”, “Title”, and “Allow Multiple Ratings”. Because “Title” was already included and the default for non exixsting is “Title”, it was not replicated for the 2 non-existing fields.  SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 0); The following call checks if there are any items where “01-STD MIL_some” has the value of “1”. Note that I limited the number of returned items to 1.  SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 1); The code also uses the CAMLThisName function that checks for an existence of a field and returns its InternalName. This is yet another useful function that I use again and again.  /// <summary> /// return a fields internal name (CAMLName)  /// or the "default" name that you passed. /// To check existence pass "" or some funny name like "mud in your eye" /// </summary> public static string CAMLThisName(SPList list, string name, string def) {   String CAMLName = def;   SPField fld = GetFieldByName(list, name);   if (fld != null)   {      CAMLName = fld.InternalName;   }   return CAMLName; } That’s all folks?!

    Read the article

  • Is software support an option for your career?

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 If you have a technical background, why should you choose a career in support? We have invited Serban to answer these questions and to give us an overview of one of the biggest technical teams in Oracle Romania. He’s been with Oracle for 7 years leading the local PeopleSoft Financials & Supply Chain Support team. Back in 2013 Serban started building a new support team in Romania – Fusion HCM. His current focus is building a strong support team for Fusion HCM, latest solution for Business HR Professionals from Oracle. The solution is offered both on Premise (customer site installation) but more important as a Cloud offering – SaaS.  So, why should a technical person choose Software Support over other technical areas?  “I think it is mainly because of the high level of technical skills required to provide the best technical solutions to our customers. Oracle Software Support covers complex solutions going from Database or Middleware to a vast area of business applications (basically covering any needs that a large enterprise may have). Working with such software requires very strong skills both technical and functional for the different areas, going from Finance, Supply Chain Management, Manufacturing, Sales to other very specific business processes. Our customers are large enterprises that already have a support layer inside their organization and therefore the Oracle Technical Support Engineers are working with highly specialized staff (DBA’s, System/Application Admins, Implementation Consultants). This is a very important aspect for our engineers because they need to be highly skilled to match our customer’s specialist’s expectations”.  What’s the career path in your team? “Technical Analysts joining our teams have a clear growth path. The main focus is to become a master of the product they will support. I think one need 1 or 2 years to reach a good level of understanding the product and delivering optimal solutions because of the complexity of our products. At a later stage, engineers can choose their professional development areas based on the business needs and preferences and then further grow towards as technical expert or a management role. We have analysts that have more than 15 years of technical expertise and they still learn and grow in technical area. Important fact is, due to the expansion of the Romanian Software support center, there are various management opportunities. So, if you want to leverage your experience and if you want to have people management responsibilities Oracle Software Support is the place to be!”  Our last question to Serban was about the benefits of being part of Oracle Software Support. Here is what he said: “We believe that Oracle delivers “State of the art” Support level to our customers. This is not possible without high investment in our staff. We commit from the start to support any technical analyst that joins us (being junior or very senior) with any training needs they have for their job. We have various technical trainings as well as soft-skills trainings required for a customer facing professional to be successful in his role. Last but not least, we’re aiming to make Oracle Romania SW Support a global center of excellence which means we’re investing a lot in our employees.”  If you’re looking for a job where you can combine your strong technical skills with customer interaction Oracle Software Support is the place to be! Send us your CV at [email protected]. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Linq to List and IEnumerable issues

    - by Otaku
    I am querying an HTML file with Linq. It looks something like this: <html> <body> <div class="Players"> <div class="role">Goalies</div> <div class="name">John Smith</div> <div class="name">Shawn Xie</div> <div class="role">Right Wings</div> <div class="name">Jack Davis</div> <div class="name">Carl Yuns</div> <div class="name">Wayne Gortonia</div> <div class="role">Centers</div> <div class="name">Lutz Gaspy</div> <div class="name">John Jacobs</div> </div </html> </body> What I'm trying to do is create a list of these folks like in a list of a structure called Players: Structure Players Public Name As String Public Position As String End Structure But I've quickly found out I don't really know what I'm doing when it comes to Linq. I've got this far my my queries: Dim goalieList = From d In player.Elements _ Where d.Value = "Goalies" _ Select From g In d.ElementsAfterSelf _ Take While (g.@class <> "role") _ Select New Players With {.Position = "Goalie", _ .Name = g.Value} Dim centersList = From d In player.Elements _ Where d.Value = "Centers" _ Select From g In d.ElementsAfterSelf _ Take While (g.@class <> "role") _ Select New Players With {.Position = "Centers", _ .Name = g.Value} Which gets me down to the the players by position, but then I can't do much with this afterwards the result type is System.Collections.Generic.IEnumerable(Of System.Collections.Generic.IEnumerable(Of Player)) What I want to do is add these two results to a new list, like: Dim playersList As List(Of Players) = Nothing playersList.AddRange(centersList) playersList.AddRange(goalieList) So that I can then query the list and use it. But it kicks the error: Unable to cast object of type 'WhereSelectEnumerableIterator2[System.Xml.Linq.XElement,System.Collections.Generic.IEnumerable1[Players]]' to type 'System.Collections.Generic.IEnumerable`1[Players]' As you can see, I may really have no idea how to work with all these objects/classes. Does anyone have any insight on what I may be doing wrong and how I can resolve it? RESOLVED: The Linq query needs to return a single iEnumerable, like this: Dim goalieList = From l In _ (From d In players.Elements _ Where d.Value = "Goalies" _ Select d.ElementsAfterSelf.TakeWhile(Function(f) f.@class <> "role")) _ Select New Players With {.Position = "Goalie", .Name = l.Value} and then use goalieList.ToList

    Read the article

  • Mouse scroll not working in a scroll viewer with a wpf datagrid and additional UI elements

    - by paladugu457
    I am trying to figure out how to get the mouse scroll working on a wpf window with a scrollviewer and a datagrid within it. The WPF and C# code is below <ScrollViewer HorizontalScrollBarVisibility="Disabled" VerticalScrollBarVisibility="Auto"> <Grid> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <Grid Grid.Row="0"> <Border Name="DataGridBorder" BorderThickness="2" Margin="1" CornerRadius="4" BorderBrush="#FF080757"> <dg:DataGrid AutoGenerateColumns="False" Name="ValuesDataGrid" BorderThickness="0" CanUserResizeColumns="True" FontWeight="Bold" HorizontalScrollBarVisibility="Auto" CanUserReorderColumns="False" IsReadOnly="True" IsTextSearchEnabled="True" AlternationCount="2" SelectionMode="Extended" GridLinesVisibility="All" HeadersVisibility="Column" CanUserAddRows="False" CanUserDeleteRows="False" CanUserResizeRows="False" CanUserSortColumns="False" RowDetailsVisibilityMode="Collapsed" SelectedIndex="0" RowStyle="{StaticResource CognitiDataGridRowStyle}" > <dg:DataGrid.Columns> <dg:DataGridTemplateColumn Header="Title" > <dg:DataGridTemplateColumn.CellTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" > <TextBlock HorizontalAlignment="Left" VerticalAlignment="Center" Text="{Binding Path=Name}" FontWeight="Normal" /> </StackPanel> </DataTemplate> </dg:DataGridTemplateColumn.CellTemplate> </dg:DataGridTemplateColumn> </dg:DataGrid.Columns> </dg:DataGrid> </Border> </Grid> <Button Grid.Row="1" Height="90" >hello world</Button> </Grid> </ScrollViewer> and the C# code is as follows public partial class Window1 : Window { public Window1() { InitializeComponent(); initialize(); } public void initialize() { ObservableCollection<MyObject> testList = new ObservableCollection<MyObject>(); for (int i = 0; i < 20; i++) { MyObject my = new MyObject("jack " + i); testList.Add(my); } ValuesDataGrid.ItemsSource = testList; } } public class MyObject { public string Name { get; set; } public MyObject(string name) { Name = name; } } The problem i am facing is that when using the mouse to scroll, it works fine when it is over the button but as soon as i move the mouse pointer over the grid and try to scroll, nothing happens. I am able to move the scrollbar of the scrollviewer directly though. I am still a wpf novice so any help on how to get the mouse scroll to work over the datagrid would be appreciated. I am guessing there should be a pretty easy solution for this but I havent been able to figure it out

    Read the article

  • How to interpolate hue values in HSV colour space?

    - by nick
    Hi, I'm trying to interpolate between two colours in HSV colour space to produce a smooth colour gradient. I'm using a linear interpolation, eg: h = (1 - p) * h1 + p * h2 s = (1 - p) * s1 + p * s2 v = (1 - p) * v1 + p * v2 (where p is the percentage, and h1, h2, s1, s2, v1, v2 are the hue, saturation and value components of the two colours) This produces a good result for s and v but not for h. As the hue component is an angle, the calculation needs to work out the shortest distance between h1 and h2 and then do the interpolation in the right direction (either clockwise or anti-clockwise). What formula or algorithm should I use? EDIT: By following Jack's suggestions I modified my JavaScript gradient function and it works well. For anyone interested, here's what I ended up with: // create gradient from yellow to red to black with 100 steps var gradient = hsbGradient(100, [{h:0.14, s:0.5, b:1}, {h:0, s:1, b:1}, {h:0, s:1, b:0}]); function hsbGradient(steps, colours) { var parts = colours.length - 1; var gradient = new Array(steps); var gradientIndex = 0; var partSteps = Math.floor(steps / parts); var remainder = steps - (partSteps * parts); for (var col = 0; col < parts; col++) { // get colours var c1 = colours[col], c2 = colours[col + 1]; // determine clockwise and counter-clockwise distance between hues var distCCW = (c1.h >= c2.h) ? c1.h - c2.h : 1 + c1.h - c2.h; distCW = (c1.h >= c2.h) ? 1 + c2.h - c1.h : c2.h - c1.h; // ensure we get the right number of steps by adding remainder to final part if (col == parts - 1) partSteps += remainder; // make gradient for this part for (var step = 0; step < partSteps; step ++) { var p = step / partSteps; // interpolate h var h = (distCW <= distCCW) ? c1.h + (distCW * p) : c1.h - (distCCW * p); if (h < 0) h = 1 + h; if (h > 1) h = h - 1; // interpolate s, b var s = (1 - p) * c1.s + p * c2.s; var b = (1 - p) * c1.b + p * c2.b; // add to gradient array gradient[gradientIndex] = {h:h, s:s, b:b}; gradientIndex ++; } } return gradient; }

    Read the article

  • creating executable jar file for my java application

    - by Manu
    public class createExcel { public void write() throws IOException, WriteException { WorkbookSettings wbSettings = new WorkbookSettings(); wbSettings.setLocale(new Locale("en", "EN")); WritableWorkbook workbook1 =Workbook.createWorkbook(new File(file), wbSettings); workbook1.createSheet("Niru ", 0); WritableSheet excelSheet = workbook1.getSheet(0); createLabel(excelSheet); createContent(excelSheet,list); workbook1.write(); workbook1.close(); } public void createLabel(WritableSheet sheet)throws WriteException { WritableFont times10pt = new WritableFont(WritableFont.createFont("D:\font\trebuct"),8); // Define the cell format times = new WritableCellFormat(times10pt); // Lets automatically wrap the cells times.setWrap(false); WritableFont times10ptBoldUnderline = new WritableFont( WritableFont.createFont("D:\font\trebuct"), 9, WritableFont.BOLD, false, UnderlineStyle.NO_UNDERLINE); timesBoldUnderline = new WritableCellFormat(times10ptBoldUnderline); sheet.setColumnView(0,15); sheet.setColumnView(1,13); // Write a few headers addCaption(sheet, 0, 0, "Business Date"); addCaption(sheet, 1, 0, "Dealer ID"); } private void createContent(WritableSheet sheet, ArrayList list) throws WriteException,RowsExceededException { // Write a few number for (int i = 1; i < 11; i++) { for(int j=0;j<11;j++){ // First column addNumber(sheet, i, j,1); // Second column addNumber(sheet, 1, i, i * i); } } } private void addCaption(WritableSheet sheet, int column, int row, String s) throws RowsExceededException, WriteException { Label label; label = new Label(column, row, s, timesBoldUnderline); sheet.addCell(label); } private void addNumber(WritableSheet sheet, int row,int column, Integer integer) throws WriteException, RowsExceededException { Number number; number = new Number(column,row, integer, times); sheet.addCell(number); } public static void main(String[] args) { JButton myButton0 = new JButton("Advice_Report"); JButton myButton1 = new JButton("Position_Report"); JPanel bottomPanel = new JPanel(); bottomPanel.add(myButton0); bottomPanel.add(myButton1); myButton0.addActionListener(this); myButton1.addActionListener(this); createExcel obj=new createExcel(); obj.setOutputFile("c;\\temp\\swings\\jack.xls"); try{ obj.write(); }catch(Exception e){} } and so on. it working fine. i have jxl.jar and ojdbc14.jar files(need this jar file for Excelsheet creation and DB connection )and createExcel.class(.class file) file. how to make this code as executable jar file.

    Read the article

  • Fread binary file dynamic size string [C]

    - by Blackbinary
    I've been working on this assignment, where I need to read in "records" and write them to a file, and then have the ability to read/find them later. On each run of the program, the user can decide to write a new record, or read an old record (either by Name or #) The file is binary, here is its definition: typedef struct{ char * name; char * address; short addressLength, nameLength; int phoneNumber; }employeeRecord; employeeRecord record; The way the program works, it will store the structure, then the name, then the address. Name and address are dynamically allocated, which is why it is necessary to read the structure first to find the size of the name and address, allocate memory for them, then read them into that memory. For debugging purposes I have two programs at the moment. I have my file writing program, and file reading. My actual problem is this, when I read a file I have written, i read in the structure, print out the phone # to make sure it works (which works fine), and then fread the name (now being able to use record.nameLength which reports the proper value too). Fread however, does not return a usable name, it returns blank. I see two problems, either I haven't written the name to the file correctly, or I haven't read it in correctly. Here is how i write to the file: where fp is the file pointer. record.name is a proper value, so is record.nameLength. Also i am writing the name including the null terminator. (e.g. 'Jack\0') fwrite(&record,sizeof record,1,fp); fwrite(record.name,sizeof(char),record.nameLength,fp); fwrite(record.address,sizeof(char),record.addressLength,fp); And i then close the file. here is how i read the file: fp = fopen("employeeRecord","r"); fread(&record,sizeof record,1,fp); printf("Number: %d\n",record.phoneNumber); char *nameString = malloc(sizeof(char)*record.nameLength); printf("\nName Length: %d",record.nameLength); fread(nameString,sizeof(char),record.nameLength,fp); printf("\nName: %s",nameString); Notice there is some debug stuff in there (name length and number, both of which are correct). So i know the file opened properly, and I can use the name length fine. Why then is my output blank, or a newline, or something like that? (The output is just Name: with nothing after it, and program finishes just fine) Thanks for the help.

    Read the article

  • :contains for multiple words

    - by Emin
    I am using the following jQuery var etag='kate' if (etag.length > 0) { $('div').each(function () { $(this).find('ul:not(:contains(' + etag + '))').hide(); $(this).find('ul:contains(' + etag + ')').show(); }); }? towards the following HTML <div id="2"> <ul> <li>john</li> <li>jack</li> </ul> <ul> <li>kate</li> <li>clair</li> </ul> <ul> <li>hugo</li> <li>desmond</li> </ul> <ul> <li>said</li> <li>jacob</li> </ul> </div> <div id="3"> <ul> <li>jacob</li> <li>me</li> </ul> <ul> <li>desmond</li> <li>george</li> </ul> <ul> <li>allen</li> <li>kate</li> </ul> <ul> <li>salkldf</li> <li>3kl44</li> </ul> </div> basically, as long as etag has one word, the code works perfectly and hides those elements who do not contain etag. My problem is, when etag is multiple words (and I don't have control over it. Its coming from a database and could be combination of multiple words seperated with space char) then the code does not work.. is there any way to achieve this?

    Read the article

< Previous Page | 61 62 63 64 65 66 67  | Next Page >