Search Results

Search found 2239 results on 90 pages for 'opera mini'.

Page 65/90 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • How do I get an Enter USB TV Box TV tuner aka Gadmei UTV302 to work?

    - by Subhash
    Has anyone had any success in using the Enter USB TV Box from Enter Multimedia? It comes bundled with software that works in Windows. I have had no luck using it in Ubuntu 10.10. Update 1 Here is the output from lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 1f71:3301 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I can't find the Enter USB TV Box listed in this. In the dmesg tail command, I found something that seems to be related to the card: usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256 Update 2 From Windows I learned that this USB TV tuner uses some chipset from Gadmei corporation. All computer stores in India sell Enter USB TV Box if you ask for an USB TV tuner. No other brand seems to be interested in this market. Update 3 I learned that this TV tuner is rebranded version of Gadmei UTV302 (USB TV Tuner Box). Update 4 I tried adding em28xx as the chipset (as suggested by user BOBBO below) for the tuner but that did not work. I went back to my Pinnacle PCTV internal card. I don't think the tuner referred by UbuntuForums (Gadmei UTV 330) and the tuner that I have (Gadmei UTV 302) are the same. My USB tuner is several times bigger. My tuner seems to be a newer device with a newer tuner chip. I will submit details of this device to the LinuxTV developers this weekend. Update 5 I opened the tuner box and found that it uses a tuner from a Chinese company - Tenas. Model is TNF 8022-DFA. Update 6 Tuner chip specs (retrived from supplier directory) for Tenas TNF 8022-DFA. Supply voltage: true 5V device(low power dissipation) Control system: I2C bus control of tuning, address selection Tuning system: PLL controlled tuning Receiving system: system PAL D/K,IF(Intermediate Frequency): 38MHz Receiving channels: full frequency range from channel DS1 (49.75MHz) to channel DS57 (863.25MHz); Use Texas Instruments SN761678 IC solution, with mini install size Update 7 Reverse side of the circuit board. Picture of the TV tuner

    Read the article

  • Add a Scrollable Multi-Row Bookmarks Toolbar to Firefox

    - by Asian Angel
    If you keep a lot of bookmarks available in your Bookmarks Toolbar then you know that accessing some of them is not as easy as you would like. Now you can simplify the access process with the Multirow Bookmarks Toolbar for Firefox. Before As you can see it has not taken long to fill up our “Bookmarks Toolbar” and use of the drop-down list is required. If you do not keep too many bookmarks in the “Bookmarks Toolbar” then that may not be a bad thing but what if you have a very large number of bookmarks there? Multirow Bookmarks Toolbar in Action As soon as you have installed the extension and restarted Firefox you will see the default three rows display. If you are not worried about UI space then you are good to go. Those of you who like keeping the UI space to a minimum will want to have a look at this next part… You are not locked into a “three rows setup” with this extension. If you are ok with two rows then you can select for that in the “Options” and and enjoy a mini scrollbar on the right side. For our example we still had easy access to all three rows. Two rows still too much? Not a problem. Set the number of rows for one only in the “Options” and still enjoy that scrolling goodness. If you do select for one row only do not panic when you do not see a scrollbar…it is still there. Hold your mouse over where the scrollbar is shown in the image above and use your middle mouse button to scroll through the multiple rows. You can see the transition between the second and third rows on our browser here… Nice, huh? Options The “Options” are extremely easy to work with…just enable/disable the extension here and set the number of rows that you want visible. Conclusion While the Multirow Bookmarks Toolbar extension may not seem like much at first glance it does provide some nice flexibility for your “Bookmarks Toolbar”. You can save space and access your bookmarks easily without those drop-down lists. If you are looking for another great way to make the best use of the space available in your “Bookmarks Toolbar” then be sure to read our article on the Smart Bookmarks Bar extension for Firefox here. Links Download the Multirow Bookmarks Toolbar extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Reduce Your Bookmarks Toolbar to a Toolbar ButtonConserve Space in Firefox by Combining ToolbarsAdd the Bookmarks Menu to Your Bookmarks Toolbar with Bookmarks UI ConsolidatorAdd a Vertical Bookmarks Toolbar to FirefoxCondense the Bookmarks in the Firefox Bookmarks Toolbar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Dark Side of the Moon (8-bit) Norwegian Life If Web Browsers Were Modes of Transportation Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports

    Read the article

  • Friday Fun: Play Tetris in Google Chrome

    - by Asian Angel
    Do you prefer playing classic games rather than the newer ones? Then get ready for some classic goodness with the JC-Tetris extension for Google Chrome. JC-Tetris in Action When you click on your new “JC-Tetris Toolbar Button” a new mini-Chrome window will open with the game displayed inside. This could be very convenient for those who would like or need to pause the game, minimize the window, and finish the game later. All that is needed to play are the four “Arrow Keys & the Space Bar”. Note: The text was small when the window first opened during our test so we used the “Ctrl +” keyboard shortcut twice to enlarge it. You may or may not experience similar text size results. Like any Tetris game things start out “quietly enough” but this one speeds up quickly, so be prepared! Notice that you do get a warning of what is waiting to drop onto the game board on the left side. Whenever you complete a game you will see this small window asking if you would like to enter a name for the score…you can easily ignore/bypass the window by clicking “Cancel”. Another game and a much better result. Do not be surprised if you feel that little burst of “rushed panic” at the end! Conclusion JC-Tetris is an enjoyable way to relax when you need a break. The ability to pause the game and minimize it for later makes it even better. Have fun! Links Download the JC-Tetris extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: First Person TetrisFriday Fun: Play MineSweeper in Google ChromeFriday Fun: Play 3D Rally Racing in Google ChromeHow to Make Google Chrome Your Default Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Dark Side of the Moon (8-bit) Norwegian Life If Web Browsers Were Modes of Transportation Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports

    Read the article

  • Silverlight Cream for April 01, 2010 -- #827

    - by Dave Campbell
    In this Issue: Max Paulousky, Hassan, Viktor Larsson, Fons Sonnemans, Jim McCurdy, Scott Marlowe, Mike Taulty, Brad Abrams, Jesse Liberty, Scott Barnes, Christopher Bennage, and John Papa and Ward Bell. Shoutouts: Tim Heuer posted a survey: What tools are the minimum to get started in Silverlight?... have you responded yet? Don't want to miss this discussion: Channel 9 Live at MIX10: Bill Buxton & Erik Meijer - Perspectives on Design Bookmark this... Jesse Liberty has moved his site: Silverlight Geek I stand with Tim Heuer on this: Congratulations to latest 2nd quarter Silverlight MVPs From SilverlightCream.com: Wizards. Prototype of sketching Wizard for WPF - 1 Max Paulousky is creating a SketchFlow WPF wizard in Expression Blend... looks like good Expression Blend and SketchFlow no matter what the target is Windows Phone 7 Navigation Hassan has another WP7 Video up, and this one is on Navigation and passing data from page to page. Silverlight 4 PathListBox Viktor Larsson is blogging about the PathListBox, and definitely had a good time doing so.. lots of fun examples. CountDown Clock in Silverlight 4 Fons Sonnemans has reworked his Sivlerlight 3 FlipClock to be this Silverlight 4 CountDown Clock utilizing the Viewbox control to make it scalable. Generic class for deep clone of Silverlight and CLR objects Jim McCurdy has a Silverlight 3 and 4-tested CloneObject class that he's using for creating a deep copy of an object and all it's properties... think drag/drop or undo/redo. Animating the Fill Color of a Silverlight Ellipse Scott Marlowe has a tutorial up that animates a pass/fail indicator with a smooth transition from a red to a green state... all with code. Silverlight 4, Blend 4, MVVM, Binding, DependencyObject Mike Taulty has a great tutorial up on Blend4 and binding... he's got a somewhat contrived example going, but it certainly looks good to me :) Silverlight 4 + RIA Services - Ready for Business: Authentication and Personalization Next up in Brad Abrams' series is Authentication and Personalization. RIA Services makes this easy to do... let Brad show you! An Annotated Line of Business Application Jesse Liberty is walking through the design and delivery of his HyperVideo project with this mini tutorial. Want to understand the thought process behind the LOB app, check this out. How to hack Expression Blend Seems like there was just some discussion about some of this today and here Scott Barnes posts this hack job for Expression Blend... pretty cool actually :) d:DesignInstance in Blend 4 Christopher Bennage has a follow-on post about using d:DesignInstance in Blend 4, and this is a very nice tutorial on the subject Silverlight TV 19: Hidden Gems from MIX10, UFC's Multi-Touch App John Papa and Ward Bell front and center for Silverlight TV number 19... and check out those threads! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Translate report data export from RUEI into HTML for import into OpenOffice Calc Spreadsheets

    - by [email protected]
    A common question of users is, How to import the data from the automated data export of Real User Experience Insight (RUEI) into tools for archiving, dashboarding or combination with other sets of data.XML is well-suited for such a translation via the companion Extensible Stylesheet Language Transformations (XSLT). Basically XSLT utilizes XSL, a template on what to read from your input XML data file and where to place it into the target document. The target document can be anything you like, i.e. XHTML, CSV, or even a OpenOffice Spreadsheet, etc. as long as it is a plain text format.XML 2 OpenOffice.org SpreadsheetFor the XSLT to work as an OpenOffice.org Calc Import Filter:How to add an XML Import Filter to OpenOffice CalcStart OpenOffice.org Calc andselect Tools > XML Filter SettingsNew...Fill in the details as follows:Filter name: RUEI Import filterApplication: OpenOffice.org Calc (.ods)Name of file type: Oracle Real User Experience InsightFile extension: xmlSwitch to the transformation tab and enter/select the following leaving the rest untouchedXSLT for import: ruei_report_data_import_filter.xslPlease see at the end of this blog post for a download of the referenced file.Select RUEI Import filter from list and Test XSLTClick on Browse to selectTransform file: export.php.xmlOpenOffice.org Calc will transform and load the XML file you retrieved from RUEI in a human-readable format.You can now select File > Open... and change the filetype to open your RUEI exports directly in OpenOffice.org Calc, just like any other a native Spreadsheet format.Files of type: Oracle Real User Experience Insight (*.xml)File name: export.php.xml XML 2 XHTMLMost XML-powered browsers provides for inherent XSL Transformation capabilities, you only have to reference the XSLT Stylesheet in the head of your XML file. Then open the file in your favourite Web Browser, Firefox, Opera, Safari or Internet Explorer alike.<?xml version="1.0" encoding="ISO-8859-1"?><!-- inserted line below --> <?xml-stylesheet type="text/xsl" href="ruei_report_data_export_2_xhtml.xsl"?><!-- inserted line above --><report>You can find a patched example export from RUEI plus the above referenced XSL-Stylesheets here: export.php.xml - Example report data export from RUEI ruei_report_data_export_2_xhtml.xsl - RUEI to XHTML XSL Transformation Stylesheetruei_report_data_import_filter.xsl - OpenOffice.org XML import filter for RUEI report export data If you would like to do things like this on the command line you can use either Xalan or xsltproc.The basic command syntax for xsltproc is very simple:xsltproc -o output.file stylesheet.xslt inputfile.xmlYou can use this with the above two stylesheets to translate RUEI Data Exports into XHTML and/or OpenOffice.org Calc ODS-Format. Or you could write your own XSLT to transform into Comma separated Value lists.Please let me know what you think or do with this information in the comments below.Kind regards,Stefan ThiemeReferences used:OpenOffice XML Filter - Create XSLT filters for import and export - http://user.services.openoffice.org/en/forum/viewtopic.php?f=45&t=3490SUN OpenOffice.org XML File Format 1.0 - http://xml.openoffice.org/xml_specification.pdf

    Read the article

  • Ask the Readers: Do You Prefer Computers, Game Consoles, or Other Devices for Your Gaming Needs?

    - by Asian Angel
    Nearly everyone who has access to a computer will play games on it at some point, but many people also use a separate game platform as well. What we would like to know this week is if you prefer using a computer, game consoles, or other devices for your gaming needs. Photo of Faith and Kate Connors from Mirror’s Edge by Tamahikari Tammas. Video games are a perfect way to relax and have fun at home (or at work if you can sneak in some game time!). The increasing variety of devices available with each passing year are making it easier to have access to a gaming platform to suit your needs or “darkest gaming desires”. For many people their computers are the perfect platform…they can play Flash-based games in their browsers, use the default set of games that come with their system, and install any extras that catch their eyes. The added benefit is that when game time is over they can drop right into their browsing, e-mail, personal projects, or work without having to switch hardware. The convenience of the “all-in-one” platform is certainly appealing! Perhaps you prefer to use your computer for other activities outside of gaming and own one or more separate game consoles. You might have chosen an Xbox, Playstation, or Nintendo for example. Maybe a hand-held is preferable for its’ size and portability. Then there are mobile phones and the iPad… With so many options it may feel hard to choose the right platform(s) without a good bit of research regarding display, availability of games for a particular platform, how long before the platform starts to become “obsolete”, etc. What we would like to know this week is which gaming platform you prefer. Is there only one that you choose to use or do you use multiple platforms for gaming? Is there a particular reason such as convenience for your choices? You may even be keeping an older platform around just for a certain game (or games) made for it. Are there any recommendations or advice that you would like to share with your fellow readers? Let us know in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Apture Highlights Turns Your Cursor into a Search Tool Add Classic Sci-Fi Goodness to Your Desktop with the Matrix Theme for Windows 7 You Can’t Walk Straight without Visual Markers [Video] Lord of the Rings Movie Parody Double Feature [Video] Turn a Webpage into an Asteroids-Styled Shooting Game in Opera Dolphin Browser Mini Leaves Beta; Sports New GUI, Easy Bookmarking, and More

    Read the article

  • Built-in card-reader doesn't work. HP Compaq nx6325 notebook

    - by user10940
    I have a HP-Compaq nx6325 notebook with an built-in card-reader (SD, MS/Pro, MMC, SM, XD) and the ubuntu (10.10.) don't see it. I've tried to install it manually, with this steps (and with this tifmxx driver), but doesn't work. The compile log: $ echo /home/tvera/downloads/cr_install /home/tvera/downloads/cr_install $ make -C /lib/modules/2.6.35-25-generic/build M=/home/tvera/downloads/cr_install make[1]: Entering directory `/usr/src/linux-headers-2.6.35-25-generic' CC [M] /home/tvera/downloads/cr_install/tifm_core.o In file included from /home/tvera/downloads/cr_install/tifm_core.c:12: /home/tvera/downloads/cr_install/linux/tifm.h:128: error: field ‘cdev’ has incomplete type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_uevent’: /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 1 of ‘add_uevent_var’ from incompatible pointer type include/linux/kobject.h:244: note: expected ‘struct kobj_uevent_env *’ but argument is of type ‘char **’ /home/tvera/downloads/cr_install/tifm_core.c:69: warning: passing argument 2 of ‘add_uevent_var’ makes pointer from integer without a cast include/linux/kobject.h:244: note: expected ‘const char *’ but argument is of type ‘int’ /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:161: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free’: /home/tvera/downloads/cr_install/tifm_core.c:170: warning: type defaults to ‘int’ in declaration of ‘__mptr’ /home/tvera/downloads/cr_install/tifm_core.c:170: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: At top level: /home/tvera/downloads/cr_install/tifm_core.c:177: error: unknown field ‘release’ specified in initializer /home/tvera/downloads/cr_install/tifm_core.c:178: warning: initialization from incompatible pointer type /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:190: error: implicit declaration of function ‘class_device_initialize’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_add_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:211: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) /home/tvera/downloads/cr_install/tifm_core.c:211: error: (Each undeclared identifier is reported only once /home/tvera/downloads/cr_install/tifm_core.c:211: error: for each function it appears in.) /home/tvera/downloads/cr_install/tifm_core.c:212: error: implicit declaration of function ‘class_device_add’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_remove_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:237: error: implicit declaration of function ‘class_device_del’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_free_adapter’: /home/tvera/downloads/cr_install/tifm_core.c:243: error: implicit declaration of function ‘class_device_put’ /home/tvera/downloads/cr_install/tifm_core.c: In function ‘tifm_alloc_device’: /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘struct device’ has no member named ‘bus_id’ /home/tvera/downloads/cr_install/tifm_core.c:275: error: ‘BUS_ID_SIZE’ undeclared (first use in this function) make[2]: *** [/home/tvera/downloads/cr_install/tifm_core.o] Error 1 make[1]: *** [_module_/home/tvera/downloads/cr_install] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-25-generic' make: *** [all] Error 2 The output of lsusb: Bus 001 Device 005: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter Bus 003 Device 003: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • Control Your Favorite Music Player from Firefox

    - by Asian Angel
    Do you love listening to music while you browse? Now you can access and control your favorite music player directly from Firefox with the FoxyTunes extension. FoxyTunes in Action Once you have installed the extension and restarted Firefox you will see the FoxyTunes Toolbar located in the “Status Bar”. The default media app is Windows Media Player but can be easily changed. Here are the buttons/items available with the default settings: Search, FoxyTunes Main Menu, Show Player, Select Player, Previous Track, Play, Next Track, Mute On/Off, Volume, Play File, Twitty Tunes, Foxy Tunes Search/Explore, Open FoxyTunes Planet, & Toggle Visibility/Drag and drop to move. Note: You can hide or show individual buttons/items using the “FoxyTunes Menus”. Curious about the media players that FoxyTunes works with? Here is a complete listing…that definitely looks terrific! Notice that the currently selected media app is “bold and blue”. For our example we chose Spotify which we have previously covered. Keep in mind that you may or may not need to have your favorite media app open prior to “starting” FoxyTunes up (i.e. Play Button). Here is a good look at the “FoxyTunes Main Menu” and “Controls Sub-Menu”. The “Extras Menu”…if you click on skins you will be taken to the FoxyTunes Skins webpage. Here is a closer look into the “Configurations Menu” and one of the sub-menus. You do not need to look for options in the “Add-ons Manager Window”…everything you need is contained in these menus. If you do not like having FoxyTunes in the “Status Bar” you can easily drag and drop it to another toolbar. You can also condense the appearance of FoxyTunes using the small “triangle buttons” that are located in different spots throughout the “FoxyTunes Toolbar”. With just a click or two you can greatly reduce its’ impact on your UI. Conclusion If you love listening to music while browsing then the FoxyTunes extension will let you take care of everything right from your browser. Links Download the FoxyTunes extension (Mozilla Add-ons) Download the FoxyTunes extension (Extension Homepage) *Note: FoxyTunes add-ins for Internet Explorer and Yahoo! Messenger available here. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add Files5 Awesome Music Desktop Gadgets for Vista and Windows 7Make Windows Media Player Automatically Open in Mini Player ModeSearch for Install Packages from the Ubuntu Command LineInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle ! Find That Elusive Icon with FindIcons

    Read the article

  • System crashes/lockups + compiz/cairo/gnome-panel crashing due to cached ram, please help?

    - by Kristian Thomson
    Can someone help me to troubleshoot system crashes and lockups which result in compiz/cairo dock and gnome-panel crashing? I also get no window borders after the crash and a lot of kernel memory errors. Logs are telling me that apps were killed due to not enough memory, but the system is caching like 14GB of my ram so I'm a bit stuck on what/how to stop it. I'm running Ubuntu 12.10 on a 2011 Mac Mini with 16 GB ram. Here's some of the logs that look like they could be causing trouble. I woke up this morning to find chrome/skype/cairo dock and a few others had been killed and here is what the log said. Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959890] Out of memory: Kill process 12247 (chromium-browse) score 101 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959893] Killed process 12247 (chromium-browse) total-vm:238948kB, anon-rss:17064kB, file-rss:20008kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972283] Out of memory: Kill process 10976 (dropbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972288] Killed process 10976 (dropbox) total-vm:316392kB, anon-rss:115484kB, file-rss:16504kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975890] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975895] Killed process 11515 (tray_icon_worke) total-vm:63336kB, anon-rss:15960kB, file-rss:11436kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281535] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281539] Killed process 10887 (rhythmbox) total-vm:528980kB, anon-rss:92272kB, file-rss:36520kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283110] Out of memory: Kill process 10889 (skype) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283113] Killed process 10889 (skype) total-vm:415056kB, anon-rss:84880kB, file-rss:22160kB I went to look deeper into things and saw that the whole time I'm having these kernel errors with out of memory and something mentioning radeon. I have a Radeon HD 6600M graphics card using the open source driver, not the proprietary one. I was wondering if perhaps using the proprietary one would solve the problem. Also, while writing this in Chrome rhythmbox and chrome just got killed while typing this, due to out of memory errors or so it reports, though I have 7 GB of free RAM at the time with 7 GB cached as well. Here is a full copy of my logs that happened in kern.log simply from when I began typing this question. http://pastebin.com/cdxxDktG Thanks in advance, Kris

    Read the article

  • Share Your Top 30 Visited Domains with Visitation Cloud for Firefox

    - by Asian Angel
    Curious about the domains that you visit most or perhaps you want a way to share that information on a social website? Now you can see and share the 30 most visited domains in your browser’s history with the Visitation Cloud extension. Accessing Visitation Cloud As soon as you install the extension you can get started using it. Depending on how your browser’s UI is set up there are three methods for accessing Visitation Cloud: a “Visitation Cloud Button” inserted at the end of your “Bookmarks Toolbar”, a menu listing in the “Tools Menu”, and a “Toolbar Button” (not shown here). Visitation Cloud in Action As soon as you activate Visitation Cloud a new window will appear with your top domains displayed in a cloud format. Keep in mind that this is more than just a static image…each listing is actually a clickable link. Clicking on any of the listings will open that domain in a new tab or window depending on your particular browser settings. If you feel that you have a great set of links and want to share it with your friends then that is easy to do. Right click anywhere within the Visitation Cloud Window and select “Save as…”. The “cloud image” can be saved in “.png, .jpg, or Scalable Vector Graphics (.svg)” format. For our example we chose the “.svg format”. Perhaps you love the set of links but not the layout…right click and select “Randomize” to change how the cloud looks. Here is our cloud after being “Randomized”. Things definitely got moved around… Accessing the Visitation Cloud Image in other Browsers Once you have your “cloud image” saved you can share it with friends or save it for your own future use in other browsers. Here is our “cloud image” open in Opera Browser with link opening in progress. The same “cloud image” open in Google Chrome. Very nice… Conclusion While this may not be something that everyone will use Visitation Cloud does make for a rather unique, interesting, & fun way to access and share your most visited domains. Links Download the Visitation Cloud extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Fix "Security Error: Domain Name Mismatch" Warning in FirefoxAdd Variety to Your Searches with Search CloudletRestore Your Missing/Deleted Smart Bookmarks Folder in Firefox 3Blocking Spam from International Senders in Windows Vista MailSee Where a Package is Installed on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Share High Res Photos using Divvyshot Draw Online using Harmony How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar

    Read the article

  • Silverlight Cream for May 04, 2010 -- #855

    - by Dave Campbell
    In this Issue: John Papa, Adam Kinney, Mike Taulty, Kirupa, Gunnar Peipman, Mike Snow(-2-, -3-), Jesse Liberty, and Lee. Shoutout: Jeff Wilcox announced Silverlight Unit Test Framework: New version in the April 2010 Silverlight Toolkit From SilverlightCream.com: Silverlight TV 23: MVP Q&A with WWW (Wildermuth, Wahlin and Ward) John Papa has Silverlight 23 up which is a panel discussion between Shawn Wildermuth, Dan Wahlin, Ward Bell and John... wow... what a crew! Design-time Resources in Expression Blend 4 RC Adam Kinney reports on the new feature of Expresseion Blend RC to load resources at design time. Adam also has a project available to demonstrate the concepts he's explaining. Silverlight and WCF RIA Services (1 - Overview) Mike Taulty is starting a series on WCF RIA Services. This first one is an overview and looks to be a good series as expected. Introduction to Sample Data - Page 1 Kirupa has a great 5-part post up about sample data in Expression Blend. Windows Phone 7 development: Using WebBrowser control Gunnar Peipman posted about using the web browser control in WP7 to display RSS data. Good stuff, and all the code too. Silverlight Tip of the Day #10 – Converting Client IP to Geographical Location Mike Snow's Tip #10 is about taking an IP address and getting a geographical location from it. Combine this with his Tip #9 that retrieves the IP address. Silverlight Tip of the Day #11 – Deploying Silverlight Applications with WCF web services. Mike Snow's Tip #11 is much bigger than most ... it's almost an end-to-end solution for creating and deploying a WCF service, including resolving problems. Silverlight Tip of the Day #12 – Getting an Images Source File Name Mike Snow also has tip #12 up, and it's a quick one on getting the original source file name for an image you've loaded. Screen Scraping – When All You Have Is A Hammer… Jesse Liberty posted his solution to a self-imposed problem and ended up writing a 'mini tutorial on using Silverlight for creating desk-top utilities' ... all with source. RIA services and combobox lookups Lee has a post up about RIA Services and setting up comboboxes for lookups. Lots of source in the post and full project download. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Digital Storage for Airline Entertainment

    - by Bill Evjen
    by Thomas Coughlin Common flash memory cards The most common flash memory products currently in use are SD cards and derivative products (e.g. mini and micro-SD cards) Some compact flash used for professional applications (such as DSLR cameras) Evolution of leading flash formats Standardization –> market expansion Market expansion –> volume iNAND –> focus is on enabling embedded X3 iSSD –> ideal for thin form factor devices Flash memory applications Phones are the #1 user of flash memory Flash memory is used as embedded and removable storage in many mobile applications Flash memory is being used in computers as USB sticks and SSDs Possible use of flash memory in computer combined with HDDs (hybrid HDDs and paired or dual storage computers) It can be a removable card or an embedded card These devices can only handle a specific number of writes Flash memory reads considerably quicker than hard drives Hybrid and dual storage in computers SSDs can provide fast performance but they are expensive HDDs can provide cheap storage but they are relatively slow Combining some flash memory with a HDD can provide costs close to those of HDDs and performance close to flash memory Seagate Momentus XT hybrid HDD Various dual storage offerings putting flash memory with HDDs Other common flash memory devices USB sticks All forms and colors Used for moving files around Some sold with content on them (Sony Movies on USB sticks) Solid State Drives (SSDs) Floating Gate Flash Memory Cell When a bit is programmed, electrons are stored upon the floating gate This has the effect of offsetting the charge on the control gate of the transistor If there is no charge upon the floating gate, then the control gate’s charge determines whether or not a current flows through the channel A strong charge on the control gate assumes that no current flows. A weak charge will allow a strong current to flow through. Similar to HDDs, flash memory must provide: Bit error correction Bad block management NAND and NOR memories are treated differently when it comes to managing wear In many NOR-based systems no management is used at all, since the NOR is simply used to store code, and data is stored in other devices. In this case, it would take a near-infinite amount of time for wear to become an issue since the only time the chip would see an erase/write cycle is when the code in the system is being upgraded, which rarely if ever happens over the life of a typical system. NAND is usually found in very different application than is NOR Flash memory wears out This is expected to get worse over time Retention: Disappearing data Bits fade away Retention decreases with increasing read/writes Bits may change when adjacent bits are read Time and traffic are concerns Controllers typically groom read disturb errors Like DRAM refresh Increases erase/write frequency Application characteristics Music – reads high / writes very low Video – r high / writes very low Internet Cache – r high / writes low On airplanes Many consumers now have their own content viewing devices – do they need the airlines? Is there a way to offer more to consumers, especially with their own viewers Additional special content tie into airplane network access to electrical power, internet Should there be fixed embedded or removable storage for on-board airline entertainment? Is there a way to leverage personal and airline viewers and content in new and entertaining ways?

    Read the article

  • How to share two keyboard on the same laptop, french iso layout and usa ansi layout keyboard with usb?

    - by reyman64
    I recently buy a "noppoo choc mini" with this specific ANSI US-INTERNATIONAL pc84 layout. This specific keyboard have only 84 key , a 60% (compact tenkeyless) reduced layout My problem is simple, there is no keyboard layout into Ubuntu 12.04 which correspond to this usa normal ansi layout ... so it's the same problem with reduced version and only 84 key .. I search a template of normal ANSI US-INTERNATIONAL for xmodmap/xkb, and after i can try to manually map the other key. I search on google, and i don't find any other user which have same problem, so it's seem i have not the good keywoard to search this information.. Edit 1 : Here you can see there is probably a bug in ubuntu, because the layout for USA with dead key is not correct ! I have this : http://minus.com/lEdKMrsNAwkVA And other users have this for the same layout : http://i.stack.imgur.com/p52XG.png EDIT 2 It seems after a "sudo dpkg-reconfigure keyboard-configuration" : french standard keyboard pc105 + precision M65 keyboard from dell laptop Now i can see the good us layout in parameters, but i cannot have the iso layout for french usage... EDIT 3 Ok, after reboot i understand the probleme, i explain. I have one laptop with integrated french keyboard, and i want to use my usb keyboard which use a usa ANSI layout. It seem it's impossible in ubuntu and "dpkg-reconfigure keyboard-configuration" to share two different physical layout (ANSI and EU ISO) on the same computer ... EDIT4 Ok, it seems i can switch the physical layout (ISO <- ANSI) with this command in terminal : setxkbmap -layout us setxkbmap -layout us -variant alt-intl an setxkbmap -layout fr It's very complicated qnd it seem ubuntu 12.04 have big problem with keyboard manager ... because all works great with these two commands, without ANY change into the system parameters keyboard !!! Second bug ? The image of the layout for fr is buggy, the layout is not ISO, but i can press on the letter "< " at the left of right shift without any problem ! You can see the image here (french alternative with ANSI layout ? it's crazy ?) : http: //minus.com/lXsDJwoeyWAfF Can you help me on this point ? I'm lost with xkb, and manual mapping is very complicated ... Thanks a lot, SR

    Read the article

  • Is hiring a "chief intern" a good idea?

    - by dukeofgaming
    I'm starting an internship program for our software department and I was wondering about creating a position ("chief intern", intern supervisor, or whatever one should call it) with the following responsibilities: Train interns Coach interns Manage projects and tasks for interns Supervise intern's work in terms of rhythm and quality Act as a liaison between the main team's needs and interns performance/aspirations Evaluate and facilitate intern's progress when they want to grab a higher-level domain-specific task (at this point, a main dev team member can do mentoring) Get freely involved in the main team's software development tasks so that he himself can grow, and have full mentorship from the main dev team. I'm thinking that an apprentice-level engineer (below Jr., or Jr.; but being a graduate and working full-time) can handle this for a while (he will be trained by the main dev team first), until one of two things happen: He/she decides to move on to the main dev team by recommending an appropriate replacement (or me finding another one as a new hire) Keep leading the interns while still being able to grow to Jr. Eng., Eng., Sr. Eng I know the notion of a "chief intern" is common within the medical world, but I don't really know about that in the software world (I was a freelancer for most of my university years). A side-intention to this is also that, if this ends up being a higher rotation position (organically) because the intern supervisor wants to join the main dev team, this could help interns that aspire this position emerge as leaders. My main intention for this, though, is removing distractions from the main team but without making the interns suffer the lack of attention, which could lead to boredom and little intern retention. Is this "chief intern" idea common (or good at least)?, are there any obvious risks to it that I might not be seeing? Edit: I have a draft plan for the kind of work the interns would be doing: Are R&D mini-projects a good activity for interns? Edit #2: My intention is not keeping them isolated, but having someone focus on giving attention to them when we cannot. Edit #3: I'm now convince it is a good idea, but I will take the organic approach to hiring someone in such position: do it myself until I cannot. This way I'll know better what to expect from a person I hire for this role in the future, as well as what works and what doesn't with interns.

    Read the article

  • Speed Up the Help Dialog in Windows and Office

    - by Matthew Guay
    When you click help, you don’t want to wait for your computer to bring it to you.  Here’s how you can speed up the help dialog in Windows and Office. If you have a slow internet connection, chances are you’ve been frustrated by the Help dialog in Windows and Office trying to download fresh content every time you open them. This can be great if the updated help files contain better content, but sometimes you just want to find what you were looking for without waiting.  Here’s how you can turn off the automatic online help. Use Local Help in Windows Windows 7 and Vista’s help dialog usually tries to load the latest content from the net, but this can take a long time on slow connections. If you’re seeing the above screen a lot, you may want to switch to offline help.  Click the “Online Help” button at the bottom, and select “Get offline Help”. Now your computer will just load the pre-installed help files.  And don’t worry; if there’s a major update to your help files, Windows will download and install it through Windows Update.   Stupid Geek Tip: An easy way to open Windows Help is to click on your desktop or Start Menu and press F1 on your keyboard. Use Local Help in Office This same trick works in Office 2007 and 2010.  We’ve actually had more problems with Office’s help being tardy. Solve this the same way as with Windows help.  Click on the “Connected to Office.com” or “Connected to Office Online” button, depending on your version of Office, and select “Show content only from this computer”. This will automatically change the settings for Help in all of your Office applications. While this may not be a major trick, it can be helpful especially if you have a slow internet connection and want to get things done quickly.  Similar Articles Productive Geek Tips How to See the About Dialog and Version Information in Office 2007Speed Up SATA Hard Drives in Windows VistaMake Mouse Navigation Faster in WindowsSpeed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup Page TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

    Read the article

  • Create Custom Playlists in Windows Media Player 12

    - by DigitalGeekery
    A playlist is a group of songs or media files that are grouped together based on a theme. Today we’ll look at how to create your own custom playlists in Windows Media Player 12. Create Custom Playlists Open Windows Media Player and switch to the Library view. Click on the Play tab at the top right to reveal the List pane.   If you currently have songs listed on the List pane, you can remove them by clicking Clear list.   To add songs to your playlist, right-click on the song title, select Add to, and then click Play list. You can also drag and drop the song title right onto the play list area. Hold down the Control [Ctrl] key while clicking to select more than one track at a time.   Changing the Playlist Order You can click and drag each item in your playlist to move it up or down.   You can also right click on the title and select Move up or Move down, or to completely remove a track from your playlist. You have the option to shuffle your list by clicking the Options list icon and selecting Shuffle list from the dropdown list. By selecting Sort list by you can sort by Title, Artist, Album, Release date, and more. Saving and naming your playlist To save your playlist, click on the Save list button. You’ll be prompted to enter a name for your playlist in the text box. Click away when you are finished. Windows Media Player will display your most recent playlists in the Navigation panel. Simply select the playlist anytime you want to listen to it.   Conclusion Custom playlists are a great way to group your music by themes such as mood, genre, activity, season, and more. If you are new to Windows Media Player 12, check out our post on managing your music in Windows Media Player. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Install and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeWhat are wmpnscfg.exe and wmpnetwk.exe and Why Are They Running? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

    Read the article

  • Game timings and formats

    - by topright
    There are more or less standardized TV-show/movie formats and recommended timings: 1. By the early 1960s, television companies commonly presented half-hour long "comedy" series, or one hour long "dramas." Half-hour series were mostly restricted to situation comedy or family comedy, and were usually aired with either a live or artificial laugh track. One hour dramas included genre series such as police and detective series, westerns, science fiction, and, later, serialized prime time soap operas. Programs today still overwhelmingly conform to these half-hour and one hour guidelines. Source 2. In the United States, most medical dramas are one hour long. Source 3. Traditionally serials were broadcast as fifteen minute installments each weekday in daytime slots. In 1956 As the World Turns debuted as the first half-hour soap opera. All soap operas broadcast half-hour episodes by the end of the 1960s. With increased popularity in the 1970s most soap operas expanded to an hour (Another World even expanded to ninety minutes for a short time). More than half of the serials had expanded to one hour episodes by 1980. As of 2010, six of the seven US serials air one hour episodes each weekday. Source Interesting. Are there any standards of timing in game development? Well, 5-20 minutes casual games, of course. There is even a "5-minutes-game" site. And 1-hour-gamer site. Are there 1-week, 1-year, 1-eternity game formats? Chess and Go - deep games that you can study all your life; but they are played in hour or several days (pro games). Addictive long-term online role-playing games (without win-condition) are played in monthes and, possibly, years. Replayability is an important factor to consider. It's good when game design document contains a line: "A game is designed for solving in X hours". How can it be measured before there is any prototype or demo? When you know your game format, you know your audience (and vice versa). It is practical question. Are there psychological researches about dynamic of gaming interest and involvement? And is there a correlation between game format and game genre?

    Read the article

  • Silverlight Cream for November 17, 2011 -- #1168

    - by Dave Campbell
    In this Issue: Colin Eberhardt, Lazar Nikolov, WindowsPhoneGeek, Jesse Liberty, Peter Kuhn, Derik Whittaker, Chris Koenig, and Jeff Blankenburg(-2-). Above the Fold: Silverlight: "Facebook Graph API and Silverlight Part 2 – Publishing data" Lazar Nikolov WP7: "Suppressing Zoom and Scroll interactions in the Windows Phone 7 WebBrowser Control" Colin Eberhardt Metro/WinRT/W8: "Tip/Trick when working with the Application Bar in WinRT/Metro (C#)" Derik Whittaker Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up Pete Brown announced the completion of his book: It’s a wrap! I’ve completed writing Silverlight 5 in Action From SilverlightCream.com: Suppressing Zoom and Scroll interactions in the Windows Phone 7 WebBrowser Control Colin Eberhardt's latest post is all about a helper class he wrote to suppress scrolling and pinch zoom of the WP7 browser control, which you might want to do if the browser is placed inside another control. Facebook Graph API and Silverlight Part 2 – Publishing data In this part 2 of his Facebook and Silverlight series, Lazar Nikolov shows how to post data to your profile or your friends' profiles Localizing a Windows Phone app Step by Step WindowsPhoneGeek's latest post is on Localizing a WP7 app .. another great tutorial with plenty of discussion, pictures, and a project to load up and follow Background Audio Part II: Copying Audio Files To Isolated Storage Continuing his WP7 series, Jesse Liberty has Part 2 of a mini-series on Background Audio up... in this episode he's using local audio and to do so, it must be in ISO Silverlight: Bugs in the multicast client In a Q/A session, Peter Kuhn was presented a nasty bug in the multicast client that he has verified exists in not only Silverlight 4 but also Silverlight 5 Beta, including a link to his entry on Connect. Tip/Trick when working with the Application Bar in WinRT/Metro (C#) Derik Whittaker offers up some good information about the Metro Application Bar and how to keep it where you want it New! Windows Phone Starter Kit for Podcasts Chris Koenig announced the release of a new starter kit for WP7... a starter kit for podcasts. Check out the links on Chris' site and the other two starter kits that are available 31 Days of Mango | Day #4: Compass Jeff Blankenburg continues with Day 4 of his Mango series with this post on the Compass and a cool app to demonstrate it 31 Days of Mango | Day #5: Gyroscope In Day 5, Jeff Blankenburg is talking about and discussing the gyroscope, of course if you have a phone as old as mine, you won't have a gyroscope and it's not on the emulator Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

    - by Kieron
    System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

    Read the article

  • Unrated Easy iOS 6.1.4/6.1.3 Unlock/Jailbreak iPhone 5/4S/4/3GS Untehtered System

    - by user171772
    Popular jailbreak tool Unlock-Jailbreak.net – compiled by the iPhone Team – has just been updated with full support for Unlock/Jailbreak iPhone 5/4S/4/3GS iOS 6.1.4 and 6.1.3/6.0.1 Untethered. You may have caught our tutorial, which detailed how one could jailbreak their device tethered using Redsn0w, although since it was a pre-iOS 6.1.1 release, users needed to "point" the tool to the older firmware. Team Unlock-Jailbreak was established few years ago, combines some of the jailbreak and unlock community’s most talented developers all known for producing reliable jailbreaks in the past. This team was assembled in order to develop a reliable untethered jailbreak and unlock iphone 5,4S,4 iOS 6.1 for post-A5 devices, including the iPhone 5, the iPad mini and the latest-generation iPad. This has now been achieved with the just-released userland jailbreak tool, known as Unlock-Jailbreak.net. To Jailbreak and Unlock your iPhone 5/4/4S/3GS iOS 6.1.4 and 6.1.3 visit the official website http://www.Unlock-Jailbreak.net http://www.Unlock-Jailbreak.net was formed in mid 2008 and have successfully jailbroken over 250,000 iPhones worldwide. This is unparalleled by any other service in the industry. They have achieved this by combining a very simple solution with a fantastic customer service department that is available 24/7 through many forms of contact, including telephone. Unlock-Jailbreak from Unlock-Jailbreak.nethas been downloaded by over 250,000 customers located in over 145 countries. To further ensure customers of its products usability, Unlock-Jailbreak offers a 100% full money back guarantee on all orders. Customers dissatisfied with the company’s product will be given a full refund, no questions asked. One good advantage of the software is that the jailbreaking and unlocking process is coampletely reversible and there will be no evidence that the iPhone has been jailbroken and unlocked . iOS 6.1/6.1.4 and 6.1.3 comes with many new features and updates for multitasking and storage. By unlocking and jailbreaking the iPhone,Unlock/Jailbreak iPhone 5/4S/4/3GS iOS 6.1/6.1.4 and 6.1.3/6.0.1 Untethered unleash unlimited possibilities to improve this already fantastic experience and the iPhone FULL potential. Before going through any jailbreak process with Unlock-Jailbreak it is always good housekeeping to perform a full backup of all information on the device. It is unlikely that anything will go wrong during the process but when undertaking any process that modifies the internals of a file system it is always prudent to err on the side of caution.

    Read the article

  • How do I get wireless working on a Dell Inspiron 510m?

    - by user17449
    Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

    Read the article

  • Fonts look squashed or stretched in the browser on Ubuntu

    - by Arjun Menon
    Fonts in the browser on Ubuntu look look squashed/stretched compared to Windows/OSX. This image shows exactly what I mean: http://i.stack.imgur.com/suUXX.png I installed msttcorefonts and configured both Chrome & FF to use Microsoft fonts (Arial, Times New Roman) instead of the default ones. While MS fonts made web pages appear a bit different, regardless of what font it was the squashed/stretched look remained. FreeSans looks a little different from Arial, but it too is rendered squashed/stretched like Arial on both FF & Chrome. Opera renders the Wikipedia page differently from FF & Chrome, but the fonts looks squashed/stretched on it as well. I used to run Kubuntu prior to switching to Ubuntu and at some point I managed to get the fonts on Chrome (only Chrome) look exactly like in the image on the left. I have no idea how I did it though. Firefox and Rekonq retained the squashed/stretched look. I had been using Rekonq for a while, then switched to FF. While using both browsers I had done various things to get the fonts to look better on them with no success - like installing MS fonts & configuring both browsers to use them. I then, after some time, installed Chrome and the fonts magically looked perfect on them - just like on right-hand side of the image. In fact, the font smoothing looked better (to my eye) compared to Windows and OSX. All 3 OSes use subtly different font smoothing strategies and the differences stand out. Later, I formatted & installed Ubuntu 12.04. The first thing I did was install msttcorefonts & then install Chrome. To my dismay, the fonts on Chrome looked just as squashed/stretched as it did in Firefox. There's no browser (except Wine Internet Explorer) that renders fonts properly on my Ubuntu setup right now. Fixing this is definitely possible, since I was able to do it on Kubuntu, but apparently it requires some mysterious tweaking. Would anyone be willing to help me out?

    Read the article

  • Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

    - by Anega
    Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

    Read the article

  • Ubuntu won't display netbook's native resolution

    - by Daniel
    FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

    Read the article

  • Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

    - by arlendo
    Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >