Search Results

Search found 3024 results on 121 pages for 'sessionstate timeout'.

Page 65/121 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• SSH Kerberos Auth in Mac OSX 10.7

  - by deemstone

  I just upgrade my Mac OS to 10.7 Lion. It has worked well before. But , Only kinit working normally now, can't ssh to my server. After reinstall the "Mac OS X Kerberos Extras" , nothing better. Anyone give me a help? Thanks a lot!! my command line : Myname$ ssh [email protected] -v ...... debug1: Authentications that can continue: gssapi-with-mic,password debug1: Next authentication method: gssapi-with-mic debug1: Miscellaneous failure (see text) UNKNOWN_SERVER while looking up 'host/[email protected]' (cached result, timeout in 1200 sec) debug1: An invalid name was supplied unknown mech-code 0 for mech 1 2 752 43 14 2 debug1: Miscellaneous failure (see text) unknown mech-code 0 for mech 1 3 6 1 5 5 14 debug1: Authentications that can continue: gssapi-with-mic,password debug1: An unsupported mechanism was requested unknown mech-code 0 for mech 1 3 5 1 5 2 7 debug1: Miscellaneous failure (see text) unknown mech-code 0 for mech 1 3 6 1 5 2 5 debug1: Next authentication method: password [email protected]'s password:

  Read the article

• Development Server Blocked Only from Home

  - by theonlylos

  Recently I've been having an issue with my CentOS 6 test server running Apache and Webmin running on port 10000 where when I try accessing any part of the server - SSH/FTP and even my domains (I have two - both keep getting timeout errors) when I try accessing from any computer on my home network. However when I access via tethering or via my office networks everything loads fine. While the firewall is the first issue at mind, my router never was set to block any special ports, and even after adding port 10000 as a specific exception I'm having no luck. Also, I doubt this is an IP blacklisting issue because I have websites on other servers using CloudFlare for security and I haven't gotten any warnings. Any assistance is greatly apprecaiated. UPDATE: Just some extra details about the issue: My ISP to my knowledge only blocks off ports 25 and 80 for residential users to prevent them from running web servers - however this issue has only come up a day or two ago, before that I was using the server successfully for months. Also the server is not physically located in any of my workspaces - it's a VPS housed in a datacenter

  Read the article

• zabbix 2.2.1 no graphs in Web scenario

  - by Mick

  Hello for some time I have a problem with graphs in web scenarios on Zabbix 2.2.1, I put below the screen, this problem has appeared at every graph of web scenario This same scenario installed a second zabbixie that runs on my local virtual machine with zabbix. In my local machine all components of zabbix (server, frontend, agents), but in my production zabbix only zabbix frontend are separated from each other. Scenario for openerp ============================== Name: OpenERP Web Checks Application: New application: Authentication: Update interval (in sec): 60 Retries: 1 Agent: Internet Explorer 10.0 Steps: ============================== Name: OpenERP login page URL: http://openerp.test.com Post: Variables: Timeout: 15 Required string: Required status codes: 200 My zabbix server performance: Anybody have some idea how fix it ? Regards Mick

  Read the article

• suddenly cannot mount nfs share from Windows 7

  - by bing

  I recently reinstalled my file server (moved from fedora to Ubuntu server). Now I cannot mount my nfs share from Windows 7, mounting from Mac OSX works fine. In Windows I either keep getting "the semaphore timeout period has expired" or "an unexpected error has occured". Does Ubuntu need some special magic to allow Windows 7 to mount an nfs share? This is my exports file /home/Bing/ 192.168.1.*(rw,async,insecure,no_subtree_check) /home/Bing/mnt/EXTRN2 192.168.1.*(rw,async,insecure,no_subtree_check) /home/Bing/mnt/EXTRN3 192.168.1.*(rw,async,insecure,no_subtree_check)

  Read the article

• Apache Sending "Content-Length : 0" , How to Fix ?

  - by ServerZilla

  Hi, I am using Apache server and it is sending Content-Length = 0 value which is preventing file-downloads, see - http://www.youtubedroid.com/download2.php?v=%5F3XcMEKNws0&title=Akhila+%2CMumbai+reloaded%2CSuper+dancer+2&hq=0 , here are my .htaccess content : SetEnv no-gzip dont-vary Here are headers sent by the server : HTTP/1.1 200 OK Date: Tue, 15 Dec 2009 06:12:11 GMT Server: Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 X-Powered-By: PHP/5.2.11 Content-Description: File Transfer Content-Disposition: attachment; filename="Akhila ,Mumbai reloaded,Super dancer 2.mp3" Content-Transfer-Encoding: binary Expires: 0 Cache-Control: must-revalidate, post-check=0, pre-check=0 Pragma: public X-Sendfile: ./tmp/64eb3b185e38af95c15405ffb0606e76.mp3 Content-Length: 0 Keep-Alive: timeout=5, max=95 Connection: Keep-Alive Content-Type: application/octet-stream Pls. tell how to fix this ?

  Read the article

• using python Paramiko for ssh: sudo: no tty present and no askpass program specified

  - by misteryes

  I want to use paramiko to ssh into a bunch a remote nodes and run some command line with root priviledge I have ssh key in my home directory and so i don't need to input password when I ssh into those remote nodes but when running the following script: def connect(hostname): ssh = paramiko.SSHClient() ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy()) ssh.connect(hostname, username='niky', pkey=paramiko.RSAKey.from_private_key(open('id_rsa'), 'passwd'), timeout = 240.0) return ssh def run(hostname): ssh = connect(hostname) (stdin, stdout, stderr) = ssh.exec_command("sudo ls") res = stderr.readlines() print hostname+': '+''.join(str(elem) for elem in res)+'\n' run(remote.nity.com) I got the following error: remote.nity.com: sudo: no tty present and no askpass program specified if I don't add sudo before ls everything works fine what are potential reasons ? thanks!

  Read the article

• Why would you ever set MaxKeepAliveRequests to anything but unlimited?

  - by Jonathon Reinhart

  Apache's KeepAliveTimeout exists to close a keep-alive connection if a new request is not issued within a given period of time. Provided the user does not close his browser/tab, this timeout (usually 5-15 seconds) is what eventually closes most keep-alive connections, and prevents server resources from being wasted by holding on to connections indefinitely. Now the MaxKeepAliveRequests directive puts a limit on the number of HTTP requests that a single TCP connection (left open due to KeepAlive) will serve. Setting this to 0 means an unlimited number of requests are allowed. Why would you ever set this to anything but "unlimited"? Provided a client is still actively making requests, what harm is there in letting them happen on the same keep-alive connection? Once the limit is reached, the requests still come in, just on a new connection. The way I see it, there is no point in ever limiting this. What am I missing?

  Read the article

• udev: waiting for uevents to be processed on my Gentoo

  - by stan31337

  During the startup I see machine executing this thing for about 30 seconds: udev: waiting for uevents to be processed Then I get a quick message which says something like: devfs: timeout (50 seconds) I can't see the whole thing because after that system starts up very fast including Xfce. What logs and configs do I need to provide for further investigation? $uname -a Linux genta 3.6.6-gentoo #1 SMP Sun Nov 11 11:02:23 NOVT 2012 i686 Genuine Intel(R) CPU T2300 @ 1.66GHz GenuineIntel GNU/Linux Thank you! UPD: rc-status genta / # rc-status sysinit Runlevel: sysinit dmesg [ started ] udev [ started ] devfs [ started ] genta / # rc-status boot Runlevel: boot hwclock [ started ] modules [ started ] fsck [ started ] root [ started ] mtab [ started ] localmount [ started ] sysctl [ started ] bootmisc [ started ] hostname [ started ] termencoding [ started ] keymaps [ started ] net.lo [ started ] swap [ started ] urandom [ started ] procfs [ started ]

  Read the article

• GRUB-2 Bootloader fails to load for lack of floppy drive. Ubuntu 10.4 & Windows XP

  - by kammer

  2010.07.21 while trying to install Ubuntu 10.4 Hello all, I've been trying to install Ubuntu 10.04 on my Dell workstation and am unable to get the Grub-2 bootloader to load properly. It seems to be failing for lack of a floppy drive on the system resulting in an error message that reads : error: fd0 cannot get C/H/S values. I've gone through the Grub-2 page at https://help.ubuntu.com/community/Grub2 to no avail and other sources having similar problems have likewise turned up no solutions. I would certainly appreciate any insight, here's the background: A while back I was trying to install a different version of Linux and had the same problems, then had to set the project aside for a bit. I don't think this has anything to do with Linux or Ubuntu per se, but rather Grub. The system is an old (4-5 years) Dell workstation that has one drive (128 GB) set up for Windows XP and a second new drive (500GB) which I installed for Linux. There is a DVD/CD drive and the system contains no floppy drive at all. In one attempt to get this working I tried modifying the BIOS to indicate there was a floppy drive - this created a failure earlier in the chain with the BIOS failing to load properly, not unexpected, just a shot in the dark at that point. At the moment I am considering just running out to buy and install a cheap floppy drive to see if that helps. I'll never use the thing though so I'd rather find a solution that doesn't require me to spend money on useless hardware. In any case, here's the /boot/grub/grub.cfg contents: # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi insmod play play 480 440 1 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=fbebde47-f488-41b0-9480-337802ecb988 ro quiet splash initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=fbebde47-f488-41b0-9480-337802ecb988 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" { insmod ntfs set root='(hd0,1)' search --no-floppy --fs-uuid --set 6ef0d4b4f0d4842d drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### Thoughts anyone? Thanks in advance.

  Read the article

• Varnish Error 503 Service Unavailable

  - by alfish

  On Debian I have Varnish cache in front of apache and get 503 error when I try to get urls which are rarely fetched. I've put 10 min timeout in default.vlc: backend default { .host = "127.0.0.1"; .port = "81"; .connect_timeout = 600s; .first_byte_timeout = 600s; .between_bytes_timeout = 600s; } Also I have in /etc/default/varnish DAEMON_OPTS="-a :80 \ -T localhost:6082 \ -b localhost:81 \ -u varnish -g varnish \ -S /etc/varnish/secret \ -p thread_pools=7 \ -p thread_pool_min=200 \ -p thread_pool_max=5000 \ -p listen_depth=2048 \ -p thread_pool_add_delay=2\ -p lru_interval=1800 \ -h classic,169313 \ -p session_linger=100 \ -p sess_workspace=262144 \ -p connect_timeout=600 \ -p max_restarts=6 \ -s malloc,7G" I appreciate your hints to resove this problem.

  Read the article

• Send files ending in .mp4 in Apache with HTTP 206 Partial Content

  - by Pacha

  I am using Apache as web server and the return code is always HTTP/1.1 200. I want to set some kind of handler or use a mod to return HTTP/1.1 206 when the extension of the file requested is .mp4 so it can do video seeking, my web server is already returning some headers to do seeking, but it doesn't work. Is this possible? The HTTP headers http://*hidden*/media/movies/file/1080/d3191cd83109c593ec908f3a47efa8a2.mp4 GET /media/movies/file/1080/d3191cd83109c593ec908f3a47efa8a2.mp4 HTTP/1.1 Host: *hidden* User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Firefox/31.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate Referer: http://vjs.zencdn.net/4.6/video-js.swf Cookie: csrftoken=zXngwwS1S827g7aAJYbHJS3ajn5BGq9M; sessionid=uj1hlj00c85aoehw0n5fye8waggb7uod Connection: keep-alive HTTP/1.1 200 OK Date: Thu, 21 Aug 2014 15:04:46 GMT Server: Apache/2.2.22 (Debian) X-Mod-H264-Streaming: version=2.2.7 Content-Length: 2148905782 Last-Modified: Wed, 13 Aug 2014 11:36:46 GMT Etag: "8e002a-8015b345-5008133ff23c4;-2146061514" Accept-Ranges: bytes Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: video/mp4

  Read the article

• nginx won't respond to monit

  - by Miko

  Although EngineX is running, monit can't seem to figure it out. Here's my monit log: [PDT Apr 13 02:19:19] error : HTTP error: Server returned status 400 [PDT Apr 13 02:19:19] error : 'nginx' failed protocol test [HTTP] at INET[localhost:80] via TCP [PDT Apr 13 02:19:19] info : 'nginx' trying to restart [PDT Apr 13 02:19:19] info : 'nginx' stop: /etc/init.d/nginx [PDT Apr 13 02:19:20] info : 'nginx' start: /etc/init.d/nginx The monitrc file contains the following configuration: if failed port 80 protocol http and request '/ping.txt' # check for response with timeout 20 seconds then restart I can access the file through lynx http://localhost:80/ping.txt without any problems. Why would monit have trouble requesting the file when nginx is running just fine?

  Read the article

• Failed pinging a LAN card of the server from the client using shared internet connection

  - by bobo

  The server (Windows XP Pro SP3) has two LAN cards (LAN card A and B) and is connected to the internet using ADSL. The ADSL connection is shared to LAN card B using Internet Connection Sharing. The client (Windows XP Pro SP3) has one LAN card, and is connected to LAN card B of the server so that it has access to the internet. The IP address on the LAN cards are defined as follows: Server: LAN card A: 192.168.0.3/24 (manually defined by me) LAN card B: 192.168.0.1/24 (manually defined by Internet Connection Sharing) Client: LAN card: 192.168.0.123/24 (assigned by DHCP) Default gateway: 192.168.0.1 From the server, I can ping 192.168.0.123 successfully. From the client, it can access the internet without any problem. I can also ping 192.168.0.1 successfully but for 192.168.0.3, it failed with the Request Timeout error message. Why did the ping fail, and what should be done to make the ping possible? (all firewalls have been turned off.)

  Read the article

• XP boot timer=> set, but does nothing?

  - by mark

  My PC has XP Pro and the boot.ini file looks like this: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(2)\windows [operating systems] C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons multi(0)disk(0)rdisk(0)partition(2)\windows="eXPee Pro" /noexecute=optin /fastdetect Up until about a week ago it would just time-out and boot normally. I haven't made any hardware changes at all. Now, when the system boots it just sits there and waits for me to hit -enter-. I've searched all over for explanations & possible causes, but found nothing which seems to relate. Anyone here have any idea what may have caused the timer to simply quit working like that ? (BTW, the system clock works just as it ever did and keeps time precisely.) Thanks.

  Read the article

• Nagios and rrd on a old server

  - by Pier

  I have an old server (P4 based) on which nagios (and all the other tools to monitor) is running. In the last few weeks we are seeing a strange behavior. In the /var/spool/pnp4nagios (where temporary files are stored before getting processed by pnp4nagios daemon) we have many files like perfdata.1274949941-PID-18839 and we get an error in npcd.log: [05-27-2010 11:17:46] NPCD: ThreadCounter 0/15 File is perfdata.1274951306-PID-27849 [05-27-2010 11:17:46] NPCD: File 'perfdata.1274951306-PID-27849' is an already in process PNP file. Leaving it untouched. Sometimes some graph are not drawn. The server is pretty loaded (around 5-6 normally) and i suspect that npcd goes in timeout and leave those files behind. What could I do (apart from change the server)? Few infos about the system: centos 5.5 nagios 3.2.1 pnp4nagios 0.6 (from sources) Thanks

  Read the article

• SVN do unnecessary chmod on .svn/tempfiles

  - by ???

  My working dir is on an TrueCrypt NTFS volume, with umask 000. So I can read/write on any files with no problem. But I can't do svn command on it, for example `svn update' shows error: svn: Can't set permissions on '.svn/tempfile.8.tmp': strace svn up gives: ... chmod("sbin/.svn/tempfile.2.tmp", 0770) = -1 EPERM (Operation not permitted) fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 write(3, "( failure ( ( 1 76:Can't set per"..., 172) = 172 fcntl64(3, F_GETFL) = 0x802 (flags O_RDWR|O_NONBLOCK) fcntl64(3, F_SETFL, O_RDWR) = 0 read(3, "( abort-edit ( ) ) ( failure ( ("..., 4096) = 191 gettimeofday({1276661368, 382789}, NULL) = 0 lstat64("sbin", {st_mode=S_IFDIR|0770, st_size=0, ...}) = 0 select(0, NULL, NULL, NULL, {0, 1000}) = 0 (Timeout) write(2, "svn: Can't set permissions on 's"..., 82svn: Can't set permissions on 'sbin/.svn/tempfile.2.tmp': Operation not permitted) = 82 close(3) = 0 So, the error occurred when svn chmod on some tmp files. But this is disallowed in the TrueCrypt volumes, and it's just unnecessary. Can I bypass the chmod lib calls when launch svn on TrueCrypt volumes?

  Read the article

• Powershell and long-running external tools?

  - by leeand00

  I'm trying to compact a MS-Access database using JetComp.exe using a powershell script. Here is the operative lines: # 4. Run JetComp LogWrite("Begin: Running JetComp") .\JETCOMP.EXE -src: $srcDB -dest: $dstDB | Out-Null #Run this command and wait for it to finish... IfErrorExit("Error Compacting Database") LogWrite("End: Running JetComp") The JETCOMP.EXE program seems to complete long before it is actually finished and the $dstDB ends up being smaller than the compact should even make it. Initially ($srcDB) it's about 1.8 GB and by the time the command finishes it's about 300,000 kb (about 0.29 gb) that's a pretty long way off from 1.8 gb which when compacted manually ends up being about 1.6 gb. Is there some sort of timeout I don't know about in powershell scripts? P.S. I know that when running JETCOMP.EXE manually, that the system often detects it as "not responding" even though it's actually getting the job done, and waiting long enough will allow it to complete.

  Read the article

• Slow internet using Arch Linux

  - by GZaidman

  after a week or so of using Arch Linux I cant access the internet - it takes around 5 mins to load google (most of the other websites just give me a timeout), pacman's downloading speed range between 5-2Kbs, and pinging google takes around 9Kms. I'm connected using wireless network (wifi card is Intel Ultimate 6300 and router is Edimax 6524n). Every other Windows machine that's connected to the network (and even the T410 running Windows) is fine, so the problem lies in Linux. So far, i checked the resolv.conf file (my router ip address is listed), and the hosts file (pretty much default), and I disabled the ipv6 module. None of that helped. PS: i'm using NetworkManager (but the problem still occurs when connecting using wicd) running on Gnome3. Thanks in advance for any help you can provide! EDIT: something really strange happens whenever I ping google: i get an unknown host 'google.com', but the bit rate from the card jumps at the exact second I ping google (so far, the bit rate jumped to 54Mb/s from 1Mb/s over the course of 4 pings).

  Read the article

• Add MS-DOS boot option to Windows 2000

  - by Ben Miller

  I've got an old laptop that is running Windows 2000 & Windows 98 in a multi-boot configuration. I need to add MS-DOS to that list of startup options. I've already added a primary partition, formatted it for FAT16 and made it bootable, and installed MS-DOS 6.22. My question is, how do I add my MS-DOS partition to the list of startup options? More information: My single hard drive has three primary partitions: 0: FAT32 Windows 2000 1: FAT32 Windows 98 2: FAT(16) MS-DOS 6.22 Currently, the boot-up screen lists Windows 2000 and Windows 98 as options, with Windows 2000 as the default choice. My boot.ini file currently looks like this: [Boot Loader] Timeout=30 Default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [Operating Systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect C:\="Microsoft Windows 98"

  Read the article

• Invalid BOOT.INI (dual boot XP with 7)

  - by Muxa

  I had Windows XP x64 as my main system, and i also had a second partition with Windows XP x64. Both booted from first partition (C:) I then installed Windows 7 Ultimate on the first partition. I've added NTLDR using BCDRDIT. I've also copied NTLDR, NTDETECT.COM and BOOT.INI onto the drive where XP remained. However then i try to boot into Windows XP x64 i get Invalid BOOT.INI file Booting from c:\windows\ NTDETECT failed I found instructions on how to fix it using a boot disk, however the partitions are on a software RAID. I've tried to boot from a customized XP CD with the drivers, however it does not offer me a Repair option for some reason - just setup. Partitions that i have:'= System Reserved Main (Windows 7) Secondary (Windows XP x64) Here's the contents of my BOOT.INI: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Windows XP Professional x64 Edition" /fastdetect

  Read the article

• GlusterFs - high load 90-107% CPU

  - by Sara

  I try and try and try to performance and fix problem with gluster, i try all. I served on gluster webpages, php files, images etc. I have problem after update from 3.3.0 to 3.3.1. I try 3.4 when i think maybe fix it but still the same problem. I temporarily have 1 brick, but before upgrade will be fine. Config: Volume Name: ... Type: Replicate Volume ID: ... Status: Started Number of Bricks: 0 x 2 = 1 Transport-type: tcp Bricks: Brick1: ...:/... Options Reconfigured: cluster.stripe-block-size: 128KB performance.cache-max-file-size: 100MB performance.flush-behind: on performance.io-thread-count: 16 performance.cache-size: 256MB auth.allow: ... performance.cache-refresh-timeout: 5 performance.write-behind-window-size: 1024MB I use fuse, hmm "Maybe the high load is due to the unavailable brick" i think about it, but i cant find information on how to safely change type of volume. Maybe u know how?

  Read the article

• HP ProLiant Smart Array "lock up" code 0x11

  - by ewwhite

  I've a ProLiant DL580 G7 server that experienced a storage subsystem failure during production. The system appeared available and responded to pings, but all I/O access stalled (the system load must have been 100+). The ASR did not trigger at the specified watchdog timeout. I had to force a reboot from the ILO. During POST, I received the following error: A controller failure event occurred prior to this power-up. (Previous lock up code = 0x11) I haven't pulled the ADU report yet, but I'm curious as to what this error actually means. I was not responsible for the the installation, but can see that the firmware is very old. But if there's anything else I should know about the error, I'd like to know for the post-mortem report. edit - I should add that the server had 95 days of uptime prior to the lock up.

  Read the article

• limit linux background flush (dirty pages)

  - by korkman

  Background flushing in linux happens when either too much written data is pending (adjustable via /proc/sys/vm/dirty_background_ratio) or a timeout for pending writes is reached (/proc/sys/vm/dirty_expire_centisecs). Unless another limit is being hit (/proc/sys/vm/dirty_ratio), more written data may be cached. Further writes will block. In theory, this should create a background process writing out dirty pages without disturbing other processes. In practice, it does disturb any process doing uncached reading or synchronous writing. Badly. This is because the background flush actually writes at 100% device speed and any other device requests at this time will be delayed (because all queues and write-caches on the road are filled). Is there any way to limit the amount of requests per second the flushing process performs, or otherwise effectively prioritize other device I/O?

  Read the article

• Nginx + Haproxy + Thin + Rails - 503 Service Unavailable -

  - by Luca G. Soave

  I don't know how troubleshoot this. I get "503 Service Unavailable" http error for all "nginx upstreams" proxy passing calls to haproxy fast_thin and slow_thin ( server 127.0.0.1:3100 and server 127.0.0.1:3200 ), which loadbalance on 6 Thin servers ( 127.0.0.1:3000 .. 3005 ). Static files like /blog are currently fine. The falldown is: nginx on port 80 - haproxy on 3100 and 3200 - thin on 3000 .. 3005 and then Rails. Here it is /etc/nginx/nginx.conf : user nginx; worker_processes 2; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; include /etc/nginx/conf.d/*.conf; } then /etc/nginx/conf.d/default.conf upstream fast_thin { server 127.0.0.1:3100; } upstream slow_thin { server 127.0.0.1:3200; } server { listen 80; server_name www.gitwatcher.com; rewrite ^/(.*) http://gitwatcher.com/$1 permanent; } server { listen 80; server_name gitwatcher.com; access_log /var/www/gitwatcher/log/access.log; error_log /var/www/gitwatcher/log/error.log; root /var/www/gitwatcher/public; # index index.html; location /about { proxy_pass http://fast_thin; break; } location /trends { proxy_pass http://slow_thin; break; } location /categories { proxy_pass http://slow_thin; break; } location /signout { proxy_pass http://slow_thin; break; } location /auth/github { proxy_pass http://slow_thin; break; } location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if (-f $request_filename/index.html) { rewrite (.*) $1/index.html break; } if (-f $request_filename.html) { rewrite (.*) $1.html break; } if (!-f $request_filename) { proxy_pass http://slow_thin; break; } } } then haproxy config file /etc/haproxy/haproxy.cfg : global log 127.0.0.1 local0 log 127.0.0.1 local1 notice #log loghost local0 info maxconn 4096 #chroot /usr/share/haproxy user haproxy group haproxy daemon #debug #quiet nbproc 1 # number of processing cores defaults log global retries 3 maxconn 2000 contimeout 5000 mode http clitimeout 60000 # maximum inactivity time on the client side srvtimeout 30000 # maximum inactivity time on the server side timeout connect 4000 # maximum time to wait for a connection attempt to a server to succeed option httplog option dontlognull option redispatch option httpclose # disable keepalive (HAProxy does not yet support the HTTP keep-alive mode) option abortonclose # enable early dropping of aborted requests from pending queue option httpchk # enable HTTP protocol to check on servers health option forwardfor # enable insert of X-Forwarded-For headers balance roundrobin # each server is used in turns, according to assigned weight stats enable # enable web-stats at /haproxy?stats stats auth haproxy:pr0xystats # force HTTP Auth to view stats stats refresh 5s # refresh rate of stats page listen rails_proxy 127.0.0.1:3100 # - equal weights on all servers # - maxconn will queue requests at HAProxy if limit is reached # - minconn dynamically scales the connection concurrency (bound my maxconn) depending on size of HAProxy queue # - check health every 20000 microseconds server web1 127.0.0.1:3000 weight 1 minconn 3 maxconn 6 check inter 20000 server web1 127.0.0.1:3001 weight 1 minconn 3 maxconn 6 check inter 20000 server web1 127.0.0.1:3002 weight 1 minconn 3 maxconn 6 check inter 20000 listen slow_proxy 127.0.0.1:3200 # cluster for slow requests, lower the queues, check less frequently server slow1 127.0.0.1:3003 weight 1 minconn 1 maxconn 3 check inter 40000 server slow2 127.0.0.1:3004 weight 1 minconn 1 maxconn 3 check inter 40000 server slow3 127.0.0.1:3005 weight 1 minconn 1 maxconn 3 check inter 40000 and the Thin config file /etc/thin/gitwatcher.yml : --- chdir: /var/www/gitwatcher environment: production address: 0.0.0.0 port: 3000 timeout: 30 log: log/thin.log pid: tmp/pids/thin.pid max_conns: 1024 max_persistent_conns: 100 require: [] wait: 30 servers: 6 daemonize: true if I look into open listen ports, I got the following : root@fullness:/var/www/gitwatcher# lsof | grep TCP | egrep "nginx|haproxy|thin" nginx 834 root 8u IPv4 921 0t0 TCP *:http (LISTEN) nginx 835 nginx 8u IPv4 921 0t0 TCP *:http (LISTEN) nginx 837 nginx 8u IPv4 921 0t0 TCP *:http (LISTEN) haproxy 1908 haproxy 4u IPv4 11699 0t0 TCP localhost:3100 (LISTEN) haproxy 1908 haproxy 6u IPv4 11701 0t0 TCP localhost:3200 (LISTEN) root@fullness:/var/www/gitwatcher# iptables -L get me the following : Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:22222 ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT all -- anywhere anywhere DROP all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Any help ?

  Read the article

• Fedora14 serial console how-to needed

  - by lamba2

  Has anyone ever got a serial console working in fedora 14 ? Is it as simple as adding to grub: serial --unit=0 --speed=38400 terminal --timeout=10 serial console and add to the kernel lines: console=tty0 console=ttyS0,38400 ??? If so, this isn't working for me. I have agetty installed, and im using minicom, although i've heard you can also use "screen /dev/ttyUSB0" on the client side. The /etc/init/serial.conf file suggests it should be working, but nothing. Currently getting no joy from any of this after 2 days. Does anyone know a method that definitely works on fedora 14 ? (no /etc/event.d/ needed or such) edit: Client side im using a null modem cable and usb-serial adaptor.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >