system io packaging - Page 65

How to change usb file system?

- by Nrew

How to change the traditional file system of a usb flashdrive(fat32) into ntfs or other file system?

system is not Starting correctly when Booting windows

This menu allows you to select a hardware profile when Windows is started If your system is not starting correctly, then you may switch to a previous system configuration, important: system configuration changes made since the last successful start up will be discarded. Profile 1 If I choose Profile 1 (the only choice) Windows loads normally. This menu always appears when I turn on the computer. Is there any can solve it?

Read the article

Exchange stops working after changing System Time

- by L.M

I am currently in a situation where the system time of my windows machine differs 6 hours from the actual local time. I tried chaning the system time of my windows machine 6 hours back to match the actual local time. The issue is, when the system time is changed, Exchange stops working as it wont start anymore. When i change the time back Exchange works again. Here is the error that it shows when im trying to open the management console after changing the system time. The Follwing error occured while attempting to connect to the specified server "servername". The attempt to connect to http://servername/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: Access is denied. For more information, see the about_remote_troubleshooting Help topic. Any Solutions to this problem?

Read the article

anoymous access and automatic mounting of a samba share from a windows system to a linux system

- by The Journeyman geek

I have most of my audio files on a system shared by most of the people in my family, and i'd like to be able to get them accessable to a headless linux box i control over smb. The share(s) in question are not on a share that requires authentication (and most examples assume so), and i'd like to have them automatically mounted, and accessable on boot. I'd like to only use command line tools - so anything that has x dependancies is out, and shares should be accessable to any user on the system via a mount point OS shouldn't matter, but the "fileserver" is a windows XP system, and i can access the shares without logging in, and the client is a ubuntu 10.04 lts system with a minimal CLI install.

Read the article

.NET Exception error, what does this error means?

- by gsvirdi

I've tried to develop a simple winform utility which is using xml file as its database. I've used VS 2008 express edition, C#. When this utility tries to write into the xml file then this error is displayed on other computer. I've tried to provide System.Xml.dll & System.Xml.Linq.dll in the same folder on the other computer but no use. What does it means? Any solution? See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.MissingMethodException: Method not found: 'Void System.Xml.XmlReaderSettings.set_MaxCharactersFromEntities(Int64)'. at System.Xml.Linq.XNode.GetXmlReaderSettings(LoadOptions o) at System.Xml.Linq.XDocument.Load(String uri, LoadOptions options) at System.Xml.Linq.XDocument.Load(String uri) at Issues.Form1.button1_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- Issues Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/Documents%20and%20Settings/sumsnl.LTSLFBD/Desktop/Process%20Improvement/Issues%20Register/Issues.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- 4u_pgrmq Assembly Version: 1.0.0.0 Win32 Version: 2.0.50727.832 (QFE.050727-8300) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

Read the article

Producer/consumer system using database (MySql), is this feasible?

- by johnrl

Hi all. I need to use something to coordinate my system with several consumers/producers each running on different machines with different operating systems. I have been researching on using MySql to do this, but it seems ridiculously difficult. My requirements are simple: I want to be able to add or remove consumers/producers at any time and thus they should not depend on each other at all. Naturally a database would separate the two nicely. I have been looking at Q4M message queuing plugin for MySql but it seems complicated to use: I have to recompile it every time I upgrade MySql (can this really be true?) because when I try to install it on Ubuntu 9.10 with MySql 5.1.37 it says "Can't open shared library 'libqueue_engine.so' (errno: 0 API version for STORAGE ENGINE plugin is too different)". There is no precompiled version for MySql 5.1.37 apparently. Also what if I want to run MySql on my windows machine, then I can't rely on this plugin as it only seems to run on Linux and OSX?? I really need some input on how to construct my system best possible.

Read the article

we would like the user to be able to pick a file from native file system and drag & drop it to our a

- by user261740

We have an existing java desktop application which starts, when user click on our application icon (placed on desktop) OR double click on executable(.exe). It opens the frame which allows user to select the file from native file system and uploads it to the server. Now we would like to facilitate user, that he can pick a file from windows explorer and drag it to the "shortcut / Application icon" & drop it on the "shortcut / Application icon" on the desktop. This would start the uploading of that file on the server. we need to capture the action of "drop" and launch on shortcut.. which may be completely not related to java, it can be very generic to any application. We are using JSmooth to build an executable from jar and NSIS for installer purpose. I would like to know.. How we can launch the application if user drops local file onto the system icon ? How we get the absolute path of file name which has been dropped onto the executable ?

Read the article

ASP.NET 4 Hosting :: ValidateRequest=”false” not working in .Net 4.0 (VS.Net 2010)

- by mbridge

When we migrated our project from .NET 3.5 to .NET 4.0, we can get this error: Error: System.Web.HttpRequestValidationException A potentially dangerous Request.Form value was detected from the client (ctl00$CC$txtAnswer=\”… World\r\n\r\nI am doing Testin…\”).”} System.Web.HttpRequestValidationException at System.Web.HttpRequest.ValidateString(String value, String collectionKey, RequestValidationSource requestCollection) at System.Web.HttpRequest.ValidateNameValueCollection(NameValueCollection nvc, RequestValidationSource requestCollection) at System.Web.HttpRequest.get_Form() at System.Web.HttpRequest.get_HasForm() at System.Web.UI.Page.GetCollectionBasedOnMethod(Boolean dontReturnNull) at System.Web.UI.Page.DeterminePostBackMode() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.displaypost_aspx.ProcessRequest(HttpContext context) in c:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\a37c2f81\cfc4c927\App_Web_i2rujncl.9.cs:line 0 at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) What is the Cause? In ASP.NET 4, by default, request validation is enabled for all requests, because it is enabled before the BeginRequest phase of an HTTP request. As a result, request validation applies to requests for all ASP.NET resources, not just .aspx page requests. This includes requests such as Web service calls and custom HTTP handlers. Request validation is also active when custom HTTP modules are reading the contents of an HTTP request. Solution: To revert to the behavior of the ASP.NET 2.0 request validation feature, add the following setting in the Web.config file: <system.web> <httpRuntime requestValidationMode=”2.0? /> </system.web>

Read the article

Access PC Settings Easily from Your Desktop in Windows 8 and 8.1

- by Akemi Iwaya

Accessing your system’s settings in Windows 8 is not exactly the most straight-forward of processes, so if you need to change your settings often, then it can be a bit frustrating. With that in mind, the good folks over at 7 Tutorials have created an awesome shortcut that will take all the hassle out of accessing those settings, and make ‘tweaking’ Windows 8 much easier. After downloading the zip file, extract the exe file and place it in an appropriate folder, then create a shortcut. Once you have the new shortcut set up in the desired location (i.e. desktop or pinned to the taskbar), accessing your system’s settings has never been easier in Windows 8 and 8.1! Special Note: If you are someone who runs files through VirusTotal before using them, be aware that two listings there (Commtouch and Symantec) will flag the file as malware. We had no problems on our system whatsoever and believe the malware flags to be false positives. Download the Desktop Shortcut to PC Settings, for Windows 8 & 8.1 [7 Tutorials]

Read the article

Desktop forgets theme?

- by Marcelo Cantos

I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matte white. This last time (just yesterday), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

Read the article

Designing generic render/graphics component in C++?

- by s73v3r

I'm trying to learn more about Component Entity systems. So I decided to write a Tetris clone. I'm using the "style" of component-entity system where the Entity is just a bag of Components, the Components are just data, a Node is a set of Components needed to accomplish something, and a System is a set of methods that operates on a Node. All of my components inherit from a basic IComponent interface. I'm trying to figure out how to design the Render/Graphics/Drawable Components. Originally, I was going to use SFML, and everything was going to be good. However, as this is an experimental system, I got the idea of being able to change out the render library at will. I thought that since the Rendering would be fairly componentized, this should be doable. However, I'm having problems figuring out how I would design a common Interface for the different types of Render Components. Should I be using C++ Template types? It seems that having the RenderComponent somehow return it's own mesh/sprite/whatever to the RenderSystem would be the simplest, but would be difficult to generalize. However, letting the RenderComponent just hold on to data about what it would render would make it hard to re-use this component for different renderable objects (background, falling piece, field of already fallen blocks, etc). I realize this is fairly over-engineered for a regular Tetris clone, but I'm trying to learn about component entity systems and making interchangeable components. It's just that rendering seems to be the hardest to split out for me.

Read the article

Where is my ram?

- by gsedej

I have 2GB installed on my machine running Ubuntu 12.04. After some time of use, I see much of my RAM used. The RAM does not free enough even though I closed all my programs. I included 2 screenshots. First is "Gnome system monitor" (all process) and second is "htop" (with sudo), both sorted by memory usage. From both you see, that it's not possible that all running apps takes together 1GB of memory. First 7 biggest programs sum 250, but others are much smaller (all can't sum even 100MB). The cache is 300MB (yellow ||| on htop) and is not included in 1GB used. Also 260MB is already on swap. (which actually makes 1,3GB of used memory) If i start Firefox (or Chrome) with many tabs, it has only 1GB available and not potentially 1,5 GB (assume 0,5GB is for system). When I need more ram, swapping happens. So where is my ram? Which program is using it? How can i free it, to be available for e.g. Firefox? Gnome system monitor htop

Read the article

one 16K random read I/O issues 2 scsi I/O (16K and 4K) requests in linux

- by hiroyuki

I noticed weird issue when benchmarking random read I/O for files in linux (2.6.18). The Benchmarking program is my own program and it simply keeps reading 16KB of a file from a random offset. I traced I/O behavior at system call level and scsi level by systemtap and I noticed that one 16KB sysread issues 2 scsi I/Os as following. SYSPREAD random(8472) 3, 0x16fc5200, 16384, 128137183232 SCSI random(8472) 0 1 0 0 start-sector: 226321183 size: 4096 bufflen 4096 FROM_DEVICE 1354354008068009 SCSI random(8472) 0 1 0 0 start-sector: 226323431 size: 16384 bufflen 16384 FROM_DEVICE 1354354008075927 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 21807710208 SCSI random(8472) 0 1 0 0 start-sector: 1889888935 size: 4096 bufflen 4096 FROM_DEVICE 1354354008085128 SCSI random(8472) 0 1 0 0 start-sector: 1889891823 size: 16384 bufflen 16384 FROM_DEVICE 1354354008097161 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 139365318656 SCSI random(8472) 0 1 0 0 start-sector: 254092663 size: 4096 bufflen 4096 FROM_DEVICE 1354354008100633 SCSI random(8472) 0 1 0 0 start-sector: 254094879 size: 16384 bufflen 16384 FROM_DEVICE 1354354008111723 SYSPREAD random(8472) 3, 0x16fc5200, 16384, 60304424960 SCSI random(8472) 0 1 0 0 start-sector: 58119807 size: 4096 bufflen 4096 FROM_DEVICE 1354354008120469 SCSI random(8472) 0 1 0 0 start-sector: 58125415 size: 16384 bufflen 16384 FROM_DEVICE 1354354008126343 As shown above, one 16KB pread issues 2 scsi I/Os. (I traced scsi io dispatching with probe scsi.iodispatching. Please ignore values except for start-sector and size.) One scsi I/O is 16KB I/O as requested from the application and it's OK. The thing is the other 4KB I/O which I don't know why linux issues that I/O. of course, I/O performance is degraded by the weired 4KB I/O and I am having trouble. I also use fio (famous I/O benchmark tool) and noticed the same issue, so it's not from the application. Does anybody know what is going on ? Any comments or advices are appreciated. Thanks

Read the article

How to keep subtree removal (`rm -rf`) from starving other processes for Disk I/O?

- by David Eyk

We have a very large (multi-GB) Nginx cache directory for a busy site, which we occasionally need to clear all at once. I've solved this in the past by moving the cache folder to a new path, making a new cache folder at the old path, and then rm -rfing the old cache folder. Lately, however, when I need to clear the cache on a busy morning, the I/O from rm -rf is starving my server processes of disk access, as both Nginx and the server it fronts for are read-intensive. I can watch the load average climb while the CPUs sit idle and rm -rf takes 98-99% of Disk IO in iotop. I've tried ionice -c 3 when invoking rm, but it seems to have no appreciable effect on the observed behavior. Is there any way to tame rm -rf to share the disk more? Do I need to use a different technique that will take its cues from ionice? Update: The filesystem in question is an AWS EC2 instance store (the primary disk is EBS). The /etc/fstab entry looks like this: /dev/xvdb /mnt auto defaults,nobootwait,comment=cloudconfig 0 2

Read the article

High disk I/O activity in CentOS server

- by triiim

I have about 16 websites in a CentOS dedicated, and I am having some problems on high traffic hours, it seems to be a high disk I/O activity causing a general slowdown. I've installed atop and this is what I see on the bottom (the server has been restarted thats why the values are so low): *** system and process activity since boot *** PID RDDSK WRDSK WCANCL DSK CMD 1/18 2176 1.7G 7.3G 854.4M 39 mysqld 671 1248K 3.0G 0K 13 flush-8:0 566 0K 1.1G 0K 5 jbd2/sda2-8 2401 124.2M 529.1M 22408K 3 crond 2032 2.2G 502.0M 0K 12 nginx 2360 425.8M 115.3M 4188K 2 httpd flush-8:0 and jbd2/sda2-8 are the processes I see with iotop using 99% on the IO column, and they are the processes that write the most on the hdd (after mysql). From what I saw in google this could be caused by some ext4 related bug, the current kernel is: Linux srvr.com 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux I asked the hosting support to update the kernel and they tried but they now say that the server wont boot with the new installed kernel and they had to go back to the previous, they are not helping very much. Does someone has any idea how could I solve the high disk usage caused by flush-8:0 and jbd2/sda2-8 processes?

Read the article

Input/output error reading USB backup drive on CentOS 6.4

- by Kev

I'm suddenly seeing some strange behaviour on our USB backup drive that doesn't make sense to me: (2013-10-21 14:58:23 [root@newdc /]$ cd /mnt/backup/ (2013-10-21 14:59:03 [root@newdc backup]$ ls -la ls: reading directory .: Input/output error total 0 (2013-10-21 14:59:05 [root@newdc backup]$ df -h /mnt/backup Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 843G 28G 97% /mnt/backup How is it possible for the OS to know how much is in use, but I can't ls any of it as root? Or more to the point, what problem does this indicate? /var/log/messages said this: Oct 21 14:57:54 g5 kernel: EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal Oct 21 14:57:54 g5 kernel: EXT4-fs (sda1): Remounting filesystem read-only But...read-only is something different than 'throw an io error'... After unmounting to try fsck on it, I had someone on-site look at it, and the drive was not spun up, and had a slow-flashing light, which I believe means it was in a power-suspend mode. So I had them unplug and replug the USB cable, and now (before remounting) it says: fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 2805106/61046784 files, 181934167/244182016 blocks I then mount it and now ls works and df reports: Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 680G 191G 79% /mnt/backup What would cause it to go into such a state without being asked to? Why all the weird behaviour, and now it appears to not be corrupt?

Read the article

Problems with MembershipUser / System.Web.ApplicationServices when upgrading to .net 4

- by DaveK

I have a large vb.net web project that I am trying to updgrade to .net4/VS2010. During compile I get the following error: 'System.Web.Security.MembershipUser' in assembly 'System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' has been forwarded to assembly 'System.Web.ApplicationServices'. Either a reference to 'System.Web.ApplicationServices' is missing from your project or the type 'System.Web.Security.MembershipUser' is missing from assembly 'System.Web.ApplicationServices'. I researched the issue and the error is accurate. I added a reference to System.Web.ApplicationServices but I am still having problems. The project does not seem to recognize that the reference has been added. Intellisense will not pick it up, I can not use it in an Import statement, etc ... The assembly is listed in the compile section of my web.config: <assemblies> ... <add assembly="System.Web.ApplicationServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> Any ideas?

Read the article

System.Threading.Timer keep reference to it.

- by Daniel Bryars

According to [http://msdn.microsoft.com/en-us/library/system.threading.timer.aspx][1] you need to keep a reference to a System.Threading.Timer to prevent it from being disposed. I've got a method like this: private void Delay(Action action, Int32 ms) { if (ms <= 0) { action(); } System.Threading.Timer timer = new System.Threading.Timer( (o) => action(), null, ms, System.Threading.Timeout.Infinite); } Which I don't think keeps a reference to the timer, I've not seen any problems so far, but that's probably because the delay periods used have been pretty small. Is the code above wrong? And if it is, how to I keep a reference to the Timer? I'm thinking something like this might work: class timerstate { internal volatile System.Threading.Timer Timer; }; private void Delay2(Action action, Int32 ms) { if (ms <= 0) { action(); } timerstate state = new timerstate(); lock (state) { state.Timer = new System.Threading.Timer( (o) => { lock (o) { action(); ((timerstate)o).Timer.Dispose(); } }, state, ms, System.Threading.Timeout.Infinite); } The locking business is so I can get the timer into the timerstate class before the delegate gets invoked. It all looks a little clunky to me. Perhaps I should regard the chance of the timer firing before it's finished constructing and assigned to the property in the timerstace instance as negligible and leave the locking out.

Read the article

SecurityNegotiationException in WCF Service Hosted on IIS

- by Ram

Hi, I have hosted a WCF service on IIS. The configuration file is as follows <?xml version="1.0"?>  <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <appSettings/> <connectionStrings/> <system.web>  <compilation debug="false"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </assemblies> </compilation>  <authentication mode="Windows" />  <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <system.web.extensions> <scripting> <webServices>    </webServices>  </scripting> </system.web.extensions>  <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <add name="ScriptModule" preCondition="integratedMode" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> </system.webServer> <system.serviceModel> <services> <service name="IISTest2.Service1" behaviorConfiguration="IISTest2.Service1Behavior">  <endpoint address="" binding="wsHttpBinding" contract="IISTest2.IService1">  <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="IISTest2.Service1Behavior">  <serviceMetadata httpGetEnabled="true"/>  <serviceDebug includeExceptionDetailInFaults="false"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> The client configuration file is as follows <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IService1" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Message"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" establishSecurityContext="true" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://yyy.zzz.xxx.net/IISTest2/Service1.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IService1" contract="ServTest.IService1" name="WSHttpBinding_IService1"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> </system.serviceModel> </configuration> When I tried to access the service from client application, I got SecurityNegotiationException and details are Secure channel cannot be opened because security negotiation with the remote endpoint has failed. This may be due to absent or incorrectly specified EndpointIdentity in the EndpointAddress used to create the channel. Please verify the EndpointIdentity specified or implied by the EndpointAddress correctly identifies the remote endpoint. If I host the service on ASP .NET Dev server, it work well but if I host on IIS above mentioned error occurs. Thanks, Ram

Read the article

Issues with Server 2012 using DFSR running on Hyper-V 2012

- by Bryan

We have a number of Server 2012 systems, all of which run virtualised on Hyper-V 2012 server. We are having problems with two such virtual instances, both of which are used as file servers, whereby they occasionally stop responding to requests to serve files to clients. After logging on to the server, attempts to shut it down gracefully fail (no error, it just fails to acknowledge a shutdown request). Recovery is a case of power cycling the server(s) from the Hyper-V console. These two servers don't server a large number of users (one serves no more than 6 users, and the other serves around 20 users), they are in the same domain, but on different physical hardware (and at different sites). They don't lock up at the same time. They both use DFSR to replicate a fairly large amount of data between themselves (200GB) over ADSL connections, this is working fine, and we have been using DFSR to do this on the previous two generations of server OS we have used (Server 2008 R2 and Server 2003 - both of which were physical installs however). Today, when one of the servers crashed, I noticed an entry in the event log, which looked similar to the following: Log Name: Application Source: ESENT Date: 27/11/2012 10:25:55 Event ID: 533 Task Category: General Level: Warning Keywords: Classic User: N/A Computer: HAL-FS-01.example.com Description: DFSRs (1500) \\.\E:\System Volume Information\DFSR\database_C8CC_101_CC00_EC0E\ dfsr.db: A request to write to the file "\\.\E:\System Volume Information\ DFSR\database_C8CC_101_CC00_EC0E\fsr.log" at offset 4423680 (0x0000000000438000) for 4096 (0x00001000) bytes has not completed for 36 second(s). This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. When the server started up again, I went to find the event log entry to investigate further and found that the event log entry was no longer there (I assume it was in memory but failed to write to disk before the server was powered off, for the reason mentioned in the message). I found the above message by searching back further in the event log. Both of these virtual servers have their E: volumes fully allocated as opposed to dynamically expanding, and there are no other issues on any of the other virtual servers (which include server 2012, server 2008 R2 and Ubuntu 12.04 x64). There are no signs of IO, memory or CPU starvation on the host systems. I've used performance counters on the affected virtual servers to monitor memory usage (including non paged pool usage), as well as CPU and network utilisation, and none of these show any signs of trouble when the issue arises. I would have thought our configuration isn't that uncommon, so I'm wondering if anyone else has seen this, and managed to resolve the problem?

Read the article

Quantifying the effects of partition mis-alignment

- by Matt

I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

Read the article

High I/O latency with software RAID, LUKS encrypted and LVM partitioned KVM setup

- by aef

I found out a performance problems with a Mumble server, which I described in a previous question are caused by an I/O latency problem of unknown origin. As I have no idea what is causing this and how to further debug it, I'm asking for your ideas on the topic. I'm running a Hetzner EX4S root server as KVM hypervisor. The server is running Debian Wheezy Beta 4 and KVM virtualisation is utilized through LibVirt. The server has two different 3TB hard drives as one of the hard drives was replaced after S.M.A.R.T. errors were reported. The first hard disk is a Seagate Barracuda XT ST33000651AS (512 bytes logical, 4096 bytes physical sector size), the other one a Seagate Barracuda 7200.14 (AF) ST3000DM001-9YN166 (512 bytes logical and physical sector size). There are two Linux software RAID1 devices. One for the unencrypted boot partition and one as container for the encrypted rest, using both hard drives. Inside the latter RAID device lies an AES encrypted LUKS container. Inside the LUKS container there is a LVM physical volume. The hypervisor's VFS is split on three logical volumes on the described LVM physical volume: one for /, one for /home and one for swap. Here is a diagram of the block device configuration stack: sda (Physical HDD) - md0 (RAID1) - md1 (RAID1) sdb (Physical HDD) - md0 (RAID1) - md1 (RAID1) md0 (Boot RAID) - ext4 (/boot) md1 (Data RAID) - LUKS container - LVM Physical volume - LVM volume hypervisor-root - LVM volume hypervisor-home - LVM volume hypervisor-swap - … (Virtual machine volumes) The guest systems (virtual machines) are mostly running Debian Wheezy Beta 4 too. We have one additional Ubuntu Precise instance. They get their block devices from the LVM physical volume, too. The volumes are accessed through Virtio drivers in native writethrough mode. The IO scheduler (elevator) on both the hypervisor and the guest system is set to deadline instead of the default cfs as that happened to be the most performant setup according to our bonnie++ test series. The I/O latency problem is experienced not only inside the guest systems but is also affecting services running on the hypervisor system itself. The setup seems complex, but I'm sure that not the basic structure causes the latency problems, as my previous server ran four years with almost the same basic setup, without any of the performance problems. On the old setup the following things were different: Debian Lenny was the OS for both hypervisor and almost all guests Xen software virtualisation (therefore no Virtio, also) no LibVirt management Different hard drives, each 1.5TB in size (one of them was a Seagate Barracuda 7200.11 ST31500341AS, the other one I can't tell anymore) We had no IPv6 connectivity Neither in the hypervisor nor in guests we had noticable I/O latency problems According the the datasheets, the current hard drives and the one of the old machine have an average latency of 4.12ms.

Read the article

Winforms - what's a cool taskbar/system tray notifier approach?

- by Greg

Hi What's a cool taskbar/system tray notifier approach? To get that latest cool looking sliding windows type notifications can I stay WinForms, or do I need to go WFP? Which control/class/framework should I look at? Basically after a more fresher:modern looking UI than the old winforms popular bubbles etc

Read the article

Is there anyway for a win2k8 scheduled task to have normal priority IO?

- by Jason Mathison

I have a scheduled task that is very IO intensive (deleting hundreds of thousands of files). For disk space reasons, this job has to be performed reasonably quickly. On win2k8, scheduled tasks always have a low IO priority. Raising the priority of the process did not change the IO priority. Is there any way to get a scheduled task to have a normal IO priority?

Read the article

How can I extract the original image stream from a System.Drawing.Bitmap object?

- by skolima

I am embedding images into my assembly using .resx files. Upon runtime, I need to save the images into standalone files, restoring the original content. How can I extract the original file stream from an System.Drawing.Bitmap instance? I know I can create a stream using Bitmap.Save(), but this transcodes (and in effect - inflates) the images, even when saving a PNG back as PNG. Or perhaps my mistake is reading them from Resource as Bitmap in the first place?

Search Results

Search found 48074 results on 1923 pages for 'system io packaging'.

Page 65/1923 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72 | Next Page >

- by Nrew

- by sharza

- by L.M

- by The Journeyman geek

- by gsvirdi

- by johnrl

- by user261740

- by mbridge

- by Akemi Iwaya

- by Marcelo Cantos

- by s73v3r

- by gsedej

- by hiroyuki

- by David Eyk

- by triiim

- by Kev

- by DaveK

- by Daniel Bryars

- by Ram

- by Bryan

- by Matt

- by aef

- by Greg

- by Jason Mathison

- by skolima

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72 | Next Page >