using - Page 65 - Developer IT

Using Solaris zfs + iscsi targets with Oracle VM

- by wim.coekaerts

I was playing with my Oracle VM setup and needed some shared storage that was block based. I did not have a storage array available but I did have a solaris box, that I use for Oracle VDI, available. I set up a few iscsi targets on this solaris server and exported them to my 2 Oracle VM servers. Here's how I did this : (1) On the solaris side : # zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT rpool 544G 129G 415G 23% ONLINE - I just have a simple zpool, called rpool, on this box. It has plenty of space available for my needs. So I will use rpool and I will create 5 50gb vols : zfs create -V 50G rpool/ovm1 zfs create -V 50G rpool/ovm2 zfs create -V 50G rpool/ovm3 zfs create -V 50G rpool/ovm4 zfs create -V 50G rpool/ovm5 I want to use these volumes for iscsi so I have to enable them as shared iscsi devices : zfs set shareiscsi=on rpool/ovm1 zfs set shareiscsi=on rpool/ovm2 zfs set shareiscsi=on rpool/ovm3 zfs set shareiscsi=on rpool/ovm4 zfs set shareiscsi=on rpool/ovm5 The command iscsitadm list target should list these devices so make sure they show up. # iscsitadm list target Target: rpool/ovm1 iSCSI Name: iqn.1986-03.com.sun:02:896c766c-0943-4da5-d47e-9575b5a0be36 Connections: 2 Target: rpool/ovm2 iSCSI Name: iqn.1986-03.com.sun:02:a3116b46-73e0-e8c2-e80c-9a4f71aff069 Connections: 2 Target: rpool/ovm3 iSCSI Name: iqn.1986-03.com.sun:02:a838c400-2730-c0d6-f2c2-ee186a0261c1 Connections: 2 Target: rpool/ovm4 iSCSI Name: iqn.1986-03.com.sun:02:2e046afb-d66d-4f3f-c5de-8115e0ddd931 Connections: 2 Target: rpool/ovm5 iSCSI Name: iqn.1986-03.com.sun:02:66109fbe-81ac-ef05-f85e-ab8c1f34cb43 Connections: 2 At this point I want to make sure that I have some access control on these devices. To make it easier, I will create an alias for my 2 servers and use the alias for the ACL. get the iqn from the 2 servers on my 2 ovm servers (wcoekaer-srv1, wcoekaer-srv2) get the content of /etc/iscsi/initiatorname.iscsi (for each server) InitiatorName=iqn.1986-03.com.sun:01:2a7526f0ffff On the solaris side create the aliases : iscsitadm create initiator -n iqn.1986-03.com.sun:01:2a7526f0ffff wcoekaer-srv1 iscsitadm create initiator -n iqn.1986-03.com.sun:01:e31b08110f1 wcoekaer-srv5 Add the ACL to the targets : iscsitadm modify target -l wcoekaer-srv1 rpool/ovm1 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm2 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm3 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm4 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm5 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm1 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm2 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm3 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm4 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm5 (2) the Oracle VM side On each server just do 2 simple things : # iscsiadm -m discovery -t sendtargets -p ca-vdi1 where ca-vdi1 is my solaris server name # service iscsi restart When I do cat /proc/partitions on my servers I will see the devices show up # cat /proc/partitions major minor #blocks name 8 0 160836480 sda 8 1 104391 sda1 8 2 3148740 sda2 8 3 1052257 sda3 253 0 6377804 dm-0 253 1 6377804 dm-1 253 2 6377804 dm-2 8 16 52428800 sdb 8 32 52428800 sdc 8 48 52428800 sdd 8 80 52428800 sdf 8 64 52428800 sde These 5 new devices sd[b..f] are shared storage for Oracle VM and can be used to pass through to the VM's as phy: devices or put ocfs2 on it and use as shared filesystem storage for dom0 repositories. I am setting up an 11gR2 rac template (the cool stuff Saar did) so I am using my devices to create a 2 node RAC cluster with phy: devices.

Read the article

Using Resources the Right Way

- by BuckWoody

It’s an interesting time in computing technology. At one point there was a dearth of information available for solving a given problem, or educating ourselves on broader topics so that we can solve problems in the future. With dozens, perhaps hundreds or thousands of web sites and content available (for free, in many cases) from vendors, peers, even colleges and universities, it seems like there is actually too much information. Who has the time to absorb all this information and training? Even if you had the inclination, where to start? In fact, it seems so overwhelming that I often hear people saying that they can’t find the training they need, or that vendor X or Y “doesn’t help their users”. On questioning these folks, however, I often find that they – and sometimes I - haven’t put in the effort to learn what resources we have. That’s where blogs, like this one, can help. If you follow a blog, either by checking it often or perhaps subscribing to the Really Simple Syndication (RSS) feed, you’ll be able to spread out the search or create a mental filter for the information you need. But it’s not enough just read a blog or a web page. The creators need real feedback – what doesn’t work, and what does. Yes, you’re allowed to tell a vendor or writer “This helped me because…” so that you reinforce the positives. To be sure, bring up what doesn’t work as well – that’s fine. But be specific, and be constructive. You’d be surprised at how much it matters. I know for a fact at Microsoft we listen – there is a real live person that reads your comments. I’m sure this is true of other vendors, and I also know that most blog authors – yours truly most especially – wants to know what you think. In this blog entry I’d to call your attention to three resources you have at your disposal, and how you can use them to help. I’ll try to bring up things like this from time to time that I find useful, and cover in them in more depth like this. Think of this as a synopsis of a longer set of resources that you can use to filter whether you want to research further, bookmark, or forward on to a circle of friends where you think it might help them. Data Driven Design Concepts http://msdn.microsoft.com/en-us/library/windowsazure/jj156154 I’ll start with a great site that walks you through the process of designing a solution from a data-first perspective. As you know, I believe all computing is merely re-arranging data. If you follow that logic as well, you’ll realize that whenever you create a solution, you should start at the data-end of the application. This resource helps you do that. Even if you don’t use the specific technologies the instructions use, the concepts hold for almost any other technology that deals with data. This should be a definite bookmark for a developer, DBA, or Data Architect. When I mentioned my admiration for this resource here at Microsoft, the team that created it contacted me and asked if I’d share an e-mail address to my readers so that you can comment on it. You’re guaranteed to be heard – you can suggest changes, talk about how useful – or not – it is, and so on. Here’s that address: [email protected] End-to-End Example of a complete Hybrid Application – with Live Demo https://azurestocktrader.cloudapp.net/Default.aspx I learn by example. I also like having ready-made, live, functional demos that show the completed solution at work. If you’ve ever wanted to learn how a complex, complete, hybrid application that bridges on-premises systems with cloud-based databases, code, functions and more, this is it. It’s a stock-trading simulator, and you can get everything from the design to the code itself, or you can just play with the application. It’s running on Windows Azure, the actual production servers we use for everything else. Using a Cloud-Based Service https://azureconfigweb.cloudapp.net/Default.aspx Along with that stock-trading application, you have a full demonstration and usable code sample of a web-based service available. If you’re a developer, this is a style of code you need to understand for everything from iPhone development to a full Service-Oriented Architecture (SOA) environment. So check out these resources. I’ll post more from time to time as I run across them. Hopefully they’ll be as useful to you as they are to me. Oh, and if you have a comment on any of the resources, let them know. And if you have any comments about these or any of my entries, feel free to post away. To quote a famous TV Show: “Hello Seattle – I’m listening…”

Read the article

How do I rotate my monitor using xorg?

- by user1106405

I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

Read the article

Using Definition of Done to Drive Agile Maturity

- by Dylan Smith

I’ve been an Agile Coach at a lot of different clients over the years, and I want to share an approach I use to help them adopt and mature over time. It’s important to realize that “Agile” is not a black/white yes/no thing. Teams can be varying degrees of agile. I think of this as their agile maturity level. When I coach teams I want them to start out being a little agile, and get more agile as they mature. The approach I teach them is to use the definition of done as a technique to continuously improve their agile maturity over time. We’re probably all familiar with the concept of “Done Done” that represents what *actually* being done a feature means. Not just when a developer says he’s done right after he writes that last line of code that makes the feature kind-of work. Done Done means the coding is done, it’s been tested, installers and deployment packages have been created, user manuals have been updated, architecture docs have been updated, etc. To enable teams to internalize the concept of “Done Done”, they usually get together and come up with their Definition of Done (DoD) that defines all the activities that need to be completed before a feature is considered Done Done. The Done Done technique typically is applied only to features (aka User Stories). What I do is extend this to apply to several concepts such as User Stories, Sprints, Releases (and sometimes Check-Ins). During project kick-off I’ll usually sit down with the team and go through an exercise of creating DoD’s for each of these concepts (Stories/Sprints/Releases). We’ll usually start by just brainstorming a bunch of activities that could end up in these various DoD’s. Here’s some examples: Code Reviews StyleCop FxCop User Manuals Updated Architecture Docs Updated Tested by QA Tested by UAT Installers Created Support Knowledge Base Updated Deployment Instructions (for Ops) written Automated Unit Tests Run Automated Integration Tests Run Then we start by arranging these activities into the place they occur today (e.g. Do you do UAT testing only once per release? every sprint? every feature?). If the team was previously Waterfall most of these activities probably end up in the Release DoD. An extremely mature agile team would probably have most of these activities in the DoD for the User Stories (because an extremely mature agile team will probably do continuous deployment and release every story). So what we need to do as a team, is work to move these activities from their current home (Release DoD) down into the Sprint DoD and eventually into the User Story DoD (and maybe into the lower-level Check-In DoD if we decide to use that). We don’t have to move them all down to User Story immediately, but as a team we figure out what we think we’re capable of moving down to the Sprint cycle, and Story cycle immediately, and that becomes our starting DoD’s. Over time the team makes an effort to continue moving activities down from Release->Sprint->Story as they become more agile and more mature. I try to encourage them to envision a world in which they deploy to production as each User Story is completed. They would need to be updating User Manuals, creating installers, doing UAT testing (typical Release cycle activities) on every single User Story. They may never actually reach that point, but they should envision that, and strive to keep driving the activities down closer to the User Story cycle s they mature. This is a great technique to give a team an easy-to-follow roadmap to mature their agile practices over time. Sure there’s other aspects to maturity outside of this, but it’s a great technique, that’s easy to visualize, to drive agility into the team. Just keep moving those activities (aka “gates”) down the board from Release->Sprint->Story. I’ll try to give an example of what a recent client of mine had for their DoD’s (this is from memory, so probably not 100% accurate): Release Create/Update deployment Instructions For Ops Instructional Videos Updated Run manual regression test suite UAT Testing In this case that meant deploying to an environment shared across the enterprise that mirrored production and asking other business groups to test their own apps to ensure we didn’t break anything outside our system Sprint Deploy to UAT Environment But not necessarily actually request UAT testing occur User Guides updated Sprint Features Video Created In this case we decided to create a video each sprint showing off the progress (video version of Sprint Demo) User Story Manual Test scripts developed and run Tested by BA Deployed in shared QA environment Using automated deployment process Peer Code Review Code Check-In Compiled (warning-free) Passes StyleCop Passes FxCop Create installer packages Run Automated Tests Run Automated Integration Tests PS – One of my clients had a great question when we went through this activity. They said that if a Sprint is by definition done when the end-date rolls around (time-boxed), isn’t a DoD on a sprint meaningless – it’s done on the end-date regardless of whether those other activities are complete or not? My answer is that while that statement is true – the sprint is done regardless when the end date rolls around – if the DoD activities haven’t been completed I would consider the Sprint a failure (similar to not completing what was committed/planned – failure may be too strong a word but you get the idea). In the Retrospective that will become an agenda item to discuss and understand why we weren’t able to complete the activities we agreed would need to be completed each Sprint.

Read the article

Pro/con of using Angular directives for complex form validation/ GUI manipulation

- by tengen

I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

Read the article

Welcome to BlogEngine.NET 2.9 using Microsoft SQL Server

If you see this post it means that BlogEngine.NET 2.9 is running and the hard part of creating your own blog is done. There is only a few things left to do. Write Permissions To be able to log in to the blog and writing posts, you need to enable write permissions on the App_Data folder. If you’re blog is hosted at a hosting provider, you can either log into your account’s admin page or call the support. You need write permissions on the App_Data folder because all posts, comments, and blog attachments are saved as XML files and placed in the App_Data folder. If you wish to use a database to to store your blog data, we still encourage you to enable this write access for an images you may wish to store for your blog posts. If you are interested in using Microsoft SQL Server, MySQL, SQL CE, or other databases, please see the BlogEngine wiki to get started. Security When you've got write permissions to the App_Data folder, you need to change the username and password. Find the sign-in link located either at the bottom or top of the page depending on your current theme and click it. Now enter "admin" in both the username and password fields and click the button. You will now see an admin menu appear. It has a link to the "Users" admin page. From there you can change the username and password. Passwords are hashed by default so if you lose your password, please see the BlogEngine wiki for information on recovery. Configuration and Profile Now that you have your blog secured, take a look through the settings and give your new blog a title. BlogEngine.NET 2.9 is set up to take full advantage of of many semantic formats and technologies such as FOAF, SIOC and APML. It means that the content stored in your BlogEngine.NET installation will be fully portable and auto-discoverable. Be sure to fill in your author profile to take better advantage of this. Themes, Widgets & Extensions One last thing to consider is customizing the look of your blog. We have a few themes available right out of the box including two fully setup to use our new widget framework. The widget framework allows drop and drag placement on your side bar as well as editing and configuration right in the widget while you are logged in. Extensions allow you to extend and customize the behaivor of your blog. Be sure to check the BlogEngine.NET Gallery at dnbegallery.org as the go-to location for downloading widgets, themes and extensions. On the web You can find BlogEngine.NET on the official website. Here you'll find tutorials, documentation, tips and tricks and much more. The ongoing development of BlogEngine.NET can be followed at CodePlex where the daily builds will be published for anyone to download. Again, new themes, widgets and extensions can be downloaded at the BlogEngine.NET gallery. Good luck and happy writing. The BlogEngine.NET team

Read the article

Using Private Extension Galleries in Visual Studio 2012

- by Jakob Ehn

Note: The installer and the complete source code is available over at CodePlex at the following location: http://inmetavsgallery.codeplex.com Extensions and addins are everywhere in the Visual Studio ALM ecosystem! Microsoft releases new cool features in the form of extensions and the list of 3rd party extensions that plug into Visual Studio just keeps growing. One of the nice things about the VSIX extensions is how they are deployed. Microsoft hosts a public Visual Studio Gallery where you can upload extensions and make them available to the rest of the community. Visual Studio checks for updates to the installed extensions when you start Visual Studio, and installing/updating the extensions is fast since it is only a matter of extracting the files within the VSIX package to the local extension folder. But for custom, enterprise-specific extensions, you don’t want to publish them online to the whole world, but you still want an easy way to distribute them to your developers and partners. This is where Private Extension Galleries come into play. In Visual Studio 2012, it is now possible to add custom extensions galleries that can point to any URL, as long as that URL returns the expected content of course (see below).Registering a new gallery in Visual Studio is easy, but there is very little documentation on how to actually host the gallery. Visual Studio galleries uses Atom Feed XML as the protocol for delivering new and updated versions of the extensions. This MSDN page describes how to create a static XML file that returns the information about your extensions. This approach works, but require manual updates of that file every time you want to deploy an update of the extension. Wouldn’t it be nice with a web service that takes care of this for you, that just lets you drop a new version of your VSIX file and have it automatically detect the new version and produce the correct Atom Feed XML? Well search no more, this is exactly what the Inmeta Visual Studio Gallery Service does for you :-) Here you can see that in addition to the standard Online galleries there is an Inmeta Gallery that contains two extensions (our WIX templates and our custom TFS Checkin Policies). These can be installed/updated i the same way as extensions from the public Visual Studio Gallery. Installing the Service Download the installler (Inmeta.VSGalleryService.Install.msi) for the service and run it. The installation is straight forward, just select web site, application pool and (optional) a virtual directory where you want to install the service. Note: If you want to run it in the web site root, just leave the application name blank Press Next and finish the installer. Open web.config in a text editor and locate the the <applicationSettings> element Edit the following setting values: FeedTitle This is the name that is shown if you browse to the service using a browser. Not used by Visual Studio BaseURI When Visual Studio downloads the extension, it will be given this URI + the name of the extension that you selected. This value should be on the following format: http://SERVER/[VDIR]/gallery/extension/ VSIXAbsolutePath This is the path where you will deploy your extensions. This can be a local folder or a remote share. You just need to make sure that the application pool identity account has read permissions in this folder Save web.config to finish the installation Open a browser and enter the URL to the service. It should show an empty Feed page: Adding the Private Gallery in Visual Studio 2012 Now you need to add the gallery in Visual Studio. This is very easy and is done as follows: Go to Tools –> Options and select Environment –> Extensions and Updates Press Add to add a new gallery Enter a descriptive name, and add the URL that points to the web site/virtual directory where you installed the service in the previous step Press OK to save the settings. Deploying an Extension This one is easy: Just drop the file in the designated folder! :-) If it is a new version of an existing extension, the developers will be notified in the same way as for extensions from the public Visual Studio gallery: I hope that you will find this sever useful, please contact me if you have questions or suggestions for improvements!

Read the article

Retrieving recent tweets using LINQ

- by brian_ritchie

There are a few different APIs for accessing Twitter from .NET. In this example, I'll use linq2twitter. Other APIs can be found on Twitter's development site. First off, we'll use the LINQ provider to pull in the recent tweets. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public static Status[] GetLatestTweets(string screenName, int numTweets) 2: { 3: try 4: { 5: var twitterCtx = new LinqToTwitter.TwitterContext(); 6: var list = from tweet in twitterCtx.Status 7: where tweet.Type == StatusType.User && 8: tweet.ScreenName == screenName 9: orderby tweet.CreatedAt descending 10: select tweet; 11: // using Take() on array because it was failing against the provider 12: var recentTweets = list.ToArray().Take(numTweets).ToArray(); 13: return recentTweets; 14: } 15: catch 16: { 17: return new Status[0]; 18: } 19: } Once they have been retrieved, they would be placed inside an MVC model. Next, the tweets need to be formatted for display. I've defined an extension method to aid with date formatting: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public static class DateTimeExtension 2: { 3: public static string ToAgo(this DateTime date2) 4: { 5: DateTime date1 = DateTime.Now; 6: if (DateTime.Compare(date1, date2) >= 0) 7: { 8: TimeSpan ts = date1.Subtract(date2); 9: if (ts.TotalDays >= 1) 10: return string.Format("{0} days", (int)ts.TotalDays); 11: else if (ts.Hours > 2) 12: return string.Format("{0} hours", ts.Hours); 13: else if (ts.Hours > 0) 14: return string.Format("{0} hours, {1} minutes", 15: ts.Hours, ts.Minutes); 16: else if (ts.Minutes > 5) 17: return string.Format("{0} minutes", ts.Minutes); 18: else if (ts.Minutes > 0) 19: return string.Format("{0} mintutes, {1} seconds", 20: ts.Minutes, ts.Seconds); 21: else 22: return string.Format("{0} seconds", ts.Seconds); 23: } 24: else 25: return "Not valid"; 26: } 27: } Finally, here is the piece of the view used to render the tweets. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: <ul class="tweets"> 2: <% 3: foreach (var tweet in Model.Tweets) 4: { 5: %> 6: <li class="tweets"> 7: <span class="tweetTime"><%=tweet.CreatedAt.ToAgo() %> ago</span>: 8: <%=tweet.Text%> 9: </li> 10: <%} %> 11: </ul>

Read the article

Disabling the right-click sub menu using JQuery

- by nikolaosk

Recently I needed to disable the right-click contextual menu in an HTML page for a very simple HTML application I was creating for a friend.This is going to be a short post where I will demonstrate how to disable the right-click contextual menu.I will use the very popular JQuery Library. Please download the library (minified version) from http://jquery.com/downloadPlease find here all my posts regarding JQuery.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. I am going to create a very simple HTML 5 page with some text and an image. The HTML markup for the page follows. <!DOCTYPE html><html lang="en"> <head> <title>HTML 5, CSS3 and JQuery</title> <meta http-equiv="Content-Type" content="text/html;charset=utf-8" > <link rel="stylesheet" type="text/css" href="style.css"> <script type="text/javascript" src="jquery-1.8.2.min.js"> </script><script type="text/javascript"> (function ($) { $(document).bind('contextmenu', function () { return false;}); })(jQuery); </script> </head> <body> <div id="header"> <h1>Learn cutting edge technologies</h1> <h2>HTML 5, JQuery, CSS3</h2> </div> <figure> <img src="html5.png" alt="HTML 5"></figure> <div id="main"> <h2>HTML 5</h2> <article> <p> HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML. </p> </article> </div> </body> </html> This is the JQuery code, I use (function ($) { $(document).bind('contextmenu', function () { return false;}); })(jQuery); I simply disable/cancel the contextmenu event.When I load the simple page on the browser and I right-click the context menu does not appear.Hope it helps!!!

Read the article

WPF storyboard animation issue when using VisualBrush

- by Flack

Hey guys, I was playing around with storyboards, a flipping animation, and visual brushes. I have encountered an issue though. Below is the xaml and code-behind of a small sample I quickly put together to try to demonstrate the problem. When you first start the app, you are presented with a red square and two buttons. If you click the "Flip" button, the red square will "flip" over and a blue one will appear. In reality, all that is happening is that the scale of the width of the StackPanel that the red square is in is being decreased until it reaches zero and then the StackPanel where a blue square is, whose width is initially scaled to zero, has its width increased. If you click the "Flip" button a few times, the animation looks ok and smooth. Now, if you hit the "Reflection" button, a reflection of the red/blue buttons is added to their respective StackPanels. Hitting the "Flip" button now will still cause the flip animation but it is no longer a smooth animation. The StackPanels width often does not shrink to zero. The width shrinks somewhat but then just stops before being completely invisible. Then the other StackPanel appears as usual. The only thing that changed was adding the reflection, which is just a VisualBrush. Below is the code. Does anyone have any idea why the animations are different between the two cases (stalling in the second case)? Thanks. <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xml:lang="en-US" xmlns:d="http://schemas.microsoft.com/expression/blend/2006" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" x:Class="WpfFlipTest.Window1" x:Name="Window" Title="Window1" Width="214" Height="224"> <Window.Resources> <Storyboard x:Key="sbFlip"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="redStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.4" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.4" Storyboard.TargetName="blueStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.8" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> <Storyboard x:Key="sbFlipBack"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="blueStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.4" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.4" Storyboard.TargetName="redStack" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.8" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </Window.Resources> <Grid x:Name="LayoutRoot" Background="Gray"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="Auto"/> </Grid.ColumnDefinitions> <StackPanel Name="redStack" Grid.Row="0" Grid.Column="0" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform/> </StackPanel.RenderTransform> <Border Name="redBorder" BorderBrush="Transparent" BorderThickness="4" Width="Auto" Height="Auto"> <Button Margin="0" Name="redButton" Height="75" Background="Red" Width="105" /> </Border> <Border Width="{Binding ElementName=redBorder, Path=ActualWidth}" Height="{Binding ElementName=redBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent" BorderThickness="4" Name="redRefelction" Visibility="Collapsed"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=redButton}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <StackPanel Name="blueStack" Grid.Row="0" Grid.Column="0" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform ScaleX="0"/> </StackPanel.RenderTransform> <Border Name="blueBorder" BorderBrush="Transparent" BorderThickness="4" Width="Auto" Height="Auto"> <Button Grid.Row="0" Grid.Column="1" Margin="0" Width="105" Background="Blue" Name="blueButton" Height="75"/> </Border> <Border Width="{Binding ElementName=blueBorder, Path=ActualWidth}" Height="{Binding ElementName=blueBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent" BorderThickness="4" Name="blueRefelction" Visibility="Collapsed"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=blueButton}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <Button Grid.Row="1" Click="FlipButton_Click" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76">Flip</Button> <Button Grid.Row="0" Grid.Column="1" Click="ReflectionButton_Click" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76">Reflection</Button> </Grid> </Window> Here are the button click handlers: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using System.Windows.Media.Animation; namespace WpfFlipTest { public partial class Window1 : Window { public Window1() { InitializeComponent(); } bool flipped = false; private void FlipButton_Click(object sender, RoutedEventArgs e) { Storyboard sbFlip = (Storyboard)Resources["sbFlip"]; Storyboard sbFlipBack = (Storyboard)Resources["sbFlipBack"]; if (flipped) { sbFlipBack.Begin(); flipped = false; } else { sbFlip.Begin(); flipped = true; } } bool reflection = false; private void ReflectionButton_Click(object sender, RoutedEventArgs e) { if (reflection) { reflection = false; redRefelction.Visibility = Visibility.Collapsed; blueRefelction.Visibility = Visibility.Collapsed; } else { reflection = true; redRefelction.Visibility = Visibility.Visible; blueRefelction.Visibility = Visibility.Visible; } } } } UPDATE: I have been testing this some more to try to find out what is causing the issue I am seeing and I believe I found what is causing the issue. Below I have pasted new xaml and code-behind. The new sample below is very similar to the original sample, with a few minor modifications. The xaml basically consists of two stack panels, each containing two borders. The second border in each stack panel is a visual brush (a reflection of the border above it). Now, when I click the "Flip" button, one stack panel gets its ScaleX reduced to zero, while the second stack panel, whose initial ScaleX is zero, gets its ScaleX increased to 1. This animation gives the illusion of flipping. There are also two textblocks which display the scale factor of each stack panel. I added those to try to diagnose my issue. The issue is (as described in the oringal post) that the flipping animation is not smooth. Every time I hit the flip button, the animation starts but whenever the ScaleX factor gets to around .14 to .16, the animation looks like it stalls and the stack panels never have there ScaleX reduced to zero, so they never totally disappear. Now, the strange thing is that if I change the Width/Height properties of the "frontBorder" and "backBorder" borders defined below to use explict values instead of Auto, such as Width=105 and Height=75 (to match the button in the border) everything works fine. The animation stutters the first two or three times I run it but after that the flips are smooth and flawless. (BTW, when an animation is run for the first time, is there something going on in the background, some sort of initialization, that causes it to be a little slow the first time?) Is it possible that the Auto Width/Height of the borders are causing the issue? I can reproduce it everytime but I am not sure why Auto Width/Height would be a problem. Below is the sample. Thanks for the help. <Window x:Class="FlipTest.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <Window.Resources> <Storyboard x:Key="sbFlip"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="front" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.5" Storyboard.TargetName="back" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> <Storyboard x:Key="sbFlipBack"> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="back" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="0"/> </DoubleAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00.5" Storyboard.TargetName="front" Storyboard.TargetProperty="(UIElement.RenderTransform).(ScaleTransform.ScaleX)"> <SplineDoubleKeyFrame KeyTime="00:00:00.5" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </Window.Resources> <Grid x:Name="LayoutRoot" Background="White" ShowGridLines="True"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="Auto"/> </Grid.ColumnDefinitions> <StackPanel x:Name="front" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform/> </StackPanel.RenderTransform> <Border Name="frontBorder" BorderBrush="Yellow" BorderThickness="2" Width="Auto" Height="Auto"> <Button Margin="0" Name="redButton" Height="75" Background="Red" Width="105" Click="FlipButton_Click"/> </Border> <Border Width="{Binding ElementName=frontBorder, Path=ActualWidth}" Height="{Binding ElementName=frontBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=frontBorder}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <StackPanel x:Name="back" RenderTransformOrigin="0.5,0.5"> <StackPanel.RenderTransform> <ScaleTransform ScaleX="0"/> </StackPanel.RenderTransform> <Border Name="backBorder" BorderBrush="Yellow" BorderThickness="2" Width="Auto" Height="Auto"> <Button Margin="0" Width="105" Background="Blue" Name="blueButton" Height="75" Click="FlipButton_Click"/> </Border> <Border Width="{Binding ElementName=backBorder, Path=ActualWidth}" Height="{Binding ElementName=backBorder, Path=ActualHeight}" Opacity="0.2" BorderBrush="Transparent"> <Border.OpacityMask> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="Black"/> <GradientStop Offset=".6" Color="Transparent"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.OpacityMask> <Border.Background> <VisualBrush Visual="{Binding ElementName=backBorder}"> <VisualBrush.Transform> <ScaleTransform ScaleX="1" ScaleY="-1" CenterX="52.5" CenterY="37.5" /> </VisualBrush.Transform> </VisualBrush> </Border.Background> </Border> </StackPanel> <Button Grid.Row="1" Click="FlipButton_Click" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76">Flip</Button> <TextBlock Grid.Row="2" Grid.Column="0" Foreground="DarkRed" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76" Text="{Binding ElementName=front, Path=(UIElement.RenderTransform).(ScaleTransform.ScaleX)}"/> <TextBlock Grid.Row="3" Grid.Column="0" Foreground="DarkBlue" Height="19.45" HorizontalAlignment="Left" VerticalAlignment="Top" Width="76" Text="{Binding ElementName=back, Path=(UIElement.RenderTransform).(ScaleTransform.ScaleX)}"/> </Grid> </Window> Code-behind: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Navigation; using System.Windows.Shapes; using System.Windows.Media.Animation; namespace FlipTest { /// <summary> /// Interaction logic for Window1.xaml /// </summary> public partial class Window1 : Window { public Window1() { InitializeComponent(); } bool flipped = false; private void FlipButton_Click(object sender, RoutedEventArgs e) { Storyboard sbFlip = (Storyboard)Resources["sbFlip"]; Storyboard sbFlipBack = (Storyboard)Resources["sbFlipBack"]; if (flipped) { sbFlipBack.Begin(); flipped = false; } else { sbFlip.Begin(); flipped = true; } } } }

Read the article

ASP.NET MVC Paging/Sorting/Filtering using the MVCContrib Grid and Pager

- by rajbk

This post walks you through creating a UI for paging, sorting and filtering a list of data items. It makes use of the excellent MVCContrib Grid and Pager Html UI helpers. A sample project is attached at the bottom. Our UI will eventually look like this. The application will make use of the Northwind database. The top portion of the page has a filter area region. The filter region is enclosed in a form tag. The select lists are wired up with jQuery to auto post back the form. The page has a pager region at the top and bottom of the product list. The product list has a link to display more details about a given product. The column headings are clickable for sorting and an icon shows the sort direction. Strongly Typed View Models The views are written to expect strongly typed objects. We suffix these strongly typed objects with ViewModel since they are designed specifically for passing data down to the view. The following listing shows the ProductViewModel. This class will be used to hold information about a Product. We use attributes to specify if the property should be hidden and what its heading in the table should be. This metadata will be used by the MvcContrib Grid to render the table. Some of the properties are hidden from the UI ([ScaffoldColumn(false)) but are needed because we will be using those for filtering when writing our LINQ query. public ActionResult Index( string productName, int? supplierID, int? categoryID, GridSortOptions gridSortOptions, int? page) { var productList = productRepository.GetProductsProjected(); // Set default sort column if (string.IsNullOrWhiteSpace(gridSortOptions.Column)) { gridSortOptions.Column = "ProductID"; } // Filter on SupplierID if (supplierID.HasValue) { productList = productList.Where(a => a.SupplierID == supplierID); } // Filter on CategoryID if (categoryID.HasValue) { productList = productList.Where(a => a.CategoryID == categoryID); } // Filter on ProductName if (!string.IsNullOrWhiteSpace(productName)) { productList = productList.Where(a => a.ProductName.Contains(productName)); } // Create all filter data and set current values if any // These values will be used to set the state of the select list and textbox // by sending it back to the view. var productFilterViewModel = new ProductFilterViewModel(); productFilterViewModel.SelectedCategoryID = categoryID ?? -1; productFilterViewModel.SelectedSupplierID = supplierID ?? -1; productFilterViewModel.Fill(); // Order and page the product list var productPagedList = productList .OrderBy(gridSortOptions.Column, gridSortOptions.Direction) .AsPagination(page ?? 1, 10); var productListContainer = new ProductListContainerViewModel { ProductPagedList = productPagedList, ProductFilterViewModel = productFilterViewModel, GridSortOptions = gridSortOptions }; return View(productListContainer); } The following diagram shows the rest of the key ViewModels in our design. We have a container class called ProductListContainerViewModel which has nested classes. The ProductPagedList is of type IPagination<ProductViewModel>. The MvcContrib expects the IPagination<T> interface to determine the page number and page size of the collection we are working with. You convert any IEnumerable<T> into an IPagination<T> by calling the AsPagination extension method in the MvcContrib library. It also creates a paged set of type ProductViewModel. The ProductFilterViewModel class will hold information about the different select lists and the ProductName being searched on. It will also hold state of any previously selected item in the lists and the previous search criteria (you will recall that this type of state information was stored in Viewstate when working with WebForms). With MVC there is no state storage and so all state has to be fetched and passed back to the view. The GridSortOptions is a type defined in the MvcContrib library and is used by the Grid to determine the current column being sorted on and the current sort direction. The following shows the view and partial views used to render our UI. The Index view expects a type ProductListContainerViewModel which we described earlier. <%Html.RenderPartial("SearchFilters", Model.ProductFilterViewModel); %> <% Html.RenderPartial("Pager", Model.ProductPagedList); %> <% Html.RenderPartial("SearchResults", Model); %> <% Html.RenderPartial("Pager", Model.ProductPagedList); %> The View contains a partial view “SearchFilters” and passes it the ProductViewFilterContainer. The SearchFilter uses this Model to render all the search lists and textbox. The partial view “Pager” uses the ProductPageList which implements the interface IPagination. The “Pager” view contains the MvcContrib Pager helper used to render the paging information. This view is repeated twice since we want the pager UI to be available at the top and bottom of the product list. The Pager partial view is located in the Shared directory so that it can be reused across Views. The partial view “SearchResults” uses the ProductListContainer model. This partial view contains the MvcContrib Grid which needs both the ProdctPagedList and GridSortOptions to render itself. The Controller Action An example of a request like this: /Products?productName=test&supplierId=29&categoryId=4. The application receives this GET request and maps it to the Index method of the ProductController. Within the action we create an IQueryable<ProductViewModel> by calling the GetProductsProjected() method. /// <summary> /// This method takes in a filter list, paging/sort options and applies /// them to an IQueryable of type ProductViewModel /// </summary> /// <returns> /// The return object is a container that holds the sorted/paged list, /// state for the fiters and state about the current sorted column /// </returns> public ActionResult Index( string productName, int? supplierID, int? categoryID, GridSortOptions gridSortOptions, int? page) { var productList = productRepository.GetProductsProjected(); // Set default sort column if (string.IsNullOrWhiteSpace(gridSortOptions.Column)) { gridSortOptions.Column = "ProductID"; } // Filter on SupplierID if (supplierID.HasValue) { productList.Where(a => a.SupplierID == supplierID); } // Filter on CategoryID if (categoryID.HasValue) { productList = productList.Where(a => a.CategoryID == categoryID); } // Filter on ProductName if (!string.IsNullOrWhiteSpace(productName)) { productList = productList.Where(a => a.ProductName.Contains(productName)); } // Create all filter data and set current values if any // These values will be used to set the state of the select list and textbox // by sending it back to the view. var productFilterViewModel = new ProductFilterViewModel(); productFilterViewModel.SelectedCategoryID = categoryID ?? -1; productFilterViewModel.SelectedSupplierID = supplierID ?? -1; productFilterViewModel.Fill(); // Order and page the product list var productPagedList = productList .OrderBy(gridSortOptions.Column, gridSortOptions.Direction) .AsPagination(page ?? 1, 10); var productListContainer = new ProductListContainerViewModel { ProductPagedList = productPagedList, ProductFilterViewModel = productFilterViewModel, GridSortOptions = gridSortOptions }; return View(productListContainer); } The supplier, category and productname filters are applied to this IQueryable if any are present in the request. The ProductPagedList class is created by applying a sort order and calling the AsPagination method. Finally the ProductListContainerViewModel class is created and returned to the view. You have seen how to use strongly typed views with the MvcContrib Grid and Pager to render a clean lightweight UI with strongly typed views. You also saw how to use partial views to get data from the strongly typed model passed to it from the parent view. The code also shows you how to use jQuery to auto post back. The sample is attached below. Don’t forget to change your connection string to point to the server containing the Northwind database. NorthwindSales_MvcContrib.zip My name is Kobayashi. I work for Keyser Soze.

Read the article

C++ FBX Animation Importer Using the FBX SDK

- by Mike Sawayda

Does anyone have any experience using the FBX SDK to load in animations. I got the meshes loaded in correctly with all of their verts, indices, UV's, and normals. I am just now trying to get the Animations working correctly. I have looked at the FBX SDK documentation with little help. If someone could just help me get started or point me in the right direction I would greatly appreciate it. I added some code so you can kinda get an idea of what I am doing. I should be able to place that code anywhere in the load FBX function and have it work. //GETTING ANIMAION DATA for(int i = 0; i < scene->GetSrcObjectCount<FbxAnimStack>(); ++i) { FbxAnimStack* lAnimStack = scene->GetSrcObject<FbxAnimStack>(i); FbxString stackName = "Animation Stack Name: "; stackName += lAnimStack->GetName(); string sStackName = stackName; int numLayers = lAnimStack->GetMemberCount<FbxAnimLayer>(); for(int j = 0; j < numLayers; ++j) { FbxAnimLayer* lAnimLayer = lAnimStack->GetMember<FbxAnimLayer>(j); FbxString layerName = "Animation Stack Name: "; layerName += lAnimLayer->GetName(); string sLayerName = layerName; queue<FbxNode*> nodes; FbxNode* tempNode = scene->GetRootNode(); while(tempNode != NULL) { FbxAnimCurve* lAnimCurve = tempNode->LclTranslation.GetCurve(lAnimLayer, FBXSDK_CURVENODE_COMPONENT_X); if(lAnimCurve != NULL) { //I know something needs to be done here but I dont know what. } for(int i = 0; i < tempNode->GetChildCount(false); ++i) { nodes.push(tempNode->GetChild(i)); } if(nodes.size() > 0) { tempNode = nodes.front(); nodes.pop(); } else { tempNode = NULL; } } } } Here is the full function bool FBXLoader::LoadFBX(ParentMeshObject* _parentMesh, char* _filePath, bool _hasTexture) { FbxManager* fbxManager = FbxManager::Create(); if(!fbxManager) { printf( "ERROR %s : %d failed creating FBX Manager!\n", __FILE__, __LINE__ ); } FbxIOSettings* ioSettings = FbxIOSettings::Create(fbxManager, IOSROOT); fbxManager->SetIOSettings(ioSettings); FbxString filePath = FbxGetApplicationDirectory(); fbxManager->LoadPluginsDirectory(filePath.Buffer()); FbxScene* scene = FbxScene::Create(fbxManager, ""); int fileMinor, fileRevision; int sdkMajor, sdkMinor, sdkRevision; int fileFormat; FbxManager::GetFileFormatVersion(sdkMajor, sdkMinor, sdkRevision); FbxImporter* importer = FbxImporter::Create(fbxManager, ""); if(!fbxManager->GetIOPluginRegistry()->DetectReaderFileFormat(_filePath, fileFormat)) { //Unrecognizable file format. Try to fall back on FbxImorter::eFBX_BINARY fileFormat = fbxManager->GetIOPluginRegistry()->FindReaderIDByDescription("FBX binary (*.fbx)"); } bool importStatus = importer->Initialize(_filePath, fileFormat, fbxManager->GetIOSettings()); importer->GetFileVersion(fileMinor, fileMinor, fileRevision); if(!importStatus) { printf( "ERROR %s : %d FbxImporter Initialize failed!\n", __FILE__, __LINE__ ); return false; } importStatus = importer->Import(scene); if(!importStatus) { printf( "ERROR %s : %d FbxImporter failed to import the file to the scene!\n", __FILE__, __LINE__ ); return false; } FbxAxisSystem sceneAxisSystem = scene->GetGlobalSettings().GetAxisSystem(); FbxAxisSystem axisSystem( FbxAxisSystem::eYAxis, FbxAxisSystem::eParityOdd, FbxAxisSystem::eLeftHanded ); if(sceneAxisSystem != axisSystem) { axisSystem.ConvertScene(scene); } TriangulateRecursive(scene->GetRootNode()); FbxArray<FbxMesh*> meshes; FillMeshArray(scene, meshes); unsigned short vertexCount = 0; unsigned short triangleCount = 0; unsigned short faceCount = 0; unsigned short materialCount = 0; int numberOfVertices = 0; for(int i = 0; i < meshes.GetCount(); ++i) { numberOfVertices += meshes[i]->GetPolygonVertexCount(); } Face face; vector<Face> faces; int indicesCount = 0; int ptrMove = 0; float wValue = 0.0f; if(!_hasTexture) { wValue = 1.0f; } for(int i = 0; i < meshes.GetCount(); ++i) { int vertexCount = 0; vertexCount = meshes[i]->GetControlPointsCount(); if(vertexCount == 0) continue; VertexType* vertices; vertices = new VertexType[vertexCount]; int triangleCount = meshes[i]->GetPolygonVertexCount() / 3; indicesCount = meshes[i]->GetPolygonVertexCount(); FbxVector4* fbxVerts = new FbxVector4[vertexCount]; int arrayIndex = 0; memcpy(fbxVerts, meshes[i]->GetControlPoints(), vertexCount * sizeof(FbxVector4)); for(int j = 0; j < triangleCount; ++j) { int index = 0; FbxVector4 fbxNorm(0, 0, 0, 0); FbxVector2 fbxUV(0, 0); bool texCoordFound = false; face.indices[0] = index = meshes[i]->GetPolygonVertex(j, 0); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 0, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 0, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; face.indices[1] = index = meshes[i]->GetPolygonVertex(j, 1); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 1, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 1, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; face.indices[2] = index = meshes[i]->GetPolygonVertex(j, 2); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 2, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 2, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; faces.push_back(face); } meshes[i]->Destroy(); meshes[i] = NULL; int indexCount = faces.size() * 3; unsigned long* indices = new unsigned long[faces.size() * 3]; int indicie = 0; for(unsigned int i = 0; i < faces.size(); ++i) { indices[indicie++] = faces[i].indices[0]; indices[indicie++] = faces[i].indices[1]; indices[indicie++] = faces[i].indices[2]; } faces.clear(); _parentMesh->AddChild(vertices, indices, vertexCount, indexCount); } return true; }

Read the article

Using Unity – Part 2

- by nmarun

In the first part of this series, we created a simple project and learned how to implement IoC pattern using Unity. In this one, I’ll show how you can instantiate other types that implement our IProduct interface. One place where this one would want to use this feature is to create mock types for testing purposes. Alright, let’s dig in. I added another class – Product2.cs to the ProductModel project. 1: public class Product2 : IProduct 2: { 3: public string Name { get; set;} 4: public Category Category { get; set; } 5: public DateTime MfgDate { get;set; } 6: 7: public Product2() 8: { 9: Name = "Canon Digital Rebel XTi"; 10: Category = new Category {Name = "Electronics", SubCategoryName = "Digital Cameras"}; 11: MfgDate = DateTime.Now; 12: } 13: 14: public string WriteProductDetails() 15: { 16: return string.Format("Name: {0}<br/>Category: {1}<br/>Mfg Date: {2}", 17: Name, Category, MfgDate.ToShortDateString()); 18: } 19: } Highlights of this class are that it implements IProduct interface and it has some different properties than the Product class. The Category class looks like below: 1: public class Category 2: { 3: public string Name { get; set; } 4: public string SubCategoryName { get; set; } 5: 6: public override string ToString() 7: { 8: return string.Format("{0} - {1}", Name, SubCategoryName); 9: } 10: } We’ll go to our web.config file to add the configuration information about this new class – Product2 that we created. Let’s first add a typeAlias element. 1: <typeAlias alias="Product2" type="ProductModel.Product2, ProductModel"/> That’s all that is needed for us to get an instance of Product2 in our application. I have a new button added to the .aspx page and the click event of this button is where all the magic happens: 1: private IUnityContainer unityContainer; 2: protected void Page_Load(object sender, EventArgs e) 3: { 4: unityContainer = Application["UnityContainer"] as IUnityContainer; 5: 6: if (unityContainer == null) 7: { 8: productDetailsLabel.Text = "ERROR: Unity Container not populated in Global.asax.<p />"; 9: } 10: else 11: { 12: if (!IsPostBack) 13: { 14: IProduct productInstance = unityContainer.Resolve<IProduct>(); 15: productDetailsLabel.Text = productInstance.WriteProductDetails(); 16: } 17: } 18: } 19: 20: protected void Product2Button_Click(object sender, EventArgs e) 21: { 22: unityContainer.RegisterType<IProduct, Product2>(); 23: IProduct product2Instance = unityContainer.Resolve<IProduct>(); 24: productDetailsLabel.Text = product2Instance.WriteProductDetails(); 25: } The unityContainer instance is set in the Page_Load event. Line 22 in the click event of the Product2Button registers a type mapping in the container. In English, this means that when unityContainer tries to resolve for IProduct, it gets an instance of Product2. Once this code runs, following output is rendered: There’s another way of doing this. You can resolve an instance of the requested type with a name from the container. We’ll have to update the container element of our web.config file to include the following: 1: <container name="unityContainer"> 2: <types> 3: <type type="IProduct" mapTo="Product"/> 4:  5: <type type="IProduct" mapTo="Product" name="LegacyProduct" /> 6:  7: <type type="IProduct" mapTo="Product2" name="NewProduct" /> 8: </types> 9: </container> I’ve added a Dropdownlist and a button to the design page: 1: <asp:DropDownList ID="ModelTypesList" runat="server"> 2: <asp:ListItem Text="Legacy Product" Value="LegacyProduct" /> 3: <asp:ListItem Text="New Product" Value="NewProduct" /> 4: </asp:DropDownList> 5: <br /> 6: <asp:Button ID="SelectedModelButton" Text="Get Selected Instance" runat="server" 7: onclick="SelectedModelButton_Click" /> 1: protected void SelectedModelButton_Click(object sender, EventArgs e) 2: { 3: // get the selected value: LegacyProduct or NewProduct 4: string modelType = ModelTypesList.SelectedValue; 5: // pass the modelType to the Resolve method 6: IProduct customModel = unityContainer.Resolve<IProduct>(modelType); 7: productDetailsLabel.Text = customModel.WriteProductDetails(); 8: } Pretty straight forward right? The only thing to note here is that the values in the dropdownlist item need to match the name attribute of the type. Depending on what you select, you’ll get an instance of either the Product class or the Product2 class and the corresponding WriteProductDetails() method is called. Now you see, how either of these methods can be used to create mock objects your the test project. See the code here. I’ll continue to share more of Unity in the next blog.

Read the article

Using RIA DomainServices with ASP.NET and MVC 2

- by Bobby Diaz

Recently, I started working on a new ASP.NET MVC 2 project and I wanted to reuse the data access (LINQ to SQL) and business logic methods (WCF RIA Services) that had been developed for a previous project that used Silverlight for the front-end. I figured that I would be able to instantiate the various DomainService classes from within my controller’s action methods, because after all, the code for those services didn’t look very complicated. WRONG! I didn’t realize at first that some of the functionality is handled automatically by the framework when the domain services are hosted as WCF services. After some initial searching, I came across an invaluable post by Joe McBride, which described how to get RIA Service .svc files to work in an MVC 2 Web Application, and another by Brad Abrams. Unfortunately, Brad’s solution was for an earlier preview release of RIA Services and no longer works with the version that I am running (PDC Preview). I have not tried the RC version of WCF RIA Services, so I am not sure if any of the issues I am having have been resolved, but I wanted to come up with a way to reuse the shared libraries so I wouldn’t have to write a non-RIA version that basically did the same thing. The classes I came up with work with the scenarios I have encountered so far, but I wanted to go ahead and post the code in case someone else is having the same trouble I had. Hopefully this will save you a few headaches! 1. Querying When I first tried to use a DomainService class to perform a query inside one of my controller’s action methods, I got an error stating that “This DomainService has not been initialized.” To solve this issue, I created an extension method for all DomainServices that creates the required DomainServiceContext and passes it to the service’s Initialize() method. Here is the code for the extension method; notice that I am creating a sort of mock HttpContext for those cases when the service is running outside of IIS, such as during unit testing! public static class ServiceExtensions { /// <summary> /// Initializes the domain service by creating a new <see cref="DomainServiceContext"/> /// and calling the base DomainService.Initialize(DomainServiceContext) method. /// </summary> /// <typeparam name="TService">The type of the service.</typeparam> /// <param name="service">The service.</param> /// <returns></returns> public static TService Initialize<TService>(this TService service) where TService : DomainService { var context = CreateDomainServiceContext(); service.Initialize(context); return service; } private static DomainServiceContext CreateDomainServiceContext() { var provider = new ServiceProvider(new HttpContextWrapper(GetHttpContext())); return new DomainServiceContext(provider, DomainOperationType.Query); } private static HttpContext GetHttpContext() { var context = HttpContext.Current; #if DEBUG // create a mock HttpContext to use during unit testing... if ( context == null ) { var writer = new StringWriter(); var request = new SimpleWorkerRequest("/", "/", String.Empty, String.Empty, writer); context = new HttpContext(request) { User = new GenericPrincipal(new GenericIdentity("debug"), null) }; } #endif return context; } } With that in place, I can use it almost as normally as my first attempt, except with a call to Initialize(): public ActionResult Index() { var service = new NorthwindService().Initialize(); var customers = service.GetCustomers(); return View(customers); } 2. Insert / Update / Delete Once I got the records showing up, I was trying to insert new records or update existing data when I ran into the next issue. I say issue because I wasn’t getting any kind of error, which made it a little difficult to track down. But once I realized that that the DataContext.SubmitChanges() method gets called automatically at the end of each domain service submit operation, I could start working on a way to mimic the behavior of a hosted domain service. What I came up with, was a base class called LinqToSqlRepository<T> that basically sits between your implementation and the default LinqToSqlDomainService<T> class. [EnableClientAccess()] public class NorthwindService : LinqToSqlRepository<NorthwindDataContext> { public IQueryable<Customer> GetCustomers() { return this.DataContext.Customers; } public void InsertCustomer(Customer customer) { this.DataContext.Customers.InsertOnSubmit(customer); } public void UpdateCustomer(Customer currentCustomer) { this.DataContext.Customers.TryAttach(currentCustomer, this.ChangeSet.GetOriginal(currentCustomer)); } public void DeleteCustomer(Customer customer) { this.DataContext.Customers.TryAttach(customer); this.DataContext.Customers.DeleteOnSubmit(customer); } } Notice the new base class name (just change LinqToSqlDomainService to LinqToSqlRepository). I also added a couple of DataContext (for Table<T>) extension methods called TryAttach that will check to see if the supplied entity is already attached before attempting to attach it, which would cause an error! 3. LinqToSqlRepository<T> Below is the code for the LinqToSqlRepository class. The comments are pretty self explanatory, but be aware of the [IgnoreOperation] attributes on the generic repository methods, which ensures that they will be ignored by the code generator and not available in the Silverlight client application. /// <summary> /// Provides generic repository methods on top of the standard /// <see cref="LinqToSqlDomainService<TContext>"/> functionality. /// </summary> /// <typeparam name="TContext">The type of the context.</typeparam> public abstract class LinqToSqlRepository<TContext> : LinqToSqlDomainService<TContext> where TContext : System.Data.Linq.DataContext, new() { /// <summary> /// Retrieves an instance of an entity using it's unique identifier. /// </summary> /// <typeparam name="TEntity">The type of the entity.</typeparam> /// <param name="keyValues">The key values.</param> /// <returns></returns> [IgnoreOperation] public virtual TEntity GetById<TEntity>(params object[] keyValues) where TEntity : class { var table = this.DataContext.GetTable<TEntity>(); var mapping = this.DataContext.Mapping.GetTable(typeof(TEntity)); var keys = mapping.RowType.IdentityMembers .Select((m, i) => m.Name + " = @" + i) .ToArray(); return table.Where(String.Join(" && ", keys), keyValues).FirstOrDefault(); } /// <summary> /// Creates a new query that can be executed to retrieve a collection /// of entities from the <see cref="DataContext"/>. /// </summary> /// <typeparam name="TEntity">The type of the entity.</typeparam> /// <returns></returns> [IgnoreOperation] public virtual IQueryable<TEntity> GetEntityQuery<TEntity>() where TEntity : class { return this.DataContext.GetTable<TEntity>(); } /// <summary> /// Inserts the specified entity. /// </summary> /// <typeparam name="TEntity">The type of the entity.</typeparam> /// <param name="entity">The entity.</param> /// <returns></returns> [IgnoreOperation] public virtual bool Insert<TEntity>(TEntity entity) where TEntity : class { //var table = this.DataContext.GetTable<TEntity>(); //table.InsertOnSubmit(entity); return this.Submit(entity, null, DomainOperation.Insert); } /// <summary> /// Updates the specified entity. /// </summary> /// <typeparam name="TEntity">The type of the entity.</typeparam> /// <param name="entity">The entity.</param> /// <returns></returns> [IgnoreOperation] public virtual bool Update<TEntity>(TEntity entity) where TEntity : class { return this.Update(entity, null); } /// <summary> /// Updates the specified entity. /// </summary> /// <typeparam name="TEntity">The type of the entity.</typeparam> /// <param name="entity">The entity.</param> /// <param name="original">The original.</param> /// <returns></returns> [IgnoreOperation] public virtual bool Update<TEntity>(TEntity entity, TEntity original) where TEntity : class { if ( original == null ) { original = GetOriginal(entity); } var table = this.DataContext.GetTable<TEntity>(); table.TryAttach(entity, original); return this.Submit(entity, original, DomainOperation.Update); } /// <summary> /// Deletes the specified entity. /// </summary> /// <typeparam name="TEntity">The type of the entity.</typeparam> /// <param name="entity">The entity.</param> /// <returns></returns> [IgnoreOperation] public virtual bool Delete<TEntity>(TEntity entity) where TEntity : class { //var table = this.DataContext.GetTable<TEntity>(); //table.TryAttach(entity); //table.DeleteOnSubmit(entity); return this.Submit(entity, null, DomainOperation.Delete); } protected virtual bool Submit(Object entity, Object original, DomainOperation operation) { var entry = new ChangeSetEntry(0, entity, original, operation); var changes = new ChangeSet(new ChangeSetEntry[] { entry }); return base.Submit(changes); } private TEntity GetOriginal<TEntity>(TEntity entity) where TEntity : class { var context = CreateDataContext(); var table = context.GetTable<TEntity>(); return table.FirstOrDefault(e => e == entity); } } 4. Conclusion So there you have it, a fully functional Repository implementation for your RIA Domain Services that can be consumed by your ASP.NET and MVC applications. I have uploaded the source code along with unit tests and a sample web application that queries the Customers table from inside a Controller, as well as a Silverlight usage example. As always, I welcome any comments or suggestions on the approach I have taken. If there is enough interest, I plan on contacting Colin Blair or maybe even the man himself, Brad Abrams, to see if this is something worthy of inclusion in the WCF RIA Services Contrib project. What do you think? Enjoy!

Read the article

Using delegates in C# (Part 2)

- by rajbk

Part 1 of this post can be read here. We are now about to see the different syntaxes for invoking a delegate and some c# syntactic sugar which allows you to code faster. We have the following console application. 1: public delegate double Operation(double x, double y); 2: 3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: Operation op1 = new Operation(Division); 9: double result = op1.Invoke(10, 5); 10: 11: Console.WriteLine(result); 12: Console.ReadLine(); 13: } 14: 15: static double Division(double x, double y) { 16: return x / y; 17: } 18: } Line 1 defines a delegate type called Operation with input parameters (double x, double y) and a return type of double. On Line 8, we create an instance of this delegate and set the target to be a static method called Division (Line 15) On Line 9, we invoke the delegate (one entry in the invocation list). The program outputs 5 when run. The language provides shortcuts for creating a delegate and invoking it (see line 9 and 11). Line 9 is a syntactical shortcut for creating an instance of the Delegate. The C# compiler will infer on its own what the delegate type is and produces intermediate language that creates a new instance of that delegate. Line 11 uses a a syntactical shortcut for invoking the delegate by removing the Invoke method. The compiler sees the line and generates intermediate language which invokes the delegate. When this code is compiled, the generated IL will look exactly like the IL of the compiled code above. 1: public delegate double Operation(double x, double y); 2: 3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: //shortcut constructor syntax 9: Operation op1 = Division; 10: //shortcut invoke syntax 11: double result = op1(10, 2); 12: 13: Console.WriteLine(result); 14: Console.ReadLine(); 15: } 16: 17: static double Division(double x, double y) { 18: return x / y; 19: } 20: } C# 2.0 introduced Anonymous Methods. Anonymous methods avoid the need to create a separate method that contains the same signature as the delegate type. Instead you write the method body in-line. There is an interesting fact about Anonymous methods and closures which won’t be covered here. Use your favorite search engine ;-)We rewrite our code to use anonymous methods (see line 9): 1: public delegate double Operation(double x, double y); 2: 3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: //Anonymous method 9: Operation op1 = delegate(double x, double y) { 10: return x / y; 11: }; 12: double result = op1(10, 2); 13: 14: Console.WriteLine(result); 15: Console.ReadLine(); 16: } 17: 18: static double Division(double x, double y) { 19: return x / y; 20: } 21: } We could rewrite our delegate to be of a generic type like so (see line 2 and line 9). You will see why soon. 1: //Generic delegate 2: public delegate T Operation<T>(T x, T y); 3: 4: public class Program 5: { 6: [STAThread] 7: static void Main(string[] args) 8: { 9: Operation<double> op1 = delegate(double x, double y) { 10: return x / y; 11: }; 12: double result = op1(10, 2); 13: 14: Console.WriteLine(result); 15: Console.ReadLine(); 16: } 17: 18: static double Division(double x, double y) { 19: return x / y; 20: } 21: } The .NET 3.5 framework introduced a whole set of predefined delegates for us including public delegate TResult Func<T1, T2, TResult>(T1 arg1, T2 arg2); Our code can be modified to use this delegate instead of the one we declared. Our delegate declaration has been removed and line 7 has been changed to use the Func delegate type. 1: public class Program 2: { 3: [STAThread] 4: static void Main(string[] args) 5: { 6: //Func is a delegate defined in the .NET 3.5 framework 7: Func<double, double, double> op1 = delegate (double x, double y) { 8: return x / y; 9: }; 10: double result = op1(10, 2); 11: 12: Console.WriteLine(result); 13: Console.ReadLine(); 14: } 15: 16: static double Division(double x, double y) { 17: return x / y; 18: } 19: } .NET 3.5 also introduced lambda expressions. A lambda expression is an anonymous function that can contain expressions and statements, and can be used to create delegates or expression tree types. We change our code to use lambda expressions. 1: public class Program 2: { 3: [STAThread] 4: static void Main(string[] args) 5: { 6: //lambda expression 7: Func<double, double, double> op1 = (x, y) => x / y; 8: double result = op1(10, 2); 9: 10: Console.WriteLine(result); 11: Console.ReadLine(); 12: } 13: 14: static double Division(double x, double y) { 15: return x / y; 16: } 17: } C# 3.0 introduced the keyword var (implicitly typed local variable) where the type of the variable is inferred based on the type of the associated initializer expression. We can rewrite our code to use var as shown below (line 7). The implicitly typed local variable op1 is inferred to be a delegate of type Func<double, double, double> at compile time. 1: public class Program 2: { 3: [STAThread] 4: static void Main(string[] args) 5: { 6: //implicitly typed local variable 7: var op1 = (x, y) => x / y; 8: double result = op1(10, 2); 9: 10: Console.WriteLine(result); 11: Console.ReadLine(); 12: } 13: 14: static double Division(double x, double y) { 15: return x / y; 16: } 17: } You have seen how we can write code in fewer lines by using a combination of the Func delegate type, implicitly typed local variables and lambda expressions.

Read the article

ASP.NET MVC: Using jQuery context menu with tables

- by DigiMortal

I needed to add context menus to some tables of my intranet application. After trying some components I found one that does everything I need and has no overhead. In this posting I will show you how to use jQuery context menu plug-in and how to attach it to tables. I found context menu plug-in by Chris Domigan and it was very easy to integrate to my application (when comparing some other plug-ins that work only on demo pages and in simple scenarios). Thanks, Chris, for great work! Now let’s use this context menu plug-in with table. Before we go on let’s see what we are trying to achieve. The following screenshot fragment shows simple context menu that we want to attach to our table. And when we click some menu option then something should happen too. :) Installing context menu plug-in Download plug-in (if download link is broken then open demo page and I think you know how to get plug-in from there). Copy jquery.contextmenu.js to your scripts folder. Include it in your masterpage or in the page where you plan to use context menus. Make sure plug-in is included correctly (use Firebug or some other tool you like). Save the page. Defining context menu Now let’s define context menu. Here is fragment on context menu definition from my code. <div class="contextMenu" id="myMenu1"> <ul> <li id="email"><img src="/img/e-mail.png" />E-mail</li> <li id="homepage"><img src="/img/homepage.png" />Homepage</li> </ul> </div> div with id myMenu1 is container of context menu. Unordered list inside container defines items in context menu – simple and elegant! Adding context menu to table I have table with persons. It is simple HTML. I omitted commands column from this and the next table to keep them simple and more easily readable. <table> <tr> <th>Name</th> <th>Short</th> <th>Address</th> <th>Mobile</th> <th>E-mail</th> </tr> <% foreach(var person in Model.Results) { %> <tr> <td><%=person.FullName %></td> <td><%=person.ShortName %></td> <td><%=person.FullAddress %></td> <td><%=person.Mobile %></td> <td><%=person.Email %></td> </tr> <% } %> </table> To get context menu linked to table rows first cells we need to specify class for cells and ID. We need ID because we have to know later which ID has the row on which user selected something from context menu. <table> <tr> <th>Name</th> <th>Short</th> <th>Address</th> <th>Mobile</th> <th>E-mail</th> </tr> <% foreach(var person in Model.Results) { %> <tr> <td class="showContext" id="<%= person.Id %>"><%=person.FullName %></td> <td><%=person.ShortName %></td> <td><%=person.FullAddress %></td> <td><%=person.Mobile %></td> <td><%=person.Email %></td> </tr> <% } %> </table> Now we have only one thing to do – we have to write some code that attaches context menu to table cells. Catching context menu events Now we will make everything work. Relax, it is only couple of lines of code, thank to jQuery. <script type="text/javascript"> $(document).ready(function () { $('td.showContext').contextMenu('myMenu1', { bindings: { 'email': function (t) { document.location.href = '/contact/sendmail/' + t.id; }, 'homepage': function (t) { document.location.href = '/contact/homepage/' + t.id; } } }); }); </script> I think that first lines doesn’t need any comments. Take a look at bindings. We gave ID to table cells because it is carried also to bound events. We can use also more complex ID-s if we have more than one table with context menus on our form. Now we are done. Save all files, compile solution, run it and try out how context menu works. Conclusion We saw than using jQuery with context menu component allows us easily create powerful context menus for our user interfaces. Context menu was very easy to define. We were also able to attach context menu to table and use ID of current row entity also in events of context menu. To achieve this we needed only some minor modifications in view and couple of lines of JavaScript.

Read the article

Recover Data Like a Forensics Expert Using an Ubuntu Live CD

- by Trevor Bekolay

There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

Read the article

Weblogic domain scale up using EM Grid Control 11gR1

- by dmitry.nefedkin(at)oracle.com

As you know a weblogic domain consists of set of servers running independently or in a cluster mode, sharing the distributed resources. And in most environments weblogic cluster consists of multiple managed servers running simultaneously and working together to provide increased scalability and reliability. These servers can run on the same machine, or be located on different machines. It's a common task to increase a cluster's capacity by adding new machines to the cluster to host the new server instances. You can do it by manually installing weblogic binaries to the new host and use pack/unpack commands to add a managed server to this new host. But with Enterprise Manager Grid Control 11gR1 (EMGC) there is another way - Fusion Middleware Domain Scale Up procedure. I'm going to show you how it works.Here is a picture of my medrec_oradb weblogic domain, what is registered in EMGC. It contains an admin server and a cluster MedRecCluster with the single managed server MS1. Both admin and managed servers are on the same host oel46-vmware, it's a virtual machine with OEL 4.6 that runs inside our Oracle VM infrastructure. And here are the application deployments, note that couple of applications are deployed to the cluster.First of all I have to prepare a new machine that will host new managed sever of my cluster. I created new VM with OEL 5.4 using the corresponding Oracle VM template available in Oracle E-Delivery site for Oracle Linux and Oracle VM and named it wls1032. Next step is to install Oracle EM Grid Control 11gR1 Agent to this new host. You can download it from the OTN page and install it manually, or you can use Agent Installation Deployment procedure available in EMGC (Deployments->Agent Installation->Install Agent). Anyway, when you agent is up and running on the new machine, you will see it in EMGC Console in the Targets->Hosts subtab.Now we are ready to scale up our weblogic domain. Click the Deployments tab in Oracle Enterprise Manager Grid Control, and then click Deployment Procedure. Select a Fusion Middleware Domain Scale Up procedure from the list, and click Schedule Deployment. The first page of the FMW Domain Scale Up Wizard is displayed and you can proceed with the deployment process.Select the domain from list, enter the working directory on the admin server host, and also fill the weblogic credentials for the administration server console and the OS credentials for the admin server host. Click Next button. The next step allows you to configure you domain, to add a new manager server to the cluster you should select the cluster in the tree and click Add Server button. Select the newly added server in a tree, choose the target host and enter the configuration details of your managed server. You can also add new machine and node manager details. Please note that you cannot change the values in Domain Location and Fusion Middleware Home fields, so these locations on the target host will be the same as for the admin server host. Working directory on the target host should have enough free space to store FMW home binaries and domain configuration files. In my experience the working directories should have at least 3 Gb of free space. The last thing you should fill is the OS credentials for the target host. The next steps allows you to schedule the execution of the procedure, it is started immediately in my example. The last step is just a review the configuration for the domain scale up. Click Submit to launch the process. You can track the status of the procedure execution by selecting Deployments->Deployment Procedures->Procedure Completion Status in the EMGC Console.As you can see in the picture below, the procedure consists of the many steps, and I'm going to share my experience about the issues that I had at some of the steps. Please keep in mind that you can always continue the execution from the last successfully completed step by clicking Retry button.Check OUI Prerequisites step may fail if the target host does not pass prerequisites checks for Weblogic Server installation such as amount of RAM, linux packages installed, etc. Create FMW Clone Archive step may fail if you do not have enough free space in the working directory on the administration server host.Transfer cloning archive to targets step may fail if the EMGC agents on the admin server host or on target host are not secured. You should secure the agent by issuing ./emctl secure agent command from $AGENT_HOME/bin directory and entering the agent registration password.Both Transfer cloning archive to targets and Apply Clone at target hosts steps may fail if you do not have enough free space in the working directory on the target host. The most complicated issue I had on the Run Inventory Collection step. The step failed and I noticed that the agent on the target server is also failed with the following error in the $AGENT_HOME/sysman/log/emagent.trc log file:2010-12-28 11:50:34,310 Thread-2838952848 ERROR upload: Failed to upload file A0000008.xml: Fatal Error.Response received: 500|ORA-20603: The timezone of the multiagent target (/Farm_Localhost_MedRec_medrec_oradb/medrec_oradb,weblogic_domain)is not consistent with the timezone (America/Los_Angeles) reported by other agents.2010-12-28 11:50:34,310 Thread-2838952848 ERROR upload: 1 Failure(s) in a row or XML error for A0000008.xml, retcode = -6, we give up2010-12-28 11:50:35,552 Thread-2838952848 WARN upload: FxferSend: received fatal error in header from repository: https://oel46-vmware:1159/em/uploadFATAL_ERROR::500|ORA-20603: The timezone of the multiagent target (/Farm_Localhost_MedRec_medrec_oradb/medrec_oradb,weblogic_domain)is not consistent with the timezone (America/Los_Angeles) reported by other agents.2010-12-28 11:50:35,552 Thread-2838952848 ERROR upload: number of fatal error exceeds the limit 32010-12-28 11:50:35,552 Thread-2838952848 ERROR upload: agent will shutdown now2010-12-28 11:50:35,552 Thread-2838952848 ERROR : Signalled to Exit with status 55. Too many fatal upload failures2010-12-28 11:50:35,552 Thread-2838952848 ERROR upload: 1 Failure(s) in a row or XML error for A0000008.xml, retcode = -6, we give up2010-12-28 11:50:35,552 Thread-3044607680 ERROR main: EMAgent abnormal terminatingI checked the timezone of my domain target inside EMGC repositoryselect timezone_regionfrom mgmt_targets where target_type = 'weblogic_domain' and display_name = 'medrec_oradb'"TIMEZONE_REGION""America/Los_Angeles"Then checked the timezone of my agents and indeed, they differedselect target_name, timezone_region from mgmt_targets where type_display_name = 'Agent'"TARGET_NAME" "TIMEZONE_REGION""oel46-vmware:3872" "America/Los_Angeles""wls1032.imc.fors.ru:3872" "America/New_York"So I had to change the timezone on the wls1032 host and propagate this changes to the agent and to the EMGC repository. Here was the steps:issued system-config-date command on wls1032.imc.fors.ru and set timezone to "America/Los_Angeles"propagated the changes to the agent bu executing ./emctl resetTZ agent command from $AGENT_HOME/bin directoryconnected to EMGC repository as sysman and executed the following PL/SQL block: begin mgmt_target.set_agent_tzrgn('wls1032.imc.fors.ru:3872','America/Los_Angeles'); commit; end;After that I had to clear the pending uploads on wls1032.imc.fors.ru: rm -r $AGENT_HOME/sysman/emd/state/* rm -r $AGENT_HOME/sysman/emd/collection/* rm -r $AGENT_HOME/sysman/emd/upload/* rm $AGENT_HOME/sysman/emd/lastupld.xml rm $AGENT_HOME/sysman/emd/agntstmp.txt $AGENT_HOME/bin/emctl start agent $AGENT_HOME/bin/emctl clearstate agentThe last part of this solution was to resync the agent in EMGC console by clicking Agent Resynchronization button (please leave "Unblock agent on successful completion of agent resynchronization" checkbox checked in the next screen).After that I issued ./emctl upload command from $AGENT_HOME/bin on the wls1032 host, and my previous error disappeared, but I catched another one: EMD upload error: Failed to upload file A0000004.xml: HTTP error.Response received: ERROR-400|Data will be rejected for upload from agent 'https://wls1032.imc.fors.ru:3872/emd/main/', max size limit for direct load exceeded [7544731/5242880]So the uploading XML file size was 7 Mb, and the limit on OMS was 5 Mb. To increase the max file size limit to 20 Mb I had to connect to the OMS host and execute the following commands from $OMS_HOME/bin directory: ./emctl set property -name em.loader.maxDirectLoadFileSz -value 20971520 -module emoms ./emctl stop oms ./emctl start omsAfter that I issued ./emctl upload command from $AGENT_HOME/bin on the wls1032 one more time and it completed successfully. The agent uploaded the configuration information to the EMGC repository and I was able to see the results of my weblogic domain scale-up in EMGC Console.DeploymentsSo, now the weblogic cluster contains 2 managed servers located on the different hosts. This powerful feature of the Enterprise Manager Grid Control is a part of the WebLogic Server Management Pack Enterprise Edition.

Read the article

Using Find/Replace with regular expressions inside a SSIS package

- by jamiet

Another one of those might-be-useful-again-one-day-so-I’ll-share-it-in-a-blog-post blog posts I am currently working on a SQL Server Integration Services (SSIS) 2012 implementation where each package contains a parameter called ETLIfcHist_ID: During normal execution this will get altered when the package is executed from the Execute Package Task however we want to make sure that at deployment-time they all have a default value of –1. Of course, they tend to get changed during development so I wanted a way of easily changing them all back to the default value. Opening up each package in turn and editing them was an option but given that we have over 40 packages and we might want to carry out this reset fairly frequently I needed a more automated method so I turned to Visual Studio’s Find/Replace… feature Of course, we don’t know what value will be in that parameter so I can’t simply search for a particular value; hence I opted to use a regular expression to identify the value to be change. In the rest of this blog post I’ll explain how to do that. For demonstration purposes I have taken the contents of a .dtsx file and stripped out everything except the element containing the parameters (<DTS:PackageParameters>), if you want to play along at home you can copy-paste the XML document below into a new XML file and open it up in Visual Studio: <?xml version="1.0"?> <DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts"> <DTS:PackageParameters> <DTS:PackageParameter DTS:CreationName="" DTS:DataType="3" DTS:Description="InterfaceHistory_ID: used for Lineage" DTS:DTSID="{635616DB-EEEE-45C8-89AA-713E25846C7E}" DTS:ObjectName="ETLIfcHist_ID"> <DTS:Property DTS:DataType="3" DTS:Name="ParameterValue">VALUE_TO_BE_CHANGED</DTS:Property> </DTS:PackageParameter> <DTS:PackageParameter DTS:CreationName="" DTS:DataType="3" DTS:Description="Some other description" DTS:DTSID="{635616DB-EEEE-45C8-89AA-713E25845C7E}" DTS:ObjectName="SomeOtherObjectName"> <DTS:Property DTS:DataType="3" DTS:Name="ParameterValue">SomeOtherValue</DTS:Property> </DTS:PackageParameter> </DTS:PackageParameters> </DTS:Executable> We are trying to identify the value of the parameter whose name is ETLIfcHist_ID – notice that in the XML document above that value is VALUE_TO_BE_CHANGED. The following regular expression will find the appropriate portion of the XML document: {\<DTS\:PackageParameter[\n ]*DTS\:CreationName="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:DataType="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:Description="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:DTSID="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:ObjectName="ETLIfcHist_ID"\>[\n ]*\<DTS\:Property[\n ]*DTS\:DataType="[A-Za-z0-9\:_\{\}- ]*"[\n ]*DTS\:Name="ParameterValue"\>}[A-Za-z0-9\:_\{\}- ]*{\<\/DTS\:Property\>} I have highlighted the name of the parameter that we’re looking for. I have also highlighted two portions identified by pairs of curly braces “{…}”; these are important because they pick out the two portions either side of the value I want to replace, in other words the portions highlighted here: <DTS:PackageParameters> <DTS:PackageParameter DTS:CreationName="" DTS:DataType="3" DTS:Description="InterfaceHistory_ID: used for Lineage" DTS:DTSID="{635616DB-EEEE-45C8-89AA-713E25846C7E}" DTS:ObjectName="ETLIfcHist_ID"> <DTS:Property DTS:DataType="3" DTS:Name="ParameterValue">VALUE_TO_BE_CHANGED</DTS:Property> </DTS:PackageParameter> Those sections in the curly braces are termed tag expressions and can be identified in the replace expression using a backslash and a number identifying which tag expression you’re referring to according to its ordinal position. Hence, our replace expression is simply: \1-1\2 We’re saying the portion of our file identified by the regular expression should be replaced by the first curly brace section, then the literal –1, then the second curly brace section. Make sense? Give it a go yourself by plugging those two expressions into Visual Studio’s Find and Replace dialog. If you set it to look in “All Open Documents” then you can open up the code-behind of all your packages and change all of them at once. The Find and Replace dialog will look like this: That’s it! I realise that not everyone will be looking to change the value of a parameter but hopefully I have shown you a technique that you can modify to work for your own scenario. Given that this blog post is, y’know, on the web I have no doubt that someone is going to find a fault with my find regex expression and if that person is you….that’s OK. Let me know about it in the comments below and perhaps we can work together to come up with something better! Note that some parameters may have a different set of properties (for example some, but not all, of my parameters have a DTS:Required attribute) so your find regular expression may have to change accordingly. When researching this I found the following article to be invaluable: Visual Studio Find/Replace Regular Expression Usage @Jamiet

Read the article

Using jQuery Live instead of jQuery Hover function

- by hajan

Let’s say we have a case where we need to create mouseover / mouseout functionality for a list which will be dynamically filled with data on client-side. We can use jQuery hover function, which handles the mouseover and mouseout events with two functions. See the following example: <!DOCTYPE html> <html lang="en"> <head id="Head1" runat="server"> <title>jQuery Mouseover / Mouseout Demo</title> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.4.4.js"></script> <style type="text/css"> .hover { color:Red; cursor:pointer;} </style> <script type="text/javascript"> $(function () { $("li").hover( function () { $(this).addClass("hover"); }, function () { $(this).removeClass("hover"); }); }); </script> </head> <body> <form id="form2" runat="server"> <ul> <li>Data 1</li> <li>Data 2</li> <li>Data 3</li> <li>Data 4</li> <li>Data 5</li> <li>Data 6</li> </ul> </form> </body> </html> Now, if you have situation where you want to add new data dynamically... Lets say you have a button to add new item in the list. Add the following code right bellow the </ul> tag <input type="text" id="txtItem" /> <input type="button" id="addNewItem" value="Add New Item" /> And add the following button click functionality: //button add new item functionality $("#addNewItem").click(function (event) { event.preventDefault(); $("<li>" + $("#txtItem").val() + "</li>").appendTo("ul"); }); The mouse over effect won't work for the newly added items. Therefore, we need to use live or delegate function. These both do the same job. The main difference is that for some cases delegate is considered a bit faster, and can be used in chaining. In our case, we can use both. I will use live function. $("li").live("mouseover mouseout", function (event) { if (event.type == "mouseover") $(this).addClass("hover"); else $(this).removeClass("hover"); }); The complete code is: <!DOCTYPE html> <html lang="en"> <head id="Head1" runat="server"> <title>jQuery Mouseover / Mouseout Demo</title> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery/jquery-1.4.4.js"></script> <style type="text/css"> .hover { color:Red; cursor:pointer;} </style> <script type="text/javascript"> $(function () { $("li").live("mouseover mouseout", function (event) { if (event.type == "mouseover") $(this).addClass("hover"); else $(this).removeClass("hover"); }); //button add new item functionality $("#addNewItem").click(function (event) { event.preventDefault(); $("<li>" + $("#txtItem").val() + "</li>").appendTo("ul"); }); }); </script> </head> <body> <form id="form2" runat="server"> <ul> <li>Data 1</li> <li>Data 2</li> <li>Data 3</li> <li>Data 4</li> <li>Data 5</li> <li>Data 6</li> </ul> <input type="text" id="txtItem" /> <input type="button" id="addNewItem" value="Add New Item" /> </form> </body> </html> So, basically when replacing hover with live, you see we use the mouseover and mouseout names for both events. Check the working demo which is available HERE. Hope this was useful blog for you. Hope it’s helpful. HajanReference blog: http://codeasp.net/blogs/hajan/microsoft-net/1260/using-jquery-live-instead-of-jquery-hover-function

Read the article

Static background noise while using new headset Ubuntu 13.04

- by ThundLayr

Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

Read the article

Java EE 6 and NoSQL/MongoDB on GlassFish using JPA and EclipseLink 2.4 (TOTD #175)

- by arungupta

TOTD #166 explained how to use MongoDB in your Java EE 6 applications. The code in that tip used the APIs exposed by the MongoDB Java driver and so requires you to learn a new API. However if you are building Java EE 6 applications then you are already familiar with Java Persistence API (JPA). Eclipse Link 2.4, scheduled to release as part of Eclipse Juno, provides support for NoSQL databases by mapping a JPA entity to a document. Their wiki provides complete explanation of how the mapping is done. This Tip Of The Day (TOTD) will show how you can leverage that support in your Java EE 6 applications deployed on GlassFish 3.1.2. Before we dig into the code, here are the key concepts ... A POJO is mapped to a NoSQL data source using @NoSQL or <no-sql> element in "persistence.xml". A subset of JPQL and Criteria query are supported, based upon the underlying data store Connection properties are defined in "persistence.xml" Now, lets lets take a look at the code ... Download the latest EclipseLink 2.4 Nightly Bundle. There is a Installer, Source, and Bundle - make sure to download the Bundle link (20120410) and unzip. Download GlassFish 3.1.2 zip and unzip. Install the Eclipse Link 2.4 JARs in GlassFish Remove the following JARs from "glassfish/modules": org.eclipse.persistence.antlr.jar org.eclipse.persistence.asm.jar org.eclipse.persistence.core.jar org.eclipse.persistence.jpa.jar org.eclipse.persistence.jpa.modelgen.jar org.eclipse.persistence.moxy.jar org.eclipse.persistence.oracle.jar Add the following JARs from Eclipse Link 2.4 nightly build to "glassfish/modules": org.eclipse.persistence.antlr_3.2.0.v201107111232.jar org.eclipse.persistence.asm_3.3.1.v201107111215.jar org.eclipse.persistence.core.jpql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.core_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa.jpql_2.0.0.v20120407-r11132.jar org.eclipse.persistence.jpa.modelgen_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa_2.4.0.v20120407-r11132.jar org.eclipse.persistence.moxy_2.4.0.v20120407-r11132.jar org.eclipse.persistence.nosql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.oracle_2.4.0.v20120407-r11132.jar Start MongoDB Download latest MongoDB from here (2.0.4 as of this writing). Create the default data directory for MongoDB as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db Refer to Quickstart for more details. Start MongoDB as: arungup-mac:mongodb-osx-x86_64-2.0.4 <arungup> ->./bin/mongod./bin/mongod --help for help and startup optionsMon Apr 9 12:56:02 [initandlisten] MongoDB starting : pid=3124 port=27017 dbpath=/data/db/ 64-bit host=arungup-mac.localMon Apr 9 12:56:02 [initandlisten] db version v2.0.4, pdfile version 4.5Mon Apr 9 12:56:02 [initandlisten] git version: 329f3c47fe8136c03392c8f0e548506cb21f8ebfMon Apr 9 12:56:02 [initandlisten] build info: Darwin erh2.10gen.cc 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 BOOST_LIB_VERSION=1_40Mon Apr 9 12:56:02 [initandlisten] options: {}Mon Apr 9 12:56:02 [initandlisten] journal dir=/data/db/journalMon Apr 9 12:56:02 [initandlisten] recover : no journal files present, no recovery neededMon Apr 9 12:56:02 [websvr] admin web console waiting for connections on port 28017Mon Apr 9 12:56:02 [initandlisten] waiting for connections on port 27017 Check out the JPA/NoSQL sample from SVN repository. The complete source code built in this TOTD can be downloaded here. Create Java EE 6 web app Create a Java EE 6 Maven web app as: mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo.archetypes -DarchetypeArtifactId=webapp-javaee6 -DgroupId=model -DartifactId=javaee-nosql -DarchetypeVersion=1.5 -DinteractiveMode=false Copy the model files from the checked out workspace to the generated project as: cd javaee-nosqlcp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/model src/main/java Copy "persistence.xml" mkdir src/main/resources cp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/META-INF ./src/main/resources Add the following dependencies: <dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.jpa</artifactId> <version>2.4.0-SNAPSHOT</version> <scope>provided</scope></dependency><dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.nosql</artifactId> <version>2.4.0-SNAPSHOT</version></dependency><dependency> <groupId>org.mongodb</groupId> <artifactId>mongo-java-driver</artifactId> <version>2.7.3</version></dependency> The first one is for the EclipseLink latest APIs, the second one is for EclipseLink/NoSQL support, and the last one is the MongoDB Java driver. And the following repository: <repositories> <repository> <id>EclipseLink Repo</id> <url>http://www.eclipse.org/downloads/download.php?r=1&nf=1&file=/rt/eclipselink/maven.repo</url> <snapshots> <enabled>true</enabled> </snapshots> </repository> </repositories> Copy the "Test.java" to the generated project: mkdir src/main/java/examplecp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/example/Test.java ./src/main/java/example/ This file contains the source code to CRUD the JPA entity to MongoDB. This sample is explained in detail on EclipseLink wiki. Create a new Servlet in "example" directory as: package example;import java.io.IOException;import java.io.PrintWriter;import javax.servlet.ServletException;import javax.servlet.annotation.WebServlet;import javax.servlet.http.HttpServlet;import javax.servlet.http.HttpServletRequest;import javax.servlet.http.HttpServletResponse;/** * @author Arun Gupta */@WebServlet(name = "TestServlet", urlPatterns = {"/TestServlet"})public class TestServlet extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=UTF-8"); PrintWriter out = response.getWriter(); try { out.println("<html>"); out.println("<head>"); out.println("<title>Servlet TestServlet</title>"); out.println("</head>"); out.println("<body>"); out.println("<h1>Servlet TestServlet at " + request.getContextPath() + "</h1>"); try { Test.main(null); } catch (Exception ex) { ex.printStackTrace(); } out.println("</body>"); out.println("</html>"); } finally { out.close(); } } @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); }} Build the project and deploy it as: mvn clean packageglassfish3/bin/asadmin deploy --force=true target/javaee-nosql-1.0-SNAPSHOT.war Accessing http://localhost:8080/javaee-nosql/TestServlet shows the following messages in the server.log: connecting(EISLogin( platform=> MongoPlatform user name=> "" MongoConnectionSpec())) . . .Connected: User: Database: 2.7 Version: 2.7 . . .Executing MappedInteraction() spec => null properties => {mongo.collection=CUSTOMER, mongo.operation=INSERT} input => [DatabaseRecord( CUSTOMER._id => 4F848E2BDA0670307E2A8FA4 CUSTOMER.NAME => AMCE)]. . .Data access result: [{TOTALCOST=757.0, ORDERLINES=[{DESCRIPTION=table, LINENUMBER=1, COST=300.0}, {DESCRIPTION=balls, LINENUMBER=2, COST=5.0}, {DESCRIPTION=rackets, LINENUMBER=3, COST=15.0}, {DESCRIPTION=net, LINENUMBER=4, COST=2.0}, {DESCRIPTION=shipping, LINENUMBER=5, COST=80.0}, {DESCRIPTION=handling, LINENUMBER=6, COST=55.0},{DESCRIPTION=tax, LINENUMBER=7, COST=300.0}], SHIPPINGADDRESS=[{POSTALCODE=L5J1H7, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa,STREET=17 Jane St.}], VERSION=2, _id=4F848E2BDA0670307E2A8FA8,DESCRIPTION=Pingpong table, CUSTOMER__id=4F848E2BDA0670307E2A8FA7, BILLINGADDRESS=[{POSTALCODE=L5J1H8, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa, STREET=7 Bank St.}]}] You'll not see any output in the browser, just the output in the console. But the code can be easily modified to do so. Once again, the complete Maven project can be downloaded here. Do you want to try accessing relational and non-relational (aka NoSQL) databases in the same PU ?

Read the article

Creating a podcast feed for iTunes & BlackBerry users using WCF Syndication

- by brian_ritchie

In my previous post, I showed how to create a RSS feed using WCF Syndication. Next, I'll show how to add the additional tags needed to turn a RSS feed into an iTunes podcast. A podcast is merely a RSS feed with some special characteristics: iTunes RSS tags. These are additional tags beyond the standard RSS spec. Apple has a good page on the requirements. Audio file enclosure. This is a link to the audio file (such as mp3) hosted by your site. Apple doesn't host the audio, they just read the meta-data from the RSS feed into their system. The SyndicationFeed class supports both AttributeExtensions & ElementExtensions to add custom tags to the RSS feeds. A couple of points of interest in the code below: The imageUrl below provides the album cover for iTunes (170px × 170px) Each SyndicationItem corresponds to an audio episode in your podcast So, here's the code: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: XNamespace itunesNS = "http://www.itunes.com/dtds/podcast-1.0.dtd"; 2: string prefix = "itunes"; 3: 4: var feed = new SyndicationFeed(title, description, new Uri(link)); 5: feed.Categories.Add(new SyndicationCategory(category)); 6: feed.AttributeExtensions.Add(new XmlQualifiedName(prefix, 7: "http://www.w3.org/2000/xmlns/"), itunesNS.NamespaceName); 8: feed.Copyright = new TextSyndicationContent(copyright); 9: feed.Language = "en-us"; 10: feed.Copyright = new TextSyndicationContent(DateTime.Now.Year + " " + ownerName); 11: feed.ImageUrl = new Uri(imageUrl); 12: feed.LastUpdatedTime = DateTime.Now; 13: feed.Authors.Add(new SyndicationPerson() {Name=ownerName, Email=ownerEmail }); 14: var extensions = feed.ElementExtensions; 15: extensions.Add(new XElement(itunesNS + "subtitle", subTitle).CreateReader()); 16: extensions.Add(new XElement(itunesNS + "image", 17: new XAttribute("href", imageUrl)).CreateReader()); 18: extensions.Add(new XElement(itunesNS + "author", ownerName).CreateReader()); 19: extensions.Add(new XElement(itunesNS + "summary", description).CreateReader()); 20: extensions.Add(new XElement(itunesNS + "category", 21: new XAttribute("text", category), 22: new XElement(itunesNS + "category", 23: new XAttribute("text", subCategory))).CreateReader()); 24: extensions.Add(new XElement(itunesNS + "explicit", "no").CreateReader()); 25: extensions.Add(new XDocument( 26: new XElement(itunesNS + "owner", 27: new XElement(itunesNS + "name", ownerName), 28: new XElement(itunesNS + "email", ownerEmail))).CreateReader()); 29: 30: var feedItems = new List<SyndicationItem>(); 31: foreach (var i in Items) 32: { 33: var item = new SyndicationItem(i.title, null, new Uri(link)); 34: item.Summary = new TextSyndicationContent(i.summary); 35: item.Id = i.id; 36: if (i.publishedDate != null) 37: item.PublishDate = (DateTimeOffset)i.publishedDate; 38: item.Links.Add(new SyndicationLink() { 39: Title = i.title, Uri = new Uri(link), 40: Length = i.size, MediaType = i.mediaType }); 41: var itemExt = item.ElementExtensions; 42: itemExt.Add(new XElement(itunesNS + "subtitle", i.subTitle).CreateReader()); 43: itemExt.Add(new XElement(itunesNS + "summary", i.summary).CreateReader()); 44: itemExt.Add(new XElement(itunesNS + "duration", 45: string.Format("{0}:{1:00}:{2:00}", 46: i.duration.Hours, i.duration.Minutes, i.duration.Seconds) 47: ).CreateReader()); 48: itemExt.Add(new XElement(itunesNS + "keywords", i.keywords).CreateReader()); 49: itemExt.Add(new XElement(itunesNS + "explicit", "no").CreateReader()); 50: itemExt.Add(new XElement("enclosure", new XAttribute("url", i.url), 51: new XAttribute("length", i.size), new XAttribute("type", i.mediaType))); 52: feedItems.Add(item); 53: } 54: 55: feed.Items = feedItems; If you're hosting your podcast feed within a MVC project, you can use the code from my previous post to stream it. Once you have created your feed, you can use the Feed Validator tool to make sure it is up to spec. Or you can use iTunes: Launch iTunes. In the Advanced menu, select Subscribe to Podcast. Enter your feed URL in the text box and click OK. After you've verified your feed is solid & good to go, you can submit it to iTunes. Launch iTunes. In the left navigation column, click on iTunes Store to open the store. Once the store loads, click on Podcasts along the top navigation bar to go to the Podcasts page. In the right column of the Podcasts page, click on the Submit a Podcast link. Follow the instructions on the Submit a Podcast page. Here are the full instructions. Once they have approved your podcast, it will be available within iTunes. RIM has also gotten into the podcasting business...which is great for BlackBerry users. They accept the same enhanced-RSS feed that iTunes uses, so just create an account with them & submit the feed's URL. It goes through a similar approval process to iTunes. BlackBerry users must be on BlackBerry 6 OS or download the Podcast App from App World. In my next post, I'll show how to build the podcast feed dynamically from the ID3 tags within the MP3 files.

Read the article

Using JDialog with Tabbed Pane to draw different pictures [migrated]

- by Bryam Ulloa

I am using NetBeans, and I have a class that extends to JDialog, inside that Dialog box I have created a Tabbed Pane. The Tabbed Pane contains 6 different tabs, with 6 different panels of course. What I want to do is when I click on the different tabs, a diagram is supposed to be drawn with the paint method. My question is how can I draw on the different panels with just one paint method in another class being called from the Dialog class? Here is my code for the Dialog class: package GUI; public class NewJDialog extends javax.swing.JDialog{ /** * Creates new form NewJDialog */ public NewJDialog(java.awt.Frame parent, boolean modal) { super(parent, modal); initComponents(); } /** * This method is called from within the constructor to initialize the form. * WARNING: Do NOT modify this code. The content of this method is always * regenerated by the Form Editor. */ @SuppressWarnings("unchecked") // <editor-fold defaultstate="collapsed" desc="Generated Code"> private void initComponents() { jTabbedPane1 = new javax.swing.JTabbedPane(); jPanel1 = new javax.swing.JPanel(); jPanel2 = new javax.swing.JPanel(); jPanel3 = new javax.swing.JPanel(); jPanel4 = new javax.swing.JPanel(); jPanel5 = new javax.swing.JPanel(); jPanel6 = new javax.swing.JPanel(); jPanel7 = new javax.swing.JPanel(); jLabel1 = new javax.swing.JLabel(); jLabel2 = new javax.swing.JLabel(); setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE); javax.swing.GroupLayout jPanel1Layout = new javax.swing.GroupLayout(jPanel1); jPanel1.setLayout(jPanel1Layout); jPanel1Layout.setHorizontalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 466, Short.MAX_VALUE) ); jPanel1Layout.setVerticalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 242, Short.MAX_VALUE) ); jTabbedPane1.addTab("FCFS", jPanel1); javax.swing.GroupLayout jPanel2Layout = new javax.swing.GroupLayout(jPanel2); jPanel2.setLayout(jPanel2Layout); jPanel2Layout.setHorizontalGroup( jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 466, Short.MAX_VALUE) ); jPanel2Layout.setVerticalGroup( jPanel2Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 242, Short.MAX_VALUE) ); jTabbedPane1.addTab("SSTF", jPanel2); javax.swing.GroupLayout jPanel3Layout = new javax.swing.GroupLayout(jPanel3); jPanel3.setLayout(jPanel3Layout); jPanel3Layout.setHorizontalGroup( jPanel3Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 466, Short.MAX_VALUE) ); jPanel3Layout.setVerticalGroup( jPanel3Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 242, Short.MAX_VALUE) ); jTabbedPane1.addTab("LOOK", jPanel3); javax.swing.GroupLayout jPanel4Layout = new javax.swing.GroupLayout(jPanel4); jPanel4.setLayout(jPanel4Layout); jPanel4Layout.setHorizontalGroup( jPanel4Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 466, Short.MAX_VALUE) ); jPanel4Layout.setVerticalGroup( jPanel4Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 242, Short.MAX_VALUE) ); jTabbedPane1.addTab("LOOK C", jPanel4); javax.swing.GroupLayout jPanel5Layout = new javax.swing.GroupLayout(jPanel5); jPanel5.setLayout(jPanel5Layout); jPanel5Layout.setHorizontalGroup( jPanel5Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 466, Short.MAX_VALUE) ); jPanel5Layout.setVerticalGroup( jPanel5Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 242, Short.MAX_VALUE) ); jTabbedPane1.addTab("SCAN", jPanel5); javax.swing.GroupLayout jPanel6Layout = new javax.swing.GroupLayout(jPanel6); jPanel6.setLayout(jPanel6Layout); jPanel6Layout.setHorizontalGroup( jPanel6Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 466, Short.MAX_VALUE) ); jPanel6Layout.setVerticalGroup( jPanel6Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 242, Short.MAX_VALUE) ); jTabbedPane1.addTab("SCAN C", jPanel6); getContentPane().add(jTabbedPane1, java.awt.BorderLayout.CENTER); jLabel1.setText("Distancia:"); jLabel2.setText("___________"); javax.swing.GroupLayout jPanel7Layout = new javax.swing.GroupLayout(jPanel7); jPanel7.setLayout(jPanel7Layout); jPanel7Layout.setHorizontalGroup( jPanel7Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(jPanel7Layout.createSequentialGroup() .addGap(21, 21, 21) .addComponent(jLabel1) .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED) .addComponent(jLabel2) .addContainerGap(331, Short.MAX_VALUE)) ); jPanel7Layout.setVerticalGroup( jPanel7Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(jPanel7Layout.createSequentialGroup() .addContainerGap() .addGroup(jPanel7Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(jLabel1) .addComponent(jLabel2)) .addContainerGap(15, Short.MAX_VALUE)) ); getContentPane().add(jPanel7, java.awt.BorderLayout.PAGE_START); pack(); }// </editor-fold> /** * @param args the command line arguments */ public static void main(String args[]) { /* Set the Nimbus look and feel */ //<editor-fold defaultstate="collapsed" desc=" Look and feel setting code (optional) "> /* If Nimbus (introduced in Java SE 6) is not available, stay with the default look and feel. * For details see http://download.oracle.com/javase/tutorial/uiswing/lookandfeel/plaf.html */ try { for (javax.swing.UIManager.LookAndFeelInfo info : javax.swing.UIManager.getInstalledLookAndFeels()) { if ("Nimbus".equals(info.getName())) { javax.swing.UIManager.setLookAndFeel(info.getClassName()); break; } } } catch (ClassNotFoundException ex) { java.util.logging.Logger.getLogger(NewJDialog.class.getName()).log(java.util.logging.Level.SEVERE, null, ex); } catch (InstantiationException ex) { java.util.logging.Logger.getLogger(NewJDialog.class.getName()).log(java.util.logging.Level.SEVERE, null, ex); } catch (IllegalAccessException ex) { java.util.logging.Logger.getLogger(NewJDialog.class.getName()).log(java.util.logging.Level.SEVERE, null, ex); } catch (javax.swing.UnsupportedLookAndFeelException ex) { java.util.logging.Logger.getLogger(NewJDialog.class.getName()).log(java.util.logging.Level.SEVERE, null, ex); } //</editor-fold> /* Create and display the dialog */ java.awt.EventQueue.invokeLater(new Runnable() { public void run() { NewJDialog dialog = new NewJDialog(new javax.swing.JFrame(), true); dialog.addWindowListener(new java.awt.event.WindowAdapter() { @Override public void windowClosing(java.awt.event.WindowEvent e) { System.exit(0); } }); dialog.setVisible(true); } }); } // Variables declaration - do not modify private javax.swing.JLabel jLabel1; private javax.swing.JLabel jLabel2; private javax.swing.JPanel jPanel1; private javax.swing.JPanel jPanel2; private javax.swing.JPanel jPanel3; private javax.swing.JPanel jPanel4; private javax.swing.JPanel jPanel5; private javax.swing.JPanel jPanel6; private javax.swing.JPanel jPanel7; private javax.swing.JTabbedPane jTabbedPane1; // End of variables declaration } This is another class that I have created for the paint method: package GUI; import java.awt.Graphics; import javax.swing.JPanel; /** * * @author TOSHIBA */ public class Lienzo { private int width = 5; private int height = 5; private int y = 5; private int x = 0; private int x1 = 0; public Graphics Draw(Graphics g, int[] pistas) { //Im not sure if this is the correct way to do it //The diagram gets drawn according to values from an array //The array is not always the same thats why I used the different Panels for (int i = 0; i < pistas.length; i++) { x = pistas[i]; x1 = pistas[i + 1]; g.drawOval(x, y, width, height); g.drawString(Integer.toString(x), x, y); g.drawLine(x, y, x1, y); } return g; } } I hope you guys understand what I am trying to do with my program.

Read the article

Hard drive mounted at / , duplicate mounted hard drive after using MountManager

- by HellHarvest

possible duplicate post I'm running 12.04 64bit. My system is a dual boot for both Ubuntu and Windows7. Both operating systems are sharing the drive named "Elements". My volume named "Elements" is a 1TB SATA NTFS hard drive that shows up twice in the side bar in nautilus. One of the icons is functional and even has the convenient "eject" icon next to it. Below is a picture of the left menu in Nautilus, with System Monitor-File Systems tab open on top of it. Can someone advise me about how to get rid of this extra icon? I think the problem is much more deep-rooted than just a GUI glitch on Nautilus' part. The other icon does nothing but spit out the following error when I click on it (image below). This only happened AFTER I tried using Mount Manager to automate mounting the drive at start up. I've already uninstalled Mount Manager, and restarted, but the problem didn't go away. The hard drive does mount automatically now, so I guess that's cool. But now, every time I boot up now and open Nautilus, BOTH of these icons appear, one of which is fictitious and useless. According to the image above and the outputs of several other commands, it appears to be mounted at / In which case, no matter where I am in Nautilus when I try to click on that icon, of course it will tell me that that drive is in use by another program... Nautilus. I'm afraid of trying to unmount this hard drive (sdb6) because of where it appears to be mounted. I'm kind of a noob, and I have this gut feeling that tells me trying to unmount a drive at / will destroy my entire file system. This fear was further strengthened by the output of "$ fsck" at the very bottom of this post. Error immediately below when that 2nd "Elements" hard drive is clicked in Nautilus: Unable to mount Elements Mount is denied because the NTFS volume is already exclusively opened. The volume may be already mounted, or another software may use it which could be identified for example by the help of the 'fuser' command. It's odd to me that that error message above claims that it's an NTFS volume when everything else tell me that it's an ext4 volume. The actual hard drive "Elements" is in fact an NTFS volume. Here's the output of a few commands and configuration files that may be of interest: $ fuser -a / /: 2120r 2159rc 2160rc 2172r 2178rc 2180rc 2188r 2191rc 2200rc 2203rc 2205rc 2206r 2211r 2212r 2214r 2220r 2228r 2234rc 2246rc 2249rc 2254rc 2260rc 2261r 2262r 2277rc 2287rc 2291rc 2311rc 2313rc 2332rc 2334rc 2339rc 2343rc 2344rc 2352rc 2372rc 2389rc 2422r 2490r 2496rc 2501rc 2566r 2573rc 2581rc 2589rc 2592r 2603r 2611rc 2613rc 2615rc 2678rc 2927r 2981r 3104rc 4156rc 4196rc 4206rc 4213rc 4240rc 4297rc 5032rc 7609r 7613r 7648r 9593rc 18829r 18833r 19776r $ sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb6 496G 366G 106G 78% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 791M 1.5M 790M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 672K 2.0G 1% /run/shm /dev/sda1 932G 312G 620G 34% /media/Elements /home/solderblob/.Private 496G 366G 106G 78% /home/solderblob /dev/sdb2 188G 100G 88G 54% /media/A2B24EACB24E852F /dev/sdb1 100M 25M 76M 25% /media/System Reserved $ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00093cab Device Boot Start End Blocks Id System /dev/sda1 2048 1953519615 976758784 7 HPFS/NTFS/exFAT Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d9b Device Boot Start End Blocks Id System /dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sdb2 206848 392378768 196085960+ 7 HPFS/NTFS/exFAT /dev/sdb3 392380414 1465147391 536383489 5 Extended /dev/sdb5 1456762880 1465147391 4192256 82 Linux swap / Solaris /dev/sdb6 392380416 1448374271 527996928 83 Linux /dev/sdb7 1448376320 1456758783 4191232 82 Linux swap / Solaris Partition table entries are not in disk order $ cat /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> UUID=77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 defaults 0 1 UUID=F6549CC4549C88CF /media/Elements ntfs-3g users 0 0 $ sudo blkid /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ sudo blkid -c /dev/null (appears to be exactly the same as above) /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ mount /dev/sdb6 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /media/Elements type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /home/solderblob/.Private on /home/solderblob type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=76a47b0175afa48d,ecryptfs_fnek_sig=391b2d8b155215f7) gvfs-fuse-daemon on /home/solderblob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=solderblob) /dev/sdb2 on /media/A2B24EACB24E852F type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) /dev/sdb1 on /media/System Reserved type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) $ ls -a . A2B24EACB24E852F Ubuntu 12.04.1 LTS amd64 .. Elements System Reserved $ cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=2013000k,nr_inodes=503250,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=809872k,mode=755 0 0 /dev/disk/by-uuid/77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 /dev/sda1 /media/Elements fuseblk rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 /home/solderblob/.Private /home/solderblob ecryptfs rw,relatime,ecryptfs_fnek_sig=391b2d8b155215f7,ecryptfs_sig=76a47b0175afa48d,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs 0 0 gvfs-fuse-daemon /home/solderblob/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/sdb2 /media/A2B24EACB24E852F fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sdb1 /media/System\040Reserved fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0 $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) /dev/sdb6 is mounted. WARNING!!! The filesystem is mounted. If you continue you ***WILL*** cause ***SEVERE*** filesystem damage. Do you really want to continue<n>? no check aborted.

Search Results

Search found 133312 results on 5333 pages for 'using'.

Page 65/5333 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72 | Next Page >

- by wim.coekaerts

- by BuckWoody

- by user1106405

- by Dylan Smith

- by tengen

- by Jakob Ehn

- by brian_ritchie

- by nikolaosk

- by Flack

- by rajbk

- by Mike Sawayda

- by nmarun

- by Bobby Diaz

- by rajbk

- by DigiMortal

- by Trevor Bekolay

- by dmitry.nefedkin(at)oracle.com

- by jamiet

- by hajan

- by ThundLayr

- by arungupta

- by brian_ritchie

- by Bryam Ulloa

- by HellHarvest

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72 | Next Page >