Search Results

Search found 17336 results on 694 pages for 'developer events'.

Page 651/694 | < Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658 | Next Page >

Complex SQL query with group by and two rows in one

- by Ricket

Okay, I need help. I'm usually pretty good at SQL queries but this one baffles me. By the way, this is not a homework assignment, it's a real situation in an Access database and I've written the requirements below myself. Here is my table layout. It's in Access 2007 if that matters; I'm writing the query using SQL. Id (primary key) PersonID (foreign key) EventDate NumberOfCredits SuperCredits (boolean) There are events that people go to. They can earn normal credits, or super credits, or both at one event. The SuperCredits column is true if the row represents a number of super credits earned at the event, or false if it represents normal credits. So for example, if there is an event which person 174 attends, and they earn 3 normal credits and 1 super credit at the event, the following two rows would be added to the table: ID PersonID EventDate NumberOfCredits SuperCredits 1 174 1/1/2010 3 false 2 174 1/1/2010 1 true It is also possible that the person could have done two separate things at the event, so there might be more than two columns for one event, and it might look like this: ID PersonID EventDate NumberOfCredits SuperCredits 1 174 1/1/2010 1 false 2 174 1/1/2010 2 false 3 174 1/1/2010 1 true Now we want to print out a report. Here will be the columns of the report: PersonID LastEventDate NumberOfNormalCredits NumberOfSuperCredits The report will have one row per person. The row will show the latest event that the person attended, and the normal and super credits that the person earned at that event. What I am asking of you is to write, or help me write, the SQL query to SELECT the data and GROUP BY and SUM() and whatnot. Or, let me know if this is for some reason not possible, and how to organize my data to make it possible. This is extremely confusing and I understand if you do not take the time to puzzle through it. I've tried to simplify it as much as possible, but definitely ask any questions if you give it a shot and need clarification. I'll be trying to figure it out but I'm having a real hard time with it, this is grouping beyond my experience...

Read the article
Loading a SWF dynamically causes previously loaded SWFs to misbehave

- by Aaron

I have run into a very strange problem with Flash and Flex. It appears that under certain circumstances, movie clips from a SWF loaded at runtime (using Loader) cannot be instantiated if another SWF has been loaded in the mean time. Here is the complete code for a program that reproduces the error. It is compiled using mxmlc, via Ensemble Tofino: package { import flash.display.*; import flash.events.*; import flash.net.*; import flash.system.*; public class DynamicLoading extends Sprite { private var testAppDomain:ApplicationDomain; public function DynamicLoading() { var request:URLRequest = new URLRequest("http://localhost/content/test.swf"); var loader:Loader = new Loader(); loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onTestLoadComplete); loader.load(request); } private function onTestLoadComplete(e:Event):void { var loaderInfo:LoaderInfo = LoaderInfo(e.target); testAppDomain = loaderInfo.applicationDomain; // To get the error, uncomment these lines... //var request:URLRequest = new URLRequest("http://localhost/content/tiny.swf"); //var loader:Loader = new Loader(); //loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onTinyLoadComplete); //loader.load(request); // ...and comment this one: onTinyLoadComplete(); } private function onTinyLoadComplete(e:Event = null):void { var spriteClass:Class = Class(testAppDomain.getDefinition("TopSymbol")); var sprite:Sprite = Sprite(new spriteClass()); sprite.x = sprite.y = 200; addChild(sprite); } } } With the second loading operation commented out as shown above, the code works. However, if the second loading operation is uncommented and onTinyLoadComplete runs after the second SWF is loaded, the line containing new spriteClass() fails with the following exception: TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@2dc8ba1 to SubSymbol. at flash.display::Sprite/constructChildren() at flash.display::Sprite() at flash.display::MovieClip() at TopSymbol() at DynamicLoading/onTinyLoadComplete()[C:\Users\...\TestFlash\DynamicLoading.as:38] test.swf and tiny.swf were created in Flash CS4. test.swf contains two symbols, both exported for ActionScript, one called TopSymbol and one called SubSymbol. SubSymbol contains a simple graphic (a scribble) and TopSymbol contains a single instance of SubSymbol. tiny.swf contains nothing; it is the result of publishing a new, empty ActionScript 3 project. If I modify test.swf so that SubSymbol is not exported for ActionScript, the error goes away, but in our real project we need the ability to dynamically load sprite classes that contain other, exported sprite classes as children. Any ideas as to what is causing this, or how to fix it?

Read the article
Error in playing a swf file on internet explorer

- by Rajeev

In the below code i get an error saying Error #2007: Parameter url must be non-null on Ineternet explorer only.What am i doing wrong here html <OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" WIDTH="50" HEIGHT="50" id="myMovieName"> <PARAM NAME="movie" VALUE="/media/players/testsound.swf" /> <PARAM NAME="quality" VALUE="high" /> <PARAM NAME="bgcolor" VALUE="#FFFFFF" /> <EMBED href="/media/players/testsound.swf" src="/media/players/testsound.swf" flashvars="soundUrl=sound.mp3" quality=high bgcolor=#FFFFFF NAME="myMovieName" ALIGN="" TYPE="application/x-shockwave-flash"> </EMBED> </OBJECT> mxml ; import flash.net.; import mx.controls.Alert; import mx.controls.Button; import flash.events.Event; import flash.media.Sound; import flash.net.URLRequest; private function clickhandler(event:Event):void { var musicfile:String; var s:Sound = new Sound(); s.addEventListener(Event.COMPLETE, onSoundLoaded); var req:URLRequest = new URLRequest("/opt/cloodon/site/media/players/sound.mp3"); //musicfile = stage.loaderInfo.parameters["soundUrl"]; //var req:URLRequest = new URLRequest(musicfile); s.load(req); } private function onSoundLoaded(event:Event):void { //Alert.show("1"); //var localSound:Sound = event.currentTarget as Sound; var localSound:Sound = event.target as Sound; localSound.play(); } ]]> </fx:Script> <fx:Declarations>  </fx:Declarations>  <mx:Image id="loader1" source="@Embed(source='/opt/cloodon/site/media/img/speaker.gif')" click="clickhandler(event)" /> </s:Application>

Read the article
Gamepad Control for Processing + Android to Control Arduino Robot

- by Iker

I would like to create a Multitouch Gamepad control for Processing and use it to control a remote Arduino Robot. I would like to make the GUI on Processing and compile it for Android. Here is the GUI Gamepad for Processing I have created so far: float easing = 0.09; // start position int posX = 50; int posY = 200; // target position int targetX = 50; int targetY = 200; boolean dragging = false; void setup() { size(500,250); smooth(); } void draw() { background(255); if (!dragging) { // calculate the difference in position, apply easing and add to vx/vy float vx = (targetX - (posX)) * easing; float vy = (targetY - (posY)) * easing; // Add the velocity to the current position: make it move! posX += vx; posY += vy; } if(mousePressed) { dragging = true; posX = mouseX; posY = mouseY; } else { dragging = false; } DrawGamepad(); DrawButtons(); } void DrawGamepad() { //fill(0,155,155); //rect(0, 150, 100, 100, 15); ellipseMode(RADIUS); // Set ellipseMode to RADIUS fill(0,155,155); // Set fill to blue ellipse(50, 200, 50, 50); // Draw white ellipse using RADIUS mode ellipseMode(CENTER); // Set ellipseMode to CENTER fill(255); // Set fill to white// ellipse(posX, posY, 35, 35); // Draw gray ellipse using CENTER mode } void DrawButtons() { fill(0,155,155); // Set fill to blue ellipse(425, 225, 35, 35); ellipse(475, 225, 35, 35); fill(255,0,0); // Set fill to blue ellipse(425, 175, 35, 35); ellipse(475, 175, 35, 35); } I have realized that probably that code will not support Multitouch events on Android so I came up with another code found on this link Can Processing handle multi-touch? So the aim of this project is to create de multitouch gamepad to use to control my Arduino Robot. The gamepad should detect which key was pressed as well as the direction of the Joystick. Any help appreciated.

Read the article
Rails 3 - development errors in production mode

- by skrafi

Im using Rails, Passenger (both are 3.0.5) and Nginx on my production server. As I heard, Rails should show public/404.html or public/500.html instead of development errors like ActiveRecord::RecordNotFound or Unknown action but that doesn't happen. I've tried to delete config.ru file and set rack_env or rails_env in nginx.conf but nothing helped. Here is my nginx.conf: worker_processes 1; events { worker_connections 1024; } http { passenger_root /home/makk/.rvm/gems/ruby-1.9.2-p0/gems/passenger-3.0.5; passenger_ruby /home/makk/.rvm/bin/passenger_ruby; #passenger_ruby /home/makk/.rvm/wrappers/ruby-1.9.2-p0/ruby; include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; server_name localhost; location / { root /home/makk/projects/1server/deploy/current/public; index index.html index.htm; passenger_enabled on; rack_env production; recursive_error_pages on; if (-f /home/makk/projects/1server/maintenance.html) { return 503; } error_page 404 /404.html; error_page 500 502 504 /500.html; error_page 503 @503; } location @503 { error_page 405 = /maintenance.html; # Serve static assets if found. if (-f $request_filename) { break; } rewrite ^(.*)$ /maintenance.html break; } location ~ ^(\/phpmyadmin\/)(.*)$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_split_path_info ^(\/phpmyadmin\/)(.*)$; fastcgi_param SCRIPT_FILENAME /usr/share/phpmyadmin/$fastcgi_path_info; include fastcgi_params; } } } It seems that this question duplicates this one but there are no working suggestions. UPD: I have both development and production apps on same PC. In production Rails ignores config.consider_all_requests_local = false (in /config/environments/production.rb) due to local_request? method. So one of possible solutions is listed below (taken from here): # config/initializers/local_request_override.rb module CustomRescue def local_request? return false if Rails.env.production? || Rails.env.staging? super end end ActionController::Base.class_eval do include CustomRescue end Or for Rails 3: class ActionDispatch::Request def local? false end end

Read the article
How to maxmise the largest contiguous block of memory in the Large Object Heap

- by Unsliced

The situation is that I am making a WCF call to a remote server which is returns an XML document as a string. Most of the time this return value is a few K, sometimes a few dozen K, very occasionally a few hundred K, but very rarely it could be several megabytes (first problem is that there is no way for me to know). It's these rare occasions that are causing grief. I get a stack trace that starts: System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown. at System.Xml.BufferBuilder.AddBuffer() at System.Xml.BufferBuilder.AppendHelper(Char* pSource, Int32 count) at System.Xml.BufferBuilder.Append(Char[] value, Int32 start, Int32 count) at System.Xml.XmlTextReaderImpl.ParseText() at System.Xml.XmlTextReaderImpl.ParseElementContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlTextReader.Read() at System.Xml.XmlReader.ReadElementString() at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderMDRQuery.Read2_getMarketDataResponse() at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer2.Deserialize(XmlSerializationReader reader) at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events) at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle) at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) I've read around and it is because the Large Object Heap is just getting too fragmented, so even preceding the call with a quick check to StringBuilder.EnsureCapacity just causes the OutOfMemoryException to be thrown earlier (and because I'm guessing at what's needed, it might not actually need that much so my check is causing more problems than it is solving). Some opinions are that there's not much I can do about it. Some of the questions I've asked myself: Use less memory - have you checked for leaks? Yes. The memory usage goes up and down, but there's no fundamental growth that guarantees this to happen. Some of the times it fails, it succeeded at that stage previously. Transfer smaller amounts Not an option, this is a third party web service over which I have no control (or at least it would take a long time to resolve, in the meantime I still have a problem) Can you do something to the LOH to make it less likely to fail? ... now this is most fruitful course. It's a 32-bit process (it has to be for various political, technical and boring reasons) but there's normally hundreds of meg free (multiples of the largest amount for which we've seen failures). Can we monitor the LOH? Using perfmon I can track the size of the heaps, but I don't think there's a way to monitor the largest available contiguous block of memory. Question is: any advice or suggestions for things to try?

Read the article
problem in adding image to JFrame

- by firestruq

Hi, I'm having problems in adding a picture into JFrame, something is missing probebly or written wrong. here are the classes: main class: public class Tester { public static void main(String args[]) { BorderLayoutFrame borderLayoutFrame = new BorderLayoutFrame(); borderLayoutFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); borderLayoutFrame.setSize(600,600); borderLayoutFrame.setVisible(true); } } public class BorderLayoutFrame extends JFrame implements ActionListener { private JButton buttons[]; // array of buttons to hide portions private final String names[] = { "North", "South", "East", "West", "Center" }; private BorderLayout layout; // borderlayout object private PicPanel picture = new PicPanel(); // set up GUI and event handling public BorderLayoutFrame() { super( "Philosofic Problem" ); layout = new BorderLayout( 5, 5 ); // 5 pixel gaps setLayout( layout ); // set frame layout buttons = new JButton[ names.length ]; // set size of array // create JButtons and register listeners for them for ( int count = 0; count < names.length; count++ ) { buttons[ count ] = new JButton( names[ count ] ); buttons[ count ].addActionListener( this ); } add( buttons[ 0 ], BorderLayout.NORTH ); // add button to north add( buttons[ 1 ], BorderLayout.SOUTH ); // add button to south add( buttons[ 2 ], BorderLayout.EAST ); // add button to east add( buttons[ 3 ], BorderLayout.WEST ); // add button to west add( picture, BorderLayout.CENTER ); // add button to center } // handle button events public void actionPerformed( ActionEvent event ) { } } I'v tried to add the image into the center of layout. here is the image class: public class PicPanel extends JPanel { Image img; private int width = 0; private int height = 0; public PicPanel() { super(); img = Toolkit.getDefaultToolkit().getImage("table.jpg"); } public void paintComponent(Graphics g) { super.paintComponents(g); if ((width <= 0) || (height <= 0)) { width = img.getWidth(this); height = img.getHeight(this); } g.drawImage(img,0,0,width,height,this); } } Please your help, what is the problem? thanks BTW: i'm using eclipse, which directory the image suppose to be in?

Read the article
DCVS + hosting for a startup commercial multiplatform phone app

- by AG

I'm in lean startup mode, working on a simple phone app that will be published initially as a iThingy app and an Android app with, possibly, Blackberry and Symbian versions to follow. I'm about to go from no repository to needing a central repository that up to 4 very part-time resources will be sharing. Two of us have no version control background, one has used Subversion, and I've used most of the major centralized VCS systems. I'm not going to be pushing the technical limitations of any VCS for a long time; I'm sure that any of the major systems would work fine. And the hosting accounts I've looked at seem reasonable. So I'm really focussed on minimizing the downside risks. That is, I'd like to find a stable setup that is easy to learn in general, easy to use from Windows/Eclipse, and won't paint me into any obvious corners for the next 12 months or so. A quick search of the web had led me to consider the following pairs of DVCS and hosting service, with what I think I'm hearing as their strengths and weaknesses (for my purposes): Bazaar/Launchpad -- My initial choice since I need to get more familiar with this pair for the Google Summer of Code mentoring I'm doing. But, whatever the technical merits, a non-starter for me because they are purely open source, no private repositories plans to purchase that I can see. Git/GitHub -- Git: Fast, light, ultimately flexible, but relatively less Windows friendly, Eclipse plugin (eGit) available but relatively young, GitHub: widely used, pricing is fine Mercurial/BitBucket -- Mercurial: a little less flexible, a little more Windows friendly, Eclipse plugin seems a bit more mature, BitBucket: widely used, pricing is fine, includes a wiki and an issue tracker that we might be able to use instead of something like BaseCamp, at least for a while. Mercurial/BitBucket seem like the winning pair so far for my particular situation; at least two of us are definitely going to be working mostly from Eclipse on Windows and reducing my own learning curve is a priority. ;-) But I have two specific questions: 1) Am I wrong about Bazaar/Launchpad and is there a viable, secure way to use them for proprietary code? 2) Any reason to think that the Mecurial/Bitbucket pair will end up being a headache for my Mac developer, soon, or for Blackberry or Symbian developers a little later? ag

Read the article
Escaping Code for Different Shells

- by Jon Purdy

Question: What characters do I need to escape in a user-entered string to securely pass it into shells on Windows and Unix? What shell differences and version differences should be taken into account? Can I use printf "%q" somehow, and is that reliable across shells? Backstory (a.k.a. Shameless Self-Promotion): I made a little DSL, the Vision Web Template Language, which allows the user to create templates for X(HT)ML documents and fragments, then automatically fill them in with content. It's designed to separate template logic from dynamic content generation, in the same way that CSS is used to separate markup from presentation. In order to generate dynamic content, a Vision script must defer to a program written in a language that can handle the generation logic, such as Perl or Python. (Aside: using PHP is also possible, but Vision is intended to solve some of the very problems that PHP perpetuates.) In order to do this, the script makes use of the @system directive, which executes a shell command and expands to its output. (Platform-specific generation can be handled using @unix or @windows, which only expand on the proper platform.) The problem is obvious, I should think: test.htm:  <form action="login.vis" method="POST"> <input type="text" name="USERNAME"/> <input type="password" name="PASSWORD"/> </form>  login.vis: #!/usr/bin/vision # Think USERNAME = ";rm -f;" @system './login.pl' { USERNAME; PASSWORD } One way to safeguard against this kind of attack is to set proper permissions on scripts and directories, but Web developers may not always set things up correctly, and the naive developer should get just as much security as the experienced one. The solution, logically, is to include a @quote directive that produces a properly escaped string for the current platform. @system './login.pl' { @quote : USERNAME; @quote : PASSWORD } But what should @quote actually do? It needs to be both cross-platform and secure, and I don't want to create terrible problems with a naive implementation. Any thoughts?

Read the article
How are DX and DY coordinates calculated in flash?

- by Meganlee1984

I'm trying to update a clients site and the original developer left almost no instructions. The code is all updated through XML. Here is a sample of the code enter code here<FOLDER NAME="COMMERCIAL"> <GALLERY NAME="LOCANDA VERDE: New York"> <IMG HEIGHT="500" CAPTION="Some photo" WIDTH="393" SRC="locanda1.jpg" DX="60" DY="40" LINKTEXT="" LINKURL="" INFOTEXT="SOHO, NEW YORK"/> <IMG HEIGHT="300" CAPTION="Some photo" WIDTH="450" SRC="locanda2.jpg" DX="160" DY="80" LINKTEXT="" LINKURL="" INFOTEXT="SOHO, NEW YORK"/> <IMG HEIGHT="500" CAPTION="Some photo" WIDTH="393" SRC="locanda3.jpg" DX="80" DY="260" LINKTEXT="" LINKURL="" INFOTEXT="SOHO, NEW YORK"/> <IMG HEIGHT="500" CAPTION="Some photo" WIDTH="393" SRC="locanda4.jpg" DX="120" DY="60" LINKTEXT="" LINKURL="" INFOTEXT="SOHO, NEW YORK"/> <IMG HEIGHT="393" CAPTION="Some photo" WIDTH="500" SRC="locanda5.jpg" DX="180" DY="100" LINKTEXT="" LINKURL="" INFOTEXT="SOHO, NEW YORK"/> <IMG HEIGHT="500" CAPTION="Some photo" WIDTH="433" SRC="locanda6.jpg" DX="60" DY="140" LINKTEXT="" LINKURL="" INFOTEXT="SOHO, NEW YORK"/> <IMG HEIGHT="500" CAPTION="Some photo" WIDTH="393" SRC="locanda7.jpg" DX="100" DY="200" LINKTEXT="" LINKURL="" INFOTEXT="SOHO, NEW YORK"/> </GALLERY>`enter code here It relates to this page: http://meyerdavis.com/ Click Commercial Click Laconda Verde New York. The xml file pulls a jpg from 2 places, one is a thumb nail that are all 60 x 60 and then one is the bigger sized image. The issue that I'm having is that I can't figure out how the DX and DY coordinates are generated for each item. Any help would be much appreciated. ` Edit: Here's the code from the comment below. platformblock.expandspeed = 0.02; platformblock.h = 450 - platformblock.dy1; //platformblock.h = 402; platformblock.dy2 = 0; platformblock.onResize(); /**/ platformblock.onEnterFrame = function() { this.dy1 += (48 - this.dy1)*this.expandspeed; this.h = 450 - this.dy1; if(this.expandspeed<0.3) { this.expandspeed += 0.02; } if(Math.abs(this.dy1-48)<0.2) { this.dy1 = 48; } if(this.platform._height==402 && this.dy1==48){ this.h = null; this.onResize(); this.onEnterFrame = null; } } platformblock._resizeto(800, 402, _root.play, _root, 0.08); titleblockcontainer.play(); /**/ stop();

Read the article
idiomatic property changed notification in scala?

- by Jeremy Bell

I'm trying to find a cleaner alternative (that is idiomatic to Scala) to the kind of thing you see with data-binding in WPF/silverlight data-binding - that is, implementing INotifyPropertyChanged. First, some background: In .Net WPF or silverlight applications, you have the concept of two-way data-binding (that is, binding the value of some element of the UI to a .net property of the DataContext in such a way that changes to the UI element affect the property, and vise versa. One way to enable this is to implement the INotifyPropertyChanged interface in your DataContext. Unfortunately, this introduces a lot of boilerplate code for any property you add to the "ModelView" type. Here is how it might look in Scala: trait IDrawable extends INotifyPropertyChanged { protected var drawOrder : Int = 0 def DrawOrder : Int = drawOrder def DrawOrder_=(value : Int) { if(drawOrder != value) { drawOrder = value OnPropertyChanged("DrawOrder") } } protected var visible : Boolean = true def Visible : Boolean = visible def Visible_=(value: Boolean) = { if(visible != value) { visible = value OnPropertyChanged("Visible") } } def Mutate() : Unit = { if(Visible) { DrawOrder += 1 // Should trigger the PropertyChanged "Event" of INotifyPropertyChanged trait } } } For the sake of space, let's assume the INotifyPropertyChanged type is a trait that manages a list of callbacks of type (AnyRef, String) = Unit, and that OnPropertyChanged is a method that invokes all those callbacks, passing "this" as the AnyRef, and the passed-in String). This would just be an event in C#. You can immediately see the problem: that's a ton of boilerplate code for just two properties. I've always wanted to write something like this instead: trait IDrawable { val Visible = new ObservableProperty[Boolean]('Visible, true) val DrawOrder = new ObservableProperty[Int]('DrawOrder, 0) def Mutate() : Unit = { if(Visible) { DrawOrder += 1 // Should trigger the PropertyChanged "Event" of ObservableProperty class } } } I know that I can easily write it like this, if ObservableProperty[T] has Value/Value_= methods (this is the method I'm using now): trait IDrawable { // on a side note, is there some way to get a Symbol representing the Visible field // on the following line, instead of hard-coding it in the ObservableProperty // constructor? val Visible = new ObservableProperty[Boolean]('Visible, true) val DrawOrder = new ObservableProperty[Int]('DrawOrder, 0) def Mutate() : Unit = { if(Visible.Value) { DrawOrder.Value += 1 } } } // given this implementation of ObservableProperty[T] in my library // note: IEvent, Event, and EventArgs are classes in my library for // handling lists of callbacks - they work similarly to events in C# class PropertyChangedEventArgs(val PropertyName: Symbol) extends EventArgs("") class ObservableProperty[T](val PropertyName: Symbol, private var value: T) { protected val propertyChanged = new Event[PropertyChangedEventArgs] def PropertyChanged: IEvent[PropertyChangedEventArgs] = propertyChanged def Value = value; def Value_=(value: T) { if(this.value != value) { this.value = value propertyChanged(this, new PropertyChangedEventArgs(PropertyName)) } } } But is there any way to implement the first version using implicits or some other feature/idiom of Scala to make ObservableProperty instances function as if they were regular "properties" in scala, without needing to call the Value methods? The only other thing I can think of is something like this, which is more verbose than either of the above two versions, but is still less verbose than the original: trait IDrawable { private val visible = new ObservableProperty[Boolean]('Visible, false) def Visible = visible.Value def Visible_=(value: Boolean): Unit = { visible.Value = value } private val drawOrder = new ObservableProperty[Int]('DrawOrder, 0) def DrawOrder = drawOrder.Value def DrawOrder_=(value: Int): Unit = { drawOrder.Value = value } def Mutate() : Unit = { if(Visible) { DrawOrder += 1 } } }

Read the article
How to define generic super type for static factory method?

- by Esko

If this has already been asked, please link and close this one. I'm currently prototyping a design for a simplified API of a certain another API that's a lot more complex (and potentially dangerous) to use. Considering the related somewhat complex object creation I decided to use static factory methods to simplify the API and I currently have the following which works as expected: public class Glue<T> { private List<Type<T>> types; private Glue() { types = new ArrayList<Type<T>>(); } private static class Type<T> { private T value; /* some other properties, omitted for simplicity */ public Type(T value) { this.value = value; } } public static <T> Glue<T> glueFactory(String name, T first, T second) { Glue<T> g = new Glue<T>(); Type<T> firstType = new Glue.Type<T>(first); Type<T> secondType = new Glue.Type<T>(second); g.types.add(firstType); g.types.add(secondType); /* omitted complex stuff */ return g; } } As said, this works as intended. When the API user (=another developer) types Glue<Horse> strongGlue = Glue.glueFactory("2HP", new Horse(), new Horse()); he gets exactly what he wanted. What I'm missing is that how do I enforce that Horse - or whatever is put into the factory method - always implements both Serializable and Comparable? Simply adding them to factory method's signature using <T extends Comparable<T> & Serializable> doesn't necessarily enforce this rule in all cases, only when this simplified API is used. That's why I'd like to add them to the class' definition and then modify the factory method accordingly. PS: No horses (and definitely no ponies!) were harmed in writing of this question.

Read the article
LINQ Query returns false when it should be true.

- by deliriousDev

I have the following LINQ query written by a former developer and it isn't working when it should. public bool IsAvailable(Appointment appointment) { var appointments = _appointmentRepository.Get; var shifts = _scheduleRepository.Get; var city = _customerRepository.Find(appointment.CustomerId).City ?? appointment.Customer.City; const int durationHour = 1; DateTime scheduledEndDate = appointment.ScheduledTime.Add(new TimeSpan(durationHour, 0, 0)); var inWorkingHours = shifts .Where(x => //Check if any available working hours x.Employee.City == city && x.ShiftStart <= appointment.ScheduledTime && x.ShiftEnd >= scheduledEndDate && //check if not booked yet !appointments .Where(a => (appointment.Id == 0 || a.Id != appointment.Id) && a.Employee.Id == x.Employee.Id && ( (a.ScheduledTime <= appointment.ScheduledTime && appointment.ScheduledTime <= EntityFunctions.AddHours(a.ScheduledTime, durationHour)) || (a.ScheduledTime <= scheduledEndDate && scheduledEndDate <= EntityFunctions.AddHours(a.ScheduledTime, durationHour)) )) .Select(a => a.Employee.Id) .Contains(x.Employee.Id) ); if (inWorkingHours.Any()) { var assignedEmployee = inWorkingHours.FirstOrDefault().Employee; appointment.EmployeeId = assignedEmployee.Id; appointment.Employee = assignedEmployee; return true; } return false; } The query is suppose to handle the following scenarios Given An Appointment With A ScheduledTime Between A ShiftStart and ShiftEnd time But Does not match any employees in same city - (Return true, Assign as "Unassigned") Given An Appointment With A ScheduledTime Between A ShiftStart and ShiftEnd time AND Employee for that shift is in the same city as the customer (Return True AND Assign to the employee) If the customer is NOT in the same city as an employee we assign the appointment as "Unassigned" as along as the scheduledTime is within an of the employees shift start/end times If the customer is in the same city as an employee we assign the appointment to one of the employees (firstOrdefault) and occupy that timeslot. Appointments CAN NOT overlap (Assigned Ones). Unassigned can't overlap each other. This query use to work (I've been told). But now it doesn't and I have tried refactoring it and various other paths with no luck. I am now on week two and just don't know where the issue in the query is or how to write it. Let me know if I need to post anything further. I have verified appointments, shifts, city all populate with valid data so the issue doesn't appear to be with null or missing data.

Read the article
Unexpected output from Bubblesort program with MSVC vs TCC

- by Sujith S Pillai

One of my friends sent this code to me, saying it doesn't work as expected: #include<stdio.h> void main() { int a [10] ={23, 100, 20, 30, 25, 45, 40, 55, 43, 42}; int sizeOfInput = sizeof(a)/sizeof(int); int b, outer, inner, c; printf("Size is : %d \n", sizeOfInput); printf("Values before bubble sort are : \n"); for ( b = 0; b < sizeOfInput; b++) printf("%d\n", a[b]); printf("End of values before bubble sort... \n"); for ( outer = sizeOfInput; outer > 0; outer-- ) { for ( inner = 0 ; inner < outer ; inner++) { printf ( "Comparing positions: %d and %d\n",inner,inner+1); if ( a[inner] > a[inner + 1] ) { int tmp = a[inner]; a[inner] = a [inner+1]; a[inner+1] = tmp; } } printf ( "Bubble sort total array size after inner loop is %d :\n",sizeOfInput); printf ( "Bubble sort sizeOfInput after inner loop is %d :\n",sizeOfInput); } printf ( "Bubble sort total array size at the end is %d :\n",sizeOfInput); for ( c = 0 ; c < sizeOfInput; c++) printf("Element: %d\n", a[c]); } I am using Micosoft Visual Studio Command Line Tool for compiling this on a Windows XP machine. cl /EHsc bubblesort01.c My friend gets the correct output on a dinosaur machine (code is compiled using TCC there). My output is unexpected. The array mysteriously grows in size, in between. If you change the code so that the variable sizeOfInput is changed to sizeOfInputt, it gives the expected results! A search done at Microsoft Visual C++ Developer Center doesn't give any results for "sizeOfInput". I am not a C/C++ expert, and am curious to find out why this happens - any C/C++ experts who can "shed some light" on this? Unrelated note: I seriously thought of rewriting the whole code to use quicksort or merge sort before posting it here. But, after all, it is not Stooge sort... Edit: I know the code is not correct (it reads beyond the last element), but I am curious why the variable name makes a difference.

Read the article
Special scheduling Algorithm (pattern expansion)

- by tovare

Question Do you think genetic algorithms worth trying out for the problem below, or will I hit local-minima issues? I think maybe aspects of the problem is great for a generator / fitness-function style setup. (If you've botched a similar project I would love hear from you, and not do something similar) Thank you for any tips on how to structure things and nail this right. The problem I'm searching a good scheduling algorithm to use for the following real-world problem. I have a sequence with 15 slots like this (The digits may vary from 0 to 20) : 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 (And there are in total 10 different sequences of this type) Each sequence needs to expand into an array, where each slot can take 1 position. 1 1 0 0 1 1 1 0 0 0 1 1 1 0 0 1 1 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 1 1 0 0 0 1 1 0 0 1 1 0 0 0 1 1 1 0 0 0 1 1 The constraints on the matrix is that: [row-wise, i.e. horizontally] The number of ones placed, must either be 11 or 111 [row-wise] The distance between two sequences of 1 needs to be a minimum of 00 The sum of each column should match the original array. The number of rows in the matrix should be optimized. The array then needs to allocate one of 4 different matrixes, which may have different number of rows: A, B, C, D A, B, C and D are real-world departments. The load needs to be placed reasonably fair during the course of a 10-day period, not to interfere with other department goals. Each of the matrix is compared with expansion of 10 different original sequences so you have: A1, A2, A3, A4, A5, A6, A7, A8, A9, A10 B1, B2, B3, B4, B5, B6, B7, B8, B9, B10 C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 Certain spots on these may be reserved (Not sure if I should make it just reserved/not reserved or function-based). The reserved spots might be meetings and other events The sum of each row (for instance all the A's) should be approximately the same within 2%. i.e. sum(A1 through A10) should be approximately the same as (B1 through B10) etc. The number of rows can vary, so you have for instance: A1: 5 rows A2: 5 rows A3: 1 row, where that single row could for instance be: 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 etc.. Sub problem* I'de be very happy to solve only part of the problem. For instance being able to input: 1 1 2 3 4 2 2 3 4 2 2 3 3 2 3 And get an appropriate array of sequences with 1's and 0's minimized on the number of rows following th constraints above.

Read the article
WLI domain with 3 servers - issues on JPD process startup

- by XpiritO

Hi there. I'm currently working on a clustered WLI environment which comprehends 3 servers: 1 admin server ("AdminServer") and 2 managed servers ("mn1" and "mn2") grouped as a cluster, as follows: Architecture diagram: http://img72.imageshack.us/img72/4112/clusterdiagram.jpg I've developed a JPD process to execute some scheduled tasks, invoked using a Message Broker. I've deployed this project into a single-server WLI domain (with AdminServer only) and it works as expected: the JPD process is invoked (I've configured a Timer Event Generator instance to start it up). Message broker: http://img532.imageshack.us/img532/1443/wlimessagebroker.jpg Timer event generator: http://img408.imageshack.us/img408/7358/wlitimereventgenerator.jpg In order to achieve fail-over and load-balancing capabilities, I'm currently trying to deploy this JPD process into this clustered WLI environment. Although, I'm having some issues with this, as I cannot get it to work properly, even if it still works. Here is a screenshot of the "WLI Process Instance Monitor" (with AdminServer and mn1 instances up and running): http://img710.imageshack.us/img710/8477/wliprocessinstancemonit.jpg According to this screen the process seems to be running, as it shows in this instance monitor screen. However, I don't see any output coming out neither at AdminServer console or mn1 console. In single-server domain it was visible output from JPD process "timeout" callback method, wich implementation is shown below: @com.bea.wli.control.broker.MessageBroker.StaticSubscription(xquery = "", filterValueMatch = "", channelName = "/SamplePrefix/Samples/SampleStringChannel", messageBody = "{x0}") public void subscription(java.lang.String x0) { String toReturn=""; try { Context myCtx = new InitialContext(); MBeanHome mbeanHome = (MBeanHome)myCtx.lookup("weblogic.management.home.localhome"); toReturn=mbeanHome.getMBeanServer().getServerName(); System.out.println("**** executed at **** " + System.currentTimeMillis() + " by: " + toReturn); } catch (Exception e) { System.out.println("Exception!"); e.printStackTrace(); } } (...) @org.apache.beehive.controls.api.events.EventHandler(field = "myT", eventSet = com.bea.control.WliTimerControl.Callback.class, eventName = "onTimeout") public void myT_onTimeout(long time, java.io.Serializable data) { // #START: CODE GENERATED - PROTECTED SECTION - you can safely add code above this comment in this method. #// // input transform System.out.println("**** published at **** " + System.currentTimeMillis()); publishControl.publish("aaaa"); // parameter assignment // #END : CODE GENERATED - PROTECTED SECTION - you can safely add code below this comment in this method. #// } and here is the output visible at "AdminServer" console in single-server domain testing: **** published at **** 1273238090713 **** executed at **** 1273238132123 by: AdminServer **** published at **** 1273238152462 **** executed at **** 1273238152562 by: AdminServer (...) What may be wrong with my clustered configuration? Am I missing something to accomplish clustered deployment? Thanks in advance for your help.

Read the article
a4j:support within a rich:modalPanel

- by Andy Deighton

Hi all, I've hit a wall. I know the a4j and rich tags pretty well (I use Seam 2.2.0 and Richfaces 3.3.1). However, I'm trying to do something quite simple, but in a rich:modalPanel. It seems that rich:modalPanels do not allow Ajax events to be fired. Here's a simple breakdown: I have a h:selectOneMenu with some items in it and whose value is attached to a backing bean. Attached to that h:selectOneMenu is a a4j:support tag so that whenever the change event is fired, the backing bean should get updated. Truly simple stuff eh? However, when this h:selectOneMenu is in a rich:modalPanel the onchange event doesn't update the backing bean until the rich:modalPanel closes. I can confirm this because I'm running it in Eclipse debug mode and I have a breakpoint on the setter of the property that's hooked up to the h:selectOneMenu. This is driving me mad! This is vanilla stuff for Ajax, but rich:modalPanels don't seem to allow it. So, the question is: can I do Ajax stuff within a rich:modalPanel? I'm basically trying to use the rich:modalPanel as a form (I've tried a4j:form and h:form to no avail) that reacts to changes to the drop down (e.g. when the user changes the drop down, a certain part of the form should get reRendered). Am I trying to do something that's not possible? Here's a simplified version of the modalPanel: <rich:modalPanel id="quickAddPanel"> <div> <a4j:form id="quickAddPaymentForm" ajaxSubmit="true"> <s:decorate id="paymentTypeDecorator"> <a4j:region> <h:selectOneMenu id="paymentType" required="true" value="#{backingBean.paymentType}" tabindex="1"> <s:selectItems label="#{type.description}" noSelectionLabel="Please select..." value="#{incomingPaymentTypes}" var="type"/> <s:convertEnum/> <a4j:support ajaxSingle="true" event="onchange" eventsQueue="paymentQueue" immediate="true" limitToList="true" reRender="paymentTypeDecorator, paymentDetailsOutputPanel, quickAddPaymentForm"/> </h:selectOneMenu> </a4j:region> </s:decorate> </fieldset> <fieldset class="standard-form"> <div class="form-title">Payment details</div> <a4j:outputPanel id="paymentDetailsOutputPanel"> <h:outputText value="This should change whenever dropdown changes: #{backingBean.paymentType}"/> </a4j:outputPanel> </fieldset> </a4j:form> </div> </rich:modalPanel> Regards, Andy

Read the article
How can I prevent external MSBuild files from being cached (by Visual Studio) during a project build

- by Damian Powell

I have a project in my solution which started life as a C# library project. It's got nothing of any interest in it in terms of code, it is merely used as a dependency in the other projects in my solution in order to ensure that it is built first. One of the side-effects of building this project is that a shared AssemblyInfo.cs is created which contains the version number in use by the other projects. I have done this by adding the following to the .csproj file: <ItemGroup> <None Include="Properties\AssemblyInfo.Shared.cs.in" /> <Compile Include="Properties\AssemblyInfo.Shared.cs" /> <None Include="VersionInfo.targets" /> </ItemGroup> <Import Project="$(ProjectDir)VersionInfo.targets" /> <Target Name="BeforeBuild" DependsOnTargets="UpdateSharedAssemblyInfo" /> The referenced file, VersionInfo.targets, contains the following: <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup>  </PropertyGroup> <Target Name="UpdateSharedAssemblyInfo">  </Target> </Project> The contents of the VersionInfo.targets file could simply be embedded within the .csproj file but it is external because I am trying to turn all of this into a project template. I want the users of the template to be able to add the new project to the solution, edit the VersionInfo.targets file, and run the build. The problem is that modifying and saving the VersionInfo.targets file and rebuilding the solution has no effect - the project file uses the values from the .targets file as they were when the project was opened. Even unloading and reloading the project has no effect. In order to get the new values, I need to close Visual Studio and reopen it (or reload the solution). How can I set this up so that the configuration is external to the .csproj file and not cached between builds?

Read the article
LinearLayout as custom button, OnClickListener never called

- by ohra

I've been using the common Android Button with both icon (drawableTop) and text. It works really poorly if you want to have a non-standard size button, so I decided to make a custom button with a LinearLayout having the following layout: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" style="@style/ButtonHoloDark" android:layout_width="fill_parent" android:layout_height="fill_parent" android:gravity="center" android:clickable="true" android:focusable="true" android:orientation="vertical" > <ImageView android:id="@+id/buttonIcon" android:layout_width="fill_parent" android:layout_height="wrap_content" android:duplicateParentState="true" /> <TextView android:id="@+id/buttonText" android:layout_width="fill_parent" android:layout_height="wrap_content" android:duplicateParentState="true" android:gravity="center" android:textColor="@color/white" /> </LinearLayout> The layout is used by a custom class: public class CustomIconButton extends LinearLayout { public CustomIconButton(Context context, AttributeSet attrs) { super(context, attrs); setAttributes(context, attrs); LayoutInflater.from(context).inflate(R.layout.custom_icon_button, this, true); } ... But when I set an OnClickListener on my button in its parent layout it never gets called. I can only receive clicks if a set the listener to the ImageView and/or TextView. This leads to two possible effects when the button is clicked: The click is inside the ImageView or the TextView. The click is registered ok, but the buttons state drawable doesn't change i.e. it doesn't appear depressed. The click is inside the "empty area" of the button. The click is not registered, but the state drawable works ok. Neither of these is feasible. I've played around with the following attributes on the LinearLayout or its children, but none really seem to have any effect whether true or false: duplicateParentState clickable focusable There doesn't seem to be any reasonable way to get the LinearLayout parent receive clicks instead of its children. I've seen some possible solutions overriding dispatchTouchEvent or onInterceptTouchEvent on the custom component itself, but that really seems like a big mess if I have to start analyzing touch events to identify proper clicks. So OnClickListener on a LinearLayout with children = no go?

Read the article
Why is my Interface Builder wiring so bonkers and what can I do to straighten it out?

- by editor

I've been working on an iPhone application in XCode and Interface Builder of the Tab Bar project type. After getting a table view of topics (business sectors) working fine I realized that I would need to add a Navigation Control to allow the user to drill into a subtopics (subsectors) table. As a green Objective-C developer, that was confusing, but I managed to get it working by reading various documentation trying out a few different IB options. My current setup is a Tab Bar Controller with Tab 1 as a Navigation Controller and Tab 2 a plain view with a Table View placed into it. The wiring works: I can log when table rows are selected and I'm ready to push a new View Controller onto the stack so that I can display the subtopics Table View. My problem: For some reason the first tab's Table View is a delegate and dataSource of the second ta. It doesn't make sense to me and I can't figure out why that's the only setup that works. Here is the wiring: Navigation Controller (Sectors) is a delegate of Tab Bar Navigation Bar is a delegate of Navigation Controller (Sectors) View Contoller (Sectors) has a view of Table View Table View (in Navigation Controller (Sectors)) is a delegate of First View Controller (Companies) Table View (in Navigation Controller (Sectors)) is a dataSource outlet of First View Controller (Companies) First View Controller (Companies) First View Contoller (Sectors) has a view of Table View Table View (in First View Controller (Companies)) is not hooked up to a dataSource outlet and is not a delegate When I click the tab buttons and look at the Inspector I see that the first tab is correctly hooked up to my MainWindow.xib and the second tab has selected a nib called SecondView.xib. It's in the File's Owner of MainWindow.xib where I inherit UITableViewDataSource and UITableViewDelegate (and also UITabBarControllerDelegate) in the .h, and in the .m where I implement the delegate methods. Why does this setup only work when the Table View in my first tab (View Controller (Sectors)) is a delegate and dataSource of the second tab? I'm confused: why wouldn't it need to be hooked up to the Navigation Controller-enabled tab in which the Table View is seen (Navigation Controller (Sectors))? The Table View seen on the second tab has neither dataSource and is not a delegate. I'm having trouble getting a pushViewController to fire (self.navigationController is not nil but the new View Controller still doesn't load) and I suspect that I need to work out this IB wiring issue before I can troubleshoot why the Nav Controller won't push a new View Controller onto the stack. if(nil == self.navigationController) { NSLog(@"self.navigationController is nil."); } else { NSLog(@"self.navigationController is not nil."); SectorList *subsectorViewController = [[SectorList alloc] initWithNibName:@"SectorList" bundle:nil]; subsectorViewController.title = @"Subsectors"; [[self navigationController] pushViewController:subsectorViewController animated:YES]; [subsectorViewController release]; }

Read the article
Java Http request on api.stackexchange with json response

- by taoder

I'm trying to use the api-stackexchange with java but when I do the request and try to parse the response with a json parser I have an error. public ArrayList<Question> readJsonStream(InputStream in) throws IOException { JsonReader reader = new JsonReader(new InputStreamReader(in, "UTF-8")); reader.setLenient(true); try { System.out.println(reader.nextString()); // ? special character return readItem(reader); } finally { reader.close(); } } public ArrayList<Question> readItem(JsonReader reader) throws IOException { ArrayList<Question> questions = new ArrayList<Question>(); reader.beginObject(); while (reader.hasNext()) { System.out.println("here");//not print the error is before String name = reader.nextName(); if (name.equals("items")) { questions = readQuestionsArray(reader); } } reader.endObject(); return questions; } public final static void main(String[] args) throws Exception { URIBuilder builder = new URIBuilder(); builder.setScheme("http").setHost("api.stackexchange.com").setPath("/2.0/search") .setParameter("site", "stackoverflow") .setParameter("intitle" ,"workaround") .setParameter("tagged","javascript"); URI uri = builder.build(); String surl = fixEncoding(uri.toString()+"&filter=!)QWRa9I-CAn0PqgUwq7)DVTM"); System.out.println(surl); Test t = new Test(); try { URL url = new URL(surl); t.readJsonStream(url.openStream()); } catch (IOException e) { e.printStackTrace(); } } And the error is: com.google.gson.stream.MalformedJsonException: Expected literal value at line 1 column 19 Here is an example of the Json : { "items": [ { "question_id": 10842231, "score": 0, "title": "How to push oath token to LocalStorage or LocalSession and listen to the Storage Event? (SoundCloud Php/JS bug workaround)", "tags": [ "javascript", "javascript-events", "local-storage", "soundcloud" ], "answers": [ { "question_id": 10842231, "answer_id": 10857488, "score": 0, "is_accepted": false } ], "link": "http://stackoverflow.com/questions/10842231/how-to-push-oath-token-to-localstorage-or-localsession-and-listen-to-the-storage", "is_answered": false },... So what's the problem? Is the Json really malformed? Or did I do something not right? Thanks, Anthony

Read the article
C program using inotify to monitor multiple directories along with sub-directories?

- by lakshmipathi

I have program which monitors a directory (/test) and notify me. I want to improve this to monitor another directory (say /opt). And also how to monitor it's subdirectories , current i'll get notified if any changes made to files under /test . but i'm not getting any inotifcation if changes made sub-directory of /test, that is touch /test/sub-dir/files.txt .. Here my current code - hope this will help /* Simple example for inotify in Linux. inotify has 3 main functions. inotify_init1 to initialize inotify_add_watch to add monitor then inotify_??_watch to rm monitor.you the what to replace with ??. yes third one is inotify_rm_watch() */ #include <sys/inotify.h> int main(){ int fd,wd,wd1,i=0,len=0; char pathname[100],buf[1024]; struct inotify_event *event; fd=inotify_init1(IN_NONBLOCK); /* watch /test directory for any activity and report it back to me */ wd=inotify_add_watch(fd,"/test",IN_ALL_EVENTS); while(1){ //read 1024 bytes of events from fd into buf i=0; len=read(fd,buf,1024); while(i<len){ event=(struct inotify_event *) &buf[i]; /* check for changes */ if(event->mask & IN_OPEN) printf("%s :was opened\n",event->name); if(event->mask & IN_MODIFY) printf("%s : modified\n",event->name); if(event->mask & IN_ATTRIB) printf("%s :meta data changed\n",event->name); if(event->mask & IN_ACCESS) printf("%s :was read\n",event->name); if(event->mask & IN_CLOSE_WRITE) printf("%s :file opened for writing was closed\n",event->name); if(event->mask & IN_CLOSE_NOWRITE) printf("%s :file opened not for writing was closed\n",event->name); if(event->mask & IN_DELETE_SELF) printf("%s :deleted\n",event->name); if(event->mask & IN_DELETE) printf("%s :deleted\n",event->name); /* update index to start of next event */ i+=sizeof(struct inotify_event)+event->len; } } }

Read the article
What is the most effective way to test for combined keyboard arrow direction in ActionScript 3.0?

- by Relee

I need to monitor the direction a user is indicating using the four directional arrow keys on a keyboard in ActionScript 3.0 and I want to know the most efficient and effective way to do this. I've got several ideas of how to do it, and I'm not sure which would be best. I've found that when tracking Keyboard.KEY_DOWN events, the event repeats as long as the key is down, so the event function is repeated as well. This broke the method I had originally chosen to use, and the methods I've been able to think of require a lot of comparison operators. The best way I've been able to think of would be to use bitwise operators on a uint variable. Here's what I'm thinking var _direction:uint = 0x0; // The Current Direction That's the current direction variable. In the Keyboard.KEY_DOWN event handler I'll have it check what key is down, and use a bitwise AND operation to see if it's already toggled on, and if it's not, I'll add it in using basic addition. So, up would be 0x1 and down would be 0x2 and both up and down would be 0x3, for example. It would look something like this: private function keyDownHandler(e:KeyboardEvent):void { switch(e.keyCode) { case Keyboard.UP: if(!(_direction & 0x1)) _direction += 0x1; break; case Keyboard.DOWN: if(!(_direction & 0x2)) _direction += 0x2; break; // And So On... } } The keyUpHandler wouldn't need the if operation since it only triggers once when the key goes up, instead of repeating. I'll be able to test the current direction by using a switch statement labeled with numbers from 0 to 15 for the sixteen possible combinations. That should work, but it doesn't seem terribly elegant to me, given all of the if statements in the repeating keyDown event handler, and the huge switch. private function checkDirection():void { switch(_direction) { case 0: // Center break; case 1: // Up break; case 2: // Down break; case 3: // Up and Down break; case 4: // Left break; // And So On... } } Is there a better way to do this?

Read the article
Bound DataGridView not updating data source

- by Max Yaffe

I'm trying to bind a table of structures to a DataGridView. Loading and viewing the table is working fine but I can't edit a value and get it stored back into the table. Here's what I'm doing. I have a "primitive" data type, Real defined by public struct MyReal:IMyPrimative { public Double m_Real; //... public MyReal(String val) { m_Real = default(Double); Init(val); } //... } It gets used in a structure: public struct MyReal_Record : IMyRecord { public MyReal Freq { get; set;} MyReal_Record(String[] vals) { Init(vals); } } And the structure is used to define a table using a generic Binding List public class MyTable<S> : BindingList<S> where S: struct, IMyRecord { public Type typeofS; public MyTable() { typeofS = typeof(S); // ... } This table is used as a binding source for a grid, dynamically. private void miLoadFile_Click(object sender, EventArgs e) { MyModel.Table<Real_Record> RTable = new MyModel.Table<Real_Record>(); //... Table initialized here //set up grid with virtual mode dataGridView1.DataSource = RTable; } All of this works fine and I can create RTable, initialize it and display it in a grid. The grid allows editing and has events set for CellParsing and CellFormatting which look like: private void dataGridView1_CellFormatting(object sender, DataGridViewCellFormattingEventArgs e) { if (e.DesiredType != typeof(String)) return; e.Value = e.Value.ToString(); } private void dataGridView1_CellParsing(object sender, DataGridViewCellParsingEventArgs e) { if (e.DesiredType != typeof(MyReal)) return; e.Value = new MyReal(e.Value.ToString()); e.ParsingApplied = true; this.dataGridView1.UpdateCellValue(e.ColumnIndex, e.RowIndex); } When I edit a value in a cell, I can change the text. On leaving the cell, CellParsing fires and the event handler is called. Everything seems to be correct going into the CellParsing handler. e.DesiredType is MyReal. e.Value is a string with the new value. After the new MyReal is created from the string, e.Value is set correctly. RowIndex and ColumnIndex are correct. ReadOnly is set false. However, when I leave the cell, the system restores the original value to the cell. I thought the UpdateCellValue would replace the value in the dataSource but I seem to be missing something. What did I miss? Thanks, Max

Read the article
HTML5 Video Tag in Chrome - Why is currentTime ignored when video downloaded from my webserver?

- by larson4

I want to be able to play back video from a specific time using the HTML5 video tag (and currently only need to worry about Chrome). This is possible by setting the currentTime property of a video element. That works fine in Chrome with a video sourced from html5rocks.com, but is ignored when the same file is loaded from my own local webserver. Using the sample code from http://playground.html5rocks.com/#video_tag, I have arrived at the following HTML: <!DOCTYPE html> <html> <body> <video id="video1" width="320" height="240" volume=".7" controls preload=true autobuffer> <source src="http://playground.html5rocks.com/samples/html5_misc/chrome_japan.webm" type='video/webm; codecs="vp8, vorbis"'/> </video> <input type=button onclick="play()" value="play"> <input type=button onclick="setTime()" value="setTime"> <input type=button onclick="pause()" value="pause"> <script> var play=function() { document.getElementById("video1").play(); } var setTime=function() { document.getElementById("video1").currentTime=2; } var pause=function() { document.getElementById("video1").pause(); } </script> </body> </html> Using Chrome, if you Wait for the video to download for a bit (until the progress bar is about 10% in) Press setTime - you should notice the time jump to 2 seconds press play ...the video will start at 2 seconds in. But if I download the webm file in the source src to my local webserver, and change src to point locally: <source src="chrome_japan.webm" type='video/webm; codecs="vp8, vorbis"'/> ...then setting currentTime is complete ignored. No errors are showing in the developer tools console. Now, my webserver is serving this with mime type "video/webm", but it will be served like any old file -- not streamed. Do I need a webserver that streams in some specific way? What else could be at fault here? Note: The webserver is a proprietary platform and won't have any of the same exact settings or controls one might expect of Tomcat or some other commonly used webserver, though there may be other ways to achieve the same effect.

Read the article

< Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658 | Next Page >