mercurial build - Page 651

SharePoint 2010 Diagnostic Studio Remote Diag

- by juanlarios

I have had some time this week to try out some tools that I have been meaning to try out. This week I am trying out the SP 2010 Diagnostic Studio. I installed it successfully and tried it on my development evironment. I was able to build a report and a snapshot of the environment. I decided to turn my attention to my Employer's intranet environment. This would allow me to analyze it and measure it against benchmarks. I didn't want to install the Diagnostic studio on the Production Envorinment, lucky for me, the Diagnostic studio can be run remotely, well...kind of. Issue My development environment is a stand alone, full installation of SharePoint 2010 Server. It has Office 2010, SQL 2008 Enterprise, a DC...well you get the point, it's jammed packed! But more importantly it's a stand alone, self contained VM environment. Well Microsoft has instructions as to how to connect remotely with Diagnostic Studio here. The deciving part of this is that the SP2010DS prompts you for credentails. So I thought I was getting the right account to run the reports. I tried all the Power Shell commands in the link above but I still ended up getting the following errors: 06/28/2011 12:50:18 Connecting to remote server failed with the following error message : The WinRM client cannot process the request...If the SPN exists, but CredSSP cannot use Kerberos to validate the identity of the target computer and you still want to allow the delegation of the user credentials to the target computer, use gpedit.msc and look at the following policy: Computer Configuration -> Administrative Templates -> System -> Credentials Delegation -> Allow Fresh Credentials with NTLM-only Server Authentication. Verify that it is enabled and configured with an SPN appropriate for the target computer. For example, for a target computer name "myserver.domain.com", the SPN can be one of the following: WSMAN/myserver.domain.com or WSMAN/*.domain.com. Try the request again after these changes. For more information, see the about_Remote_Troubleshooting Help topic. 06/28/2011 12:54:47 Access to the path '\\<targetserver>\C$\Users\<account logging in>\AppData\Local\Temp' is denied. You might also get an error message like this: The WinRM client cannot process the request. A computer policy does not allow the delegation of the user credentials to the target computer. Explanation After looking at the event logs on the target environment, I noticed that there were a several Security Exceptions. After looking at the specifics around who was denied access, I was able to see the account that was being denied access, it was the client machine administrator account. Well of course that was never going to work!!! After some quick Googling, the last error message above will lead you to edit the Local Group Policy on the client server. And although there are instructions from microsoft around doing this, it really will not work in this scenario. Notice the Description and how it only applices to authentication mentioned? Resolution I can tell you what I did, but I wish there was a better way but I simply don't know if it's duable any other way. Because my development environment had it's own DC, I didn't really want to mess with Kerberos authentication. I would also not be smart to connect that server to the domain, considering it has it's own DC. I ended up installing SharePoint 2010 Diagnostic Studio on another Windows 7 Dev environment I have, and connected the machien to the domain. I ran all the necesary remote credentials commands mentioned here. Those commands add the group policy for you! Once I did this I was able to authenticate properly and I was able to get the reports. Conclusion You can run SharePoint 2010 Diagnostic Studio Remotely but it will require some specific scenarions. A couple of things I should mention is that as far as I understand, SP2010 DS, will install agents on your target environment to run tests and retrieve the data. I was a Farm Administrator, and also a Server Admin on SharePoint Server. I am not 100% sure if you need all those permissions but I that's just what I have to my internal intranet. I deally I would like to have a machine that I can have SharePoint 2010 DIagnostic Studio installed and I can run that against client environments. It appears that I will not be able to do that, unless I enable Kerberos on my Windows 7 Machine now. If you have it installed in the same way I would like to have it, please let me know, I'll keep trying to get what I'm after. Hope this helps someone out there doing the same.

Read the article

Adaptive Layout for ADF Faces on Tablets

- by Shay Shmeltzer

In the 11.1.16 version of Oracle ADF we started adding specific features to the ADF Faces components so they'll work better on iPad tablets. In this entry I'm going to highlight some new capabilities that we have added to the 11.1.2.3 release. (note if you are still on the 11.1.1.* branch - you'll need to wait for 11.1.1.7 to get the features discussed here). The two key additions in the 11.1.2.3 version compared to the 11.1.1.6 features for iPad support include: pagination for tables and adaptive flow layout. The pagination for table is self explanatory, basically since iPad don't support scroll bars, we automatically switch the table component to render with a pagination toolbar that allow you to scroll set of records or directly jump to a specific set. See the image below. The adaptive flow layout takes a bit more explanation. On regular desktops the UI that you usually build for ADF Faces screens is going to use stretch layout - meaning that it stretches to fill the whole area of the browser window. If you resize the browser windoe, the ADF Faces page resizes with it. If your browser window is too small, scroll bars will appear to allow you to scroll to areas that are "hidden". However on an iPad, this is probably not the type of layout you want - you would rather have a flow layout that eliminates scroll bars and instead allows you to scroll down the page. Basically your want the page to be sized based on its content, rather then based on the browser window size. In ADF Faces terminology this can be done with the dimensionsFrom property set to "children". And here comes the tricky part, since in the past(and also today) when you create an ADF Faces page and add a stretchable component to it, the dimensionsFrom property is set to parent by default. This will be true to other layout components you'll add as well. At this point you might be wondering "Does this mean I'll need to go to each of the layout components in my page and modify the dimensionsFrom property value to be children?" ADF Faces to the rescue... To eliminate the need to do this tedious manual changes, we introduced a new web.xml parameter "oracle.adf.view.rich.geometry.DEFAULT_DIMENSIONS" You'll basically add the following to your web.xml <context-param> <description> This parameter controls the default value for component geometry on the page. Supported values are: legacy - component attributes use the default values as specified for the attributes in the tag documentation (default value) auto - component attributes use the correct default value given the value of their parent component. For example, with this setting, the panelStretchLayout will use "auto" as the default value for its "dimensionsFrom" attribute instead of "parent". </description> <param-name>oracle.adf.view.rich.geometry.DEFAULT_DIMENSIONS</param-name> <param-value>auto</param-value> </context-param> Once you set this parameter, you only need to set the dimensionsFrom attribute for the top level layout component on your page, and the rest of the components will adjust accordingly. One trick that you can use, and that is used in the demo below, is to have the dimensionsFrom property depend on the type of client that access your application. This way you can switch between stretch or flow layout based on the device accessing your application. For example I use the following in my page: <af:panelStretchLayout topHeight="70px" startWidth="0px" endWidth="0px" dimensionsFrom="#{adfFacesContext.agent.capabilities['touchScreen'] eq 'none' ? 'parent' : 'children' }"> Which results in a flow layout for iPads and a stretch layout for regular browsers. Check out the result in the below demo: &lt;span id=&quot;XinhaEditingPostion&quot;&gt;&lt;/span&gt;

Read the article

Existential CAML - does an item exist?

- by PointsToShare

© 2011 By: Dov Trietsch. All rights reserved More CAML and existence. In “SharePoint List Issues” and “Passing the CAML thru the EY of the NEEDL we saw how to use CAML to return a subset of a list and also how to check the existence of lists, fields, defaults, and values. Here is a general function that may be used to get a subset of a list by comparing a “text” type field to a given value. The function is pretty smart. It can be used to check existence or to return a collection of items that may be further processed. It handles non existing fields and replaces them with the ubiquitous “Title”, but only once! /// Build an SPQuery that returns a selected set of columns from a List /// titleField must be a "Text" type field /// When the titleField parameter is empty ("") "Title" is assumed /// When the title parameter is empty ("") All is assumed /// When the columnNames parameter is null, the query returns all the fields /// When the rowLimit parameter is 0, the query return all the items. /// with a non-zero, the query returns at most rowLimits /// /// usage: to check if an item titled "Blah" exists in your list, do: /// colNames = {"Title"} /// col = GetListItemColumnByTitle(myList, "", "Blah", colNames, 1) /// Check the col.Count. if > 0 the item exists and is in the collection private static SPListItemCollection GetListItemColumnByTitle(SPList list, string titleField, string title, string[] columnNames, uint rowLimit) { try { char QT = Convert.ToChar((int)34); SPQuery query = new SPQuery(); if (title != "") { string tf = titleField; if (titleField == "") tf = "Title"; tf = CAMLThisName(list, tf, "Title"); StringBuilder titleQuery = new StringBuilder ("<Where><Eq><FieldRef Name="); titleQuery.Append(QT); titleQuery.Append(tf); titleQuery.Append(QT); titleQuery.Append("/><Value Type="); titleQuery.Append(QT); titleQuery.Append("Text"); titleQuery.Append(QT); titleQuery.Append(">"); titleQuery.Append(title); titleQuery.Append("</Value></Eq></Where>"); query.Query = titleQuery.ToString(); } if (columnNames.Length != 0) { StringBuilder sb = new StringBuilder(""); bool TitleAlreadyIncluded = false; foreach (string columnName in columnNames) { string tst = CAMLThisName(list, columnName, "Title"); //Allow Title only once if (tst != "Title" || !TitleAlreadyIncluded) { sb.Append("<FieldRef Name="); sb.Append(QT); sb.Append(tst); sb.Append(QT); sb.Append("/>"); if (tst == "Title") TitleAlreadyIncluded = true; } } query.ViewFields = sb.ToString(); } if (rowLimit > 0) { query.RowLimit = rowLimit; } SPListItemCollection col = list.GetItems(query); return col; } catch (Exception ex) { //Console.WriteLine("GetListItemColumnByTitle" + ex.ToString()); //sw.WriteLine("GetListItemColumnByTitle" + ex.ToString()); return null; } } Here I called it for a list in which “Author” (it is the internal name for “Created”) and “Blah” do not exist. The list of column names is: string[] columnNames = {"Test Column1", "Title", "Author", "Allow Multiple Ratings", "Blah"}; So if I use this call, I get all the items for which “01-STD MIL_some” has the value of 1. the fields returned are: “Test Column1”, “Title”, and “Allow Multiple Ratings”. Because “Title” was already included and the default for non exixsting is “Title”, it was not replicated for the 2 non-existing fields. SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 0); The following call checks if there are any items where “01-STD MIL_some” has the value of “1”. Note that I limited the number of returned items to 1. SPListItemCollection col = GetListItemColumnByTitle(masterList, "01-STD MIL_some", "1", columnNames, 1); The code also uses the CAMLThisName function that checks for an existence of a field and returns its InternalName. This is yet another useful function that I use again and again. /// <summary> /// return a fields internal name (CAMLName) /// or the "default" name that you passed. /// To check existence pass "" or some funny name like "mud in your eye" /// </summary> public static string CAMLThisName(SPList list, string name, string def) { String CAMLName = def; SPField fld = GetFieldByName(list, name); if (fld != null) { CAMLName = fld.InternalName; } return CAMLName; } That’s all folks?!

Read the article

Namespaces are obsolete

- by Bertrand Le Roy

To those of us who have been around for a while, namespaces have been part of the landscape. One could even say that they have been defining the large-scale features of the landscape in question. However, something happened fairly recently that I think makes this venerable structure obsolete. Before I explain this development and why it’s a superior concept to namespaces, let me recapitulate what namespaces are and why they’ve been so good to us over the years… Namespaces are used for a few different things: Scope: a namespace delimits the portion of code where a name (for a class, sub-namespace, etc.) has the specified meaning. Namespaces are usually the highest-level scoping structures in a software package. Collision prevention: name collisions are a universal problem. Some systems, such as jQuery, wave it away, but the problem remains. Namespaces provide a reasonable approach to global uniqueness (and in some implementations such as XML, enforce it). In .NET, there are ways to relocate a namespace to avoid those rare collision cases. Hierarchy: programmers like neat little boxes, and especially boxes within boxes within boxes. For some reason. Regular human beings on the other hand, tend to think linearly, which is why the Windows explorer for example has tried in a few different ways to flatten the file system hierarchy for the user. 1 is clearly useful because we need to protect our code from bleeding effects from the rest of the application (and vice versa). A language with only global constructs may be what some of us started programming on, but it’s not desirable in any way today. 2 may not be always reasonably worth the trouble (jQuery is doing fine with its global plug-in namespace), but we still need it in many cases. One should note however that globally unique names are not the only possible implementation. In fact, they are a rather extreme solution. What we really care about is collision prevention within our application. What happens outside is irrelevant. 3 is, more than anything, an aesthetical choice. A common convention has been to encode the whole pedigree of the code into the namespace. Come to think about it, we never think we need to import “Microsoft.SqlServer.Management.Smo.Agent” and that would be very hard to remember. What we want to do is bring nHibernate into our app. And this is precisely what you’ll do with modern package managers and module loaders. I want to take the specific example of RequireJS, which is commonly used with Node. Here is how you import a module with RequireJS: var http = require("http"); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is of course importing a HTTP stack module into the code. There is no noise here. Let’s break this down. Scope (1) is provided by the one scoping mechanism in JavaScript: the closure surrounding the module’s code. Whatever scoping mechanism is provided by the language would be fine here. Collision prevention (2) is very elegantly handled. Whereas relocating is an afterthought, and an exceptional measure with namespaces, it is here on the frontline. You always relocate, using an extremely familiar pattern: variable assignment. We are very much used to managing our local variable names and any possible collision will get solved very easily by picking a different name. Wait a minute, I hear some of you say. This is only taking care of collisions on the client-side, on the left of that assignment. What if I have two libraries with the name “http”? Well, You can better qualify the path to the module, which is what the require parameter really is. As for hierarchical organization, you don’t really want that, do you? RequireJS’ module pattern does elegantly cover the bases that namespaces used to cover, but it also promotes additional good practices. First, it promotes usage of self-contained, single responsibility units of code through the closure-based, stricter scoping mechanism. Namespaces are somewhat more porous, as using/import statements can be used bi-directionally, which leads us to my second point… Sane dependency graphs are easier to achieve and sustain with such a structure. With namespaces, it is easy to construct dependency cycles (that’s bad, mmkay?). With this pattern, the equivalent would be to build mega-components, which are an easier problem to spot than a decay into inter-dependent namespaces, for which you need specialized tools. I really like this pattern very much, and I would like to see more environments implement it. One could argue that dependency injection has some commonalities with this for example. What do you think? This is the half-baked result of some morning shower reflections, and I’d love to read your thoughts about it. What am I missing?

Read the article

What developer conferences are you going to this year?

- by mbcrump

This short list is what I consider to be the “cream-of-the-crop” in developer conferences. This is also a list of the conferences that I plan on attending in 2011. If you feel your conference is just as good, then shoot me an email at [michael[at]michaelcrump[dot]net, and if possible I will check it out. In-Person Event Las Vegas on April 18th-22nd, 2011 Redmond on October 17th-21st, 2011 Orlando on December 5th-9th, 2011 Visual Studio Live – I attended this event in November of last year and blogged about my experience. I am also planning on going back to the Orlando session in December of this year. So what did I like the most about this event? Being able to interact one-on-one with a majority of the speakers. If you read my blog post then you will see a list of the speakers that I met up with. I also made a lot of great connections with other professional developers all over the world. They are having an event in Las Vegas on April 18th-22nd. I noticed at this event that they have added a new track on mobile. Being a big fan of mobile, I feel that this is a great move. They also have a great selection for Silverlight Developers including Billy Hollis and Rocky Lhotka. For the full lineup of conference tracks, sessions and speakers visit http://bit.ly/VSLiveTrks. If you are interested in this then you can register here by February 16th. I must add that you can save $300 bucks by getting the early-bird special. Virtual Conference SSWUG (DBTechCon) - holds the largest virtual conference in the information technology industry. It is also special to me because they selected a majority of my Silverlight content for the April conference. No traveling fees and all of the sessions are recorded so you can watch them on-demand for $189 bucks (early-bird special). For the entire speaker list then click here. The session list has also been published. If you are interested in this then you can register here. In-Person Event Knoxville, TN on June 3rd/4th 2011. Codestock.org – If you live in the South then you have heard of CodeStock. To my knowledge, they have only had 3 events so far and they were a huge success. It was such a success that after the last event, everyone was telling me how good it was and how much they enjoyed it. They currently have a call for speakers going on right now, so if you have sessions then be sure to submit yours. So, what makes them stand out? Well for starters Michael Neal (organizer) developed an open API so conference attendees could build their own apps for the sessions. They also encouraged their speakers to go to other sessions instead of stay in a “speaker-room”. Another cool feature is that they are uploading videos from the conference so everyone can benefit. They are currently looking for sponsorship, so help out if you can. In-Person Event Redmond, WA on October 28/29 2011 *NOT 100% SURE AT THIS POINT* PDC 11 – OK, so the logo should be pdc11 but its not out yet. This event is located on Microsoft’s campus in Redmond, WA. It is probably one of the most well known conferences for developers to attend. One of the big perks from this event is that you typically come away with free stuff. In 2010 they gave away Windows 7 Phones. I remember years earlier they gave away laptops. This of course isn’t the only reason to go, you may get to tour the Microsoft campus. Since pdc is a huge event, you can view all the events for free. Mike Taulty created a nice Silverlight application that consumes the OData feed. You can download it here. If everything goes as planned, I will be at all of these events. If you plan on going then send me a tweet and we will do lunch or dinner. I love meeting new developers and talking .net. Subscribe to my feed

Read the article

Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) is Available Now !

- by Anand Akela

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle today announced the availability of Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2). It is now available for download on OTN on ALL platforms. This is the first major release since the launch of Enterprise Manager 12c in October of 2011. This is the first time when Enterprise Manager release is available on all platforms simultaneously. This is primarily a stability release which incorporates many of issues and feedback reported by early adopters. In addition, this release contains many new features and enhancements in areas across the board. New Capabilities and Features Enhanced management capabilities for enterprise private clouds: Introduces new capabilities to allow customers to build and manage a Java Platform-as-a-Service (PaaS) cloud based on Oracle Weblogic Server. The new capabilities include guided set up of PaaS Cloud, self-service provisioning, automatic scale out and metering and chargeback. Enhanced lifecycle management capabilities for Oracle WebLogic Server environments: Combining in-context multiple domain, patching and configuration file synchronizations. Integrated Hardware-Software management for Oracle Exalogic Elastic Cloud through features such as rack schematics visualization and integrated monitoring of all hardware and software components. The latest management capabilities for business-critical applications include: Business Application Management: A new Business Application (BA) target type and dashboard with flexible definitions provides a logical view of an application’s business transactions, end-user experiences and the cloud infrastructure the monitored application is running on. Enhanced User Experience Reporting: Oracle Real User Experience Insight has been enhanced to provide reporting capabilities on client-side issues for applications running in the cloud and has been more tightly coupled with Oracle Business Transaction Management to help ensure that real-time user experience and transaction tracing data is provided to users in context. Several key improvements address ease of administration, reporting and extensibility for massively scalable cloud environments including dynamic groups, self-updateable monitoring templates, bulk operations against many events, etc. New and Revised Plug-Ins: Several plug-Ins have been updated as a part of this release resulting in either new versions or revisions. Revised plug-ins contain only bug-fixes and while new plug-ins incorporate both bug fixes as well as new functionality. Plug-In Name Version Enterprise Manager for Oracle Database 12.1.0.2 (revision) Enterprise Manager for Oracle Fusion Middleware 12.1.0.3 (new) Enterprise Manager for Chargeback and Capacity Planning 12.1.0.3 (new) Enterprise Manager for Oracle Fusion Applications 12.1.0.3 (new) Enterprise Manager for Oracle Virtualization 12.1.0.3 (new) Enterprise Manager for Oracle Exadata 12.1.0.3 (new) Enterprise Manager for Oracle Cloud 12.1.0.4 (new) Installation and Upgrade: All major platforms have been released simultaneously (Linux 32 / 64 bit, Solaris (SPARC), Solaris x86-64, IBM AIX 64-bit, and Windows x86-64 (64-bit) ) Enterprise Manager 12.1.0.2 is a complete release that includes both the EM OMS and Agent versions of 12.1.0.2. Installation options available with EM 12.1.0.2: User can do fresh Install or an upgrade from versions EM 10.2.0.5, 11.1, or 12.1.0.2 ( Bundle Patch 1 not mandatory). Upgrading to EM 12.1.0.2 from EM 12.1.0.1 is not a patch application (similar to Bundle Patch 1) but is achieved through a 1-system upgrade. Documentation: Oracle Enterprise Manager Cloud Control Introduction Document provides a broad overview of capabilities and highlights"What's New" in EM 12.1.0.2. All updated Oracle Enterprise Manager documentation can be found on OTN Upgrade Guide Please feel free to ask questions related to the new Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) at the Oracle Enterprise Manager Forum . You could also share your feedback at twitter using hash tag #em12c or at Facebook . Stay Connected: Twitter | Face book | You Tube | Linked in | Newsletter

Read the article

Upgrading to Code Based Migrations EF 4.3.1 with Connector/Net 6.6

- by GABMARTINEZ

Entity Framework 4.3.1 includes a new feature called code first migrations. We are adding support for this feature in our upcoming 6.6 release of Connector/Net. In this walk-through we'll see the workflow of code-based migrations when you have an existing application and you would like to upgrade to this EF 4.3.1 version and use this approach, so you can keep track of the changes that you do to your database. The first thing we need to do is add the new Entity Framework 4.3.1 package to our application. This should via the NuGet package manager. You can read more about why EF is not part of the .NET framework here. Adding EF 4.3.1 to our existing application Inside VS 2010 go to Tools -> Library Package Manager -> Package Manager Console, this will open the Power Shell Host Window where we can work with all the EF commands. In order to install this library to your existing application you should type Install-Package EntityFramework This will make some changes to your application. So Let's check them. In your .config file you'll see a <configSections> which contains the version you have from EntityFramework and also was added the <entityFramework> section as shown below. This section is by default configured to use SQL Express which won't be necesary for this case. So you can comment it out or leave it empty. Also please make sure you're using the Connector/Net 6.6.x version which is the one that has this support as is shown in the previous image. At this point we face one issue; in order to be able to work with Migrations we need the __MigrationHistory table that we don't have yet since our Database was created with an older version. This table is used to keep track of the changes in our model. So we need to get it in our existing Database. Getting a Migration-History table into an existing database First thing we need to do to enable migrations in our existing application is to create our configuration class which will set up the MySqlClient Provider as our SQL Generator. So we have to add it with the following code: using System.Data.Entity.Migrations; //add this at the top of your cs file public class Configuration : DbMigrationsConfiguration<NameOfYourDbContext> //Make sure to use the name of your existing DBContext { public Configuration() { this.AutomaticMigrationsEnabled = false; //Set Automatic migrations to false since we'll be applying the migrations manually for this case. SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator()); } } This code will set up our configuration that we'll be using when executing all the migrations for our application. Once we have done this we can Build our application so we can check that everything is fine. Creating our Initial Migration Now let's add our Initial Migration. In Package Manager Console, execute "add-migration InitialCreate", you can use any other name but I like to set this as our initial create for future reference. After we run this command, some changes were done in our application: A new Migrations Folder was created. A new class migration call InitialCreate which in most of the cases should have empty Up and Down methods as long as your database is up to date with your Model. Since all your entities already exists, delete all duplicated code to create any entity which exists already in your Database if there is any. I found this easier when you don't have any pending updates to do to your database. Now we have our empty migration that will make no changes in our database and represents how are all the things at the begining of our migrations. Finally, let's create our MigrationsHistory table. Optionally you can add SQL code to delete the edmdata table which is not needed anymore. public override void Up() { // Just make sure that you used 4.1 or later version Sql("DROP TABLE EdmMetadata"); } From our Package Manager Console let's type: Update-database; If you like to see the operations made on each Update-database command you can use the flag -verbose after the Update-database. This will make two important changes. It will execute the Up method in the initial migration which has no changes in the database. And second, and very important, it will create the __MigrationHistory table necessary to keep track of your changes. And next time you make a change to your database it will compare the current model to the one stored in the Model Column of this table. Conclusion The important thing of this walk through is that we must create our initial migration before we start doing any changes to our model. This way we'll be adding the necessary __MigrationsHistory table to our existing database, so we can keep our database up to date with all the changes we do in our context model using migrations. Hope you have found this information useful. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community. Happy MySQL/Net Coding!

Read the article

jQuery Templates, Data Link

- by Renso

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Query Templates, Data Link, and Globalization I am sure you must have read Scott Guthrie’s blog post about jQuery support and officially supporting jQuery's templating, data linking and globalization, if not here it is: jQuery Templating Since we are an open source shop and use jQuery and jQuery plugins extensively to say the least, decided to look into the templating a bit and see what data linking is all about. For those not familiar with those terms here is the summary, plenty of material out there on what it is, but here is what in my experience it means: jQuery Templating: A templating engine that allows you to specify a client-side template where you indicate which properties/tags you want dynamically updated. You in a sense specify which parts of the html is dynamic and since it is pluggable you are able to use tools data jQuery data linking and others to let it sync up your template with data. What makes it more powerful is that you can easily work with rows of data, adding and removing rows. Once the template has been generated, which you do dynamically on a client-side event, you then append/inject the resulting template somewhere in your DOM, like for example you would get a JSON object from the database, map it to your template, it populates the template with your data in the indicated places, and then let’s say for example append it to a row in a table. I have not found it that useful for lets say a single record of data since you could easily just get a partial view from the server via an html type ajax call. It really shines when you dynamically add/remove rows from a list in the DOM. I have not found an alternative that meets the functionality of the jQuery template and helps of course that Microsoft officially supports it. In future versions of the jQuery plug-in it may even ship as part of the standard jQuery library and with future versions of Visual Studio. jQuery Data Linking: In short I was fascinated by it initially by how with one line of code I can sync up my JSON object with my form elements. That's where my enthusiasm stopped. It was one-line to let is deal with syncing up your form with your JSON object, but it is not bidirectional as they state and I tried all the work arounds they suggested and none of them work. The problem is that when you update your JSON object it DOES NOT sync it up with your form. In an example, accounts are being edited client side by selecting the account from a list by clicking on the row, it then fetches the entire account JSON object via ajax json-type call and then refreshes the form with the account’s details from the new JSON object. What is the use of syncing up my JSON with the form if I still have to programmatically sync up my new JSON object with each DOM property?! So you may ask: “what is the alternative”? Good question and the same one I was pondering, maybe I can just use it for keeping my from n sync with my JSON object so I can post that JSON object back to the server and update my database. That’s when I discovered Knockout: Knockout It addresses the issues mentioned above and also supports event handling through the observer pattern. Not wanting to go into detail here, Steve Sanderson, the creator of Knockout, has already done a terrific job of that, thanks Steve for a great plug-in! Best of all it integrates perfectly with the jQuery Templating engine as well. I have not found an alternative to this plugin that supports the depth and width of functionality and would recommend it to anyone. The only drawback is the embedded html attributes (data-bind=””) tags that you have to add to the HTML, in my opinion tying your behavior to your HTML, where I like to separate behavior from HTML as well as CSS, so the HTML is purely to define content, not styling or behavior. But there are plusses to this as well and also a nifty work around to this that I will just shortly mention here with an example. Instead of data binding an html tag with knockout event handling like so: <%=Html.TextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> Do: <%=Html.DataBoundTextBox("PrepayDiscount", String.Empty, new { @class = "number" })%> The html extension above then takes care of the internals and you could then swap Knockout for something else if you want to inside the extension and keep the HTML plugin agnostic. Here is what the extension looks like, you can easily build a whole library to support all kinds of data binding options from this: public static class HtmlExtensions { public static MvcHtmlString DataBoundTextBox(this HtmlHelper helper, string name, object value, object htmlAttributes) { var dic = new RouteValueDictionary(htmlAttributes); dic.Add("data-bind", String.Format("value: {0}", name)); return helper.TextBox(name, value, dic); } } Hope this helps in making a decision when and where to consider jQuery templating, data linking and Knockout.

Read the article

Hiring New IT Employees versus Promoting Internally for IT Positions

Recently I was asked my opinion regarding the hiring of IT professionals in regards to the option of hiring new IT employees versus promoting internally for IT positions. After thinking a little more about this question regarding staffing, specifically pertaining to promoting internally verses new employees; I think my answer to this question is that it truly depends on the situation. However, in most cases I would side with promoting internally. The key factors in this decision should be based on a company/department’s current values, culture, attitude, and existing priorities. For example if a company values retaining all of its hard earned business knowledge then they would tend to promote existing employees internal over hiring a new employee. Moreover, the company will have to pay to train an existing employee to learn a new technology and the learning curve for some technologies can be very steep. Conversely, if a company values new technologies and technical proficiency over business knowledge then a company would tend to hire new employees because they may already have experience with a technology that the company is planning on using. In this scenario, the company would have to take on the additional overhead of allowing a new employee to learn how the business operates prior to them being fully effective. To illustrate my points above let us look at contractor that builds in ground pools for example. He has the option to hire employees that are very strong but use small shovels to dig, or employees weak in physical strength but use large shovels to dig. Which employee should the contractor use to dig a hole for a new in ground pool? If we compare the possible candidates for this job we will find that they are very similar to hiring someone internally verses a new hire. The first example represents the existing workers that are very strong regarding the understanding how the business operates and the reasons why in a specific manner. However this employee could be potentially weaker than an outsider pertaining to specific technologies and would need some time to build their technical prowess for a new position much like the strong worker upgrading their shovels in order to remove more dirt at once when digging. The other employee is very similar to hiring a new person that may already have the large shovel but will need to increase their strength in order to use the shovel properly and efficiently so that they can move a maximum amount of dirt in a minimal amount of time. This can be compared to new employ learning how a business operates before they can be fully functional and integrated in the company/department. Another key factor in this dilemma pertains to existing employee and their passion for their work, their ability to accept new responsibility when given, and the willingness to take on responsibilities when they see a need in the business. As much as possible should be considered in this decision down to the mood of the team, the quality of existing staff, learning cure for both technology and business, and the potential side effects of the existing staff. In addition, there are many more consideration based on the current team/department/companies culture and mood. There are several factors that need to be considered when promoting an individual or hiring new blood for a team. They both can provide great benefits as well as create controversy to a group. Personally, staffing especially in the IT world is like building a large scale system in that all of the components and modules must fit together and preform as one cohesive system in the same way a team must come together using their individually acquired skills so that they can work as one team. If a module is out of place or is nonexistent then the rest of the team will suffer until the all of its issues are addressed and resolved. Benefits of Promoting Internally Internal promotions give employees a reason to constantly upgrade their technology, business, and communication skills if they want to further their career Employees can control their own destiny based on personal desires Employee already knows how the business operates Companies can save money by promoting internally because the initial overhead of allowing new hires to learn how a company operates is very expensive Newly promoted employees can assist in training their replacements while transitioning to their new role within a company. Existing employees already have a proven track record in regards fitting in with the business culture; this is always an unknown with all new hires Benefits of a New Hire New employees can energize and excite existing employees New employees can bring new ideas and advancements in technology New employees can offer a different perspective on existing issues based on their past experience. As you can see the decision to promote an existing employee from within a company verses hiring a new person should be based on several factors that should ultimately place the business in the best possible situation for the immediate and long term future. How would you handle this situation? Would you hire a new employee or promote from within?

Read the article

Rebuilding CoasterBuzz, Part II: Hot data objects

- by Jeff

This is the second post, originally from my personal blog, in a series about rebuilding one of my Web sites, which has been around for 12 years. More: Part I: Evolution, and death to WCF After the rush to get moving on stuff, I temporarily lost interest. I went almost two weeks without touching the project, in part because the next thing on my backlog was doing up a bunch of administrative pages. So boring. Unfortunately, because most of the site's content is user-generated, you need some facilities for editing data. CoasterBuzz has a database full of amusement parks and roller coasters. The entities enjoy the relationships that you would expect, though they're further defined by "instances" of a coaster, to define one that has moved between parks as one, with different names and operational dates. And of course, there are pictures and news items, too. It's not horribly complex, except when you have to account for a name change and display just the newest name. In all previous versions, data access was straight SQL. As so much of the old code was rooted in 2003, with some changes in 2008, there wasn't much in the way of ORM frameworks going on then. Let me rephrase that, I mostly wasn't interested in ORM's. Since that time, I used a little LINQ to SQL in some projects, and a whole bunch of nHibernate while at Microsoft. Through all of that experience, I have to admit that these frameworks are often a bigger pain in the ass than not. They're great for basic crud operations, but when you start having all kinds of exotic relationships, they get difficult, and generate all kinds of weird SQL under the covers. The black box can quickly turn into a black hole. Sometimes you end up having to build all kinds of new expertise to do things "right" with a framework. Still, despite my reservations, I used the newer version of Entity Framework, with the "code first" modeling, in a science project and I really liked it. Since it's just a right-click away with NuGet, I figured I'd give it a shot here. My initial effort was spent defining the context class, which requires a bit of work because I deviate quite a bit from the conventions that EF uses, starting with table names. Then throw some partial querying of certain tables (where you'll find image data), and you're splitting tables across several objects (navigation properties). I won't go into the details, because these are all things that are well documented around the Internet, but there was a minor learning curve there. The basics of reading data using EF are fantastic. For example, a roller coaster object has a park associated with it, as well as a number of instances (if it was ever relocated), and there also might be a big banner image for it. This is stupid easy to use because it takes one line of code in your repository class, and by the time you pass it to the view, you have a rich object graph that has everything you need to display stuff. Likewise, editing simple data is also, well, simple. For this goodness, thank the ASP.NET MVC framework. The UpdateModel() method on the controllers is very elegant. Remember the old days of assigning all kinds of properties to objects in your Webforms code-behind? What a time consuming mess that used to be. Even if you're not using an ORM tool, having hydrated objects come off the wire is such a time saver. Not everything is easy, though. When you have to persist a complex graph of objects, particularly if they were composed in the user interface with all kinds of AJAX elements and list boxes, it's not just a simple matter of submitting the form. There were a few instances where I ended up going back to "old-fashioned" SQL just in the interest of time. It's not that I couldn't do what I needed with EF, it's just that the efficiency, both my own and that of the generated SQL, wasn't good. Since EF context objects expose a database connection object, you can use that to do the old school ADO.NET stuff you've done for a decade. Using various extension methods from POP Forums' data project, it was a breeze. You just have to stick to your decision, in this case. When you start messing with SQL directly, you can't go back in the same code to messing with entities because EF doesn't know what you're changing. Not really a big deal. There are a number of take-aways from using EF. The first is that you write a lot less code, which has always been a desired outcome of ORM's. The other lesson, and I particularly learned this the hard way working on the MSDN forums back in the day, is that trying to retrofit an ORM framework into an existing schema isn't fun at all. The CoasterBuzz database isn't bad, but there are design decisions I'd make differently if I were starting from scratch. Now that I have some of this stuff done, I feel like I can start to move on to the more interesting things on the backlog. There's a lot to do, but at least it's fun stuff, and not more forms that will be used infrequently.

Read the article

BizTalk 2009 - Custom Functoid Wizard

- by StuartBrierley

When creating BizTalk maps you may find that there are times when you need perform tasks that the standard functoids do not cover. At other times you may find yourself reapeating a pattern of standard functoids over and over again, adding visual complexity to an otherwise simple process. In these cases you may find it preferable to create your own custom functoids. In the past I have created a number of custom functoids from scratch, but recently I decided to try out the Custom Functoid Wizard for BizTalk 2009. After downloading and installing the wizard you should start Visual Studio and select to create a new BizTalk Server Functoid Project. Following the splash screen you will be presented with the General Properties screen, where you can set the classname, namespace, assembly name and strong name key file. The next screen is the first set of properties for the functoid. First of all is the fuctoid ID; this must be a value above 6000. You should also then set the name, tooltip and description of the functoid. The name will appear in the visual studio toolbox and the tooltip on hover over in the toolbox. The descrition will be shown when you configure the functoid inputs when using it in a map; as such it should provide a decent level of information to allow the functoid to be used. Next you must set the category, exception mesage, icon and implementation language. The category will affect the positioning of the functoid within the toolbox and also some of the behaviours of the functoid. We must then define the parameters and connections for our new functoid. Here you can define the names and types of your input parameters along with the minimum and maximum number of input connections. You will also need to define the types of connections accepted and the output type of the functoid. Finally you can click finish and your custom functoid project will be created. The results of this process can be seen in the solution explorer, where you will see that a project, functoid class file and a resource file have been created for you. If you open the class file you will see that the following code has been created for you: The "base" function sets all the properties that you previsouly detailed in the custom functoid wizard. public TestFunctoids():base() { int functoidID; // This has to be a number greater than 6000 functoidID = System.Convert.ToInt32(resmgr.GetString("FunctoidId")); this.ID = functoidID; // Set Resource strings, bitmaps SetupResourceAssembly(ResourceName, Assembly.GetExecutingAssembly()); SetName("FunctoidName"); SetTooltip("FunctoidToolTip"); SetDescription("FunctoidDescription"); SetBitmap("FunctoidBitmap"); // Minimum and maximum parameters that the functoid accepts this.SetMinParams(2); this.SetMaxParams(2); /// Function name that needs to be called when this Functoid is invoked. /// Put this in GAC. SetExternalFunctionName(GetType().Assembly.FullName, "MyCompany.BizTalk.Functoids.TestFuntoids.TestFunctoids", "Execute"); // Category for this functoid. this.Category = FunctoidCategory.String; // Input and output Connection type this.OutputConnectionType = ConnectionType.AllExceptRecord; AddInputConnectionType(ConnectionType.AllExceptRecord); } The "Execute" function provides a skeleton function that contains the code to be executed by your new functoid. The inputs and outputs should match those you defined in the Custom Functoid Wizard. public System.Int32 Execute(System.Int32 Cool) { ResourceManager resmgr = new ResourceManager(ResourceName, Assembly.GetExecutingAssembly()); try { // TODO: Implement Functoid Logic } catch (Exception e) { throw new Exception(resmgr.GetString("FunctoidException"), e); } } Opening the resource file you will see some of the various string values that you defined in the Custom Functoid Wizard - Name, Tooltip, Description and Exception. You can also select to look at the image resources. This will display the embedded icon image for the functoid. To change this right click the icon and select "Import from File". Once you have completed the skeleton code you can then look at trying out your functoid. To do this you will need to build the project, copy the compiled DLL to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions and then refresh the toolbox in visual studio.

Read the article

How to Implement Single Sign-On between Websites

- by hmloo

Introduction Single sign-on (SSO) is a way to control access to multiple related but independent systems, a user only needs to log in once and gains access to all other systems. a lot of commercial systems that provide Single sign-on solution and you can also choose some open source solutions like Opensso, CAS etc. both of them use centralized authentication and provide more robust authentication mechanism, but if each system has its own authentication mechanism, how do we provide a seamless transition between them. Here I will show you the case. How it Works The method we’ll use is based on a secret key shared between the sites. Origin site has a method to build up a hashed authentication token with some other parameters and redirect the user to the target site. variables Status Description ssoEncode required hash(ssoSharedSecret + , + ssoTime + , + ssoUserName) ssoTime required timestamp with format YYYYMMDDHHMMSS used to prevent playback attacks ssoUserName required unique username; required when a user is logged in Note : The variables will be sent via POST for security reasons Building a Single Sign-On Solution Origin Site has function to 1. Create the URL for your Request. 2. Generate required authentication parameters 3. Redirect to target site. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { string postbackUrl = "http://www.targetsite.com/sso.aspx"; string ssoTime = DateTime.Now.ToString("yyyyMMddHHmmss"); string ssoUserName = User.Identity.Name; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string ssoHash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); string value = string.Format("{0}:{1},{2}", ssoHash,ssoTime, ssoUserName); Response.Clear(); StringBuilder sb = new StringBuilder(); sb.Append("<html>"); sb.AppendFormat(@"<body onload='document.forms[""form""].submit()'>"); sb.AppendFormat("<form name='form' action='{0}' method='post'>", postbackUrl); sb.AppendFormat("<input type='hidden' name='t' value='{0}'>", value); sb.Append("</form>"); sb.Append("</body>"); sb.Append("</html>"); Response.Write(sb.ToString()); Response.End(); } } Target Site has function to 1. Get authentication parameters. 2. Validate the parameters with shared secret. 3. If the user is valid, then do authenticate and redirect to target page. 4. If the user is invalid, then show errors and return. using System; using System.Web.Security; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { if (User.Identity.IsAuthenticated) { Response.Redirect("~/Default.aspx"); } } if (Request.Params.Get("t") != null) { string ticket = Request.Params.Get("t"); char[] delimiters = new char[] { ':', ',' }; string[] ssoVariable = ticket.Split(delimiters, StringSplitOptions.None); string ssoHash = ssoVariable[0]; string ssoTime = ssoVariable[1]; string ssoUserName = ssoVariable[2]; DateTime appTime = DateTime.MinValue; int offsetTime = 60; // get this from config or similar try { appTime = DateTime.ParseExact(ssoTime, "yyyyMMddHHmmss", null); } catch { //show error return; } if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } bool isValid = false; string ssoSharedSecret = "58ag;ai76"; // get this from config or similar string hash = FormsAuthentication.HashPasswordForStoringInConfigFile(string.Format("{0},{1},{2}", ssoSharedSecret, ssoTime, ssoUserName), "md5"); if (string.Compare(ssoHash, hash, true) == 0) { if (Math.Abs(appTime.Subtract(DateTime.Now).TotalSeconds) > offsetTime) { //show error return; } else { isValid = true; } } if (isValid) { //Do authenticate; } else { //show error return; } } else { //show error } } } Summary This is a very simple and basic SSO solution, and its main advantage is its simplicity, only needs to add a single page to do SSO authentication, do not need to modify the existing system infrastructure.

Read the article

Business Case for investing time developing Stubs and BizUnit Tests

- by charlie.mott

I was recently in a position where I had to justify why effort should be spent developing Stubbed Integration Tests for BizTalk solutions. These tests are usually developed using the BizUnit framework. I assumed that most seasoned BizTalk developers would consider this best practice. Even though Microsoft suggest use of BizUnit on MSDN, I've not found a single site listing the justifications for investing time writing stubs and BizUnit tests. Stubs Stubs should be developed to isolate your development team from external dependencies. This is described by Michael Stephenson here. Failing to do this can result in the following problems: In contract-first scenarios, the external system interface will have been defined. But the interface may not have been setup or even developed yet for the BizTalk developers to work with. By the time you open the target location to see the data BizTalk has sent, it may have been swept away. If you are relying on the UI of the target system to see the data BizTalk has sent, what do you do if it fails to arrive? It may take time for the data to be processed or it may be scheduled to be processed later. Learning how to use the source\target systems and investigations into where things go wrong in these systems will slow down the BizTalk development effort. By the time the data is visible in a UI it may have undergone further transformations. In larger development teams working together, do you all use the same source and target instances. How do you know which data was created by whose tests? How do you know which event log error message are whose? Another developer may have “cleaned up” your data. It is harder to write BizUnit tests that clean up the data\logs after each test run. What if your B2B partners' source or target system cannot support the sort of testing you want to do. They may not even have a development or test instance that you can work with. Their single test instance may be used by the SIT\UAT teams. There may be licencing costs of setting up an instances of the external system. The stubs I like to use are generic stubs that can accept\return any message type. Usually I need to create one per protocol. They should be driven by BizUnit steps to: validates the data received; and select a response messages (or error response). Once built, they can be re-used for many integration tests and from project to project. I’m not saying that developers should never test against a real instance. Every so often, you still need to connect to real developer or test instances of the source and target endpoints\services. The interface developers may ask you to send them some data to see if everything still works. Or you might want some messages sent to BizTalk to get confidence that everything still works beyond BizTalk. Tests Automated “Stubbed Integration Tests” are usually built using the BizUnit framework. These facilitate testing of the entire integration process from source stub to target stub. It will ensure that all of the BizTalk components are configured together correctly to meet all the requirements. More fine grained unit testing of individual BizTalk components is still encouraged. But BizUnit provides much the easiest way to test some components types (e.g. Orchestrations). Using BizUnit with the Behaviour Driven Development approach described by Mike Stephenson delivers the following benefits: source: http://biztalkbddsample.codeplex.com – Video 1. Requirements can be easily defined using Given/When/Then Requirements are close to the code so easier to manage as features and scenarios Requirements are defined in domain language The feature files can be used as part of the documentation The documentation is accurate to the build of code and can be published with a release The scenarios are effective to document the scenarios and are not over excessive The scenarios are maintained with the code There’s an abstraction between the intention and implementation of tests making them easier to understand The requirements drive the testing These same tests can also be used to drive load testing as described here. If you don't do this ... If you don't follow the above “Stubbed Integration Tests” approach, the developer will need to manually trigger the tests. This has the following risks: Developers are unlikely to check all the scenarios each time and all the expected conditions each time. After the developer leaves, these manual test steps may be lost. What test scenarios are there? What test messages did they use for each scenario? There is no mechanism to prove adequate test coverage. A test team may attempt to automate integration test scenarios in a test environment through the triggering of tests from a source system UI. If this is a replacement for BizUnit tests, then this carries the following risks: It moves the tests downstream, so problems will be found later in the process. Testers may not check all the expected conditions within the BizTalk infrastructure such as: event logs, suspended messages, etc. These automated tests may also get in the way of manual tests run on these environments.

Read the article

High Availability for IaaS, PaaS and SaaS in the Cloud

- by BuckWoody

Outages, natural disasters and unforeseen events have proved that even in a distributed architecture, you need to plan for High Availability (HA). In this entry I'll explain a few considerations for HA within Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS) and Software-as-a-Service (SaaS). In a separate post I'll talk more about Disaster Recovery (DR), since each paradigm has a different way to handle that. Planning for HA in IaaS IaaS involves Virtual Machines - so in effect, an HA strategy here takes on many of the same characteristics as it would on-premises. The primary difference is that the vendor controls the hardware, so you need to verify what they do for things like local redundancy and so on from the hardware perspective. As far as what you can control and plan for, the primary factors fall into three areas: multiple instances, geographical dispersion and task-switching. In almost every cloud vendor I've studied, to ensure your application will be protected by any level of HA, you need to have at least two of the Instances (VM's) running. This makes sense, but you might assume that the vendor just takes care of that for you - they don't. If a single VM goes down (for whatever reason) then the access to it is lost. Depending on multiple factors, you might be able to recover the data, but you should assume that you can't. You should keep a sync to another location (perhaps the vendor's storage system in another geographic datacenter or to a local location) to ensure you can continue to serve your clients. You'll also need to host the same VM's in another geographical location. Everything from a vendor outage to a network path problem could prevent your users from reaching the system, so you need to have multiple locations to handle this. This means that you'll have to figure out how to manage state between the geo's. If the system goes down in the middle of a transaction, you need to figure out what part of the process the system was in, and then re-create or transfer that state to the second set of systems. If you didn't write the software yourself, this is non-trivial. You'll also need a manual or automatic process to detect the failure and re-route the traffic to your secondary location. You could flip a DNS entry (if your application can tolerate that) or invoke another process to alias the first system to the second, such as load-balancing and so on. There are many options, but all of them involve coding the state into the application layer. If you've simply moved a state-ful application to VM's, you may not be able to easily implement an HA solution. Planning for HA in PaaS Implementing HA in PaaS is a bit simpler, since it's built on the concept of stateless applications deployment. Once again, you need at least two copies of each element in the solution (web roles, worker roles, etc.) to remain available in a single datacenter. Also, you need to deploy the application again in a separate geo, but the advantage here is that you could work out a "shared storage" model such that state is auto-balanced across the world. In fact, you don't have to maintain a "DR" site, the alternate location can be live and serving clients, and only take on extra load if the other site is not available. In Windows Azure, you can use the Traffic Manager service top route the requests as a type of auto balancer. Even with these benefits, I recommend a second backup of storage in another geographic location. Storage is inexpensive; and that second copy can be used for not only HA but DR. Planning for HA in SaaS In Software-as-a-Service (such as Office 365, or Hadoop in Windows Azure) You have far less control over the HA solution, although you still maintain the responsibility to ensure you have it. Since each SaaS is different, check with the vendor on the solution for HA - and make sure you understand what they do and what you are responsible for. They may have no HA for that solution, or pin it to a particular geo, or perhaps they have a massive HA built in with automatic load balancing (which is often the case). All of these options (with the exception of SaaS) involve higher costs for the design. Do not sacrifice reliability for cost - that will always cost you more in the end. Build in the redundancy and HA at the very outset of the project - if you try to tack it on later in the process the business will push back and potentially not implement HA. References: http://www.bing.com/search?q=windows+azure+High+Availability (each type of implementation is different, so I'm routing you to a search on the topic - look for the "Patterns and Practices" results for the area in Azure you're interested in)

Read the article

Soft lockup after upgrade - cannot install from live CD

- by nbm

I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

Read the article

Profiling NetBeans 7.0 Beta 2 and Reporting Problems

- by christopher.jones

With NetBeans 7.0 recently going into Beta 2 phase, now is the time to test it out properly and report issues. The development team has been squashing bugs, including memory issues with the PHP bundle.There are some great new PHP related features in NetBeans 7.0, so you know you want to try it out.If you identify something wrong with NetBeans, please report it following the guidelines http://wiki.netbeans.org/IssueReportingGuidelinesDepending on the issues, data to attach to the report is mentioned on: http://wiki.netbeans.org/FaqLogMessagesFile and http://wiki.netbeans.org/FaqProfileMeNowIf you have a memory issue then a memory dump would also be useful. Run the jmap tool for this. There is some background information on http://wiki.netbeans.org/FaqMemoryDump. Here's how I used it.First I set my environment to match the JDK used by NetBeans. In my case I am using a nightly build so the JDK is in the configuration file under $HOME/netbeans-dev-201102210501:$ egrep netbeans_jdkhome $HOME/netbeans-dev-201102210501/etc/netbeans.conf netbeans_jdkhome="/home/cjones/src/jdk1.6.0_24" $ export JAVA_HOME=/home/cjones/src/jdk1.6.0_24 $ export PATH=$JAVA_HOME/bin:$PATH Next, I found the correct process number to examine:$ ps -ef | egrep 'netbeans|jdk'cjones 23230 1 0 16:07 ? 00:00:00 /bin/bash /home/cjones/netbeans-cjones 23438 23230 2 16:07 ? 00:00:09 /home/cjones/src/jdk1.6.0_24/binFinally I used the parent JDK process as the jmap argument:$ jmap -histo:live 23438 num #instances #bytes class name---------------------------------------------- 1: 12075 9028656 [I 2: 49535 6581920 <constMethodKlass> 3: 49535 3964128 <methodKlass> 4: 80256 3840776 <symbolKlass> 5: 36093 3635336 [C 6: 5095 3341312 <constantPoolKlass> 7: 5095 2486016 <instanceKlassKlass> 8: 4325 1961432 <constantPoolCacheKlass> 9: 18729 1763976 [B 10: 59952 1438848 java.util.HashMap$Entry . . .This histogram memory report will help identify the kind of memory issues you are seeing. It may not be as complete as an often tens of megabyte jmap -dump:live,file=/tmp/nbheap.log 23438 heap dump, but is much more easily attached to a bug report.If you want to keep up to date with NetBeans, nightly builds are at: http://bits.netbeans.org/download/trunk/nightly/latest/zip/

Read the article

Why Executives Need Enterprise Project Portfolio Management: 3 Key Considerations to Drive Value Across the Organization

- by Melissa Centurio Lopes

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} By: Guy Barlow, Oracle Primavera Industry Strategy Director Over the last few years there has been a tremendous shift – some would say tectonic in nature – that has brought project management to the forefront of executive attention. Many factors have been driving this growing awareness, most notably, the global financial crisis, heightened regulatory environments and a need to more effectively operationalize corporate strategy. Executives in India are no exception. In fact, given the phenomenal rate of progress of the country, top of mind for all executives (whether in finance, operations, IT, etc.) is the need to build capacity, ramp-up production and ensure that the right resources are in place to capture growth opportunities. This applies across all industries from asset-intensive – like oil & gas, utilities and mining – to traditional manufacturing and the public sector, including services-based sectors such as the financial, telecom and life sciences segments are also part of the mix. However, compounding matters is a complex, interplay between projects – big and small, complex and simple – as companies expand and grow both domestically and internationally. So, having a standardized, enterprise wide solution for project portfolio management is natural. Failing to do so is akin to having two ERP systems, one to manage “large” invoices and one to manage “small” invoices. It makes no sense and provides no enterprise wide visibility. Therefore, it is imperative for executives to understand the full range of their business commitments, the benefit to the company, current performance and associated course corrections if needed. Irrespective of industry and regardless of the use case (e.g., building a power plant, launching a new financial service or developing a new automobile) company leaders need to approach the value of enterprise project portfolio management via 3 critical areas: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Cambria","serif";} 1. Greater Financial Discipline – Improve financial rigor and results through better governance and control is an imperative given today’s financial uncertainty and greater investment scrutiny. For example, as India plans a US$1 trillion investment in the country’s infrastructure how do companies ensure costs are managed? How do you control cash flow? Can you easily report this to stakeholders? 2. Improved Operational Excellence – Increase efficiency and reduce costs through robust collaboration and integration. Upwards of 66% of cost variances are driven by poor supplier collaboration. As you execute initiatives do you have visibility into the performance of your supply base? How are they integrated into the broader program plan? 3. Enhanced Risk Mitigation – Manage and react to uncertainty through improved transparency and contingency planning. What happens if you’re faced with a skills shortage? How do you plan and account for geo-political or weather related events? In summary, projects are not just the delivery of a product or service to a customer inside a predetermined schedule; they often form a contractual and even moral obligation to shareholders and stakeholders alike. Hence the intimate connection between executives and projects, with the latter providing executives with the platform to demonstrate that their organization has the capabilities and competencies needed to meet and, whenever possible, exceed their customer commitments. Effectively developing and operationalizing corporate strategy is the hallmark of successful executives and enterprise project and portfolio management allows them to achieve this goal. Article was first published for Manage India, an e-newsletter, PMI India.

Read the article

ADF Business Components

- by Arda Eralp

ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive. ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application

Read the article

Application Composer: Exposing Your Customizations in BI Analytics and Reporting

- by Richard Bingham

Introduction This article explains in simple terms how to ensure the customizations and extensions you have made to your Fusion Applications are available for use in reporting and analytics. It also includes four embedded demo videos from our YouTube channel (if they don't appear check the browser address bar for a blocking shield icon). If you are new to Business Intelligence consider first reviewing our getting started article, and you can read more about the topic of custom subject areas in the documentation book Extending Sales. There are essentially four sections to this post. First we look at how custom fields added to standard objects are made available for reporting. Secondly we look at creating custom subject areas on the standard objects. Next we consider reporting on custom objects, starting with simple standalone objects, then child custom objects, and finally custom objects with relationships. Finally this article reviews how flexfields are exposed for reporting. Whilst this article applies to both Cloud/SaaS and on-premises deployments, if you are an on-premises developer then you can also use the BI Administration Tool to customize your BI metadata repository (the RPD) and create new subject areas. Whilst this is not covered here you can read more in Chapter 8 of the Extensibility Guide for Developers. Custom Fields on Standard Objects If you add a custom field to your standard object then it's likely you'll want to include it in your reports. This is very simple, since all new fields are instantly available in the "[objectName] Extension" folder in existing subject areas. The following two minute video demonstrates this. Custom Subject Areas for Standard Objects You can create your own subject areas for use in analytics and reporting via Application Composer. An example use-case could be to simplify the seeded subject areas, since they sometimes contain complex data fields and internal values that could confuse business users. One thing to note is that you cannot create subject areas in a sandbox, as it is not supported by BI, so once your custom object is tested and complete you'll need to publish the sandbox before moving forwards. The subject area creation processes is essentially two-fold. Once the request is submitted the ADF artifacts are generated, then secondly the related metadata is sent to the BI presentation server API's to make the updates there. One thing to note is that this second step may take up to ten minutes to complete. Once finished the status of the custom subject area request should show as 'OK' and it is then ready for use. Within the creation processes wizard-like steps there are three concepts worth highlighting: Date Flattening - this feature permits the roll up of reports at various date levels, such as data by week, month, quarter, or year. You simply check the box to enable it for that date field. Measures - these are your own functions that you can build into the custom subject area. They are related to the field data type and include min-max for dates, and sum(), avg(), and count() for numeric fields. Implicit Facts - used to make the BI metadata join between your object fields and the calculated measure fields. The advice is to choose the most frequently used measure to ensure consistency. This video shows a simple example, where a simplified subject area is created for the customer 'Contact' standard object, picking just a few fields upon which users can then create reports. Custom Objects Custom subject areas support three types of custom objects. First is a simple standalone custom object and for which the same process mentioned above applies. The next is a custom child object created on a standard object parent, and finally a custom object that is related to a parent object - usually through a dynamic choice list. Whilst the steps in each of these last two are mostly the same, there are differences in the way you choose the objects and their fields. This is illustrated in the videos below.The first video shows the process for creating a custom subject area for a simple standalone custom object. This second video demonstrates how to create custom subject areas for custom objects that are of parent:child type, as well as those those with dynamic-choice-list relationships. <span id="XinhaEditingPostion"></span> Flexfields Dynamic and Extensible Flexfields satisfy a similar requirement as custom fields (for Application Composer), with flexfields common across the Fusion Financials, Supply Chain and Procurement, and HCM applications. The basic principle is when you enable and configure your flexfields, in the edit page under each segment region (for both global and context segments) there is a BI Enabled check box. Once this is checked and you've completed your configuration, you run the Scheduled Process job named 'Import Oracle Fusion Data Extensions for Transactional Business Intelligence' to generate and migrate the related BI artifacts and data. This applies for dynamic, key, and extensible flexfields. Of course there is more to consider in terms of how you wish your flexfields to be implemented and exposed in your reports, and details are given in Chapter 4 of the Extending Applications guide.

Read the article

What do the participants say about the Open Day in South Africa?

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 On the 26th of September, a group of students who were specifically selected to attend an Open day at Oracle South Africa, joined us at our offices in Woodmead, Johannesburg. The Conference room was filled with inquisitive minds. What we had in store for them was a detailed presentation about Oracle which was delivered by Zuko - Cluster Leader: Tech GB South Africa. The student’s many questions were all answered especially when we started addressing the opportunities we have and detailed information on our Graduate Programme. Our employees then came to talk about their experience. This allowed all the students to have an integrated learning experience. By inviting the students to walk around our Oracle Offices allowed them to see, talk, experience a bit of the culture and ask more questions. Here is some of the feedback from the attendees: Maxwell Moloi: “The open day truly served its purpose and exceeded expectations in the sense that I got to find out more about Oracle and all the different opportunities it has to offer. The fact that Oracle supplies a full solution to a customer and not just part of it and how the company manages to setup professional development for their employees is what entices me to want to join the rapidly growing team of Oracle.” Nqobile Mabaso: “I found the open day to be quite informative and enlightening because coming from a marketing background I could apply the knowledge I got from varsity to the Company I was able to point out what they do as part of their corporate social responsibility (Oracle recently partnered with the department of education to build a school), how Oracle emphasizes on relationship building because they know they sell to people and not companies and how they offer the full stack of solutions which gives them a competitive advantage over their competitors.” Nondumiso Mvelase: “The Open Day was a wonderful experience for me especially because I have never been part of an Open Day before, so it was absolutely amazing for me. It gave me a good idea of how it is to be part of Oracle. We were served with lovely breakfast and lunch which I enjoyed. I wish the Open Day went on for a whole week. Seeing and hearing from 2013 Graduates, telling us about their experience within Oracle was very inspiring to me. They were encouraging us to work hard if we ever got the opportunity they had. After hearing this from them I will definitely not take it for granted.” Itumeleng Moraka: “Before I walked into the Oracle offices all that was in my mind was databases and cloud storage. I was then surrounded by passionate, enthusiastic and welcoming employees. I came across a positive energy within the multinational company. I realized that Oracle is not a company that operates in survival mode. This may sound idealistic, but they operate in a non-traditional way investing more into innovation, they stay focused on what matters most about where technology is going and at the same time they are not losing sight of how their products make a difference in the world.” For more information on how to be part of the Oracle Graduate Programme please follow us on Facebook! https://www.facebook.com/CampusAtOracle /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Synergy - easy share of keyboard and mouse between multiple computers

Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

Read the article

CS, SE, HCI, Information Science, Please recommendation for further education of the former performing art manager seeking career in IT industries? [on hold]

- by Baek Seungjoo

IT specialists there J Thank you very much for your collective efforts here, and I got huge help reading your professional comments and advices on each questions I have searched so far! This time, I would like to ask for your practical advices or recommendation on what I am struggling on at this moment. I am currently seeking higher education for my career transition from performing art manager and director to “IT software and/or service development and management specialist”. However, as this field is quite new to me, and there are lots of different work positions, I have no idea which grad major I better pursue in order to get qualification. Of course I know this question could sounds wired as it is kind of personal choice. But my lack of understanding on how IT software companies work in general, your practical and experience-based advice will be great help to me, who spent more than two months of self-research on net. OK. Before my question, here is my plan and history, which are quite different from those currently in IT industry I think… 1) Target Firstly, get career transition into IT service or products companies and get experiences. Eventually, pursue IT entrepreneurship in combination with my arts and cultural production and business expertise. 2) Background Career: performing arts director and manager in theatre-based scale opera and musical Art education in youth BA in literature and Chinese studies (Art & Humanities) MA in Cultural & Creative Industries (Art & Humanities) – dissertation with focus on digital prosumption and the lived experience of the prosumer. (a qualitative research on the agents in the digital world) 2) Personally Huge interest in IT hardware and software, and their trend. Skills to build up, repair, tune PCs -of course this is no more than personal hobby, but shows my interests in this field. 4) Problem Encounter a question “So, what do you think you can contribute practically in this position”. This question turn me down everytime I go through job interviews, and I decided more education in the relevant area. Here are my questions. 1) In terms of work positions in IT software companies, I wonder if I can put the comparison of what “Artists” is to “Arts Manager or Director” is what “Developer” is to “Product Manager”. (Of course, this stereotypical division of Artist-Art Manager is out of sense because the domain overlaps to some extent, and is blurring at least in my field, and they are in different contexts, but just speaking easily.) Normally, artist comes with special arts educations, and they live in their own world of artistic inspiration and creation, and they feel alive in practice and on stages. Meanwhile, from the point of staging and managing productions, the role of art manager is critical as well. Our role cares how the production appeals to the audience in effective way, how to make profit and future sustainable management through that, how to set up future strategy in consideration of the external conditions such as political and social circumstances, audience trend and level, other production trends from on-going and historical perspectives, how and what the production make voice to the society from political, economic, humanitarian stances. So, we need keen eyes on economic, political, and societal environment, have to understand human-being and their desires, must know how to make presentation and attract investors, must have sense in managing and fighting over the limited financial resource, how to extend networking and so on. It is common that the two agents create productions in collaboration (normally not in that ideal way but in conflict and fight though J ). So, we need to know each other’s expertise to some extent, for better production. What are the work positions in IT software industries equivalent to the role of “art manager” in performing arts? From my view, considering developers come with special education in the world of computer science, software engineering, or others (self-education sometimes), and they express themselves with the arts of coding, computer languages on the black screen, and make sort of their artistic production online to the audience, I guess there might be someone who collaborate with developers in creating, managing, and launching IT services or products. 2) Which education among CS, SE, HCI, Information Science, is needed for those seeking such work position? Especially for person like me. (At this moment, Information Science has the highest possibility to get in, since I lack Calculus and Math in undergrad educaiton. But please let me know irrespective of this concern, I think there are ways to back it up if CS or SE education needed in my case) 3) Which field between Information Science and HCI can be more practical background regarding job hungting? And which of them have more demands in job market? AS I checked, HCI is more close to CS than IS in its focus of study area. Thank you very much for your patience reading such a long inquiry, and I appreciate to your efforts in advance. Have a nice day in this beautiful summer.

Read the article

Examine your readiness for managing Enterprise Private Cloud

- by Anand Akela

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Cloud computing promises to deliver greater agility to meet demanding business needs, operational efficiencies, and lower cost. However these promises cannot be realized and enterprises may not be able to get the best value out of their enterprise private cloud computing infrastructure without a comprehensive cloud management solution . Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Take this new self-assessment quiz that measures the readiness of your enterprise private cloud. It scores your readiness in the following areas and discover where and how you can improve to gain total cloud control over your enterprise private cloud. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Complete Cloud Lifecycle Solution Check if you are ready to manage all phases of the building, managing, and consuming an enterprise cloud. You will learn how Oracle can help build and manage a rich catalog of cloud services – whether it is Infrastructure-as-a-Service, Database-as-a-Service, or Platform-as-a-Service, all from a single product. Integrated Cloud Stack Management Integrated management of the entire cloud stack – all the way from application to disk, is very important to eliminate the integration pains and costs that customers would have to otherwise incur by trying to create a cloud environment by integrating multiple point solutions. Business-Driven Clouds It is critical that an enterprise Cloud platform is not only able to run applications but also has deep business insight and visibility. Oracle Enterprise Manager 12c enables creation of application-aware and business-driven clouds that has deep insight into applications, business services and transactions. As the leading providers of business applications and the middleware, we are able to offer you a cloud solution that is optimized for business services. Proactive Management Integration of the enterprise cloud infrastructure with support can allow cloud administrators to benefit from Automatic Service Requests (ASR), proactive patch recommendations, health checks and end-of-life advisory for all of the technology deployed within cloud. Learn more about solution for Enterprise Cloud and Cloud management by attending various sessions , demos and hand-on labs at Oracle Open World 2012 . Stay Connected: Twitter | Face book | You Tube | Linked in | Newsletter

Read the article

What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12

- by Richard Lefebvre

There is plenty to SEE for CRM during OpenWorld in San Francisco, September 30 - October 4! Here are some of the sessions in the CRM Track that you might want to consider attending for products you currently own or might consider for the future. I think you'll agree, there is quite a bit of investment going on across Oracle CRM. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. General Session: Oracle Fusion CRM—Improving Sales Effectiveness, Efficiency, and Ease of Use (Session ID: GEN9674) - Oct 2, 11:45 AM - 12:45 PM. Anthony Lye, Senior VP, Oracle leads this general session focused on Oracle Fusion CRM. Oracle Fusion CRM optimizes territories, combines quota management and incentive compensation, integrates sales and marketing, and cleanses and enriches data—all within a single application platform. Oracle Fusion can be configured, changed, and extended at runtime by end users, business managers, IT, and developers. Oracle Fusion CRM can be used from the Web, from a smartphone, from Microsoft Outlook, or from an iPad. Deloitte, sponsor of the CRM Track, will also present key concepts on CRM implementations. Oracle Fusion Customer Relationship Management: Overview/Strategy/Customer Experiences/Roadmap (CON9407) - Oct 1, 3:15PM - 4:15PM. In this session, learn how Oracle Fusion CRM enables companies to create better sales plans, generate more quality leads, and achieve higher win rates and find out why customers are adopting Oracle Fusion CRM. Gain a deeper understanding of the unique capabilities only Oracle Fusion CRM provides, and learn how Oracle’s commitment to CRM innovation is driving a wide range of future enhancements. Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM - 11:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Siebel CRM Overview, Strategy, and Roadmap (CON9700) - Oct 1, 12:15PM - 1:15PM. The world’s most complete CRM solution, Oracle’s Siebel CRM helps organizations differentiate their businesses. Come to this session to learn about the Siebel product roadmap and how Oracle is committed to accelerating the pace of innovation and value for its customers on this platform. Additionally, the session covers how Siebel customers can leverage many Oracle assets such as Oracle WebCenter Sites; InQuira, RightNow, and ATG/Endeca applications, and Oracle Policy Automation in conjunction with their current Siebel investments. Oracle Fusion Social CRM Strategy and Roadmap: Future of Collaboration and Social Engagement (CON9750) - Oct 4, 11:15 AM - 12:15 PM. Social is changing the customer experience! Come find out how Oracle can help you know your customers better, encourage brand affinity, and improve collaboration within your ecosystem. This session reviews Oracle’s social media solution and shows how you can discover hidden insights buried in your enterprise and social data. Also learn how Oracle Social Network revolutionizes how enterprise users work, collaborate, and share to achieve successful outcomes. Oracle CRM On Demand Strategy and Roadmap (CON9727) - Oct 1, 10:45AM - 11:45AM. Oracle CRM On Demand is a powerful cloud-based customer relationship management solution. Come to this session to learn directly from Oracle experts about future product plans and hear how Oracle is committed to accelerating the pace of innovation and value to its customers. Knowledge Management Roadmap and Strategy (CON9776) - Oct 1, 12:15PM - 1:15PM. Learn how to harness the knowledge created as a natural byproduct of day-to-day interactions to lower costs and improve customer experience by delivering the right answer at the right time across channels. This session includes an overview of Oracle’s product roadmap and vision for knowledge management for both the Oracle RightNow and Oracle Knowledge (formerly InQuira) product families. Oracle Policy Automation Roadmap: Supercharging the Customer Experience (CON9655) - Oct 1, 12:15PM - 1:15PM. Oracle Policy Automation delivers rapid customer value by streamlining the capture, analysis, and deployment of policies across every facet of the customer experience. This session discusses recent Oracle Policy Automation enhancements for policy analytics; the latest Oracle Policy Automation Connector for Siebel; and planned new capabilities, including availability with the Oracle RightNow product line. There is much more, so stay tuned for more highlights or check out the Content Catalog and search for your areas of interest.

Read the article

Oracle Cloud Applications: The Right Ingredients Baked In

- by yaldahhakim

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Oracle Cloud Applications: The Right Ingredients Baked In Eggs, flour, milk, and sugar. The magic happens when you mix these ingredients together. The same goes for the hottest technologies fast changing how IT impacts our organizations today: cloud, social, mobile, and big data. By themselves they’re pretty good; combining them with a great recipe is what unlocks real transformation power. Choosing the right cloud can be very similar to choosing the right cake. First consider comparing the core ingredients that go into baking a cake and the core design principles in building a cloud-based application. For instance, if flour is the base ingredient of a cake, then rich functionality that spans complete business processes is the base of an enterprise-grade cloud. Cloud computing is more than just consuming an "application as service", and having someone else manage it for you. Rather, the value of cloud is about making your business more agile in the marketplace, and shortening the time it takes to deliver and adopt new innovation. It’s also about improving not only the efficiency at which we communicate but the actual quality of the information shared as well. Data from different systems, like ingredients in a cake, must also be blended together effectively and evaluated through a consolidated lens. When this doesn’t happen, for instance when data in your sales cloud doesn't seamlessly connect with your order management and other “back office” applications, the speed and quality of information can decrease drastically. It’s like mixing ingredients in a strainer with a straw – you just can’t bring it all together without losing something. Mixing ingredients is similar to bringing clouds together, and co-existing cloud applications with traditional on premise applications. This is where a shared services platform built on open standards and Service Oriented Architecture (SOA) is critical. It’s essentially a cloud recipe that calls for not only great ingredients, but also ingredients you can get locally or most likely already have in your kitchen (or IT shop.) Open standards is the best way to deliver a cost effective, durable application integration strategy – regardless of where your apps are deployed. It’s also the best way to build your own cloud applications, or extend the ones you consume from a third party. Just like using standard ingredients and tools you already have in your kitchen, a standards based cloud enables your IT resources to ensure a cloud works easily with other systems. Your IT staff can also make changes using tools they are already familiar with. Or even more ideal, enable business users to actually tailor their experience without having to call upon IT for help at all. This frees IT resources to focus more on developing new innovative services for the organization vs. run and maintain. Carrying the cake analogy forward, you need to add all the ingredients in before you bake it. The same is true with a modern cloud. To harness the full power of cloud, you can’t leave out some of the most important ingredients and just layer them on top later. This is what a lot of our niche competitors have done when it comes to social, mobile, big data and analytics, and other key technologies impacting the way we do business. The transformational power of these technology trends comes from having a strategy from the get-go that combines them into a winning recipe, and delivers them in a unified way. In looking at ways Oracle’s cloud is different from other clouds – not only is breadth of functionality rich across functional pillars like CRM, HCM, ERP, etc. but it embeds social, mobile, and rich intelligence capabilities where they make the most sense across business processes. This strategy enables the Oracle Cloud to uniquely deliver on all three of these dimensions to help our customers unlock the full power of these transformational technologies.

Search Results

Search found 17579 results on 704 pages for 'mercurial build'.

Page 651/704 | < Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658 | Next Page >

- by juanlarios

- by Shay Shmeltzer

- by PointsToShare

- by Bertrand Le Roy

- by mbcrump

- by Anand Akela

- by GABMARTINEZ

- by Renso

- by Jeff

- by StuartBrierley

- by hmloo

- by charlie.mott

- by BuckWoody

- by nbm

- by christopher.jones

- by Melissa Centurio Lopes

- by Arda Eralp

- by Richard Bingham

- by Maria Sandu

- by Baek Seungjoo

- by Anand Akela

- by Richard Lefebvre

- by yaldahhakim

< Previous Page | 647 648 649 650 651 652 653 654 655 656 657 658 | Next Page >