Search Results

Search found 53148 results on 2126 pages for 'ubuntu 9 10'.

Page 655/2126 | < Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >

  • Internal hard drive, can't format

    - by user113923
    I cannot format anymore the hard drive of my laptop. Here is how I proceed: I am starting my computer with a USB live drive (Ubuntu 10.04 LTS - the Lucid Lynx). Then I start disk utility and try to format the hard drive - I choosed to format the Master boot record but I get the following error: Error creating partition table: helper exited with exit code 1: Error calling fsync(2) on /dev/sda: Input/output error If I try to delete partitions I get the following error Error erasing: helper exited with exit code 1: In part_del_partition: device_file=/dev/sda, offset=32256 Entering MS-DOS parser (offset=0, size=30005821440) MSDOS_MAGIC found looking at part 0 (offset 32256, size 4096157184, type 0x83) new part entry looking at part 1 (offset 10618836480, size 8414461440, type 0x83) new part entry looking at part 2 (offset 19033297920, size 1077511680, type 0x82) new part entry looking at part 3 (offset 20110809600, size 9895011840, type 0x07) new part entry Exiting MS-DOS parser MSDOS partition table detected got it got disk got partition - part-type=0 Error: Input/output error during write on /dev/sda ped_disk_commit_to_dev() failed If I try to install ubuntu frrom the usb on the hard drive and choose erase and use the entire disk I get the error message Input/output error during write on /dev/sda For side infos I have at the moment 4 partitions on my hard drive: /dev/sda1 (ext2) /dev/sda2 (ext2) /dev/sda3 (swap) /dev/sda1 (ntfs) + /dev/sda (unlocated Space) My ultimate goal is to reinstall ubuntu and have only 2 partitions... I would really appreciate any help here! Thanks JB

    Read the article

  • Bad archive mirror using PXE boot method

    - by user11566
    I'm trying to automatically install Ubuntu on a client PC by using the PXE BOOT method....my Objectives are below: I am following the steps given in this link installation using PXE BOOT the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server I have installed DHCP3-server,Apache2 and TFTP to help me with the installation. I have nearly achieved my first objective, I am able to boot my client using the files stored in the server but during the installation stage it is asking me to CHOOSE A MIRROR OF UBUNTU ARCHIVE I gave the server's IP address and the path in the server where the files are located but then its giving me this error BAD ARCHIVE MIRROR So is it possible that instead of downloading all the files from the internet and storing them on my disk can I use the files which comes with the UBUNTU-CD, and how to store these files in what format (should I zip them) on the disk? secondly I am also generating the ks.cfg which I wanted to give to the client for automatic installation of the OS. So how should the configuration file be given to the installation process?

    Read the article

  • Unity 3D does not work on Dell system with a AMD Radeon HD 6470M

    - by VeeKay
    I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

    Read the article

  • Why nautilus quicklist is not working?

    - by jasmines
    None of my bookmarks (Documents, Pictures, Download, Dropbox, Ubuntu One, Music, Public) are correctly shown but they won't open if I right click on the Home icon and select them. The only ones who work are Home and Open A New Window. I've read similar questions (http://askubuntu.com/questions/184504/unity-home-quicklist-not-working-when-nautilus-is-closed and unity home quicklist not working) but my problem seems different... Anyway I can't solve with the suggested workarounds. $ ls ~ Audiobooks Dropbox Modelli Pubblici Video Backup dvdrip-data Musica Scaricati VirtualBox VMs deja-dup grive Pictures - GT-I9100 Scrivania virtual-drives Documenti Immagini Podcasts Ubuntu One Vuze Downloads $ cat /usr/share/applications/nautilus.desktop [Desktop Entry] Name=Files Comment=Access and organize files Exec=nautilus %U Icon=system-file-manager Terminal=false Type=Application StartupNotify=true OnlyShowIn=GNOME;Unity; Categories=GNOME;GTK;Utility;Core; MimeType=inode/directory;application/x-gnome-saved-search; X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=nautilus X-GNOME-Bugzilla-Component=general X-GNOME-Bugzilla-Version=3.4.2 Actions=Window; X-Ubuntu-Gettext-Domain=nautilus [Desktop Action Window] Name=Open a New Window Exec=nautilus OnlyShowIn=Unity;

    Read the article

  • Cannot establish Wired connection on Acer Aspire 5930G

    - by drakos46
    I use an Acer Aspire 5930G, dual booted with Windows 7 and Ubuntu 13.10. My problem is that i cannot establish wired connection on my ubuntu. Wireless connection works in both of my OSs but the Wired connection does not, only on the Ubuntu. I have already tried the common fix: echo on | sudo tee /sys/class/net/eth0/device/power/control but without any results. Any ideas? eth0 Link encap:Ethernet HWaddr 00:1d:72:c2:21:a5 inet6 addr: fe80::21d:72ff:fec2:21a5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:945 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:204318 (204.3 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:7241 errors:0 dropped:0 overruns:0 frame:0 TX packets:7241 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:645874 (645.8 KB) TX bytes:645874 (645.8 KB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:57:7b:cc inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::216:eaff:fe57:7bcc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19937 errors:0 dropped:0 overruns:0 frame:0 TX packets:16933 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10877245 (10.8 MB) TX bytes:3131378 (3.1 MB) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16)

    Read the article

  • How to build the mainline kernel source package?

    - by Maxime R.
    Ubuntu kernel PPA only provides linux-headers*.deb and linux-image*.deb packages. How can I build the corresponding linux-source*.deb package ? Context: I'm currently running Ubuntu 11.10 with the mainline kernel (3.2 rc6 now) to get a better support for my sandybridge IGP (Dell E6420 laptop with intel i5-2520M CPU). Appears, i'd like to install this touchpad driver, ALPS touchpads being badly supported (see previous link bug report), while waiting for upstream support in kernel version 3.3. Problem is, DKMS keeps complaining about not finding the full kernel source: Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. Appears I may not need the full source but I'd still like to try having it installed to see if it solve my problem. What I tried : Uncompressing the kernel.org source archive in /usr/src/. DKMS still complaining. Manually updating the kernel source package with uupdate and the mainline source package like explained here. Did not succeed. Manually building the linux-source package following @roadmr and @elmicha instructions. I eventually succeeded to build it but DKMS still complained about the missing source. At last I noticed an error I did not catch in the first place while reinstalling the kernel headers. Appears the .deb I got may have been corrupted, downloading it again did the trick :) Alas, while DKMS agreed to compile the module i ran into the following error which appears to have already been reported. This issue isn't yet solved but I won't try to because of the following: in the end I decided to test the precise kernel version 3.2-rc6 through the xorg-edgers ppa which appears to be correctly patched: it works. Nevertheless, it might still be of some interest to know how to build the mainline linux-source package as the Ubuntu Kernel Team doesn't provide it. Not to mention that I learned a lot in the process ^^

    Read the article

  • White screen with pointer after removing Unity

    - by Sameer Pandit
    I have the same problem . I am a newbie. I added the repository with sudo add apt-get-repository ppa:canonical-dx-team/une then i went to ubuntu software center and installed "unity interface of ubuntu netbook edition" . after installing i found a problem with User interface as it kept on flashing when mouse points to side panel . so i decided to remove it . I removed it form Ubuntu software center . there were other unity related apps installed , but i did not remove then as i had no idea what they were about . Now i ended up with a blank white screen with mouse pointer whenever i login. though i m able to login using gdm , but the screen is blank white. I tried to these commands also sudo apt-get remove gnome-shell sudo apt-get remove unity sudo restart gdm but they did not work at all i also tried sudo dpkg-reconfigure xserver-xorg it too did not work. Note:I donot have any sort of graphics card or video card on my pc please help !!!

    Read the article

  • Booting Error while using 12.04 booting from GRUB

    - by Paul Z.
    my name is Paul. I have encountered an issue relating to GRUB booting and the booting process in general. I have been running Ubuntu 12.04 LTS on my machine for quite a while. Before that, i had (before) 10.04, 11.04, 11.10, etc. I have been running Ubuntu, in general, but more specifically 12.04 for a long time with little to no problems. The problem: Earlier today, i was using my machine and then decided to take a little break. I shut down my machine (laptop, in case anyone was wondering) and left. Later, I came back ready to start it up and continue. I started it up and it took me to the Toshiba screen (like normal) then to the GRUB screen. I guessed that nothing was truly wrong, and chose the first option (something around the lines of: Ubuntu, with linux 3.22.0-35-generic). I waited for a bit and it still displayed the same purple screen. I restarted it and now chose the option like the first but with recovery at the end. Same result. Later, I waited longer and found that my computer came up with a bunch of lines of script. I waited longer but nothing new happened. What are your suggestions as to fix this problem? I will let my computer run overnight with the recovery setting and will let you know what the result is. Until then, please help. Thank you, your time and effort is greatly appreciated!

    Read the article

  • How to connect to a wireless network that has a two word name with a space?

    - by grinan
    Ok, I have searched for some time in earnest for an answer to this question. I have a Beagleboard which has Ubuntu 10.10 Minimal install for Arm running on it. With the default install, minimal tools, no GUI, I am unable to connect to my wireless network. The name of my network is "MYNAME NETWORK". Using a text editor to edit /etc/network/interfaces I can not seem to connect at all. As an experiment, I connected to a friends network, which has a one word name "dystek",and was able to connect with Zero issues, and update and install a full GUI for ubuntu Arm. The problem is that I don't want a full blown gui on the beagleboard, just a minimal install of ubuntu with CLI is all I need or want. Is there anyway to connect to my wireless network via editing the /etc/network/interfaces file. Surely there is... I just don't know how. Right now my interfaces file looks like this: auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.1.200 netmask 255.255.255.0 gateway 192.168.1.1 wireless-essid BARRETT NETWORK wireless-key 46456xxxxxxxx Any help would be appreciated.

    Read the article

  • Keyboard-shortcut key-press-detection sensitivity settings

    - by Juve
    last week I switched from Ubuntu 10.10 to 12.04 and after setting up my keyboard shortcuts, e.g., CTRL+ALT+E for my favorite editor and CTRL+ALT+X for the terminal, I noticed that the behavior when pressing the appropriate keys changed somehow. I know this is very subjective and I am not 100% percent sure if I am suddenly just too lazy when using my keyboard, but here is what I noticed: To run your shortcuts, you usually press the modifiers first and in addition press the alphanum key. Now, if I hold the modifiers down very consciously and press the alphanum key afterwards everything works fine. However, I noticed that I may often release the modifiers a bit too early. In Ubuntu 10.10 (metacity/compiz) my keyboard shortcuts would still execute and my tools would pop up. This does not work anymore in 12.04. Nevertheless, I still believe the old behavior to be more intuitive and would like to have it back. I a nutshell: Is there a parameter to control the shortcut-key-press detection behavior? I already searched the ubuntu keyboard options and searched for "keyboard" in gconf-editor but could not find any hints so far.

    Read the article

  • Touchpad stopped working on an Acer AspireOne D255E

    - by Gustavo
    I have a less than a year old Acer AspireOne D255E with a fresh install of Ubuntu 11.10. Everything has been working fine. Great OS and great netbook. But today the touchpad stopped working. It had been working fine. I closed the netbook and when I opened it again, a couple of hours later, I could not move the pointer with the touchpad. I can not get the pointer to move. I cleaned the touchpad surface well, just in case. Everything else is working fine. All the software updates are up-to-date. I have rebooted several times with no solution. I have attached an USB mouse and the pointer works well. What can I do to troubleshoot the problem? I have gone to the System Settings, touchpad section, and there is not much that I can do there. I would like to determine first if it is a hardware or software issue and then how to resolve it. Is there a way that I can reinstall the touchpad drivers. just in case it is a software problem? I have been using Ubuntu for nearly a year now and am very happy with it. Are there any wise Ubuntu gurus out there who can help me? Thank you for reading this note.

    Read the article

  • Incompatible group permissions in Linux - Is it a bug?

    - by Sachin
    I am on Ubuntu 11.04. I am creating another user and placing an existing user in the group of other user, hoping to write in the home directory of other user. # uname -a Linux vini 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 athlon i386 GNU/Linux # whoami sachin # su root # useradd -m -U foo // create user foo # usermod -a -G foo sachin // add user `sachin' to group `foo' # chmod 770 /home/foo/ # exit # whoami sachin # cd /home/foo/ bash: cd: /home/foo/: Permission denied # groups sachin sachin : sachin foo This is totally weird. Though user sachin is in group foo, and group bits for /home/foo/ is set to rwx, sachin can't chdir to /home/foo/. I am not able to understand this. But, if at the exit step, I switch to sachin user from root, this is what happens: # uname -a Linux vini 2.6.38-11-generic #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 i686 athlon i386 GNU/Linux # whoami sachin # su root # useradd -m -U foo // create user foo # usermod -a -G foo sachin // add user `sachin' to group `foo' # chmod 770 /home/foo/ # su sachin # whoami sachin # cd /home/foo/ # ls examples.desktop Now, whatever is happening here is totally incomprehensible. Does su sachin inherits some permissions from the root user at this step? Any explanations would be much appreciated.

    Read the article

  • hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

    - by user108754
    I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

    Read the article

  • 12.04 GPU lockup

    - by soandos
    I was able to install Ubuntu 12.04 using the alternative version of the image, (64 bit) but when I start the system it tells me the GPU locked up, and instead presents a text only screen. I understand that this site is not for bug reports, but at the same time, I know that there are some versions of the installer than have to be compatible with my graphics card (Nvidia GTS 360M). I assumed that the mere fact that the alternative installer ran was an indication that I could get some sort of graphical interface running after the install. Is there some way of getting some type of graphical interface running on my machine? Even better would be is there a way to get the rest of the system running as normal (i.e. GPU up and running)? If an internet connection is required to download driver support or something similar, directions for how to configure a wireless connection with WPA2-Personal protection from the text-only interface (bash). Any help would be appreciated. Note: I was able to find this which tells me that the card is supported. Note 2: In the install software stage of the install, I was unable to install anything (no internet connection) Update: The exact error message is [8.591394] [drm] 0000:01:00.0: GPU Lockup - switching to software fbcon Update 2: If I try to install with the regular version of Ubuntu, the screen goes staticy. This also happens if I install with Wubi (distasteful I know) and then try to use Ubuntu. Update 3: I've tried xforcevesa, nomodeset and xforcevesa nomodeset as my wubi boot options. Update 4: Thanks to jokerdino, I can now connect to the internet, so internet tools would now be a possibility.

    Read the article

  • jungledisk 3.16 doesn't launch

    - by Angelo
    Has anyone had success with jungledisk 3.16 on ubuntu 11.10? I installed it from the .deb file provided by jungledisk. The install goes fine, but I can't get the "jungle disk desktop" app to launch. It appears in the dash search bar, but doesn't launch or do anything upon selecting it. When I try the command line, I get the following... me@myComputer:~$ jungledisk -V -f Verbose mode enabled Shutting down... me@myComputer:~$ What's the deal here? Anybody else experience this? Does anyone have suggestions for what to try? I opened up a help-ticket with jungledisk, but they just asked me for which ubuntu version and which gui I was using and then went silent. I've used jungledisk since 2008 and had no problems. It is sad that it is not working on the new ubuntu for me. Should I just quit them and use dropbox or one? (those seem to be working)

    Read the article

  • javaws crashes, error in ld-linux-x86-64.so.2

    - by user54214
    I am running Ubuntu 11.10 64 bit client as Dom0 and Xen. I am having problems getting java up and running. Java itself seems to work fine, however I get strange errors, for example when I start javaws. I tried different versions and always get the same errors. I tried openjdk 1.6 and 1.7 as well as sunjava6 and 7. I alway get an error in the same lib All other applications are working fine, so it seems ld-linux-x86-64.so.2 is working fine. Any hints what could be wrong? Ubuntu01:~$ javaws # # A fatal error has been detected by the Java Runtime Environment: # # SIGILL (0x4) at pc=0x00007f4e74c5ad10, pid=7974, tid=139974945277696 # # JRE version: 6.0_23-b23 # Java VM: OpenJDK 64-Bit Server VM (20.0-b11 mixed mode linux-amd64 compressedoops) # Derivative: IcedTea6 1.11pre # Distribution: Ubuntu 11.10, package 6b23~pre11-0ubuntu1.11.10.2 # Problematic frame: # C [ld-linux-x86-64.so.2+0x14d10] _dl_make_stack_executable+0x2b70 # # An error report file with more information is saved as: # /home/r/hs_err_pid7974.log # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Aborted

    Read the article

  • How to fix "Disk drive for /boot/efi is not ready or not present"?

    - by N.N.
    After I updated BIOS/UEFI version to 1101 on an Asus P8Z68-V PRO motherboard Ubuntu (11.10) did not boot. After POST all I saw was a black screen with a blinking cursor in the top left corner. I booted an Ubuntu 11.10 live-CD and set the flag for the 20 MB partition before my boot partition to "bios_grub". Then I was able to boot and login. But now every time I boot and Ubuntu loads I get the following message: Disk drive for /boot/efi is not ready or not present. Continue waiting or press s to skip or m for manual recovery. I am able to login if I choose to ignore it by pressing s, but what does this message mean? How can I fix what the message warns about? After logging in I have noticed that /boot/efi is empty. The following forum post speaks of the same issue ubuntuforums.org/showthread.php?t=1893030. Updating to the latest BIOS/UEFI - version 3203, did not have any effect on this issue.

    Read the article

  • Remove unwanted Mount option from Places Menu

    - by Jack
    On Ubuntu 10.10, I added a CIFS network share into /etc/fstab using /media/pub as my mount point. The share becomes visible on the Desktop and under Places (drive icon), which is what I want. But the problem is, Ubuntu 10.10 (unlike 10.04) creates another entry under Places with same name "pub", except this appears to be a mount shortcut rather than another link to the share. When I move my mouse over it says "Mount pub" and if I click on it, it will mount the share and again each time (if already mounted) - it does not display contents of share. In either case, an error pops up soon after "Unable to mount pub - Timeout waiting for mount to appear". The share itself is accessible, but I can't unmount via GUI, system reports its mounted multiple times and I have to unmount via terminal. (sudo umount -a) As I'm mounting the share at boot time, I don't need this manual option under Places. Is there an easy way to stop Ubuntu from listing it under Places? I have tried making the mount point under /mnt, this fixes the problem, except creates another as it removes the drive icon from Desktop and Places. I could create a bookmark, but just wondered if there's an easy fix to this unwanted entry under Places. Thanks

    Read the article

  • NVIDIA Graphics - resolution problems with new 12.04 LTS installation

    - by Daveisuser56810
    I've been trying to install Ubuntu 12.04 LTS on my desktop most of the day. The desktop uses a NVIDIA GEFORCE 9800 (GT I think) graphics card. I am unable to set the correct resolution (1680 x 1050) for the display. The first problem I had was that of the "Black Screen" during install. I overcame this by utilising the "nomodeset" switch on the install options (once I'd found how to do that). The second problem of course was the "Black screen" following the first reboot. Once again this was overcome by using "nomodeset", this time by "editing" the GRUB. This gave me a resolution of 1280x768 which, the Displays GUI allowed me to change to 1280x720 (appears to fit on screen). I then tried to install the NVIDIA drivers. 1) using additional drivers 2) manually by downloading driver and installing in root As soon as NVIDIA drivers are installed - resolution become restricted to 640x480 (max). At this resolution Ubuntu GUI is not usable as most screens are larger than the display. Removing the NVIDIA driver and removing the XORG.CONF file does not lift this restriction. I have tried most things that I have found and that were vaguely intelligible, but nothing appears to get me closer to a resolution of 1680x1050. UPDATE: reinstalled Ubuntu 12-04 and used the "NoModeSet" in the Grub to restore the resolution to 1280x720, which is at least usable. Will live with this for now.

    Read the article

  • Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

    - by Schof
    This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

    Read the article

  • Cannot play windows WMA lossless files on Rhythmbox

    - by sr71
    I have installed Ubuntu 10.10 with all its updates (without Windows) on it’s own drive and everything is working fine. I want to play WMA audio files, also mp3 files. The mp3 files play fine. The WMA files do not play. Used "Rhythmbox Music Player" with and without "Ubuntu-restricted" -extras. Still does not play the lossless windows audio files. I am frustrated with searching to play a WMA file ("download this converter"), but one cannot use this until one "deletes this". I have done everything but it still does not play my windows lossless files that I made from all my CD’s. I am looking for a music player that I can use to play mp3’s and WMA lossless music files and automatically put the album cover on and update the info if one exists. Installation should be as simple as possible. Right now I am back to the original virgin Ubuntu 10.10 with all the recent updates. This computer will do nothing but play music (mp3 and WMA) through a stereo system. I also use Internet to update album info for the music. I do not care what bells and whistles the music player program has, as long as it is an easy install and just plays my mp3 and wma lossless music files. Any help would be appreciated.

    Read the article

  • Make sniqt recognize all tray abilities (or create a working indicator in Qt)

    - by hakermania
    There is this old thread of mine: How do I create a working indicator with Qt/C++? where I was suggested to use the QSystemTray library for making a tray icon in Ubuntu for my application. Sniqt is a program that takes care of the rest. As known, Ubuntu has got rid of tray icons. Instead, it now uses indicators and only indicators. Sniqt converts the Qt tray icons into working indicators. The problem is that it doesn't do a very decent convertion. Actions like single click, middle click etc do not work, while they do in systems that support tray icons. Is there a way to have these actions back? Can I use QSystemTray icon and still have these interesting (and very helpful, in my occasion) actions in Ubuntu? I would be glad to know the answer to the other thread I talked about earlier (how to make a working indicator using the GTK libraries and prevent the crash), as well. Link for Sniqt bug: https://bugs.launchpad.net/sni-qt/+bug/1027652

    Read the article

  • Using 12.04 installation as a persistent pen drive

    - by Cawas
    Disclaimer: I aim to build a self contained pen drive with my application inside, so no matter about updates. Maybe I'm looking at the wrong linux distribution to do this... Please let me know if you think so. I've tried knoppix and even lubuntu, but they don't come with enough "drivers" for Unity3D to work. Creating a custom live persistent pen drive is a real pain and I'm trying for 1 day without any success. Sure, being able to do it would probably be ideal and occupy the minimum space. Using the installation image on a pen drive, however, is good enough and is really easy to create. We can even do it from any OS, using UNetBootin, LiLi USB Creator or some other methods. Straight forward. Some recommend installing it on a pen drive. But that requires a lot of space and, I believe, it won't behave as good as something meant to be installed on a usb disk, because of memory management. So, there are only a few negative points on using the installation image that I can think of. Question here, is how to remove those drawbacks: Having to press "Try Ubuntu". That's the big one. Couldn't find how. Unable to load everything on memory and keep on running without the pen drive (like this) Unable to remove "Install Ubuntu 12.04 LTS" app. Setting the ISO to use maximum amount of space for the OS will leave pen drive with zero space left and any file saved within it from ubuntu is inaccessible from the outside (when plugin the pen drive and not booting from it). Am I missing something? Can those points be fixed?

    Read the article

  • How can I set my resolution to 1280x1024 on an Acer Aspire Revo 3700?

    - by torbengb
    I've just set up a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. Almost everything works OK, but the graphics are not OK: the recommended Nvidia driver is activated but the monitor is not detected, so the resolution is wrong. How can I make Ubuntu detect my monitor? How can I get the proper resolution (1280x1024) in Ubuntu? I know that my monitor is not a CRT but an LCD: it's a BenQ, model T905, with 1280x1024 resolution at 60Hz, connected via a normal VGA cable. DVI or HDMI is not an option. When I go to SystemPrefsMonitors, I get: It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? YES NO If I say NO then I get a window: or for YES I get this: In both cases I don't see that I can fix this problem. The main reason for getting this new computer was that I was sick of having graphics problems on the old one with a very ugly solution that didn't give me hardware support - but at least I got the resultion. Why is this so difficult... sigh!

    Read the article

  • Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

    - by Anthony
    I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

    Read the article

< Previous Page | 651 652 653 654 655 656 657 658 659 660 661 662  | Next Page >