Search Results

Search found 3276 results on 132 pages for 'cost'.

Page 66/132 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• Building a DVR system for use with custom windows application (video analytics)

  - by Michael

  Is there a good PCIe DVR capture card that has at least 4 channels as well as the hardware encoding? It would have to have decent driver support in Windows xp or windows 7. I have looked at various video capture cards as well as an integrated video capture card/motherboard from Huperlabs. But so far I have not found one with a decent review and that has good driver support that I can verify. A really small card would be nice because I am trying to get a fairly small form factor. Huperlabs stuff is pretty awesome but they are slow to get back to me and they bundle their analytics software with the hardware (extra cost for nothing) The dvr is being used for security.

  Read the article

• Packet logging on PIX firewall

  - by georged.id.auindex.htm

  We have a Cisco PIX 515 firewall and I would like to set up a simple logging that would give us a traffic breakdown for billing by: source destination protocol port size time PIX is plugged into Catalyst 2970 and I was told that the best thing since sliced bread for logging is to get Netflow and get Catalyst to log. My concern, however, (besides the Netflow cost) is that I really don't want to "listen" to the internal noise and all I'm interested in are the external traffic stats above for billing and analysis purposes. What would be the simplest and the easiest solution? Cheers George

  Read the article

• Cisco ASA - VPN and Hairpinning....

  - by Nordberg

  Hi, We have 2 sites that will be linked by a IPSEC VPN between 2 Cisco ASAs: Site 1 8Mb ADSL Connection Cisco ASA 505 Site 2 2Mb SDSL Connection Cisco ASA 505 Basically, both sites need access to a service at the end of another IPSEC VPN, Site 3, which I plan to terminate at Site 2. This is due to the way the service is sold - it's billed per gateway. So if both Site 1 and Site 2 had their own VPN connection to Site 3, it would cost us twice as much... Anyway, my idea is to have all traffic from Site 1 destined for Site 3 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 3 has come via Site 2. I understand this is known as hairpinning but I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible and, secondly, can anyone point me in the direction of an example of such a configuration? Many Thanks.

  Read the article

• Amazon RDS Pros/Cons of Multiple DBs per instance

  - by Joe Flowers

  I run two completely independent websites. I am moving their MySQL databases to Amazon RDS. I'm not going to do Multi A/Z deployment - let's remove that variable from this question. I'm not sure whether to create a single RDS instance with two databases, or two Amazon RDS instances with a single database. Ignore cost for the sake of this question. I will not hit the 1 TB data limit so let's ignore that. However, it is extremely important that crashing one of the websites doesn't impact the other. Based on this document - http://docs.amazonwebservices.com/AmazonRDS/latest/UserGuide/Concepts.DBInstance.html I'm assuming that if I write terrible code that crashes one of the databases in a given RDS instance, it could possibly take down the entire RDS instance (and thus inadvertantly affect the other database). Is that correct? Thanks

  Read the article

• Laptop and 2 screens: use screens but not monitor display

  - by ClarkeyBoy

  Hi, I have 1 VGA socket on my laptop, and currently have that in use by a large screen. At some point in the future I would like to get another one of these screens and use both screens in dual screen mode but not use my laptop display (to be honest my laptop display is pretty rubbish as its like 2/3s the size of my screen - even if I had the choice to use all 3 I probably wouldn't want to). Is it possible to achieve this? If so, what do I need by way of hardware / software, and how much do you reckon it should cost me? Thanks in advance. Regards, Richard

  Read the article

• Is there a way to bridge two outgoing TCP connections in order to bypass firewalls and NAT?

  - by TK Kocheran

  We're all familiar with the problem of port-forwarding and NAT: if you want to expose something to accepting an incoming connection, you need to configure port-forwarding on the router or conjure up some other black magickery to "punch holes" in the firewall using UDP or something. I'm fairly new to the whole "hole-punching" concept so could someone explain how it works? Essentially, I'd like to understand how hole-punching would work and the theory behind it, as well as if two TCP connections could be bridged via a third party. Since there's no issue with outgoing TCP connections since it's handled with NAT, could a third party bridge the connections so that the two parties are still connected but without the bandwidth cost of traffic going through the third party?

  Read the article

• What was your most expensive computer rig?

  - by AlbertoPL

  I'm curious as to how much people are willing to spend on a typical computer. My most expensive machine is a gaming rig complete with an ATI Radeon HD4850, Wolfdale 3.0 GHZ Intel Core 2 Duo, 500 Gb hard drive, Antec 900 computer case, the works. I also have a 2-monitor set up. I'd have to say this thing has cost me a little more than a grand at this point, and I'd put the total value of the components at roughly $1300. So, how far have you gone with your computer rigs and has it been worth it?

  Read the article

• Oracle licensing /pricing ?

  - by Quandary

  Question: I'd like to download Oracle 11g database for evaluation purposes. Now I found this link for downloads: http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html But it says one must register 'for accessing premium contents'. But in the same time, it looks like one can download the full database for free. But surely, Oracle doesn't give it for free, but in the registration, there's no mention of any cost/fees, or any billing address. Is this registration free, or as 'premium' suggests, will you get a bill for it if you do (supposed you enter true data) ? Or how does Oracle handle licensing/payment ? I can not see any price tag there anywhere, nor any information on it on that registration page.

  Read the article

• IP KVM switch, or serial console box for remote admin?

  - by grahzny

  We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

  Read the article

• Matte or non-widescreen laptop? Do they exist?

  - by Alan Harris-Reid

  Does anyone know of any matte-screen laptops being sold now (15.6 or 17") in the UK? All I can find is the Dell Vostro 3500/3700 range, but there is a premium of around £200 over the price of their Inspiron range (for the 17" model), and I find it hard justifying the extra cost just to have a matte screen. I do not like glossy screens, but it seems the laptop industry has gone the way of "glossy is better - let's get rid of matte". I have read and heard from other developers that as long as there are no strong light sources to reflect off the screen, one can soon get used to a glossy screen, but I am yet to be convinced. I would also be interested if anyone knows of any non 16:9 screen laptops. I find this ratio too wide and not high-enough for the work I do. 16:10 or lower would be better. Any opinions would be appreciated. Alan

  Read the article

• Can I replace a broken PSU with one of a smaller size?

  - by Carson Myers

  I have a broken OEM power supply unit that is cooked. I'm browsing online to find a replacement and am happy to see that they don't cost too much -- the only thing is they all seem to have varying sizes. Is it a problem if I get a PSU that is smaller than the original one? This is going in an HP Pavillion a000, it's about five and a half years old -- I don't know if that means anything, I just thought there might be some recent standardized dimensions for PSUs or something. No idea.

  Read the article

• MSSQL Auditing Recomendations

  - by Josh Anderson

  As an aspiring DBA, I have recently been asssigned the task of implementing the tracking of all data changes in the database for a peice of software we are developing. After playing with microsoft's change data capture methods, Im looking into some other solutions. We are planing to distribute our product as a hosted solution and unlimited installations would be desired for maximum scalability. Ive looked at IBM's Guardium as well as DB Audit by SoftTree. Im curious if anyone has any solutions they may have used in the past or possibly any suggestions or methods to achieve complete, and of course cost effective, auditing of data changes.

  Read the article

• RAID10 without write-back cache = horrible write performance?

  - by Harry Mexican

  I have just provisioned a dedicated server on singlehop. I'm running it through some tests to know what to expect performance-wise. On the I/O side (with 4 1TB disks in RAID 10) I get: write-cache disabled 200 MB/s read throughput 30 MB/s write throughput I thought that was really low compared to my desktop HD which gets 150-150 or so. So I had a chat with them and they suggested enabling the write cache. New results: write-cache enabled 280 MB/s read 260 MB/s write which is great and all but means I'd have to add a BBU for an additional monthly cost. Is it normal for the write throughput to be 1/4 of a regular drive on RAID10, if you don't have write cache? It almost feels like its intentionally bad to force you to pony up for the BBU. I'd be happy with normal non-raid performance of 150/150.

  Read the article

• Anyone love/hate the PowerConnect line of switches from Dell?

  - by Rob Bergin

  I am looking at replacing some unmanaged 16 port store bought GB switches and wanted to go with Cisco but it may be cost prohibitive. Instead I am looking at ProCurve or Dell's PowerConnect line up. I am looking for SNMP, Management, VLANs, and SFLOW would icing on the switch cupcake. I would get the 6224 or the 6248 and then maybe add the RPS-600 to it for redundant power. I think the RPS-600 supports multiple switches. Rackspace is also a little challenge so I am trying to do it with as little Rack Units as possible. Ideally I would go with two 6224's or a single 6248 and then do two VLANs. Thanks for any feedback. Rob

  Read the article

• Product Recommendation: Good job scheduler for windows servers?

  - by Bret Fisher

  Looking for a mostly-GUI tool that is low cost (less then $1k, but not required) and allows you to create scheduled tasks and jobs without writing vbscript, batch files, or powershell. Something simple that speaks SMB/CIFS, SMTP, LDAP, etc. for such things as "delete some files based on a list of folders from this text file" or "disable all users with expired accounts" or "delete all disabled users not in this AD group". I've seen some of the big multi-OS enterprise task automation systems and they just look way overkill. We're a windows-only shop, Server 2003 or newer and there's got to be a simple non-agent based product that is drag-n-drop for some of this basic automation. Today we use all three languages mentioned above, and the scripts are not as reliable as a workflow-based-tool would be. Thanks.

  Read the article

• Buying Dual Monitors of different size and resolution

  - by rutherford

  I'm about to go choose a dual monitor setup: 1) Is there any reason why I can't just walk out and buy the two TFT screens I like (a wide screen and a 'portrait' screen) and combine them? Mainly wide screen would be for gaming, and portrait for browsing. I'd want the desktop stretching from one to the other (ie drag pointer, apps from one screen to the other) 2) Also do I need separate gfx cards for each monitor or can one cover both? any performance cost? 3) And can I have separate background images for each, seeing as they'll be different resolutions?

  Read the article

• Using "enterprise" switches in home network?

  - by Industrial

  Hi everyone, After more than 12 years working with computers, I am still way behind when it comes to networking, so please bear with me :) As of this Christmas, the number of computers in my home has increased and it's well about time to upgrade the current network hardware in order to offer LAN connection to all computers. Trying to find a cheap solution, A close friend offered me a great deal on a "enterprise-class" Switch from HP (more LAN ports than I would ever need), at the same price as what a brand new Netgear or D-link Switch with 6/8 ports would cost me in retail. Would it be common sense to get this one and start using it immediately and never again have to worry about running out of LAN connections, or am I taking on a bigger bite than what I could chew?

  Read the article

• Hosting provider that allows you to host your own VM image?

  - by Timo Geusch

  I've already looked at the 'Best Hosted VM Provider' question and checked the recommendations there, but I seem to have slightly odd requirements. Basically, I am looking for a host that allows me to host a VM image I supply (FreeBSD, which most of the suggested hosters don't support, they only seem to support various Linuxes) instead of one of their standard images. I'm a long time BSD user and have had colo BSD servers in the past so I'm pretty sure that i don't need much in the way of software support, but I'd basically like to run my server on managed hardware without having to rent the whole server. For the usage I have that would way OTT as we're talking a couple of small apps with very few users, a couple of blogs and (most importantly) email hosting for about 6-10 domains with moderate traffic levels. Oh, and reliability trumps cost to a certain extent.

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick?

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• How to set up an SSL Cert with Subject Alternative Name

  - by Darren Oster

  To test a specific embedded client, I need to set up a web server serving a couple of SSL (HTTPS) sites, say "main.mysite.com" and "alternate.mysite.com". These should be handled by the same certificate, with a Subject Name of "main.mysite.com" and a Subject Alternative Name of "alternate.mysite.com". This certificate needs to be in an authority chain back to a 'proper' CA (such as GoDaddy, to keep the cost down). My question is, are there any good tutorials on how to do this, or can someone explain the process? What sort of parent certificate do I need to purchase from the CA provider? My understanding of SSL certificates is limited, but as Manuel said in Fawlty Towers, "I learn...". I'm happy to work in Windows (IIS) or Linux (Apache) (or even OSX, for that matter). Thanks in advance.

  Read the article

• Adding FK Index to existing table in Merge Replication Topology

  - by Refracted Paladin

  I have a table that has grown quite large that we are replicating to about 120 subscribers. A FK on that table does not have an index and when I ran an Execution Plan on a query that was causing issues it had this to say -- /* Missing Index Details from CaseNotesTimeoutQuerys.sql - mylocal\sqlexpress.MATRIX (WWCARES\pschaller (54)) The Query Processor estimates that implementing the following index could improve the query cost by 99.5556%. */ /* USE [MATRIX] GO CREATE NONCLUSTERED INDEX [<Name of Missing Index, sysname,>] ON [dbo].[tblCaseNotes] ([PersonID]) GO */ I would like to add this but I am afraid it will FORCE a reinitialization. Can anyone verify or validate my concerns? Does it even work that way or would I need to run the script on each subscriber? Any insight would be appreciated.

  Read the article

• Migrate reports from MS Access to OOo Base

  - by John Gardeniers

  I'm currently looking at upgrading our office machines from Office XP to Office 2010. For most users the standard edition is fine but just a few of us use Access. There are only a couple of standalone Access databases but the program is used fairly extensively (mostly by myself) as a front end to MySQL. As the cost different between standard and pro versions of Office 2010 is about $170 (AUD) I'm looking at possible alternatives to Access. I'm no huge fan of Open Office but could be convinced to use it if I can find a way to migrate the many reports we currently have in Access. The data is not a problem. So far I've found nothing to suggest this is even possible/practical but perhaps someone here knows otherwise. I'm also open to suggestions for other alternatives to Access but it must be able to produce flexible reports easily. That is the one real strength of Access in my view. Because of its subjective nature I'm making this community wiki.

  Read the article

• Is it still cheaper to build your own PC?

  - by Jeff Yates

  With many companies offering build-to-order PCs, where they can source components at bulk purchase prices, is there any value in building your own PC. Is it still a good option for everyone or is it only cost-effective for those building fringe equipment like high spec gaming platforms? Don't forget to factor in the time and effort you spend building and configuring the machine. I know that it is often worthwhile as it builds understanding of your machine, gets you exactly what you want, etc., but is it still good for your wallet or would you be better off paying someone else to do it and spend more time doing something else?

  Read the article

• How to configure QoS on home router

  - by Joril

  I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

  Read the article

• How to configure QoS on home router

  - by Joril

  I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >