Search Results

Search found 2702 results on 109 pages for 'delphi units'.

Page 66/109 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

• Setup access to SAS RAID drives with NTFS partitions on CentOS Machine

  - by Quanano

  We have a Dell Poweredge 2900 system with Adaptec 39320A SCSI CONTROLLER CARD and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on the other raid array with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log

  Read the article

• Waterfall Model (SDLC) vs. Prototyping Model

  The characters in the fable of the Tortoise and the Hare can easily be used to demonstrate the similarities and differences between the Waterfall and Prototyping software development models. This children fable is about a race between a consistently slow moving but steadfast turtle and an extremely fast but unreliable rabbit. After closely comparing each character’s attributes in correlation with both software development models, a trend seems to appear in that the Waterfall closely resembles the Tortoise in that Waterfall Model is typically a slow moving process that is broken up in to multiple sequential steps that must be executed in a standard linear pattern. The Tortoise can be quoted several times in the story saying “Slow and steady wins the race.” This is the perfect mantra for the Waterfall Model in that this model is seen as a cumbersome and slow moving. Waterfall Model Phases Requirement Analysis & Definition This phase focuses on defining requirements for a project that is to be developed and determining if the project is even feasible. Requirements are collected by analyzing existing systems and functionality in correlation with the needs of the business and the desires of the end users. The desired output for this phase is a list of specific requirements from the business that are to be designed and implemented in the subsequent steps. In addition this phase is used to determine if any value will be gained by completing the project. System Design This phase focuses primarily on the actual architectural design of a system, and how it will interact within itself and with other existing applications. Projects at this level should be viewed at a high level so that actual implementation details are decided in the implementation phase. However major environmental decision like hardware and platform decision are typically decided in this phase. Furthermore the basic goal of this phase is to design an application at the system level in those classes, interfaces, and interactions are defined. Additionally decisions about scalability, distribution and reliability should also be considered for all decisions. The desired output for this phase is a functional  design document that states all of the architectural decisions that have been made in regards to the project as well as a diagrams like a sequence and class diagrams. Software Design This phase focuses primarily on the refining of the decisions found in the functional design document. Classes and interfaces are further broken down in to logical modules based on the interfaces and interactions previously indicated. The output of this phase is a formal design document. Implementation / Coding This phase focuses primarily on implementing the previously defined modules in to units of code. These units are developed independently are intergraded as the system is put together as part of a whole system. Software Integration & Verification This phase primarily focuses on testing each of the units of code developed as well as testing the system as a whole. There are basic types of testing at this phase and they include: Unit Test and Integration Test. Unit Test are built to test the functionality of a code unit to ensure that it preforms its desired task. Integration testing test the system as a whole because it focuses on results of combining specific units of code and validating it against expected results. The output of this phase is a test plan that includes test with expected results and actual results. System Verification This phase primarily focuses on testing the system as a whole in regards to the list of project requirements and desired operating environment. Operation & Maintenance his phase primarily focuses on handing off the competed project over to the customer so that they can verify that all of their requirements have been met based on their original requirements. This phase will also validate the correctness of their requirements and if any changed need to be made. In addition, any problems not resolved in the previous phase will be handled in this section. The Waterfall Model’s linear and sequential methodology does offer a project certain advantages and disadvantages. Advantages of the Waterfall Model Simplistic to implement and execute for projects and/or company wide Limited demand on resources Large emphasis on documentation Disadvantages of the Waterfall Model Completed phases cannot be revisited regardless if issues arise within a project Accurate requirement are never gather prior to the completion of the requirement phase due to the lack of clarification in regards to client’s desires. Small changes or errors that arise in applications may cause additional problems The client cannot change any requirements once the requirements phase has been completed leaving them no options for changes as they see their requirements changes as the customers desires change. Excess documentation Phases are cumbersome and slow moving Learn more about the Major Process in the Sofware Development Life Cycle and Waterfall Model. Conversely, the Hare shares similar traits with the prototyping software development model in that ideas are rapidly converted to basic working examples and subsequent changes are made to quickly align the project with customers desires as they are formulated and as software strays from the customers vision. The basic concept of prototyping is to eliminate the use of well-defined project requirements. Projects are allowed to grow as the customer needs and request grow. Projects are initially designed according to basic requirements and are refined as requirement become more refined. This process allows customer to feel their way around the application to ensure that they are developing exactly what they want in the application This model also works well for determining the feasibility of certain approaches in regards to an application. Prototypes allow for quickly developing examples of implementing specific functionality based on certain techniques. Advantages of Prototyping Active participation from users and customers Allows customers to change their mind in specifying requirements Customers get a better understanding of the system as it is developed Earlier bug/error detection Promotes communication with customers Prototype could be used as final production Reduced time needed to develop applications compared to the Waterfall method Disadvantages of Prototyping Promotes constantly redefining project requirements that cause major system rewrites Potential for increased complexity of a system as scope of the system expands Customer could believe the prototype as the working version. Implementation compromises could increase the complexity when applying updates and or application fixes When companies trying to decide between the Waterfall model and Prototype model they need to evaluate the benefits and disadvantages for both models. Typically smaller companies or projects that have major time constraints typically head for more of a Prototype model approach because it can reduce the time needed to complete the project because there is more of a focus on building a project and less on defining requirements and scope prior to the start of a project. On the other hand, Companies with well-defined requirements and time allowed to generate proper documentation should steer towards more of a waterfall model because they are in a position to obtain clarified requirements and have to design and optimal solution prior to the start of coding on a project.

  Read the article

• Where is the value of OEA

  - by [email protected]

  In a room full of architects, if you were to ask for the definition of enterprise architecture, or the importance thereof,  you are likely to get a number of varying view points ranging from,  a complete analysis of the digital assets of an organization,  to, a strategic alignment of business goals/objectives to IT initiatives.  Similiarily in a room full of senior business executives,  if you asked them how they see their IT groups and their effectiveness to align to business strategy,  you would get a myriad of responses,  ranging from, “a huge drain on our bottom line”, “always more expensive than budgeted”, “lack of agility,  by the time IT is ready,  my business strategy has changed”, and on the rare occurrence, “ a leader of innovation,  that is lock step with my business strategy”. However does this necessarily demonstrate the overall value of enterprise architecture.  Having a framework, and process is of critical importance to help produce a number of the artefacts that ultimately align technology goals and initiatives to business strategy,  however,  is that really where the value is?  I believe that first we need to understand the concept of value.  Value typically is a measure of sorts,  when we purchase a product it’s value is equivalent to the maximum amount that someone is willing to pay for the product,  however,  is the same equation valid in terms of the business value of enterprise architecture? Is the library of artefacts generated through a process/framework, inclusive of a strategic roadmap to realize the enterprise architecture where the value is? If we agree that enterprise architecture is the alignment of IT and IT assets to support business strategy, and by achieving our business strategy, we have we have increased the business value of the enterprise then;  it seems that, in order to really identify the true value of an enterprise architecture,  we need to understand how we measure business value .  A number of formal measurement methodologies exist for this purpose, business models, balanced scorecards, etc   After we have an understanding on how to measure the business value of each of the organizational units within an enterprise, then we understand how the enterprise architecture contributes to the success of business strategy,  and EXECUTE on the roadmap to implement, and deliver the IT initiatives that provide MEASUREABLE returns, As we analyse the value chain of each of the individual organizational units within the enterprise we may identify how that unit has performed by quantitatively measuring it proximity to achieving the goals defined by the business for each unit. However, It would appear that true business value (the aggregate of all of the business units in the value chain), is to some degree subjectively measured  as for public companies this lies in shareholder value,  as the true value, or be it, the maximum amount that someone would pay for shares of an organization.

  Read the article

• How to resize / enlarge / grow a non-LVM ext4 partition

  - by Mischa

  I have already searched the forums, but couldnt find a good suitable answer: I have an Ubuntu Server 10.04 as KVM Host and a guest system, that also runs 10.04. The host system uses LVM and there are three logical volumes, which are provided to the guest as virtual block devices - one for /, one for /home and one for swap. The guest had been partitioned without LVM. I have already enlarged the logical volume in the host system - the guest successfully sees the bigger virtual disk. However, this virtual disk contains one "good old" partition, which still has the old small size. The output of fdisk -l is me@produktion:/$ LC_ALL=en_US sudo fdisk -l Disk /dev/vda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c8ce7 Device Boot Start End Blocks Id System /dev/vda1 * 1 3917 31455232 83 Linux Disk /dev/vdb: 2147 MB, 2147483648 bytes 244 heads, 47 sectors/track, 365 cylinders Units = cylinders of 11468 * 512 = 5871616 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2bf7 Device Boot Start End Blocks Id System /dev/vdb1 1 366 2095104 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 43, 28) Partition 1 has different physical/logical endings: phys=(260, 243, 47) logical=(365, 136, 44) Disk /dev/vdc: 225.5 GB, 225485783040 bytes 255 heads, 63 sectors/track, 27413 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027f25 Device Boot Start End Blocks Id System /dev/vdc1 1 9138 73398272 83 Linux The output of parted print all is Model: Virtio Block Device (virtblk) Disk /dev/vda: 32.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 32.2GB 32.2GB primary ext4 boot Model: Virtio Block Device (virtblk) Disk /dev/vdb: 2147MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2146MB 2145MB primary linux-swap(v1) Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 What I want to achieve is to simply grow or resize the partition /dev/vdc1 so that it uses the whole space provided by the virtual block device /dev/vdc. The problem is, that when I try to do that with parted, it complains: (parted) select /dev/vdc Using /dev/vdc (parted) print Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 (parted) resize 1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [1049kB]? End? [75.2GB]? 224GB Error: File system has an incompatible feature enabled. Compatible features are has_journal, dir_index, filetype, sparse_super and large_file. Use tune2fs or debugfs to remove features. So what can I do? This is a headless production system. What is a safe way to grow this partition? I CAN unmount it, though - so this is not the problem.

  Read the article

• Fresh Ubuntu Install - Grub not loading

  - by Ryan Sharp

  System Ubuntu 12.04 64-bit Windows 7 SP1 Samsung 64GB SSD - OS' Samsung 1TB HDD - Games, /Home, Swap WD 300'ishGB HDD - Backup Okay, so I'm very frustrated, so please excuse me if I miss anything out as my head is clouded by anger and impatience, etc. I'll try me best, though. First of all, I'll explain how I got to my predicament. I finally got my new SSD. I firstly installed Windows, which completed without a hitch. Afterwards, I tried to install Ubuntu, which failed several times due to problems irrelevant to this question, but I mention this to explain my frustrations, sorry. Anyway, I finally installed Ubuntu. However, I chose the 'bootloader' to be installed on the same partition as where I was installing the Ubuntu Root partition, as that was what I believed to be the best choice. It was of my thinking that it was supposed to go on the same partition and on the SSD, which is my OS drive, though with my problem, it apparently was wrong. So I tried to fix it by checking guides and following their directions, but seemed to have messed it up even more. Here is what I receive after I use the fdisk -l command: (I also added explanations for which I used each partition for) Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 48959486 125044735 38042625 5 Extended /dev/sda5 48959488 125044735 38042624 83 Linux sda1 --/ Windows Recovery sda2 --/ Windows 7 sda3/5 --/ Ubuntu root [ / ] Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1939851263 457821184 83 Linux /dev/sdb6 1939853312 1953523711 6835200 82 Linux swap / Solaris sdb3 --/ Partition for Steam games, etc. sdb5 --/ Ubuntu Home [ /home ] sdb6 --/ Ubuntu Swap Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT sdc1 --/ Generic backup I also used a Boot Script that other users suggested, so that I can give more details on my partitions and also where Grub is located... ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. Now that is weird... Why would Grub2 be installed on both my SSD and HDD? Even weirder is why is Windows on the MBR of my backup hard drive? Nothing I did should have done that... Anyway, here is the entire Output from that script... PASTEBIN So, to summarize what I need: How can I fix my setup so grub loads on startup? How can I clean my partitions to remove unnecessary grubs? What did I do wrong so that I don't do something so daft again? Thank you so much for reading, and I hope you can help me. I've been trying to have a successful setup since Friday, and I'm almost at the point that I'm really tempted to throw my computer out the window due to my frustration.

  Read the article

• Quartz compositions created in Snow Leopard (10.6) doesn't work in Leopard (10.5) despite testing in

  - by adib

  Hi I have a reasonably advanced (many patches and subpatches) quartz composition that was created in Snow Leopard but doesn't run well (many elements are not rendered) in Leopard. The composition tested OK via Quartz Composer's Test in Runtime option and works fine for both Leopard 32-bits and Leopard 64-bits (menu item "File | Test in Runtime | Leopard 32-bits". In an actual Leopard (32-bits) system, a lot of elements are not rendered in the quartz composition. Below are the log file excerpt when the composition is run in QuickTime Player under Leopard: QuickTime Player[134] *** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 335 nodes>: Patch with name "/units to pixels" is missing QuickTime Player[134] *** Message from <QCPatch = 0x06D82880 "(null)">:Cannot create node of class "/units to pixels" and identifier "(null)" QuickTime Player[134] *** Message from <QCPatch = 0x06D7C130 "(null)">:Cannot create node of class "/resize image to target" and identifier "(null)" QuickTime Player[134] *** Message from <QCPatch = 0x06D7C130 "(null)">:Cannot create connection from ["outputValue" @ "Math_1"] to ["Target_Pixels" @ "Patch_2"] The patch "units to pixels" is a system patch in Snow Leopard whereas the patch "resize image to target" is a custom virtual patch located in my home directory. It seems that we can cross out problems in which the composition is referencing a missing virtual patch. I have tested the composition under another user's account and it ran fine which shows that it already embeds the "resize image to target" virtual patch that is located in my home directory. I'm really puzzled why the composition passes the Leopard Runtime test but yet fail to run in an actual Leopard OS? Is there a post-processing step that I need to run to the composition file? Is there any way to make this patch more compatible with Leopard? Thanks in advance.

  Read the article

• LINQ Query please help C#.Net.

  - by Paul Matthews

  I'm very new to LINQ and struggling to find the answers. I have a simple SQL query. Select ID, COUNT(ID) as Selections, OptionName, SUM(Units) as Units FROM tbl_Results GROUP BY ID, OptionName. The results I got were: '1' '4' 'Approved' '40' '2' '1' 'Rejected' '19' '3' '2' 'Not Decided' '12' Due to having to encrypt all my data in the database I'm unable to do sums. Therefore I have now brought back the data and decrypt it in the application layer. Results would be: '1' 'Approved' '10' '3' 'Not Deceided' '6' '2' 'Rejected' '19' '1' 'Approved' '15' '1' 'Approved' '5' '3' 'Not Deceided' '6' '1' 'Approved' '10' using a simple class I have called back the above results, and put them in a list class. public class results { public int ID {get;set;} public string OptionName {get;set;} public int Unit {get;set;} } I almost have the LINQ query to bring back the results like the SQL query at the top var q = from r in Results group p.Unit by p.ID int g select new {ID = g.Key, Selections = g.Count(), Units = g.Sum()}; How do I ensure my LINQ query also give me the Option Name? Also if I created a class called Statistics to hold my results how would I modify the LINQ query to give me list result set? public class results { public int ID {get;set;} public int NumberOfSelections { get; set; } public string OptionName {get;set;} public int UnitTotal {get;set;} }

  Read the article

• How can you transform a set of numbers into mostly whole ones?

  - by Alice

  Small amount of background: I am working on a converter that bridges between a map maker (Tiled) that outputs in XML, and an engine (Angel2D) that inputs lua tables. Most of this is straight forward However, Tiled outputs in pixel offsets (integers of absolute values), while Angel2D inputs OpenGL units (floats of relative values); a conversion factor between these two is needed (for example, 32px = 1gu). Since OpenGL units are abstract, and the camera can zoom in or out if the objects are too small or big, the actual conversion factor isn't important; I could use a random number, and the user would merely have to zoom in or out. But it would be best if the conversion factor was selected such that most numbers outputted were small and whole (or fractions of small whole numbers), because that makes it easier to work with (and the whole point of the OpenGL units is that they are easy to work with). How would I find such a conversion factor reliably? My first attempt was to use the smallest number given; this resulted in no fractions below 1, but often lead to lots of decimal places where the factors didn't line up. Then I tried the mode of the sequence, which lead to the largest number of 1's possible, but often lead to very long floats for background images. My current approach gets the GCD of the whole sequence, which, when it works, works great, but can easily be thrown off course by a single bad apple. Note that while I could easily just pass the numbers I am given along, or pick some fixed factor, or use one of the conversions I specified above, I am looking for a method to reliably scale this list of integers to small, whole numbers or simple fractions, because this would most likely be unsurprising to the end user; this is not a one off conversion. The end users tend to use 1.0 as their "base" for manipulations (because it's simple and obvious), so it would make more sense for the sizes of entities to cluster around this.

  Read the article

• Fastest inline-assembly spinlock

  - by sigvardsen

  I'm writing a multithreaded application in c++, where performance is critical. I need to use a lot of locking while copying small structures between threads, for this I have chosen to use spinlocks. I have done some research and speed testing on this and I found that most implementations are roughly equally fast: Microsofts CRITICAL_SECTION, with SpinCount set to 1000, scores about 140 time units Implementing this algorithm with Microsofts InterlockedCompareExchange scores about 95 time units Ive also tried to use some inline assembly with __asm {} using something like this code and it scores about 70 time units, but I am not sure that a proper memory barrier has been created. Edit: The times given here are the time it takes for 2 threads to lock and unlock the spinlock 1,000,000 times. I know this isn't a lot of difference but as a spinlock is a heavily used object, one would think that programmers would have agreed on the fastest possible way to make a spinlock. Googling it leads to many different approaches however. I would think this aforementioned method would be the fastest if implemented using inline assembly and using the instruction CMPXCHG8B instead of comparing 32bit registers. Furthermore memory barriers must be taken into account, this could be done by LOCK CMPXHG8B (I think?), which guarantees "exclusive rights" to the shared memory between cores. At last [some suggests] that for busy waits should be accompanied by NOP:REP that would enable Hyper-threading processors to switch to another thread, but I am not sure whether this is true or not? From my performance-test of different spinlocks, it is seen that there is not much difference, but for purely academic purpose I would like to know which one is fastest. However as I have extremely limited experience in the assembly-language and with memory barriers, I would be happy if someone could write the assembly code for the last example I provided with LOCK CMPXCHG8B and proper memory barriers in the following template: __asm { spin_lock: ;locking code. spin_unlock: ;unlocking code. }

  Read the article

• Get settings through a button action

  - by Russ Knudsen

  I am looking for a way to access user settings (I assume, NSUserDefaults?) through a button action. Let me back up and explain. What I have right now are 2 TextFields a label and a button. The user will type in measurements in the 2 TextFields. When they hit the button the label displays the volume of the measured object in Gallons. That part of it works great. Then I wanted to give the user options to output the volume in Liters instead of gallons. I would also like to give the user options to type in the measurements in Centimeters. So I setup a 'Settings.Bundle' and configured it with 2 'Multi Value' cells (Measurement units and Volumetric Units). Each Multi Value cell has its own list of different units the user can pick from. My main issue is I don't know how to access these settings through the button action. I may be thinking of this wrong, but what I'm looking for is something like; Button Action If settings key = 0 Then do the math in Inches, Display in Gallons If settings key = 1 Then do the math in Centimeters, Display in Gallons If settings key = 2 Then do the math in Inches, Display in Liters If settings key = 3 Then do the math in Centimeters, Display in Liters Etc... Is this possible? Am I thinking of this in the wrong way? What's the best way to do this?

  Read the article

• How to draw shadows that don't suck?

  - by mystify

  A CAShapeLayer uses a CGPathRef to draw it's stuff. So I have a star path, and I want a smooth drop shadow with a radius of about 15 units. Probably there is some nice functionality in some new iPhone OS versions, but I need to do it myself for a old aged version of 3.0 (which most people still use). I tried to do some REALLY nasty stuff: I created a for-loop and sequentially created like 15 of those paths, transform-scaling them step by step to become bigger. Then assigning them to a new created CAShapeLayer and decreasing it's alpha a little bit on every iteration. Not only that this scaling is mathematically incorrect and sucks (it should happen relative to the outline!), the shadow is not rounded and looks really ugly. That's why nice soft shadows have a radius. The tips of a star shouldn't appear totally sharp after a shadow size of 15 units. They should be soft like cream. But in my ugly solution they're just as s harp as the star itself, since all I do is scale the star 15 times and decrease it's alpha 15 times. Ugly. I wonder how the big guys do it? If you had an arbitrary path, and that path must throw a shadow, how does the algorithm to do that work? Probably the path would have to be expanded like 30 times, point-by-point relative to the tangent of the outline away from the filled part, and just by 0.5 units to have a nice blending. Before I re-invent the wheel, maybe someone has a handy example or link?

  Read the article

• Cant we use a Set or collection as a return type in GAE?

  - by user273422

  In my code i have used Set<Employees> as a return type to my function addEmp(). So, i m gettin an Compilation error. The Error is: Compiling module com.employeedepartmentgae.Employeedepartmentgae Refreshing module from source Validating newly compiled units Removing units with errors [ERROR] Errors in 'file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/GreetingServiceAsync.java' [ERROR] Line 6: The import com.employeedepartmentgae.server.domainobject.Employee cannot be resolved [ERROR] Line 18: Employee cannot be resolved to a type [ERROR] Errors in 'file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/GreetingService.java' [ERROR] Line 6: The import com.employeedepartmentgae.server.domainobject.Employee cannot be resolved [ERROR] Line 20: Employee cannot be resolved to a type [ERROR] Errors in 'file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/EmployeeWidget.java' [ERROR] Line 12: The import com.employeedepartmentgae.server.domainobject.Employee cannot be resolved [ERROR] Line 75: The method addEmp(String, String, String, AsyncCallback) from the type GreetingServiceAsync refers to the missing type Employee [ERROR] Line 75: The type new AsyncCallback(){} must implement the inherited abstract method AsyncCallback.onSuccess(Set) [ERROR] Line 75: Employee cannot be resolved to a type [ERROR] Line 94: The method onSuccess(Set) of type new AsyncCallback(){} must override or implement a supertype method [ERROR] Line 94: Employee cannot be resolved to a type [ERROR] Line 96: Employee cannot be resolved to a type [ERROR] Line 96: Employee cannot be resolved to a type [ERROR] Line 98: Employee cannot be resolved to a type Removing invalidated units [WARN] Compilation unit 'file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/Employeedepartmentgae.java' is removed due to invalid reference(s): [WARN] file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/EmployeeWidget.java [WARN] Compilation unit 'file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/DepartmentWidget.java' is removed due to invalid reference(s): [WARN] file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/GreetingService.java [WARN] file:/home/wissen18/employeedepartmentgae/src/com/employeedepartmentgae/client/GreetingServiceAsync.java Computing all possible rebind results for 'com.employeedepartmentgae.client.Employeedepartmentgae' Rebinding com.employeedepartmentgae.client.Employeedepartmentgae Checking rule [ERROR] Unable to find type 'com.employeedepartmentgae.client.Employeedepartmentgae' [ERROR] Hint: Previous compiler errors may have made this type unavailable [ERROR] Hint: Check the inheritance chain from your module; it may not be inheriting a required module or a module may not be adding its source path entries properly So please help me.....

  Read the article

• Maximum length of a std::basic_string<_CharT> string

  - by themoondothshine

  Hey all, I was wondering how one can fix an upper limit for the length of a string (in C++) for a given platform. I scrutinized a lot of libraries, and most of them define it arbitrarily. The GNU C++ STL (the one with experimental C++0x features) has quite a definition: size_t npos = size_t(-1); /*!< The maximum value that can be stored in a variable of type size_t */ size_t _S_max_len = ((npos - sizeof(_Rep_base))/sizeof(_CharT) - 1) / 4; /*!< Where _CharT is a template parameter; _Rep_base is a structure which encapsulates the allocated memory */ Here's how I understand the formula: The size_t type must hold the count of units allocated to the string (where each unit is of type _CharT) Theoretically, the maximum value that a variable of type size_t can take on is the total number of units of 1 byte (ie, of type char) that may be allocated The previous value minus the overhead required to keep track of the allocated memory (_Rep_base) is therefore the maximum number of units in a string. Divide this value by sizeof(_CharT) as _CharT may require more than a byte Subtract 1 from the previous value to account for a terminating character Finally, that leave the division by 4. I have absolutely no idea why! I looked at a lot of places for an explanation, but couldn't find a satisfactory one anywhere (that's why I've been trying to make up something for it! Please correct me if I'm wrong!!).

  Read the article

• Linux boot on a raid1 software raid ?

  - by azera

  Hello I am trying to convert my single disk boot to a raid1 boot So far here is what i have: I sucessfully create the raid 1 as degraded with the new drive alone, I copied all the data on it I can mount that raid 1, see its files etc I already have a raid5 that is working on the same box (although not booting on it) I have installed grub on both drive When grub boot, it loads the kernel alright, but during the kernel boot it fails to load the "root block device" The kernel tells me : 1 - detected that root device is an md device 2 - determining root devices 3 - mounting root 4 - mounting /dev/md125 on /newroot failed: input/output error. Please enter another root device: ... At this point, if I enter /dev/sda3 (my "old" root device that isn't converted to raid yet) everything boots fine without the root. The /dev/md125 device is indeed created but it seems to be created after the error happens, as in it creates it after loading the device, when mdadm is loaded. Somehow it looks like it can't/doesn't load the raid array before it needs to mount it, and I don't know how I can solve that. My config files (taken from the system once it boots with sda3 as root device): $ cat /etc/mdadm.conf ARRAY /dev/md/md0-r5 metadata=0.90 UUID=1a118934:c831bdb3:64188b84:66721085 ARRAY /dev/md125 metadata=0.90 UUID=48ec4190:a80d4dde:64188b84:66721085 $ cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] [raid0] [raid10] md125 : active raid1 sdc3[1] 477853312 blocks [2/1] [_U] md127 : active raid5 sdd[0] sdf[3] sdb[2] sde[1] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] unused devices: <none> $ cat /boot/grub/menu.lst default 0 timeout 8 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title Gentoo Linux 2.6.31-r10 root (hd0,0) #kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/ram0 real_root=/dev/sda3 kernel /boot/kernel-genkernel-x86_64-2.6.31-gentoo-r10 root=/dev/md125 md=125,/dev/sdc3,/dev/sda3 initrd /boot/initramfs-genkernel-x86_64-2.6.31-gentoo-r10 # blkid /dev/sda1: UUID="89fee223-b845-4e0a-8a0b-e6cf695d5bcf" TYPE="ext2" /dev/sda2: UUID="a72296a8-d7d4-447f-a34b-ee920fd1a767" TYPE="swap" /dev/sda3: UUID="97eb0a6a-c385-4a9d-bf74-c0bab1fa4dc1" TYPE="ext3" /dev/sdb: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc1: UUID="d36537fd-19a0-b8a3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdd: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sde: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/md127: UUID="13a41589-4cf1-4c04-91ca-37484182c783" TYPE="ext4" /dev/sdf: UUID="1a118934-c831-bdb3-6418-8b8466721085" TYPE="linux_raid_member" /dev/sdc2: UUID="a1916397-1b48-45d7-9f98-73aa521e882f" TYPE="swap" /dev/sdc3: UUID="48ec4190-a80d-4dde-6418-8b8466721085" TYPE="linux_raid_member" /dev/md125: UUID="c947ed64-1d4d-4d1d-b4d2-24669fff916e" SEC_TYPE="ext2" TYPE="ext3" # mdadm -E mdadm: No devices to examine # fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sda1 1 5 40131 83 Linux /dev/sda2 6 1311 10490445 82 Linux swap / Solaris /dev/sda3 1312 60801 477853425 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe975e9fc Device Boot Start End Blocks Id System /dev/sdc1 1 5 40131 83 Linux /dev/sdc2 6 1311 10490445 82 Linux swap / Solaris /dev/sdc3 1312 60801 477853425 83 Linux Disk /dev/md125: 489.3 GB, 489321791488 bytes 2 heads, 4 sectors/track, 119463328 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0x00000000 Disk /dev/md125 doesn't contain a valid partition table

  Read the article

• “Disk /dev/xvda1 doesn't contain a valid partition table”

  - by Simpanoz

  Iam newbie to EC2 and Ubuntu 11 (EC2 Free tier Ubuntu). I have made following commands. sudo mkfs -t ext4 /dev/xvdf6 sudo mkdir /db sudo vim /etc/fstab /dev/xvdf6 /db ext4 noatime,noexec,nodiratime 0 0 sudo mount /dev/xvdf6 /db fdisk -l I got following output. Can some one guide me what I am doing wrong and how it can be rectified. Disk /dev/xvda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table Disk /dev/xvdf6: 6442 MB, 6442450944 bytes 255 heads, 63 sectors/track, 783 cylinders, total 12582912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvdf6 doesn't contain a valid partition table.

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• USB Wireless keyboards not registering Ctrl Alt Delete when computer boots

  - by Donovan

  I've recently installed a new PC at work. Its a Dell Optiplex 9010. I bought a USB wireless keyboard and mouse from Dell and subsequently from Logitech to use with this PC. The Dell keyboard is a model KM632 and the logitech is an mk260. Both units work properly and have decent range. The issue is when the PC boots they keyboard (neither model) will register a Ctrl+Alt+Delete to the PC. I can say for sure the keyboards are still functional as the media keys will still produce a result (notably the sleep key on the mk260). My gut reaction is I'm dealing with an issue in the PC or Windows. I'm not sure where to start though. If I unplug and reinsert the USB dongle both units will work. Also, I don't use both they keyboards at the same time I bought the Logitech fearing the Dell unit was bad. Any ideas would be appreciated.

  Read the article

• Cannot install grub to RAID1 (md0)

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

  Read the article

• Win32: IProgressDialog will not disappear until you mouse over it.

  - by Ian Boyd

  i'm using the Win32 progress dialog. The damnest thing is that when i call: progressDialog.StopProgressDialog(); it doesn't disappear. It stays on screen until the user moves her mouse over it - then it suddenly disappers. The call to StopProgressDialog returns right away (i.e. it's not a synchronous call). i can prove this by doing things after the call has returned: private void button1_Click(object sender, EventArgs e) { //Force red background to prove we've started this.BackColor = Color.Red; this.Refresh(); //Start a progress dialog IProgressDialog pd = (IProgressDialog)new ProgressDialog(); pd.StartProgressDialog(this.Handle, null, PROGDLG.Normal, IntPtr.Zero); //The long running operation System.Threading.Thread.Sleep(10000); //Stop the progress dialog pd.SetLine(1, "Stopping Progress Dialog", false, IntPtr.Zero); pd.StopProgressDialog(); pd = null; //Return form to normal color to prove we've stopped. this.BackColor = SystemColors.Control; this.Refresh(); } The form: starts gray turns red to show we've stared turns back to gray color to show we've called stop So the call to StopProgressDialog has returned, except the progress dialog is still sitting there, mocking me, showing the message: Stopping Progress Dialog Doesn't Appear for 10 seconds Additionally, the progress dialog does not appear on screen until the System.Threading.Thread.Sleep(10000); ten second sleep is over. Not limited to .NET WinForms The same code also fails in Delphi, which is also an object wrapper around Window's windows: procedure TForm1.Button1Click(Sender: TObject); var pd: IProgressDialog; begin Self.Color := clRed; Self.Repaint; pd := CoProgressDialog.Create; pd.StartProgressDialog(Self.Handle, nil, PROGDLG_NORMAL, nil); Sleep(10000); pd.SetLine(1, StringToOleStr('Stopping Progress Dialog'), False, nil); pd.StopProgressDialog; pd := nil; Self.Color := clBtnFace; Self.Repaint; end; PreserveSig An exception would be thrown if StopProgressDialog was failing. Most of the methods in IProgressDialog, when translated into C# (or into Delphi), use the compiler's automatic mechanism of converting failed COM HRESULTS into a native language exception. In other words the following two signatures will throw an exception if the COM call returned an error HRESULT (i.e. a value less than zero): //C# void StopProgressDialog(); //Delphi procedure StopProgressDialog; safecall; Whereas the following lets you see the HRESULT's and react yourself: //C# [PreserveSig] int StopProgressDialog(); //Delphi function StopProgressDialog: HRESULT; stdcall; HRESULT is a 32-bit value. If the high-bit is set (or the value is negative) it is an error. i am using the former syntax. So if StopProgressDialog is returning an error it will be automatically converted to a language exception. Note: Just for SaG i used the [PreserveSig] syntax, the returned HRESULT is zero; MsgWait? The symptom is similar to what Raymond Chen described once, which has to do with the incorrect use of PeekMessage followed by MsgWaitForMultipleObjects: "Sometimes my program gets stuck and reports one fewer record than it should. I have to jiggle the mouse to get the value to update. After a while longer, it falls two behind, then three..." But that would mean that the failure is in IProgressDialog, since it fails equally well on CLR .NET WinForms and native Win32 code.

  Read the article

• How do I mount a "DiskSecure Multiboot" partition?

  - by ????

  For a hard drive that has 4 or 5 partitions, I was able to mount one of them using Ubuntu LiveCD: sudo mount /dev/sda1 /mnt but is there a way to mount to the other partitions? (if using sudo fdisk -l, it only shows /dev/sda) GParted's snapshot is: Right now, the fdisk info is as follows: ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1aca8ea5 Device Boot Start End Blocks Id System /dev/sda1 284993226 350602558 32804666+ 7 HPFS/NTFS/exFAT and then ubuntu@ubuntu:/mnt$ sudo fdisk -l /dev/sda1 Disk /dev/sda1: 33.6 GB, 33591978496 bytes 255 heads, 63 sectors/track, 4083 cylinders, total 65609333 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2052474d This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sda1p1 ? 6579571 1924427647 958924038+ 70 DiskSecure Multi-Boot /dev/sda1p2 ? 1953251627 3771827541 909287957+ 43 Unknown /dev/sda1p3 ? 225735265 225735274 5 72 Unknown /dev/sda1p4 2642411520 2642463409 25945 0 Empty Partition table entries are not in disk order Per @lgarzo's request, parted info is: ubuntu@ubuntu:/mnt$ sudo parted /dev/sda print Model: ATA ST3320820AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 146GB 180GB 33.6GB primary ntfs boot The command sudo mount /dev/sda1p2 /mnt won't work.

  Read the article

• Component Development within SOA

  How do the concepts of component development work within SOA? Let’s first break this question down by defining what component development is. Component development is the process of implementing specific functionality in the form of small units of complied code that can be reused across multiple applications or product families. Typically, components are integrated with other components forming composite components. In general, most interaction between components is done through interfaces to promote loose coupling. The concept of loose coupling refers to the interconnections of components in a system so that their component dependences based on contracts defined by interfaces. A real life example of this can be experienced while using Legos to build a structure. If we consider each Lego block as a component, then when two more Legos are connected they form a composite component due to the fact that the structure is made up of multiple components.   It is important to note that composite components can be made from standard components and other composite components. Eventually as various components and composite components become interconnected a structure begins to form in the shape of an application or in the case of Legos in the form of Lego structure. Software components can loosely be defined as small units of related implemented functionality that can communicate with other components or may have dependencies on other components. Based on the definitions provide above, it is my personal opinion that SOA works well with the concepts of component development. The SOA architectural style focuses on creating loosely coupled services. Each service much like a component offers related functionality that can be accessed by various requesting clients.  In addition services can be derived just like components in that services can be built on other services to form composite services. In summary, the concepts of component development can work within SOA based on the example above.

  Read the article

• Failure to toubleshoot a juju charm deployment

  - by Bruno Pereira

  My environments.yaml looks like this: environments: test: type: local control-bucket: juju-a14dfae3830142d9ac23c499395c2785999 admin-secret: 6608267bbd6b447b8c90934167b2a294999 default-series: oneiric juju-origin: distro data-dir: /home/bruno/projects/juju juju bootstrap runs perfect: 2011-11-22 19:19:31,999 INFO Bootstrapping environment 'test' (type: local)... 2011-11-22 19:19:32,004 INFO Checking for required packages... 2011-11-22 19:19:33,584 INFO Starting networking... 2011-11-22 19:19:34,058 INFO Starting zookeeper... 2011-11-22 19:19:34,283 INFO Starting storage server... 2011-11-22 19:19:40,051 INFO Initializing zookeeper hierarchy 2011-11-22 19:19:40,247 INFO Starting machine agent (origin: distro)... [sudo] password for bruno: 2011-11-22 19:23:16,054 INFO Environment bootstrapped 2011-11-22 19:23:16,079 INFO 'bootstrap' command finished successfully Deploy from a known good charm is accepted (tried it with one that I am trying to create): juju deploy --repository=/home/bruno/projects/charms_repo/ local:teamspeak 2011-11-22 19:28:49,929 INFO Charm deployed as service: 'teamspeak' 2011-11-22 19:28:49,962 INFO 'deploy' command finished successfully After this I can see that juju debug-log shows activity and I can see the network indicator going on and off and activity on my hard-disk. Wait... Looking at juju status I get: services: teamspeak: charm: local:oneiric/teamspeak-1 relations: {} units: teamspeak/0: machine: 0 public-address: 192.168.122.226 relations: {} state: start_error juju debug-log does not help and I have no files under /var/log/juju or /var/lib/juju. Last juju debug-log only shows this: 2011-11-22 19:45:20,790 Machine:0: juju.agents.machine DEBUG: Units changed old:set(['wordpress/0']) new:set(['wordpress/0', 'teamspeak/0']) 2011-11-22 19:45:20,823 Machine:0: juju.agents.machine DEBUG: Starting service unit: teamspeak/0 ... 2011-11-22 19:45:21,137 Machine:0: juju.agents.machine DEBUG: Downloading charm local:oneiric/teamspeak-1 to /home/bruno/projects/juju/bruno-test/charms 2011-11-22 19:45:22,115 Machine:0: juju.agents.machine DEBUG: Starting service unit teamspeak/0 2011-11-22 19:45:22,133 Machine:0: unit.deploy INFO: Creating container teamspeak-0... 2011-11-22 19:47:04,586 Machine:0: unit.deploy INFO: Container created for teamspeak/0 2011-11-22 19:47:04,781 Machine:0: unit.deploy DEBUG: Charm extracted into container 2011-11-22 19:47:04,801 Machine:0: unit.deploy DEBUG: Starting container... 2011-11-22 19:47:07,086 Machine:0: unit.deploy INFO: Started container for teamspeak/0 2011-11-22 19:47:07,107 Machine:0: juju.agents.machine INFO: Started service unit teamspeak/0 How can I troubleshot what is happening here?

  Read the article

• 1.5 million Windows 7 phone’s sold…

  - by Boonei

  Microsoft announced that it has sold over 1.5 million windows 7 phone devices. Windows 7 is a new generation of OS. Mobile operators/users/device programmers need to adopt the same. Its not going to be a easy transition because it’s not an advanced/next version of win 6.x for mobile. We have heard that development from Microsoft side for Win 6.x devices will not continue after sometime. Don’t know how long will get the support! Everything in it s quite new, like OS, User interface, XBox sync, and also requires mobile phone companies to run the OS on high end chips, meaning atleast 1GHz. So the user segment occupied by phones like HTC Wild Fire are not the ones targeted.   Hey ! There an is a catch with this magic number 1.5 million…. It depicts only the number of units sold to mobile operators and retailers. It’s not the number of actual units held in consumers hands and activated. The number could improve significantly in 2011 where Sprint and Verizon join the party in United States. Atleast dozen phone models are in line up now in the rest of the world running Win 7 OS. One good things that customers can rejoice is that Microsoft will direly push software updates to all its consumers. Operator will not interfere. We can expect strong sales going forward with just this important point where Google’s Android lacks the same. [Img Credit: Microsoft] This article titled,1.5 million Windows 7 phone’s sold…, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Other games that employ mechanics like the game "Diplomacy"

  - by Kevin Peno

  I'm doing a little bit of research and I'm hoping you can help me track down any games, other than Diplomacy (online version here), that employ all or some of the mechanics in Diplomacy (rules, short form). Examples I'm looking for: Simultaneous orders given prior to execution of orders In Diplomacy, players "write down" their moves and execute them "at the same time" Support, in terms of supporting an attacker or defender "take" a territory. In Diplomacy, no one unit is stronger than another you need to combine the strength of multiple units to attack other territories. Rules for how move conflicts are resolved Example, 2 units move into a space, but only one is allowed, what happens. I may add to this list later, but these are the primary things I'm looking for. If you need clarification on anything just let me know. Note: I tried asking this on GamingSE, but it was shot down. So, I am unsure where else I could post this. Since I am researching this for game development purposes, I assume this post is on topic. Please let me know if this is not the case. Please also feel free to re-categorize this. Thanks!

  Read the article

• TypeError: Cannot call method 'hasOwnProperty' of null, while creating a QMLscene window

  - by tomoqv

  I am trying to make a simple Ubuntu Touch web application with Qt Creator. I have set up a new project according to the tutorial and committed the files to Bazaar. I have set a url instead of the default index.htm in the qml file of the project. Using build-run loads a QML Scene window with the desired webpage, but Qt Creator yields the following output: Starting /usr/lib/i386-linux-gnu/qt5/bin/qmlscene -I /home/tomas/ubuntu-sdk/SL-planner -I /usr/bin -I /usr/lib/i386-linux-gnu/qt5/qml /home/tomas/ubuntu-sdk/SL-planner/SL-planner.qml unity::action::ActionManager::ActionManager(QObject*): Could not determine application identifier. HUD will not work properly. Provide your application identifier in $APP_ID environment variable. file:///usr/lib/i386-linux-gnu/qt5/qml/Ubuntu/Components/MainView.qml:257: TypeError: Cannot call method 'hasOwnProperty' of null My SL-planner.qml looks like this: import QtQuick 2.0 import Ubuntu.Components 0.1 import QtWebKit 3.0 /*! \brief MainView with a Flickable WebView. */ MainView { // objectName for functional testing purposes (autopilot-qt5) objectName: "mainView" // Note! applicationName needs to match the "name" field of the click manifest applicationName: "com.ubuntu.developer.tomoqv.SL-planner" /* This property enables the application to change orientation when the device is rotated. The default is false. */ automaticOrientation: true width: units.gu(100) height: units.gu(75) Flickable { id: webViewFlickable anchors.fill: parent WebView { id: webView anchors.fill: parent url: "http://mobil.sl.se" } } } What am I missing?

  Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >