Search Results

Search found 17233 results on 690 pages for 'download speed'.

Page 66/690 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

  • DNS Resolver Speed Techniques

    - by Rob Olmos
    I recently received a reply to my concerns about some DNS servers being slower than others despite all servers being anycast: In practice, most resolvers won't be impacted by the slower paths to some of the name servers in the set. Most resolvers employ various techniques to provide fast lookups, such as preferring name servers that were previously seen to be faster, sending simultaneous queries to multiple name servers, or pre-fetching queries before the TTL has expired. I was not aware that resolvers used these techniques and I was unsuccessful at searching for more info about this. Are there any names for these techniques? Which resolvers employ which of these techniques?

    Read the article

  • Server not responding to SSH and HTTP but ping works

    - by yes123
    Hello guys, I requested an hard reboot because none of ssh and http worked. Ping worked normally. Which logs should i check to understand what was the problem? Thanks! (debian 6 on lamp) Edit: my memory and swap: Mem: 4040068k total, 1114920k used, 2925148k free, 109212k buffers Swap: 1051384k total, 0k used, 1051384k free, 283820k cached 4 GB ram (and more than 1TB of HDD) The cause is from 2 days ago: look how the usage of swap goes +60% in less than 10hours My control panel reports this as top 5 memory usage process: If every apache2 process is 190MB large that sux because IF i do TOP i have 262 sleeping process most of them are apache2! My apache mpm_prefork settings are: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 ServerLimit 1500 MaxClients 1500 MaxRequestsPerChild 2000 </IfModule> KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4

    Read the article

  • Reducing Loading of Advertisers Scripts

    - by HollerTrain
    I have a website (http://dev2.liquor.com) that loads very quickly when I remove the advertisers and tracking scripts our partners give us. Of course we need to reduce page load time from 6 seconds to 1 second, and I see that it is 100% all of our external js files for partner tracking, ads, etc. I have been banging my head against the wall trying to find alternate ways to load/compress/serve the multidue of js the user needs to download. I can easily compress/minify mine, but someone else's that is not on our server is becoming hard to do so. The best I can do is get a C on YSlow, and each suggestion they give me pertains to my stupid tracking js scripts! Any help would be greatly appreciated.

    Read the article

  • Download or view a servers wins database

    - by Segfault
    I am trying to troubleshoot a WINS browsing problem in a Server 2008 AD Forest. I am in one domain and the problem is with a sibling domain. What command can i use to dump or view the WINS database on a particular AD server by name, in a different domain than me? I thought one of the subcommands of net would have an option for this, but I can't find it. I also tried browstat.exe getblist but it gives me an error message "The list of servers for this workgroup is not currently available". I am not a domain admin and don't have any rights to the either domain other than a normal user. Anyone know how this can be done?

    Read the article

  • 2010 MBP HD speed sanity check?

    - by hvgotcodes
    I have a 2010 MBP with the 7200 rpm hard drive. I was copying a 2.1GB file, and noticed read/write speeds of around 20MB/s. Is that reasonable? Seems slow to me.... What is the proper way to benchmark a HD on OS X? Googling I see xbench, but that hasn't been updated in years. I also see some guides for using the command line. The goal would be to benchmark my drive and then compare the results to some official scores that the drive should be getting.

    Read the article

  • BitTorrent Myth

    - by Moon .
    In BitTorent Statistics there is a field "Total Ratio" that is the ratio between total downloads and uploads. i have heard that this ratio affects BitTorrent'ss performance. If the ratio is better then BitTorrent Network provides you services on priority. And If the ratio is down (less uploads) then the BitTorrent provides you services on average or below average priorities. Is there something like that.....

    Read the article

  • how to correctly download tomcat 6 on centos 5.5

    - by user582862
    hi guys, i am a big confused about how to install tomcat 6 on centos 5.5 final. this is what i am trying to do: # cd /etc/yum.repos.d/ # wget http://jpackage.org/jpackage50.repo # yum install tomcat6 tomcat6-webapps tomcat6-admin-webapps but when i type the widget command, this is what i get: Resolving www.jpackage.org... failed: Temporary failure in name resolution. wget: unable to resolve host address `www.jpackage.org' could anyone kindly show me the right way please. really in trouble at the moment with this. thanks in advance.

    Read the article

  • Ubuntu 9.10 Dowload Speed Very Slow

    - by Don
    I'm running Ubuntu 9.10 desktop and I'm new to the Linux world, so bear with me. I'm on a corporate network of 3 T1s shared across 50-60 users. I typically get about 300 KB/sec for downloads, but for whatever reason, the Linux box will start out in that range, then drop to less than 1KB/Sec sometimes. Doesn't seen to matter where I'm downloading from. Right now I'm trying to get Eclipse for PHP and it's running at 3-6KB/sec. Getting the updates for the system will also drop to very slow rates. Our IT person has set up the machine to get the same 10.0.0.x address when it starts, and moved this IP to bypass our Proxy/Firewall going out, so that shouldn't be the issue. Can anyone recommend something I can try to better diagnose the problem. Again, I'm new to the Linux world and the hardware/OS setup side in general (coming form more of a coding background). Thanks for any advice.

    Read the article

  • partially downloaded a torrent file and renamed it

    - by user2613789
    I have partially downloaded a torrent file in ubuntu and unfortunately i renamed it. and after some time i resumed the remaining torrent file.but the torrent then got downloaded with its default name and i lost the complete file information into two different files... please help me out...is there any way that i can produce the whole information into one file...i can't open either file that means both file got corrupted or so...the file is in mp4 format...please help me

    Read the article

  • OS X software updates download but don't install

    - by ridogi
    I've got three 10.6 computers that won't install OS X updates. Checking for new software will show about a dozen updates (Security updates, Safari, iPhoto, printers, etc) and if choose install it downloads them. After downloading and then clicking restart the computer sits at the purplish sky desktop with no progress bar, and then after about 3 minutes it goes back to the login window (without ever installing or restarting). If I then select check for updates the same updates will all be presented and I can repeat the process. Manually downloading and installing an update such as 10.6.8 combo updater works as it should, and then check for updates no longer presents that particular update as an option. This seems to be the result of some setting or 3rd party application as I've got 3 out 7 computers experiencing this exact same problem. What could cause this and how can I fix it?

    Read the article

  • Hard drive write speed - finding a lighter antivirus?

    - by Shingetsu
    I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

    Read the article

  • Redirect traffic to local address so iOS speedtest app measures LAN speed

    - by ivan_sig
    I have mounted a Speedtest Mini server on a local LAMP, so I can test my LAN speeds effortlessly just by opening the URL with a Flash enabled web browser, the thing is, I want my iOS and Android devices to test with the LAN server too, not with the WAN, as I'm trying to measure LAN-Only performance. Is there a way so I can redirect the traffic intended to an specific external IP (The one of the real server) to my local server?. I know the servers IP as a short Wireshark analysis gave me the data, but still searching for a way to make that redirect. I have Jailbreak and root on my devices, so playing with system files is not a problem. I've tried mounting a proxy and making redirects by the hosts file and domain names, but it looks like Ookla's app relies on IP address only.

    Read the article

  • RAID setup for maximizing data retention and read speed

    - by cat pants
    My goals are simple: maximize data retention safety, and maximize read speeds. My first instinct is to do a a three drive software RAID 1. I have only used fakeraid RAID 1 in the past and it was terrible (would have led to data loss actually if it weren't for backups) Would you say software raid 1 or a cheap actual hardware raid card? OS will be linux. Could I start with a two drive raid 1 and add a third drive on the fly? Can I hot swap? Can I pull one of the drives and throw it into a new machine and be able to read all the data? I do not want a situation where I have a raid card fail and have to try and find the same chipset in order to read my data (which i am assuming can happen) Please clarify any points on which it sounds like I have no idea what I am talking about, as I am admittedly inexperienced here. (My hardest lesson was fakeraid lol) Thanks!

    Read the article

  • Can my PC run Need for Speed Shift

    - by John
    Here are my PC's specs: Operating System MS Windows 7 32-bit CPU Intel Mobile Core 2 Duo T8100 @ 2.10GHz Penryn 45nm Technology RAM 3.0GB Dual-Channel DDR2 @ 332MHz 5-5-5-15 Motherboard Sony Corporation VAIO (N/A) Graphics Nvidia Defaul @ 1280x800 256MB GeForce 8400M GT (Sony) Hard Drives 250GB Hitachi Hitachi HTS542525K9SA00 ATA Device (IDE) Optical Drives Optiarc DVD RW AD-7560A ATA Device Audio High Definition Audio Device

    Read the article

  • Up-to-date Comparison of High-Speed USB Flash Drives

    - by Zoredache
    I am looking for comparison of the performance of USB flash drives. I have found several older comparisons, but I am trying to find a more up-to-date comparisons that apply to the larger storage sizes (32-128GB). I can try looking up the specs of various drives, but vendors have been known to exaggerate, or use numbers that are on accurate in tests that do not reflect actual usage. I was hoping to find 3rd party site which had perform testing.

    Read the article

  • screen scraper templates for various websites

    - by intuited
    I'm looking specifically for a convenient way to locally archive posts from this and other similar sites. I'd like to separate the question itself from the answers, or maybe crop the question and store it, keeping the page title. Obviously I don't need to store the menu or the various other site interface chrome. The best way to do this would seem to be to associate an XSLT template with a match on the URL and use that template to pull the various relevant informations and format them. My two-part question: Is there a tool specifically built for this task? I.E. something that takes a URL and checks it against a map of path-matching expressions to templates, and outputs the result of applying the template to that resource? xmlto seems to be most of the way there, and could probably just be called from a script that does the pattern-matching, but something already integrated would be more convenient. Is such a URL_pattern-to-XSLT_template map publicly available somewhere? Question 2.5: Is it legal to do this with sites like this one that have public licenses on their content?

    Read the article

  • Fresh install of nginx causes browser to download index.html instead of opening it

    - by 010110110101
    When I view this in Chrome, http://localhost:90 the file is downloaded instead of displayed in Chrome. This question has been asked a lot of times on SO, but about index.php files. My problem is a plain jane HTML file, not a PHP file. That hasn't been asked yet. I was hoping the solution would be similar, but I haven't been able to figure it out. Here's my example.com.conf: server { server_name localhost; listen 90; root /var/www/example.com/html index index.html location / { try_file $uri $uri/ =404; } } My index.html file contains only two words, no markup Hello World I think it's the mime.types. The mime.types file has the entry for html in it. This is a fresh nginx install. nginx -t reports "test is successful"

    Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >