Search Results

Search found 5122 results on 205 pages for 'max shawabkeh'.

Page 66/205 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

  • runtime error (SIGSEGV)

    - by vamsi2018
    hi, i would be happy to know why i got this error for the problem http://www.codechef.com/problems/AXR1P2 in codechef.com and my code is... include include int main() { int *num=0,n=0,i=0,max=0;char *s=""; int sum[9]={1,5,14,20,25,31,32,38,39},dsum[9]={1,7,8,14,19,25,26,32,33},unitdig=0; do { gets(s); *(num+i)=(int)atoi(s); i++; }while(s!='#'); max=i; for(i=0;i10) unitdig=33(n/10-1)+39+dsum[(n%10)-1]; else unitdig=sum[(n%10)-1]; printf("%d\n",unitdig%10); } getchar(); return 0;}

    Read the article

  • Something is wrong with this C code to reverse string, but I dont know what ? please help

    - by Harbhag
    Hi all, I am beginnner to programming. I wrote this little program to reverse a string. But if I try to reverse a string which is less than 5 characters long then it gives wrong output. I cant seem to find whats wrong. #include<stdio.h> #include<string.h> int main() { char test[50]; char rtest[50]; int i, j=0; printf("Enter string : "); scanf("%s", test); int max = strlen(test) - 1; for ( i = max; i>=0; i--) { rtest[j] = test[i]; j++; } printf("Reversal is : %s\n", rtest); return 0; }

    Read the article

  • Big O complexity of simple for not always linear?

    - by i30817
    I'm sure most of you know that a nested loop has O(n^2) complexity if the function input size is n for(int i = 0; i < n; i++){ for(int j = 0; j < n; j++){ ... } } I think that this is similar, by a analogous argument, but i'm not sure can anyone confirm? for(int i = 0, max = n*n; i < max; i++{ ... } If so i guess that there is some kinds of code whose big O mapping is not immediately obvious besides recursion and subroutines.

    Read the article

  • What is better, a STL list or a STL Map for 20 entries, considering order of insertion is as importa

    - by Abhijeet
    I have the following scenario.The implementation is required for a real time application. 1)I need to store at max 20 entries in a container(STL Map, STL List etc). 2)If a new entry comes and 20 entries are already present i have to overwrite the oldest entry with the new entry. Considering point 2, i feel if the container is full (Max 20 entries) 'list' is the best bet as i can always remove the first entry in the list and add the new one at last (push_back). However, search won't be as efficient. For only 20 entries, does it really make a big difference in terms of searching efficiency if i use a list in place of a map? Also considering the cost of insertion in map i feel i should go for a list? Could you please tell what is a better bet for me ?

    Read the article

  • Concurrent Generation of Sequential Keys

    - by GenTiradentes
    I'm working on a project which generates a very large number of sequential text strings, in a very tight loop. My application makes heavy use of SIMD instruction set extensions like SSE and MMX, in other parts of the program, but the key generator is plain C++. The way my key generator works is I have a keyGenerator class, which holds a single char array that stores the current key. To get the next key, there is a function called "incrementKey," which treats the string as a number, adding one to the string, carrying where necessary. Now, the problem is, the keygen is somewhat of a bottleneck. It's fast, but it would be nice if it were faster. One of the biggest problems is that when I'm generating a set of sequential keys to be processed using my SSE2 code, I have to have the entire set stored in an array, which means I have to sequentially generate and copy 12 strings into an array, one by one, like so: char* keys[12]; for(int i = 0; i < 12; i++) { keys[i] = new char[16]; strcmp(keys[i], keygen++); } So how would you efficiently generate these plaintext strings in order? I need some ideas to help move this along. Concurrency would be nice; as my code is right now, each successive key depends on the previous one, which means that the processor can't start work on the next key until the current one has been completely generated. Here is the code relevant to the key generator: KeyGenerator.h class keyGenerator { public: keyGenerator(unsigned long long location, characterSet* charset) : location(location), charset(charset) { for(int i = 0; i < 16; i++) key[i] = 0; charsetStr = charset->getCharsetStr(); integerToKey(); } ~keyGenerator() { } inline void incrementKey() { register size_t keyLength = strlen(key); for(register char* place = key; place; place++) { if(*place == charset->maxChar) { // Overflow, reset char at place *place = charset->minChar; if(!*(place+1)) { // Carry, no space, insert char *(place+1) = charset->minChar; ++keyLength; break; } else { continue; } } else { // Space available, increment char at place if(*place == charset->charSecEnd[0]) *place = charset->charSecBegin[0]; else if(*place == charset->charSecEnd[1]) *place = charset->charSecBegin[1]; (*place)++; break; } } } inline char* operator++() // Pre-increment { incrementKey(); return key; } inline char* operator++(int) // Post-increment { memcpy(postIncrementRetval, key, 16); incrementKey(); return postIncrementRetval; } void integerToKey() { register unsigned long long num = location; if(!num) { key[0] = charsetStr[0]; } else { num++; while(num) { num--; unsigned int remainder = num % charset->length; num /= charset->length; key[strlen(key)] = charsetStr[remainder]; } } } inline unsigned long long keyToInteger() { // TODO return 0; } inline char* getKey() { return key; } private: unsigned long long location; characterSet* charset; std::string charsetStr; char key[16]; // We need a place to store the key for the post increment operation. char postIncrementRetval[16]; }; CharacterSet.h struct characterSet { characterSet() { } characterSet(unsigned int len, int min, int max, int charsec0, int charsec1, int charsec2, int charsec3) { init(length, min, max, charsec0, charsec1, charsec2, charsec3); } void init(unsigned int len, int min, int max, int charsec0, int charsec1, int charsec2, int charsec3) { length = len; minChar = min; maxChar = max; charSecEnd[0] = charsec0; charSecBegin[0] = charsec1; charSecEnd[1] = charsec2; charSecBegin[1] = charsec3; } std::string getCharsetStr() { std::string retval; for(int chr = minChar; chr != maxChar; chr++) { for(int i = 0; i < 2; i++) if(chr == charSecEnd[i]) chr = charSecBegin[i]; retval += chr; } return retval; } int minChar, maxChar; // charSec = character set section int charSecEnd[2], charSecBegin[2]; unsigned int length; };

    Read the article

  • iphone app crashing when url connection connection timed out is coming

    - by satyam
    I'm creating iphone app. In that, when the app starts, it connects to server and downloads few images and then proceeds with app. When app is downloading, it will show the initial splash screen. as long as my server is able to ping my iphone, its working well. but the trouble starts when my server is taking much time to respond for the NSURL request. The app is crashing with following error: Mon May 14 13:56:34 unknown Springboard[24] <Warning>: com.xxxx.xxx failed to launch in time I understood that when such issues happen with application, iphone crashes the appliation. I would like to know how much max time iphone allows app to respond to such instances. Is there any max value for that?

    Read the article

  • Error using `loess.smooth` but not `loess` or `lowess`

    - by Sandy
    I need to smooth some simulated data, but occasionally run into problems when the simulated ordinates to be smoothed are mostly the same value. Here is a small reproducible example of the simplest case. > x <- 0:50 > y <- rep(0,51) > loess.smooth(x,y) Error in simpleLoess(y, x, w, span, degree, FALSE, FALSE, normalize = FALSE, : NA/NaN/Inf in foreign function call (arg 1) loess(y~x), lowess(x,y), and their analogue in MATLAB produce the expected results without error on this example. I am using loess.smooth here because I need the estimates evaluated at a set number of points. According to the documentation, I believe loess.smooth and loess are using the same estimation functions, but the former is an "auxiliary function" to handle the evaluation points. The error seems to come from a C function: > traceback() 3: .C(R_loess_raw, as.double(pseudovalues), as.double(x), as.double(weights), as.double(weights), as.integer(D), as.integer(N), as.double(span), as.integer(degree), as.integer(nonparametric), as.integer(order.drop.sqr), as.integer(sum.drop.sqr), as.double(span * cell), as.character(surf.stat), temp = double(N), parameter = integer(7), a = integer(max.kd), xi = double(max.kd), vert = double(2 * D), vval = double((D + 1) * max.kd), diagonal = double(N), trL = double(1), delta1 = double(1), delta2 = double(1), as.integer(0L)) 2: simpleLoess(y, x, w, span, degree, FALSE, FALSE, normalize = FALSE, "none", "interpolate", control$cell, iterations, control$trace.hat) 1: loess.smooth(x, y) loess also calls simpleLoess, but with what appears to be different arguments. Of course, if you vary enough of the y values to be nonzero, loess.smooth runs without error, but I need the program to run in even the most extreme case. Hopefully, someone can help me with one and/or all of the following: Understand why only loess.smooth, and not the other functions, produces this error and find a solution for this problem. Find a work-around using loess but still evaluating the estimate at a specified number of points that can differ from the vector x. For example, I might want to use only x <- seq(0,50,10) in the smoothing, but evaluate the estimate at x <- 0:50. As far as I know, using predict with a new data frame will not properly handle this situation, but please let me know if I am missing something there. Handle the error in a way that doesn't stop the program from moving onto the next simulated data set. Thanks in advance for any help on this problem.

    Read the article

  • Fluent-NHibernate - Component property attributes ignored by Convention

    - by BobTodd
    I have a component with a number of properties that have various attributes Normally when these attributes are added to a plain old domain object they are picked up by my custom AttributeConventions. For the Component properties they are not. Is there some extra wiring needed for these? e.g. public class Component { [Length(Max=50)] public virtual string Name {get; set;} } public class MyClass { public virtual Component Component {get; set;} [Length(Max=50)] public virtual string Color {get; set;} } I get a table MyClass with columns Color & ComponentName Color is an nvarchar(50) whilst ComponentName is an nvarchar(255) (the default)

    Read the article

  • How can I call a module in a Perl one-liner?

    - by Zaid
    Say I have a data file that I want to process; I want to take the maximum value of each of the column and append it to the end of each line. INPUT: T1 T2 T3 35.82 34.67 31.68 32.20 34.52 33.59 37.41 38.64 37.56 OUTPUT: T1 T2 T3 35.82 34.67 31.68 35.82 32.20 34.52 33.59 34.52 37.41 38.64 37.56 38.64 I'm trying to implement this as a one-liner. So far, this is what I've come up with, although it complains that &main::max is undefined: perl -MList::Util -ani.bak -e "print qq(@F).q( ).max(@F).qq(\n)" file1.txt It seems that I haven't loaded the List::Util module. What's wrong? And is the header column an issue? perlrun doesn't have a decent example on how to do this (actually it does now, my documentation was a little out-of-date).

    Read the article

  • Scheme sorting a list

    - by John
    Okay so I am trying to take in a list and sort it from greatest to smallest. Example: > (maxheap (list 5 6 2 1 18 7)) ;output: > (18 7 6 5 2 1) So here's what I got so far: (define (mkmaxheap heaplist) (let ((max (mymax(heaplist)))) ;mymax is a func that returns max number, it works (let (( head (car heaplist)) (tail (cdr heaplist))) (if (null? tail) newlist)))) Thats all I could get to compile, all the other code I wrote failed. Any help on solving this would be much appreciated.

    Read the article

  • Rename image file on upload php

    - by blasteralfred
    Hi, I have a form which uploads and re sizes image. The html file file submits data to a php file. The script is as follows; Index.html <form action="resizer.php" method="post" enctype="multipart/form-data"> Image: <input type="file" name="file" /> <input type="submit" name="submit" value="upload" /> </form> Resizer.php <?php require_once('imageresizer.class.php'); $imagename = "myimagename"; //Path To Upload Directory $dirpath = "uploaded/"; //MAX WIDTH AND HEIGHT OF IMAGE $max_height = 100; $max_width = 100; //Create Image Control Object - Parameters(file name, file tmp name, file type, directory path) $resizer = new ImageResizer($_FILES['file']['name'],$_FILES['file']['tmp_name'],$dirpath); //RESIZE IMAGE - Parameteres(max height, max width) $resizer->resizeImage($max_height,$max_width); //Display Image $resizer->showResizedImage(); ?> imageresizer.class.php <?php class ImageResizer{ public $file_name; public $tmp_name; public $dir_path; //Set variables public function __construct($file_name,$tmp_name,$dir_path){ $this->file_name = $file_name; $this->tmp_name = $tmp_name; $this->dir_path = $dir_path; $this->getImageInfo(); $this->moveImage(); } //Move the uploaded image to the new directory and rename public function moveImage(){ if(!is_dir($this->dir_path)){ mkdir($this->dir_path,0777,true); } if(move_uploaded_file($this->tmp_name,$this->dir_path.'_'.$this->file_name)){ $this->setFileName($this->dir_path.'_'.$this->file_name); } } //Define the new filename public function setFileName($file_name){ $this->file_name = $file_name; return $this->file_name; } //Resize the image function with new max height and width public function resizeImage($max_height,$max_width){ $this->max_height = $max_height; $this->max_width = $max_width; if($this->height > $this->width){ $ratio = $this->height / $this->max_height; $new_height = $this->max_height; $new_width = ($this->width / $ratio); } elseif($this->height < $this->width){ $ratio = ($this->width / $this->max_width); $new_width = $this->max_width; $new_height = ($this->height / $ratio); } else{ $new_width = $this->max_width; $new_height = $this->max_height; } $thumb = imagecreatetruecolor($new_width, $new_height); switch($this->file_type){ case 1: $image = imagecreatefromgif($this->file_name); break; case 2: $image = imagecreatefromjpeg($this->file_name); break; case 3: $image = imagecreatefrompng($this->file_name); break; case 4: $image = imagecreatefromwbmp($this->file_name); } imagecopyresampled($thumb, $image, 0, 0, 0, 0, $new_width, $new_height, $this->width, $this->height); switch($this->file_type){ case 1: imagegif($thumb,$this->file_name); break; case 2: imagejpeg($thumb,$this->file_name,100); break; case 3: imagepng($thumb,$this->file_name,0); break; case 4: imagewbmp($thumb,$this->file_name); } imagedestroy($image); imagedestroy($thumb); } public function getImageInfo(){ list($width, $height, $type) = getimagesize($this->tmp_name); $this->width = $width; $this->height = $height; $this->file_type = $type; } public function showResizedImage(){ echo "<img src='".$this->file_name." />"; } public function onSuccess(){ header("location: index.php"); } } ?> Everything is working well. The image will be uploaded in it's original filename and extension with a "_" prefix. But i want to rename the image to "myimagename" on upload, which is a variable in "Resizer.php". How can i make this possible?? Thanks in advance :) blasteralfred

    Read the article

  • Update Rule in Temporal difference

    - by Betamoo
    The update rule TD(0) Q-Learning: Q(t-1) = (1-alpha) * Q(t-1) + (alpha) * (Reward(t-1) + gamma* Max( Q(t) ) ) Then take either the current best action (to optimize) or a random action (to explorer) Where MaxNextQ is the maximum Q that can be got in the next state... But in TD(1) I think update rule will be: Q(t-2) = (1-alpha) * Q(t-2) + (alpha) * (Reward(t-2) + gamma * Reward(t-1) + gamma * gamma * Max( Q(t) ) ) My question: The term gamma * Reward(t-1) means that I will always take my best action at t-1 .. which I think will prevent exploring.. Can someone give me a hint? Thanks

    Read the article

  • Generating a error code per property in Hibernate validator

    - by Mike Q
    Hi all, I am looking at using hibernate validator for a requirement of mine. I want to validate a bean where properties may have multiple validation checks. e.g. class MyValidationBean { @NotNull @Length( min = 5, max = 10 ) private String myProperty; } But if this property fails validation I want a specific error code to be associated with the ConstraintViolation, regardless of whether it failed because of @Required or @Length, although I would like to preserve the error message. class MyValidationBean { @NotNull @Length( min = 5, max = 10 ) @ErrorCode( "1234" ) private String myProperty; } Something like the above would be good but it doesn't have to be structured exactly like that. I can't see a way to do this with hibernate validator. Is it possible? Thanks.

    Read the article

  • image processing toolbox in matlab

    - by yasuhiro89
    I've got a specific question and a related more general one... Why does imextendedmax() not give for example 9 in A(3,3) as a max? Generally... what is the best way for finding multiple maxes/peaks? The nice thing about imextended max is it allows a threshold where presumably everything under that threshold is not counted whereas imregionalmax and findpeaks are more general, less effective. A=round(rand(5)*10) A = 1 5 4 8 3 5 1 8 8 3 9 3 9 1 2 9 7 3 5 9 6 3 5 6 8 B=imextendedmax(A,8) B = 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

    Read the article

  • how to target css to iPad but exclude Safari 4 desktop using a media query?

    - by miriam835work
    I am trying to use a media rule to target css to iPad only. I want to exclude iPhone/iPod and desktop browsers. I would like to to also exclude other mobile devices if possible. I have used <style type="text/css" media="only screen and (min-device-width: 768px) and (max-device-width: 1024px)"> but just found out that desktop Safari 4 reads it. I have tried variations with "481px" instead of "768px" and another that adds an orientation to that: <style type="text/css" media="only screen and (min-device-width: 481px) and (max-device-width: 1024px) and (orientation:portrait)"> but not luck. (Later we will be sniffing user-agent strings for iPad, but for now that solution won't work.) Thanks!

    Read the article

  • How to diagnose failing 6Gbps SATA connection?

    - by whitequark
    I have a Samsung RC530 notebook and OCZ Vertex-3 6Gbps SATA SSD working in AHCI mode. # dmesg | grep DMI SAMSUNG ELECTRONICS CO., LTD. RC530/RC730/RC530/RC730, BIOS 03WD.M008.20110927.PSA 09/27/2011 # lspci -nn 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) # sdparm -a /dev/sda /dev/sda: ATA OCZ-VERTEX3 2.15 At the boot, the following messages are present in dmesg (I am running Debian wheezy @ Linux 3.2.8): # dmesg | grep -iE '(ata|ahci)' [ 5.179783] ahci 0000:00:1f.2: version 3.0 [ 5.179802] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.179864] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 5.195424] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode [ 5.195429] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.195436] ahci 0000:00:1f.2: setting latency timer to 64 [ 5.204035] scsi0 : ahci [ 5.204301] scsi1 : ahci [ 5.204447] scsi2 : ahci [ 5.204592] scsi3 : ahci [ 5.204682] scsi4 : ahci [ 5.204799] scsi5 : ahci [ 5.204917] ata1: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06100 irq 42 [ 5.204920] ata2: DUMMY [ 5.204923] ata3: SATA max UDMA/133 abar m2048@0xf7c06000 port 0xf7c06200 irq 42 [ 5.204924] ata4: DUMMY [ 5.204926] ata5: DUMMY [ 5.204927] ata6: DUMMY [ 5.523039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.525911] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100 [ 5.531006] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.533703] ata3.00: configured for UDMA/100 [ 5.542790] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133 [ 5.542800] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.552751] ata1.00: configured for UDMA/133 [ 5.553050] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5 [ 5.559621] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC00 PQ: 0 ANSI: 5 [ 5.564059] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 5.564127] sd 0:0:0:0: [sda] Write Protect is off [ 5.564131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.564158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.564582] sda: sda1 [ 5.564810] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.572006] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.572010] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.572189] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 6.717181] ata1.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen [ 6.717238] ata1.00: irq_stat 0x08000000, interface fatal error [ 6.717291] ata1: SError: { UnrecovData HostInt 10B8B BadCRC } [ 6.717342] ata1.00: failed command: READ FPDMA QUEUED [ 6.717395] ata1.00: cmd 60/50:00:20:39:58/00:00:00:00:00/40 tag 0 ncq 40960 in [ 6.717396] res 40/00:00:20:39:58/00:00:00:00:00/40 Emask 0x50 (ATA bus error) [ 6.717503] ata1.00: status: { DRDY } [ 6.717553] ata1: hard resetting link [ 7.033417] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.055234] ata1.00: configured for UDMA/133 [ 7.055262] ata1: EH complete [ 7.147280] ata1.00: exception Emask 0x10 SAct 0xf8 SErr 0x280100 action 0x6 frozen [ 7.147340] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.147393] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.147460] ata1.00: failed command: READ FPDMA QUEUED [ 7.147529] ata1.00: cmd 60/08:18:88:17:41/00:00:02:00:00/40 tag 3 ncq 4096 in [ 7.147531] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147691] ata1.00: status: { DRDY } [ 7.147754] ata1.00: failed command: READ FPDMA QUEUED [ 7.147821] ata1.00: cmd 60/00:20:f8:42:4c/01:00:02:00:00/40 tag 4 ncq 131072 in [ 7.147822] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.147977] ata1.00: status: { DRDY } [ 7.148036] ata1.00: failed command: READ FPDMA QUEUED [ 7.148100] ata1.00: cmd 60/50:28:f8:43:4c/00:00:02:00:00/40 tag 5 ncq 40960 in [ 7.148101] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148255] ata1.00: status: { DRDY } [ 7.148315] ata1.00: failed command: READ FPDMA QUEUED [ 7.148379] ata1.00: cmd 60/00:30:50:98:64/01:00:02:00:00/40 tag 6 ncq 131072 in [ 7.148380] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148534] ata1.00: status: { DRDY } [ 7.148593] ata1.00: failed command: READ FPDMA QUEUED [ 7.148657] ata1.00: cmd 60/00:38:50:99:64/01:00:02:00:00/40 tag 7 ncq 131072 in [ 7.148658] res 40/00:38:50:99:64/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.148813] ata1.00: status: { DRDY } [ 7.148875] ata1: hard resetting link [ 7.464842] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.486794] ata1.00: configured for UDMA/133 [ 7.486822] ata1: EH complete [ 7.546395] ata1.00: exception Emask 0x10 SAct 0x2f SErr 0x280100 action 0x6 frozen [ 7.546470] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.546531] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.546588] ata1.00: failed command: READ FPDMA QUEUED [ 7.546648] ata1.00: cmd 60/00:00:e0:4b:61/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.546649] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.546794] ata1.00: status: { DRDY } [ 7.546847] ata1.00: failed command: READ FPDMA QUEUED [ 7.546906] ata1.00: cmd 60/00:08:90:2f:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.546907] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547053] ata1.00: status: { DRDY } [ 7.547106] ata1.00: failed command: READ FPDMA QUEUED [ 7.547165] ata1.00: cmd 60/00:10:90:30:48/01:00:02:00:00/40 tag 2 ncq 131072 in [ 7.547166] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547310] ata1.00: status: { DRDY } [ 7.547363] ata1.00: failed command: READ FPDMA QUEUED [ 7.547422] ata1.00: cmd 60/00:18:50:c7:64/01:00:02:00:00/40 tag 3 ncq 131072 in [ 7.547423] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547568] ata1.00: status: { DRDY } [ 7.547621] ata1.00: failed command: READ FPDMA QUEUED [ 7.547681] ata1.00: cmd 60/00:28:e0:4c:61/01:00:02:00:00/40 tag 5 ncq 131072 in [ 7.547682] res 40/00:28:e0:4c:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.547825] ata1.00: status: { DRDY } [ 7.547882] ata1: hard resetting link [ 7.864408] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.886351] ata1.00: configured for UDMA/133 [ 7.886375] ata1: EH complete [ 7.890012] ata1: limiting SATA link speed to 3.0 Gbps [ 7.890016] ata1.00: exception Emask 0x10 SAct 0x7 SErr 0x280100 action 0x6 frozen [ 7.890093] ata1.00: irq_stat 0x08000000, interface fatal error [ 7.890152] ata1: SError: { UnrecovData 10B8B BadCRC } [ 7.890210] ata1.00: failed command: READ FPDMA QUEUED [ 7.890272] ata1.00: cmd 60/00:00:90:33:48/01:00:02:00:00/40 tag 0 ncq 131072 in [ 7.890273] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890418] ata1.00: status: { DRDY } [ 7.890472] ata1.00: failed command: READ FPDMA QUEUED [ 7.890530] ata1.00: cmd 60/00:08:90:34:48/01:00:02:00:00/40 tag 1 ncq 131072 in [ 7.890531] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890672] ata1.00: status: { DRDY } [ 7.890724] ata1.00: failed command: READ FPDMA QUEUED [ 7.890781] ata1.00: cmd 60/78:10:e0:4f:61/00:00:02:00:00/40 tag 2 ncq 61440 in [ 7.890782] res 40/00:10:e0:4f:61/00:00:02:00:00/40 Emask 0x10 (ATA bus error) [ 7.890925] ata1.00: status: { DRDY } [ 7.890981] ata1: hard resetting link [ 8.208021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 8.230100] ata1.00: configured for UDMA/133 [ 8.230124] ata1: EH complete Looks like the SATA interface tries to use 6Gbps link, then fails miserably and Linux fallbacks to 3Gbps. This is somewhat fine for me, as the system boots successfully each time and works under high load (cd linux-3.2.8; make -j16). I've also ran memtest86+ and it did not find any errors. What concerns me more is that Grub sometimes takes a long time to load the images and/or fails to load itself completely. The error is consistent and is probablistic: that is, each time I boot I have a certain chance to fail. Actually, I have a slight suspiction on the cause of the failure. Look at the cabling: What kind of engineer does it this way? Nah. Even 1Gbps Ethernet hardly tolerates cables bent over a small angle, and there you have 6Gbps SATA. How cound I determine and fix the cause of errors and/or switch the link to 3Gbps mode permanently?

    Read the article

  • how to call sql string from nhibernate

    - by frosty
    i have the following method, at the moment it's return the whole sql string. How would i execute the following. using (ITransaction transaction = session.BeginTransaction()) { string sql = string.Format( @"DECLARE @Cost money SET @Cost = -1 select @Cost = MAX(Cost) from item_costings where Item_ID = {0} and {1} >= Qty1 and {1} <= Qty2 RETURN (@Cost)", itemId, quantity); string mystring = session .CreateSQLQuery(sql) .ToString(); transaction.Commit(); return mystring; } // EDIT here is the final version using criteria using (ISession session = NHibernateHelper.OpenSession()) { decimal cost = session .CreateCriteria(typeof (ItemCosting)) .SetProjection(Projections.Max("Cost")) .Add(Restrictions.Eq("ItemId", itemId)) .Add(Restrictions.Le("Qty1", quantity)) .Add(Restrictions.Ge("Qty2", quantity)) .UniqueResult<decimal>(); return cost; }

    Read the article

  • Probleme with id increment

    - by Mercer
    hello, when i do this request i have an error INSERT INTO FR_METIERPUBLI( D_NIDMTR, D_NIDPUBLI ) VALUES ( 'SELECT MAX( D_NIDMTR ) FROM FR_METIERPUBLI + 1', 1000 i want to increment my id

    Read the article

  • automatic id generation which is a primary key

    - by abhi
    in vb.net while entering a new entry i want to assign a record a unique id like in case of numeric i do this way Dim ItemID As Integer KAYAReqConn.Open() SQLCmd = New SqlCommand("SELECT ISNULL(MAX(ItemID),0) AS ItemID from MstItem", ReqConn) Dim dr As SqlDataReader dr = SQLCmd.ExecuteReader If dr.HasRows Then dr.Read() ItemID = dr("ItemID") + 1 End If dr.Close() in this case m using itemid as a unique id and the format is 1,2,3... and m finding out the max and assigning to a new record but how to assign if the previous id is of the a00001,a00002,a00003,a00004...so on. how i do i produce a unique id in this case

    Read the article

  • I need a groovy criteria to get all the elements after i make sort on nullable inner object

    - by user1773876
    I have two domain classes named IpPatient,Ward as shown below. class IpPatient { String ipRegNo Ward ward static constraints = { ward nullable:true ipRegNo nullable:false } } class Ward { String name; static constraints = { name nullable:true } } now i would like to create criteria like def criteria=IpPatient.createCriteria() return criteria.list(max:max , offset:offset) { order("ward.name","asc") createAlias('ward', 'ward', CriteriaSpecification.LEFT_JOIN) } At present IpPatient table has 13 records, where 8 records of IpPatient doesn't have ward because ward can be null. when i sort with wardName i am getting 5 records those contain ward. I need a criteria to get all the elements after i make sort on nullable inner object.

    Read the article

  • How to set up linux watchdog daemon with Intel 6300esb

    - by ACiD GRiM
    I've been searching for this on Google for sometime now and I have yet to find proper documentation on how to connect the kernel driver for my 6300esb watchdog timer to /dev/watchdog and ensure that watchdog daemon is keeping it alive. I am using RHEL compatible Scientific Linux 6.3 in a KVM virtual machine by the way Below is everything I've tried so far: dmesg|grep 6300 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 i6300ESB timer: initialized (0xffffc900008b8000). heartbeat=30 sec (nowayout=0) | ll /dev/watchdog crw-rw----. 1 root root 10, 130 Sep 22 22:25 /dev/watchdog | /etc/watchdog.conf #ping = 172.31.14.1 #ping = 172.26.1.255 #interface = eth0 file = /var/log/messages #change = 1407 # Uncomment to enable test. Setting one of these values to '0' disables it. # These values will hopefully never reboot your machine during normal use # (if your machine is really hung, the loadavg will go much higher than 25) max-load-1 = 24 max-load-5 = 18 max-load-15 = 12 # Note that this is the number of pages! # To get the real size, check how large the pagesize is on your machine. #min-memory = 1 #repair-binary = /usr/sbin/repair #test-binary = #test-timeout = watchdog-device = /dev/watchdog # Defaults compiled into the binary #temperature-device = #max-temperature = 120 # Defaults compiled into the binary #admin = root interval = 10 #logtick = 1 # This greatly decreases the chance that watchdog won't be scheduled before # your machine is really loaded realtime = yes priority = 1 # Check if syslogd is still running by enabling the following line #pidfile = /var/run/syslogd.pid Now maybe I'm not testing it correctly, but I would expecting that stopping the watchdog service would cause the /dev/watchdog to time out after 30 seconds and I should see the host reboot, however this does not happen. Also, here is my config for the KVM vm <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit sl6template or other application using the libvirt API. --> <domain type='kvm'> <name>sl6template</name> <uuid>960d0ac2-2e6a-5efa-87a3-6bb779e15b6a</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>Westmere</model> <vendor>Intel</vendor> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='require' name='aes'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/data/vms/sl6template.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:44:57:f6'/> <source bridge='br0.2'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:88:0f:42'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <watchdog model='i6300esb' action='reset'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </watchdog> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Any help is appreciated as the most I've found are patches to kvm and general softdog documentation or IPMI watchdog answers.

    Read the article

  • Port C's fread(&struct,....) to Python

    - by user287669
    Hey, I'm really struggling with this one. I'am trying to port a small piece of someone else's code to Python and this is what I have: typedef struct { uint8_t Y[LUMA_HEIGHT][LUMA_WIDTH]; uint8_t Cb[CHROMA_HEIGHT][CHROMA_WIDTH]; uint8_t Cr[CHROMA_HEIGHT][CHROMA_WIDTH]; } __attribute__((__packed__)) frame_t; frame_t frame; while (! feof(stdin)) { fread(&frame, 1, sizeof(frame), stdin); // DO SOME STUFF } Later I need to access the data like so: frame.Y[x][y] So I made a Class 'frame' in Python and inserted the corresponding variables(frame.Y, frame.Cb, frame.Cr). I have tried to sequentially map the data from Y[0][0] to Cr[MAX][MAX], even printed out the C struct in action but didn't manage to wrap my head around the method used to put the data in there. I've been struggling overnight with this and have to get back to the army tonight, so any immediate help is very welcome and appreciated. Thanks

    Read the article

  • regenerate the ID row in a MySQL Table with a Mysql's Script or PHP

    - by DomingoSL
    Hello, i have a database fill with information of the users who use my webpage. The table as many MySql tables have the ID parameters who is autoincrement. The issue is that when somebody eliminate his account from the site, in the database remain a jump in the sequence that i dont want cuz i have a script who fail if find some jump in the ID. Ex. ID Name PASS 1 Jhon 1234 2 Max 2233 3 Jorge 2232 If Max get out and a new user go in, this is what will happend. ID Name PASS 1 Jhon 1234 4 NewU 1133 3 Jorge 2232 So what is the best way to erase some body from the data base in order to avoid this isuue, or if is not a way, its posible to do a PHP or MySql script who eliminate all the contents in the ID row and regenerate it in order? Thanks A lot! sorry for my english

    Read the article

  • SQL Server Group Concat with Different characters

    - by Molloch
    I have looked through a number of solutions to emulating "Group concat" functionality in SQL Server. I wanted to make a more human readable solution though and I can't work out how to do it. I have a view: ParentID | ChildName Which contains the records, for example: 1 | Max 1 | Jessie 2 | Steven 2 | Lucy 2 | Jake 3 | Mark I want to "Group Concat" these to get: 1 | Max and Jessie 2 | Steven, Lucy and Jake 3 | Mark So If there is only 1 child, just return name, if there are more than one, concat the last 2 with an ' and ' and all others with a ', '. I am a bit stuck on how to do this without resorting to CLR, which I don't want to do. I am happy with a function - but speed is an issue and how do I determine the child number so I can choose between ' and ', ', ' or ''?

    Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >