Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 660/761 | < Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >

• Some URLs fail to load on Windows web portal

  - by jpolache

  I’m working in a large data center and have been assigned to troubleshoot and issue with a windows (IIS) web server that acts as a portal for a customer of the data center. This portal server is on a DMZ at the local data center. I don’t have access to the portal desktop and am relying on an off-site administrator to work with me to do testing and report the condition of the portal. He tells me there are no software firewalls or other filtering configured. While most of the remote web pages work fine, several of the URSs the portal is suppose to serve up fail to load. I had wireshark installed on the portal system and had a capture taken of one of the failures. I used IE to access one of the remote web servers at issue. I could see the TCP SYN-ACK coming back from the remote server, but after several HTTP GETs fail to get a response the portal server sends a reset. The webmaster of the remote web server assures me that no sites are being blocked. I had a capture taken outside the local firewall, so there should be no issue there. Another tech set up a laptop and used the IP address of the portal (we took the portal off-line for the test). The laptop loads the URL as expected. I tried having Firefox loaded to make sure that the HTTP GET was not mal-formed. Same failure as with IE. So, it seems it is not the remote web server or the network, because there was no problem with the laptop. At this point, I’m not sure what other questions to ask or tests to do.

  Read the article

• OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

  - by sicn

  I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

  Read the article

• Mac "Steam needs to be online to update" - 404 fetching *_osx.zip.*

  - by Chris Boyle

  Since yesterday evening, when I launch Steam on OSX, a self-update progress bar appears instead (at 0 of 30MB or so). This bar does not advance, an error dialog appears: Steam needs to be online to update Please confirm your network connection and try again. The app then exits. This happens whether wifi or ethernet or both are connected, and pings to the outside world succeed throughout. If I look at the logs in Console, they are very similar to this example (though that's not mine). Specifically: Success! http://store.steampowered.com/public/client/steam_client_osx?date=718277 [...] Failed! http://cdn.store.steampowered.com/public/client/breakpad_osx.zip.27f59114a86fcd50533e1d7b128f9300947f9969 Failed! http://cdn.store.steampowered.com/public/client/steam_osx.zip.11a99384214805f2dd3be5084ba6be61d662f8ac Failed! http://cdn.store.steampowered.com/public/client/miles_osx.zip.d9fb546541f59c1fdd03962a605236b1021abab8 Requesting the first URL successfully returns some data including the filenames of the latter three, and requesting any of those gives me a 404 (I've tried multiple clients on multiple continents). Searches on Google and Twitter show about 10-20 others having this problem in the past 24 hours, but hardly the angry mob I'd expect if the problem affected all Steam OSX users. Things that have already been tried with no effect: Switching between wifi and ethernet. Killing all Steam processes including ipcserver. Moving the ~/Library/Application Support/Steam/registry.vdf file away. Requesting those URLs with other clients and from other locations. Interesting: that first URL with the date parameter returns the same content even without that parameter (thus would lead to the same 404s) suggesting that the problem is not necessarily specific to coming from a particular currently-installed version of Steam.

  Read the article

• Basic OpenVPN setup

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You

  Read the article

• IIS 6 + ASP.NET web service - DW20 and stackoverflow exception

  - by pcampbell

  Consider an ASP.NET SOAP web service that starts up fine, but craters hard when receiving its first hit. Please note that this is deployment works in the Test environment, but not in the PreProd environment. Both are Windows 2003 SP3 + IIS 6 + ASP.NET 3.5. All up-to-date. The behaviour that we're seeing is: restart the site & app pool the app pool is configured to run under Network Service. browsing to the .asmx and .wsdl responds normally, as expected. send a normal well-formed SOAP request / normal payload to the web service 100% CPU usage after 5 seconds, the page request / site returns "Service Unavailable" no entry is created in the IIS log file (i.e. c:\windows\system32\logfiles\W3C-foo) the app pool ends up being stopped The processes that hit the CPU hard are dw20.exe. I am unsure why Dr Watson is involved here. Event Log shows an ASP.NET Runtime error: Task Manager: Event log text: EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.3959, P3 45d6968e, P4 errormanagement, P5 1.0.0.0, P6 4b86a13f, P7 24, P8 0, P9 system.stackoverflowexception, P10 NIL. Questions Any thoughts on what this system.stackoverflow exception might be? Given that the code is the same between environments, might it be a payload problem? Could it be a configuration issue? You can see the name of my .NET assembly there in the exception message: "ErrorManagement"

  Read the article

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  Hey, short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• Multiple Internet connections, multiple networks and split access in Linux

  - by Swapneel Patnekar

  I am having trouble setting up multiple internet connections for split access in Linux. We have 3 internet connections from 3 different ISP's. We want to configure our Linux gateway machine such that our three internal networks 10.2.1.0/24, 192.168.20.0/24 & 192.168.2.0/24 use ISP1, ISP2 and ISP3 respectively in a split access manner. Outlined below is the layout/settings, Interfaces of the Linux Gateway connected to Routers: eth0: 10.1.1.2<---------->10.1.1.1(Internal Interface of ADSL Router)[ISP1] eth1: 192.168.15.2<------>192.168.15.1(Internal Interface of 3G Router)[ISP2] eth3: 192.168.1.2<------->192.168.1.1(Internal Interface of ADSL Router)[ISP3] Kindly note that none of the interfaces in the Linux gateway has a public static IP address. Routers of ISP1 and ISP2 get assigned a dynamic public IP address when connected to the Internet, router of ISP3 has been assigned a public static IP address. Interface of Linux gateway connected to a switch, eth4: 10.2.1.1(LAN Interface for ISP1) eth4:0 192.168.20.1(LAN interface for ISP2) eth4:1 192.168.2.1(LAN Interface for ISP3) eth4:0 & eth4:1 are virtual interfaces with eth4 being the interface connected physically. Based on http://linux-ip.net/html/adv-multi-internet.html I've set the following routes, ip route flush table 4 ip route show table main | grep -Ev ^default | while read ROUTE ; do ip route add table 4 $ROUTE done ip route add table 4 default via 192.168.15.1 ip rule add fwmark 4 table 4 ip route flush cache Additionally, using the following iptables rules to mark & route packets as per the guide mentioned above : http://pastebin.com/KzWHFGJA At this point, computers from 192.168.2.0/24 network are successfully able to reach the Internet through ISP3. 192.168.20.0/24 and 10.2.1.0/24 are unable to access the Internet through ISP1 and ISP2 respectively. Any inputs will be much appreciated !

  Read the article

• Sniffing at work- How to detect

  - by coffeeaddict

  Because of the place I work has some real issues (people) especially in IT and the owner, I wonder if we are being sniffed. Is there any way to tell if on a Vista 64-bit machine: 1) In system logs some identification that would tell me that someone might log into my PC such as an Admin 2) Something in the logs that would give me a flag about maybe I'm being monitored some other way? 3) How can I be sure that my gmail, hotmail, and chat is not being sniffed. I know there are things like Simp, etc. I'm talking about specific hidden system signs either in registry or logs. Obviously I'm not going to raise any suspicion by me asking our network admin. I don't trust anyone at this company. is there a good way to basically monitor for this as an end user? Could someone log in and basically watch me work and if so, would there be any goodies left behind for me to find out if this has happened other than visual signs which would not be present...maybe some running processes?

  Read the article

• What Wireless Router/ADSL Modem to get? N-band a must!!

  - by JJarava

  I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

  Read the article

• Apache mod_proxy with SSL not redirecting

  - by simonszu

  I have a custom server running behind an apache reverse proxy. Since the custom server can only handle HTTP traffic, i am trying to use apache for wrapping proper SSL around it, and for some kind of HTTP authentication. So i enabled mod_proxy and mod_ssl and modified sites-available/default-ssl. The config is as following: <Location /server> order deny,allow allow from all AuthType Basic AuthName "Please log in" AuthUserFile /etc/apache2/htpasswd Require valid-user ProxyPass http://192.168.1.102:8181/server ProxyPassReverse http://192.168.1.102:8181/server </Location> The custom server is accessible from the internal network via the location specified in the ProxyPass directive. However, when the proxy is accessed from the outside, it presents the login prompt, and after successfully authenticated, i get a blank page with the words The resource can be found at http://192.168.1.102:8181/server. When i type the external URL again in an already authenticated browser instance, i am properly redirected to the server frontend. The access.log is full of entrys stating that my browser does successful GET requests, and the proxy is happily serving the /server ressource. However, the ressource isn't containing the server's frontend, but this blank page with these words on it.

  Read the article

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• Gerrit ssh key setup on windows server

  - by hotpotato

  I am attempting to configure google's 'Gerrit' code review web app on a Windows server 2008 virtual machine on our internal network. We are using Apache Tomcat (6.0.36) to host the web app and have deployed the gerrit.war to tomcats webapp folder, setup the context.xml, web.xml etc for the web app correctly i believe. However when i startup Tomcat using the $CATALINA_HOME/bin/startup.bat i get the following message in the tomcat logs: *Dec 07, 2012 1:03:54 PM org.apache.catalina.core.StandardContext listenerStart SEVERE: Exception sending context initialized event to listener instance of class com.google.gerrit.httpd.WebAppInitializer com.google.inject.CreationException: Guice creation errors:* 1) No SSH keys under C:\Gerrit\config\etc while locating com.google.gerrit.sshd.HostKeyProvider at com.google.gerrit.sshd.SshModule.configure(SshModule.java:90) I have created a is_rsa.pub SSH key and placed it in the specified directory to no avail. I have been googling this for about a week now and can't seem to find any information about the file or format it is expecting... documentation on setting gerrit up on windows seems hard to come by! Can anyone provide useful information about how to correctly configure a host SSH key in this context?

  Read the article

• Snow Leopard takes a long time to connect to Windows/Samba server

  - by hood

  We run a very heterogeneous network here: There is some XP, Vista, 7, Leopard, Snow Leopard clients, and Windows 2003 (one remaining legacy app), 2008, and Linux servers. The main file server runs Ubuntu Linux and has been added to the Windows Domain and has been used for many years; SBS 2008 is the PDC (the 2003 and 2008 are on the domain also). In Leopard there were no problems at all authenticating to the file servers. We've upgraded one of the Leopard iMacs to Snow Leopard, though the same problem occurs in a new MBP which came with the newer OS as well as a clean install on another iMac. It does not matter whether connected through wired or wireless. In the Finder when clicking on the server - whether on first boot or after it is connected - it will display "Connecting..." for up to a few minutes before either generally working (if username/password in keychain) or displaying "Connection Failed" - at which time clicking "Connect As" and typing in the username/password will take some more time and eventually work. Sometimes it will display "Connecting..." indefinitely. (I've left it as long as 15 minutes before trying something else) Accessing shares on the the 2003 and SBS servers have the problem (so I don't think it's a Samba server issue). The Server 2008 Standard is connecting instantly at the moment. Accessing the share through an alias/stacks doesn't have this problem. Leopard and Windows clients still have no problem. I've searched Google but hasn't yielded any working result. How do I get rid of this delay?

  Read the article

• How to diagnose a hang when creating a new folder in explorer.exe

  - by Jack Ukleja

  I have been having some issues with explorer.exe hanging when I create a new folder. If I use Analyse Wait Chain in the Resource Monitor it says "One or more threads of explorer.exe are waiting to finish network I/O". When I look at the offending thread in Process Explorer it reveals nothing interesting: ntdll.dll!ZwWaitForMultipleObjects+0xa KERNELBASE.dll!GetCurrentThread+0x36 kernel32.dll!WaitForMultipleObjectsEx+0xb3 USER32.dll!PeekMessageW+0x1cd USER32.dll!MsgWaitForMultipleObjectsEx+0x2a USER32.dll!MsgWaitForMultipleObjects+0x20 SHELL32.dll!SHAppBarMessage+0x41e SHELL32.dll!DragAcceptFiles+0x2a3c SHELL32.dll!DragAcceptFiles+0x2a4f SHELL32.dll!Ordinal211+0x124 SHELL32.dll!SHChangeNotification_Unlock+0x12f4 USER32.dll!GetSystemMetrics+0x2b1 USER32.dll!IsDialogMessageW+0x19b USER32.dll!IsDialogMessageW+0x1e1 ntdll.dll!KiUserCallbackDispatcher+0x1f USER32.dll!PeekMessageW+0xba USER32.dll!PeekMessageW+0x89 SHELL32.dll!SHChangeNotification_Unlock+0xd9f SHELL32.dll!Ordinal885+0x1407 SHLWAPI.dll!SHRegGetUSValueW+0x306 kernel32.dll!BaseThreadInitThunk+0xd ntdll.dll!RtlUserThreadStart+0x21 While I was looking at the explorer.exe threads I did notice a fair few that talk about ETW (Event Tracing for Windows) so obviously explorer.exe uses tracing. So I decided to try and user TraceView.exe to try and listen in on the explorer.exe traces. The problem is TraceView requires some difficult-to-come-by stuff... either pdbs, or CTL files, and .TMF files. I tried using the explorer.pdb that comes with the Windows SDK but that did not work. I do not see explorer.exe in the "named providers". And I have no idea where to locate the ctl or .TMF files for explorer.exe. So the question is: Is there a way to view the ETW trace messages from explorer? Or shall I just not bother and go back to the age old technique of disabling every explorer extenion one-by-one in the hope its one of them. (Prefer the former as I like to get to the bottom of things!!)

  Read the article

• How have I locked me out from my Ubuntu VPS?

  - by Sanoj

  I have a Ubuntu Server as VPS (OpenVZ), and yesterday I installed php-fpm, but I guess something went wrong with the installation. Because since then I cannot log in to my server over SSH with PuTTY or using WinSCP. The message I get when connecting is Network error: Connection timed out. Immediately after the installation I was not able to use emacs either, I had to re-install it with apt-get install emacs. I have tried with clearing the firewall and rebooting the server from my web-based "control panel", but it doesn't help. The commands I used for installation of the PHP-fpm was from Installing PHP 5.3, Nginx And PHP-fpm On Ubuntu/Debian. And I guess it has something to do with these commands: cd /tmp wget http://us.archive.ubuntu.com/ubuntu/pool/main/k/krb5/libkrb53_1.6.dfsg.4~beta1-5ubuntu2_i386.deb wget http://us.archive.ubuntu.com/ubuntu/pool/main/i/icu/libicu38_3.8-6ubuntu0.2_i386.deb sudo dpkg -i *.deb sudo echo "deb http://php53.dotdeb.org stable all" >> /etc/apt/sources.list sudo apt-get update sudo apt-get install php5-cli php5-common php5-suhosin sudo apt-get install php5-fpm php5-cgi The web-sites that are hosted from my server works fine. Anyone that have the same experience or know how this could happen? I guess that I have to re-install Ubuntu Server from my "control panel" now, but I would like to avoid this situation in the future. Finally, I have backup on everything so nothing is lost if I have to re-install the machine.

  Read the article

• Windows Home Server installation fails because it can't find the DVD drive anymore

  - by BBlake

  I've got an old Dell Dimension 8300 desktop I decided to convert into a WHS box. I popped in a pair of 1 TB SATA drives, which were recognized fine by the BIOS and the currently installed OS (XP), so I decided to go ahead and install WHS. Near the end of the installation, WHS acts like it can no longer find the DVD drives (either of them, the box has a DVDROM and a DVDRW). The specific error is gives is the "Can't configure storage" error. I've found several forums where people say they get this error if they remove the boot DVD during the installation (at the time of the first reboot). However, I never removed the DVD. After the error, if fails into WHS, so it did mostly install and I can work with WHS. However, it refuses to recognize the network card, video card and while it shows the two DVD drives, any CD/DVD I insert in either drive the system says is corrupted and unreadable, even though none of them are. I've tried several reinstalls both removing and not removing the DVD, but the result is the same regardless. Any other tricks anyone found? If I can't figure this out, maybe I'll just install SBS2008 and fake it up to be similar to WHS with some addin tools. Shouldn't be too hard to create something since WHS is based on SBS2003 anyway.

  Read the article

• Hard Drive benchmark values show write very very slow

  - by John

  I recently started to have issues with my laptop being very slow. I ran a hard drive benchmarking tool (by ATTO) that showed that the write speed was very very slow on my boot drive. I ran the same benchmark on my usb drive and it was 650 times faster than my boot drive when it came to writing. Reading is very fast/normal on both. I swapped out an identical drive and ran the same benchmark. This time the drive showed proper write speed. Thinking that I had a hard drive going bad I cloned the old one onto the new one. I managed to clone the problem too. Anyone have any ideas on what in WinXP SP3 might be causing the write issues? I am on a corporate network and we have commercial anti-virus software installed. (AVG I think) I regularly run defraggler and have about 40 gig free on a 100 gig drive. The machine has 4 gigs of memory. Any ideas? TIA J

  Read the article

• Trouble with IIS SMTP relaying to Gmail

  - by saille

  I appreciate that similar questions have been asked about how to setup SMTP relaying with IIS's virtual SMTP server. However I'm still completely stumped on this problem. Here's the setup: IIS 6.0 SMTP server running on Win2k3 box with a NAT'ed IP. Company uses Gmail for all email services. An app on the box needs to send email, so normally we'd just set the app up to talk to smtp.gmail.com directly, but this app doesn't support TLS. Easy, we just setup a local SMTP relay right? So I thought. What we have done so far: Setup IIS SMTP server to relay to smtp.gmail.com, as per these excellent instructions: http://fmuntean.wordpress.com/2008/10/26/how-to-configure-iis-smtp-server-to-forward-emails-using-a-gmail-account/ The local SMTP relay allows anonymous access. Both the local IP and the loopback IP have been explicitly allowed in the Connection and Relay dialogs. Tried sending email from 2 different apps via the local SMTP server, but failed (the emails end up in the Queue folder, but never get sent). The IIS logs show the conversation with the local app, but zero conversation happening with smtp.gmail.com. The port used by gmail is open outbound, and indeed the apps we have that support TLS can send email directly via smtp.gmail.com, so there is no problem with the network. At this point I changed the smtp settings in IIS SMTP server to use a different external SMTP server and hey-presto, the local apps can send email via local IIS SMTP relay. So smtp.gmail.com fails to work with our IIS SMTP relay, but another 3rd party SMTP service works fine. We need to use smtp.gmail.com, so how to troubleshoot this one?

  Read the article

• Trying to understand Wireless N vs Wireless AC

  - by EGHDK

  Whenever a new wireless standard gets approved you expect faster speeds and longer range. From everything that I've read about it, it seems that AC will only transfer over the 5GHz band and up to 3Gbps. Studying the new AC routers on the market, it seems that they will transfer over 5GHz and 2.4GHz. And 5GHz will only transfer at 1.3Gbps. Which isn't what AC is supposed to be. I know there is a difference between what the standard actually says, and what products will actually do, but is there any reason for this? Is there any other main differences between AC and N? I've heard people discussing AC and saying that it's finally "fixing" what N was supposed to fix... what do they mean by that? Any security benefits? I have seen this image online: Will AC really do that? Will that require an AC network card in my laptop for that to actually happen? Lastly, will the router only be able to communicate with AC devices if I have beamforming technology on? I know it's a ton of questions, but most articles online seem to be outdated, and don't provide too much reliability.

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• Win 2008 R2 - copying TO disk is very slow, copying FROM is more or less okay

  - by avs099

  I have Windows 2008 R2 SP1 with 4 identical SATA disks (Seagate Barracude 7200) in RAID 5 array. It has 4Gb of memory; all recent updates are installed. Problem: when I copy large file from one folder to another, I get about 10MB/s average speed. When I read this file from network share via 1Gbps connection - I get about 25-30 MB/s. Both numbers seems to be low for me - but specifically I'm very frustrated with low write speed. there is no antivirus, no hyper-v, it's just a fileserver - i when i do my tests nobody else reads/write from it (we have only 4 people in a team, so I'm sure). Not sure if that matters, but there is only 1 logic disk "C" with all available space (1400 GB). I'm not an admin at all, so I have no idea where to look and what other information to provide. I did run performance monitor with "% idle time", "avg bytes read", "avg byte write" - here is the screenshot: I'm not sure why there are such obvious spikes. Any idea? Please let me know if you need me to provide more information - what counters should I check, etc. I'm very eager to get this solved. Thank you. UPDATE: we have another Windows 2008 R2 SP1 server with 2 RAID1 arrays - one is disk C (where windows is installed, another one is disk E). It is running Hyper-V and does not have antivirus. I noticed the following behavior when I copy large file (few GBs): C - C: about 50MB/sec C - E: about 55MB/sec E - E: 8MB/sec!!! E - C: 8MB/sec!!! what could cause this?? E drive is RAID1 array from same Seagate Barracuda 1TB drives..

  Read the article

• MySQL Workbench is not finding MySQL service? [closed]

  - by PhADDinTraining

  I set up a local MySQL server, currently with no databases. I'm trying to create a new server instance profile in MySQL Workbench to manage the server, and during the Create New Server Instance Profile wizard, it gets to the Windows Management section and tells me that No MySQL service found. I went into Task Manager and found the process mysqld.exe to be running, under the user name of NETWORK SERVICE. Then I went into the Services tab and found that MySQLServerName (I custom named the Windows service) is also there, and status is running. I ran cports and looked at what ports mysqld.exe is using, and ran a telnet command on that port. It's reporting that the port is being listened in on. I then ran the MySQL Command Line Client to be sure, and after \r it gives me a proper connection ID and a list of databases (NONE at this point). But with all this, I can't make the wizard find a running service. I've Googled this and found no answers, so please, if someone would help shed some light on this issue that'd be great!

  Read the article

• Throughput; capacity planning help for C10K like design

  - by z8000

  I am designing a network service in which clients connect and stay connected -- the model is not far off from IRC less the s2s connections. I could use some help understanding how to do capacity planning, in particular with the system resource costs associated with handling messages from/to clients. There's an article that tried to get 1 million clients connected to the same server [1]. Of course, most of these clients were completely idle in the test. If the clients sent a message every 5 seconds or so the system would surely be brought to its knees. But... How do you do less hand-waving and you know, measure such a breaking point? We're talking about messages being sent by a client over a TCP socket, into the kernel, and read by an application. The data is shuffled around in memory from one buffer to another. Do I need to consider memory throughput ("5 GT/s" [2], etc.)? I'm pretty sure I have the ability to measure the basic memory requirements due to TCP/IP buffers, expected bandwidth, and CPU resources required to process messages. I'm a little dim on what I'm calling "thoughput". Help! Also, does anyone really do this? Or, do most people sort of hand-wave and see what the real world offers, and then react appropriately? [1] http://www.metabrew.com/article/a-million-user-comet-application-with-mochiweb-part-3/ [2] http://en.wikipedia.org/wiki/GT/s

  Read the article

• Problems with word completion on Windows Mobile

  - by Rowland Shaw

  For "some reason" the word completion function on my windows mobile phone (HTC Diamond, rebadged as a T-Mobile MDA Compact IV (UK) running WM6.1 with HTC Touch Flo 3D) hasn't worked since one of my firends was taking a look at the phone (I remember him bitching about it being too obtrusive for him, as an iPhone fanboy). I've checked all the obvious settings ( Start Input Word Completion ) and everything looks set there; I tried a hard reset, to no avail and even tried upgrading the ROM t the latest from my network provider. I even tried walking into the store where I bought the phone, and the staff couldn't fix the issue. I still have my old handset, which also runs WM6.1 (a T-Mobile MDA Compact III (UK), albeit without Touch Flo 3D), and the word completion works on there, so I'm a little confused as to why I can't get it to work again on my new handset. Can anybody identify why this might not be working, or help me fix it? Edit: Even "Touch Input Settings" has both "Word Completion in T9 mode" and "Word Completion in ABC mode" checked. The full qwerty keyboard option is in T9 mode, and word completion works for this input method; It still does not work for my preferred, "Letter Recogniser" method.

  Read the article

• Where do I define a group policy that will set a users desktop background color to green the first time they log in?

  - by Tyler

  Servers: W2k8 R2 x64 Desktops: Win7 Pro x64 Our current group policy uses a custom ADM file to define certain properties of the desktop (Background Image (centered), Background Color is green (00 74 00)). This policy works for us, but the down-side is that policies defined in our custom ADM are only applied after a GPUpdate /Force is applied. We would like these desktop theme settings to be applied the first time the user logs onto the computer. I've been working on a new policy that forces the computer to wait for the network when the user logs on to handle folder redirection. The reason for writing the new policy was to resolve the issue that a user needs to run GPupdate /Force the first time they log in, so it doesn't make sense for me to implement the new policy if there is still something that requires GPUpdate /Force to get the user in the state that we want them. I've moved the setting for background image out into Admin Templates- Desktop- Desktop- "Desktop Wallpaper" so this is now being set properly when the user first logs in. Now I'm left with a black background until I force a group policy update. I have tried to play around with setting a default "Theme" and had limited success; this was not reliable enough to call a solution. I suppose I could set the background color with a script? Any thoughts? It feels like I'm missing something obvious, or that this should be much easier than it is.

  Read the article

< Previous Page | 656 657 658 659 660 661 662 663 664 665 666 667  | Next Page >