Search Results

Search found 21053 results on 843 pages for 'out of process'.

Page 661/843 | < Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668  | Next Page >

• High memory utilization with firebird + windows server 2008 r2

  - by chesterman

  i have a Windows Server 2008 R2 (64bit) running a 64bit installation of Firebird 2.1.4.18393_0 in a 4GB phisical server. After a while, the task manager show that all memory is used, but the sum of the memory of all process does not stack to the half of the memory. Unfortunally, it's start swapping. Using RAMMAP, i can see that my entire database file is mapped into the memory. This only occours in windows server 2008 r2 and windows 7 64 bit. i can use firebird 32 or 64bit installations, doesn't matter. How can i prevent this? Why this only occours in w2k8r2 and w7? tks in advance ** UPDATE Aparently, this occours by the use of all memory by the file system cache. The microsoft documentations explain that this WAS a issue in windows xp, 2k3, vista and 2k8, but it was solved in 7 and 2k8r2. also adds that this issue is more common in 64bit hosts. (http://support.microsoft.com/kb/976618) there are some tools (DynCache, setcache and the Get/SetSystemFileCacheSize system calls from windows API) that allows me to fix a upper limit to the memory usage by the fscache, but the documentation argues that i should not do this in w2k8r2 because it will severely impact on the overall system performance. anyway, i tried, the performance remained the same shit and the use of the page file remained, although there is now more the 1gb of free memory.

  Read the article

• PHP / SSH2 Multi-threading

  - by Asad Moeen

  I'm basically done using SSH2 with PHP. Some may already that while using it, the PHP code actually waits for all the listed commands to be executed in SSH and when everything is done, it then gives back the results. Where that is fine for the work I am doing, but I need some commands to be multi-threaded. $cmd= MyCommand; echo $ssh-exec($cmd); So I just want this to run in parallel 2 times. I googled some stuff but didn't get along with it. For a basic thing, I came across to this way posted by someone but it didn't work out for me. for ($i = 0; $i < 2; $i += 1) { exec("php test_1.php $i > test.txt &"); //this will execute test_1.php and will leave this process executing in the background and will go to next iteration of the loop immediately without waiting the completion of the script in the test_1.php , $i is passed as argument . } I tried to put it this way exec("echo $ssh-exec($cmd) $i test.txt &"); in the loop but either it never entered the loop or the echo $ssh-exec failed. I don't really need a very neat multi-threading. Even a single second delay would do good, thank you.

  Read the article

• Retrieve a user's Exchange database in powershell

  - by Paul

  Hey Everyone, I've scoured the interwebs for a few days now off and on to find this. I am creating a powershell script for email-enabling new user's(Exchange 2007). To give you a little background when we have a new hire, their AD account is created at our off-site helpdesk, but they don't create their email account. I'm trying to automate the process of mail-enabling the user which involves putting them in the same database as an existing user, disable imap pop activesync, and lastly email the requester of the ticket. I would like to just get prompted for the New User's name, User to Replicate(mailbox, storage group, database), and the person to email after it's been created. So if someone could just help with a command to Retrieve a user's Exchange database in powershell that would be great, but if people also want to help with my hacked up script please do so as well!!! Here is what I have so far: Write-output “ENTER THE FOLLOWING DETAILS” $DName = Read-Host “User Diplay Name" $RUser = Read-Host "Replicate User(Database Grab)" ***$RData = #get the Replicate user's mailbox database here*** $REmail = #either just use a Read-Host “Requester's Email address" or ask for Requester's name and pipe through their email address by digging for it w/ powershell Enable-Mailbox -Identity "$DName" -Database "$RData" Send-MailMessage -From "John Doe <[email protected]>" -To (put $REmail here which is the Requester's email) -Subject "Test Person's email account" -Body "Test Person's email account has been setup.`n`n`nJohn Doe`nGeneric Company`nSystems Administrator`nOffice: 123.456.7890`[email protected]" -SmtpServer genericexchange.exchange.com

  Read the article

• Borked ubuntu uninstall - need to delete boot partition (i think)

  - by Max Williams

  I just got a new pc laptop with windows 7 and wanted to install Ubuntu on it. Which i did, no problem there, by downloading the installer, burning it to dvd then booting off the dvd and installing. Then, i realised that the new Ubuntu 12.04 uses the Unity desktop, which i immediately disliked, and after some research, began to hate. So, i decided (after a little googling) to install Linux Mint instead. So, thinking i'd better start from scratch, i went to the Windows 7 disk manager and wiped the Ubuntu partition that had been created. Now, when i start up, i get an error from grub, the ubuntu boot manager: error: unknown filesystem grub rescue> _ and a blinking cursor where i can enter commands. I suspect that what i've done is deleted the main ubuntu partition but NOT deleted another partition which is a boot partition, or something like that? Can anyone tell me how i can rescue or unbork this? I'd like to either a) get back to my original windows-only setup OR b) install linux mint off dvd (which i have), into the empty partition, fixing any grub confusion in the process. Any suggestions? Thanks, max BTW please don't answer if you're just going to tell me to stick with 12.04, or install a different distro or something. I definitely want Mint and just want to fix this mess - thanks :)

  Read the article

• What Windows service binds a NIC to the network?

  - by Bigbio2002

  I have a server that takes several minutes for the NIC to bind itself to the network upon startup (it has a statically-configured IP). This causes DNS/WINS/Intersite Messaging to fail to start, since they're dependent on a network connection. While I'm still attempting to find a root cause to this issue (I've done firmware updates, checked for any odd drivers/services, no luck so far), but in the meantime, I want to adjust the load order of services to ensure that the NIC binds first before these services attempt to start. The only question is, which service is it? The server is running Server 2008 R2 and only has one NIC installed. (On a side note, there are two other small but odd problems occuring with the server. The server had the issue described in KB2298620, which I've fixed. The other problem occurs in Windows Server Backup. No events appear in the upper portion of the window, despite the fact that backups are running in the background. Whenever I attempt to modify the backup schedule, it gives me the error "Not enough storage is available to process this command" and appears to fail, when, in fact, it actually succeeds. These may be separate issues, but something tells me that some of these might share a common root cause.)

  Read the article

• Dual-head monitor system Kubuntu 10.04

  - by andrii

  I have a notebook Asus V6X00V with 1400*1050 monitor(name: LVDS) and Dell Monitor 1920*1080 (VGA-0). I want to have a dual monitor system. At MS Windows everything is working fine. During the Kubuntu installation the Dell and the main notebook monitors have a right resolutions(1920*1080 & 1400*1050). But after some stage it have been changed to the 1152*864 for both. Now the right resolution is only during turning off process and when I am using the console. So it shows that system can use this resolutions. The problem is just in a settings. I am using Size & Orientation - System Settings for setting adjustment. Any option that changes resolution for any monitor or changing position(Absolute, Left Of, Right of and so on) cause the color line noise on the screens. I have tried xrandr: xrandr --output LVDS --mode 1400x1050 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1400x0 but have received the same result. I have find out that for example the previous version of Randr(1.2, now I have xrandr 1.3) need a xorg.conf file modification to create a big virtual screen, but kubuntu 10.4 don't have xorg.conf and I don't know should I modify xorg for 1.3 version of xrandr or not. Please help me to solve this problem

  Read the article

• Missing drive space in Server 2003

  - by Tim Brigham

  I have two drives used for SQL backups which for the last week have been acting strange - the free space indicated by windows is far off from what windirstat, etc indicates. There should only be about 60 GB of drive space used and there is about 160. This would match the utilization if the two last backup files were still residing on disk. SQL server is 2000, OS Server 2003 x64. Running on a VMware 5.0 cluster. OSSEC and McAfee for this system shows clean. My current plan is to temporarily attach one of these drives this drive to another VM for analysis. Is there anything more I should be looking at? There were a lot of pages on the net when I was looking for documentation on this issue but I haven't found this case described. EDIT: Unfortunately even a full reboot did not clear this behavior. I also used process explorer to look for open file handles. No dice.

  Read the article

• Creating multiple SFTP users for one account

  - by Tom Marthenal

  I'm in the process of migrating an aging shared-hosting system to more modern technologies. Right now, plain old insecure FTP is the only way for customers to access their files. I plan on replacing this with SFTP, but I need a way to create multiple SFTP users that correspond to one UNIX account. A customer has one account on the machine (e.g. customer) with a home directory like /home/customer/. Our clients are used to being able to create an arbitrary number of FTP accounts for their domains (to give out to different people). We need the same capability with SFTP. My first thought is to use SSH keys and just add each new "user" to authorized_keys, but this is confusing for our customers, many of whom are not technically-inclined and would prefer to stick with passwords. SSH is not an issue, only SFTP is available. How can we create multiple SFTP accounts (customer, customer_developer1, customer_developer2, etc.) that all function as equivalents and don't interfere with file permissions (ideally, all files should retain customer as their owner)? My initial thought was some kind of PAM module, but I don't have a clear idea of how to accomplish this within our constraints. We are open to using an alternative SSH daemon if OpenSSH isn't suitable for our situation; again, it needs to support only SFTP and not SSH. Currently our SSH configuration has this appended to it in order to jail the users in their own directories: # all customers have group 'customer' Match group customer ChrootDirectory /home/%u # jail in home directories AllowTcpForwarding no X11Forwarding no ForceCommand internal-sftp # force SFTP PasswordAuthentication yes # for non-customer accounts we use keys instead Our servers are running Ubuntu 12.04 LTS.

  Read the article

• OpenVPN-based VPN server on same system it's "protecting": feasible?

  - by Johnny Utahh

  Scenario: hosted machine (typically a VPS) serving wiki, svn, git, forums, email lists (eg: GNU mailman), Bugzilla (etc) privately to < 20 people. People not on team not allowed access. Seeking VPN-restricted access to said server. Have good user experience with OpenVPN-based servers/clients, but have yet to server-admin such systems. Otherwise, experienced Linux sysadmin. Target system: Ubuntu, probably 12.04. Seeking to put an OpenVPN process on above server to "protect" all the above-mentioned services, enabling only OpenVPN-authorized clients/processes to access above services. (Can easily acquire additional IP address(es) as needed for this setup.) Option: if absolutely needed, can employ an additional, dedicated, "VPN server" VPS simply to be my VPN server "front end." But prefer to have all server processes (VPN server plus other server apps) all running on same machine, if possible. Will consider further if dedicated-VPN-machine setup enables 1. easier installation/administration, 2. better/easier end-user experience, and/or 3. makes system significantly more secure. Any of above feasible? The main intention: create a VPN from purely-hosted resources, and not spend all the effort to make a non-VPN, secure site--which typically means "SSL wrapping" + all the continual webserver-application-update management. Let the VPN server deal with access security, and spend list time pushing said security "down" in the other apps/Apache.

  Read the article

• Automatic o/s reset on a dedicated internet browsing Windows 7 pc.

  - by camelCase

  I have just purchased a new Acer Revo nettop PC for dedicated internet browsing. It will be the only pc on a home network. My original plan was to install one virtual PC for family browsing, another for remote web based server administration and ban browser use from the host Windows 7 o/s. The idea was that I could recover to a fresh VHD image once a week to eliminate any build up of malware inside the browser VMs. However now I am looking for alternative solutions since the Intel Atom cpu does not have hardware VT support which Windows Virtual PC requires. Would it be possible to engineer some type of routine overnight host o/s wipe and recovery? I guess cyber cafes do something like this? The only user data that would need to be retained across a recovery would be browser bookmarks but these could be exported to remote service. Edit 1: I am thinking the o/s reset could be done via some disk image recovery process. Edit 2: Just had a brainwave. Routine browsing could be done via the new Google Chrome O/S. I have just seen a video of the Google Chrome o/s booting off a usb pen drive in seconds.

  Read the article

• TEMP environment variable occasionally set incorrectly

  - by Roger Lipscombe

  Occasionally, I find my TEMP and TMP environment variables set to C:\Windows\TEMP. They should be set to %USERPROFILE%\AppData\Local\Temp, and are configured correctly in System Properties. This manifests itself as error messages like the following: ---> System.InvalidOperationException: Unable to generate a temporary class (result=1). error CS2001: Source file 'C:\Windows\TEMP\gb_pz65v.0.cs' could not be found error CS2008: No inputs specified ...which occurs in various .NET applications (in particular Visual Studio 2010 or SQL Server Management Studio). Alternatively, SQL Server Management Studio will report: Value cannot be null. Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer) If I run PowerShell elevated, then $env:TEMP is set correctly. If I run PowerShell non-elevated, then it's not. I believe that it should be set correctly in both cases. If not, it's the wrong way round. The same is true for CMD.EXE. Rebooting fixes it, temporarily, until something breaks it again. Presumably something loaded into Explorer.exe is messing with its environment variables, but what? The values in the registry are correct, even while this is happening: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment has TEMP = %SYSTEMROOT%\Temp HKCU\Environment has TEMP = %USERPROFILE%\AppData\Local\Temp By setting a breakpoint on shell32!RegenerateUserEnvironment, I'm able to trap it when it happens, but I still don't know why explorer.exe is reading the wrong environment variables. I can reproduce it consistently by broadcasting a WM_SETTINGCHANGE message (I wrote a one-line C++ program to do this). Watching the activity in Process Monitor shows that explorer.exe doesn't even look at HKCU\Environment. What is going on?

  Read the article

• Processes spawned by taskset not respecting environment variables

  - by jonesy16

  I've run into an issue where an intel compiler generated program that I'm running with taskset has been putting its temporary files into the working directory instead of /tmp (defined by environment variable TMPDIR). If run by itself, it works correctly. If run with taskset (e.g. taskset -c 0 <program> Then it seems to completely ignore the TMPDIR environment variable. I then verified this by writing a quick bash script as follows: contents of test.sh: #!/bin/bash echo $TMPDIR When run by itself: $ export TMPDIR=/tmp $ test.sh /tmp When run through taskset: $ export TMPDIR=/tmp $ taskset -c 1 test.sh "" Another test. If I export the TMPDIR variable inside of my script and then use taskset to spawn a new process, it doesn't know about that variable: #!/bin/bash export TMPDIR=/tmp taskset -c 1 sh -c export When run, the list of exported variables does not include TMPDIR. It works correctly with any other exported environment variable. If i diff the output of: export and taskset -c 1 bash -c export Then I see that there are 4 changes. The taskset spawned export doesn't have LD_LIBRARY_PATH, NLSPATH (intel compiler variable), SHLVL is 3 instead of 1, and TMPDIR is missing. Can anyone tell me why?

  Read the article

• Can't connect to Server Manager from Windows 7

  - by SAdmin317

  I have a Windows 7 Pro 64bit with SP1 desktop that has RSAT tools installed. I opened Server Manager and can't connect to the server (Server 2008 R2 core). I followed the guide to enable everything on the server, added a registry key to enable read-only on the device manager as well. On the Windows 7 PC I turned on winrm, did the quick config, and added the server IP and name as trusted hosts. I still get an error when connecting. "Connecting to the remote server failed with the following error message: The WinRM client cannot process the requests. If the authentication scheme is different from Kerberos, or if the client computer is not joined to a domain, then HTTPS transport must be used or the destination machine must be added to the TrustedHosts configuration setting...." I also added the name of the server to the windows 7 /etc/hosts file. Ping the server name translates to the IP of the server. Also opened up the firewall for "Remote Volume Management" Both machines are on the same Workgroup, using the same Administrator account, with the same password. Any help appreciated.

  Read the article

• AHCI, Windows 7 and can only boot with Windows DVD present

  - by Rob Pridham

  Foolishly, I installed Windows 7 with my new SSD set to IDE. I would like to change it to AHCI. I have done this before, with a different motherboard. What happens: I set the controller to AHCI in the BIOS; I also check correct boot order On boot, I get the 'BOOTMGR not found' error I use the Windows Recovery Console on the DVD Diskpart etc can see the disks, and bootrec claims to have rewritten the MBR/bootloader I reboot, same problem Recovery Console again and it detects a problem, fixes, reboots Recovery Console again and it detects the OS, and a problem - fixes, reboots I ignore the 'press any key to boot from DVD' prompt Windows boots fine I restart without the DVD and I'm back to square one That optional 'press a key to boot from DVD' stage is something that the recovery process introduces - normally you have to choose to boot to the DVD at the BIOS stage. You also see this when installing Windows. I suspect that whatever temporary state that is is compatible with AHCI - but not the standard it returns to. I have done the msahci/iaStorV registry hacks to no avail (this worked with the previous board). I can put it back to IDE where normal service is resumed. The board is an Asus M5A99X, the southbridge is AMD SB950, and this is Windows 7 x64. I would quite like not to have to reinstall it again. Any ideas as to what I can do as a permanent fix?

  Read the article

• yum fails installing php53-devel.x86_64

  - by coding_hero

  I need to recompile php on a Fedora server because I need to use the --enable-zip flag. When trying to install the devel package, I get the following message. This is after a 'yum clean all': yum install php53-devel.x86_64 Loaded plugins: rhnplugin, security rhel-x86_64-server-5 | 1.4 kB 00:00 rhel-x86_64-server-5/primary | 4.9 MB 00:00 rhel-x86_64-server-5 14161/14161 Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php53-devel.x86_64 0:5.3.3-13.el5_8 set to be updated --> Processing Dependency: php53 = 5.3.3-13.el5_8 for package: php53-devel --> Finished Dependency Resolution php53-devel-5.3.3-13.el5_8.x86_64 from rhel-x86_64-server-5 has depsolving problems --> Missing Dependency: php53 = 5.3.3-13.el5_8 is needed by package php53-devel-5.3.3-13.el5_8.x86_64 (rhel-x86_64-server-5) Error: Missing Dependency: php53 = 5.3.3-13.el5_8 is needed by package php53-devel-5.3.3-13.el5_8.x86_64 (rhel-x86_64-server-5) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest Output of 'yum repolist': # yum repolist Loaded plugins: rhnplugin, security repo id repo name status rhel-x86_64-server-5 Red Hat Enterprise Linux (v. 5 for 64-bit x86_64) enabled: 14,161 repolist: 14,161

  Read the article

• Windows 7 hangs with 100% disk activity but only when online

  - by jeremy

  I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

  Read the article

• VPS goes slow at more than 20 users online at the same time

  - by hachiari

  I have 512 MB VPS (brustable to 1GB) Somehow, the site goes slow when there are about 10 users, and becomes impossible to load at 20 users online at the same time. I wonder what could be the problem for this. The bandwidth connection of the VPS is 1Gbps. Here is some settings in my VPS: KeepAlive Off <IfModule prefork.c> StartServers 7 MinSpareServers 7 MaxSpareServers 10 ServerLimit 64 MaxClients 64 MaxRequestsPerChild 0 </IfModule> my.cnf settings - calculated Max Memory 300MB Output from UNIXBENCH INDEX VALUES TEST BASELINE RESULT INDEX Dhrystone 2 using register variables 376783.7 13429727.4 356.4 Double-Precision Whetstone 83.1 1137.5 136.9 Execl Throughput 188.3 1637.4 87.0 File Copy 1024 bufsize 2000 maxblocks 2672.0 148868.0 557.1 File Copy 256 bufsize 500 maxblocks 1077.0 79430.0 737.5 File Read 4096 bufsize 8000 maxblocks 15382.0 1410009.0 916.7 Pipe Throughput 111814.6 4419722.0 395.3 Pipe-based Context Switching 15448.6 561505.1 363.5 Process Creation 569.3 10272.7 180.4 Shell Scripts (8 concurrent) 44.8 514.3 114.8 System Call Overhead 114433.5 3537373.8 309.1 ========= FINAL SCORE 295.0 I am afraid that the VPS company limit the number of connection to the VPS... is it possible? The server is in Japan, but the site has global traffic (some of the traffic are from countries with low speed connection). Could this be the problem? This is a serious problem :( my site just cant grow if this keeps on happening... please tell me if you have any idea. Thank You, Bryant

  Read the article

• Why can't I debug my ASP project through a remote desktop connection?

  - by Anthony Benavente

  I just asked this question in Stack Overflow but I figured this stack exchange forum is a better fit. It's been about a month of trying to figure out this problem and we've still not found a solution. We have about seven virtual machines on a server running Windows XP Professional w/ SP 3 all with Visual Studio Interdev and IIS 5.1 installed. Running the programs all work fine, but we just can't debug through remote desktop. When we are logged into the server console (through VM Sphere) and log into one of the virtual machines through there, we are able to debug properly. We figured the issue lies with some kind of permissions for Remote Desktop Users. We've tried nearly every article on the internet (exaggerating of course) and are about to give up hope. One more thing, when we are logged into the virtual machine through the server console and then remote in, the user that was logged into the console is kicked off but debugging works! Does remoting in trick the computer into giving us the correct permissions? I'm really not sure how it works. I know that this technology predates human history, but we are in the process of migrating from ASP Classic to ASP.NET Specs: - Windows XP Professional W/ SP3 - IIS 5.1 - Visual Studio 6 Interdev EDIT: By "debug" I mean running the project with breakpoints. Interdev doesn't stop at breakpoints.

  Read the article

• Replacing HD in an MacOS 10.6.8 server caused all shares to fail

  - by Cheesus

  I'm hoping someone might have a helpful suggestion about this problem. We have 2 MacOSX servers available for file sharing. (quad Xeons - 2GB RAM, both 10.6.8), No.1 is an Open Directory Master with 50+ user accounts, No.2 has only 2 local accounts (/local/Default) and looks at the OD Master for all user accounts (/LDAPv3/10.x.x.20/) Both servers have 3 internal HD's, The boot volume with only Server OS and minimal Apps. A 'DataShare' HD (500GB) and a backup drive (500GB). After upgrading the DataShare HD in Server No.2 from a small internal HD (500GB) to larger capacity (2TB) drive, users are unable to connect to shares on Server No.2. Users get an error "There are no shares available or you are not allowed to access them on the server" The process I followed was to use Carbon Copy Cloner to create an exact copy of the original data drive (keeps all ownership data, UID, permissions, last edit date and time). Everything booted up ok, no indication there was any issues. (Paths to the sharepoint look good) Notes during troubleshooting - Server1 is operating perfectly, all users can access shares and authenticate etc. - I've checked the SACL (Server Access Control List) settings is ok. - On Server2 in the Server Admin' app, I can see all the shares listed ok. The paths seem valid, I can disable / reenable the shares, no errors. - On Server2 'workgroup manager' lists all the accounts from the OD Master in the LDAP dir view. All seems fine from here. Basically everything looks normal but no file shares on Server2 can be accessed from regular users.

  Read the article

• How to better copy&paste big files over RDP?

  - by WebMAOhist

  Recently I was making a few attempts to copy&paste a big (1.2 GB) file to remote computer over RDP. The remote computer is virtual testing machine with MS Windows Server 2008 Datacenter. First I tried to copy&paste before midnight when the transfer speed was limited by client computer ISP to 100 kB/s. So, it required a few hours and I was forced to cancel transfer since remote desktop became too unresponsive and sluggish (slow). So, I re-started it over midnight when my local transfer speed is over 4 GB/s 4MB/s (sorry for typo). So, my impression is that independently on speed (broadband) of copy&paste transfer the remote computer becomes sluggish while copying over RDP. At the same time downloading from internet doesn't make remote host sluggish. AFAIU, it is because clipboard of remote computer and so its memory becomes overloaded by transfer. How can I control (restrict) the usage of clipboard for specific process (pasting of file)? What are the possible way to control it? Update: After reading that slow speed of transfer is caused by encryption used for copy&pasting over RDP and since I believe I am more interested in overall efficiency: both the time, or rapidness, of getting file as well as possibility to work without waiting, I changed the question title from: How to control the usage of remote desktop clipboard usage for pasting a big file? to How to better copy&paste big files over RDP? For example, is it better to copy&paste one huge (zip) archive or unzip it and copy paste a folder with unzipped files? And more exactly I wanted to ask: What are possible ways to improve overall experience: the speed of transfer (i.e. availability of needed file) responsiveness of remote host (making remote coputer available for work before completion of copy&pasting)?

  Read the article

• what is the reason behind window service stopped ,whether its due to LAN problems or any other issues

  - by Steve

  I have a windowservice which named Trunk which stopped one day i just want to know the reason behind it? this is an entry in the logs, Nov 15 17:54:04.318 :Trunk-1516:Trunk:handle_control_event:Received CTRL_LOGOFF_EVENT, ignore it Nov 25 15:54:52.157 :Trunk-1516:Trunk:ERROR - Process Restart Count (5) Exceeded for:C:\Program Files\secon\11.1.4\bin\vmd Nov 25 15:54:52.157 :Trunk-1516:Trunk:Stopping Trunk ... Nov 25 15:54:52.314 :Trunk-1516:Trunk:Shutting down, signaled C:\Program F Nov 20 15:54:20.345 :SCBridge.RegisterBridge:Exception in method: ScUtility.ScCommandException (0xa08990002): Exception from HRESULT: 0xa08990002 Supplemental Information: None available. at ScServer.ScServiceProcessorRegistryManager.Attach(String serviceProcessor, ScClientInformation clientInfo, FORCE_ATTACH_SPEC forceAttachToMaster) at ScServer.ScServiceProcessorRegistry.Attach(String serviceProcessor, Object clientInfo) at ScServer.ScServiceProcessorRegistry.Attach(String serviceProcessor) at ServerControlInterface.SCBridge.RegisterBridge(String SPName) for system APOLLOSP0 attempting to attach and register with the Bridge i had seen service is registered with specific account, so i thought that user logged off from the machine that may be the reason behind it or any LAN disconnection problem . But Having taken another look at the above entry we seem to have a constant failure being generated in vmd which causes Trunk to detect vmd requires a restart. Most of the time it works OK and the restart count is anything up to 4. In this case the Trunk log confirms that the Restart Count is 5 and so is considered to be exceeded. Presumably, this triggers the termination of the other services and Trunk is actually doing its job.So, coould this just be a timing issue and we need to increase the tolerance level (i.e restart count) or do we need to address the 0xa08990002 error in vmd?

  Read the article

• Users are getting a temporary profile

  - by Serhiy

  A bit about current setup: It is windows 2008 R2 AD servers (all of them are 2008R2) and couple locations which set as Sites. Each location has DFS on AD server. Roaming profiles are not used nor configured. Users have their home folder configured as mapped S: drive to DFS shared folder. For example: in profile tab user has: Home Folder - connect - S: to \\domain.com\dc\users\%username% We also have redirected Desktop, Documents and Downloads folders to \\domain.com\dc\users. Everything was fine. Suddenly (today), users in most locations lost their local profile (both XP and W7 desktops) and got temporary profiles. Also, it looks like local profile was created today (from folder properties). I checked events at couple machines and there is not errors related to profiles or logon process. I do not see issues in event logs at servers as well. Basically, I run out of ideas what is wrong and why machines lost their local profiles. PS: Laptop users do not have their folders redirected, but lost profiles as well.

  Read the article

• Run a rails server on Amazon EC2 [on hold]

  - by Jashwant

  Context: I've tried rubber gem, but that does not fulfill my requirements ( I needed to deploy on existing instance, so don't recommend me rubber) So, I followed this excellent tutorial http://stackoverflow.com/questions/15535140/installing-ruby-2-0-and-rails-4-0-0beta-on-aws-ec2 Now, I have ruby 2.0 and rails 4.0.0 running on AWS EC2. I successfully ran the server with RDS (mysql) as db and default webrick as server ( Using command rails server ) But, I've read that webrick is a development server and shouldn't be used at production. What I tried: I googled and came up with some alternatives. Capistrano Nginx / apache with passenger Passenger with Capistrano Unicorn Puma My Question: What exactly is capistrano / passenger ? Are they middleware to ease my deployment process ? I don't see any difficulty in doing rails server command. If they are just middleware, nginx with passenger and capistrano does not make any sense ? Why would I add a learning curve ( to learn nginx, passenger and capistrano configs) just to run my server ? I can just use nginx to deploy my app. Can't I ? What combination should I use on Amazon EC2 (or may be at any some other production server).

  Read the article

• I think my laptop just died

  - by Joel Coehoorn

  I have a Dell 1330M that as of about 15 minutes ago will no longer POST. What happened was I was working, stepped away for a moment, and when I came back it was turned off. I thought that was odd, but turned it on and things seemed fine. About 1/2 hour later it crashed and restarted, but came up fine again. It did this once more. At this point I was starting to get worried, but I hadn't had any problems with the laptop before and every crash was after doing some work in a virtual machine that I don't often use, so I at put the blame there. It didn't feel like it was overheating anywhere and there's no ozone smell of overheated electronics. Then it crashed a final time and now when I turn it on all I see is a bright screen with a bunch of vertical lines (noise). I've tried removing the memory sticks one at a time, but I get the same result with either memory stick in either slot. With no memory at all it stops earlier in the POST process and the screen is completely blank (black, no backlight). As I type this, I hear a double beep from the system about once every 10 minutes. I'm pretty sure the hard drive is fine because it fails during post, before anything off the drive is needed. The power supply seems good because the screen is nice and bright. It's not the RAM because swapping that around made no difference. The leaves motherboard (which I doubt and can replace) and CPU (which just might be changable). Any ideas? Is there any hope for this laptop? I'm rather fond of it and I'd have a hard time replacing it with anything near as nice.

  Read the article

• nginx redirect what is not coming from load balancing

  - by dawez

  I have nginx on SERVER1 that is acting as load balancing between SERVER1 and SERVER2 in SERVER1 I have the upstreams for the load balancing defined as : upstream de.server.com { # similar upstreams defined also for other languages # SELF SERVER1 server 127.0.0.1:8082 weight=3 max_fails=3 fail_timeout=2; # other SERVER2 server otherserverip:8082 max_fails=3 fail_timeout=2; } The load balancing config on SERVER1 is this one: server { listen 80; server_name ~^(?<LANG>de|es|fr)\.server\.com; location / { proxy_pass http://$LANG.server.com; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; # trying to pass a variable in the header to SERVER2 proxy_set_header Is-From-Load-Balancer 1; } } Then in server 2 I have: server { listen 8082; server_name localhost; root /var/www/server.com/public; # test output values add_header testloadbalancer $http_is_from_load_balancer; add_header testloadbalancer2 not_load_bal; ## other stuff here to process the request } I can see the "testloadbalancer" in the response header is set to 1 when the request is coming from the load balancing, it is not present when from a direct access: SERVER2:8082 . I would like to bounce back to the SERVER1 all the direct requests that are sent to SERVER2, but keep the ones from the load balancing. So this should forbid direct access to SERVER2:8082 and redirect to SERVER1:80 .

  Read the article

< Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668  | Next Page >