resource management - Page 661

Advantages of SQL Backup Pro

- by Grant Fritchey

Getting backups of your databases in place is a fundamental issue for protection of the business. Yes, I said business, not data, not databases, but business. Because of a lack of good, tested, backups, companies have gone completely out of business or suffered traumatic financial loss. That’s just a simple fact (outlined with a few examples here). So you want to get backups right. That’s a big part of why we make Red Gate SQL Backup Pro work the way it does. Yes, you could just use native backups, but you’ll be missing a few advantages that we provide over and above what you get out of the box from Microsoft. Let’s talk about them. Guidance If you’re a hard-core DBA with 20+ years of experience on every version of SQL Server and several other data platforms besides, you may already know what you need in order to get a set of tested backups in place. But, if you’re not, maybe a little help would be a good thing. To set up backups for your servers, we supply a wizard that will step you through the entire process. It will also act to guide you down good paths. For example, if your databases are in Full Recovery, you should set up transaction log backups to run on a regular basis. When you choose a transaction log backup from the Backup Type you’ll see that only those databases that are in Full Recovery will be listed: This makes it very easy to be sure you have a log backup set up for all the databases you should and none of the databases where you won’t be able to. There are other examples of guidance throughout the product. If you have the responsibility of managing backups but very little knowledge or time, we can help you out. Throughout the software you’ll notice little green question marks. You can see two in the screen above and more in each of the screens in other topics below this one. Clicking on these will open a window with additional information about the topic in question which should help to guide you through some of the tougher decisions you may have to make while setting up your backup jobs. Here’s an example: Backup Copies As a part of the wizard you can choose to make a copy of your backup on your network. This process runs as part of the Red Gate SQL Backup engine. It will copy your backup, after completing the backup so it doesn’t cause any additional blocking or resource use within the backup process, to the network location you define. Creating a copy acts as a mechanism of protection for your backups. You can then backup that copy or do other things with it, all without affecting the original backup file. This requires either an additional backup or additional scripting to get it done within the native Microsoft backup engine. Offsite Storage Red Gate offers you the ability to immediately copy your backup to the cloud as a further, off-site, protection of your backups. It’s a service we provide and expose through the Backup wizard. Your backup will complete first, just like with the network backup copy, then an asynchronous process will copy that backup to cloud storage. Again, this is built right into the wizard or even the command line calls to SQL Backup, so it’s part a single process within your system. With native backup you would need to write additional scripts, possibly outside of T-SQL, to make this happen. Before you can use this with your backups you’ll need to do a little setup, but it’s built right into the product to get this done. You’ll be directed to the web site for our hosted storage where you can set up an account. Compression If you have SQL Server 2008 Enterprise, or you’re on SQL Server 2008R2 or greater and you have a Standard or Enterprise license, then you have backup compression. It’s built right in and works well. But, if you need even more compression then you might want to consider Red Gate SQL Backup Pro. We offer four levels of compression within the product. This means you can get a little compression faster, or you can just sacrifice some CPU time and get even more compression. You decide. For just a simple example I backed up AdventureWorks2012 using both methods of compression. The resulting file from native was 53mb. Our file was 33mb. That’s a file that is smaller by 38%, not a small number when we start talking gigabytes. We even provide guidance here to help you determine which level of compression would be right for you and your system: So for this test, if you wanted maximum compression with minimum CPU use you’d probably want to go with Level 2 which gets you almost as much compression as Level 3 but will use fewer resources. And that compression is still better than the native one by 10%. Restore Testing Backups are vital. But, a backup is just a file until you restore it. How do you know that you can restore that backup? Of course, you’ll use CHECKSUM to validate that what was read from disk during the backup process is what gets written to the backup file. You’ll also use VERIFYONLY to check that the backup header and the checksums on the backup file are valid. But, this doesn’t do a complete test of the backup. The only complete test is a restore. So, what you really need is a process that tests your backups. This is something you’ll have to schedule separately from your backups, but we provide a couple of mechanisms to help you out here. First, when you create a backup schedule, all done through our wizard which gives you as much guidance as you get when running backups, you get the option of creating a reminder to create a job to test your restores. You can enable this or disable it as you choose when creating your scheduled backups. Once you’re ready to schedule test restores for your databases, we have a wizard for this as well. After you choose the databases and restores you want to test, all configurable for automation, you get to decide if you’re going to restore to a specified copy or to the original database: If you’re doing your tests on a new server (probably the best choice) you can just overwrite the original database if it’s there. If not, you may want to create a new database each time you test your restores. Another part of validating your backups is ensuring that they can pass consistency checks. So we have DBCC built right into the process. You can even decide how you want DBCC run, which error messages to include, limit or add to the checks being run. With this you could offload some DBCC checks from your production system so that you only run the physical checks on your production box, but run the full check on this backup. That makes backup testing not just a general safety process, but a performance enhancer as well: Finally, assuming the tests pass, you can delete the database, leave it in place, or delete it regardless of the tests passing. All this is automated and scheduled through the SQL Agent job on your servers. Running your databases through this process will ensure that you don’t just have backups, but that you have tested backups. Single Point of Management If you have more than one server to maintain, getting backups setup could be a tedious process. But, with Red Gate SQL Backup Pro you can connect to multiple servers and then manage all your databases and all your servers backups from a single location. You’ll be able to see what is scheduled, what has run successfully and what has failed, all from a single interface without having to connect to different servers. Log Shipping Wizard If you want to set up log shipping as part of a disaster recovery process, it can frequently be a pain to get configured correctly. We supply a wizard that will walk you through every step of the process including setting up alerts so you’ll know should your log shipping fail. Summary You want to get your backups right. As outlined above, Red Gate SQL Backup Pro will absolutely help you there. We supply a number of processes and functionalities above and beyond what you get with SQL Server native. Plus, with our guidance, hints and reminders, you will get your backups set up in a way that protects your business.

Read the article

CodePlex Daily Summary for Thursday, April 29, 2010

CodePlex Daily Summary for Thursday, April 29, 2010New ProjectsDesign Technology Laboratory: DTL project is prominent.Em-Lib: Electronic Music Library เป็นโปรแกรมที่พัฒนาขึ้นเพื่อให้เป็นห้องสมุดอิเล็กทรอนิกส์ โดยตัวโปรแกรมจะสามารถจำลองเครื่องดนตรี พร้อมข้อมูลที่เกี่ย...Extensions For ASP.NET: Extensions For ASP.NETFIM 2010 PowerShell Cmdlets: These PowerShell cmdlets let you manage objects in the Forefront Identity Manager 2010 web service easily and concisely. The five cmdlets let you e...Grunty OS: Grunty OS is a Free open source OS made my GruntXproductionsIrishDevelopers.net Test: IrishDevelopers.net TestJobping Url Shortener: MVC 2 project that Shortens urls Fully functioning 'bare bones' url shortening website. Just 1 page to create and display the short url. 'API' ...Made In Hell: Small console game. Just a training in code writings.manx: manx is a system for managing catalogs of technical documents. The system was created to handle the needs of the vintage computing community with ...ntn: playing around with new featuresOpen Bitrac: Bitrac is ASP.NET Blog SystemOpenNETCF.WindowsMobile.Ink: The Mobile Ink Library is a .NET component that provides support for the new Windows Mobile 6 WISP Lite API in your .NET Compact Framework applicat...Proxy Switch: Proxy switch is a program which allows the user to easily switch between a configured proxy server and a home network. The program is developed in ...Samcrypt: .Seoftware Evoluion Repository Mining: Project for mining data about develpoment effort from svn repository.SharePoint 2010 Bulk Document Importer: Need to import/migrate files and folders from servers and network shares into SharePoint 2010 document libraries? This free commandline application...SL2 - A Scala interpreter for L2: A simple L2 Interpreter. Just a project for a class.sMAPedit: -SocialCare: SocialCare - Team EUSOCIALSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: Unique in database comparison, SDF lets you compare live data--or saved snapshots--from any combination of SQL Server, Oracle, MySql, or ODBC data ...Yasminuroban: Yasminuroban is an open source "Sokoban" (aka "Warehouse Keeper" or "Boxes") alike game totally written in DHTML (JavaScript, CSS and HTML) that us...Хрень для ао: Test project to implement Bot.New ReleasesAntySpam Microsoft Outlook Plugin: AntySpam Microsoft Outlook 2010 Plugin v.2.0.1: this release only tested on MS Outlook 2010 version: 14.0.4536.1000 (32-bit and 64-bit) part of Microsoft Office Professional Plus 2010. Source pro...AppFabric Caching Admin Tool: AppFabric Caching Admin Tool 1.2: System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Refresh Test On:Win 7 (64x) Note: Must run as Administrator !!!AutoSPInstaller: Powershell script to pre-download prerequisites: This script will download all files required by Prerequisiteinstaller.exe in advance, in order to support an 'offline' installation of SharePoint 2...BeanProxy: BeanProxy 2.5: BeanProxy is a C# (.NET 3.5) library housing classes that facilitates unit testing. Any non-static, public interface/class/or abstract class can be...Bluetooth Radar: Verison 2.2.1: Please follow this link for the latest release - http://bluetoothradar.codeplex.com/releases/view/44232CSS 360 Planetary Calendar: LCA: Upload your LCA ppt pieces here. Then someone can merge them together.DeskNotes: DeskNotes 2.1.2: Version in development which features following improvements over DeskNotes 2.1.1: Each DeskNote can be made switchable between other windows on Wi...DotNetNuke Russian Language packs: Core Russian Language Pack for DNN 05.04.01: Core Russian Resource Language Pack for DNN 05.04.01 Русский языковый пакет для DNN 05.04.01DotNetNuke® Community Edition: 05.04.01: Major Highlights Fixed issue with assembly version type. Fixed issue with multiple cancel buttons on Add User screen. Fixed issue with ve...Event Scavenger: Version 3.2: Tweaked the import foreign logs functionality. Set version to 3.2 for Admin tool, service and database. Viewer unaffected.Event Scavenger: Version 3.2 stable: Update viewer version to 3.2 for consistency. Minor changes for rest.Event Scavenger: Version 3.2.2: Added setting to enable/disable creation of historic data.FIM 2010 PowerShell Cmdlets: Initial Release of FIM 2010 PowerShell Cmdlets: Initial release of FIM 2010 PowerShell cmdlets based on open source FIM web service client. Install by running installutil on Quest.FIMPowerhellSna...Fix.ly: Fix.ly 0.2: Fixed a bug where non-verbose mode would not workJobping Url Shortener: Deployment Code v0.1: Contains only the files necessary to run the Url Shortener website. Just provide a valid connection string in the web.configMetabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1: This is the release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1. If you want to get the s...Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1 (source): This is the source code release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1.MVC Music Store: MVC Music Store v0.8: This is the initial release of the MVC Music Store Tutorial. Download contains source and a tutorial document in PDF format.MyWSAT - ASP.NET Membership Administration Tool: MyWSAT v3.5.2: MyWSAT 3.5.2 Update Notes - April 28th 2010 1.) Fixed theme engine for administration area. Now I can create theme packages to make them available ...N2 CMS: 2.0 rc2: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes (1.5 -> 2.0 release candid...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.122: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version signi...nRoute Framework: nRoute.Toolkit Release Version 0.4.5: Release Targets, Silverlight and WPF: - Targets Silverlight 4 for Web - Targets WPF in .NET 4 for Desktop nRoute Dependencies: - System.Windows...NSIS Autorun: NSIS Autorun 0.1.4: NSIS Autorun 0.1.4 This release includes source code, application binary, and example materials.OpenNETCF.WindowsMobile.Ink: Initial Release: This is the source as originally hosted in the OpenNETCF SVN server.Resharper Settings Manager: RSM v2.1: Warning! The 'Load Settings File...' menu item won't show up in VS 2008. Will release an update soon. ChangesReworked plug-in options UI: Split RSM...RoTwee: RoTwee (11.1.0.0): Rotation is improved from 11.0.0.3.SharePoint 2010 Bulk Document Importer: SharePoint 2010 Bulk Document Importer 1.0.0.0: Features in 1.0.0.0 Command line interface Import folders and files with all subfolders Can be run from outside the SharePoint Server. Every a...sMAPedit: sMAPedit v0.6 (Base): + base version containing the applicaion & html resourcesSocialCare: SocialCare_src: Codigo Fonte da Aplicação e Banco de DadosTFS Code Comment Checking Policy (CCCP): CCCP 4.0 for VS2010: This release installs side-by-side with CCCP 3.0 for VS2008 SP1.VCC: Latest build, v2.1.30428.0: Automatic drop of latest buildVCC: Latest build, v2.1.30428.1: Automatic drop of latest buildVCC: Latest build, v2.1.30428.2: Automatic drop of latest buildХрень для ао: Первый релиз: Пробую что это такое.Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETiTuner - The iTunes CompanionMicrosoft SQL Server Community & SamplesMost Active Projectspatterns & practices – Enterprise LibraryRawrHydroServer - CUAHSI Hydrologic Information System ServerIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleParticle Plot PivotSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesN2 CMSBlogEngine.NET

Read the article

Node.js Adventure - Node.js on Windows

- by Shaun

Two weeks ago I had had a talk with Wang Tao, a C# MVP in China who is currently running his startup company and product named worktile. He asked me to figure out a synchronization solution which helps his product in the future. And he preferred me implementing the service in Node.js, since his worktile is written in Node.js. Even though I have some experience in ASP.NET MVC, HTML, CSS and JavaScript, I don’t think I’m an expert of JavaScript. In fact I’m very new to it. So it scared me a bit when he asked me to use Node.js. But after about one week investigate I have to say Node.js is very easy to learn, use and deploy, even if you have very limited JavaScript skill. And I think I became love Node.js. Hence I decided to have a series named “Node.js Adventure”, where I will demonstrate my story of learning and using Node.js in Windows and Windows Azure. And this is the first one. (Brief) Introduction of Node.js I don’t want to have a fully detailed introduction of Node.js. There are many resource on the internet we can find. But the best one is its homepage. Node.js was created by Ryan Dahl, sponsored by Joyent. It’s consist of about 80% C/C++ for core and 20% JavaScript for API. It utilizes CommonJS as the module system which we will explain later. The official definition of Node.js is Node.js is a platform built on Chrome's JavaScript runtime for easily building fast, scalable network applications. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient, perfect for data-intensive real-time applications that run across distributed devices. First of all, Node.js utilizes JavaScript as its development language and runs on top of V8 engine, which is being used by Chrome. It brings JavaScript, a client-side language into the backend service world. So many people said, even though not that actually, “Node.js is a server side JavaScript”. Additionally, Node.js uses an event-driven, non-blocking IO model. This means in Node.js there’s no way to block currently working thread. Every operation in Node.js executed asynchronously. This is a huge benefit especially if our code needs IO operations such as reading disks, connect to database, consuming web service, etc.. Unlike IIS or Apache, Node.js doesn’t utilize the multi-thread model. In Node.js there’s only one working thread serves all users requests and resources response, as the ST star in the figure below. And there is a POSIX async threads pool in Node.js which contains many async threads (AT stars) for IO operations. When a user have an IO request, the ST serves it but it will not do the IO operation. Instead the ST will go to the POSIX async threads pool to pick up an AT, pass this operation to it, and then back to serve any other requests. The AT will actually do the IO operation asynchronously. Assuming before the AT complete the IO operation there is another user comes. The ST will serve this new user request, pick up another AT from the POSIX and then back. If the previous AT finished the IO operation it will take the result back and wait for the ST to serve. ST will take the response and return the AT to POSIX, and then response to the user. And if the second AT finished its job, the ST will response back to the second user in the same way. As you can see, in Node.js there’s only one thread serve clients’ requests and POSIX results. This thread looping between the users and POSIX and pass the data back and forth. The async jobs will be handled by POSIX. This is the event-driven non-blocking IO model. The performance of is model is much better than the multi-threaded blocking model. For example, Apache is built in multi-threaded blocking model while Nginx is in event-driven non-blocking mode. Below is the performance comparison between them. And below is the memory usage comparison between them. These charts are captured from the video NodeJS Basics: An Introductory Training, which presented at Cloud Foundry Developer Advocate. Node.js on Windows To execute Node.js application on windows is very simple. First of you we need to download the latest Node.js platform from its website. After installed, it will register its folder into system path variant so that we can execute Node.js at anywhere. To confirm the Node.js installation, just open up a command windows and type “node”, then it will show the Node.js console. As you can see this is a JavaScript interactive console. We can type some simple JavaScript code and command here. To run a Node.js JavaScript application, just specify the source code file name as the argument of the “node” command. For example, let’s create a Node.js source code file named “helloworld.js”. Then copy a sample code from Node.js website. 1: var http = require("http"); 2: 3: http.createServer(function (req, res) { 4: res.writeHead(200, {"Content-Type": "text/plain"}); 5: res.end("Hello World\n"); 6: }).listen(1337, "127.0.0.1"); 7: 8: console.log("Server running at http://127.0.0.1:1337/"); This code will create a web server, listening on 1337 port and return “Hello World” when any requests come. Run it in the command windows. Then open a browser and navigate to http://localhost:1337/. As you can see, when using Node.js we are not creating a web application. In fact we are likely creating a web server. We need to deal with request, response and the related headers, status code, etc.. And this is one of the benefit of using Node.js, lightweight and straightforward. But creating a website from scratch again and again is not acceptable. The good news is that, Node.js utilizes CommonJS as its module system, so that we can leverage some modules to simplify our job. And furthermore, there are about ten thousand of modules available n the internet, which covers almost all areas in server side application development. NPM and Node.js Modules Node.js utilizes CommonJS as its module system. A module is a set of JavaScript files. In Node.js if we have an entry file named “index.js”, then all modules it needs will be located at the “node_modules” folder. And in the “index.js” we can import modules by specifying the module name. For example, in the code we’ve just created, we imported a module named “http”, which is a build-in module installed alone with Node.js. So that we can use the code in this “http” module. Besides the build-in modules there are many modules available at the NPM website. Thousands of developers are contributing and downloading modules at this website. Hence this is another benefit of using Node.js. There are many modules we can use, and the numbers of modules increased very fast, and also we can publish our modules to the community. When I wrote this post, there are totally 14,608 modules at NPN and about 10 thousand downloads per day. Install a module is very simple. Let’s back to our command windows and input the command “npm install express”. This command will install a module named “express”, which is a MVC framework on top of Node.js. And let’s create another JavaScript file named “helloweb.js” and copy the code below in it. I imported the “express” module. And then when the user browse the home page it will response a text. If the incoming URL matches “/Echo/:value” which the “value” is what the user specified, it will pass it back with the current date time in JSON format. And finally my website was listening at 12345 port. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: app.get("/Echo/:value", function(req, res) { 9: var value = req.params.value; 10: res.json({ 11: "Value" : value, 12: "Time" : new Date() 13: }); 14: }); 15: 16: console.log("Web application opened."); 17: app.listen(12345); For more information and API about the “express”, please have a look here. Start our application from the command window by command “node helloweb.js”, and then navigate to the home page we can see the response in the browser. And if we go to, for example http://localhost:12345/Echo/Hello Shaun, we can see the JSON result. The “express” module is very populate in NPM. It makes the job simple when we need to build a MVC website. There are many modules very useful in NPM. - underscore: A utility module covers many common functionalities such as for each, map, reduce, select, etc.. - request: A very simple HTT request client. - async: Library for coordinate async operations. - wind: Library which enable us to control flow with plain JavaScript for asynchronous programming (and more) without additional pre-compiling steps. Node.js and IIS I demonstrated how to run the Node.js application from console. Since we are in Windows another common requirement would be, “can I host Node.js in IIS?” The answer is “Yes”. Tomasz Janczuk created a project IISNode at his GitHub space we can find here. And Scott Hanselman had published a blog post introduced about it. Summary In this post I provided a very brief introduction of Node.js, includes it official definition, architecture and how it implement the event-driven non-blocking model. And then I described how to install and run a Node.js application on windows console. I also described the Node.js module system and NPM command. At the end I referred some links about IISNode, an IIS extension that allows Node.js application runs on IIS. Node.js became a very popular server side application platform especially in this year. By leveraging its non-blocking IO model and async feature it’s very useful for us to build a highly scalable, asynchronously service. I think Node.js will be used widely in the cloud application development in the near future. In the next post I will explain how to use SQL Server from Node.js. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Silverlight Recruiting Application Part 6 - Adding an Interview Scheduling Module/View

Between the last post and this one I went ahead and carried the ideas for the Jobs module and view into the Applicants module and view- they're both doing more or less the same thing, except with different objects being at their core. Made for an easy cut-and-paste operation with a few items being switched from one to another. Now that we have the ability to add postings and applicants, wouldn't it be nice if we could schedule an interview? Of course it would! Scheduling Module I think you get the drift from previous posts that these project structures start looking somewhat similar. The interview scheduling module is no different than the rest- it gets a SchedulingModule.cs file at the root that inherits from IModule, and there is a single SchedulerView.xsml and SchedulerViewModel.cs setup for our V+VM. We have one unique concern as we enter into this- RadScheduler deals with AppointmentsSource, not ItemsSource, so there are some special considerations to take into account when planning this module. First, I need something which inherits from AppointmentBase. This is the core of the RadScheduler appointment, and if you are planning to do any form of custom appointment, you'll want it to inherit from this. Then you can add-on functionality as needed. Here is my addition to the mix, the InterviewAppointment: 01.public class InterviewAppointment : AppointmentBase 02.{ 03. private int _applicantID; 04. public int ApplicantID 05. { 06. get { return this._applicantID; } 07. set 08. { 09. if (_applicantID != value) 10. { 11. _applicantID = value; 12. OnPropertyChanged("ApplicantID"); 13. } 14. } 15. } 16. 17. private int _postingID; 18. public int PostingID 19. { 20. get { return _postingID; } 21. set 22. { 23. if (_postingID != value) 24. { 25. _postingID = value; 26. OnPropertyChanged("PostingID"); 27. } 28. } 29. } 30. 31. private string _body; 32. public string Body 33. { 34. get { return _body; } 35. set 36. { 37. if (_body != value) 38. { 39. _body = value; 40. OnPropertyChanged("Body"); 41. } 42. } 43. } 44. 45. private int _interviewID; 46. public int InterviewID 47. { 48. get { return _interviewID; } 49. set 50. { 51. if (_interviewID != value) 52. { 53. _interviewID = value; 54. OnPropertyChanged("InterviewID"); 55. } 56. } 57. } 58. 59. public override IAppointment Copy() 60. { 61. IAppointment appointment = new InterviewAppointment(); 62. appointment.CopyFrom(this); 63. return appointment; 64. } 65. 66. public override void CopyFrom(IAppointment other) 67. { 68. base.CopyFrom(other); 69. var appointment = other as InterviewAppointment; 70. if (appointment != null) 71. { 72. ApplicantID = appointment.ApplicantID; 73. PostingID = appointment.PostingID; 74. Body = appointment.Body; 75. InterviewID = appointment.InterviewID; 76. } 77. } 78.} Nothing too exciting going on here, we just make sure that our custom fields are persisted (specifically set in CopyFrom at the bottom) and notifications are fired- otherwise this ends up exactly like the standard appointment as far as interactions, etc. But if we've got custom appointment items... that also means we need to customize what our appointment dialog window will look like. Customizing the Edit Appointment Dialog This initially sounds a lot more intimidating than it really is. The first step here depends on what you're dealing with for theming, but for ease of everything I went ahead and extracted my templates in Blend for RadScheduler so I could modify it as I pleased. For the faint of heart, the RadScheduler template is a few thousand lines of goodness since there are some very complex things going on in that control. I've gone ahead and trimmed down the template parts I don't need as much as possible, so what is left is all that is relevant to the Edit Appointment Dialog. Here's the resulting Xaml, with line numbers, so I can explain further: 001.<UserControl.Resources> 002.  003. <helpers:DataContextProxy x:Key="DataContextProxy" /> 004. 005. <telerik:Windows7Theme x:Key="Theme" /> 006. <SolidColorBrush x:Key="DialogWindowBackground" 007. Color="White" /> 008. <SolidColorBrush x:Key="CategorySelectorBorderBrush" 009. Color="#FFB1B1B1" /> 010. <LinearGradientBrush x:Key="RadToolBar_InnerBackground" 011. EndPoint="0.5,1" 012. StartPoint="0.5,0"> 013. <GradientStop Color="#FFFDFEFF" 014. Offset="0" /> 015. <GradientStop Color="#FFDDE9F7" 016. Offset="1" /> 017. <GradientStop Color="#FFE6F0FA" 018. Offset="0.5" /> 019. <GradientStop Color="#FFDCE6F4" 020. Offset="0.5" /> 021. </LinearGradientBrush> 022. <Style x:Key="FormElementTextBlockStyle" 023. TargetType="TextBlock"> 024. <Setter Property="HorizontalAlignment" 025. Value="Right" /> 026. <Setter Property="VerticalAlignment" 027. Value="Top" /> 028. <Setter Property="Margin" 029. Value="15, 15, 0, 2" /> 030. </Style> 031. <Style x:Key="FormElementStyle" 032. TargetType="FrameworkElement"> 033. <Setter Property="Margin" 034. Value="10, 10, 0, 2" /> 035. </Style> 036. <SolidColorBrush x:Key="GenericShallowBorderBrush" 037. Color="#FF979994" /> 038. <telerik:BooleanToVisibilityConverter x:Key="BooleanToVisibilityConverter" /> 039. <telerikScheduler:ImportanceToBooleanConverter x:Key="ImportanceToBooleanConverter" /> 040. <telerikScheduler:NullToVisibilityConverter x:Key="NullToVisibilityConverter" /> 041. <telerikScheduler:InvertedNullToVisibilityConverter x:Key="InvertedNullToVisibilityConverter" /> 042. <scheduler:ResourcesSeparatorConverter x:Key="ResourcesSeparatorConverter" /> 043. <DataTemplate x:Key="IconDataEditTemplate"> 044. <Image Source="/Telerik.Windows.Controls.Scheduler;component/Themes/Office/Images/cal.png" 045. Margin="3,3,0,0" 046. Width="16" 047. Height="16" /> 048. </DataTemplate> 049. <DataTemplate x:Key="SingleSelectionTemplate"> 050. <Grid VerticalAlignment="Stretch" 051. HorizontalAlignment="Stretch"> 052. <Grid.RowDefinitions> 053. <RowDefinition Height="Auto" /> 054. </Grid.RowDefinitions> 055. <Grid.ColumnDefinitions> 056. <ColumnDefinition Width="Auto" 057. MinWidth="84" /> 058. <ColumnDefinition Width="Auto" 059. MinWidth="200" /> 060. </Grid.ColumnDefinitions> 061. <TextBlock x:Name="SelectionNameLabel" 062. Margin="0,13,4,2" 063. Text="{Binding ResourceType.DisplayName}" 064. Style="{StaticResource FormElementTextBlockStyle}" 065. Grid.Column="0" /> 066. <telerikInput:RadComboBox ItemsSource="{Binding ResourceItems}" 067. Width="185" 068. Margin="5,10,20,2" 069. HorizontalAlignment="Left" 070. Grid.Column="1" 071. ClearSelectionButtonVisibility="Visible" 072. ClearSelectionButtonContent="Clear All" 073. DisplayMemberPath="Resource.DisplayName" 074. telerik:StyleManager.Theme="{StaticResource Theme}" 075. SelectedItem="{Binding SelectedItem, Mode=TwoWay}" /> 076. </Grid> 077. </DataTemplate> 078. <DataTemplate x:Key="MultipleSelectionTemplate"> 079. <Grid VerticalAlignment="Stretch" 080. HorizontalAlignment="Stretch"> 081. <Grid.RowDefinitions> 082. <RowDefinition Height="Auto" /> 083. </Grid.RowDefinitions> 084. <Grid.ColumnDefinitions> 085. <ColumnDefinition Width="Auto" 086. MinWidth="84" /> 087. <ColumnDefinition Width="Auto" 088. MinWidth="200" /> 089. </Grid.ColumnDefinitions> 090. <TextBlock x:Name="SelectionNameLabel" 091. Grid.Column="0" 092. Text="{Binding ResourceType.DisplayName}" 093. Margin="0,13,4,2" 094. Style="{StaticResource FormElementTextBlockStyle}" /> 095. <telerikInput:RadComboBox Grid.Column="1" 096. Width="185" 097. HorizontalAlignment="Left" 098. Margin="5,10,20,2" 099. ItemsSource="{Binding ResourceItems}" 100. SelectedIndex="{Binding SelectedIndex, Mode=TwoWay}" 101. ClearSelectionButtonVisibility="Visible" 102. ClearSelectionButtonContent="Clear All" 103. telerik:StyleManager.Theme="{StaticResource Theme}"> 104. <telerikInput:RadComboBox.ItemTemplate> 105. <DataTemplate> 106. <Grid HorizontalAlignment="Stretch" 107. VerticalAlignment="Stretch"> 108. <CheckBox VerticalAlignment="Center" 109. HorizontalContentAlignment="Stretch" 110. VerticalContentAlignment="Center" 111. IsChecked="{Binding IsChecked, Mode=TwoWay}" 112. Content="{Binding Resource.DisplayName}"> 113. <CheckBox.ContentTemplate> 114. <DataTemplate> 115. <TextBlock HorizontalAlignment="Stretch" 116. VerticalAlignment="Stretch" 117. Text="{Binding Content, RelativeSource={RelativeSource TemplatedParent}}" /> 118. </DataTemplate> 119. </CheckBox.ContentTemplate> 120. </CheckBox> 121. </Grid> 122. </DataTemplate> 123. </telerikInput:RadComboBox.ItemTemplate> 124. </telerikInput:RadComboBox> 125. </Grid> 126. </DataTemplate> 127. <scheduler:ResourceTypeTemplateSelector x:Key="ItemTemplateSelector" 128. MultipleSelectionTemplate="{StaticResource MultipleSelectionTemplate}" 129. SingleSelectionTemplate="{StaticResource SingleSelectionTemplate}" /> 130.  131. 132. <ControlTemplate x:Key="EditAppointmentTemplate" 133. TargetType="telerikScheduler:AppointmentDialogWindow"> 134. <StackPanel Background="{TemplateBinding Background}" 135. UseLayoutRounding="True"> 136. <StackPanel Grid.Row="0" 137. Orientation="Horizontal" 138. Background="{StaticResource RadToolBar_InnerBackground}" 139. Grid.ColumnSpan="2" 140. Height="0"> 141.  142. <Border Margin="1,1,0,0" 143. Background="#50000000" 144. HorizontalAlignment="Left" 145. VerticalAlignment="Center" 146. Width="2" 147. Height="16"> 148. <Border Margin="0,0,1,1" 149. Background="#80FFFFFF" 150. HorizontalAlignment="Left" 151. Width="1" /> 152. </Border> 153. <Border Margin="1,1,0,0" 154. Background="#50000000" 155. HorizontalAlignment="Left" 156. VerticalAlignment="Center" 157. Width="2" 158. Height="16"> 159. <Border Margin="0,0,1,1" 160. Background="#80FFFFFF" 161. HorizontalAlignment="Left" 162. Width="1" /> 163. </Border> 164. <TextBlock telerik:LocalizationManager.ResourceKey="ShowAs" 165. VerticalAlignment="Center" 166. Margin="5,0,0,0" /> 167. <telerikInput:RadComboBox ItemsSource="{TemplateBinding TimeMarkers}" 168. Width="100" 169. Height="20" 170. VerticalAlignment="Center" 171. Margin="5,0,0,0" 172. ClearSelectionButtonVisibility="Visible" 173. ClearSelectionButtonContent="Clear" 174. SelectedItem="{Binding TimeMarker,RelativeSource={RelativeSource TemplatedParent},Mode=TwoWay}" 175. telerik:StyleManager.Theme="{StaticResource Theme}"> 176. <telerikInput:RadComboBox.ItemTemplate> 177. <DataTemplate> 178. <StackPanel Orientation="Horizontal"> 179. <Rectangle Fill="{Binding TimeMarkerBrush}" 180. Margin="2" 181. Width="12" 182. Height="12" /> 183. <TextBlock Text="{Binding TimeMarkerName}" 184. Margin="2" /> 185. </StackPanel> 186. </DataTemplate> 187. </telerikInput:RadComboBox.ItemTemplate> 188. </telerikInput:RadComboBox> 189. <telerik:RadToggleButton x:Name="High" 190. BorderThickness="0" 191. Background="{StaticResource RadToolBar_InnerBackground}" 192. DataContext="{TemplateBinding EditedAppointment}" 193. telerik:StyleManager.Theme="{StaticResource Theme}" 194. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=High}" 195. Margin="2,2,0,2" 196. Width="23" 197. Height="23" 198. HorizontalContentAlignment="Center" 199. ToolTipService.ToolTip="High importance" 200. CommandParameter="High" 201. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 202. <StackPanel HorizontalAlignment="Center"> 203. <Path Stretch="Fill" 204. Height="10" 205. HorizontalAlignment="Center" 206. VerticalAlignment="Top" 207. Width="5.451" 208. Data="M200.39647,58.840393 C200.39337,58.336426 201.14566,57.683922 202.56244,57.684292 C204.06589,57.684685 204.73764,58.357765 204.72783,58.992363 C205.04649,61.795574 203.04713,64.181099 202.47388,66.133446 C201.93753,64.154961 199.9471,61.560352 200.39647,58.840393 z"> 209. <Path.Fill> 210. <LinearGradientBrush EndPoint="1.059,0.375" 211. StartPoint="-0.457,0.519"> 212. <GradientStop Color="#FFFF0606" 213. Offset="0.609" /> 214. <GradientStop Color="#FFBF0303" 215. Offset="0.927" /> 216. </LinearGradientBrush> 217. </Path.Fill> 218. </Path> 219. <Ellipse Height="3" 220. HorizontalAlignment="Center" 221. Margin="0,-1,0,0" 222. VerticalAlignment="Top" 223. Width="3"> 224. <Ellipse.Fill> 225. <RadialGradientBrush> 226. <GradientStop Color="#FFFF0606" 227. Offset="0" /> 228. <GradientStop Color="#FFBF0303" 229. Offset="1" /> 230. </RadialGradientBrush> 231. </Ellipse.Fill> 232. </Ellipse> 233. </StackPanel> 234. </telerik:RadToggleButton> 235. <telerik:RadToggleButton x:Name="Low" 236. HorizontalContentAlignment="Center" 237. BorderThickness="0" 238. Background="{StaticResource RadToolBar_InnerBackground}" 239. DataContext="{TemplateBinding EditedAppointment}" 240. IsChecked="{Binding Importance,Mode=TwoWay, Converter={StaticResource ImportanceToBooleanConverter},ConverterParameter=Low}" 241. Margin="0,2,0,2" 242. Width="23" 243. Height="23" 244. ToolTipService.ToolTip="Low importance" 245. CommandParameter="Low" 246. telerik:StyleManager.Theme="{StaticResource Theme}" 247. Command="telerikScheduler:RadSchedulerCommands.SetAppointmentImportance"> 248. <Path Stretch="Fill" 249. Height="12" 250. HorizontalAlignment="Center" 251. VerticalAlignment="Top" 252. Width="9" 253. Data="M222.40353,60.139881 L226.65768,60.139843 L226.63687,67.240196 L229.15347,67.240196 L224.37816,71.394943 L219.65274,67.240196 L222.37572,67.219345 z" 254. Stroke="#FF0365A7"> 255. <Path.Fill> 256. <LinearGradientBrush EndPoint="1.059,0.375" 257. StartPoint="-0.457,0.519"> 258. <GradientStop Color="#FFBBE4FF" /> 259. <GradientStop Color="#FF024572" 260. Offset="0.836" /> 261. <GradientStop Color="#FF43ADF4" 262. Offset="0.466" /> 263. </LinearGradientBrush> 264. </Path.Fill> 265. </Path> 266. </telerik:RadToggleButton> 267. </StackPanel > 268. <Border DataContext="{TemplateBinding EditedAppointment}" 269. Background="{Binding Category.CategoryBrush}" 270. Visibility="{Binding Category,Converter={StaticResource NullToVisibilityConverter}}" 271. CornerRadius="3" 272. Height="20" 273. Margin="5,10,5,0"> 274. <TextBlock Text="{Binding Category.DisplayName}" 275. VerticalAlignment="Center" 276. Margin="5,0,0,0" /> 277. </Border> 278. <Grid VerticalAlignment="Stretch" 279. HorizontalAlignment="Stretch" 280. DataContext="{TemplateBinding EditedAppointment}" 281. Background="{TemplateBinding Background}"> 282. <Grid.RowDefinitions> 283. <RowDefinition Height="Auto" /> 284. <RowDefinition Height="Auto" /> 285. <RowDefinition Height="Auto" /> 286. <RowDefinition Height="Auto" /> 287. <RowDefinition Height="Auto" /> 288. <RowDefinition Height="Auto" /> 289. <RowDefinition Height="Auto" /> 290. <RowDefinition Height="Auto" /> 291. <RowDefinition Height="Auto" /> 292. <RowDefinition Height="Auto" /> 293. </Grid.RowDefinitions> 294. <Grid.ColumnDefinitions> 295. <ColumnDefinition Width="Auto" 296. MinWidth="100" /> 297. <ColumnDefinition Width="Auto" 298. MinWidth="200" /> 299. </Grid.ColumnDefinitions> 300.  301. <TextBlock x:Name="SubjectLabel" 302. Grid.Row="0" 303. Grid.Column="0" 304. Margin="0,15,0,2" 305. telerik:LocalizationManager.ResourceKey="Subject" 306. Style="{StaticResource FormElementTextBlockStyle}" /> 307. <TextBox x:Name="Subject" 308. Grid.Row="0" 309. Grid.Column="1" 310. MinHeight="22" 311. Padding="4 2" 312. Width="340" 313. HorizontalAlignment="Left" 314. Text="{Binding Subject, Mode=TwoWay}" 315. MaxLength="255" 316. telerik:StyleManager.Theme="{StaticResource Theme}" 317. Margin="10,12,20,2" /> 318.  319. <TextBlock x:Name="DescriptionLabel" 320. Grid.Row="1" 321. Grid.Column="0" 322. Margin="0,13,0,2" 323. telerik:LocalizationManager.ResourceKey="Body" 324. Style="{StaticResource FormElementTextBlockStyle}" /> 325. <TextBox x:Name="Body" 326. VerticalAlignment="top" 327. Grid.Row="1" 328. Grid.Column="1" 329. Height="Auto" 330. MaxHeight="82" 331. Width="340" 332. HorizontalAlignment="Left" 333. MinHeight="22" 334. Padding="4 2" 335. TextWrapping="Wrap" 336. telerik:StyleManager.Theme="{StaticResource Theme}" 337. Text="{Binding Body, Mode=TwoWay}" 338. AcceptsReturn="true" 339. Margin="10,10,20,2" 340. HorizontalScrollBarVisibility="Auto" 341. VerticalScrollBarVisibility="Auto" /> 342.  343. <TextBlock x:Name="StartDateLabel" 344. Grid.Row="2" 345. Grid.Column="0" 346. Margin="0,13,0,2" 347. telerik:LocalizationManager.ResourceKey="StartTime" 348. Style="{StaticResource FormElementTextBlockStyle}" /> 349. <telerikScheduler:DateTimePicker x:Name="StartDateTime" 350. Height="22" 351. Grid.Row="2" 352. Grid.Column="1" 353. HorizontalAlignment="Left" 354. Margin="10,10,20,2" 355. Style="{StaticResource FormElementStyle}" 356. SelectedDateTime="{Binding Start, Mode=TwoWay}" 357. telerikScheduler:StartEndDatePicker.EndPicker="{Binding ElementName=EndDateTime}" 358. IsTabStop="False" 359. IsEnabled="False" /> 360. <TextBlock x:Name="EndDateLabel" 361. Grid.Row="3" 362. Grid.Column="0" 363. Margin="0,13,0,2" 364. telerik:LocalizationManager.ResourceKey="EndTime" 365. Style="{StaticResource FormElementTextBlockStyle}" /> 366. <telerikScheduler:DateTimePicker x:Name="EndDateTime" 367. Height="22" 368. Grid.Row="3" 369. Grid.Column="1" 370. HorizontalAlignment="Left" 371. Margin="10,10,20,2" 372. Style="{StaticResource FormElementStyle}" 373. IsTabStop="False" 374. IsEnabled="False" 375. SelectedDateTime="{Binding End, Mode=TwoWay}" /> 376.  377. <CheckBox x:Name="AllDayEventCheckbox" 378. IsChecked="{Binding IsAllDayEvent, Mode=TwoWay}" 379. Grid.Row="4" 380. Grid.Column="1" 381. Margin="10,10,20,2" 382. HorizontalAlignment="Left" 383. telerik:StyleManager.Theme="{StaticResource Theme}" 384. telerik:LocalizationManager.ResourceKey="AllDayEvent"> 385. <telerik:CommandManager.InputBindings> 386. <telerik:InputBindingCollection> 387. <telerik:MouseBinding Command="telerikScheduler:RadSchedulerCommands.ChangeTimePickersVisibility" 388. Gesture="LeftClick" /> 389. </telerik:InputBindingCollection> 390. </telerik:CommandManager.InputBindings> 391. </CheckBox> 392. <Grid Grid.Row="5" 393. Grid.ColumnSpan="2"> 394. <Grid.ColumnDefinitions> 395. <ColumnDefinition Width="Auto" 396. MinWidth="100" /> 397. <ColumnDefinition Width="Auto" 398. MinWidth="200" /> 399. </Grid.ColumnDefinitions> 400. <Grid.RowDefinitions> 401. <RowDefinition Height="Auto" /> 402. <RowDefinition Height="Auto" /> 403. </Grid.RowDefinitions> 404. <TextBlock Text="Applicant" 405. Margin="0,13,0,2" 406. Style="{StaticResource FormElementTextBlockStyle}" /> 407. <telerikInput:RadComboBox IsEditable="False" 408. Grid.Column="1" 409. Height="24" 410. VerticalAlignment="Center" 411. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.ApplicantList}" 412. SelectedValue="{Binding ApplicantID, Mode=TwoWay}" 413. SelectedValuePath="ApplicantID" 414. DisplayMemberPath="FirstName" /> 415. 416. <TextBlock Text="Job" 417. Margin="0,13,0,2" 418. Grid.Row="1" 419. Style="{StaticResource FormElementTextBlockStyle}" /> 420. <telerikInput:RadComboBox IsEditable="False" 421. Grid.Column="1" 422. Grid.Row="1" 423. Height="24" 424. VerticalAlignment="Center" 425. ItemsSource="{Binding Source={StaticResource DataContextProxy}, Path=DataSource.JobsList}" 426. SelectedValue="{Binding PostingID, Mode=TwoWay}" 427. SelectedValuePath="PostingID" 428. DisplayMemberPath="JobTitle"/> 429. </Grid> 430.  431. <Grid x:Name="ResourcesLayout" 432. Grid.Row="7" 433. Grid.Column="0" 434. Grid.ColumnSpan="2" 435. MaxHeight="130" 436. Margin="20,5,20,0"> 437. <Border Margin="0" 438. BorderThickness="1" 439. BorderBrush="{StaticResource GenericShallowBorderBrush}" 440. Visibility="{Binding ElementName=ResourcesScrollViewer, Path=ComputedVerticalScrollBarVisibility}"></Border> 441. <ScrollViewer x:Name="ResourcesScrollViewer" 442. IsTabStop="false" 443. Grid.Row="6" 444. Grid.Column="0" 445. Grid.ColumnSpan="2" 446. Margin="1" 447. telerik:StyleManager.Theme="{StaticResource Theme}" 448. VerticalScrollBarVisibility="Auto"> 449. <scheduler:ResourcesItemsControl x:Name="PART_Resources" 450. HorizontalAlignment="Left" 451. Padding="0,2,0,5" 452. IsTabStop="false" 453. ItemsSource="{TemplateBinding ResourceTypeModels}" 454. ItemTemplateSelector="{StaticResource ItemTemplateSelector}" /> 455. </ScrollViewer> 456. </Grid> 457. <StackPanel x:Name="FooterControls" 458. Margin="5 10 10 10" 459. Grid.Row="8" 460. Grid.Column="1" 461. HorizontalAlignment="Left" 462. Orientation="Horizontal"> 463. <telerik:RadButton x:Name="OKButton" 464. Margin="5" 465. Padding="10 0" 466. MinWidth="80" 467. Command="telerikScheduler:RadSchedulerCommands.SaveAppointment" 468. telerik:StyleManager.Theme="{StaticResource Theme}" 469. telerikNavigation:RadWindow.ResponseButton="Accept" 470. telerik:LocalizationManager.ResourceKey="SaveAndCloseCommandText"> 471. </telerik:RadButton> 472. <telerik:RadButton x:Name="CancelButton" 473. Margin="5" 474. Padding="10 0" 475. MinWidth="80" 476. telerik:LocalizationManager.ResourceKey="Cancel" 477. telerik:StyleManager.Theme="{StaticResource Theme}" 478. telerikNavigation:RadWindow.ResponseButton="Cancel" 479. Command="telerik:WindowCommands.Close"> 480. </telerik:RadButton> 481. </StackPanel> 482. </Grid> 483. <vsm:VisualStateManager.VisualStateGroups> 484. <vsm:VisualStateGroup x:Name="RecurrenceRuleState"> 485. <vsm:VisualState x:Name="RecurrenceRuleIsNull"> 486. <Storyboard> 487. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 488. Storyboard.TargetProperty="IsEnabled" 489. Duration="0"> 490. <DiscreteObjectKeyFrame KeyTime="0" 491. Value="True" /> 492. </ObjectAnimationUsingKeyFrames> 493. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 494. Storyboard.TargetProperty="IsEnabled" 495. Duration="0"> 496. <DiscreteObjectKeyFrame KeyTime="0" 497. Value="True" /> 498. </ObjectAnimationUsingKeyFrames> 499. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 500. Storyboard.TargetProperty="IsEnabled" 501. Duration="0"> 502. <DiscreteObjectKeyFrame KeyTime="0" 503. Value="True" /> 504. </ObjectAnimationUsingKeyFrames> 505. </Storyboard> 506. </vsm:VisualState> 507. <vsm:VisualState x:Name="RecurrenceRuleIsNotNull"> 508. <Storyboard> 509. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="StartDateTime" 510. Storyboard.TargetProperty="IsEnabled" 511. Duration="0"> 512. <DiscreteObjectKeyFrame KeyTime="0" 513. Value="False" /> 514. </ObjectAnimationUsingKeyFrames> 515. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="EndDateTime" 516. Storyboard.TargetProperty="IsEnabled" 517. Duration="0"> 518. <DiscreteObjectKeyFrame KeyTime="0" 519. Value="False" /> 520. </ObjectAnimationUsingKeyFrames> 521. <ObjectAnimationUsingKeyFrames Storyboard.TargetName="AllDayEventCheckbox" 522. Storyboard.TargetProperty="IsEnabled" 523. Duration="0"> 524. <DiscreteObjectKeyFrame KeyTime="0" 525. Value="False" /> 526. </ObjectAnimationUsingKeyFrames> 527. </Storyboard> 528. </vsm:VisualState> 529. </vsm:VisualStateGroup> 530. </vsm:VisualStateManager.VisualStateGroups> 531. </StackPanel> 532. </ControlTemplate> 533. <DataTemplate x:Key="AppointmentDialogWindowHeaderDataTemplate"> 534. <StackPanel Orientation="Horizontal" 535. MaxWidth="400"> 536. <TextBlock telerik:LocalizationManager.ResourceKey="Event" 537. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource BooleanToVisibilityConverter}}" /> 538. <TextBlock telerik:LocalizationManager.ResourceKey="Appointment" 539. Visibility="{Binding Appointment.IsAllDayEvent, Converter={StaticResource InvertedBooleanToVisibilityConverter}}" /> 540. <TextBlock Text=" - " /> 541. <TextBlock x:Name="SubjectTextBlock" 542. Visibility="{Binding Appointment.Subject, Converter={StaticResource NullToVisibilityConverter}}" 543. Text="{Binding Appointment.Subject}" /> 544. <TextBlock telerik:LocalizationManager.ResourceKey="Untitled" 545. Visibility="{Binding Appointment.Subject, Converter={StaticResource InvertedNullToVisibilityConverter}}" /> 546. </StackPanel> 547. </DataTemplate> 548. <Style x:Key="EditAppointmentStyle" 549. TargetType="telerikScheduler:AppointmentDialogWindow"> 550. <Setter Property="IconTemplate" 551. Value="{StaticResource IconDataEditTemplate}" /> 552. <Setter Property="HeaderTemplate" 553. Value="{StaticResource AppointmentDialogWindowHeaderDataTemplate}" /> 554. <Setter Property="Background" 555. Value="{StaticResource DialogWindowBackground}" /> 556. <Setter Property="Template" 557. Value="{StaticResource EditAppointmentTemplate}" /> 558. </Style> 559.</UserControl.Resources> The first line there is the DataContextProxy I mentioned previously- we use that again to work a bit of magic in this template. Where we start getting into the dialog in question is line 132, but line 407 is where things start getting interesting. The ItemsSource is pointing at a list that exists in my ViewModel (or code-behind, if it is used as a DataContext), the SelectedValue is the item I am actually binding from the applicant (note the TwoWay binding), and SelectedValuePath and DisplayMemberPath ensure the proper applicant is being displayed from the collection. You will also see similar starting on line 420 where I do the same for the Jobs we'll be displaying. Just to wrap-up the Xaml, here's the RadScheduler declaraction that ties this all together and will be the main focus of our view: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. AppointmentsSource="{Binding Interviews}" 09. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 10. command:AppointmentAddedEventClass.Command="{Binding AddAppointmentCommand}" 11. command:ApptCreatedEventClass.Command="{Binding ApptCreatingCommand}" 12. command:ApptEditedEventClass.Command="{Binding ApptEditedCommand}" 13. command:ApptDeletedEventClass.Command="{Binding ApptDeletedCommand}"> 14.</telerikScheduler:RadScheduler> Now, we get to the ViewModel and what it takes to get that rigged up. And for those of you who remember the jobs post, those command:s in the Xaml are pointing to attached behavior commands that reproduce the respective events. This becomes very handy when we're setting up the code-behind version. ;) ViewModel I've been liking this approach so far, so I'm going to put the entire ViewModel here and then go into the lines of interest. Of course, feel free to ask me questions about anything that isn't clear (by line number, ideally) so I can help out if I have missed anything important: 001.public class SchedulerViewModel : ViewModelBase 002.{ 003. private readonly IEventAggregator eventAggregator; 004. private readonly IRegionManager regionManager; 005. 006. public RecruitingContext context; 007. 008. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 009. public ObservableItemCollection<InterviewAppointment> Interviews 010. { 011. get { return _interviews; } 012. set 013. { 014. if (_interviews != value) 015. { 016. _interviews = value; 017. NotifyChanged("Interviews"); 018. } 019. } 020. } 021. 022. private QueryableCollectionView _jobsList; 023. public QueryableCollectionView JobsList 024. { 025. get { return this._jobsList; } 026. set 027. { 028. if (this._jobsList != value) 029. { 030. this._jobsList = value; 031. this.NotifyChanged("JobsList"); 032. } 033. } 034. } 035. 036. private QueryableCollectionView _applicantList; 037. public QueryableCollectionView ApplicantList 038. { 039. get { return _applicantList; } 040. set 041. { 042. if (_applicantList != value) 043. { 044. _applicantList = value; 045. NotifyChanged("ApplicantList"); 046. } 047. } 048. } 049. 050. public DelegateCommand<object> AddAppointmentCommand { get; set; } 051. public DelegateCommand<object> ApptCreatingCommand { get; set; } 052. public DelegateCommand<object> ApptEditedCommand { get; set; } 053. public DelegateCommand<object> ApptDeletedCommand { get; set; } 054. 055. public SchedulerViewModel(IEventAggregator eventAgg, IRegionManager regionmanager) 056. { 057. // set Unity items 058. this.eventAggregator = eventAgg; 059. this.regionManager = regionmanager; 060. 061. // load our context 062. context = new RecruitingContext(); 063. LoadOperation<Interview> loadOp = context.Load(context.GetInterviewsQuery()); 064. loadOp.Completed += new EventHandler(loadOp_Completed); 065. 066. this._jobsList = new QueryableCollectionView(context.JobPostings); 067. context.Load(context.GetJobPostingsQuery()); 068. 069. this._applicantList = new QueryableCollectionView(context.Applicants); 070. context.Load(context.GetApplicantsQuery()); 071. 072. AddAppointmentCommand = new DelegateCommand<object>(this.AddAppt); 073. ApptCreatingCommand = new DelegateCommand<object>(this.ApptCreating); 074. ApptEditedCommand = new DelegateCommand<object>(this.ApptEdited); 075. ApptDeletedCommand = new DelegateCommand<object>(this.ApptDeleted); 076. 077. } 078. 079. void loadOp_Completed(object sender, EventArgs e) 080. { 081. LoadOperation loadop = sender as LoadOperation; 082. 083. foreach (var ent in loadop.Entities) 084. { 085. _interviews.Add(EntityToAppointment(ent as Interview)); 086. } 087. } 088. 089. #region Appointment Adding 090. 091. public void AddAppt(object obj) 092. { 093. // now we have a new InterviewAppointment to add to our QCV :) 094. InterviewAppointment newInterview = obj as InterviewAppointment; 095. 096. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 097. this.context.SubmitChanges((s) => 098. { 099. ActionHistory myAction = new ActionHistory(); 100. myAction.InterviewID = newInterview.InterviewID; 101. myAction.PostingID = newInterview.PostingID; 102. myAction.ApplicantID = newInterview.ApplicantID; 103. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 104. myAction.TimeStamp = DateTime.Now; 105. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 106. } 107. , null); 108. } 109. 110. public void ApptCreating(object obj) 111. { 112. // handled in the behavior, just a placeholder to ensure it runs :) 113. } 114. 115. #endregion 116. 117. #region Appointment Editing 118. 119. public void ApptEdited(object obj) 120. { 121. Interview editedInterview = (from x in context.Interviews 122. where x.InterviewID == (obj as InterviewAppointment).InterviewID 123. select x).SingleOrDefault(); 124. 125. CopyAppointmentEdit(editedInterview, obj as InterviewAppointment); 126. 127. context.SubmitChanges((s) => { 128. ActionHistory myAction = new ActionHistory(); 129. myAction.InterviewID = editedInterview.InterviewID; 130. myAction.PostingID = editedInterview.PostingID; 131. myAction.ApplicantID = editedInterview.ApplicantID; 132. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 133. myAction.TimeStamp = DateTime.Now; 134. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); } 135. , null); 136. } 137. 138. #endregion 139. 140. #region Appointment Deleting 141. 142. public void ApptDeleted(object obj) 143. { 144. Interview deletedInterview = (from x in context.Interviews 145. where x.InterviewID == (obj as InterviewAppointment).InterviewID 146. select x).SingleOrDefault(); 147. 148. context.Interviews.Remove(deletedInterview); 149. context.SubmitChanges((s) => 150. { 151. ActionHistory myAction = new ActionHistory(); 152. myAction.InterviewID = deletedInterview.InterviewID; 153. myAction.PostingID = deletedInterview.PostingID; 154. myAction.ApplicantID = deletedInterview.ApplicantID; 155. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 156. myAction.TimeStamp = DateTime.Now; 157. eventAggregator.GetEvent<AddActionEvent>().Publish(myAction); 158. } 159. , null); 160. } 161. 162. #endregion 163. 164. #region Appointment Helpers :) 165. 166. public Interview AppointmentToEntity(InterviewAppointment ia) 167. { 168. Interview newInterview = new Interview(); 169. newInterview.Subject = ia.Subject; 170. newInterview.Body = ia.Body; 171. newInterview.Start = ia.Start; 172. newInterview.End = ia.End; 173. newInterview.ApplicantID = ia.ApplicantID; 174. newInterview.PostingID = ia.PostingID; 175. newInterview.InterviewID = ia.InterviewID; 176. 177. return newInterview; 178. } 179. 180. public InterviewAppointment EntityToAppointment(Interview ia) 181. { 182. InterviewAppointment newInterview = new InterviewAppointment(); 183. newInterview.Subject = ia.Subject; 184. newInterview.Body = ia.Body; 185. newInterview.Start = ia.Start; 186. newInterview.End = ia.End; 187. newInterview.ApplicantID = ia.ApplicantID; 188. newInterview.PostingID = ia.PostingID; 189. newInterview.InterviewID = ia.InterviewID; 190. 191. return newInterview; 192. } 193. 194. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 195. { 196. entityInterview.Subject = appointmentInterview.Subject; 197. entityInterview.Body = appointmentInterview.Body; 198. entityInterview.Start = appointmentInterview.Start; 199. entityInterview.End = appointmentInterview.End; 200. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 201. entityInterview.PostingID = appointmentInterview.PostingID; 202. } 203. 204. #endregion 205.} One thing we're doing here which you won't see in any of the other ViewModels is creating a duplicate collection. I know this is something which will be fixed down the line for using RadScheduler, simplifying this process, but with WCF RIA changing as it does I wanted to ensure functionality would remain consistent as I continued development on this application. So, I do a little bit of duplication, but for the greater good. This all takes place starting on line 79, so for every entity that comes back we add it to the collection that is bound to RadScheduler. Otherwise, the DelegateCommands that you see correspond directly to the events they are named after. In each case, rather than sending over the full event arguments, I just send in the appointment in question (coming through as the object obj in all cases) so I can add (line 91), edit (line 119), and delete appointments (line 142) like normal. This just ensures they get updated back to my database. Also, the one bit of code you won't see is for the Appointment Creating (line 110) event- that is because in the command I've created I simply make the replacement I need to: 1.void element_AppointmentCreating(object sender, AppointmentCreatingEventArgs e) 2.{ 3. e.NewAppointment = new InterviewAppointment(); 4. base.ExecuteCommand(); 5.} And the ViewModel is none the wiser, the appointments just work as far as it is concerned since as they are created they become InterviewAppointments. End result? I've customized my EditAppointmentDialog as follows: And adding, editing, and deleting appointments works like a charm. I can even 'edit' by moving appointments around RadScheduler, so as they are dropped into a timeslot they perform their full edit routine and things get updated. And then, the Code-Behind Version Perhaps the thing I like the most about doing one then the other is I get to steal 90% or more of the code from the MVVM version. For example, the only real changes to the Code-Behind Xaml file exist in the control declaration, in which I use events instead of attached-behavior-event-commands: 01.<telerikScheduler:RadScheduler x:Name="xJobsScheduler" 02. Grid.Row="1" 03. Grid.Column="1" 04. Width="800" 05. MinWidth="600" 06. Height="500" 07. MinHeight="300" 08. EditAppointmentStyle="{StaticResource EditAppointmentStyle}" 09. AppointmentAdded="xJobsScheduler_AppointmentAdded" 10. AppointmentCreating="xJobsScheduler_AppointmentCreating" 11. AppointmentEdited="xJobsScheduler_AppointmentEdited" 12. AppointmentDeleted="xJobsScheduler_AppointmentDeleted"> 13.</telerikScheduler:RadScheduler> Easy, right? Otherwise, all the same styling in UserControl.Resources was re-used, right down to the DataContextProxy that lets us bind to a collection from our viewmodel (in this case, our code-behind) to use within the DataTemplate. The code conversion gets even easier, as I could literally copy and paste almost everything from the ViewModel to my Code-Behind, just a matter of pasting the right section into the right event. Here's the code-behind as proof: 001.public partial class SchedulingView : UserControl, INotifyPropertyChanged 002.{ 003. public RecruitingContext context; 004. 005. private QueryableCollectionView _jobsList; 006. public QueryableCollectionView JobsList 007. { 008. get { return this._jobsList; } 009. set 010. { 011. if (this._jobsList != value) 012. { 013. this._jobsList = value; 014. this.NotifyChanged("JobsList"); 015. } 016. } 017. } 018. 019. private QueryableCollectionView _applicantList; 020. public QueryableCollectionView ApplicantList 021. { 022. get { return _applicantList; } 023. set 024. { 025. if (_applicantList != value) 026. { 027. _applicantList = value; 028. NotifyChanged("ApplicantList"); 029. } 030. } 031. } 032. 033. private ObservableItemCollection<InterviewAppointment> _interviews = new ObservableItemCollection<InterviewAppointment>(); 034. public ObservableItemCollection<InterviewAppointment> Interviews 035. { 036. get { return _interviews; } 037. set 038. { 039. if (_interviews != value) 040. { 041. _interviews = value; 042. NotifyChanged("Interviews"); 043. } 044. } 045. } 046. 047. public SchedulingView() 048. { 049. InitializeComponent(); 050. 051. this.DataContext = this; 052. 053. this.Loaded += new RoutedEventHandler(SchedulingView_Loaded); 054. } 055. 056. void SchedulingView_Loaded(object sender, RoutedEventArgs e) 057. { 058. this.xJobsScheduler.AppointmentsSource = Interviews; 059. 060. context = new RecruitingContext(); 061. 062. LoadOperation loadop = context.Load(context.GetInterviewsQuery()); 063. loadop.Completed += new EventHandler(loadop_Completed); 064. 065. this._applicantList = new QueryableCollectionView(context.Applicants); 066. context.Load(context.GetApplicantsQuery()); 067. 068. this._jobsList = new QueryableCollectionView(context.JobPostings); 069. context.Load(context.GetJobPostingsQuery()); 070. } 071. 072. void loadop_Completed(object sender, EventArgs e) 073. { 074. LoadOperation loadop = sender as LoadOperation; 075. 076. _interviews.Clear(); 077. 078. foreach (var ent in loadop.Entities) 079. { 080. _interviews.Add(EntityToAppointment(ent as Interview)); 081. } 082. } 083. 084. private void xJobsScheduler_AppointmentAdded(object sender, Telerik.Windows.Controls.AppointmentAddedEventArgs e) 085. { 086. // now we have a new InterviewAppointment to add to our QCV :) 087. InterviewAppointment newInterview = e.Appointment as InterviewAppointment; 088. 089. this.context.Interviews.Add(AppointmentToEntity(newInterview)); 090. this.context.SubmitChanges((s) => 091. { 092. ActionHistory myAction = new ActionHistory(); 093. myAction.InterviewID = newInterview.InterviewID; 094. myAction.PostingID = newInterview.PostingID; 095. myAction.ApplicantID = newInterview.ApplicantID; 096. myAction.Description = String.Format("Interview with {0} has been created by {1}", newInterview.ApplicantID.ToString(), "default user"); 097. myAction.TimeStamp = DateTime.Now; 098. context.ActionHistories.Add(myAction); 099. context.SubmitChanges(); 100. } 101. , null); 102. } 103. 104. private void xJobsScheduler_AppointmentCreating(object sender, Telerik.Windows.Controls.AppointmentCreatingEventArgs e) 105. { 106. e.NewAppointment = new InterviewAppointment(); 107. } 108. 109. private void xJobsScheduler_AppointmentEdited(object sender, Telerik.Windows.Controls.AppointmentEditedEventArgs e) 110. { 111. Interview editedInterview = (from x in context.Interviews 112. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 113. select x).SingleOrDefault(); 114. 115. CopyAppointmentEdit(editedInterview, e.Appointment as InterviewAppointment); 116. 117. context.SubmitChanges((s) => 118. { 119. ActionHistory myAction = new ActionHistory(); 120. myAction.InterviewID = editedInterview.InterviewID; 121. myAction.PostingID = editedInterview.PostingID; 122. myAction.ApplicantID = editedInterview.ApplicantID; 123. myAction.Description = String.Format("Interview with {0} has been modified by {1}", editedInterview.ApplicantID.ToString(), "default user"); 124. myAction.TimeStamp = DateTime.Now; 125. context.ActionHistories.Add(myAction); 126. context.SubmitChanges(); 127. } 128. , null); 129. } 130. 131. private void xJobsScheduler_AppointmentDeleted(object sender, Telerik.Windows.Controls.AppointmentDeletedEventArgs e) 132. { 133. Interview deletedInterview = (from x in context.Interviews 134. where x.InterviewID == (e.Appointment as InterviewAppointment).InterviewID 135. select x).SingleOrDefault(); 136. 137. context.Interviews.Remove(deletedInterview); 138. context.SubmitChanges((s) => 139. { 140. ActionHistory myAction = new ActionHistory(); 141. myAction.InterviewID = deletedInterview.InterviewID; 142. myAction.PostingID = deletedInterview.PostingID; 143. myAction.ApplicantID = deletedInterview.ApplicantID; 144. myAction.Description = String.Format("Interview with {0} has been deleted by {1}", deletedInterview.ApplicantID.ToString(), "default user"); 145. myAction.TimeStamp = DateTime.Now; 146. context.ActionHistories.Add(myAction); 147. context.SubmitChanges(); 148. } 149. , null); 150. } 151. 152. #region Appointment Helpers :) 153. 154. public Interview AppointmentToEntity(InterviewAppointment ia) 155. { 156. Interview newInterview = new Interview(); 157. newInterview.Subject = ia.Subject; 158. newInterview.Body = ia.Body; 159. newInterview.Start = ia.Start; 160. newInterview.End = ia.End; 161. newInterview.ApplicantID = ia.ApplicantID; 162. newInterview.PostingID = ia.PostingID; 163. newInterview.InterviewID = ia.InterviewID; 164. 165. return newInterview; 166. } 167. 168. public InterviewAppointment EntityToAppointment(Interview ia) 169. { 170. InterviewAppointment newInterview = new InterviewAppointment(); 171. newInterview.Subject = ia.Subject; 172. newInterview.Body = ia.Body; 173. newInterview.Start = ia.Start; 174. newInterview.End = ia.End; 175. newInterview.ApplicantID = ia.ApplicantID; 176. newInterview.PostingID = ia.PostingID; 177. newInterview.InterviewID = ia.InterviewID; 178. 179. return newInterview; 180. } 181. 182. public void CopyAppointmentEdit(Interview entityInterview, InterviewAppointment appointmentInterview) 183. { 184. entityInterview.Subject = appointmentInterview.Subject; 185. entityInterview.Body = appointmentInterview.Body; 186. entityInterview.Start = appointmentInterview.Start; 187. entityInterview.End = appointmentInterview.End; 188. entityInterview.ApplicantID = appointmentInterview.ApplicantID; 189. entityInterview.PostingID = appointmentInterview.PostingID; 190. } 191. 192. #endregion 193. 194. #region INotifyPropertyChanged Members 195. 196. public event PropertyChangedEventHandler PropertyChanged; 197. 198. public void NotifyChanged(string propertyName) 199. { 200. if (string.IsNullOrEmpty(propertyName)) 201. throw new ArgumentException("propertyName"); 202. 203. PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); 204. } 205. 206. #endregion 207.} Nice... right? :) One really important thing to note as well. See on line 51 where I set the DataContext before the Loaded event? This is super important, as if you don't have this set before the usercontrol is loaded, the DataContextProxy has no context to use and your EditAppointmentDialog Job/Applicant dropdowns will be blank and empty. Trust me on this, took a little bit of debugging to figure out that by setting the DataContext post-loaded would only lead to disaster and frustration. Otherwise, the only other real difference is that instead of sending an ActionHistory item through an event to get added to the database and saved, I do those right in the callback from submitting. The Result Again, I only have to post one picture because these bad boys used nearly identical code for both the MVVM and the code-behind views, so our end result is... So what have we learned here today? One, for the most part this MVVM thing is somewhat easy. Yeah, you sometimes have to write a bunch of extra code, but with the help of a few useful snippits you can turn the process into a pretty streamlined little workflow. Heck, this story gets even easier as you can see in this blog post by Michael Washington- specifically run a find on 'InvokeCommandAction' and you'll see the section regarding the command on TreeView in Blend 4. Brilliant! MVVM never looked so sweet! Otherwise, it is business as usual with RadScheduler for Silverlight whichever path you're choosing for your development. Between now and the next post, I'll be cleaning up styles a bit (those RadComboBoxes are a little too close to my labels!) and adding some to the RowDetailsViews for Applicants and Jobs, so you can see all the info for an appointment in the dropdown tab view. Otherwise, we're about ready to call a wrap on this oneDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Part 2: Career development as a Software Developer without becoming a manager.

- by albertpascual

Seems like my previous post inspired by the work of Michael “Doc” Norton was a great success for the amount of emails I have received. Yet amazed how many people didn’t want to discuss their questions in the comments sections. I would encourage people to be more public, still I would like to reply to all of you on this public media. I still welcome those emails. What I found out is that many people feels like me, they want to be developers and still be compensated for their experience without wanting to take a job as a manager. Their perfect day is a full day of coding and learning. Many believe their companies will never pay a manager’s salary to a developer no matter what. Most of you ask how to get the ball rolling. And is the later that I’m addressing here, the previous group, will never try. What companies understand developers value and where can I find them? This is a very difficult question to ask, I don’t have a list of those companies or departments, I have seen in my past signs in companies bending backwards to compensate, in more ways the monetary, a developer that is a good resource to them. Allowing the person to move out of the state and still let them work for the company from home is a sign that company goes by individual cases. Allowing them to go to conference that will not benefit the company is another big sign. Simple signs like flexible hours and letting some people work from home. To see those signs you need to be working in that company for awhile and look at the departments where the manager is taking care of their employees in individual cases. Look for the department where people get quiet extra perks, where some people in the department work from home or remotely. In my experience, but not always true, medium to big companies, are prompt to recognize good developers. Then again, some companies just don’t get it and is when you see many technical people managing developers. For all the people that email me stating that developers can also be very good managers, I do not disagree, I just think that a good developers loves writing code, when you remove that part the better salary isn’t enough to keep a developer happy. Burned out developers appreciate being promoted to managers. How do I know I work in a bad company? In my experience I have been a consultant and seen many companies, a few signs I have learned about companies that will not recognize good developers are: When the turn over is pretty high, when developers are moving out in a big rate, no rocket scientist needs to tap you in the shoulder. When the company is looking always to outsource their development resources. The product is not that interesting nor the company cares too much for their final result and support. Code sweat shops. You’ll know when you start working in one of those. Run for the hills! Where do I start? Disclaimer: I have only based this post on Michael “Doc” Norton, this is just my interpretation and ideas. First thing is to look at Michael “Doc” Norton presentation Take Control of Your Development Career http://docondev.blogspot.com/ That should be the first thing any developer should look and follow like it was a pattern. I would personally recommend to find some language or pattern you are interested with and learn it, learn something that will make you happy. Second, join a User Group and get involve in the community. There are hundreds of user groups, and I’m sure you’ll find one in your city or near you town. Code Camps are Developers Meet Ups are also good resources. Third, I would join a open source project you are interested or better yet, create a new open source project with the new technology that you have learn and get coding. Fourth, create a Twitter account and follow the people that talks about the technology you are interested on. If you follow this 4 steps above I think you’ll be on your way, after they are complete, when you release your Open Source project you can say that you accomplished the first steps. Now, do not expect anything to change in your career life, you are changing and should not expect anything in return, besides borrowing some time from sleeping and your family. Creating a good schedule may help you, I find wasted time in many places that I use. Flying for work is actually one of those that allows me to do my best work on a airplane, don’t need to borrow time from anywhere else. Making sure you always have a light, charged laptop is so important. Next steps following the Michael “Doc” Norton Pattern or my interpretation of. First, help run a user group or better yet, start a new user group. I’ll add, as well, go to one conference a year and free development events around your city; Code Camps, Geek Dinners, etc. There are many free events sponsored by different companies for developers to get to know their products, I highly recommend those as the way to get connected. Second, chose a mentor, this is a very hard thing to do I experienced, find an expert in the technology you are learning that has the time for you, it is difficult, I wish you best of luck. Third, learn another technology or pattern, open your horizons a little bit more. Why not, if you had fun previously, keep doing it. Fourth, get involved in forums to answer and ask questions, getting notice in public forums is rewarding for your ego after such a long journey. Final steps following the Michael “Doc” Norton Pattern Teach what you know, become humble on your knowledge, find as many opportunities to teach and to get involved with the community, bring all that to your day job. Mr. Norton talks about getting naked, expose yourself to others in your knowledge and what you do not know. You are never too important for small opportunities, yet don’t be afraid to take anything big and learn from the experience. Anytime you have the opportunity to talk to somebody that has reach the point the community knows his or her name, means that you should learn from it. Take opportunities that won’t make you money, yet will make you happy. Sometimes you need to spend money and time. Register talks in Code Camps and Dev Meet Ups, those are free, also go to Conference, Development Summits and Geek Diners for example. One day, people will pay you to attend. When will all these pay off? I don’t know. I’m still in the path, there are a few things that during your journey you may get little acknowledgements that you are in the correct path. In my case I think those are the little signs that tells you about your journey. I got awarded the Microsoft Most Valuable Professional for ASP.NET in 2007, 2008, 2009 and 2010. I got selected to speak at the DevConnections in Las Vegas in 2010 and Orlando 2011. I do believe that I do have a long way to go, yet what I do makes me happy and I hope I can keep doing for years to come. Every year I can see an improvement on my code, and more frameworks and languages are under my belt, I learn to embrace them all as well as in my daily job, I have been able to work in a few projects beyond my department. I’m a learner and believer of the Michael “Doc” Norton pattern. Looking forward to learn more about it to be able to apply it better. In my short journey I now see my mistakes, I did a few things right, I have been listening the intelligent people and not being afraid to move along the technology changes. In my professional life, I have tried to avoid being placed in only one technology and product. I have always share my code and never confused anybody that wanted to take over any of my projects, I didn’t think anything I created as my own nor care too much when politics didn’t see my vision. I stayed flexible, ready and visible, yet humble. I keep my head just below the clouds, and avoided managers meetings. I credit my manager for my success, and I faulted publicly only myself for the failures. Hope this helps. Cheers, Al Follow me in Twitter Read my previous post tweetmeme_url = 'http://weblogs.asp.net/albertpascual/archive/2010/12/09/part-2-career-development-as-a-software-developer-without-becoming-a-manager.aspx'; tweetmeme_source = 'alpascual';

Read the article

In Which We Demystify A Few Docupresentment Settings And Learn the Ethos of the Author

- by Andy Little

It's no secret that Docupresentment (part of the Oracle Documaker suite) is powerful tool for integrating on-demand and interactive applications for publishing with the Oracle Documaker framework. It's also no secret there are are many details with respect to the configuration of Docupresentment that can elude even the most erudite of of techies. To be sure, Docupresentment will work for you right out of the box, and in most cases will suit your needs without toying with a configuration file. But, where's the adventure in that? With this inaugural post to That's The Way, I'm going to introduce myself, and what my aim is with this blog. If you didn't figure it out already by checking out my profile, my name is Andy and I've been with Oracle (nee Skywire Software nee Docucorp nee Formmaker) since the formative years of 1998. Strangely, it doesn't seem that long ago, but it's certainly a lifetime in the age of technology. I recall running a BBS from my parent's basement on a 1200 baud modem, and the trepidation and sweaty-palmed excitement of upgrading to the power and speed of 2400 baud! Fine, I'll admit that perhaps I'm inflating the experience a bit, but I was kid! This is the stuff of War Games and King's Quest I and the demise of TI-99 4/A. Exciting times. So fast-forward a bit and I'm 12 years into a career in the world of document automation and publishing working for the best (IMHO) software company on the planet. With That's The Way I hope to shed a little light and peek under the covers of some of the more interesting aspects of implementations involving the tech space within the Oracle Insurance Global Business Unit (IGBU), which includes Oracle Documaker, Rating & Underwriting, and Policy Administration to name a few. I may delve off course a bit, and you'll likely get a dose of humor (at least in my mind) but I hope you'll glean at least a tidbit of usefulness with each post. Feel free to comment as I'm a fairly conversant guy and happy to talk -- it's stopping the talking that's the hard part... So, back to our regularly-scheduled post, already in progress. By this time you've visited Oracle's E-Delivery site and acquired your properly-licensed version of Oracle Documaker. Wait -- you didn't find it? Understandable -- navigating the voluminous download library within Oracle can be a daunting task. It's pretty simple once you’ve done it a few times. Login to the e-delivery site, and accept the license terms and restrictions. Then, you’ll be able to select the Oracle Insurance Applications product pack and your appropriate platform. Click Go and you’ll see a list of applicable products, and you’ll click on Oracle Documaker Media Pack (as I went to press with this article the version is 11.4): Finally, click the Download button next to Docupresentment (again, version at press time is 2.2 p5). This should give you a ZIP file that contains the installation packages for the Docupresentment Server and Client, cryptically named IDSServer22P05W32.exe and IDSClient22P05W32.exe. At this time, I’d like to take a little detour and explain that the world of Oracle, like most technical companies, is rife with acronyms. One of the reasons Skywire Software was a appealing to Oracle was our use of many acronyms, including the occasional use of multiple acronyms with the same meaning. I apologize in advance and will try to point these out along the way. Here’s your first sticky note to go along with that: IDS = Internet Document Server = Docupresentment Once you’ve completed the installation, you’ll have a shiny new Docupresentment server and client, and if you installed the default location it will be living in c:\docserv. Unix users, I’m one of you! You’ll find it by default in ~/docupresentment/docserv. Forging onward with the meat of this post is learning about some special configuration options. By now you’ve read the documentation included with the download (specifically ids_book.pdf) which goes into some detail of the rubric of the configuration file and in fact there’s even a handy utility that provides an interface to the configuration file (see Running IDSConfig in the documentation). But who wants to deal with a configuration utility when we have the tools and technology to edit the file <gasp> by hand! I shall now proceed with the standard Information Technology Under the Hood Disclaimer: Please remember to back up any files before you make changes. I am not responsible for any havoc you may wreak! Go to your installation directory, and locate your docserv.xml file. Open it in your favorite XML editor. I happen to be fond of Notepad++ with the XML Tools plugin. Almost immediately you will behold the splendor of the configuration file. Just take a moment and let that sink in. Ok – moving on. If you reviewed the documentation you know that inside the root <configuration> node there are multiple <section> nodes, each containing a specific group of settings. Let’s take a look at <section name=”DocumentServer”>: There are a few entries I’d like to discuss. First, <entry name=”StartCommand”>. This should be pretty self-explanatory; it’s the name of the executable that’s run when you fire up Docupresentment. Immediately following that is <entry name=”StartArguments”> and as you might imagine these are the arguments passed to the executable. A few things to point out: The –Dids.configuration=docserv.xml parameter specifies the name of your configuration file. The –Dlogging.configuration=logconf.xml parameter specifies the name of your logging configuration file (this uses log4j so bone up on that before you delve here). The -Djava.endorsed.dirs=lib/endorsed parameter specifies the path where 3rd party Java libraries can be located for use with Docupresentment. More on that in another post. The <entry name=”Instances”> allows you to specify the number of instances of Docupresentment that will be started. By default this is two, and generally two instances per CPU is adequate, however you will always need to perform load testing to determine the sweet spot based on your hardware and types of transactions. You may have many, many more instances than 2. Time for a sidebar on instances. An instance is nothing more than a separate process of Docupresentment. The Docupresentment service that you fire up with docserver.bat or docserver.sh actually starts a watchdog process, which is then responsible for starting up the actual Docupresentment processes. Each of these act independently from one another, so if one crashes, it does not affect any others. In the case of a crashed process, the watchdog will start up another instance so the number of configured instances are always running. Bottom line: instance = Docupresentment process. And now, finally, to the settings which gave me pause on an not-too-long-ago implementation! Docupresentment includes a feature that watches configuration files (such as docserv.xml and logconf.xml) and will automatically restart its instances to load the changes. You can configure the time that Docupresentment waits to check these files using the setting <entry name=”FileWatchTimeMillis”>. By default the number is 12000ms, or 12 seconds. You can save yourself a few CPU cycles by extending this time, or by disabling the check altogether by setting the value to 0. This may or may not be appropriate for your environment; if you have 100% uptime requirements then you probably don’t want to bring down an entire set of processes just to accept a new configuration value, so it’s best to leave this somewhere between 12 seconds to a few minutes. Another point to keep in mind: if you are using Documaker real-time processing under Docupresentment the Master Resource Library (MRL) files and INI options are cached, and if you need to affect a change, you’ll have to “restart” Docupresentment. Touching the docserv.xml file is an easy way to do this (other methods including using the RSS request, but that’s another post). The next item up: <entry name=”FilePurgeTimeSeconds”>. You may already know that the Docupresentment system can generate many temporary files based on certain request types that are processed through the system. What you may not know is how those files are cleaned up. There are many rules in Docupresentment that cause the creation of temporary files. When these files are created, Docupresentment writes an entry into a properties file called the file cache. This file contains the name, creation date, and expiration time of each temporary file created by each instance of Docupresentment. Periodically Docupresentment will check the file cache to determine if there are files that are past the expiration time, not unlike that block of cheese festering away in the back of my refrigerator. However, unlike my ‘fridge cleaning tendencies, Docupresentment is quick to remove files that are past their expiration time. You, my friend, have the power to control how often Docupresentment inspects the file cache. Simply set the value for <entry name=”FilePurgeTimeSeconds”> to the number of seconds appropriate for your requirements and you’re set. Note that file purging happens on a separate thread from normal request processing, so this shouldn’t interfere with response times unless the CPU happens to be really taxed at the point of cache processing. Finally, after all of this, we get to the final setting I’m going to address in this post: <entry name=”FilePurgeList”>. The default is “filecache.properties”. This establishes the root name for the Docupresentment file cache that I mentioned previously. Docupresentment creates a separate cache file for each instance based on this setting. If you have two instances, you’ll see two files created: filecache.properties.1 and filecache.properties.2. Feel free to open these up and check them out. I hope you’ve enjoyed this first foray into the configuration file of Docupresentment. If you did enjoy it, feel free to drop a comment, I welcome feedback. If you have ideas for other posts you’d like to see, please do let me know. You can reach me at [email protected]. ‘Til next time! ###

Read the article

ODEE Green Field (Windows) Part 5 - Deployment and Validation

- by AndyL-Oracle

And here we are, almost finished with our installation of Oracle Documaker Enterprise Edition ("ODEE") in a Windows green field environment. Let's recap what we've done so far: In part 1, I went over the basic process that I intended to show with installing an ODEE on a green field server. I walked you through the basic installation of Oracle 11g database In part 2, I covered the installation of WebLogic application server. In part 3, I showed you how to install SOA Suite for WebLogic. In part 4, we did the first part of the installation of ODEE itself. What remains after all of that, is the deployment of the ODEE components onto the database and application server - so let's get to it! DATABASE First, we'll deploy the schemas to the database. The schemas are created during the ODEE installation according to the responses provided during the install process. To deploy the schemas, you'll need to login to the database server in your green field environment. Open a command line and CD into ODEE_HOME\documaker\database\oracle11g.Run SQLPLUS as SYSDBA and execute dmkr_admin.sql: sqlplus / as sysdba @dmkr_admin.sql Execute dmkr_asline.sql, dmkr_admin_correspondence_example.sql. If you require additional languages, run the appropriate SQL scripts (e.g. dmkr_asline_es.sql for Spanish). APPLICATION SERVER Next, we'll deploy the WebLogic domain and it's components - Documaker web services, Documaker Interactive, Documaker dashboard, and more. To deploy the components, you'll need to login to the application server in your green field environment. 1. Open Windows Explorer and navigate to ODEE_HOME\documaker\j2ee\weblogic\oracle11g\scripts.2. Using a text editor such as Notepad++, modify weblogic_installation_properties and set location of MIDDLEWARE_HOME and ODEE HOME. If you have used the defaults you’ll probably need to change the E: to C: and that’s it. Save the changes.3. Continuing in the same directory, use your text editor to modify set_middleware_env.cmd and set the drive and path to MIDDLEWARE_HOME. If you have used the defaults you’ll probably need to just change E: to C: and that’s it. Save the changes.4. In the same directory, execute wls_create_domain.cmd by double-clicking it. This should run to completion. If it does not, review any errors and correct them, and rerun the script.5. In the same directory, execute wls_add_correspondence.cmd by double-clicking it - again this should run to completion. 6. Next, we'll start the AdminServer - this is the main WebLogic domain server. To start it, use Windows Explorer and navigate to MIDDLEWARE_HOME\user_projects\domains\idocumaker_domain. Double-click startWebLogic.cmd and the server startup will begin. Once you see output that indicates that the server status changed to RUNNING you may proceed. a. Note: if you saw database connection errors, you probably didn’t make sure your database name and connection type match. You can change this manually in the WebLogic Console. Open a browser and navigate to http://localhost:7001/console (replace localhost with the name of your application server host if you aren't opening the browser on the server), and login with the the weblogic credential you provided in the ODEE installation process. b. Once you're logged in, open Services?Data Sources. Select dmkr_admin and click Connection Pool. c. The end of the URL should match the connection type you chose. If you chose ServiceName, the URL should be: jdbc:oracle:thin:@//<hostname>:1521/<serviceName> and if you chose SID, the URL should be: jdbc:oracle:thin:@//<hostname>:1521/<SIDname> d. An example serviceName is a fully qualified DNS-style name, e.g. "idmaker.us.oracle.com". (It does not need to actually resolve in DNS). An example SID is just a name, e.g. IDMAKER. e. Save the change and repeat for the data source dmkr_asline. f. You will also need to make the same changes in the ODEE_HOME/documaker/docfactory/config/context/.bindings file - open the file in a text editor, locate the URL lines and make the appropriate change, then save the file. 7. Back in the ODEE_HOME\documaker\j2ee\weblogic\oracle11g\scripts directory, execute create_users_groups.cmd. 8. In the same directory, execute create_users_groups_correspondence_example.cmd. 9. Open a browser and navigate to http://localhost:7001/jpsquery. Replace localhost with the name of your application server host if you aren't running the browser on the application server. If you changed the default port for the AdminServer from 7001, use the port you changed it to. You should see output like this: 10. Start the WebLogic managed servers by opening a command prompt and navigating to MIDDLEWARE_HOME/user_projects/domains/idocumaker_domain/bin/. When you start the servers listed below, you will be prompted to enter the WebLogic credentials to start the server. You can prevent this by providing the credential in the startManagedwebLogic.cmd file for the WLS_USER and WLS_PASS values. Note that the credential will be stored in cleartext. To start the server, type in the command shown. a. Start the JMS Server: ./startManagedWebLogic.cmd jms_server b. Start Dashboard/Documaker Administrator: ./startManagedWebLogic.cmd dmkr_server c. Start Documaker Interactive for Correspondence: ./startManagedWebLogic.cmd idm_server SOA Composites If you're planning on testing out the approval process components of BPEL that can be used with Documaker Interactive, then use the following steps to deploy the SOA composites. If you're not going to use BPEL, you can skip to the next section.1. Stop the servers listed in the previous section (Step 10) in the reverse order that they were started.2. Run the Domain configuration command: navigate to and execute MIDDLEWARE_HOME/wlserver_10.3/common/bin/config.cmd.3. Select Extend and click next. 4. Select the iDocumaker Domain and click Next. 5. Select the Oracle SOA Suite – 11.1.1.0 (this may automatically select other components which is OK). Click Next. 6. View the Configure JDBC resources screen. You should not make any changes. Click Next. 7. Check both connections and click Test Connections. After successful test, click Next. If the tests fail, something is broken. Go back to configure JDBC resources and check your service name/SID. 8. Check all schemas. Set a password (will be the same for all schemas). Enter the database information (service name, host name, port). Click Next. 9. Connections should test successfully. If not, go back and fix any errors. Click Next. 10. Click Next to pass through Optional Configuration. 11. Click Extend. 12. Click Done. 13. Open a terminal window and navigate to/execute: ODEE_HOME/documaker/j2ee/weblogic/oracle11g/bpel/antbuild.cmd14. Start the WebLogic Servers – AdminServer, jms_server, dmkr_server, idm_server. If you forgot how to do this, see the previous section Step 10. Note: if you previously changed the startManagedWebLogic.cmd script for WLS_USER and WLS_PASS you will need to make those changes again. 15. Start the WebLogic server soa_server1: MIDDLEWARE_HOME/user_projects/domains/idocumaker_domain/bin/startManagedWebLogic.cmd soa_server116. Open a browser to http://localhost:7001/console and login. 17. Navigate to Services?Data Sources and select DMKR_ASLINE. 18. Click the Targets tab. Check soa_server1, then click Save. Repeat for the DMKR_ADMIN data source. 19. Open a command prompt and navigate to ODEE_HOME/j2ee/weblogic/oracle11g/scripts, then execute deploy_soa.cmd. That's it! (As if that wasn't enough?) DOCUMAKER Deploy the sample MRL resources by navigating to/executing ODEE_HOME/documaker/mstrres/dmres/deploysamplemrl.bat. You should see approximately 500 resources deployed into the database. Start the Factory Services. Start?Run?services.msc. Locate the service named "ODDF xxxx" and right-click, select Start. Note that each Assembly Line has a separate Factory setup, including its own Factory service and Docupresentment service. The services are named for the assembly line and the machine on which they are installed (because you could have multiple machines servicing a single assembly line, so this allows for easy scripting to control all the services if you choose to do so. Repeat for the Docupresentment service. Note that each Assembly Line has a separate Docupresentment. Using Windows Explorer, navigate to ODEE_HOME/documaker/mstrres/dmres/input and select one of the XML files, and copy it into ODEE_HOME/documaker/hotdirectory. Note: if you chose a different hot directory during installation, copy the file there instead. Momentarily you should see the XML file disappear! Open browser and navigate to http://localhost:10001/DocumakerDashboard (previous versions 12.0-12.2 use http://localhost:10001/dashboard) and verify that job processed successfully. Note that some transactions may fail if you do not have a properly configured email server, and this is ok. You can set up a simple SMTP server (just search the internet for "SMTP developer" and you'll get several to choose from. So... that's it? Where are we at this point? You now have a completely functional ODEE installation, from soup to nuts as they say. You can further expand your installation by doing some of the following activities: clustering WebLogic services configuring WebLogic for redundancy configuring Oracle 11g for RAC adding additional Factory servers for redundancy/processing capacity setting up a real MRL (instead of the sample resources) testing Documaker Web Services for job submission and more! I certainly hope you've enjoyed this and find it useful. If you find yourself running into trouble, visit the Oracle Community for Documaker - there is plenty of activity there and you can ask questions. For more concentrated assistance, you can engage an Oracle consultant who is a subject matter expert to assist you. Feel free to email me [andy (dot) little (at) oracle (dot) com] and I can connect you with the appropriate resource to get started. Best of luck! -Andy

Read the article

Performance Optimization – It Is Faster When You Can Measure It

- by Alois Kraus

Performance optimization in bigger systems is hard because the measured numbers can vary greatly depending on the measurement method of your choice. To measure execution timing of specific methods in your application you usually use Time Measurement Method Potential Pitfalls Stopwatch Most accurate method on recent processors. Internally it uses the RDTSC instruction. Since the counter is processor specific you can get greatly different values when your thread is scheduled to another core or the core goes into a power saving mode. But things do change luckily: Intel's Designer's vol3b, section 16.11.1 "16.11.1 Invariant TSC The time stamp counter in newer processors may support an enhancement, referred to as invariant TSC. Processor's support for invariant TSC is indicated by CPUID.80000007H:EDX[8]. The invariant TSC will run at a constant rate in all ACPI P-, C-. and T-states. This is the architectural behavior moving forward. On processors with invariant TSC support, the OS may use the TSC for wall clock timer services (instead of ACPI or HPET timers). TSC reads are much more efficient and do not incur the overhead associated with a ring transition or access to a platform resource." DateTime.Now Good but it has only a resolution of 16ms which can be not enough if you want more accuracy. Reporting Method Potential Pitfalls Console.WriteLine Ok if not called too often. Debug.Print Are you really measuring performance with Debug Builds? Shame on you. Trace.WriteLine Better but you need to plug in some good output listener like a trace file. But be aware that the first time you call this method it will read your app.config and deserialize your system.diagnostics section which does also take time. In general it is a good idea to use some tracing library which does measure the timing for you and you only need to decorate some methods with tracing so you can later verify if something has changed for the better or worse. In my previous article I did compare measuring performance with quantum mechanics. This analogy does work surprising well. When you measure a quantum system there is a lower limit how accurately you can measure something. The Heisenberg uncertainty relation does tell us that you cannot measure of a quantum system the impulse and location of a particle at the same time with infinite accuracy. For programmers the two variables are execution time and memory allocations. If you try to measure the timings of all methods in your application you will need to store them somewhere. The fastest storage space besides the CPU cache is the memory. But if your timing values do consume all available memory there is no memory left for the actual application to run. On the other hand if you try to record all memory allocations of your application you will also need to store the data somewhere. This will cost you memory and execution time. These constraints are always there and regardless how good the marketing of tool vendors for performance and memory profilers are: Any measurement will disturb the system in a non predictable way. Commercial tool vendors will tell you they do calculate this overhead and subtract it from the measured values to give you the most accurate values but in reality it is not entirely true. After falling into the trap to trust the profiler timings several times I have got into the habit to Measure with a profiler to get an idea where potential bottlenecks are. Measure again with tracing only the specific methods to check if this method is really worth optimizing. Optimize it Measure again. Be surprised that your optimization has made things worse. Think harder Implement something that really works. Measure again Finished! - Or look for the next bottleneck. Recently I have looked into issues with serialization performance. For serialization DataContractSerializer was used and I was not sure if XML is really the most optimal wire format. After looking around I have found protobuf-net which uses Googles Protocol Buffer format which is a compact binary serialization format. What is good for Google should be good for us. A small sample app to check out performance was a matter of minutes: using ProtoBuf; using System; using System.Diagnostics; using System.IO; using System.Reflection; using System.Runtime.Serialization; [DataContract, Serializable] class Data { [DataMember(Order=1)] public int IntValue { get; set; } [DataMember(Order = 2)] public string StringValue { get; set; } [DataMember(Order = 3)] public bool IsActivated { get; set; } [DataMember(Order = 4)] public BindingFlags Flags { get; set; } } class Program { static MemoryStream _Stream = new MemoryStream(); static MemoryStream Stream { get { _Stream.Position = 0; _Stream.SetLength(0); return _Stream; } } static void Main(string[] args) { DataContractSerializer ser = new DataContractSerializer(typeof(Data)); Data data = new Data { IntValue = 100, IsActivated = true, StringValue = "Hi this is a small string value to check if serialization does work as expected" }; var sw = Stopwatch.StartNew(); int Runs = 1000 * 1000; for (int i = 0; i < Runs; i++) { //ser.WriteObject(Stream, data); Serializer.Serialize<Data>(Stream, data); } sw.Stop(); Console.WriteLine("Did take {0:N0}ms for {1:N0} objects", sw.Elapsed.TotalMilliseconds, Runs); Console.ReadLine(); } } The results are indeed promising: Serializer Time in ms N objects protobuf-net 807 1000000 DataContract 4402 1000000 Nearly a factor 5 faster and a much more compact wire format. Lets use it! After switching over to protbuf-net the transfered wire data has dropped by a factor two (good) and the performance has worsened by nearly a factor two. How is that possible? We have measured it? Protobuf-net is much faster! As it turns out protobuf-net is faster but it has a cost: For the first time a type is de/serialized it does use some very smart code-gen which does not come for free. Lets try to measure this one by setting of our performance test app the Runs value not to one million but to 1. Serializer Time in ms N objects protobuf-net 85 1 DataContract 24 1 The code-gen overhead is significant and can take up to 200ms for more complex types. The break even point where the code-gen cost is amortized by its faster serialization performance is (assuming small objects) somewhere between 20.000-40.000 serialized objects. As it turned out my specific scenario involved about 100 types and 1000 serializations in total. That explains why the good old DataContractSerializer is not so easy to take out of business. The final approach I ended up was to reduce the number of types and to serialize primitive types via BinaryWriter directly which turned out to be a pretty good alternative. It sounded good until I measured again and found that my optimizations so far do not help much. After looking more deeper at the profiling data I did found that one of the 1000 calls did take 50% of the time. So how do I find out which call it was? Normal profilers do fail short at this discipline. A (totally undeserved) relatively unknown profiler is SpeedTrace which does unlike normal profilers create traces of your applications by instrumenting your IL code at runtime. This way you can look at the full call stack of the one slow serializer call to find out if this stack was something special. Unfortunately the call stack showed nothing special. But luckily I have my own tracing as well and I could see that the slow serializer call did happen during the serialization of a bool value. When you encounter after much analysis something unreasonable you cannot explain it then the chances are good that your thread was suspended by the garbage collector. If there is a problem with excessive GCs remains to be investigated but so far the serialization performance seems to be mostly ok. When you do profile a complex system with many interconnected processes you can never be sure that the timings you just did measure are accurate at all. Some process might be hitting the disc slowing things down for all other processes for some seconds as well. There is a big difference between warm and cold startup. If you restart all processes you can basically forget the first run because of the OS disc cache, JIT and GCs make the measured timings very flexible. When you are in need of a random number generator you should measure cold startup times of a sufficiently complex system. After the first run you can try again getting different and much lower numbers. Now try again at least two times to get some feeling how stable the numbers are. Oh and try to do the same thing the next day. It might be that the bottleneck you found yesterday is gone today. Thanks to GC and other random stuff it can become pretty hard to find stuff worth optimizing if no big bottlenecks except bloatloads of code are left anymore. When I have found a spot worth optimizing I do make the code changes and do measure again to check if something has changed. If it has got slower and I am certain that my change should have made it faster I can blame the GC again. The thing is that if you optimize stuff and you allocate less objects the GC times will shift to some other location. If you are unlucky it will make your faster working code slower because you see now GCs at times where none were before. This is where the stuff does get really tricky. A safe escape hatch is to create a repro of the slow code in an isolated application so you can change things fast in a reliable manner. Then the normal profilers do also start working again. As Vance Morrison does point out it is much more complex to profile a system against the wall clock compared to optimize for CPU time. The reason is that for wall clock time analysis you need to understand how your system does work and which threads (if you have not one but perhaps 20) are causing a visible delay to the end user and which threads can wait a long time without affecting the user experience at all. Next time: Commercial profiler shootout.

Read the article

The future for Microsoft

- by Scott Dorman

Originally posted on: http://geekswithblogs.net/sdorman/archive/2013/10/16/the-future-for-microsoft.aspxMicrosoft is in the process of reinventing itself. While some may argue that it’s “too little, too late” or that their growing consumer-focused strategy is wrong, the truth of the situation is that Microsoft is reinventing itself into a new company. While Microsoft is now calling themselves a “devices and services” company, that’s not entirely accurate. Let’s look at some facts: Microsoft will always (for the long-term foreseeable future) be financially split into the following divisions: Windows/Operating Systems, which for FY13 made up approximately 24% of overall revenue. Server and Tools, which for FY13 made up approximately 26% of overall revenue. Enterprise/Business Products, which for FY13 made up approximately 32% of overall revenue. Entertainment and Devices, which for FY13 made up approximately 13% of overall revenue. Online Services, which for FY13 made up approximately 4% of overall revenue. It is important to realize that hardware products like the Surface fall under the Windows/Operating Systems division while products like the Xbox 360 fall under the Entertainment and Devices division. (Presumably other hardware, such as mice, keyboards, and cameras, also fall under the Entertainment and Devices division.) It’s also unclear where Microsoft’s recent acquisition of Nokia’s handset division will fall, but let’s assume that it will be under Entertainment and Devices as well. Now, for the sake of argument, let’s assume a slightly different structure that I think is more in line with how Microsoft presents itself and how the general public sees it: Consumer Products and Devices, which would probably make up approximately 9% of overall revenue. Developer Tools, which would probably make up approximately 13% of overall revenue. Enterprise Products and Devices, which would probably make up approximately 47% of overall revenue. Entertainment, which would probably make up approximately 13% of overall revenue. Online Services, which would probably make up approximately 17% of overall revenue. (Just so we’re clear, in this structure hardware products like the Surface, a portion of Windows sales, and other hardware fall under the Consumer Products and Devices division. I’m assuming that more of the income for the Windows division is coming from enterprise/volume licenses so 15% of that income went to the Enterprise Products and Devices division. Most of the enterprise services, like Azure, fall under the Online Services division so half of the Server and Tools income went there as well.) No matter how you look at it, the bulk of Microsoft’s income still comes from not just the enterprise but also software sales, and this really shouldn’t surprise anyone. So, now that the stage is set…what’s the future for Microsoft? The future I see for Microsoft (again, this is just my prediction based on my own instinct, gut-feel and publicly available information) is this: Microsoft is becoming a consumer-focused enterprise company. Let’s look at it a different way. Microsoft is an enterprise-focused company trying to create a larger consumer presence. To a large extent, this is the exact opposite of Apple, who is really a consumer-focused company trying to create a larger enterprise presence. The major reason consumer-focused companies (like Apple) have started making in-roads into the enterprise is the “bring your own device” phenomenon. Yes, Apple has created some “game-changing” products but their enterprise influence is still relatively small. Unfortunately (for this blog post at least), Apple provides revenue in terms of hardware products rather than business divisions, so it’s not possible to do a direct comparison. However, in the interest of transparency, from Apple’s Quarterly Report (filed 24 July 2013), their revenue breakdown is: iPhone, which for the 3 months ending 29 June 2013 made up approximately 51% of revenue. iPad, which for the 3 months ending 29 June 2013 made up approximately 18% of revenue. Mac, which for the 3 months ending 29 June 2013 made up approximately 14% of revenue. iPod, which for the 3 months ending 29 June 2013 made up approximately 2% of revenue. iTunes, Software, and Services, which for the 3 months ending 29 June 2013 made up approximately 11% of revenue. Accessories, which for the 3 months ending 29 July 2013 made up approximately 3% of revenue. From this, it’s pretty clear that Apple is a consumer-and-hardware-focused company. At this point, you may be asking yourself “Where is all of this going?” The answer to that lies in Microsoft’s shift in company focus. They are becoming more consumer focused, but what exactly does that mean? The biggest change (at least that’s been in the news lately) is the pending purchase of Nokia’s handset division. This, in combination with their Surface line of tablets and the Xbox, will put Microsoft squarely in the realm of a hardware-focused company in addition to being a software-focused company. That can (and most likely will) shift the revenue split to looking at revenue based on software sales (both consumer and enterprise) and also hardware sales (mostly on the consumer side). If we look at things strictly from a Windows perspective, Microsoft clearly has a lot of irons in the fire at the moment. Discounting the various product SKUs available and painting the picture with broader strokes, there are currently 5 different Windows-based operating systems: Windows Phone Windows Phone 7.x, which runs on top of the Windows CE kernel Windows Phone 8.x+, which runs on top of the Windows 8 kernel Windows RT The ARM-based version of Windows 8, which runs on top of the Windows 8 kernel Windows (Pro) The Intel-based version of Windows 8, which runs on top of the Windows 8 kernel Xbox The Xbox 360, which runs it’s own proprietary OS. The Xbox One, which runs it’s own proprietary OS, a version of Windows running on top of the Windows 8 kernel and a proprietary “manager” OS which manages the other two. Over time, Windows Phone 7.x devices will fade so that really leaves 4 different versions. Looking at Windows RT and Windows Phone 8.x paints an interesting story. Right now, all mobile phone devices run on some sort of ARM chip and that doesn’t look like it will change any time soon. That means Microsoft has two different Windows based operating systems for the ARM platform. Long term, it doesn’t make sense for Microsoft to continue supporting that arrangement. I have long suspected (since the Surface was first announced) that Microsoft will unify these two variants of Windows and recent speculation from some of the leading Microsoft watchers lends credence to this suspicion. It is rumored that upcoming Windows Phone releases will include support for larger screen sizes, relax the requirement to have a hardware-based back button and will continue to improve API parity between Windows Phone and Windows RT. At the same time, Windows RT will include support for smaller screen sizes. Since both of these operating systems are based on the same core Windows kernel, it makes sense (both from a financial and development resource perspective) for Microsoft to unify them. The user interfaces are already very similar. So similar in fact, that visually it’s difficult to tell them apart. To illustrate this, here are two screen captures: Other than a few variations (the Bing News app, the picture shown in the Pictures tile and the spacing between the tiles) these are identical. The one on the left is from my Windows 8.1 laptop (which looks the same as on my Surface RT) and the one on the right is from my Windows Phone 8 Lumia 925. This pretty clearly shows that from a consumer perspective, there really is no practical difference between how these two operating systems look and how you interact with them. For the consumer, your entertainment device (Xbox One), phone (Windows Phone) and mobile computing device (Surface [or some other vendors tablet], laptop, netbook or ultrabook) and your desktop computing device (desktop) will all look and feel the same. While many people will denounce this consistency of user experience, I think this will be a good thing in the long term, especially for the upcoming generations. For example, my 5-year old son knows how to use my tablet, phone and Xbox because they all feature nearly identical user experiences. When Windows 8 was released, Microsoft allowed a Windows Store app to be purchased once and installed on as many as 5 devices. With Windows 8.1, this limit has been increased to over 50. Why is that important? If you consider that your phone, computing devices, and entertainment device will be running the same operating system (with minor differences related to physical hardware chipset), that means that I could potentially purchase my sons favorite Angry Birds game once and be able to install it on all of the devices I own. (And for those of you wondering, it’s only 7 [at the moment].) From an app developer perspective, the story becomes even more compelling. Right now there are differences between the different operating systems, but those differences are shrinking. The user interface technology for both is XAML but there are different controls available and different user experience concepts. Some of the APIs available are the same while some are not. You can’t develop a Windows Phone app that can also run on Windows (either Windows Pro or RT). With each release of Windows Phone and Windows RT, those difference become smaller and smaller. Add to this mix the Xbox One, which will also feature a Windows-based operating system and the same “modern” (tile-based) user interface and the visible distinctions between the operating systems will become even smaller. Unifying the operating systems means one set of APIs and one code base to maintain for an app that can run on multiple devices. One code base means it’s easier to add features and fix bugs and that those changes become available on all devices at the same time. It also means a single app store, which will increase the discoverability and reach of your app and consolidate revenue and app profile management. Now, the choice of what devices an app is available on becomes a simple checkbox decision rather than a technical limitation. Ultimately, this means more apps available to consumers, which is always good for the app ecosystem. Is all of this just rumor, speculation and conjecture? Of course, but it’s not unfounded. As I mentioned earlier, some of the prominent Microsoft watchers are also reporting similar rumors. However, Microsoft itself has even hinted at this future with their recent organizational changes and by telling developers “if you want to develop for Xbox One, start developing for Windows 8 now.” I think this pretty clearly paints the following picture: Microsoft is committed to the “modern” user interface paradigm. Microsoft is changing their release cadence (for all products, not just operating systems) to be faster and more modular. Microsoft is going to continue to unify their OS platforms both from a consumer perspective and a developer perspective. While this direction will certainly concern some people it will excite many others. Microsoft’s biggest failing has always been following through with a strong and sustained marketing strategy that presents a consistent view point and highlights what this unified and connected experience looks like and how it benefits consumers and enterprises. We’ve started to see some of this over the last few years, but it needs to continue and become more aggressive and consistent. In the long run, I think Microsoft will be able to pull all of these technologies and devices together into one seamless ecosystem. It isn’t going to happen overnight, but my prediction is that we will be there by the end of 2016. As both a consumer and a developer, I, for one, am excited about the future of Microsoft.

Read the article

Adding an Admin user to an ASP.NET MVC 4 application using a single drop-in file

- by Jon Galloway

I'm working on an ASP.NET MVC 4 tutorial and wanted to set it up so just dropping a file in App_Start would create a user named "Owner" and assign them to the "Administrator" role (more explanation at the end if you're interested). There are reasons why this wouldn't fit into most application scenarios: It's not efficient, as it checks for (and creates, if necessary) the user every time the app starts up The username, password, and role name are hardcoded in the app (although they could be pulled from config) Automatically creating an administrative account in code (without user interaction) could lead to obvious security issues if the user isn't informed However, with some modifications it might be more broadly useful - e.g. creating a test user with limited privileges, ensuring a required account isn't accidentally deleted, or - as in my case - setting up an account for demonstration or tutorial purposes. Challenge #1: Running on startup without requiring the user to install or configure anything I wanted to see if this could be done just by having the user drop a file into the App_Start folder and go. No copying code into Global.asax.cs, no installing addition NuGet packages, etc. That may not be the best approach - perhaps a NuGet package with a dependency on WebActivator would be better - but I wanted to see if this was possible and see if it offered the best experience. Fortunately ASP.NET 4 and later provide a PreApplicationStartMethod attribute which allows you to register a method which will run when the application starts up. You drop this attribute in your application and give it two parameters: a method name and the type that contains it. I created a static class named PreApplicationTasks with a static method named, then dropped this attribute in it: [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] That's it. One small gotcha: the namespace can be a problem with assembly attributes. I decided my class didn't need a namespace. Challenge #2: Only one PreApplicationStartMethod per assembly In .NET 4, the PreApplicationStartMethod is marked as AllMultiple=false, so you can only have one PreApplicationStartMethod per assembly. This was fixed in .NET 4.5, as noted by Jon Skeet, so you can have as many PreApplicationStartMethods as you want (allowing you to keep your users waiting for the application to start indefinitely!). The WebActivator NuGet package solves the multiple instance problem if you're in .NET 4 - it registers as a PreApplicationStartMethod, then calls any methods you've indicated using [assembly: WebActivator.PreApplicationStartMethod(type, method)]. David Ebbo blogged about that here: Light up your NuGets with startup code and WebActivator. In my scenario (bootstrapping a beginner level tutorial) I decided not to worry about this and stick with PreApplicationStartMethod. Challenge #3: PreApplicationStartMethod kicks in before configuration has been read This is by design, as Phil explains. It allows you to make changes that need to happen very early in the pipeline, well before Application_Start. That's fine in some cases, but it caused me problems when trying to add users, since the Membership Provider configuration hadn't yet been read - I got an exception stating that "Default Membership Provider could not be found." The solution here is to run code that requires configuration in a PostApplicationStart method. But how to do that? Challenge #4: Getting PostApplicationStartMethod without requiring WebActivator The WebActivator NuGet package, among other things, provides a PostApplicationStartMethod attribute. That's generally how I'd recommend running code that needs to happen after Application_Start: [assembly: WebActivator.PostApplicationStartMethod(typeof(TestLibrary.MyStartupCode), "CallMeAfterAppStart")] This works well, but I wanted to see if this would be possible without WebActivator. Hmm. Well, wait a minute - WebActivator works in .NET 4, so clearly it's registering and calling PostApplicationStartup tasks somehow. Off to the source code! Sure enough, there's even a handy comment in ActivationManager.cs which shows where PostApplicationStartup tasks are being registered: public static void Run() { if (!_hasInited) { RunPreStartMethods(); // Register our module to handle any Post Start methods. But outside of ASP.NET, just run them now if (HostingEnvironment.IsHosted) { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility.RegisterModule(typeof(StartMethodCallingModule)); } else { RunPostStartMethods(); } _hasInited = true; } } Excellent. Hey, that DynamicModuleUtility seems familiar... Sure enough, K. Scott Allen mentioned it on his blog last year. This is really slick - a PreApplicationStartMethod can register a new HttpModule in code. Modules are run right after application startup, so that's a perfect time to do any startup stuff that requires configuration to be read. As K. Scott says, it's this easy: using System; using System.Web; using Microsoft.Web.Infrastructure.DynamicModuleHelper; [assembly:PreApplicationStartMethod(typeof(MyAppStart), "Start")] public class CoolModule : IHttpModule { // implementation not important // imagine something cool here } public static class MyAppStart { public static void Start() { DynamicModuleUtility.RegisterModule(typeof(CoolModule)); } } Challenge #5: Cooperating with SimpleMembership The ASP.NET MVC Internet template includes SimpleMembership. SimpleMembership is a big improvement over traditional ASP.NET Membership. For one thing, rather than forcing a database schema, it can work with your database schema. In the MVC 4 Internet template case, it uses Entity Framework Code First to define the user model. SimpleMembership bootstrap includes a call to InitializeDatabaseConnection, and I want to play nice with that. There's a new [InitializeSimpleMembership] attribute on the AccountController, which calls \Filters\InitializeSimpleMembershipAttribute.cs::OnActionExecuting(). That comment in that method that says "Ensure ASP.NET Simple Membership is initialized only once per app start" which sounds like good advice. I figured the best thing would be to call that directly: new Mvc4SampleApplication.Filters.InitializeSimpleMembershipAttribute().OnActionExecuting(null); I'm not 100% happy with this - in fact, it's my least favorite part of this solution. There are two problems - first, directly calling a method on a filter, while legal, seems odd. Worse, though, the Filter lives in the application's namespace, which means that this code no longer works well as a generic drop-in. The simplest workaround would be to duplicate the relevant SimpleMembership initialization code into my startup code, but I'd rather not. I'm interested in your suggestions here. Challenge #6: Module Init methods are called more than once When debugging, I noticed (and remembered) that the Init method may be called more than once per page request - it's run once per instance in the app pool, and an individual page request can cause multiple resource requests to the server. While SimpleMembership does have internal checks to prevent duplicate user or role entries, I'd rather not cause or handle those exceptions. So here's the standard single-use lock in the Module's init method: void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { //Do stuff } initialized = true; } } Putting it all together With all of that out of the way, here's the code I came up with: using Mvc4SampleApplication.Filters; using System.Web; using System.Web.Security; using WebMatrix.WebData; [assembly: PreApplicationStartMethod(typeof(PreApplicationTasks), "Initializer")] public static class PreApplicationTasks { public static void Initializer() { Microsoft.Web.Infrastructure.DynamicModuleHelper.DynamicModuleUtility .RegisterModule(typeof(UserInitializationModule)); } } public class UserInitializationModule : IHttpModule { private static bool initialized; private static object lockObject = new object(); private const string _username = "Owner"; private const string _password = "p@ssword123"; private const string _role = "Administrator"; void IHttpModule.Init(HttpApplication context) { lock (lockObject) { if (!initialized) { new InitializeSimpleMembershipAttribute().OnActionExecuting(null); if (!WebSecurity.UserExists(_username)) WebSecurity.CreateUserAndAccount(_username, _password); if (!Roles.RoleExists(_role)) Roles.CreateRole(_role); if (!Roles.IsUserInRole(_username, _role)) Roles.AddUserToRole(_username, _role); } initialized = true; } } void IHttpModule.Dispose() { } } The Verdict: Is this a good thing? Maybe. I think you'll agree that the journey was undoubtedly worthwhile, as it took us through some of the finer points of hooking into application startup, integrating with membership, and understanding why the WebActivator NuGet package is so useful Will I use this in the tutorial? I'm leaning towards no - I think a NuGet package with a dependency on WebActivator might work better: It's a little more clear what's going on Installing a NuGet package might be a little less error prone than copying a file A novice user could uninstall the package when complete It's a good introduction to NuGet, which is a good thing for beginners to see This code either requires either duplicating a little code from that filter or modifying the file to use the namespace Honestly I'm undecided at this point, but I'm glad that I can weigh the options. If you're interested: Why are you doing this? I'm updating the MVC Music Store tutorial to ASP.NET MVC 4, taking advantage of a lot of new ASP.NET MVC 4 features and trying to simplify areas that are giving people trouble. One change that addresses both needs us using the new OAuth support for membership as much as possible - it's a great new feature from an application perspective, and we get a fair amount of beginners struggling with setting up membership on a variety of database and development setups, which is a distraction from the focus of the tutorial - learning ASP.NET MVC. Side note: Thanks to some great help from Rick Anderson, we had a draft of the tutorial that was looking pretty good earlier this summer, but there were enough changes in ASP.NET MVC 4 all the way up to RTM that there's still some work to be done. It's high priority and should be out very soon. The one issue I ran into with OAuth is that we still need an Administrative user who can edit the store's inventory. I thought about a number of solutions for that - making the first user to register the admin, or the first user to use the username "Administrator" is assigned to the Administrator role - but they both ended up requiring extra code; also, I worried that people would use that code without understanding it or thinking about whether it was a good fit.

Read the article

Investigation: Can different combinations of components effect Dataflow performance?

- by jamiet

Introduction The Dataflow task is one of the core components (if not the core component) of SQL Server Integration Services (SSIS) and often the most misunderstood. This is not surprising, its an incredibly complicated beast and we’re abstracted away from that complexity via some boxes that go yellow red or green and that have some lines drawn between them. Example dataflow In this blog post I intend to look under that facade and get into some of the nuts and bolts of the Dataflow Task by investigating how the decisions we make when building our packages can affect performance. I will do this by comparing the performance of three dataflows that all have the same input, all produce the same output, but which all operate slightly differently by way of having different transformation components. I also want to use this blog post to challenge a common held opinion that I see perpetuated over and over again on the SSIS forum. That is, that people assume adding components to a dataflow will be detrimental to overall performance. Its not surprising that people think this –it is intuitive to think that more components means more work- however this is not a view that I share. I have always been of the opinion that there are many factors affecting dataflow duration and the number of components is actually one of the less important ones; having said that I have never proven that assertion and that is one reason for this investigation. I have actually seen evidence that some people think dataflow duration is simply a function of number of rows and number of components. I’ll happily call that one out as a myth even without any investigation! The Setup I have a 2GB datafile which is a list of 4731904 (~4.7million) customer records with various attributes against them and it contains 2 columns that I am going to use for categorisation: [YearlyIncome] [BirthDate] The data file is a SSIS raw format file which I chose to use because it is the quickest way of getting data into a dataflow and given that I am testing the transformations, not the source or destination adapters, I want to minimise external influences as much as possible. In the test I will split the customers according to month of birth (12 of those) and whether or not their yearly income is above or below 50000 (2 of those); in other words I will be splitting them into 24 discrete categories and in order to do it I shall be using different combinations of SSIS’ Conditional Split and Derived Column transformation components. The 24 datapaths that occur will each input to a rowcount component, again because this is the least resource intensive means of terminating a datapath. The test is being carried out on a Dell XPS Studio laptop with a quad core (8 logical Procs) Intel Core i7 at 1.73GHz and Samsung SSD hard drive. Its running SQL Server 2008 R2 on Windows 7. The Variables Here are the three combinations of components that I am going to test: One Conditional Split - A single Conditional Split component CSPL Split by Month of Birth and income category that will use expressions on [YearlyIncome] & [BirthDate] to send each row to one of 24 outputs. This next screenshot displays the expression logic in use: Derived Column & Conditional Split - A Derived Column component DER Income Category that adds a new column [IncomeCategory] which will contain one of two possible text values {“LessThan50000”,”GreaterThan50000”} and uses [YearlyIncome] to determine which value each row should get. A Conditional Split component CSPL Split by Month of Birth and Income Category then uses that new column in conjunction with [BirthDate] to determine which of the same 24 outputs to send each row to. Put more simply, I am separating the Conditional Split of #1 into a Derived Column and a Conditional Split. The next screenshots display the expression logic in use: DER Income Category CSPL Split by Month of Birth and Income Category Three Conditional Splits - A Conditional Split component that produces two outputs based on [YearlyIncome], one for each Income Category. Each of those outputs will go to a further Conditional Split that splits the input into 12 outputs, one for each month of birth (identical logic in each). In this case then I am separating the single Conditional Split of #1 into three Conditional Split components. The next screenshots display the expression logic in use: CSPL Split by Income Category CSPL Split by Month of Birth 1& 2 Each of these combinations will provide an input to one of the 24 rowcount components, just the same as before. For illustration here is a screenshot of the dataflow containing three Conditional Split components: As you can these dataflows have a fair bit of work to do and remember that they’re doing that work for 4.7million rows. I will execute each dataflow 10 times and use the average for comparison. I foresee three possible outcomes: The dataflow containing just one Conditional Split (i.e. #1) will be quicker There is no significant difference between any of them One of the two dataflows containing multiple transformation components will be quicker Regardless of which of those outcomes come to pass we will have learnt something and that makes this an interesting test to carry out. Note that I will be executing the dataflows using dtexec.exe rather than hitting F5 within BIDS. The Results and Analysis The table below shows all of the executions, 10 for each dataflow. It also shows the average for each along with a standard deviation. All durations are in seconds. I’m pasting a screenshot because I frankly can’t be bothered with the faffing about needed to make a presentable HTML table. It is plain to see from the average that the dataflow containing three conditional splits is significantly faster, the other two taking 43% and 52% longer respectively. This seems strange though, right? Why does the dataflow containing the most components outperform the other two by such a big margin? The answer is actually quite logical when you put some thought into it and I’ll explain that below. Before progressing, a side note. The standard deviation for the “Three Conditional Splits” dataflow is orders of magnitude smaller – indicating that performance for this dataflow can be predicted with much greater confidence too. The Explanation I refer you to the screenshot above that shows how CSPL Split by Month of Birth and salary category in the first dataflow is setup. Observe that there is a case for each combination of Month Of Date and Income Category – 24 in total. These expressions get evaluated in the order that they appear and hence if we assume that Month of Date and Income Category are uniformly distributed in the dataset we can deduce that the expected number of expression evaluations for each row is 12.5 i.e. 1 (the minimum) + 24 (the maximum) divided by 2 = 12.5. Now take a look at the screenshots for the second dataflow. We are doing one expression evaluation in DER Income Category and we have the same 24 cases in CSPL Split by Month of Birth and Income Category as we had before, only the expression differs slightly. In this case then we have 1 + 12.5 = 13.5 expected evaluations for each row – that would account for the slightly longer average execution time for this dataflow. Now onto the third dataflow, the quick one. CSPL Split by Income Category does a maximum of 2 expression evaluations thus the expected number of evaluations per row is 1.5. CSPL Split by Month of Birth 1 & CSPL Split by Month of Birth 2 both have less work to do than the previous Conditional Split components because they only have 12 cases to test for thus the expected number of expression evaluations is 6.5 There are two of them so total expected number of expression evaluations for this dataflow is 6.5 + 6.5 + 1.5 = 14.5. 14.5 is still more than 12.5 & 13.5 though so why is the third dataflow so much quicker? Simple, the conditional expressions in the first two dataflows have two boolean predicates to evaluate – one for Income Category and one for Month of Birth; the expressions in the Conditional Split in the third dataflow however only have one predicate thus they are doing a lot less work. To sum up, the difference in execution times can be attributed to the difference between: MONTH(BirthDate) == 1 && YearlyIncome <= 50000 and MONTH(BirthDate) == 1 In the first two dataflows YearlyIncome <= 50000 gets evaluated an average of 12.5 times for every row whereas in the third dataflow it is evaluated once and once only. Multiply those 11.5 extra operations by 4.7million rows and you get a significant amount of extra CPU cycles – that’s where our duration difference comes from. The Wrap-up The obvious point here is that adding new components to a dataflow isn’t necessarily going to make it go any slower, moreover you may be able to achieve significant improvements by splitting logic over multiple components rather than one. Performance tuning is all about reducing the amount of work that needs to be done and that doesn’t necessarily mean use less components, indeed sometimes you may be able to reduce workload in ways that aren’t immediately obvious as I think I have proven here. Of course there are many variables in play here and your mileage will most definitely vary. I encourage you to download the package and see if you get similar results – let me know in the comments. The package contains all three dataflows plus a fourth dataflow that will create the 2GB raw file for you (you will also need the [AdventureWorksDW2008] sample database from which to source the data); simply disable all dataflows except the one you want to test before executing the package and remember, execute using dtexec, not within BIDS. If you want to explore dataflow performance tuning in more detail then here are some links you might want to check out: Inequality joins, Asynchronous transformations and Lookups Destination Adapter Comparison Don’t turn the dataflow into a cursor SSIS Dataflow – Designing for performance (webinar) Any comments? Let me know! @Jamiet

Read the article

CodePlex Daily Summary for Sunday, November 27, 2011

CodePlex Daily Summary for Sunday, November 27, 2011Popular ReleasesTerminals: Version 2 - Beta 4 Release: Beta 4 Refresh Build Dont forget to backup your config files BEFORE upgrading! As usual, please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Updated the About form to include the date and time of the build. Useful for CI builds to ensure we have the correct version "Favourites" and "History" save their expanded states after app restarts Code cleanup, secu...MiniTwitter: 1.76: MiniTwitter 1.76 ???? ?? ?????????? User Streams ???????????? User Streams ???????????、??????????????? REST ?????????? ?????????????????????????????? ??????????????????????????????Media Companion: MC 3.424b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movie Show Resolutions... Resolved issue when reverting multiselection of movies to "-none-" Added movie rename support for subtitle files '.srt' & '.sub' Finalised code for '-1' fix - radiobutton to choose either filename or title Fixed issue with Movie Batch Wizard Fanart - ...Advanced Windows Phone Enginering Tool: WPE Downloads: This version of WPE gives you basic updating, restoring, and, erasing for your Windows Phone device.Anno 2070 Assistant: Beta v1.0 (STABLE): Anno 2070 Assistant Beta v1.0 Released! Features Included: Complete Building Layouts for Ecos, Tycoons & Techs Complete Production Chains for Ecos, Tycoons & Techs Completed Credits Screen Known Issues: Not all production chains and building layouts may be on the lists because they have not yet been discovered. However, data is still 99.9% complete. Currently the Supply & Demand, including Calculator screen are disabled until version 1.1.Minemapper: Minemapper v0.1.7: Including updated Minecraft Biome Extractor and mcmap to support the new Minecraft 1.0.0 release (new block types, etc).Visual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.10: 3.6.0.10 22-Nov-2011 Update: Removed PreEmptive Platform integration (PreEmptive analytics) Removed all PreEmptive attributes Removed PreEmptive.dll assembly references from all projects Added first support to ADAM/AD LDS Thanks to PatBea. Work Item 9775: http://netsqlazman.codeplex.com/workitem/9775VideoLan DotNet for WinForm, WPF & Silverlight 5: VideoLan DotNet for WinForm, WPF, SL5 - 2011.11.22: The new version contains Silverlight 5 library: Vlc.DotNet.Silverlight. A sample could be tested here The new version add and correct many features : Correction : Reinitialize some variables Deprecate : Logging API, since VLC 1.2 (08/20/2011) Add subitem in LocationMedia (for Youtube videos, ...) Update Wpf sample to use Youtube videos Many others correctionsEZ-NFC: Alpha 1: THIS IS AN ALPHA RELEASE. STILL UNSTABLE AND SUBJECT TO ARCHITECTURE CHANGE What is implemented (In alpha) : ACR122L Device Mifare 1K tag Windows frontend#liveDB: liveDB 0.3.2: New featuresNew abstract storage scheme enabling future cloud support New file system structure and naming scheme for snapshots and journal files based on sequence numbers Journal files are never deleted Automatic snapshots during load or shutdown Renamed/added hooks to Model JournalRestored, SnapshotRestored Created an extensible logging facade Journal gets split into 1MB segments (configurable) Integrity checks before during load/create Commands are cloned by default before ...ReactiveMVVM: ReactiveMVVM v1.0: Example 1 property change: public class Example1 : ViewModelBase{ string _Userid; /// <summary> /// person infomation of owner. /// </summary> public string Userid { get { return _Userid; } set { this.RaiseAndSetIfChanged(x => x.Userid, ref _Userid, value, *true*); } // true, broadcast property change message. } //if the property changed to do...... this.ObservableProperty(x => x.Useid) ...IoCWrap: Initial: Initial release of the source code.Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LinqPad Custom Visualizer Version 1.0: First release of my LinqPad Custom Visualizer. It is compiled against the Any-CPU build of LINQPad v4.36.6 so it can only be used with the LINQPad Beta: v4.36.x. To install unzip to the LinqPad plugins folder.Distributed replay GUI: Distributed Replay Snapin: This is the dll for registering the snapin in mmc.FaST-LMM: FActored Spectrally Transformed Linear Mixed Models: FaSTLMM v1.03 Binaries for Windows and Linux: These files contain the files necessary to run FaSTLMM on Windows or Linux along with the license and users manual. To download FaSTLMM source code, please follow the changeset link located above to the Source Code tab. The FaSTLMM.Win.zip download contains both C++ and CSharp executable versions of FaSTLMM. No installer is required, just UnZip the file into a directory and run from there. Or put the installation directory on your path and run it from anywhere. The C++ version included r...SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...SharePoint 2010 Education Demo Project: Release SharePoint SP1 for Education Solutions: This release includes updates to the Content Packs for SharePoint SP1. All Content Packs have been updated to install successfully under SharePoint SP1SQL Monitor - managing sql server performance: SQLMon 4.1 alpha 6: 1. improved support for schema 2. added find reference when right click on object list 3. added object rename supportBugNET Issue Tracker: BugNET 0.9.126: First stable release of version 0.9. Upgrades from 0.8 are fully supported and upgrades to future releases will also be supported. This release is now compiled against the .NET 4.0 framework and is a requirement. Because of this the web.config has significantly changed. After upgrading, you will need to configure the authentication settings for user registration and anonymous access again. Please see our installation / upgrade instructions for more details: http://wiki.bugnetproject.c...New Projectsandrewtatham.robocode: Andrew Tatham's Robocode botsClear SharePoint Lists: This project contains the tools used to clear the items from the one or more Lists.Clipboard Editor: How many times have you pasted something in Notepad and then copied the plain text again? We do it all the time to strip formatting from the clipboard. This utility lets you pick which format from the clipboard to keep.CS New Rus: ?? ????? ??????????? ??????. ??? ??? - CS New. ?? ???? ????? ?? ????? ??????????? ??? ? ?????????? ? ???????. ElfDoc: ElfDoc enables you to create word documents from templates, using open xml.HTC RUU .NET: HTC's legendary RUU goes .NET and Open Source.................. You can browse for .nbh file, not locked at current directory and, you can update your device's rom in .NET wayMobileGamePrototype: For now just a skeleton of the architecture.NopCommerce 23 Multi Store Support: NopCommerce 23 Multi Store Support novel: fetch novelOrchard Custom Shapes: Ready to use custom orchard shapes like a table shape.Philosophy Gadget: This gadget helps people associate known works of philosophy with their known authors.ReefTracker: A controller agnostic logging and reporting application for reef aquarium controllers. SQLQuery: SQL QueryWindows Phone Marketplace Viewer: Windows Phone Marketplace Viewer is a single aspx page for asp.net 3+ with no additional dependencies. It will show the top 2000 apps in one of the 3 categories: paid and free together, only paid or only free, for all the marketplace languages.

Read the article

Using rounded corners in modern websites with CSS3

- by nikolaosk

This is going to be the sixth post in a series of posts regarding HTML 5. You can find the other posts here , here, here , here and here.In this post I will provide a hands-on example on how to use rounded corners (rounded corners in CSS3) in your website. I think this is the feature that is most required in the new modern websites.Most websites look great with their lovely round panels and rounded corner tab style menus. We could achieve that effect earlier but we should resort to complex CSS rules and images. I will show you how to accomplish this great feature with the power of CSS 3.We will not use Javascript.Javascript is required for IE 7, IE 8 and the notorious IE 6. The best solution for implementing corners using CSS and Javascript without using images is Nifty corners cube. There are detailed information how to achieve this in the link I provided. This solution is tested in earlier vesrions of IE (IE 6,IE 7,IE 8) and Opera,Firefox,Safari. In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.Before I go on with the actual demo I will use the (http://www.caniuse.com) to see the support for web fonts from the latest versions of modern browsers.Please have a look at the picture below. We see that all the latest versions of modern browsers support this feature.We can see that even IE 9 supports this feature. Let's move on with the actual demo. This is going to be a rather simple demo.I create a simple HTML 5 page. The markup follows and it is very easy to use and understand <!DOCTYPE html><html lang="en"> <head> <title>HTML 5, CSS3 and JQuery</title> <meta http-equiv="Content-Type" content="text/html;charset=utf-8" > <link rel="stylesheet" type="text/css" href="style.css"> </head> <body> <div id="header"> <h1>Learn cutting edge technologies</h1> </div> <div id="main"> <h2>HTML 5</h2> <p id="panel1"> HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML. </p> </div> </body> </html>Then I need to write the various CSS rules that style this markup. I will name it style.css body{ line-height: 38px; width: 1024px; background-color:#eee; text-align:center; }#panel1 { margin:auto; text-align:left; background-color:#77cdef;width:400px; height:250px; padding:15px;font-size:16px;font-family:tahoma;color:#fff;border-radius: 20px;}Have a look below to see what my page looks like in IE 10. This is possible through the border-radious property. The colored panel has all four corners rounded with the same radius.We can add a border to the rounded corner panel by adding this property declaration in the #panel1, border:4px #000 solid;We can have even better visual effects if we specify a radius for each corner.This is the updated version of the style.css. body{ line-height: 38px; width: 1024px; background-color:#eee; text-align:center; }#panel1 { margin:auto; text-align:left; background-color:#77cdef;border:4px #000 solid;width:400px; height:250px; padding:15px;font-size:16px;font-family:tahoma;color:#fff;border-top-left-radius: 20px;border-top-right-radius: 70px;border-bottom-right-radius: 20px;border-bottom-left-radius: 70px;} This is how my page looks in Firefox 15.0.1 In this final example I will show you how to style with CSS 3 (rounded corners) a horizontal navigation menu. This is the new version of the HTML markup<!DOCTYPE html><html lang="en"> <head> <title>HTML 5, CSS3 and JQuery</title> <meta http-equiv="Content-Type" content="text/html;charset=utf-8" > <link rel="stylesheet" type="text/css" href="style.css"> </head> <body> <div id="header"> <h1>Learn cutting edge technologies</h1> </div> <div id="nav"><ul><li><a class="mymenu" id="activelink" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">Main</a></li><li><a class="mymenu" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">HTML 5</a></li><li><a class="mymenu" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">CSS 3</a></li><li><a class="mymenu" href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8934038#">JQuery</a></li></ul></div> <div id="main"> <h2>HTML 5</h2> <p id="panel1"> HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML. </p> </div> </body> </html> This is the updated version of style.css body{ line-height: 38px; width: 1024px; background-color:#eee; text-align:center; }#panel1 { margin:auto; text-align:left; background-color:#77cdef;border:4px #000 solid;width:400px; height:250px; padding:15px;font-size:16px;font-family:tahoma;color:#fff;border-top-left-radius: 20px;border-top-right-radius: 70px;border-bottom-right-radius: 20px;border-bottom-left-radius: 70px;}#nav ul {width:900px; position:relative;top:24px;}ul li { text-decoration:none; display:inline;}ul li a.mymenu { font-family:Tahoma; color:black; font-size:14px;font-weight:bold;background-color:#77cdef; color:#fff;border-top-left-radius:18px; border-top-right-radius:18px; border:1px solid black; padding:15px; padding-bottom:10px;margin :2px; text-decoration:none; border-bottom:none;}.mymenu:hover { background-color:#e3781a; color:black;} The CSS rules are the classic rules that are extensively used for styling menus.The border-radius property is still responsible for the rounded corners in the menu.This is how my page looks in Chrome version 21. Hope it helps!!!

Read the article

Glassfish alive or dead? WebLogic SE cost is less than Glassfish!

- by JuergenKress

Is a hot discussion in the community in the last few days! Send us your opinion on tiwtter @wlscommunity #Glassfish #WebLogicCommunity We posted theGlassFishStrategy.pptx at our WebLogic Community Workspace (WebLogic Community membership required). Please read also the Java EE and GlassFish Server Roadmap Update Bruno Borges ?Another great article covering story about #GlassFish. Comments starting to be reasonable ;-) 6 facts helped a lot http://adtmag.com/articles/2013/11/08/oracle-drops-glassfish.aspx … Adam Bien ?What Oracle Could Do For GlassFish Now: Move the sources to GitHub (GitHub is the most popular collaboration p... http://bit.ly/1d1uo24 JAXenter.com ?Oracle evangelist: “GlassFish Open Source Edition is not dead” http://jaxenter.com/oracle-evangelist-glassfish-open-source-edition-is-not-dead-48830.html … GlassFish 6 Facts About #GlassFish Announcement and the Future of #JavaEE http://bit.ly/1bbSVPf via @brunoborges David Blevins ?In support of our #GlassFish friends and open source in general: Feed the Fish http://www.tomitribe.com/blog/2013/11/feed-the-fish/ … #JavaEE #opensource #manifesto GlassFish ?GlassFish Server Open Source Edition 4.1 is scheduled for 2014. Version 5.0 as impl for #JavaEE8 https://blogs.oracle.com/theaquarium/entry/java_ee_and_glassfish_server … #Community focused C2B2 Consulting ?C2B2 continues to offer support for your operational #JEE applications running on #GlassFish http://blog.c2b2.co.uk/2013/11/oracle-dropping-commercial-support-of.html … #Java Markus Eisele ?RT @InfoQ: #GlassFish Commercial Edition is Dead http://bit.ly/17eFB0Z < at least they agree to my points... Adam Bien suggests: Move the sources to GitHub (GitHub is the most popular collaboration platform). It is more likely for an individual to contribute via GitHub, than the current infrastructure. Introduce a business friendlier license like e.g. the Apache license. Companies interesting in providing added value (and commercial support) on top of existing sources would appreciate it. Implement GitHub-based, open source, CI system with nightly builds. Introduce a transparent voting process / pull-request acceptance process. Release more frequently. Keep https://glassfish.java.net as the main hub. C2B2 offers Glassfish support by Steve Millidge Oracle have just announced that commercial support for GlassFish 4 will not be available from Oracle. In light of this announcement I thought I would put together some thoughts about how I see this development. I think the key word in this announcement is "commercial", nowhere does Oracle announce the "death of GlassFish" in contrary Oracle reaffirm; GlassFish Server Open Source Edition continues to be the strategic foundation for Java EE reference implementation going forward. And for developers, updates will be delivered as needed to continue to deliver a great developer experience for GlassFish Server Open Source Edition so GlassFish is not about to go away soon. In a similar fashion RedHat do not provide commercial support for WildFly and only provide commercial support for JBoss EAP. Admittedly JBoss EAP and WildFly are much closer together than GlassFish and WebLogic but WildFly and JBoss EAP are absolutely NOT the same thing. The key going forward to the viability of GlassFish as a production platform is how the GlassFish community develops; How often does the community release binary builds? How open is the community to bug fixes? How much engineering resource does Oracle commit to GlassFish? At this stage we just don't know the answers to these questions. If the GlassFish open source project continues on it's current trajectory without a commercial support offering then I don't see much of a problem. Oracle just have to work harder to sell migration paths to WebLogic in the same way as RedHat have to sell migration paths from WildFly to JBoss EAP. In the meantime C2B2 continues to offer support for your operational JEE applications running on GlassFish and we will endeavour to work with the community to get any bugs fixed. The key difference is we can no longer back our Expert Support with a support contract from Oracle for patches and fixes for any release greater than 3.x. Read the complete article here. 6 Facts About GlassFish Announcement By Bruno.Borges Fact #1 - GlassFish Open Source Edition is not dead GlassFish Server Open Source Edition will remain the reference implementation of Java EE. The current trunk is where an implementation for Java EE 8 will flourish, and this will become the future GlassFish 5.0. Calling "GlassFish is dead" does no good to the Java EE ecosystem. The GlassFish Community will remain strong towards the future of Java EE. Without revenue-focused mind, this might actually help the GlassFish community to shape the next version, and set free from any ties with commercial decisions. Fact #2 - OGS support is not over As I said before, GlassFish Server Open Source Edition will continue. Main change is that there will be no more future commercial releases of Oracle GlassFish Server. New and existing OGS 2.1.x and 3.1.x commercial customers will continue to be supported according to the Oracle Lifetime Support Policy. In parallel, I believe there's no other company in the Java EE business that offers commercial support to more than one build of a Java EE application server. This new direction can actually help customers and partners, simplifying decision through commercial negotiations. Fact #3 - WebLogic is not always more expensive than OGS Oracle GlassFish Server ("OGS") is a build of GlassFish Server Open Source Edition bundled with a set of commercial features called GlassFish Server Control and license bundles such as Java SE Support. OGS has at the moment of this writing the pricelist of U$ 5,000 / processor. One information that some bloggers are mentioning is that WebLogic is more expensive than this. Fact 3.1: it is not necessarily the case. The initial edition of WebLogic is called "Standard Edition" and falls into a policy where some “Standard Edition” products are licensed on a per socket basis. As of current pricelist, US$ 10,000 / socket. If you do the math, you will realize that WebLogic SE can actually be significantly more cost effective than OGS, and a customer can save money if running on a CPU with 4 cores or more for example. Quote from the price list: “When licensing Oracle programs with Standard Edition One or Standard Edition in the product name (with the exception of Java SE Support, Java SE Advanced, and Java SE Suite), a processor is counted equivalent to an occupied socket; however, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.” For more details speak to your Oracle sales representative - this is clearly at list price and every customer typically has a relationship with Oracle (like they do with other vendors) and different contractual details may apply. And although OGS has always been production-ready for Java EE applications, it is no secret that WebLogic has always been more enterprise, mission critical application server than OGS since BEA. Different editions of WLS provide features and upgrade irons like the WebLogic Diagnostic Framework, Work Managers, Side by Side Deployment, ADF and TopLink bundled license, Web Tier (Oracle HTTP Server) bundled licensed, Fusion Middleware stack support, Oracle DB integration features, Oracle RAC features (such as GridLink), Coherence Management capabilities, Advanced HA (Whole Service Migration and Server Migration), Java Mission Control, Flight Recorder, Oracle JDK support, etc. Fact #4 - There’s no major vendor supporting community builds of Java EE app servers There are no major vendors providing support for community builds of any Open Source application server. For example, IBM used to provide community support for builds of Apache Geronimo, not anymore. Red Hat does not commercially support builds of WildFly and if I remember correctly, never supported community builds of former JBoss AS. Oracle has never commercially supported GlassFish Server Open Source Edition builds. Tomitribe appears to be the exception to the rule, offering commercial support for Apache TomEE. Fact #5 - WebLogic and GlassFish share several Java EE implementations It has been no secret that although GlassFish and WebLogic share some JSR implementations (as stated in the The Aquarium announcement: JPA, JSF, WebSockets, CDI, Bean Validation, JAX-WS, JAXB, and WS-AT) and WebLogic understands GlassFish deployment descriptors, they are not from the same codebase. Fact #6 - WebLogic is not for GlassFish what JBoss EAP is for WildFly WebLogic is closed-source offering. It is commercialized through a license-based plus support fee model. OGS although from an Open Source code, has had the same commercial model as WebLogic. Still, one cannot compare GlassFish/WebLogic to WildFly/JBoss EAP. It is simply not the same case, since Oracle has had two different products from different codebases. The comparison should be limited to GlassFish Open Source / Oracle GlassFish Server versus WildFly / JBoss EAP. Read the complete article here WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Glassfish,training,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

Read the article

CodePlex Daily Summary for Thursday, May 20, 2010

CodePlex Daily Summary for Thursday, May 20, 2010New ProjectsAlphaChannel: Closed projectAragon Online Client: The Aragon Online Client is a front-end application allowing users to play the online game http://aragon-online.net The client fetches game data a...BISBCarManager: Car managerBlammo.Net: Blammo.Net is a simple logging system that allows for multiple files, has simple configuration, and is modular.C# IMAPI2 Samples: This project is my effort to port the VB Script IMAPI2 samples to C# 4.0 and provide CD/DVD Burning capabilities in C#. This takes advantage of th...DemotToolkit: A toolbox to help you enjoy the demotivators.FMI Silverlight Course: This is the site for the final project of the Silverlight course taught at the Sofia University in the summer semester of 2010.InfoPath Publisher Helper: Building a large set of InfoPath Templates? Bored of the repetive stsadm commands to deploy an online form? This tool will allow you to submit ...JSBallBounce - HTML5 Stereocopy: A demo of basic stereoscopy in HTML5Kindler: Kindler allows you to easily convert simply HTML into documents that can be easily read on the Amazon Kindle.Maybe: Maybe or IfNotNull using lambdas for deep expressions. int? CityId= employee.Maybe(e=>e.Person.Address.City);PopCorn Project : play music with system beeps: PopCorn is an application that can play monophonic music through system beeps. You can launch music on the local machine, or on a remote server thr...RuneScape 2 Chronos - Emulation done right.: RuneScape 2 Chronos is a RuneScape 2 Emulator framework. It is completely open-source and is programmed in a way in which should be simpler for it'...RWEntregas: Projeto do Rogrigo e Wender referente a entregasSilverAmp: A media player to demonstrate lots of new Silverlight 4 features. Running out of browser and reading files from the MyMusic folder are two of them....Silverlight Scheduler: A light-weight silverlight scheduler control.SimpleContainer: SimpleContainer is very simple IoC container that consists of one class that implements two remarkable methods: one for registration and one for re...sqlserverextensions: This project will provide some use operations for files and directories. Further development will include extended string operations.TechWorks Portugal Sample BI Project: Techworks is a complete Microsoft BI sample project customized for Portugal to be used in demo and learning scenarios. It is based in SQL Server 20...Test4Proj: Test4ProjTV Show Renamer: TV Show Renamer is a program that is designed to take files downloaded off the internet and rename them to a more user friendly file name. It is fo...UnFreeZeMouSeW7: This small application disable or enable the standby mode on Windows 7 devices. As the mouse pointer freezes or the latency increase on some device...VianaNET - Videoanalysis for physical motion: The VianaNET project targets physics education. The software enables to analyze the motion of colored objects in life-video and video files. The da...Visual Studio 2010 extension for helping SharePoint 2010 debugging: This is a Visual Studio 2010 extensibility project that extends the debugging support for the built-in SharePoint 2010 tools with new menu items an...Visual Studio 2010 Load Test Plugins Library: Useful plugin library for Visual Studio Load Test 2010 version. (Best for web tests).VMware Lab Manager Powershell Cmdlet: This is a simple powershell cmdlet which connects you with the VMware lab manager internal soap api.Webgame UI: Bot to webgameNew ReleasesActipro WPF Controls Contrib: v2010.1: Minor tweaks and updated to target Actipro WPF Studio 2010.1. Addition of Editors.Interop.Datagrid project, which allows Actipro Editors for WPF t...Blammo.Net: Blammo.Net 1.0: This is the initial release of Blammo.Net.Build Version Increment Add-In Visual Studio: Shared Assembly Info Setup: Example solution that makes use of one shared assembly info file.CSS 360 Planetary Calendar: Zero Feature Release: =============================================================================== Zero Feature Release Version: 0.0 Description: This is a binar...DotNetNuke® Community Edition: 05.04.02: Updated the Installation Wizard's Polish & German language packs. Improved performance of Sql script for listing modules by portal. Improved De...DotNetNuke® Store: 02.01.36: What's New in this release? Bugs corrected: - The reference to resource.zip has been commented in the Install package. Sorry for that it's my mista...Extend SmallBasic: Teaching Extensions v.016: added turtle tree quizExtremeML: ExtremeML v1.0 Beta 2: Following the decision to terminate development of the Premium Edition of ExtremeML, this release includes all code previously restricted to the Pr...InfoPath Publisher Helper: 1st Release: InfoPath Publisher Helper Tool The version is mostly stable. There are some UI errors, which can be ignored. The code has not been cleaned up so t...JSBallBounce - HTML5 Stereocopy: HTML5 Stereoscopic Bouncing Balls Demo: Stereoscopic rendering in HTML5kdar: KDAR 0.0.22: KDAR - Kernel Debugger Anti Rootkit - signature's bases updated - ALPC port jbject check added - tcpip internal critical area checks added - some ...Lightweight Fluent Workflow: Objectflow core: Release Notes Fixed minor defects Framework changes Added IsFalse for boolean conditions Defects fixed IsTrue works with Not operator Installati...LiquidSilver SharePoint Framework: LiquidSilver 0.2.0.0 Beta: Changes in this version: - Fixed a bug in HgListItem when parsing double and int fields. - Added the LiquidSilver.Extra project. - Added the Liquid...Matrix: MatrixPlugin-0.5.1: Works with UniqueRoutes plugin on Google Code Works in Linux (path changes, variable usage etc) Builds .st2plugin by default Adapted to ST3MRDS Samples: MRDS Samples 1.0: Initial Release Please read the installation instructions on the Read Me page carefully before you unzip the samples. This ZIP file contains sourc...PopCorn Project : play music with system beeps: Popcorn v0.1: 1st beta releaseRuneScape 2 Chronos - Emulation done right.: Revision 0: Alpha stage of the Chronos source.SCSI Interface for Multimedia and Block Devices: Release 13 - Integrated Shell, x64 Fixes, and more: Changes from the previous version: - Added an integrated shell browser to the program and removed the Add/Remove File/Folder buttons, since the she...Silverlight Console: Silverlight Console Release 2: Release contains: - Orktane.Console.dll - Orktane.ScriptActions.dll Release targets: - Silverlight 4 Dependencies: - nRoute.Toolkit for Silverlig...SimpleContainer: SimpleContainer: Initial release of SimpleContainer library.Springshield Sample Site for EPiServer CMS: Springshield 1.0: City of Springshield - The accessible sample site for EPiServer CMS 6. Read the readme.txt on how to install.SQL Trim: 20100519: Improved releasesqlserverextensions: V 0.1 alpha: Version 0.1 Alphasvchost viewer: svchost viewer ver. 0.5.0.1: Got some feedback from a user, with some nice ideas so here they are: • Made the program resizable. • Program now saves the size and position when...Tribe.Cache: Tribe.Cache RC: Release Candidate There are breaking changes between BETA and RC :- 1) Cache Dictionary is now not exposed to the client. 2) Completly Thread Sa...TV Show Renamer: TV Show Renamer: This is the first public release. Don't worry that it is version 2.1 that is because i keep adding features to it and then upping the version numbe...UnFreeZeMouSeW7: UnFreeZeMouSeW7 0.1: First releaseVCC: Latest build, v2.1.30519.0: Automatic drop of latest buildVianaNET - Videoanalysis for physical motion: VianaNET V1.1 - alpha: This is the first alpha release of the completely rewritten Viana. Known issues are: - sometimes black frame at initial load of video - no abilit...visinia: visinia_1: The beta is gone, the visinia is here with visinia 1. now you can confidently install visinia use visinia and enjoy visinia. This version of visini...visinia: visinia_1_Src: The beta is gone, the visinia is here with visinia 1. now you can confidently install visinia use visinia and enjoy visinia. This version of visini...Visual Studio 2010 extension for helping SharePoint 2010 debugging: 1.0 First public release: The extension is released as a Visual Studio 2010 solution. See my related blog post at http://pholpar.wordpress.com/2010/05/20/visual-studio-2010-...Visual Studio 2010 Load Test Plugins Library: version 1 stable: version 1 stableVMware Lab Manager Powershell Cmdlet: LMCmdlet 1.0.0: first Release. You need to be an Administrator to install this cmdlet. After you run setup open powershell type: Get-PSSnapin -Registered you sh...WF Personalplaner: Personalplaner v1.7.29.10139: - Wenn ein Schema erstellt wird mit der Checkbox "Als neues Schema speichern" wurde pro Person ein Schema erstellt - Wenn ein Pensum geändert wurde...XAM.NET: XAM 1.0p2 + Issue Tracker 8396: Patch release for Issue Tracker 8396Xrns2XMod: Xrns2XMod 1.2: Fixed 32 bit flac conversion - Thanks to Yuri for updating FlacBox librariesMost Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrPHPExcelGMap.NET - Great Maps for Windows Forms & PresentationCustomer Portal Accelerator for Microsoft Dynamics CRMBlogEngine.NETWindows Azure Command-line Tools for PHP DevelopersCassiniDev - Cassini 3.5/4.0 Developers EditionSQL Server PowerShell ExtensionsFluent Ribbon Control Suite

Read the article

CodePlex Daily Summary for Wednesday, October 10, 2012

CodePlex Daily Summary for Wednesday, October 10, 2012Popular ReleasesA C# 4.0 Push Notification Helper Library for WP7.0 & WP7.1: Easy Notification 1.0.0: New Feature - Send Tile, Toast & Raw Notifications to Windows Phone Devices. New Feature - Supports Windows Phone 7.0 & Windows Phone 7.1. New Feature - Validation rules are in-built for Push Notification Messages. New Feature - Strongly typed interfaces. New Feature - Supports synchronous & asynchronous methods to send notifications. New Feature - Supports authenticated notifications using X509 Certificates. New Feature - Supports Callback Registration Requests. New Feature - S...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Online Image Editor: Online Image Editor v1.1: If you have problems with this tool, please email me at amisouvikdas@gmail.com or You can also participate this project to improve this.Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...DevLib: 69721 binary dll: 69721 binary dllVidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...DotNetNuke Boards: 01.00.00: This beta release represents the end of training session 1, based on jQuery and Knockout integration in DotNetNuke 6.2.3. It is designed to allow a single user or multiple users to add/edit/delete cards but no cards can be assigned to anyone at this point. This release is not intended for production use!Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projectsadcc2: adccAP.Framework: This a asp.net mvc3 of test web site .EFCodeFirst: Projeto criado para experimentos e estudos com o Entity FrameworkEXPS-RAT: HelloFiskalizacija za developere: Projekt je namijenjen razvojnim inženjerima, programerima, developerima i svima ostalima koji se bave razvojem programskih rješenja za fiskalne blagajne.Galleriffic App for SharePoint 2013: Galleriffic App is an app part for SharePoint 2013 to display a picture gallery with cool JQuery animations and effects. Hack.net: Hack.net is a Roguelike clone similar to NetHack or Roguelike.Inno Setup For .NET Application: This is a simple inno setup for .net developerJava Special Functions Library: Java Special Functions Library implemented as a public class part of my larger mathematical package.LocalFileOpener: The LocalFileOpener plugin opens an intent to help you easily open local files on the device under installed applications.localizr - .NET Collaborative Translation & Localization: Localizr is a platform for collaborative localization and translation of .NET projects.Metro UI CSS: Metro UI CSS a set of styles to create a site with an interface similar to Windows 8 Metro UI. MoskieDotNet: A sandbox for me learn some new technologies.Mouse Automation: Allows a user to automate repetitive clicking within EverQuestMS SQL DB Schema Updater: Simple tool for updating MS SQL database schema based on "ideal" database model.n8design Tools: Tools any Source Code by Stefan Bauer.NasosCS: ???? ?? ??????Pokemonochan: ALright this is a Pokemon MMo bound to come out someday!PotatoSoft: ?????????????!Power Mirrors: Leverage the usefulness of SQL Server mirrors using PowerShell and SMO. Create mirrors from scratch, assign witnesses and test failovers, all from PowerShell! Project13251010: sdfdReal Time Data Bus: A collection of real time data bus implementations.Ricky Tailor's ASP.NET Web 2.0 Project: 7COM0203 Web Scripting And Content Creation Task 1. SampleTFS2: Sample Projectslotcarduino - An Arduino based slotcar timing project: Slotcar timing project based on Arduino Uno/Mega 2560. Standalone system with serial enabled graphic display.System.Data.Entity.Repository: Entity framework code first framework wrapper with support for generic repository pattern, N-Tier application and Transaction Management for rapid developmentTest Marron: This project is a test to explore codeplexTmib Video Downloader: A small youtube video downloader. Created in C#Web Scripting & Content Creation: Fhame Rashid MSc Software Engineering Module Log: Web-Scripting and Content Creationwebbase: webbaseWebScriptingandContentCreation: This project is for the MSc module Web Scripting and Content Creation.Zuordnung: Zuordnung

Read the article

10 Reasons Why Java is the Top Embedded Platform

- by Roger Brinkley

With the release of Oracle ME Embedded 3.2 and Oracle Java Embedded Suite, Java is now ready to fully move into the embedded developer space, what many have called the "Internet of Things". Here are 10 reasons why Java is the top embedded platform. 1. Decouples software development from hardware development cycle Development is typically split between both hardware and software in a traditional design flow . This leads to complicated co-design and requires prototype hardware to be built. This parallel and interdependent hardware / software design process typically leads to two or more re-development phases. With Embedded Java, all specific work is carried out in software, with the (processor) hardware implementation fully decoupled. This with eliminate or at least reduces the need for re-spins of software or hardware and the original development efforts can be carried forward directly into product development and validation. 2. Development and testing can be done (mostly) using standard desktop systems through emulation Because the software and hardware are decoupled it now becomes easier to test the software long before it reaches the hardware through hardware emulation. Emulation is the ability of a program in an electronic device to imitate another program or device. In the past Java tools like the Java ME SDK and the SunSPOTs Solarium provided developers with emulation for a complete set of mobile telelphones and SunSpots. This often included network interaction or in the case of SunSPOTs radio communication. What emulation does is speed up the development cycle by refining the software development process without the need of hardware. The software is fixed, redefined, and refactored without the timely expense of hardware testing. With tools like the Java ME 3.2 SDK, Embedded Java applications can be be quickly developed on Windows based platforms. In the end of course developers should do a full set of testing on the hardware as incompatibilities between emulators and hardware will exist, but the amount of time to do this should be significantly reduced. 3. Highly productive language, APIs, runtime, and tools mean quick time to market Charles Nutter probably said it best in twitter blog when he tweeted, "Every time I see a piece of C code I need to port, my heart dies a little. Then I port it to 1/4 as much Java, and feel better." The Java environment is a very complex combination of a Java Virtual Machine, the Java Language, and it's robust APIs. Combine that with the Java ME SDK for small devices or just Netbeans for the larger devices and you have a development environment where development time is reduced significantly meaning the product can be shipped sooner. Of course this is assuming that the engineers don't get slap happy adding new features given the extra time they'll have. 4. Create high-performance, portable, secure, robust, cross-platform applications easily The latest JIT compilers for the Oracle JVM approach the speed of C/C++ code, and in some memory allocation intensive circumstances, exceed it. And specifically for the embedded devices both ME Embedded and SE Embedded have been optimized for the smaller footprints. In portability Java uses Bytecode to make the language platform independent. This creates a write once run anywhere environment that allows you to develop on one platform and execute on others and avoids a platform vendor lock in. For security, Java achieves protection by confining a Java program to a Java execution environment and not allowing it to access other parts of computer. In variety of systems the program must execute reliably to be robust. Finally, Oracle Java ME Embedded is a cross-industry and cross-platform product optimized in release version 3.2 for chipsets based on the ARM architectures. Similarly Oracle Java SE Embedded works on a variety of ARM V5, V6, and V7, X86 and Power Architecture Linux. 5. Java isolates your apps from language and platform variations (e.g. C/C++, kernel, libc differences) This has been a key factor in Java from day one. Developers write to Java and don't have to worry about underlying differences in the platform variations. Those platform variations are being managed by the JVM. Gone are the C/C++ problems like memory corruptions, stack overflows, and other such bugs which are extremely difficult to isolate. Of course this doesn't imply that you won't be able to get away from native code completely. There could be some situations where you have to write native code in either assembler or C/C++. But those instances should be limited. 6. Most popular embedded processors supported allowing design flexibility Java SE Embedded is now available on ARM V5, V6, and V7 along with Linux on X86 and Power Architecture platforms. Java ME Embedded is available on system based on ARM architecture SOCs with low memory footprints and a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN). 7. Support for key embedded features (low footprint, power mgmt., low latency, etc) All embedded devices by there very nature are constrained in some way. Economics may dictate a device with a less RAM and ROM. The CPU needs can dictate a less powerful device. Power consumption is another major resource in some embedded devices as connecting to consistent power source not always desirable or possible. For others they have to constantly on. Often many of these systems are headless (in the embedded space it's almost always Halloween). For memory resources ,Java ME Embedded can run in environment as low as 130KB RAM/350KB ROM for a minimal, customized configuration up to 700KB RAM/1500KB ROM for the full, standard configuration. Java SE Embedded is designed for environments starting at 32MB RAM/39MB ROM. Key functionality of embedded devices such as auto-start and recovery, flexible networking are fully supported. And while Java SE Embedded has been optimized for mid-range to high-end embedded systems, Java ME Embedded is a Java runtime stack optimized for small embedded systems. It provides a robust and flexible application platform with dedicated embedded functionality for always-on, headless (no graphics/UI), and connected devices. 8. Leverage huge Java developer ecosystem (expertise, existing code) There are over 9 million developers in world that work on Java, and while not all of them work on embedded systems, their wealth of expertise in developing applications is immense. In short, getting a java developer to work on a embedded system is pretty easy, you probably have a java developer living in your subdivsion. Then of course there is the wealth of existing code. The Java Embedded Community on Java.net is central gathering place for embedded Java developers. Conferences like Embedded Java @ JavaOne and the a variety of hardware vendor conferences like Freescale Technlogy Forums offer an excellent opportunity for those interested in embedded systems. 9. Easily create end-to-end solutions integrated with Java back-end services In the "Internet of Things" things aren't on an island doing an single task. For instance and embedded drink dispenser doesn't just dispense a beverage, but could collect money from a credit card and also send information about current sales. Similarly, an embedded house power monitoring system doesn't just manage the power usage in a house, but can also send that data back to the power company. In both cases it isn't about the individual thing, but monitoring a collection of things. How much power did your block, subdivsion, area of town, town, county, state, nation, world use? How many Dr Peppers were purchased from thing1, thing2, thingN? The point is that all this information can be collected and transferred securely (and believe me that is key issue that Java fully supports) to back end services for further analysis. And what better back in service exists than a Java back in service. It's interesting to note that on larger embedded platforms that support the Java Embedded Suite some of the analysis might be done on the embedded device itself as JES has a glassfish server and Java Database as part of the installation. The result is an end to end Java solution. 10. Solutions from constrained devices to server-class systems Just take a look at some of the embedded Java systems that have already been developed and you'll see a vast range of solutions. Livescribe pen, Kindle, each and every Blu-Ray player, Cisco's Advanced VOIP phone, KronosInTouch smart time clock, EnergyICT smart metering, EDF's automated meter management, Ricoh Printers, and Stanford's automated car are just a few of the list of embedded Java implementation that continues to grow. Conclusion Now if your a Java Developer you probably look at some of the 10 reasons and say "duh", but for the embedded developers this is should be an eye opening list. And with the release of ME Embedded 3.2 and the Java Embedded Suite the embedded developers life is now a whole lot easier. For the Java developer your employment opportunities are about to increase. For both it's a great time to start developing Java for the "Internet of Things".

Read the article

CodePlex Daily Summary for Monday, November 22, 2010

CodePlex Daily Summary for Monday, November 22, 2010Popular ReleasesSQL Monitor: SQLMon 1.1: changes: 1.added sql job monitoring; 2.added settings save/loadASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6DotSpatial: DotSpatial 11-21-2010: This release introduces the following Fixed bugs related to dispose, which caused issues when reordering layers in the legend Fixed bugs related to assigning categories where NULL values are in the fields New fast-acting resize using a bitmap "prediction" of what the final resize content will look like. ImageData.ReadBlock, ImageData.WriteBlock These allow direct file access for reading or writing a rectangular window. Bitmaps are used for holding the values. Removed the need to stor...Minemapper - dynamic mapping for Windows: Minemapper v0.1.0: Pan by: dragging the mouse using the buttons Zoom by: scrolling the mouse wheel using the buttons using the slider Night support Biome support Skylight support Direction support: East West Height slicingMDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Smith Html Editor: Smith Html Editor V0.75: The first public release.MiniTwitter: 1.59: MiniTwitter 1.59 ???? ?? User Streams ????????????????? ?? ?????????????? ???????? ?????????????.NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Code Sample from Microsoft: Visual Studio 2010 Code Samples 2010-11-19: Code samples for Visual Studio 2010Prism Training Kit: Prism Training Kit 4.0: Release NotesThis is an updated version of the Prism training Kit that targets Prism 4.0 and added labs for some of the new features of Prism 4.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication MEF Navigation Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2...Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...VidCoder: 0.7.2: Fixed duplicated subtitles when running multiple encodes off of the same title.Craig's Utility Library: Craig's Utility Library Code 2.0: This update contains a number of changes, added functionality, and bug fixes: Added transaction support to SQLHelper. Added linked/embedded resource ability to EmailSender. Updated List to take into account new functions. Added better support for MAC address in WMI classes. Fixed Parsing in Reflection class when dealing with sub classes. Fixed bug in SQLHelper when replacing the Command that is a select after doing a select. Fixed issue in SQL Server helper with regard to generati...MFCMAPI: November 2010 Release: Build: 6.0.0.1023 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeDotNetNuke® Community Edition: 05.06.00: Major HighlightsAdded automatic portal alias creation for single portal installs Updated the file manager upload page to allow user to upload multiple files without returning to the file manager page. Fixed issue with Event Log Email Notifications. Fixed issue where Telerik HTML Editor was unable to upload files to secure or database folder. Fixed issue where registration page is not set correctly during an upgrade. Fixed issue where Sendmail stripped HTML and Links from emails...mVu Mobile Viewer: mVu Mobile Viewer 0.7.10.0: Tube8 fix.EPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.8.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the serverNew Features Improved chart support Different chart-types series on the same chart Support for secondary axis and a lot of new properties Better styling Encryption and Workbook protection Table support Import csv files Array formulas ...and a lot of bugfixesNew Projects.NET 4 Workflow Activities for Citrix: .NET 4 based workflow activities targeting the Citrix infrastructure.Age calculator: It calculates the age of a person in days on specification of date of birth.Another Azure Demo Project: An Azure demo project - based on the one we (Johan Danforth and Dag König) showed on the Swedish Azure Summit.ASP.NET Layered Web Application: N-Layered Web Applications with ASP.NET based on the article by Imar Spaanjaars.Binzlog: Donet ????。Build Solution: Buid Visual Studio applications with .Net code.CondominioOnline: Projeto para o desenvolvimento colaborativo dos diagramas de desenvolvimento.Create Dynamic UI with WPF: Create Dynamic UI with WPFDNN Fanbox: dot net nuke plugin facebook fanboxDNN Tweet: DNN Tweet is a twitter plugin for DotnetNuke DotNetNuke Notes: dnnNotes allows you to create simple notes that are stored on your DotNetNuke site.Easy Login PHP Script: Give your site a professional looking Members Area with this completely FREE and easy-to-use PHP script! Developed in PHP and uses MySQL as a database backend. Go on, click here, you know you want to! :DFind Nigerian Traditional Fashion Styles: NaijaTradStyles is a social network for Nigerians all over the world to promote the Nigerian economy, designs and cultures, fashion designers and individuals. This site allows users to share fashion ideas, activities, events, and interests within their individual networks. The GreenArrow: Just a simple mark-locate-click automation tool by comparing graphic pieces. GreenArrow makes it easier for automation script writer to handle UI elements which cannot be located by normal methods, like keyword or classid. Libero API for Fusion Charts in ASP.Net: Libero.FusionChartsAPI is made for Asp.Net (Webforms and MVC) developers to make easier to implement Fusion Charts in their projects. It is developed in framework .Net 4 (but supports framework 3.5) to target ASP.Net projects. Minemapper - dynamic mapping for Windows: Minemapper is an interactive, dynamic mapper for Minecraft. It uses mcmap to generate small map image tiles, then lets you pan and zoom around, quickly generating new tiles as needed.MoodleAzure: Enable Moodle 1.9.9 to run on Windows Azure and SQL AzureOpalis Active Directory Extension: A Opalis Integration Pack Project for Active Directory Integration. Done with C# Directory Services.Quick Finger SDK: Quick Finger SDK helps you to build a wide range of applications to use fingerprint recognition. Quick Finger SDK makes it easier for developers to integrate fingerprint recognition into their software. It's developed in Visual C++. Regex Batch Replacer (Multi-File): Regex Batch Replacer uses regular expression to find and replace text in multiple files.RiverRaid X: A clone of the classic Atari 2600 arcade game, River Raid. Uses XNA 4.0 and Neat game engine (http://neat.codeplex.com)SharePoint Commander: SharePoint 2010 administrative tool for developers and administrators.StreamerMatch: A tool for streamers, focused at Starcraft II at the moment.Tab Web Part: This solution is used to present the WebParts in a tab like user interface. It is tested on a SharePoint 2010 sandboxed solution. With this solution, all the WebParts added in a particular zone will appear in a tab kind of interface in the design mode. The javascript transformsTomato: XNA-based rendering middleware.UnicornObjects: todoVina: VinaWPF Photo/Image Manager: A WPF playground for many projects, including an image viewer, filters, image modification, photo organization, etc.WXQCW: wxqcw news platformYobbo Guitar: Yobbo guitar is a web application developed in ASP.NET that allows users to share guitar songs and chord progressions.

Read the article

Tools of the Trade

- by Ajarn Mark Caldwell

I got pretty excited a couple of days ago when my new laptop arrived. “The new phone books are here! The new phone books are here! I’m a somebody!” - Steve Martin in The Jerk It is a Dell Precision M4500 with an Intel i7 Core 2.8 GHZ running 64-bit Windows 7 with a 15.6” widescreen, 8 GB RAM, 256 GB SSD. For some of you high fliers, this may be nothing to write home about, but compared to the 32–bit Windows XP laptop with 2 GB of RAM and a regular hard disk that I’m coming from, it’s a really nice step forward. I won’t even bore you with the details of the desktop PC I was first given when I started here 5 1/2 years ago. Let’s just say that things have improved. One really nice thing is that while we are definitely running a lean and mean department in terms of staffing, my boss believes in supporting that lean staff with good tools in order to stay lean instead of having to spend even more money on additional employees. Of course, that only goes so far, and at some point you have to add more people in order to get more work done, which is why we are bringing on-board a new employee and a new contract developer next week. But that’s a different story for a different time. But the main topic for this post is to highlight the variety of tools that I use in my job and that you might find useful, too. This is easy to do right now because the process of building up my new laptop from scratch has forced me to assemble a list of software that had to be installed and configured. Keep in mind as you look through this list that I play many roles in our company. My official title is Software Engineering Manager, but in addition to managing the team, I am also an active ASP.NET and SQL developer, the Database Administrator, and 50% of the SAN Administrator team. So, without further ado, here are the tools and some comments about why I use them: Tool Purpose Virtual Clone Drive Easily mount an ISO image as a DVD Drive. This is particularly handy when you are downloading disk images from Microsoft for your tools. SQL Server 2008 R2 Developer Edition We are migrating all of our active systems to SQL 2008 R2. Developer Edition has all the features of Enterprise Edition, but intended for development use. SQL Server 2005 Developer Edition (BIDS ONLY) The migration to SSRS 2008 R2 is just getting started, and in the meantime, maintenance work still has to be done on the reports on our SQL 2005 server. For some reason, you can’t use BIDS from 2008 to write reports for a 2005 server. There is some different format and when you open 2005 reports in 2008 BIDS, it forces you to upgrade, and they can no longer be uploaded to a 2005 server. Hopefully Microsoft will fix this soon in some manner similar to Visual Studio now allows you to pick which version of the .NET Framework you are coding against. Visual Studio 2010 Premium All of our application development is in ASP.NET, and we might as well use the tool designed for it. I’ve used a version of Visual Studio going all the way back to VB 6.0 and Visual Interdev. Vault Professional Client Several years ago we replaced Visual Source Safe with SourceGear Vault (then Fortress, and now Vault Pro), and I love it. It is very reliable with low overhead - perfect for a small to medium size development team. And being a small ISV, their support is exceptional. Red-Gate Developer Bundle with the SQL Source Control update for Vault I first used, and fell in love with, SQL Prompt shortly before Red-Gate bought it, and then Red-Gate’s first release made me love it even more. SQL Refactor (which has since been rolled into the latest version of SQL Prompt) has saved me many hours and migraine’s trying to understand somebody else’s code when their indenting was nonexistant, or worse, irrational. SQL Compare has been awesome for troubleshooting potential schema issues between different instances of system databases. SQL Data Compare helped us identify the cause behind a bug which appeared in PROD but could not be reproduced in a nearly (but not quite exactly) identical copy in UAT. And the newest tool we are embracing: SQL Source Control. I blogged about it here (and here, and here) last December. This is really going to help us keep each developer’s copy of the database in sync with one another. Fiddler Helps you watch the whole traffic stream on web visits. Haven’t used it a lot, but it did help me track down some odd 404 errors we were finding in our own application logs. Has some other JavaScript troubleshooting capabilities, but some of its usefulness has been supplanted by the Developer Tools option in IE8. Funduc Search & Replace Find any string anywhere in a mound of source code really, really fast. Does RegEx searches, if you understand that foreign language. Has really helped with some refactoring work to pinpoint, for example, everywhere a particular stored procedure is referenced, whether in .NET code or other SQL procedures (which we have in script files). Provides in-context preview of the search results. Fantastic tool, and a bargain price. SciTE SciTE is a Scintilla based Text Editor and it is a fantastic, light-weight tool for quickly reviewing (or writing) program code, SQL scripts, and extract files. It has language-specific syntax highlighting. I used it to write several batch and CMD programs a year ago, and to examine data extract files for exchanging information with other systems. Extremely handy are the options to View End of Line and View Whitespace. Ever receive a file that is supposed to use CRLF as an end-of-line marker, but really only has CRs? SciTE will quickly make that visible. Infragistics Controls We do a lot of ASP.NET development, and frequently use the WebGrid, WebTab, and date picker controls. We will likely be implementing the Hierarchical Data Grid soon. Infragistics has control suites for WebForms, WinForms, Silverlight, and coming soon MVC/JQuery. WinZip - WITH Command-Line add-in The classic compression program with a great command-line interface that allows me to build those CMD (and soon PowerShell) programs for automated compression jobs. Our versioned Build packages are zip files. XML Notepad Haven’t used this a lot myself, but one of my team really likes it for examining large XML files. LINQPad Again, haven’t used this one a lot, but it was recommended to me for learning and practicing my LINQ skills which will come in handy as we implement Entity Framework. SQL Sentry Plan Explorer SQL Server Show Plan on steroids. Great for helping you focus on the parts of a large query that are of most importance. Also great for just compressing the graphical plan into more readable layout. Araxis Merge A great DIFF and Merge tool. SourceGear provides a great tool called DiffMerge that we use all the time, but occasionally, I like the cross-edit capabilities of Araxis Merge. For a while, we also produced DIFF reports in HTML that showed all the changes that occurred between two releases. This was most important when we were putting out very small, but very important hot fixes on a very politically hot system. The reports produced by Araxis Merge gave the Director of IS assurance that we were not accidentally introducing ripples throughout the system with our releases. Idera SQL Admin Toolset A great collection of tools including a password checker to help analyze your SQL Server for weak user passwords, a Backup Status tool to quickly scan a large list of servers and databases to identify any that are overdue for backups. Particularly helpful for highlighting new databases that have been deployed without getting included in your backup processing. I also like Space Analyzer to keep an eye on disk space consumed by database files. Idera SQL Job Manager This free tool provides a nice calendar view of SQL Server Job Schedules, but to a degree, you also get what you pay for. We will be purchasing SQL Sentry Event Manager later this year as an even better job schedule reviewer/manager. But in the meantime, this at least gives me a good view on potential resource conflicts across multiple instances of SQL Server. DBFViewer 2000 I inherited a couple of FoxPro databases that I have to keep an eye on occasionally and have not yet been able to migrate them to SQL Server. Balsamiq Mockups We are still in evaluation-mode on this tool, but I really like it as a quick UI mockup tool that does not require Visual Studio, so someone other than a programmer can do UI design. The interface looks hand-drawn which definitely has some psychological benefits when communicating to users, too. FeedDemon I have to stay on top of my WAY TOO MANY blog subscriptions somehow. I may read blogs on a couple of different computers, and FeedDemon’s integration with Google Reader allows me to keep them all in sync. I don’t particularly like the Google Reader interface, or the fact that it always wanted to mark articles as read just because I scrolled past them. FeedDemon solves this problem for me, and provides a multi-tabbed interface which is good because fairly frequently one blog will link to something else I want to read, and I can end up with a half-dozen open tabs all from one article. Synergy+ In my office, I run four monitors across two computers all with one mouse and keyboard. Synergy is the magic software that makes this work. TweetDeck I’m not the most active Tweeter in the world, but when I want to check-in with the Twitterverse, this really helps. I have found the #sqlhelp and #PoshHelp hash tags particularly useful, and I also have columns setup to make it easy to monitor #sqlpass, #PASSProfDev, and short term events like #sqlsat68. Whew! That’s a lot. No wonder it took me a couple of days to get everything setup the way I wanted it. Oh, that and actually getting some work accomplished at the same time. Anyway, I know that is a huge dump of info, and most people never make it here to the end, so for those who did, let me say, CONGRATULATIONS, you made it! I hope you’ll find a new tool or two to make your work life a little easier.

Read the article

ADDS: 1 - Introducing and designing

- by marc dekeyser

Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} What is ADDS? Every Microsoft oriented infrastructure in today's enterprises will depend largely on the active directory version built by Microsoft. It is the foundation stone on which all other products (Exchange, update services, office communicator, the system center family, etc) rely on to get their information. And that is just looking at it from an infrastructure perspective. A well designed and implemented Active Directory implementation makes life for IT personnel and user alike a lot easier. Centralised management and the abilities opened up by having it in place are ample. But what is Active Directory Domain Services? We can look at ADDS as a centralised directory containing all objects your infrastructure runs on in one way or another. Since it is a Microsoft product you'll obviously not be seeing linux or mac clients listed in here (exceptions exist) but in general we can say it contains everything your company has in place in one form or another. The domain name services. The domain naming service (or DNS for short) is a service which translates IP address (the identifiers for each computer in your domain) into readable and easy to understand names. This service is a prequisite for ADDA to work and having wrong record in a DNS server will make any ADDS service fail. Generally speaking a DNS service will be run on the same server as the ADDS service but it is worth wile to remember that this is not necessary. You could, for example, run your DNS services on a linux box (which would need special preparing to host an ADDS integrated DNS zone) and run the ADDS service of another box… Where to start? If the aim is to put in place a first time implementation of ADDS in your enterprise there are plenty of things to consider depending on what you are going to do in the long run. Great care has to be taken when first designing and implementing as having it set up wrong will cause a headache down the line. It is for that reason that I like to start building from the bottom up and start with a generic installation of ADDS (which will still differ for every client) and make it adaptable for future services which can hook in to the existing environment. Adapting existing environments is out of scope for this document (and series) although it is possible to take the pointers and change your existing environment to run in a smoother manor. Take great care when changing things as one small slip of the hand can give you a forest wide failure… Whenever starting with an ADDS deployment I ask the client the following questions: What are your long term plans and goals? How flexible do you want it? Are you currently linux heavy and want to keep this or can we go for an all Microsoft design? Those three questions should give some sort of indicator what direction can be taken and if the client has thought about some things themselves :). The technical side of things What is next to consider is what kind of infrastructure is already in place. For these series I'll keep it simple and introduce some general concepts without going in to depth on integrating ADDS with other DNS services. Building from the ground up means we need to consider our layers on which our infrastructure will rely. In my view that goes as follows: Network (WAN/LAN links and physical sites DNS Namespacing All in one domain or split up in different domains/forests? Security (both for ADDS and physical sites) The network side of things Looking at how the network is currently set up can potentially teach us a large deal about the client. Do they have multiple physical site? What network speeds exist between these sites, etc… Depending on this information we will design our site links (which controls replication) in future stages. DNS Namespacing Maybe the single most intresting thing to know is what the domain will be named (ADDS will need a DNS domain with the same name) and where this will be hosted. Note that active directory can be set up with a singe name (aka contoso instead of contoso.com) but it is highly recommended to never do this. If you do end up with a domain like that for some reason there will be a lot of services that are going to give you good grief in the future (exchange being one of them). So one of the best practises would be always to use a double name (contoso.com or contoso.lan for example). Internal namespace A single namespace is just what it sounds like. You have a DNS domain which is different internally from what the client has as an external namespace. f.e. contoso.com as an external name (out on the internet) and contoso.lan on the internal network. his setup is has its advantages in that you have more obscurity from the internet in the DNS side of this but it will require additional work to publish services to the web. External namespace Quite like the internal namespace only here you do not differ the internal namespace of the company from what is known on the internet. In this implementation you would host your own DNS servers for the external domain inside the network. Or in other words, any external computer doing a DNS lookup would contact your internal DNS server for the resolution. Generally speaking this set up is a bad idea from the security side of things. Split DNS Whilst using an external namespace design is fairly easy it involves a lot of security risks. Opening up you ADDS DSN servers for lookups exposes your entire network to the internet and should be avoided at any cost. And that is where the "split DNS" design comes in. In this setup up would still have the same namespace internally and externally but you would be using different DNS servers for lookups on the external network who have no records of your internal resources unless you explicitly publish them. All in one or not? In determining your active directory design you can look at the following possibilities: Single forest, Single domain Single forest, multiple domains Multiple forests, multiple domains I've listed the possibilities for design in increasing order of administrative magnitude. Microsoft recommends trying to use a single forest, single domain in as much situations as possible. It is, however, always possible that you require your services to be seperated from your users in a resource forest with trusts set up between the different forests. To start out I would go with the single forest design to avoid complexity unless there are strict requirements to have multiple forests. Security What kind of security is required on the domain and does this reflect the physical security on the sites? Not every client can afford to have a domain controller in a secluded server room on every site and it is exactly for that reason that Microsoft introduced the RODC (read only domain controller). A RODC is a domain controller that has been limited in functionality, in essence it will only cache the data you explicitly tell it to cache and in the case of a DC compromise (it being stolen) only a limited number of accounts will need to be affected. Th- Th- Th- That’s all folks! Well at least for now! In future editions of this series we’ll be walking through the different task that need to be done and the thought which needs to be put in to it. But for all editions we’ll be going from the concept of running a single forest, single domain with a split DNS setup… See you next time!

Read the article

Caveats with the runAllManagedModulesForAllRequests in IIS 7/8

- by Rick Strahl

One of the nice enhancements in IIS 7 (and now 8) is the ability to be able to intercept non-managed - ie. non ASP.NET served - requests from within ASP.NET managed modules. This opened up a ton of new functionality that could be applied across non-managed content using .NET code. I thought I had a pretty good handle on how IIS 7's Integrated mode pipeline works, but when I put together some samples last tonight I realized that the way that managed and unmanaged requests fire into the pipeline is downright confusing especially when it comes to the runAllManagedModulesForAllRequests attribute. There are a number of settings that can affect whether a managed module receives non-ASP.NET content requests such as static files or requests from other frameworks like PHP or ASP classic, and this is topic of this blog post. Native and Managed Modules The integrated mode IIS pipeline for IIS 7 and later - as the name suggests - allows for integration of ASP.NET pipeline events in the IIS request pipeline. Natively IIS runs unmanaged code and there are a host of native mode modules that handle the core behavior of IIS. If you set up a new IIS site or application without managed code support only the native modules are supported and fired without any interaction between native and managed code. If you use the Integrated pipeline with managed code enabled however things get a little more confusing as there both native modules and .NET managed modules can fire against the same IIS request. If you open up the IIS Modules dialog you see both managed and unmanaged modules. Unmanaged modules point at physical files on disk, while unmanaged modules point at .NET types and files referenced from the GAC or the current project's BIN folder. Both native and managed modules can co-exist and execute side by side and on the same request. When running in IIS 7 the IIS pipeline actually instantiates a the ASP.NET runtime (via the System.Web.PipelineRuntime class) which unlike the core HttpRuntime classes in ASP.NET receives notification callbacks when IIS integrated mode events fire. The IIS pipeline is smart enough to detect whether managed handlers are attached and if they're none these notifications don't fire, improving performance. The good news about all of this for .NET devs is that ASP.NET style modules can be used for just about every kind of IIS request. All you need to do is create a new Web Application and enable ASP.NET on it, and then attach managed handlers. Handlers can look at ASP.NET content (ie. ASPX pages, MVC, WebAPI etc. requests) as well as non-ASP.NET content including static content like HTML files, images, javascript and css resources etc. It's very cool that this capability has been surfaced. However, with that functionality comes a lot of responsibility. Because every request passes through the ASP.NET pipeline if managed modules (or handlers) are attached there are possible performance implications that come with it. Running through the ASP.NET pipeline does add some overhead. ASP.NET and Your Own Modules When you create a new ASP.NET project typically the Visual Studio templates create the modules section like this: <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <modules runAllManagedModulesForAllRequests="true" > </modules> </system.webServer> Specifically the interesting thing about this is the runAllManagedModulesForAllRequest="true" flag, which seems to indicate that it controls whether any registered modules always run, even when the value is set to false. Realistically though this flag does not control whether managed code is fired for all requests or not. Rather it is an override for the preCondition flag on a particular handler. With the flag set to the default true setting, you can assume that pretty much every IIS request you receive ends up firing through your ASP.NET module pipeline and every module you have configured is accessed even by non-managed requests like static files. In other words, your module will have to handle all requests. Now so far so obvious. What's not quite so obvious is what happens when you set the runAllManagedModulesForAllRequest="false". You probably would expect that immediately the non-ASP.NET requests no longer get funnelled through the ASP.NET Module pipeline. But that's not what actually happens. For example, if I create a module like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" /> by default it will fire against ALL requests regardless of the runAllManagedModulesForAllRequests flag. Even if the value runAllManagedModulesForAllRequests="false", the module is fired. Not quite expected. So what is the runAllManagedModulesForAllRequests really good for? It's essentially an override for managedHandler preCondition. If I declare my handler in web.config like this:<add name="SharewareModule" type="HowAspNetWorks.SharewareMessageModule" preCondition="managedHandler" /> and the runAllManagedModulesForAllRequests="false" my module only fires against managed requests. If I switch the flag to true, now my module ends up handling all IIS requests that are passed through from IIS. The moral of the story here is that if you intend to only look at ASP.NET content, you should always set the preCondition="managedHandler" attribute to ensure that only managed requests are fired on this module. But even if you do this, realize that runAllManagedModulesForAllRequests="true" can override this setting. runAllManagedModulesForAllRequests and Http Application Events Another place the runAllManagedModulesForAllRequest attribute affects is the Global Http Application object (typically in global.asax) and the Application_XXXX events that you can hook up there. So while the events there are dynamically hooked up to the application class, they basically behave as if they were set with the preCodition="managedHandler" configuration switch. The end result is that if you have runAllManagedModulesForAllRequests="true" you'll see every Http request passed through the Application_XXXX events, and you only see ASP.NET requests with the flag set to "false". What's all that mean? Configuring an application to handle requests for both ASP.NET and other content requests can be tricky especially if you need to mix modules that might require both. Couple of things are important to remember. If your module doesn't need to look at every request, by all means set a preCondition="managedHandler" on it. This will at least allow it to respond to the runAllManagedModulesForAllRequests="false" flag and then only process ASP.NET requests. Look really carefully to see whether you actually need runAllManagedModulesForAllRequests="true" in your applications as set by the default new project templates in Visual Studio. Part of the reason, this is the default because it was required for the initial versions of IIS 7 and ASP.NET 2 in order to handle MVC extensionless URLs. However, if you are running IIS 7 or later and .NET 4.0 you can use the ExtensionlessUrlHandler instead to allow you MVC functionality without requiring runAllManagedModulesForAllRequests="true": <handlers> <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" /> </handlers> Oddly this is the default for Visual Studio 2012 MVC template apps, so I'm not sure why the default template still adds runAllManagedModulesForAllRequests="true" is - it should be enabled only if there's a specific need to access non ASP.NET requests. As a side note, it's interesting that when you access a static HTML resource, you can actually write into the Response object and get the output to show, which is trippy. I haven't looked closely to see how this works - whether ASP.NET just fires directly into the native output stream or whether the static requests are re-routed directly through the ASP.NET pipeline once a managed code module is detected. This doesn't work for all non ASP.NET resources - for example, I can't do the same with ASP classic requests, but it makes for an interesting demo when injecting HTML content into a static HTML page :-) Note that on the original Windows Server 2008 and Vista (IIS 7.0) you might need a HotFix in order for ExtensionLessUrlHandler to work properly for MVC projects. On my live server I needed it (about 6 months ago), but others have observed that the latest service updates have integrated this functionality and the hotfix is not required. On IIS 7.5 and later I've not needed any patches for things to just work. Plan for non-ASP.NET Requests It's important to remember that if you write a .NET Module to run on IIS 7, there's no way for you to prevent non-ASP.NET requests from hitting your module. So make sure you plan to support requests to extensionless URLs, to static resources like files. Luckily ASP.NET creates a full Request and full Response object for you for non ASP.NET content. So even for static files and even for ASP classic for example, you can look at Request.FilePath or Request.ContentType (in post handler pipeline events) to determine what content you are dealing with. As always with Module design make sure you check for the conditions in your code that make the module applicable and if a filter fails immediately exit - minimize the code that runs if your module doesn't need to process the request.© Rick Strahl, West Wind Technologies, 2005-2012Posted in IIS7 ASP.NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Install NPM Packages Automatically for Node.js on Windows Azure Web Site

- by Shaun

In one of my previous post I described and demonstrated how to use NPM packages in Node.js and Windows Azure Web Site (WAWS). In that post I used NPM command to install packages, and then use Git for Windows to commit my changes and sync them to WAWS git repository. Then WAWS will trigger a new deployment to host my Node.js application. Someone may notice that, a NPM package may contains many files and could be a little bit huge. For example, the “azure” package, which is the Windows Azure SDK for Node.js, is about 6MB. Another popular package “express”, which is a rich MVC framework for Node.js, is about 1MB. When I firstly push my codes to Windows Azure, all of them must be uploaded to the cloud. Is that possible to let Windows Azure download and install these packages for us? In this post, I will introduce how to make WAWS install all required packages for us when deploying. Let’s Start with Demo Demo is most straightforward. Let’s create a new WAWS and clone it to my local disk. Drag the folder into Git for Windows so that it can help us commit and push. Please refer to this post if you are not familiar with how to use Windows Azure Web Site, Git deployment, git clone and Git for Windows. And then open a command windows and install a package in our code folder. Let’s say I want to install “express”. And then created a new Node.js file named “server.js” and pasted the code as below. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: console.log("Web application opened."); 9: app.listen(process.env.PORT); If we switch to Git for Windows right now we will find that it detected the changes we made, which includes the “server.js” and all files under “node_modules” folder. What we need to upload should only be our source code, but the huge package files also have to be uploaded as well. Now I will show you how to exclude them and let Windows Azure install the package on the cloud. First we need to add a special file named “.gitignore”. It seems cannot be done directly from the file explorer since this file only contains extension name. So we need to do it from command line. Navigate to the local repository folder and execute the command below to create an empty file named “.gitignore”. If the command windows asked for input just press Enter. 1: echo > .gitignore Now open this file and copy the content below and save. 1: node_modules Now if we switch to Git for Windows we will found that the packages under the “node_modules” were not in the change list. So now if we commit and push, the “express” packages will not be uploaded to Windows Azure. Second, let’s tell Windows Azure which packages it needs to install when deploying. Create another file named “package.json” and copy the content below into that file and save. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*" 6: } 7: } Now back to Git for Windows, commit our changes and push it to WAWS. Then let’s open the WAWS in developer portal, we will see that there’s a new deployment finished. Click the arrow right side of this deployment we can see how WAWS handle this deployment. Especially we can find WAWS executed NPM. And if we opened the log we can review what command WAWS executed to install the packages and the installation output messages. As you can see WAWS installed “express” for me from the cloud side, so that I don’t need to upload the whole bunch of the package to Azure. Open this website and we can see the result, which proved the “express” had been installed successfully. What’s Happened Under the Hood Now let’s explain a bit on what the “.gitignore” and “package.json” mean. The “.gitignore” is an ignore configuration file for git repository. All files and folders listed in the “.gitignore” will be skipped from git push. In the example below I copied “node_modules” into this file in my local repository. This means, do not track and upload all files under the “node_modules” folder. So by using “.gitignore” I skipped all packages from uploading to Windows Azure. “.gitignore” can contain files, folders. It can also contain the files and folders that we do NOT want to ignore. In the next section we will see how to use the un-ignore syntax to make the SQL package included. The “package.json” file is the package definition file for Node.js application. We can define the application name, version, description, author, etc. information in it in JSON format. And we can also put the dependent packages as well, to indicate which packages this Node.js application is needed. In WAWS, name and version is necessary. And when a deployment happened, WAWS will look into this file, find the dependent packages, execute the NPM command to install them one by one. So in the demo above I copied “express” into this file so that WAWS will install it for me automatically. I updated the dependencies section of the “package.json” file manually. But this can be done partially automatically. If we have a valid “package.json” in our local repository, then when we are going to install some packages we can specify “--save” parameter in “npm install” command, so that NPM will help us upgrade the dependencies part. For example, when I wanted to install “azure” package I should execute the command as below. Note that I added “--save” with the command. 1: npm install azure --save Once it finished my “package.json” will be updated automatically. Each dependent packages will be presented here. The JSON key is the package name while the value is the version range. Below is a brief list of the version range format. For more information about the “package.json” please refer here. Format Description Example version Must match the version exactly. "azure": "0.6.7" >=version Must be equal or great than the version. "azure": ">0.6.0" 1.2.x The version number must start with the supplied digits, but any digit may be used in place of the x. "azure": "0.6.x" ~version The version must be at least as high as the range, and it must be less than the next major revision above the range. "azure": "~0.6.7" * Matches any version. "azure": "*" And WAWS will install the proper version of the packages based on what you defined here. The process of WAWS git deployment and NPM installation would be like this. But Some Packages… As we know, when we specified the dependencies in “package.json” WAWS will download and install them on the cloud. For most of packages it works very well. But there are some special packages may not work. This means, if the package installation needs some special environment restraints it might be failed. For example, the SQL Server Driver for Node.js package needs “node-gyp”, Python and C++ 2010 installed on the target machine during the NPM installation. If we just put the “msnodesql” in “package.json” file and push it to WAWS, the deployment will be failed since there’s no “node-gyp”, Python and C++ 2010 in the WAWS virtual machine. For example, the “server.js” file. 1: var express = require("express"); 2: var app = express(); 3: 4: app.get("/", function(req, res) { 5: res.send("Hello Node.js and Express."); 6: }); 7: 8: var sql = require("msnodesql"); 9: var connectionString = "Driver={SQL Server Native Client 10.0};Server=tcp:tqy4c0isfr.database.windows.net,1433;Database=msteched2012;Uid=shaunxu@tqy4c0isfr;Pwd=P@ssw0rd123;Encrypt=yes;Connection Timeout=30;"; 10: app.get("/sql", function (req, res) { 11: sql.open(connectionString, function (err, conn) { 12: if (err) { 13: console.log(err); 14: res.send(500, "Cannot open connection."); 15: } 16: else { 17: conn.queryRaw("SELECT * FROM [Resource]", function (err, results) { 18: if (err) { 19: console.log(err); 20: res.send(500, "Cannot retrieve records."); 21: } 22: else { 23: res.json(results); 24: } 25: }); 26: } 27: }); 28: }); 29: 30: console.log("Web application opened."); 31: app.listen(process.env.PORT); The “package.json” file. 1: { 2: "name": "npmdemo", 3: "version": "1.0.0", 4: "dependencies": { 5: "express": "*", 6: "msnodesql": "*" 7: } 8: } And it failed to deploy to WAWS. From the NPM log we can see it’s because “msnodesql” cannot be installed on WAWS. The solution is, in “.gitignore” file we should ignore all packages except the “msnodesql”, and upload the package by ourselves. This can be done by use the content as below. We firstly un-ignored the “node_modules” folder. And then we ignored all sub folders but need git to check each sub folders. And then we un-ignore one of the sub folders named “msnodesql” which is the SQL Server Node.js Driver. 1: !node_modules/ 2: 3: node_modules/* 4: !node_modules/msnodesql For more information about the syntax of “.gitignore” please refer to this thread. Now if we go to Git for Windows we will find the “msnodesql” was included in the uncommitted set while “express” was not. I also need remove the dependency of “msnodesql” from “package.json”. Commit and push to WAWS. Now we can see the deployment successfully done. And then we can use the Windows Azure SQL Database from our Node.js application through the “msnodesql” package we uploaded. Summary In this post I demonstrated how to leverage the deployment process of Windows Azure Web Site to install NPM packages during the publish action. With the “.gitignore” and “package.json” file we can ignore the dependent packages from our Node.js and let Windows Azure Web Site download and install them while deployed. For some special packages that cannot be installed by Windows Azure Web Site, such as “msnodesql”, we can put them into the publish payload as well. With the combination of Windows Azure Web Site, Node.js and NPM it makes even more easy and quick for us to develop and deploy our Node.js application to the cloud. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

CodePlex Daily Summary for Friday, June 08, 2012

CodePlex Daily Summary for Friday, June 08, 2012Popular ReleasesMy Google Workspace: Google Workspace 1.0.0: Useful Google Search workspace that includes web-browsing and applitions access Download it to see it in action, please take a look and let me know your feedback Thanks!Tweetz - Windows Twitter Client Gadget: tweetz 3.1.5.8: Fixes bug where Ctrl+Shift+S sends a tweet when only Ctrl+S should send the tweet.C++ AMP Conformance Test Suite: C++ AMP Conformance Test Suite 0.99.0: Initial release of the C++ AMP Conformance Test Suite.Audio Pitch & Shift: Audio Pitch And Shift 4.5.0: Added Instruments tab for modules Open folder content feature Some bug fixesLINQ to Twitter: LINQ to Twitter Beta v2.0.26: Supports .NET 3.5, .NET 4.0, Silverlight 4.0, Windows Phone 7.1, Client Profile, and Windows 8. 100% Twitter API coverage. Also available via NuGet! Follow @JoeMayo.Python Tools for Visual Studio: 1.5 Beta 1: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports CPython, IronPython, Jython and PyPy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging •...Circuit Diagram: Circuit Diagram 2.0 Beta 1: New in this release: Automatically flip components when placing Delete components using keyboard delete key Resize document Document properties window Print document Recent files list Confirm when exiting with unsaved changes Thumbnail previews in Windows Explorer for CDDX files Show shortcut keys in toolbox Highlight selected item in toolbox Zoom using mouse scroll wheel while holding down ctrl key Plugin support for: Custom export formats Custom import formats Open...Umbraco CMS: Umbraco CMS 5.2 Beta: The future of Umbracov5 represents the future architecture of Umbraco, so please be aware that while it's technically superior to v4 it's not yet on a par feature or performance-wise. What's new? For full details see our http://progress.umbraco.org task tracking page showing all items complete for 5.2. In a nutshellPackage Builder Starter Kits Dynamic Extension Methods Querying / IsHelpers Friendly alt template URLs Localization Various bug fixes / performance enhancements Gett...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0.5: JayData is a unified data access library for JavaScript developers to query and update data from different sources like WebSQL, IndexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video New features in JayData 1.0.5http://jaydata.org/blog/jaydata-1.0.5-is-here-with-authentication-support-and-more http://jaydata.org/blog/release-notes Sencha Touch 2 module (read-only)This module can be used to bind data retrieved by JayData to Sencha Touch 2 generated user interface. (exam...32feet.NET: 3.5: This version changes the 32feet.NET library (both desktop and NETCF) to use .NET Framework version 3.5. Previously we compiled for .NET v2.0. There are no code changes from our version 3.4. See the 3.4 release for more information. Changes due to compiling for .NET 3.5Applications should be changed to use NET/NETCF v3.5. Removal of class InTheHand.Net.Bluetooth.AsyncCompletedEventArgs, which we provided on NETCF. We now just use the standard .NET System.ComponentModel.AsyncCompletedEvent...DotNetNuke® Links: 06.02.01: Added new DNN 6.2.0 beta social feature "friends" BugfixesApplication Architecture Guidelines: Application Architecture Guidelines 3.0.7: 3.0.7Jolt Environment: Jolt v2 Stable: Many new features. Follow development here for more information: http://www.rune-server.org/runescape-development/rs-503-client-server/projects/298763-jolt-environment-v2.html Setup instructions in downloadSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.5): New fetures:Multilingual Support Max users property in Standings Web Part Games time zone change (UTC +1) bug fix - Version 1.4 locking problem http://euro2012.codeplex.com/discussions/358262 bug fix - Field Title not found (v.1.3) German SP http://euro2012.codeplex.com/discussions/358189#post844228 Bug fix - Access is denied.for users with contribute rights Bug fix - Installing on non-English version of SharePoint Bug fix - Title Rules Installing SharePoint Euro 2012 PredictorSharePoint E...xNet: xNet 2.1.1: Release xNet 2.1.1Command Line Parser Library: 1.9.2.4 stable: This is the first stable of 1.9.* branch. Added tests for HelpText::AutoBuild. Fixed minor formatting error in HelpText::DefaultParsingErrorsHandler.myManga: myManga v1.0.0.4: ChangeLogUpdating from Previous Version: Extract contents of Release - myManga v1.0.0.4.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllMVVM Light Toolkit: V4RC (binaries only) including Windows 8 RP: This package contains all the latest DLLs for MVVM Light V4 RC. It includes the DLLs for Windows 8 Release Preview. An updated Nuget package is also available at http://nuget.org/packages/MvvmLightLibsPreviewExtAspNet: ExtAspNet v3.1.7: +2012-06-03 v3.1.7 -?????????BUG，??????RadioButtonList?，AJAX????????BUG（swtseaman、????）。 +?Grid?BoundField、HyperLinkField、LinkButtonField、WindowField??HtmlEncode?HtmlEncodeFormatString（TiDi）。 -HtmlEncode?HtmlEncodeFormatString??????true，??????HTML????????。 -??????Asp.Net??GridView?BoundField?????????。 -http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.boundfield.htmlencode -?Grid?HyperLinkField、WindowField??UrlEncode??，????URL??（???true）。 -?????????????，?????????????...LiveChat Starter Kit: LCSK v1.5.2: New features: Visitor location (City - Country) from geo-location Pass configuration via javascript for the chat box New visitor identification (no more using the IP address as visitor identification) To update from 1.5.1 Run the /src/1.5.2-sql-updates.txt SQL script to update your database tables. If you have it installed via NuGet, simply update your package and the file will be included so you can run the update script. New installation The easiest way to add LCSK to your app is by...New ProjectsAFSAspnetHandyAppTry: ddddddBlackrain Engine: A real-time rendering, game/cinematic engine.codeplexbsso: codeplexbsso?????codesmith template for DbEntry.Net: codesmith template for DbEntry.NetDevTeamsUnse: Proyecto de software para crear un sistema de gestion para una bibliotecaErrordite Client: Client libraries for Errordite Errordite is a simple plug-in for any .net application that will log details of exceptions generated by your application. Errordite will group together errors that are the same, either automatically or with rules you define. You then decide how to progress with the errors. You can investigate them, request to ignore them or put them on hold while you have more pressing concerns. For further information and to sign up for the beta, please visit http://ww...Expense Tracker V2: Asp.net site to manage expenses on a daily basis.Experiment N-Layer Project: The goal of this project to build a deal application using microsoft nlayer sample project. Goal is to build a complete application with proper documentation. More to add...GoMusicNow Downloader: This is a simple application created to make things a little easier when downloading a whole album worth of mp3s from the gomusicnow.com web site. To use, simply add your gomusicnow username and password, choose a local folder to download the mp3s to, then paste the url of the gomusicnow 'links' page, for the album you have purchased. Once you hit start, the files will be downloaded sequentially. This application is my first windows application, and first time using WPF. Therefore, I ca...Help A Lot(HAL): Dll to help in the developementHospital: The hospital project is built for my dad's hospital in India. The version one's features to be implemented are: 1. Add or edit patient (Deadline: 6/10/2012) 2. Add or edit medical history of a patient 3. Add or edit patient visit 4. Search existing patients 5. Print discharge reportinControl: Basic Inv ControlLongNile_Projects: Mobile devices projectsNucleo Mobile Detection: This project wraps around Wireless Universal Resource FiLe (WURFL) and provides added server-side mobile detection features for ASP.NET web forms and ASP.NET MVC. It provides controls/helpers and extension methods that make device detection support much easier. It also provides some mobile simulation capabilities for testing purposes.Physical Quantities: This library represents all physical quantities, units of measures, unit systems and unit conversions, as stated in different sources, but mainly on Wikipedia.Proyecto cuarto a: este trabajo es de prueba en codeplex 4to Apython otp: an hmac-based one-time password algorithmRadiation IM: This project aims to create a secure IRC like client (in the main ideas). But it brings a lot of new ideas and makes it a quite good place to discuss and share things. In security.RULI Chain Code Image Generator: RULICCimageGeneratorSharePoint 2010 - Selected items export to excel: Out of the box export to excel feature allows to export the complete view, and not the selected items. In order to achieve the functionality of exporting only selected items to excel.social media solidario: Se trata de desarrollar una aplicación web para escritorio y móvil que ofrezca la posibilidad de que expertos en social media puedan compartir su conocimiento en este área con las ONG , se trata de que respondan las preguntas que las ONG formulen y que todo ese conocimiento quede clasificado y a disposición de todosStarfish: Planning and organisation app for Pilates instructors.testddgit060720121: cxvtestddgit060720122: gftestddhg060720121: ,ktestddtfs060720122: cxvtesttom06072012git01: dsadstesttom06072012hg01: fdstitle: lo mejorWii Game Maker: Wii Game Maker is a program made in VB.NET that was made to allow people with little to no programming experience make their Wii ideas into reality.WoJiudeProject: WoJiudeProjectWpf localization without compile: Localization without recompiling, use it to localize your app. (Including xaml support).zzz: zzz

Read the article

CodePlex Daily Summary for Monday, March 26, 2012

CodePlex Daily Summary for Monday, March 26, 2012Popular ReleasesQuick Performance Monitor: Version 1.8.1: Added option to set main window to be 'Always On Top'. Use context (right-click) menu on graph to toggle..Net Rest API for Kayako Fusion 4: kayako_rest_api_2012.03.26: Added ability to search for users via organisation/email. This is much quicker than getting all users then filtering.GeoMedia PostGIS data server: PostGIS GDO 1.0.1.1: This is a new version of GeoMeda PostGIS data server which supports user rights. It means that only those feature classes, which the current user has rights to select, are visible in GeoMedia. Issues fixed in this release Fixed a problem when gdo.gfeaturesbase table has been visible in GeoMedia. To hide this table, run the previous version of Database Utilities and uncheck this table in the feature classes list. Then load the new release. Fixed a problem when coordinate system list has not...Silverlight 4 & 5 Persian DatePicker: Silverlight 4 and 5 Persian DatePicker: Added Silverlight 5 support.Y.Music: Y.Music v.1.0: ?????? ?????? ?????????. ????????: ????? ???? ????, ??????? ?????? ? ??? - Beta.Asp.NET Url Router: v1.0: build for .net 2.0 and .net 4.0menu4web: menu4web 0.0.3: menu4web 0.0.3ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Final: This release installs both the ArcGIS Editor for OSM Server Component and/or ArcGIS Editor for OSM Desktop components. The Desktop tools allow you to download data from the OpenStreetMap servers and store it locally in a geodatabase. You can then use the familiar editing environment of ArcGIS Desktop to create, modify, or delete data. Once you are done editing, you can post back the edit changes to OSM to make them available to all OSM users. The Server Component allows you to quickly create...Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...XNA Electric Effect: Jason Electric Effect v1.1: The library now includes 3 effect types: Line, Bezier, CatmullRom, providing different look and feel.DotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Change default Share-site group SharePoint Online (Office 365): Change default Share-site group SharePoint Online: As default when we share a site collection or site with external users, SharePoint Online show default SharePoint groups which are Visitors and Members. By using this feature, you will get a link which you can use to customize the default groups to your custom groups and other default groups.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.Working with Social Data: Tag Cloud Customization: http://swatipoint.blogspot.com/2011/10/sharepoint-2010-social-featurestagging.htmlWebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...New ProjectsASIVeste: No description availableAuthor-it Sync Headings Plug-in: Author-it plug-in that allows the user to synchronize the Print, Help, and Web headings with the Description for each selected topic.BlogEngine.Web: BlogEngine.Web is a BlogEngine.Net converted to use Web Application Project model (WAP).Code Writer Helper: A quick solution to help code generator writers.CodeUITest: Practise CodeUI automation.DAX Studio: Excel Add-In for PowerPivot and Analysis Services Tabular projects that will include an Object Browser, query editing and execution, formula and measure editing ,syntax highlighting, integrated tracing and query execution breakdowns.Fated: Fated is an isometric-viewed, tile-based tactical RPG developed in C# using XNA to be deployed to XBox. This includes a character generation core, graphics engine, and storyline parser.iSufe???: “iSufe???”??????????????????????????????。???????????、????、?????????，??????????????。??，????iOS/Android/WAP???????，???????????????。????GPLv2??，?????????????。Kinect test project: Basic project for my kinect test applicationLoLTimers: LoLTimers by Christian Schubert 2012. Version 1.0.0.0 This is a small app that lets you keep track of the most important creep camp cooldowns. Developed in Visual Studio C#.London Priority Security Services Ltd: LPSS - London Priority Security Services LtdNMCNPM: code nhóm nmcnpmOffice 365 Anonymous Access Manager Sandbox Solution: The sandbox solution enables you to manage anonymous access of lists on Office 365. It allows setting read, modifying and adding rights. Additionally the configuration page adds the necessary events to be able to use moderations, when anonymous users are creating a list item. The second feature in the solution enables anonymous access on blogs sites, it allows to enable anonymous users to comment on a blog.Office 365 Google Analytics: This sandbox solution enables google analytics everywhere in your site collection. This allows you to use the google analytics reporting on all your Office 365 sites.Office 365 Mobile Access Enables for Public Sites & Blogs: This sandbox solution enables mobile access on Office 365 sites.OwnMFCSolution: MFC test solution.People Data Generator: Need to load a bunch of test data to represent people (e.g. name, address, phone, etc.)? Wish it looked realistic? People Data Generator is what you need. Features: *Realistic names *Realistic addresses, using real towns and postal codes *Realistic phone numbers and emails *Very ExtensibleProventi: Met dit programma kan je je voorraad van je onderneming beheren. Dit programma zal in eerste instantie gebruikt worden binnen de minionderneming Proventi. Het programma is geschreven in VB.Net en maakt gebruik van SQL Server CE voor de gegevensopslag.qCommerce: ??????????? ???????, ???????????? ??? ????? qSoftwareQuanLyOTo: Ð? án môn h?c C# qu?n lý garage ô tôRoyaSoft.ir Resources: i am use this project for my personal web site :)SGPF: The team does not have nothing to declare here!SharePoint 2010 Autocomplete Lookup Field: Autocomplete Lookup field allows type ahead functionality while entering lookup values in list items.Sharing Photos using SignalR: An MVC application using SignalR that can be used to share photos between friends and get realtime updates. An user connected to the website can upload a photo which will be automatically broadcasted to all clients connected at that point.Sistema Hoteleiro: Sistema Hoteleiro é o meu trabalho final da disciplina Arquitetura de Aplicativos Ambiente .NET da 4a turma do curso de pós-graduação de especialização em Arquitetura de Sistemas Distribuídos oferecido pelo Instituto de Educação Continuada da Pontifícia Universidade Católica de MSoftware Revolution: This project is core information site of Software Revolution named company which provides software solutions.tgryi: tgyrivbWSUS: Really decide which and when to install updates from a centralized server, globally or per host : - installation schedule - updates to install - email results - configure extra Windows Update parameters Works with WSUS server or Windows Update from Microsoft. See README.txt for more informations ! :) Current official website is http://sourceforge.net/projects/vbwsus/XamlCombine: Combines multiple XAML resource dictionaries in one. Replaces DynamicResources to StaticResources. And sort them in order of usage.XNA Shader-free Linear Burn effect: Sample demonstrating a Linear Burn effect in XNA without using custom shaderszhCms: zhCmszhtest: my test project

Read the article

Adopting Technologies for the Sake of Technologies

- by shiju

Unlike other engineering industries, the software engineering industry is really lacking maturity. The lack of maturity can see in different aspects of entire software development life cycle. I think other engineering industries are well organised and structured with common, proven engineering practices. The software engineering industry is greatly a diverse industry with different operating systems, and variety of development platforms, programming languages, frameworks and tools. Now these days, people are going behind the hypes and intellectual thoughts without understanding their core business problems and adopting technologies and practices for the sake of technologies and practices and simply becoming a “poster child” of technologies and practices. Understanding the core business problem and providing best, solid solution with a platform neutral approach, will give you more business values and ROI, instead of blindly adopting technologies and tailor-made your applications for the sake of technologies and practices. People have been simply migrating their solutions in favour of new technologies and different versions of frameworks without any business need. The “Pepsi Challenge” in the Software Development Pepsi Challenge marketing campaign of the 1980s was a popular and very interesting marketing promotion in which people taste one cup of Pepsi and another cup with Coca Cola. In the taste test, more than 50% of people were preferred Pepsi over Coca Cola. The success story behind the Pepsi was more sweetness contains in the Pepsi cola. They have simply added more sugar and more people preferred more sweet flavour. You can’t simply identify the better one after sipping one cup of cola based on the sweetness which contains. These things have been happening in the software industry for choosing development frameworks and technologies. People have been simply choosing frameworks based on the initial sugary feeling without understanding its core strengths and weakness. The sugary framework might be more harmful when you develop real-world systems. There is not any silver bullet for solving all kind of problems and frameworks and tools do have strengths and weakness. So it would be better to understand their strength and weakness. And please keep in mind that you have to develop real apps to understand the real capabilities and weakness of a framework. Evaluating a technology based on few blog posts will harm your projects and these bloggers might be lacking real-world experience with the framework. The Problem with Align a Development Practice with Tools Recently I have observed a discussion in a group where one guy asked suggestions for practicing Continuous Delivery (CD) as part of the agile based application engineering. Then the discussion quickly went to using and choosing a Continuous Integration (CI) tool and different people suggested different Continuous Integration (CI) tools for simply practicing Continuous Delivery. If you have worked with core agile engineering practices, you could clearly know that the real essence of agile is neither choosing a tool nor choosing a process. By simply choosing CI tool from a particular vendor will not ensure that you are delivering an evolving software based on customer feedback. You have to understand the real essence of a engineering practice and choose a right tool for practicing it instead of simply focus on a particular tool for a practicing an development practice. If you want to adopt a practice, you need a solid understanding on it with its real essence where tools are just helping us for better automation. Adopting New Technologies for the Sake of Technologies The another problem is that developers have been a tendency to adopt new technologies and simply migrating their existing apps to new technologies. It is okay if your existing system is having problem with a technology stack or or maintainability challenge with existing solution, and moving to new technology for solving the current problems. We have been adopting new technologies for solving new challenges like solving the scalability challenges when the application or user bases is growing unpredictably. Please keep in mind that all new technologies will become old after working with it for few years. The below Facebook status update of Janakiraman, expresses the attitude of a typical customer. For an example, Node.js is becoming a hottest buzzword in the software industry and many developers are trying to adopt Node.js for their apps. The important thing is that Node.js is a minimalist framework that does some great things for some problems, but it’s not a silver bullet. I have been also working with Node.js which is good for some problems, but really bad for choosing it for all kind of problems. By adopting new technologies for new projects is good if we could get real business values from it because newer framework would solve some existing well known problems and provide better solutions where it can incorporate good solutions for the latest challenges . But adopting a new technology for the sake of new technology is really bad idea. Another example is JavaScript is getting lot of attention so that lot of developers are developing heavy JavaScript centric web apps. First, they will adopt a client-side JavaScript MV* framework from AngularJS, Ember, Backbone etc, and develop a Single Page App(SPA) where they are repeating the mistakes we did in the past with server-side. The mistakes we did in the server-side is transforming to client-side. The problem is that people are just adopting new technologies, but not improving their solutions. I predict that many Single Page App will suck in the future. We need a hybrid approach where we should be able to leverage both server-side and client-side for developing next-generation web apps. The another problem is that if you like a particular framework, use it for all kind of apps. In the past, I know some Silverlight passionate guys were tried to use that framework for all kind of apps including larger line of business apps. And these days developers are migrating their existing Silverlight apps in favour of HTML5 buzzword. So the real question is, what is the business values we are getting from these apps when we are developing it for the sake of a particular technology instead of business need. The another problem is that our solutions consultants are trying to provide unnecessary solutions for the sake of a particular technology or for a hype. For an example, Big Data solutions are great for solving the problem of three Vs : volume, velocity and variety. But trying to put this for every application will make problems. Let’s say, there is a small web site running with limited budget and saying that we need a recommendation engine for the web site with a Hadoop based solution with a 16 node cluster, would be really horrible. If we really need a Hadoop based solution, got for it, but trying to put this for all application would be a big disaster. It would be great if could understand the core business problems first, and later choose a right framework for providing solutions for the actual business problem, instead of trying to provide so many solutions. The Problem with Tied Up to a Platform Vendor Some organizations and teams are tied up with a particular platform vendor where they don’t want to use any product other than their preferred or existing platform vendor. They will accept any product provided by the vendor regardless of its capability. This will lets you some benefits regards with integration and collaboration of different products provided by the same vendor, but it will loose your opportunity to provide better solution for your business problems. For a real world sample scenario, lot of companies have been using SAP for their ERP solutions. When they are thinking about mobility or thinking about developing hybrid mobile apps, they can easily find out a framework from SAP. SAP provides a framework for HTML 5 based UI development named SAPUI5. If you are simply adopting that framework only based for the preference of existing platform vendor, you might be loose different opportunities for providing better solution. Initially you might enjoy the sugary feeling provided by the platform vendor, but you have to think about developing apps which should be capable for solving future challenges. I am not saying that any framework is not good and I believe that all frameworks are good over another one for solving at least one problem. My point is that we should not tied up with any specific platform vendor unless your organization is having resource availability problems. Being Polyglot for Providing Right Solutions The modern software engineering industry is greatly diverse with different tools and platforms. Lot of open source frameworks and new programming languages have been releasing to the developer community, where choosing the right platform without any biased opinion, is really a difficult task. But it would really great if we could develop an attitude with platform neutral mindset and being a polyglot developer for providing better solutions based on the actual business problems. IMHO, we should learn a new programming language and a new framework every year. This will improve the quality of our developer capabilities and also improve the quality of our primary programming language skills. Being polyglot for individual developers and organizational teams will give you greater opportunity to your developer experience and also for your applications. Organizations can analyse their business problem without tied with any technology and later they can provide solutions by choosing different platform and tools. Summary In this blog post, what I was trying to say that we should not tied up or biased with any development platform, technology, vendor or programming language and we should not adopt technologies and practices for the sake of technologies. If we are adopting a technology or a practice for the sake of it, we are simply becoming a “poster child” of the technology and practice. We should not become a poster child of other people’s intellectual thoughts and theories, instead of it we should become solutions developers and solutions consultants where we should be able to provide better solutions for the business problems. Being a polyglot developer is a good idea for improving your developer skills which lets you provide better solutions for the business problems. The most important thing is that we should become platform neutral developers where our passion should be for providing brilliant solutions. It would be great if we could provide minimalist, pragmatic business solutions. You can follow me on Twitter @shijucv

Search Results

Search found 17249 results on 690 pages for 'resource management'.

Page 661/690 | < Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668 | Next Page >

- by Grant Fritchey

- by Shaun

- by albertpascual

- by Andy Little

- by AndyL-Oracle

- by Alois Kraus

- by Scott Dorman

- by Jon Galloway

- by jamiet

- by nikolaosk

- by JuergenKress

- by Roger Brinkley

- by Ajarn Mark Caldwell

- by marc dekeyser

- by Rick Strahl

- by Shaun

- by shiju

< Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668 | Next Page >