Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 662/1173 | < Previous Page | 658 659 660 661 662 663 664 665 666 667 668 669  | Next Page >

• CPU I/O communication

  - by b-gen-jack-o-neill

  Hi, I know there is this question already discussed, but I still don´t understand something, so please just help me clarify it. What I understand there is 2 way to do I/O aka communicate from CPU with other HW. One is to use in and out instructions, and second is the memory mapped. But what I don´t actually understand is, is IN and OUT instructions are used, you define source port. But what is this port? I mean, is it different set of pins on CPU or what? And, to what is that port connected? And for the memory mapped, I miss just a tiny detail. Wheather memory mapped I/O must be first set by IN and OUT instructions, or does the device actually somehow itself connects to the RAM and reads it? Thanks.

  Read the article

• Stream Music To Ventrilo From ESXi VM

  - by omghai2u

  I would like to stream music to my Ventrilo server from a Windows XP virtual machine running on an ESXi host. I have followed the instructions outlined here to stream music from something like VLC to the Ventrilo server on another machine and it works fine. I have also added the lines: sound.present = "TRUE" sound.virtualDev = "es1371" sound.fileName = "-1" sound.autodetect = "TRUE" to my .vmx file, as suggested here (http://communities.vmware.com/thread/191878), to get a sound card in my VM. The problem I am having is that it seems that my VM is not outputting any sound, so there's nothing to stream through Ventrilo. The Device Manager on the VM shows that this new sound card has drivers and doesn't appear to have any concerns with it. Can someone point me in the right direction to get my desired outcome? Thanks! PS. sorry for the long 2nd link, apparently I can only post 1 hyperlink with this low reputation.

  Read the article

• wi-fi connection drops periodically for a few seconds

  - by sergiom

  I've read the similar question on wireless connections dropping, but no answer seems to apply to my case I have configured the wi-fi lan of my router to broadcast sid and use WPA-PSK. Every few minutes my wi-fi connection drops for a few seconds and then restores. When I use two computers and run a ping -n 50000 on both computers, I see that the connection drops at different times but with almost the same rate. the router is a zyxel, one pc runs windws vista and uses a USB wi-fi device from Belkin: F6D4050 the other one runs windows 7 is a Dell PC with an Intel(R) WiFi Link 5100 AGN there are no other wi-fi lans around

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• Intel Server Board S3420GP fails to boot with video connected

  - by Riley

  All, Building a new system using an Intel Server Board S3420GP motherboard and an Intel Xeon X3440 processor. Before installing this motherboard into the chassis we want to test that it will actually boot correctly. We have mounted the processor and RAM with no hard drives attached. The boot sequence differs between the next variable: 1) Connecting video results in the system fans ramp up and down, twice, and then the system beeps with the same behavior repeating; the system status light shows "Amber" 2) With no video, the system goes through POST and the diag LEDs show that the system is missing a bootable device Need some assistance identifying why the board would fail to POST with video connected. // Update // Using another Power Supply the system gets passed the fans ramping up and down twice. Video still does not display.

  Read the article

• Can not boot CentOS VM using VirtIO in KVM

  - by Jake

  I converted qcow2 image to raw and changed I/O bus to VirtIO for a VM. now I can't boot that VM. I Installed VirtIO driver with following command: mkinitrd --with virtio_pci --with virtio_blk -f /boot/initrd-$(uname -r).img $(uname -r) and these are related kernel modules: virtio_balloon 11329 0 virtio_blk 11593 3 virtio_pci 11845 0 virtio_ring 8513 1 virtio_pci virtio 9541 3 virtio_balloon,virtio_blk,virtio_pci and this is what happens during boot-up. I also changed /boot/grub/device.map from "(hd0) /dev/sda" to "(hd0) /dev/vda" but problem still exists. any ideas how to fix this ? This is my default option to boot: title CentOS (2.6.18-308.13.1.el5) root (hd0,0) kernel /vmlinuz-2.6.18-308.13.1.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-308.13.1.el5.img

  Read the article

• Dell laptop doesn't wake from hibernation after installing Windows 8.1

  - by Mike Cole

  My laptop worked flawlessly before upgrade to Windows 8.1 from 8. Now when I close the lid of my laptop and it goes into hibernation, it will not wake again. The LED lights seem to work properly but I don't get any video. I have to hold the power key to turn off then turn it back on again. It wakes from sleep properly. All Windows Updates have been installed. There are 2-3 items in the Device Manager that do not have compatible 8.1 drivers, but I believe those are security related items like fingerprint scanner.

  Read the article

• Site to site VPN using RRAS from an untrusted network?

  - by DrZaiusApeLord

  Our remote office will be moving to a new space where internet will be provided. They'll be behind a router doing NAT (I do not have admin rights to this router). They will be sharing a printer with the other people on the LAN, but will need VPN to our network for email and file shares. I was thinking of just having them run the windows VPN client and connecting via PPTP like they do when they are off-site, but I have read that multiple PPTP connections from the same NAT'd address to the same destination doesn't work well or at all. I am thinking some kind of site-to-site VPN is needed so there is just one tunnel. Can I just put in a VPN gateway, set it to connect to our RRAS/PPTP server, and have them use it as their default gateway? Perhaps even use the local default gateway for internet traffic. If so, what VPN gateway/device is recommended for this? Or other solutions? Thanks.

  Read the article

• VPN and Bonjour conflicting

  - by JW.

  Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

  Read the article

• SQL Server 2008 lincensing question relating to web servers

  - by Matty Brown

  We purchased SQL Server 2008 Standard licences last year under the server + device CAL licencing model. Since our server has 2 physical CPUs and only 46 clients, this option was by far the cheapest. Now we'd like to be able to query a small number of stored procedures from our Windows Server 2003 Web Edition server, which is in a seperate zone on our firewall. I think SQL Server 2008 Web Edition could be an option to us, but is it possible to replicate/mirror stored procedures and tables to such a server and would we be breaking any rules by doing so? Is this a form of multiplexing? Also, would replication/mirroring work both ways, if we were to want to write back data from the web server?

  Read the article

• Windows XP waits for usb drive on almost every operation.

  - by Tomasz Kowalczyk

  Hello everyone, I have a problem with my Windows XP operating system, particularly with the USB device that is plugged in - 1TB WD My Book external drive. I haven't found any information about such behaviour when searching in Internet, so I have to ask You. The problem is: when I am using computer, especially during work (programming), when I try to access any information on a hard disk ("internal" one), Windows seems to "consult" it with the external drive. For example, when I open file selection dialog window, if I try to change directory, system activates external drive, reads something (I hear the disk's operational noise) and after some seconds of such pause it makes the operations I requested. There are many situations in which I can reproduce this behavior - opening My Computer, shutting down system, opening partition folder from My Computer - every operation involves the usage of external drive. Please understand me properly - this is not something that happens EVERY time, but at least "many" times a day. What causes such behavior and how can I "turn off" external drive when it's not needed? Thanks in advance for your answers.

  Read the article

• How can I recover [data from] my failing USB key?

  - by moe37x3

  I have a Corsair Flash Voyager USB key, and it's almost completely failed. When I plug it into my [WinXP] computer, the OS mounts it and open up explorer to the drive's root directory. However, if I try to copy any data off, I get an error message saying that the device is not there. If I leave it plugged in, the OS seems to oscillate between seeing it and not seeing it, since the "Safely Remove Hardware" tray icon appears and disappears every few seconds. The damage was probably caused by my abuse, either from plugging it in with my keys hanging off of it or from losing the cap and keeping it in my pocket uncapped. Is there anything I can do to save the data from it or even rehabilitate the drive?

  Read the article

• How to use Ralink RT2501/RT2573 as wifi access point in Debian Linux

  - by user60813

  Hi, I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable. I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that. I have tried installed wicd, but it does not help. I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff. So my question is: How do I set up this USB wifi card as wireless access point in Debian Lenny?

  Read the article

• Disable MOUSE wakeup when doing suspend on UBUNTU

  - by Shadyabhi

  When I do SUSPEND on ubuntu, in order to wake up, i can just move the mouse and the computer will wake up. But, I dont want that the computer is waked up when I move my mouse. How can I do that? My /proc/acpi/wakeup file:- shadyabhi@shadyabhi-desktop:~$ cat /proc/acpi/wakeup Device S-state Status Sysfs node SLPB S4 *enabled P32 S4 disabled pci:0000:00:1e.0 UAR1 S4 disabled pnp:00:09 ILAN S4 disabled pci:0000:00:19.0 PEGP S4 disabled PEX0 S4 disabled pci:0000:00:1c.0 PEX1 S4 disabled pci:0000:00:1c.1 PEX2 S4 disabled pci:0000:00:1c.2 PEX3 S4 disabled pci:0000:00:1c.3 PEX4 S4 disabled pci:0000:00:1c.4 PEX5 S4 disabled UHC1 S3 disabled pci:0000:00:1d.0 UHC2 S3 disabled pci:0000:00:1d.1 UHC3 S3 disabled pci:0000:00:1d.2 UHC4 S3 disabled EHCI S3 disabled pci:0000:00:1d.7 EHC2 S3 disabled pci:0000:00:1a.7 UH42 S3 disabled pci:0000:00:1a.0 UHC5 S3 disabled pci:0000:00:1a.1 UHC6 S3 disabled pci:0000:00:1a.2 AZAL S3 disabled pci:0000:00:1b.0 shadyabhi@shadyabhi-desktop:~$

  Read the article

• iTunes sees my iPhone, but Windows 7 x64 doesn't

  - by Herb Caudill

  After reinstalling Windows 7 (64-bit), it has stopped recognizing my iPhone. I can see it in iTunes but not in Windows Explorer, so I can't get the photos off. I'm having this problem on three different machines and two different iPhones (my wife's and mine). It's maddening. I've had every version of iPhone since it first came out and I've never had this problem before. I've uninstalled and reinstalled iTunes (currently at 10.2.1.1). I've updated iOS on the phone (currently at 4.3). In the device manager, this is what I see: Here's the properties screen for the unrecognized iPhone: And here's what I get after going through the "update driver" process: Any ideas? At the end of my rope here...

  Read the article

• How to troubleshoot a service failure?

  - by AngryHacker

  I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

  Read the article

• Why is my eth0 getting a dynamic ip when it is configured to be static?

  - by sdek

  For some reason our office linux box is being assigned an ip address via dhcp and I don't know why. What is confusing to me is that when I check system-config-network it shows that my eth0 is setup to be a static ip address. And /etc/sysconfig/network-scripts/ifcfg-eth0 also shows it is setup to be a static ip, yet it is getting a different ip address than the one specified in the ifcfg-eth0. Let me know if you have any suggestions on or ideas on where I can look next. Here are a few details that might help you figure out what an idiot I am :) Fedora 11 Router in front of this box is running dhcp, starting at 10.42.1.100 This box is configured to be 10.42.1.50 (at least I think it is!), subnet 255.255.255.0 (which is same as the router's lan subnet) Instead of having the static IP, this box is getting assigned 10.42.1.100. Here are the ifcfg-eth0 details DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no NM_CONTROLLED=no NETMASK=255.255.255.0 IPADDR=10.42.1.50 GATEWAY=10.42.1.1

  Read the article

• Any way to know if two ip address points to the same machine?

  - by Vivek V K

  Is there anyway to find if two different IP address in two different network actually points to the same physical device? I need it in Linux. Edit - I have the same server(a raspberry pi) connected via 2 intranets to my client. I don't know the IP address of the server as it is DHCP. The crude way to do is to reach the raspberry pi from one intranet and check with ifconfig to find the ipadress of the machine in the other Intranet. I want to know if there is any other way I can do it? I know the mac address of the machine.But I don't know how do I find the Ipadress based on the mac address.

  Read the article

• Why does my computer slow down so much when attaching Bluetooth dongle?

  - by Jeff Yates

  I have a Bluetooth dongle and I plugged it into my work laptop (a Dell Latitude D830). Windows detects the Generic Bluetooth USB or similar and then proceeds to go incredibly slow with a process, avp.exe¹, taking 50% CPU. The System Idle process is getting most of the other 50% CPU and the avp.exe process is only at Normal priority. The machine doesn't seem to recover, so I had to turn the power off and reboot. Now, I haven't installed the drivers yet for the device, which I am doing now and I expect it to resolve the problem, so I am not asking how to fix this. I would rather know why Windows goes so slow in the first place. What is it trying to do and failing at so badly that it barely crawls? ¹ Part of Kaspersky Internet Security suite

  Read the article

• fedora liveUSB fails, drops to debug shell

  - by evan

  Trying to install Fedora 15 via a live USB made with unetbootin. I get to the unetbootin boot menu, select Fedora-15-x86_64-Live-Desktop.is, I get to this screen, then it drops into a debug shell with the message sh: can't access tty: job control turned off. The last message is dmseg is dracut Warning: No root device "live:/dev/disk/by-label/Fedora-15-Beta-x86_64-Live-Desktop.is" found. Seems to be the same problem detailed here. Tried to try nk1eto's solution but there is no by-label directory in /dev/disk. There's by-id, by-path and by-uuid.

  Read the article

• How to load tun module in linux?

  - by rabipelais

  I cannot manage to load the tun module in my archlinux box. I'm trying to connect with openvpn, but the log says nm-openvpn[6662]: Note: Cannot open TUN/TAP dev /dev/net/tun: No such device (errno=19) lsmod | grep tun returns nothing. If I run sudo modprobe tun it returns failure, but no error message, and lsmod still has no tun. The module seems to exist, as there is a tun.ko.gz in /lib/modules/....... I really dont know what else to try. Thanks in advance

  Read the article

• Is there anyway to build a raid system without all drives?

  - by xenoterracide

  I'm building a raid1 (ok it will probably be a raid10,f2 but the difference with 2 drives... isn't much) system with 2 1TB drives. However, 1 of the drives I've ordered is bad so I'm RMA-ing it. I'm wondering if I could partition and install to the 1 drive and then rebuild the array when I get the second drive (after I test it of course) My initial investigation doesn't show me a way of creating the array without specifying all devices... and the device the second drive will be is one that has data that I will need to migrate (plus it's not big enough). Is it possible that I could create an array without specifying all devices? or specify false ones and reconfigure to the right ones later? Or some other method I'm not thinking of.

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• Why is my ipad's wireless so flakey?

  - by Mark

  I'm the proud owner of a new IPad here in the UK. All is good, except for the wifi, which is a bit flakey. It connects fine to my Draytek router which is set for WPA/WPA2 and 56g only, displaying full signal strength. Then, after a few minutes, it goes down to minimum strength... And sometimes it goes back up again. A few times, it seems to loose connection completely, and needs to be turned off and on again. I've looked at the Apple support site, and have tried their recommendations (which are not really very relevant), but still nothing. I've tried setting the router to wpa2 only, and setting long-preamble. Right now, I guess I want to know if it's a hardware problem with my device and should be returned, or if it's a problem with all ipads which will be resolved. Guess I could take it back to the Mac genius bar, but I find those guys so incredibly pretentious and, frankly, rather useless, that i'd rather wait until I've exercised other options!

  Read the article

• Do SSD hybrid drives perform better than HDD + ReadyBoost flash?

  - by Chris W. Rea

  Seagate has released a product called the Momentus XT Solid State Hybrid Drive. This looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

  Read the article

< Previous Page | 658 659 660 661 662 663 664 665 666 667 668 669  | Next Page >