Search Results

Search found 40212 results on 1609 pages for 'hardware id'.

Page 662/1609 | < Previous Page | 658 659 660 661 662 663 664 665 666 667 668 669  | Next Page >

  • How do you force Ubuntu to unmount a disk when you press the eject button on an optical drive?

    - by Michael Curran
    When upgrading my hardware, I also upgraded to Ubuntu 10.10. On my previous system (with 10.04 and earlier) when I ejected a disk from the optical drive, the subfolder in the /media directory was automatically removed. In my new 10.10 system, if I don't eject the disk using the "eject" command within the system, the disk remains mounted, even after a new disk is installed. The new drive is a Blu Ray drive, but I haven't noticed any other problems from it. Normally, this isn't a problem, but it makes installing applications that are spread over multiple CDs more difficult in many cases (i.e. Wine). Any advice?

    Read the article

  • Traktor Audio 2 DJ soundcard configuration

    - by Jaroslav
    I have a Traktor Audio 2 DJ USB sound card (the first version of what it's now called simply Traktor Audio 2) The problem in settings it only sees one output, when there should be two (I need that for Mixxx etc.) Also I want to be able set the sample rate to one of these: 44.1, 48, 88.2, 96 kHz or at least check which one is set. Additionally if possible setting the latency would be an advantage. Some info: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: TraktorAudio2 [Traktor Audio 2], device 0: Traktor Audio 2 [Traktor Audio 2] Subdevices: 1/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 $ cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfdcfc000 irq 45 1 [TraktorAudio2 ]: snd-usb-caiaq - Traktor Audio 2 Native Instruments Traktor Audio 2 (usb-0000:00:1d.7-8)

    Read the article

  • TFS 2008 to TFS 2010 moves and some issues

    - by Enrique Lima
    There have been many things going on this year around TFS.  Most of them had to do with migrations (I don’t call them upgrades for the most part since it involved new hardware and such).  Many were implementations using the Conchango SfTS template (now EMC). But there were others that were CMMI or Agile 4.0. Everything would move just fine, no issues.  That was until you attempted to run Test Case Management or run the last configuration steps for Lab Management. There is an error that states a project is not ready to run or integrate with Test or Lab Management.  And while there was some documentation on how to adjust and update the Agile WITs to work with it, there was still some disconnect to making it work with CMMI. Now there is a great post on how to run the “fix” from end to end. Check the post here:  TFS 2010: Enable Test Case Management for upgraded Team Projects

    Read the article

  • #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

    - by Eric Bezille
    For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

    Read the article

  • Windows for IoT, continued

    - by Valter Minute
    Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

    Read the article

  • How can I avoid the random restart of the xserver?

    - by Bernd
    I'm using a desktop pc with 64bit Ubuntu 12.04 (Kernel 3.2.0-24-generic). Hardware specs are - Intel Core i7 CPU 860 @ 2,80GHz x 8 - Nvidia GeForce GTS 250 - 750 GB Hard Disk ATA WDC WD7501AALS-00E3A0 (for my /home partition) - 128 GB Solid-State Disk ATA PLEXTOR PX-128M2S (for all other partitions) Since I reinstalled the PC with Ubuntu 12.04 the xserver restarts randomly. Most times when I watch a video in the browser (maybe a flash issue?) but sometimes the restart/crash appears when I'm working in an text-editor. How can I locate the problem? Which information is needed for a useful answer?

    Read the article

  • sd card won't mount when an android phone is connected after 12.10 fresh install

    - by Mysterio
    I just upgraded to 12.10 via a fresh install. Mounting my Xperia Neo V in 12.04 worked flawlessly however I just discovered that the sd card can't be detected and mounted in 12.10. How can I solve this? Thanks in advance. P. S. I can mount it via a card reader though and it mounts ok in Windows 7. So it surely can't be hardware related. EDIT: Sony Ericsson Neo V running Android 2.3.4. USB mass storage is already turned on.

    Read the article

  • Oracle VM Moves into Challenger Position in the Latest Gartner Magic Quadrant

    - by Monica Kumar
    Oracle Innovations boost Oracle VM into Challenger Position in Gartner x86 Server Virtualization Infrastructure Magic Quadrant Oracle VM's placement in the just published Gartner x86 Server Virtualization Infrastructure Magic Quadrant affirms the Oracle strategy and is also supported by strong customer momentum gains. Optimizations delivered in Oracle VM releases during this last year along with easy software access and low cost licensing have moved Oracle’s placement into the Challenger quadrant in a very short time. Oracle continues to focus on delivering a strong integrated virtualization with Oracle VM and the managed stack in the following areas: Integrated management with Oracle VM and all layers of the Oracle stack from hardware to virtualization to cloud Application-Driven virtualization with Oracle VM templates for rapid enterprise application deployment Certified Oracle applications on Oracle VM Complete stack solution offering more values to customers Get a copy of the Magic Quadrant for x86 Server Virtualization Infrastructure report to read more about how Oracle VM rapidly moved up in its new position.

    Read the article

  • Is there any advantage in using DX10/11 for a 2D game?

    - by David Gouveia
    I'm not entirely familiar with the feature set introduced by DX10/11 class hardware. I'm vaguely familiar with the new stages added to the programmable graphics pipeline, such as the geometry shader, the compute shader, and the new tesselation stages. I don't see how any of these make much of a difference for a 2D game though. Is there any compelling reason to make the switch to DX10/11 (or the OpenGL equivalents) for a 2D game, or would it be wiser to stick with DX9 considering that that a significant share of the market still runs on older technologies (e.g. the February 2012 Steam surveys lists around 17% of users as still using Windows XP)?

    Read the article

  • What technologies are used for Game development now days?

    - by Monika Michael
    Whenever I ask a question about game development in an online forum I always get suggestions like learning line drawing algorithms, bit level image manipulation and video decompression etc. However looking at games like God of War 3, I find it hard to believe that these games could be developed using such low level techniques. The sheer awesomeness of such games defy any comprehensible(for me) programming methodology. Besides the gaming hardware is really a monster now days. So it stands to reason that the developers would work at a higher level of abstraction. What is the latest development methodology in the gaming industry? How is it that a team of 30-35 developers (of which most is management and marketing fluff) able to make such mind boggling games?

    Read the article

  • Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

    - by zewone
    I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686 ![Schizophrenic Ubuntu](http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

    Read the article

  • Infrared usb adapter not hot pluggable?

    - by A. Goossens
    For transferring exercise files from my Polar heart rate monitor i use the software Protrainer 5 with an external infrared usb adapter. Using Wine to run Protrainer 5 and some adjustments mentioned here (using irda-utils) i managed to make it work. Well, sort of: every time i want to transfer exercise files and the adapter is not plugged in i have to reboot my laptop with the usb adapter plugged in to make it work. Since i have a laptop it unfortunately is no option to just always leave the adapter in. It seems to me that the usb adapter isn't hot pluggable (which seems odd for a usb device) or there must be another problem. Polar WebLink (other software to transfer exercise files) experiences the same issue. Can anyone help me to fix this problem? Infrared usb adapter: Polar IRDA USB adapter OS: Ubuntu 12.10 (64-bit) Hardware: Lenovo Thinkpad T500

    Read the article

  • Video crashes with 10.10

    - by John Mahon
    I have installed both the 64bit and 32 bit versions of 10.10 on my Compaq Presario PC. I first installed the 64 bit version of the OS.The video often crashed when switching user. It also went haywire occasionally when I visited some web-sites. I read that there may be some problems with the 64 bit OS. So I installed the 32 bit version on another disk. This version seemed even less well behaved. HP's model number for the computer is SR1838NX. The hardware is listed at http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00628274&lang=en&cc=us&contentType=SupportFAQ&prodSeriesId=1841793&prodTypeId=12454&printver=true#A0 I think the important info is that the chip set is "ATI Radeon Xpress 200" and the processor is "Athlon 64 (S) 3700+ 2.2 GHz" Has anyone else had video problems with similar machines? Is there a work around or an update? I have had previous versions of Ubuntu working on this machine and other flavors of Linux as well. Thanks in advance. John

    Read the article

  • inforsacom ist Oracle EMEA Database Partner of the Year – wir gratulieren!

    - by A&C Redaktion
    Der Jubel war groß auf der Oracle Open World 2012 in San Francisco: inforsacom ist EMEA Specialized Database Partner of the Year! Bei der Verleihung betonte David Callaghan, Senior Vice President EMEA A&C, die Auszeichnung gehe an die spezialisierten Partner, „die höchste Level an Innovation und Leistungsfähigkeit in ihren Spezialgebieten erzielt haben.“ Die inforsacom Informationssysteme GmbH mit Sitz in Deutschland entwickelt und liefert seit 1997 integrierte IT-Lösungen im Data-Center. Die Auszeichnung des Platinum Partners ist die Krönung einer langjährigen erfolgreichen Zusammenarbeit mit Oracle. Kunden schätzen das Unternehmen als Experten für Infrastruktur-Lösungen und -Services im Bereich Rechenzentren. Neben dem Fokus auf Oracle Datenbank-Technologien ist inforsacom auch auf das Hardware- und Engineered Systems Portofolio spezialisiert. inforsacom hat als „trusted advisor“ immer den größtmöglichen Kundennutzen im Blick – das zahlt sich aus. Herzlichen Glückwunsch! Hier ist die Pressemeldung zur Award-Verleihung und das sind die Gewinner in den sechs weiteren Kategorien: Middleware: egabi Solutions (Ägypten) Applications: Accenture (Niederlande) Industry: Mannai Trading Corporation (Katar) Oracle Accelerate for Midsize Companies: Inoapps Ltd (United Kingdom) Oracle on Oracle: Capgemini Espania, S.L. (Spanien) Server and Storage Systems: Mannai Trading Corporation (Katar)

    Read the article

  • inforsacom ist Oracle EMEA Database Partner of the Year – wir gratulieren!

    - by A&C Redaktion
    Der Jubel war groß auf der Oracle Open World 2012 in San Francisco: inforsacom ist EMEA Specialized Database Partner of the Year! Bei der Verleihung betonte David Callaghan, Senior Vice President EMEA A&C, die Auszeichnung gehe an die spezialisierten Partner, „die höchste Level an Innovation und Leistungsfähigkeit in ihren Spezialgebieten erzielt haben.“ Die inforsacom Informationssysteme GmbH mit Sitz in Deutschland entwickelt und liefert seit 1997 integrierte IT-Lösungen im Data-Center. Die Auszeichnung des Platinum Partners ist die Krönung einer langjährigen erfolgreichen Zusammenarbeit mit Oracle. Kunden schätzen das Unternehmen als Experten für Infrastruktur-Lösungen und -Services im Bereich Rechenzentren. Neben dem Fokus auf Oracle Datenbank-Technologien ist inforsacom auch auf das Hardware- und Engineered Systems Portofolio spezialisiert. inforsacom hat als „trusted advisor“ immer den größtmöglichen Kundennutzen im Blick – das zahlt sich aus. Herzlichen Glückwunsch! Hier ist die Pressemeldung zur Award-Verleihung und das sind die Gewinner in den sechs weiteren Kategorien: Middleware: egabi Solutions (Ägypten) Applications: Accenture (Niederlande) Industry: Mannai Trading Corporation (Katar) Oracle Accelerate for Midsize Companies: Inoapps Ltd (United Kingdom) Oracle on Oracle: Capgemini Espania, S.L. (Spanien) Server and Storage Systems: Mannai Trading Corporation (Katar)

    Read the article

  • Flash player (in Firefox) is unstable in 14.04

    - by henry
    For 13.10, I used this guide to get Intel iGPU-supported playback of flash videos in Firefox: http://www.webupd8.org/2013/09/adobe-flash-player-hardware.html All in all, Intel graphics acceleration for flash content was working just fine in 13.10, at least on my machine (with Xubuntu). I basically followed the guide to do the same for 14.04, but about 2-3 weeks ago flash videos started acting up. Whenever I have one instance of flash paused or stopped in one tab and go to the next tab to continue some song on Soundcloud or something, it's game over. I'm clueless as to what I can do here. Did anything change in the meantime?

    Read the article

  • KVM switching from lower resolution system resets Ubuntu high resolution

    - by Ed Manet
    I'm running 12.04 desktop on my main desktop and it's hooked to a KVM (IOGear miniview) that shares the peripherals with a SLES 11 machine. The SLES 11 machine can't get the same resolution as the Ubuntu machine because of different graphics hardware. If I switch from Ubuntu to SLES and stay there too long, when I switch back to Ubuntu the screen resolution on Ubuntu is reset to the same as SLES. I can get it back easily just opening the Displays configuration; it immediately resets to the high resolution as soon as the Displays window opens. But all my open windows have been maximized and it's a P.I.T.A. having to resize them all again. How do I get it to just stay at the high resolution between switching between systems? Is there a setting in the Xorg conf file I need to set?

    Read the article

  • How do I stop stretching during window re-size in XNA?

    - by Bradley Uffner
    In my windowed mode XNA game when the user resizes the window the game stops updating the window and the last frame drawn is stretched and distorted until the user releases the mouse and the resize completes. Is there any way to have the game continue to run "normally", updating frames and redrawing the screen, during the resize event? I realize that keeping the render loop going while resizing may not be possible or recommended due do hardware managed resources getting continually created and destroyed, but is there any way to stop the ugly stretching? Ideally by leaving the existing frame unscaled in the top left, or with a black screen if that isn't possible.

    Read the article

  • Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

    - by vafa
    First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

    Read the article

  • Fujitsu und Oracle rücken enger zusammen

    - by A&C Redaktion
    Gerade wurde bekannt, dass sich Oracle und Fujitsu auf eine noch intensivere Zusammenarbeit geeinigt haben.Spannend für die Partner dürfte vor allem sein, dass Fujitsu nun laut Vertrag mit dem Oracle PartnerNetwork auch als Systemintegrator und Lösungsanbieter für das gesamte Produktportfolio aktiv wird.Ansonsten wird, wie zu erwarten, die Weiterentwicklung der SPARC Enterprise "M-Series"- Server voran getrieben. Das neue Gehäuse mit den Logos beider Firmen wurde ja bereits im Dezember präsentiert. Nun schwebt den Partnern eine Leistungssteigerung um das 15-fache innerhalb der nächsten fünf Jahre vor.Gemeinsame Tests sollen zudem das Zusammenspiel von Soft- und Hardware beider Firmen optimieren, vor allem in geschäftskritischen Umgebungen.Das klingt nach frischem Wind in der über 20-jährigen Partnerschaft. Oracle CEO Larry Ellison ist sichtlich zufrieden: „Die Partnerschaft zwischen Oracle und Fujitsu war nie stärker!"Weitere Details zur Kooperation gibt's hier, in der gemeinsamen Pressemitteilung beider Unternehmen.

    Read the article

  • After upgrading to Ubuntu 12.04, my broadcom wireless sta driver is not working

    - by Nuwan Aluwihare
    I upgraded my HP DV5-1000US Laptop to Ubuntu 12.04. But I cannot get it connected to the Wireless. I went through the settings, Hardware, Additional Drivers and it says that "No proprietary drivers are in use on this system". Also it says "Broadcom STA Wireless Driver" is not activated. I tried to activate it after got my laptop connected to the net through a wired connection, but it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"

    Read the article

  • Network manager indicator missing

    - by Jarmo
    I recently upgraded from 11.10 to 12.04. My first attempt failed, and I received an error stating that not all of the required packages were downloaded. Before (successfully) attempting again, I noticed that there was no longer a networking indicator in the upper panel. The indicator did not reappear with the installation of 12.04. To be clear, my wireless connection has experienced no problems, despite the missing indicator. Here are the solutions that I have found which did not work for me: Editing /etc/NetworkManager/NetworkManager.conf and replacing [ifupdown] managed=false with =true. Reinstalling network-manager (via apt-get install --reinstall). I am currently running 12.04 on an Asus Eee PC 1005 HA, and I am new to seeking solutions through forums, so I apologize if I have neglected to provide some vital information about my hardware.

    Read the article

  • USB gets disabled when i boot in linux (ubuntu 3.5.7)

    - by Gaurav Vyas
    I have connected USB keyboard & mouse to core i7 intel processor.When i boot my system in ubuntu with kernel 3.2.21 it runs properly i.e usb keyboard & usb mouse works satisfactorily. ISSUE When i boot my system in linux(ubuntu 3.5.7) USB keyboard & usb Mouse stops working.i have to boot my system by pressing "e" and then "Enter" i.e it directly links with the hardware.Mouse doesnt get power i.e LED under my optical mouse doesnt glow. kindly help me.

    Read the article

  • Cheap sound on speakers - Dell XPS L502X

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Ubuntu cant load sound cart

    - by Reza Marefaty
    I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

    Read the article

< Previous Page | 658 659 660 661 662 663 664 665 666 667 668 669  | Next Page >