Search Results

Search found 21758 results on 871 pages for 'mime message'.

Page 667/871 | < Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• Deploying a Git server in a AWS linux instance

  - by Leroux

  I'm making a git server on my linux instance in AWS. I tried doing it using these instructions but in the end I always get stuck with a "Permission denied (publickey)" message. So here is my detailed steps, the client is my windows machine running mysysgit and the server is the AWS ubuntu instance : 1) I created user Git with a simple password. 2) Created the ssh directory in ~/.ssh 3) On the client I created ssh keys using ssh-keygen -t rsa -b 1024, they got dropped in my /Users/[Name]/.ssh directory, id_rsa and id_rsa.pub key pair was created. 4) Using notepad I copy pasted the text into newly created files on the server in the ~/.ssh directory of my Git user. ~/.ssh/id_rsa and **~/.ssh/id_rsa.pub** were copied. 5) On the server I made the authorized_hosts file using "cat id_rsa.pub authorized_hosts" (while inside the .ssh directory) 6) Now to test it, on my client machine I did ssh -v git@[ip.address] 7) Result : debug1: Host 'ip.address' is known and matches the RSA host key. debug1: Found key in /c/Users/[Name]/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/[Name]/.ssh/identity debug1: Trying private key: /c/Users/[Name]/.ssh/id_rsa debug1: Offering public key: /c/Users/[Name]/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I would appreciate any insight anyone can give me.

  Read the article

• Kernel panic while loading Mac OS X on VMWare

  - by Vladimir Gritsenko

  I'm trying to run Mac OS X 10.6.3 on VMWare 7.1 from within Windows 7 64 bit. Trying to run the OS X doesn't work - shortly after booting VMWare announces the machine's death with this pop-up message: The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point. The console has a more interesting announcement: The real-time clock was not properly initialized on your system! With a dump of the detected CPU speed (~2.9 GHz), FSB (~94 MHz) and bus ratio (31). Somehow, the code that panics is documented in an accidental .diff file here. Apparently, it commits seppuku if the bus ratio is greater than 30. I underclocked my E6500 to a slower speed, but this apparently didn't make any difference. I can think of two possibilities right now: The CPU info being read is constant, and defines the maximum ability of the CPU. In which case it appears I'm screwed. VMWare presents its own CPU info to the machine, which I can perhaps somehow change. If so, how? If these sound completely off, that's because I'm a real newbie in these matters. Here's hoping you guys can show me the light :-)

  Read the article

• Cannot get SCVMM Admin Console to Connect to Hyper-V Server 2008 R2

  - by user63250

  I cannot get SCVMM Admin console to connect to Hyper-V Server 2008. I have changed all firewall settings on the server to allow for a connection, I have even tried turning the firewall off completely. I am getting this error message: Unable to connect to the Virtual Machine Manager server xx.xxx.xxx.xx. the Virtual Machine Manager service on that servier did not respond. Verify that Virtual Machine Manager has been installed on the server and that the Virtual Machine Manager service is running. Then try to connect again. If the problem persists, restart the Virtual Machine Manager Service. ID: 1602 I have tried restarting the VMMS service, and that did not work. I have posted a similar question to this before, and was told to make sure to intall the Hyper-V agent on the Hyper-V server. I was told that SCVMM can push the agent out to the server. However, if I cannot connect to the server, how can I use SCVMM to push out the agent? Thanks for any help.

  Read the article

• Whitelist IP from google-authenticator in sshd pam

  - by spudwaffle

  My Ubuntu 12.04 server uses the google-authenticator pam module to provide two step authentication for ssh. I need to make it so that a certain IP does not need to type the verification code. The /etc/pam.d/sshd file is below: # PAM configuration for the Secure Shell service # Read environment variables from /etc/environment and # /etc/security/pam_env.conf. auth required pam_env.so # [1] # In Debian 4.0 (etch), locale-related environment variables were moved to # /etc/default/locale, so read that as well. auth required pam_env.so envfile=/etc/default/locale # Standard Un*x authentication. @include common-auth # Disallow non-root logins when /etc/nologin exists. account required pam_nologin.so # Uncomment and edit /etc/security/access.conf if you need to set complex # access limits that are hard to express in sshd_config. # account required pam_access.so # Standard Un*x authorization. @include common-account # Standard Un*x session setup and teardown. @include common-session # Print the message of the day upon successful login. session optional pam_motd.so # [1] # Print the status of the user's mailbox upon successful login. session optional pam_mail.so standard noenv # [1] # Set up user limits from /etc/security/limits.conf. session required pam_limits.so # Set up SELinux capabilities (need modified pam) # session required pam_selinux.so multiple # Standard Un*x password updating. @include common-password auth required pam_google_authenticator.so I've already tried adding a auth sufficient pam_exec.so /etc/pam.d/ip.sh line above the google-authenticator line, but I can't understand how to check an IP adress in the bash script.

  Read the article

• iOS 6 in-app email does not send from within any app that supports it

  - by Joe Termine

  A strange problem -- Last night I upgraded to the final release of iOS 6 on my iPhone 4S and my iPad 2. When I open an app that allows you to send emails from within the app (e.g. adobe Reader, TurboScan, etc.) -- doesn't matter which one -- I am prompted with the email dialog from within the app, I can compose the message, but when I go to send one of two things will happen: either the email sending sound will "swoosh" and the dialog will close (leading me to think it worked) or some apps with good error handling will say there is an "error sending email." The error logs on my device are not reporting errors. It's just that the email doesn't really send. I have two Exchange mail boxes on these devices. One connects to a corporate network hosting on-premise exchange 2007 and the other connects to Gmail over the exchange interface. Have attempted to delete and re-pair these accounts (one at a time) without any change. I'm wondering if others are experiencing this problem, or whether I should just wipe the devices and chalk it up to (another) failed upgrade. Thoughts much appreciated. Joe

  Read the article

• Weird Apache Crash (with Dump) zend_hash_find (), libphp5.so

  - by Jacob84

  To be honest I don't have experience working with Apache. I'm just putting the best of my intentions on solving this and don't know if I'm making it right. So any help will be greatly appreciated. We have a php page wich is throwing the following message in the browser: Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. The logs from /var/log/httpd doesn't seem to help because It seems that the Apache is unable to write any information. So the exception or error is preventing the writing (maybe ocurring in some stage of the process that makes impossible to log?). I've read about the procedure to make dumps of the apache, and here we have the content: Reading symbols from /lib64/libgpg-error.so.0...(no debugging symbols found)...done. Loaded symbols for /lib64/libgpg-error.so.0 Reading symbols from /usr/lib64/php/modules/zip.so...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/php/modules/zip.so Core was generated by `/usr/sbin/httpd'. Program terminated with signal 11, Segmentation fault. 0 0x00007fb828fff712 in zend_hash_find () from /etc/httpd/modules/libphp5.so Missing separate debuginfos, use: debuginfo-install httpd-2.2.15-15.el6.centos.1.x86_64 I've been looking in the PHP files and I haven't found any direct call to zend_hash_find (wich seems to be causing the error). I've been looking at Google but found nothing related. Can somebody please help? Is there any step that I need to accomplish to know more? Thanks a lot, as always!

  Read the article

• Does the Intel DX79TO motherboard support x8 devices (SAS HBAs) on PCIe x16 slots?

  - by Zac B

  Context: I have an Intel DX79TO motherboard and a Sun SAS3081E-S/LSI 1060E-S HBA card with a PCIe x8 interface. I plug the HBA into my mobo next to my graphics card, and the HBA power lights illuminate, but the BIOS and OSes (tried Linux, ESXi, Win7) don't see the HBA at all. Question: Does the DX79TO motherboard support non-x16/non-GPU devices in its PCIe x16 slots? According to this question, some consumer motherboards don't support this, but I can't figure out whether or not this motherboard/family does. The answer will affect whether I buy a new motherboard or RMA the SAS card, with money attached to each course, so I figured I'd ask here first. What I've Tried: I've read the spec/manuals for the motherboard and the HBA, and I didn't see anything regarding whether or not the x16 slots were back-compatible to lower lane widths/non graphics-card devices, or whether or not the card could run in wider slots than x8. I've tried contacting Intel, but that was over a month ago and I haven't yet heard anything back except an automated "we got your email!" message.

  Read the article

• How to rip AVI from VOB using ffmpeg

  - by Linux Jedi

  I am trying to convert a VOB to an AVI. I have ripped an AVI from this VOB before using ffmpeg, but for some reason it's not working this time. This is what I tried: ffmpeg -sameq -acodec copy -i VTS_01_2.VOB output.avi This is the output I get: FFmpeg version 0.6.1, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 29 2010 18:02:10 with gcc 4.2.1 (Apple Inc. build 5664) configuration: libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 [mpeg2video @ 0x101014200]mpeg_decode_postinit() failure Last message repeated 6 times Input #0, mpeg, from 'VTS_01_2.VOB': Duration: 26:30:29.20, start: 140.171311, bitrate: 90 kb/s Stream #0.0[0x1e0]: Video: mpeg2video, yuv420p, 720x480 [PAR 32:27 DAR 16:9], 9800 kb/s, 31.44 fps, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1[0xa0]: Audio: pcm_s16be, 48000 Hz, 2 channels, s16, 1536 kb/s Output #0, avi, to 'output.avi': Metadata: ISFT : Lavf52.64.2 Stream #0.0: Video: mpeg4, yuv420p, 720x480 [PAR 32:27 DAR 16:9], q=2-31, 200 kb/s, 29.97 tbn, 29.97 tbc Stream #0.1: Audio: pcm_s16be, 48000 Hz, 2 channels, 1536 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Could not write header for output file #0 (incorrect codec parameters ?)

  Read the article

• Kerberos authentication not working for one single domain

  - by Buddy Casino

  We have a strange problem regarding Kerberos authentication with Apache mod_auth_kerb. We use a very simple krb5.conf, where only a single (main) AD server is configured. There are many domains in the forest, and it seems that SSO is working for most of them, except one. I don't know what is special about that domain, the error message that I see in the Apache logs is "Server not found in Kerberos database": [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1025): [client xx.xxx.xxx.xxx] Using HTTP/[email protected] as server principal for password verification [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(714): [client xx.xxx.xxx.xxx] Trying to get TGT for user [email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(625): [client xx.xxx.xxx.xxx] Trying to verify authenticity of KDC using principal HTTP/[email protected] [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(640): [client xx.xxx.xxx.xxx] krb5_get_credentials() failed when verifying KDC [Wed Aug 31 14:56:02 2011] [error] [client xx.xxx.xxx.xxx] failed to verify krb5 credentials: Server not found in Kerberos database [Wed Aug 31 14:56:02 2011] [debug] src/mod_auth_kerb.c(1110): [client xx.xxx.xxx.xxx] kerb_authenticate_user_krb5pwd ret=401 user=(NULL) authtype=(NULL) When I try to kinit that user on the machine on which Apache is running, it works. I also checked that DNS lookups work, including reverse lookup. Who can tell me whats going?

  Read the article

• How does enterprise failover, such as with google.com, actually work?

  - by Alex Regan

  We have a few fedora systems that are configured for web, FTP, and email services. We'd like to mirror these services, so that we can provide near 100% reliability for our users. I'm a fairly experienced Linux administrator, but don't have much experience with redundant systems. What is the best way to do this? How does google and amazon do it? Google.com resolves to multiple IP addresses, but if my local desktop caches one of the IPs that are unreachable, I'm going to get a failed connection message. How do they prevent that from happening? If one of their servers goes down, how is it automatically redirected to another system, without the end-user ever knowing it? I understand there are failover devices, but they're only for failing over the system itself, not a complete network. Let's say we have the worst-case scenario, such as my primary system becomes inaccessible. What are the fundamental components that are used on Linux systems to provide this capability? I'm looking for concepts, or approaches, not answers like "check out openstack". What are the actual pieces that make up the solution? What has to be done to implement this capability? Hopefully my question is clear. I'd like to know what the pieces are that make up a failover system and what approach is taken by successful organizations that implement it. Thanks again, Alex

  Read the article

• Rsync Push files from linux to windoes. ssh issue - connection refused

  - by piyush c

  For some reason I want to run a script to move files from Linux machine to Windows. I have installed cwRsync on my windows machine and able to connect to linux machine. When i execute following command: rsync -e "ssh -l "piyush"" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" Where 10.0.0.60 is my widows machine and I am running above command on Linux - CentOS 5.5. After running command I get following error message: ssh: connect to host 10.0.0.60 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(463) [sender=2.6.8] [root@localhost sync]# ssh [email protected] ssh: connect to host 10.0.0.60 port 22: Connection refused I have modified my firewall settings on widows to allow all ports. I think this issue is due to SSH Daemon not present on my windows machine. So I tried installing OpenSSH on my machine and running ssh-agent but didn't helped. I tried similar command to run on my widows machine to pull files from Linux and its working fine. For some reason I want command for Linux machine so that I can embed it in a shell script. Can you suggest me if I am missing anything. I am already having cwRsync installed on my widows and running it in daemon mode using --damemon option. And I am able to login using ssh from windows machine to linux machine. When I issue bellow command, it just blocks for 120 seconds (timeout I specified in command) and exits saying there is timeout. rsync -e "ssh -l piyush" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" After starting rsync on widows, I checked, rsyc is running. And widows firewall setting are set to minimal, and on Linux machine stopped iptables service so that port 873 (default rsync port) is not blocked. What can be the possible reason that Linux machine is not able to connect to rsync-daemon on windows machine?

  Read the article

• Kickstart installation from USB -- Kickstart location

  - by dooffas

  After managing to get a Fedora ISO to rebuild successfully (for a USB stick) after adding a kickstart file (http://serverfault.com/questions/548405/), I now have an issue with locating the kickstart file on the USB media. When this is done from a CDROM you can simply kickckstart by adding this parameter to boot: linux ks=cdrom This will kickstart (providing the kickstart file is named ks.cfg and is in the root of the disk). Now, obviously this will be different for the USB drive, so from my research, I assumed that this line would do the job: linux ks=hd:sdb1:/ks.cfg Evidently this does not work. I get an error informing me this drive is already mounted and cannot be remounted. EDIT: Actual error message: mount: /dev/sdb1 is already mounted or /run/install/tmpmnt0 busy Warning: Can't get kickstart from /dev/sdb1:/ks.cfg To test that the syntax was correct I placed the kickstart file on another USB stick and loaded the same command to grab ks.cfg from the new location: linux ks=hd:sdc1:/ks.cfg This does work (providing USB sticks are mounted in order, boot - sdb1, kickstart - sdc1). The install will kickstart and complete the install with no issue. Obviously having to use 2 pen drives is somewhat frustrating and unreliable. Is there a way around this?

  Read the article

• dnsmasq(as DHCP server) isn't working in KVM+libvirt envirmont

  - by user2681054

  I'm using dnsmasq as DHCP server in VM environment. But It didn't working. I disabled basic DHCP feature in libvirt. <network> <name>default</name> <uuid>84da0678-e56d-8fc2-6f8b-e8eba784849a</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:7B:64:0B'/> <ip address='192.168.122.1' netmask='255.255.255.0'> </ip> </network> As you can see, I removed this tag! <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> </dhcp> And I installed dnsmasq in Host machine. During installation dnsmasq, there was an error message about 127.0.0.1.(dnsmasq: failed to create listening socket for 127.0.0.1) So I commented out listen-address option, and added dhcp-range/dhcp-option options, like this. listen-address=127.0.0.1 dhcp-range=192.168.122.100,192.168.122.200,24h dhcp-option=option:router,192.168.122.1 That's all I've done with dnsmasq. But guest VM couldn't get IP address from host which is dnsmasq server running. After that , I installed isc-dhcp-server instead of dnsmasq.... and it works! But I still want to use dnsmasq instead of isc-dhcp-server. Are there any helping hands? I disabled host machine's firewall. I've heard that libvirt basically use dnsmasq. Is this the reason why I couldn't use dnsmasq in libvirt environment?

  Read the article

• Facebook Chat through XMPP protocol on Pidgin Portable - Will not Authorize

  - by Sara Neff

  I heard you can use facebook chat on desktops now. Thats awsome! What i didn't hear is that it is a pain in the butt! Not awsome! I've followed six nearly identical sets of instructions from six different websides, including the one that facebook generates for you, to get facebook chat connected through Pidgin. Its the latest portable version, so from what i hear the plugin is out of the question. Whenever I go to try and connect i get a message saying "Not Authorized" and buttons to either modify the account info, or retry. NOTHING i have done has fixed this, and I can't find anything remotely usefull anywhere. I am running windows xp, and running pidgin (portable) off of a flash drive. Someone please tell me what i have to do. I read about authorizing the chat on my actual facebook page. I'd have tried that if i could find out how to do it, but if its there they hid it good. HELP?!

  Read the article

• Emails from web site sometimes blank or gibberish

  - by John Gardeniers

  Our company has one web site with an online store based on osCommerce. The system sends emails for various reasons, such as password changes, order confirmations, etc., using PHP's mail() function. We occasionally have customers report that the email they received is either blank (email is plain text format) or gibberish (email is in HTML format). In the latter case it's really just HTML that's being displayed as raw text but of course the customers can't read it. In this case the first opening tag's <, and sometimes a few more characters, has gone missing. In an attempt to determine whether this was happening only for certain customers or email systems I configured the web site to send a CC of each message to a service account at my end. Those CC'd messages always arrive intact and display correctly in Outlook. For what it's worth, it seems to happen a little more frequently to Hotmail users but is certainly not limited to them. As the web site is on a shared (Debian) host there's precious little I can do about debugging things from that end, although if I made the right request I feel the hosting company staff would help me, even though they have limited resources to spend on such matters. Any suggestions on what else I might do to try and determine just why those emails are not being received correctly by some customers, yet a CC copy arrives just fine?

  Read the article

• Failed to open the Parallels networking module

  - by user49204

  I'm running Parallels Desktop 7 on OSX Lion and encounter the issue in the subject on every time I'm trying to launch Parallels VM. The error message contains a hint to restore to network configuration default which does not help. As been advised by some forums to ran the following script: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hypervisor.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_hid_hook.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_usb_connect.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_vnic.kext" The output of: sudo kextutil "/Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext" is: Diagnostics for /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext: Warnings: The booter does not recognize symbolic links; confirm these files/directories aren't needed for startup: /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeDirectory /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeRequirements /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeResources /Library/Parallels/Parallels Service.app/Contents/Kexts/10.6/prl_netbridge.kext/Contents/CodeSignature Dependency Resolution Failures: No kexts found for these libraries: com.parallels.kext.prl_hypervisor I've noticed that prl_netbridge is not being loaded (when I'm trying to unload it, I'm notified it is not loaded). Am I doing something wrong? What can be the reason for such behaviour?

  Read the article

• 613 threads limit on debian

  - by Joel

  When running this program thread-limit.c on my dedicated debian server, the output says that my system can't create more than around 600 threads. I need to create more threads, and fix my system misconfiguration. Here are a few informations about my dedicated server: de801:/# uname -a Linux de801.ispfr.net 2.6.18-028stab085.5 #1 SMP Thu Apr 14 15:06:33 MSD 2011 x86_64 GNU/Linux de801:/# java -version java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) de801:/# ldd $(which java) linux-vdso.so.1 => (0x00007fffbc3fd000) libpthread.so.0 => /lib/libpthread.so.0 (0x00002af013225000) libjli.so => /usr/lib/jvm/java-6-sun-1.6.0.26/jre/bin/../lib/amd64/jli/libjli.so (0x00002af013441000) libdl.so.2 => /lib/libdl.so.2 (0x00002af01354b000) libc.so.6 => /lib/libc.so.6 (0x00002af013750000) /lib64/ld-linux-x86-64.so.2 (0x00002af013008000) de801:/# cat /proc/sys/kernel/threads-max 1589248 de801:/# ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 794624 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 10240 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 128 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Here is the output of the C program de801:/test# ./thread-limit Creating threads ... Address of c = 1061520 KB Address of c = 1081300 KB Address of c = 1080904 KB Address of c = 1081168 KB Address of c = 1080508 KB Address of c = 1080640 KB Address of c = 1081432 KB Address of c = 1081036 KB Address of c = 1080772 KB 100 threads so far ... 200 threads so far ... 300 threads so far ... 400 threads so far ... 500 threads so far ... 600 threads so far ... Failed with return code 12 creating thread 637. Any ideas how to fix this please ?

  Read the article

• do not require smtp authentication for a specific domain using hMail server

  - by toryan

  One of my clients has a needlessly complex e-mail setup for a couple of domains, which is causing problems when they try to send e-mail between them. They have a couple of domains where mail follows a slightly weird path: Users connect to an Exchange server to send e-mail The exchange server relays the message to an ISP-owned SMTP server as a smart host The ISPs server delivers the mail to the mail exchanger specified in DNS The mail exchanger is another server that runs hMailServer The Exchange server connects to the hMail server via POP3 and retrieves the messages. The problem arises when they send mail between addresses in the same domain, or two addresses that are present on the hMail server. hMail requires SMTP authentication when sending from local to local addresses, so the messages don't arrive. Removing SMTP authentication isn't really an option, as the server has been the target of spam being sent from spoofed local addresses. SMTP authentication prevents this. It is possible to add the ISP's mail server as an IP range with specific rules, but this seems inelegant. Bearing in mind I only have access to the hMail server and not the Exchange server, is there a better way of going about this?

  Read the article

• nginx starts up before apache

  - by paullb

  I've been fumbling through setting up redmine on a unbuntu (12.04) box and somewhere along the line NginX got set up and now apache no longer loads because nginx has already grabbed the port. I tried removing NginX with the below command but that didn't seem to make any difference. When I restarted the server and pointed my web browser I still got the "Welcome to NginX" message sudo apt-get purge nginx I have confirmed that NginX is gone because when I run the above now I get as an output Package nginx is not installed, so not removed Yet everytime I start the machine it is running again. I noticed the following for the running processes (if that is helpful) root 923 0.0 0.0 76784 1280 ? Ss 03:00 0:00 nginx: master process /usr/sbin/nginx www-data 925 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 926 0.0 0.1 77092 2204 ? S 03:00 0:00 nginx: worker process www-data 927 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 928 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process Any advice for bringing back apache2 as the "default" (for lack of a better term) web server?

  Read the article

• How do I renew a Web Server certificate in Windows Server 2008?

  - by Mark Seemann

  The SSL certificate for my web site just expired a few days ago, and I would like to renew it. I originally issued it two years ago using my Windows 2008 Certificate Authority, and it's worked without a hitch in all that time, so I would like to renew the certificate as simply as possible to make sure that all the applications relying on that certificate continue to work. I can open an MMC instance and add the Certificates snap-in for the Local Computer. I can find the relevant certificate under Personal, but I can't renew it. When I select Renew certificate with new key I get the following message: Web Server Status: Unavailable The permissions on the certificate template do not allow the current user to enroll for this type of certificate. You do not have permission to request this type of certificate. However, I can't understand this, as I'm logged on as a Domain Admin and I'm running the MMC instance in elevated mode. I've checked the Web Server certificate template, and Domain Admins have the Enroll permission on this template. FWIW, I also tried rebooting the server. How can I renew the certificate?

  Read the article

• Windows Server 2008R2 Virtual Lab Activation strategies?

  - by William Hilsum

  I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

  Read the article

• FTP on Linux "Failed to retrieve directory listing" not firewall issue

  - by Jaka Prasnikar

  I've got an VPS in germany running Debian X64. I have very strange issue. I have ISPConfig CP installed using proftpd and I can not connect to FTP by any means. Few hours ago I've had installed DirectAdmin on CentOS same VPS and same issue. Simply when I connect to FTP server I get these: Status: Resolving address of web02.defikon.com Status: Connecting to 130.255.190.71:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 12:15. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER default1 Response: 331 User default1 OK. Password required Command: PASS ****** Response: 230-User default1 has group access to: client0 sshusers Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing I even tried telnet localhost 21 and the same happends. Once I issue command "LIST" I get time out. I've tried every thing and I can't get this to work =( Please help ! P.S.: iptables is turned off.

  Read the article

• Mac Port error installing gsoap

  - by Kevin

  Hi All, I have installed Mac Ports V1.8.1 no worries. I ran sudo port -v selfupdate no worries. I ran sudo port install gsoap And get the following error message. --- Computing dependencies for gsoap --- Fetching gsoap --- Attempting to fetch gsoap_2.7.13.tar.gz from http://optusnet.dl.sourceforge.net/gsoap2 --- Verifying checksum(s) for gsoap --- Extracting gsoap --- Applying patches to gsoap --- Configuring gsoap Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gsoap/work/gsoap-2.7" && ./configure --prefix=/opt/local --enable-samples " returned error 77 Command output: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking build system type... i386-apple-darwin10.2.0 checking host system type... i386-apple-darwin10.2.0 checking whether make sets $(MAKE)... (cached) no checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details. Error: Status 1 encountered during processing. Any ideas as to why it is failing. Regards Kevin

  Read the article

• ScreenOS MIP selection for outbound connections

  - by David Mackintosh

  Given a ScreenOS 6.3.0 firewall with this configuration: unset flow reverse-route clear-text set interface "ethernet0/0" zone "Trust" set interface ethernet0/0 ip 192.168.1.1/24 set interface ethernet0/2 ip 10.0.0.1/24 set interface ethernet0/2 mip 10.9.9.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set interface ethernet0/2 mip 10.8.8.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set route 0.0.0.0/0 interface ethernet0/2 gateway 10.0.0.254 ... (and assuming appropriate policies) is there a way to control which MIP the firewall selects for outbound connections initiated by 192.168.1.10? (presumably because I want the upstream 10.0.0.254 to do different things with the packet depending on what its source IP is). Update: OK, my scenario is this: I have two ISP uplinks, each giving me a different IP space. Each ISP will only route the IP space they have assigned me. So in order for the server to be reachable by both ISPs, I need two MIPs for the same server, one on each interface. Inbound traffic will work fine with the 'unset flow reverse-route clear-text' option in use. But for outbound (think an email server sending a message) I need a way to select an appropriate MIP depending on which outbound link I want the system to use, and I want this to be resiliant so that if the link the firewall prefers goes down overnight I don't have to manually flip something to keep the mail flowing. Basically I'm trying to avoid having to buy a link-balancer appliance (or two since I'll need a cluster). Is there a way to do this?

  Read the article

< Previous Page | 663 664 665 666 667 668 669 670 671 672 673 674  | Next Page >