Search Results

Search found 2173 results on 87 pages for 'alpha transparency'.

Page 67/87 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • Add the Vista Style Sidebar Back to Windows 7

    - by Mysticgeek
    If you are moving from Vista to Windows 7, you might miss the Sidebar which was introduced in Vista. Today we take a look at a couple options for getting a Sidebar back in Windows 7. Copy Files from Vista Note: In this example we are using 32-bit versions of Vista and Windows 7. Make sure you are logged in with Administrator credentials. If you have a Vista machine running, we can copy the Windows Sidebar files over to the Windows 7 machine. On the Vista machine navigate to C:\Program Files and copy the Windows Sidebar folder and all of its contents over to a flash drive or network location. On the Windows 7 machine go to C:\Program Files and rename the Windows Sidebar folder to something like Windows Sidebar_old. Now copy the Vista Windows Sidebar folder into C:\Program Files… Now you will have both folders…Windows Sidebar and Windows Sidebar_old in your C:\Program Files folder. Right-click on the desktop and select Gadgets. There you are…the Original Vista Sidebar is back and will act as it did in Vista. Move Sidebar Gadgets Another work around if you don’t have a copy of Vista, you can simply move the Desktop Gadgets you want over to the right side of the screen and they will stay there…no dock needed. Type gadgets into the Search box in the Windows Start Menu and click on Desktop Gadgets. Then drag the included Gadgets you want over to the right side of the screen. Or click on the link to Get more gadgets online to find more. Once you have them where you want, each time you reboot they will still be in the same location. This holds true no matter where you place them on your desktop as well. Install Desktop Sidebar If you want an enhanced sidebar that includes a lot of different features, and don’t have a copy of Vista, you might want to check out Desktop Sidebar Beta (link below). This is a freeware application that works with Windows XP, Vista, and Windows 7. After installation you can access it from the Start Menu… Here is how it will look after you launch it… It includes several pre-installed panels including a clock, Media Player, Search Bar, Slideshow, Messenger, Outlook inbox, Tasks, Quick Launch, Performance…and a lot more. It is highly customizable and allows you to change skins, add various levels of transparency, and a lot more. One caveat with going with Desktop Sidebar is we didn’t find a way to add Windows Gadgets to it (though there might be a plugin for it that we’re not aware of). But there are so many options, you may not mind. However, you can still use the desktop gadgets as you normally would in Windows 7. Believe it or not, some people actually prefer the Vista style Sidebar and would like it back in Windows 7. With these options you can get the Vista Sidebar back if you have a copy of Vista, place the Gadgets on the desktop, or go the freeware route. Download Desktop Sidebar (freeware) Similar Articles Productive Geek Tips Disable Windows Sidebar in VistaHow To Repair Your Crashed or Hanging Vista SidebarApplying Themes To Your Windows Vista SidebarDisable Sidebar / Desktop Gadgets on Windows 7Put AOL Instant Messenger (AIM) In your Windows Sidebar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox)

    Read the article

  • ASP.NET MVC, Web API, Razor and Open Source

    - by ScottGu
    Microsoft has made the source code of ASP.NET MVC available under an open source license since the first V1 release. We’ve also integrated a number of great open source technologies into the product, and now ship jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js and JSON.NET as part of it. I’m very excited to announce today that we will also release the source code for ASP.NET Web API and ASP.NET Web Pages (aka Razor) under an open source license (Apache 2.0), and that we will increase the development transparency of all three projects by hosting their code repositories on CodePlex (using the new Git support announced last week). Doing so will enable a more open development model where everyone in the community will be able to engage and provide feedback on code checkins, bug-fixes, new feature development, and build and test the products on a daily basis using the most up-to-date version of the source code and tests. We will also for the first time allow developers outside of Microsoft to submit patches and code contributions that the Microsoft development team will review for potential inclusion in the products. We announced a similar open development approach with the Windows Azure SDK last December, and have found it to be a great way to build an even tighter feedback loop with developers – and ultimately deliver even better products as a result. Very importantly - ASP.NET MVC, Web API and Razor will continue to be fully supported Microsoft products that ship both standalone as well as part of Visual Studio (the same as they do today). They will also continue to be staffed by the same Microsoft developers that build them today (in fact, we have more Microsoft developers working on the ASP.NET team now than ever before). Our goal with today’s announcement is to increase the feedback loop on the products even more, and allow us to deliver even better products.  We are really excited about the improvements this will bring. Learn More You can now browse, sync and build the source tree of ASP.NET MVC, Web API, and Razor on the http://aspnetwebstack.codeplex.com web-site.  The Git repository on the site is the live RC milestone development tree that the team has been working on the last several weeks, and the tree contains both the runtime sources + tests, and is buildable and testable by anyone.  Because the binaries produced are bin-deployable, this allows you to compile your own builds and try product updates out as soon as they are checked-in. You can also now contribute directly to the development of the products by reviewing and sending feedback on code checkins, submitting bugs and helping us verify fixes as they are checked in, suggesting and giving feedback on new features as they are implemented, as well as by submitting code fixes or code contributions of your own. Note that all code submissions will be rigorously reviewed and tested by the ASP.NET MVC Team, and only those that meet an extremely high bar for both quality and design/roadmap appropriateness will be merged into the source. Summary All of us on the team are really excited about today’s announcement – it has been something we’ve been working toward for many years.  The tighter feedback loop is going to enable us to build even better products, and take ASP.NET to the next level in terms of innovation and customer focus. Thanks, Scott P.S. In addition to blogging, I use Twitter to-do quick posts and share links. My Twitter handle is: @scottgu

    Read the article

  • Oracle Big Data Software Downloads

    - by Mike.Hallett(at)Oracle-BI&EPM
    Companies have been making business decisions for decades based on transactional data stored in relational databases. Beyond that critical data, is a potential treasure trove of less structured data: weblogs, social media, email, sensors, and photographs that can be mined for useful information. Oracle offers a broad integrated portfolio of products to help you acquire and organize these diverse data sources and analyze them alongside your existing data to find new insights and capitalize on hidden relationships. Oracle Big Data Connectors Downloads here, includes: Oracle SQL Connector for Hadoop Distributed File System Release 2.1.0 Oracle Loader for Hadoop Release 2.1.0 Oracle Data Integrator Companion 11g Oracle R Connector for Hadoop v 2.1 Oracle Big Data Documentation The Oracle Big Data solution offers an integrated portfolio of products to help you organize and analyze your diverse data sources alongside your existing data to find new insights and capitalize on hidden relationships. Oracle Big Data, Release 2.2.0 - E41604_01 zip (27.4 MB) Integrated Software and Big Data Connectors User's Guide HTML PDF Oracle Data Integrator (ODI) Application Adapter for Hadoop Apache Hadoop is designed to handle and process data that is typically from data sources that are non-relational and data volumes that are beyond what is handled by relational databases. Typical processing in Hadoop includes data validation and transformations that are programmed as MapReduce jobs. Designing and implementing a MapReduce job usually requires expert programming knowledge. However, when you use Oracle Data Integrator with the Application Adapter for Hadoop, you do not need to write MapReduce jobs. Oracle Data Integrator uses Hive and the Hive Query Language (HiveQL), a SQL-like language for implementing MapReduce jobs. Employing familiar and easy-to-use tools and pre-configured knowledge modules (KMs), the application adapter provides the following capabilities: Loading data into Hadoop from the local file system and HDFS Performing validation and transformation of data within Hadoop Loading processed data from Hadoop to an Oracle database for further processing and generating reports Oracle Database Loader for Hadoop Oracle Loader for Hadoop is an efficient and high-performance loader for fast movement of data from a Hadoop cluster into a table in an Oracle database. It pre-partitions the data if necessary and transforms it into a database-ready format. Oracle Loader for Hadoop is a Java MapReduce application that balances the data across reducers to help maximize performance. Oracle R Connector for Hadoop Oracle R Connector for Hadoop is a collection of R packages that provide: Interfaces to work with Hive tables, the Apache Hadoop compute infrastructure, the local R environment, and Oracle database tables Predictive analytic techniques, written in R or Java as Hadoop MapReduce jobs, that can be applied to data in HDFS files You install and load this package as you would any other R package. Using simple R functions, you can perform tasks such as: Access and transform HDFS data using a Hive-enabled transparency layer Use the R language for writing mappers and reducers Copy data between R memory, the local file system, HDFS, Hive, and Oracle databases Schedule R programs to execute as Hadoop MapReduce jobs and return the results to any of those locations Oracle SQL Connector for Hadoop Distributed File System Using Oracle SQL Connector for HDFS, you can use an Oracle Database to access and analyze data residing in Hadoop in these formats: Data Pump files in HDFS Delimited text files in HDFS Hive tables For other file formats, such as JSON files, you can stage the input in Hive tables before using Oracle SQL Connector for HDFS. Oracle SQL Connector for HDFS uses external tables to provide Oracle Database with read access to Hive tables, and to delimited text files and Data Pump files in HDFS. Related Documentation Cloudera's Distribution Including Apache Hadoop Library HTML Oracle R Enterprise HTML Oracle NoSQL Database HTML Recent Blog Posts Big Data Appliance vs. DIY Price Comparison Big Data: Architecture Overview Big Data: Achieve the Impossible in Real-Time Big Data: Vertical Behavioral Analytics Big Data: In-Memory MapReduce Flume and Hive for Log Analytics Building Workflows in Oozie

    Read the article

  • Improving performance of a particle system (OpenGL ES)

    - by Jason
    I'm in the process of implementing a simple particle system for a 2D mobile game (using OpenGL ES 2.0). It's working, but it's pretty slow. I start getting frame rate battering after about 400 particles, which I think is pretty low. Here's a summary of my approach: I start with point sprites (GL_POINTS) rendered in a batch just using a native float buffer (I'm in Java-land on Android, so that translates as a java.nio.FloatBuffer). On GL context init, the following are set: GLES20.glViewport(0, 0, width, height); GLES20.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); GLES20.glEnable(GLES20.GL_CULL_FACE); GLES20.glDisable(GLES20.GL_DEPTH_TEST); Each draw frame sets the following: GLES20.glEnable(GLES20.GL_BLEND); GLES20.glBlendFunc(GLES20.GL_ONE, GLES20.GL_ONE_MINUS_SRC_ALPHA); And I bind a single texture: GLES20.glActiveTexture(GLES20.GL_TEXTURE0); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, textureHandle); GLES20.glUniform1i(mUniformTextureHandle, 0); Which is just a simple circle with some blur (and hence some transparency) http://cl.ly/image/0K2V2p2L1H2x Then there are a bunch of glVertexAttribPointer calls: mBuffer.position(position); mGlEs20.glVertexAttribPointer(mAttributeRGBHandle, valsPerRGB, GLES20.GL_FLOAT, false, stride, mBuffer); ...4 more of these Then I'm drawing: GLES20.glUniformMatrix4fv(mUniformProjectionMatrixHandle, 1, false, Camera.mProjectionMatrix, 0); GLES20.glDrawArrays(GLES20.GL_POINTS, 0, drawCalls); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, 0); My vertex shader does have some computation in it, but given that they're point sprites (with only 2 coordinate values) I'm not sure this is the problem: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform mat4 u_ProjectionMatrix; attribute vec4 a_Position; attribute float a_PointSize; attribute vec3 a_RGB; attribute float a_Alpha; attribute float a_Burn; varying vec4 v_Color; void main() { vec3 v_FGC = a_RGB * a_Alpha; v_Color = vec4(v_FGC.x, v_FGC.y, v_FGC.z, a_Alpha * (1.0 - a_Burn)); gl_PointSize = a_PointSize; gl_Position = u_ProjectionMatrix * a_Position; } My fragment shader couldn't really be simpler: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform sampler2D u_Texture; varying vec4 v_Color; void main() { gl_FragColor = texture2D(u_Texture, gl_PointCoord) * v_Color; } That's about it. I had read that transparent pixels in point sprites can cause issues, but surely not at only 400 points? I'm running on a fairly new device (12 month old Galaxy Nexus). My question is less about my approach (although I'm open to suggestion) but more about whether there are any specific OpenGL "no no's" that have leaked into my code. I'm sure there's GL master out there facepalming right now... I'd love to hear any critique.

    Read the article

  • Exclusive Webcast Series Explains How Project Success Drives Business Success

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In the wake of the global financial crisis, organizations throughout the world are redoubling their efforts to enhance financial discipline, achieve operational excellence, and mitigate risk. How can they address all these areas with one comprehensive strategy? With enterprise project portfolio management solutions that provide greater transparency and visibility across all projects and portfolios, says Guy Barlow, Oracle director of industry strategy. In the following interview and in an exclusive, three-part webcast series, Barlow examines today’s new management realities and explains how organizations can succeed in this environment. Q: Financial discipline has always been important, what’s different today? A: A number of organizations are showing that by fiscally aligning projects with the business goals of their organizations, they can shave off hundreds of thousands if not millions of dollars in inefficiency and waste. For example, one Oracle customer, the Columbus Regional Airport Authority, reduced its unbudgeted costs from US$24.4 million to US$3.5 million, for an 88 percent improvement. Q: How do organizations achieve results like this? A: First, they need to have the vision to see project management as part of a broad and critical element in their overall enterprise strategy. That means using a single solution, such as Oracle‘s Primavera, to manage multiple projects across multiple functions within a company. So someone in corporate mergers and acquisitions as well as a capital projects team can standardize on the same technology. By doing so they all gain greater efficiency in planning and execution—because the technology can be configured for their specific roles and needs—and the IT organization really benefits from lower maintenance. Second, enterprises must give executive leaders—CFOs, COOs, and CEOs—visibility across the entire business to easily see what projects are on track and which ones are falling behind. In fact, once executives see the power of enterprise project portfolio management, uptake is very quick across the organization. Read the full interview here.

    Read the article

  • Drinking Our Own Champagne: Fusion Accounting Hub at Oracle

    - by Di Seghposs
    A guest post by Corey West, Senior Vice President, Oracle's Corporate Controller and Chief Accounting Officer There's no better story to tell than one about Oracle using its own products with blowout success. Here's how this one goes. As you know, Oracle has increased its share of the software market through a number of high-profile acquisitions. Legally combining companies is a very complicated process -- it can take months to complete, especially for the acquisitions with offices in several countries, each with its own unique laws and regulations. It's a mission critical and time sensitive process to roll an acquired company's legacy systems (running vital operations, such as accounts receivable and general ledger (GL)) into the existing systems at Oracle. To date, we've run our primary financial ledgers in E-Business Suite R12 -- and we've successfully met the requirements of the business and closed the books on time every single quarter. But there's always room for improvement and that comes in the form of Fusion Applications. We are now live on Fusion Accounting Hub (FAH), which is the first critical step in moving to a full Fusion Financials instance. We started with FAH so that we could design a global chart of accounts. Eventually, every transaction in every country will originate from this global chart of accounts -- it becomes the structure for managing our business more uniformly. In conjunction, we're using Oracle Hyperion Data Relationship Management (DRM) to centralize and automate governance of our global chart of accounts and related hierarchies, which will help us lower our costs and greatly reduce risk. Each month, we have to consolidate data from our primary general ledgers. We have been able to simplify this process considerably using FAH. We can now submit our primary ledgers running in E-Business Suite (EBS) R12 directly to FAH, eliminating the need for more than 90 redundant consolidation ledgers. Also we can submit incrementally, so if we need to book an adjustment in a primary ledger after close, we can do so without re-opening it and re-submitting. As a result, we have earlier visibility to period-end actuals during the close. A goal of this implementation, and one that we successfully achieved, is that we are able to use FAH globally with no customization. This means we have the ability to fully deploy ledger sets at the consolidation level, plus we can use standard functionality for currency translation and mass allocations. We're able to use account monitoring and drill down functionality from the consolidation level all the way through to EBS primary ledgers and sub-ledgers, which allows someone to click through a transaction appearing at the consolidation level clear through to its original source, a significant productivity enhancement when doing research. We also see a significant improvement in reporting using Essbase cube and Hyperion Smart View. Specifically, "the addition of an Essbase cube on top of the GL gives us tremendous versatility to automate and speed our elimination process," says Claire Sebti, Senior Director of Corporate Accounting at Oracle. A highlight of this story is that FAH is running in a co-existence environment. Our plan is to move to Fusion Financials in steps, starting with FAH. Next, our Oracle Financial Services Software subsidiary will move to a full Fusion Financials instance. Then we'll replace our EBS instance with Fusion Financials. This approach allows us to plan in steps, learn as we go, and not overwhelm our teams. It also reduces the risk that comes with moving the entire instance at once. Maria Smith, Vice President of Global Controller Operations, is confident about how they've positioned themselves to uptake more Fusion functionality and is eager to "continue to drive additional efficiency and cost savings." In this story, the happy customers are Oracle controllers, financial analysts, accounting specialists, and our management team that get earlier access to more flexible reporting. "Fusion Accounting Hub simplifies our processes and gives us more transparency into account activity," raves Alex SanJuan, Senior Director, Record to Report Strategic Process Owner. Overall, the team has been very impressed with the usability and functionality of FAH and are pleased with the quantifiable improvements. Claire Sebti states, "Our WD5 close activities have been reduced by at least four hours of system processing time, just for the consolidation group." Fusion Accounting Hub is an inspiring beginning to our Fusion Financials implementation story. There's no doubt it's going to be an international bestseller! Corey West, Senior Vice President Oracle's Corporate Controller and Chief Accounting Officer

    Read the article

  • How Do You Actually Model Data?

    Since the 1970’s Developers, Analysts and DBAs have been able to represent concepts and relations in the form of data through the use of generic symbols.  But what is data modeling?  The first time I actually heard this term I could not understand why anyone would want to display a computer on a fashion show runway. Hey, what do you expect? At that time I was a freshman in community college, and obviously this was a long time ago.  I have since had the chance to learn what data modeling truly is through using it. Data modeling is a process of breaking down information and/or requirements in to common categories called objects. Once objects start being defined then relationships start to form based on dependencies found amongst other existing objects.  Currently, there are several tools on the market that help data designer actually map out objects and their relationships through the use of symbols and lines.  These diagrams allow for designs to be review from several perspectives so that designers can ensure that they have the optimal data design for their project and that the design is flexible enough to allow for potential changes and/or extension in the future. Additionally these basic models can always be further refined to show different levels of details depending on the target audience through the use of three different types of models. Conceptual Data Model(CDM)Conceptual Data Models include all key entities and relationships giving a viewer a high level understanding of attributes. Conceptual data model are created by gathering and analyzing information from various sources pertaining to a project during the typical planning phase of a project. Logical Data Model (LDM)Logical Data Models are conceptual data models that have been expanded to include implementation details pertaining to the data that it will store. Additionally, this model typically represents an origination’s business requirements and business rules by defining various attribute data types and relationships regarding each entity. This additional information can be directly translated to the Physical Data Model which reduces the actual time need to implement it. Physical Data Model(PDMs)Physical Data Model are transformed Logical Data Models that include the necessary tables, columns, relationships, database properties for the creation of a database. This model also allows for considerations regarding performance, indexing and denormalization that are applied through database rules, data integrity. Further expanding on why we actually use models in modern application/database development can be seen in the benefits that data modeling provides for data modelers and projects themselves, Benefits of Data Modeling according to Applied Information Science Abstraction that allows data designers remove concepts and ideas form hard facts in the form of data. This gives the data designers the ability to express general concepts and/or ideas in a generic form through the use of symbols to represent data items and the relationships between the items. Transparency through the use of data models allows complex ideas to be translated in to simple symbols so that the concept can be understood by all viewpoints and limits the amount of confusion and misunderstanding. Effectiveness in regards to tuning a model for acceptable performance while maintaining affordable operational costs. In addition it allows systems to be built on a solid foundation in terms of data. I shudder at the thought of a world without data modeling, think about it? Data is everywhere in our lives. Data modeling allows for optimizing a design for performance and the reduction of duplication. If one was to design a database without data modeling then I would think that the first things to get impacted would be database performance due to poorly designed database and there would be greater chances of unnecessary data duplication that would also play in to the excessive query times because unneeded records would need to be processed. You could say that a data designer designing a database is like a box of chocolates. You will never know what kind of database you will get until after it is built.

    Read the article

  • Five Key Trends in Enterprise 2.0 for 2011

    - by kellsey.ruppel(at)oracle.com
    We recently sat down with Andy MacMillan, an industry veteran and vice president of product management for Enterprise 2.0 at Oracle, to get his take on the year ahead in Enterprise 2.0 (E2.0). He offered us his five predictions about the ways he believes E2.0 technologies will transform business in 2011. 1. Forward-thinking organizations will achieve an unprecedented level of organizational awareness. Enterprise 2.0 and Web 2.0 technologies have already transformed the ways customers, employees, partners, and suppliers communicate and stay informed. But this year we are anticipating that organizations will go to the next step and integrate social activities with business applications to deliver rich contextual "activity streams." Activity streams are a new way for enterprise users to get relevant information as quickly as it happens, by navigating to that information in context directly from their portal. We don't mean syndicating social activities limited to a single application. Instead, we believe back-office systems will be combined with social media tools to drive how users make informed business decisions in brand new ways. For example, an account manager might log into the company portal and automatically receive notification that colleagues are closing business around a certain product in his market segment. With a single click, he can reach out instantly to these colleagues via social media and learn from their successes to drive new business opportunities in his own area. 2. Online customer engagement will become a high priority for CMOs. A growing number of chief marketing officers (CMOs) have created a new direct report called "head of online"--a senior marketing executive responsible for all engagements with customers and prospects via the Web, mobile, and social media. This new field has been dubbed "Web experience management" or "online customer engagement" by firms and analyst organizations. It is likely to rapidly increase demand for a host of new business objectives and metrics from Web content management solutions. As companies interface with customers more and more over the Web, Web experience management solutions will help deliver more targeted interactions to ensure increased customer loyalty while meeting sales and business objectives. 3. Real composite applications will be widely adopted. We expect organizations to move from the concept of a single "uber-portal" that encompasses all the necessary features to a more modular, component-based concept for composite applications. This approach is now possible as IT and power users are empowered to assemble new, purpose-built composite applications quickly from existing components. 4. Records management will drive ECM consolidation. We continue to see a significant shift in the approach to records management. Several years ago initiatives were focused on overlaying records management across a set of electronic repositories and physical storage locations. We believe federated records management will continue, but we also expect to see records management driving conversations around single-platform content management consolidation. 5. Organizations will demand ECM at extreme scale. We have already seen a trend within IT organizations to provide a common, highly scalable infrastructure to consolidate and support content and information needs. But as data sizes grow exponentially, ECM at an extreme scale is likely to spread at unprecedented speeds this year. This makes sense as regulations and transparency requirements rise. The model in which ECM and lightweight CMS systems provide basic content services such as check-in, update, delete, and search has converged around a set of industry best practices and has even been coded into new industry standards such as content management interoperability services. As these services converge and the demand for them accelerates, organizations are beginning to rationalize investments into a single, highly scalable infrastructure. Is your organization ready for Enterprise 2.0 in 2011? Learn more.

    Read the article

  • 101 Ways to Participate...and make the future Java

    - by heathervc
     In case you missed it earlier today, and as promised in BOF6283, here are the 101 Ways to Improve (and Make the Future) Java...thanks to Bruno Souza of SouJava and Martijn Verburg of the London Java Community for their contributions! Join or create a JUG Come to the meetings Help promoting your JUG: twitter, facebook, etc Find someone that can give a talk Get your company to sponsor (a meeting, an event) Organize an activity (meetings, hackathons, dojos, etc) Answer questions on a mailing list (or simply join!) Volunteer for a small, one time tasks (creating a web page, helping with an activity) Come early to an event, and help to carry the piano Moderate a list or add things to the wiki Participate in the organization meetings or mailing lists Take pictures of an event or meeting and publish them online Write a blog about an event or meeting, to help promote the group Help record and post a session online Present your JavaOne experience when you get back Repeat the best talk you saw at JavaOne at a JUG meeting Send this list of ideas to other Java developers in your area so they can help out too! Present a step-by-step tutorial Present GreenFoot and Alice to school students Present BlueJ and Alice to university students Teach those tools to teachers and professors Write a step-by-step tutorial on your blog or to a magazine Create a page that lists resources Give a talk about your favorite Java feature or technology Learn a new Java API and present to your co-workers Then, present in a JUG meeting, and then, present it in an event in your area, and submit it to JavaOne! Create a study group to get certified or to learn some new Java technology Teach a non-Java developer how to download the basic tools and where to find more information Download and use an open source project Improve the documentation Write an article or a blog post about the project Write an FAQ Join and participate on the mailing list Describe a bug in detail and submit a bug report Fix a bug and submit it to the project Give a talk about it at a JUG meeting Teach your co-workers how to use the project Sign up to Adopt a JSR Test regular builds of the Reference Implementation (RI) Report bugs in the RI Submit Feature Requests to the spec Triage issues on the issue tracker Run a hack day to discuss the API Moderate mailing lists and forums Create an FAQ or Wiki Evangelize a specification on Twitter, G+, Hacker News, etc Give a lightning talk Help build the RI Help build the Technical Compatibility Kit (TCK) Create a Podcast Learn Latin - e.g. legal language, translate to English Sign up to Adopt OpenJDK Run a Bugathon Fix javac compiler warnings Build virtual images Add tests to Java Submit Javadoc patches Give a webbing Teach someone to build OpenJDK Hold a brown bag session at work Fix the oldest known bug Overhaul Javadoc to use HTML Load the OpenJDK into different IDEs Run a build farm node Test your code on a nightly build Learn how to read Java byte code Visit JCP.org Follow jcp_org on Twitter Friend JCP on Facebook Read JCP Blog Register for JCP.org site Create a JSR Watch List Review JSRs in progress Comment on JSRs in progress, write and track bug reports, use cases, etc Review JSRs in Maintenance Comment on JSRs in Maintenance Implement Final JSRs Review the Transparency of JSRs in progress and provide feedback to the PMO and Spec Lead/community Become a JCP Member or associate with a current JCP member Nominate to serve on an Expert Group (EG) Serve on an EG Submit a JSR proposal and become Spec Lead Take a Spec Lead role in an Inactive or Dormant JSR Nominate for an Executive Committee (EC) seat Vote in the EC elections Vote in EC Special Elections Review EC Meeting Summaries Attend Spec Lead calls Write blogs, articles on your experiences Join the EC project on java.net Join JCP.Next on java.net/JSR 358 Participate on the JCP forums and join JSR projects on java.net Suggest agenda items for open EC meetings Attend public EC teleconference (2x per year) Attend open EC meetings at JavaOne Nominate for JCP Annual Awards Attend annual JavaOne and JCP Annual Awards Ceremony Attend JCP related BOF sessions and give your feedback to Program Office Invite JCP program office members to your JUG  or meetup Invite JSR Spec Leads to your JUG or meetup And always - hold a party!

    Read the article

  • ARTS Reference Model for Retail

    - by Sanjeev Sharma
    Consider a hypothetical scenario where you have been tasked to set up retail operations for a electronic goods or daily consumables or a luxury brand etc. It is very likely you will be faced with the following questions: What are the essential business capabilities that you must have in place?  What are the essential business activities under-pinning each of the business capabilities, identified in Step 1? What are the set of steps that you need to perform to execute each of the business activities, identified in Step 2? Answers to the above will drive your investments in software and hardware to enable the core retail operations. More importantly, the choices you make in responding to the above questions will several implications in the short-run and in the long-run. In the short-term, you will incur the time and cost of defining your technology requirements, procuring the software/hardware components and getting them up and running. In the long-term, as you grow in operations organically or through M&A, partnerships and franchiser business models  you will invariably need to make more technology investments to manage the greater complexity (scale and scope) of business operations.  "As new software applications, such as time & attendance, labor scheduling, and POS transactions, just to mention a few, are introduced into the store environment, it takes a disproportionate amount of time and effort to integrate them with existing store applications. These integration projects can add up to 50 percent to the time needed to implement a new software application and contribute significantly to the cost of the overall project, particularly if a systems integrator is called in. This has been the reality that all retailers have had to live with over the last two decades. The effect of the environment has not only been to increase costs, but also to limit retailers' ability to implement change and the speed with which they can do so." (excerpt taken from here) Now, one would think a lot of retailers would have already gone through the pain of finding answers to these questions, so why re-invent the wheel? Precisely so, a major effort began almost 17 years ago in the retail industry to make it less expensive and less difficult to deploy new technology in stores and at the retail enterprise level. This effort is called the Association for Retail Technology Standards (ARTS). Without standards such as those defined by ARTS, you would very likely end up experiencing the following: Increased Time and Cost due to resource wastage arising from re-inventing the wheel i.e. re-creating vanilla processes from scratch, and incurring, otherwise avoidable, mistakes and errors by ignoring experience of others Sub-optimal Process Efficiency due to narrow, isolated view of processes thereby ignoring process inter-dependencies i.e. optimizing parts but not the whole, and resulting in lack of transparency and inter-departmental finger-pointing Embracing ARTS standards as a blue-print for establishing or managing or streamlining your retail operations can benefit you in the following ways: Improved Time-to-Market from parity with industry best-practice processes e.g. ARTS, thus avoiding “reinventing the wheel” for common retail processes and focusing more on customizing processes for differentiations, and lowering integration complexity and risk with a standardized vocabulary for exchange between internal and external i.e. partner systems Lower Operating Costs by embracing the ARTS enterprise-wide process reference model for developing and streamlining retail operations holistically instead of a narrow, silo-ed view, and  procuring IT systems in compliance with ARTS thus avoiding IT budget marginalization While parity with industry standards such as ARTS business process model by itself does not create a differentiation, it does however provide a higher starting point for bridging the strategy-execution gap in setting up and improving retail operations.

    Read the article

  • I.T. Chargeback : Core to Cloud Computing

    - by Anand Akela
    Contributed by Mark McGill Consolidation and Virtualization have been widely adopted over the years to help deliver benefits such as increased server utilization, greater agility and lower cost to the I.T. organization. These are key enablers of cloud, but in themselves they do not provide a complete cloud solution. Building a true enterprise private cloud involves moving from an admin driven world, where the I.T. department is ultimately responsible for the provisioning of servers, databases, middleware and applications, to a world where the consumers of I.T. resources can provision their infrastructure, platforms and even complete application stacks on demand. Switching from an admin-driven provisioning model to a user-driven model creates some challenges. How do you ensure that users provisioning resources will not provision more than they need? How do you encourage users to return resources when they have finished with them so that others can use them? While chargeback has existed as a concept for many years (especially in mainframe environments), it is the move to this self-service model that has created a need for a new breed of chargeback applications for cloud. Enabling self-service without some form of chargeback is like opening a shop where all of the goods are free. A successful chargeback solution will be able to allocate the costs of shared I.T. infrastructure based on the relative consumption by the users. Doing this creates transparency between the I.T. department and the consumers of I.T. When users are able to understand how their consumption translates to cost they are much more likely to be prudent when it comes to their use of I.T. resources. This also gives them control of their I.T. costs, as moderate usage will translate to a lower charge at the end of the month. Implementing Chargeback successfully create a win-win situation for I.T. and the consumers. Chargeback can help to ensure that I.T. resources are used for activities that deliver business value. It also improves the overall utilization of I.T. infrastructure as I.T. resources that are not needed are not left running idle. Enterprise Manager 12c provides an integrated metering and chargeback solution for Enterprise Manager Targets. This solution is built on top of the rich configuration and utilization information already available in Enterprise Manager. It provides metering not just for virtual machines, but also for physical hosts, databases and middleware. Enterprise Manager 12c provides metering based on the utilization and configuration of the following types of Enterprise Manager Target: Oracle VM Host Oracle Database Oracle WebLogic Server Using Enterprise Manager Chargeback, administrators are able to create a set of Charge Plans that are used to attach prices to the various metered resources. These plans can contain fixed costs (eg. $10/month/database), configuration based costs (eg. $10/month if OS is Windows) and utilization based costs (eg. $0.05/GB of Memory/hour) The self-service user provisioning these resources is then able to view a report that details their usage and helps them understand how this usage translates into cost. Armed with this information, the user is able to determine if the resources are delivering adequate business value based on what is being charged. Figure 1: Chargeback in Self-Service Portal Enterprise Manager 12c provides a variety of additional interfaces into this data. The administrator can access summary and trending reports. Summary reports allow the administrator to drill-down through the cost center hierarchy to identify, for example, the top resource consumers across the organization. Figure 2: Charge Summary Report Trending reports can be used for I.T. planning and budgeting as they show utilization and charge trends over a period of time. Figure 3: CPU Trend Report We also provide chargeback reports through BI Publisher. This provides a way for users who do not have an Enterprise Manager login (such as Line of Business managers) to view charge and usage information. For situations where a bill needs to be produced, chargeback can be integrated with billing applications such as Oracle Billing and Revenue Management (BRM). Further information on Enterprise Manager 12c’s integrated metering and chargeback: White Paper Screenwatch Cloud Management on OTN

    Read the article

  • Rounded Corners and Shadows &ndash; Dialogs with CSS

    - by Rick Strahl
    Well, it looks like we’ve finally arrived at a place where at least all of the latest versions of main stream browsers support rounded corners and box shadows. The two CSS properties that make this possible are box-shadow and box-radius. Both of these CSS Properties now supported in all the major browsers as shown in this chart from QuirksMode: In it’s simplest form you can use box-shadow and border radius like this: .boxshadow { -moz-box-shadow: 3px 3px 5px #535353; -webkit-box-shadow: 3px 3px 5px #535353; box-shadow: 3px 3px 5px #535353; } .roundbox { -moz-border-radius: 6px 6px 6px 6px; -webkit-border-radius: 6px; border-radius: 6px 6px 6px 6px; } box-shadow: horizontal-shadow-pixels vertical-shadow-pixels blur-distance shadow-color box-shadow attributes specify the the horizontal and vertical offset of the shadow, the blur distance (to give the shadow a smooth soft look) and a shadow color. The spec also supports multiple shadows separated by commas using the attributes above but we’re not using that functionality here. box-radius: top-left-radius top-right-radius bottom-right-radius bottom-left-radius border-radius takes a pixel size for the radius for each corner going clockwise. CSS 3 also specifies each of the individual corner elements such as border-top-left-radius, but support for these is much less prevalent so I would recommend not using them for now until support improves. Instead use the single box-radius to specify all corners. Browser specific Support in older Browsers Notice that there are two variations: The actual CSS 3 properties (box-shadow and box-radius) and the browser specific ones (-moz, –webkit prefixes for FireFox and Chrome/Safari respectively) which work in slightly older versions of modern browsers before official CSS 3 support was added. The goal is to spread support as widely as possible and the prefix versions extend the range slightly more to those browsers that provided early support for these features. Notice that box-shadow and border-radius are used after the browser specific versions to ensure that the latter versions get precedence if the browser supports both (last assignment wins). Use the .boxshadow and .roundbox Styles in HTML To use these two styles create a simple rounded box with a shadow you can use HTML like this: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext"> Simple Rounded Corner Box. </div> </div> which looks like this in the browser: This works across browsers and it’s pretty sweet and simple. Watch out for nested Elements! There are a couple of things to be aware of however when using rounded corners. Specifically, you need to be careful when you nest other non-transparent content into the rounded box. For example check out what happens when I change the inside <div> to have a colored background: <!-- Simple Box with rounded corners and shadow --> <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> which renders like this:   If you look closely you’ll find that the inside <div>’s corners are not rounded and so ‘poke out’ slightly over the rounded corners. It looks like the rounded corners are ‘broken’ up instead of a solid rounded line around the corner, which his pretty ugly. The bigger the radius the more drastic this effect becomes . To fix this issue the inner <div> also has have rounded corners at the same or slightly smaller radius than the outer <div>. The simple fix for this is to simply also apply the roundbox style to the inner <div> in addition to the boxcontenttext style already applied: <div class="boxcontenttext roundbox" style="background: khaki;"> The fixed display now looks proper: Separate Top and Bottom Elements This gets even a little more tricky if you have an element at the top or bottom only of the rounded box. What if you need to add something like a header or footer <div> that have non-transparent backgrounds which is a pretty common scenario? In those cases you want only the top or bottom corners rounded and not both. To make this work a couple of additional styles to round only the top and bottom corners can be created: .roundbox-top { -moz-border-radius: 4px 4px 0 0; -webkit-border-radius: 4px 4px 0 0; border-radius: 4px 4px 0 0; } .roundbox-bottom { -moz-border-radius: 0 0 4px 4px; -webkit-border-radius: 0 0 4px 4px; border-radius: 0 0 4px 4px; } Notice that radius used for the ‘inside’ rounding is smaller (4px) than the outside radius (6px). This is so the inner radius fills into the outer border – if you use the same size you may have some white space showing between inner and out rounded corners. Experiment with values to see what works – in my experimenting the behavior across browsers here is consistent (thankfully). These styles can be applied in addition to other styles to make only the top or bottom portions of an element rounded. For example imagine I have styles like this: .gridheader, .gridheaderbig, .gridheaderleft, .gridheaderright { padding: 4px 4px 4px 4px; background: #003399 url(images/vertgradient.png) repeat-x; text-align: center; font-weight: bold; text-decoration: none; color: khaki; } .gridheaderleft { text-align: left; } .gridheaderright { text-align: right; } .gridheaderbig { font-size: 135%; } If I just apply say gridheader by itself in HTML like this: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft">Box with a Header</div> <div class="boxcontenttext" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> This results in a pretty funky display – again due to the fact that the inner elements render square rather than rounded corners: If you look close again you can see that both the header and the main content have square edges which jumps out at the eye. To fix this you can now apply the roundbox-top and roundbox-bottom to the header and content respectively: <div class="roundbox boxshadow" style="width: 550px; border: solid 2px steelblue"> <div class="gridheaderleft roundbox-top">Box with a Header</div> <div class="boxcontenttext roundbox-bottom" style="background: khaki;"> Simple Rounded Corner Box. </div> </div> Which now gives the proper display with rounded corners both on the top and bottom: All of this is sweet to be supported – at least by the newest browser – without having to resort to images and nasty JavaScripts solutions. While this is still not a mainstream feature yet for the majority of actually installed browsers, the majority of browser users are very likely to have this support as most browsers other than IE are actively pushing users to upgrade to newer versions. Since this is a ‘visual display only feature it degrades reasonably well in non-supporting browsers: You get an uninteresting square and non-shadowed browser box, but the display is still overall functional. The main sticking point – as always is Internet Explorer versions 8.0 and down as well as older versions of other browsers. With those browsers you get a functional view that is a little less interesting to look at obviously: but at least it’s still functional. Maybe that’s just one more incentive for people using older browsers to upgrade to a  more modern browser :-) Creating Dialog Related Styles In a lot of my AJAX based applications I use pop up windows which effectively work like dialogs. Using the simple CSS behaviors above, it’s really easy to create some fairly nice looking overlaid windows with nothing but CSS. Here’s what a typical ‘dialog’ I use looks like: The beauty of this is that it’s plain CSS – no plug-ins or images (other than the gradients which are optional) required. Add jQuery-ui draggable (or ww.jquery.js as shown below) and you have a nice simple inline implementation of a dialog represented by a simple <div> tag. Here’s the HTML for this dialog: <div id="divDialog" class="dialog boxshadow" style="width: 450px;"> <div class="dialog-header"> <div class="closebox"></div> User Sign-in </div> <div class="dialog-content"> <label>Username:</label> <input type="text" name="txtUsername" value=" " /> <label>Password</label> <input type="text" name="txtPassword" value=" " /> <hr /> <input type="button" id="btnLogin" value="Login" /> </div> <div class="dialog-statusbar">Ready</div> </div> Most of this behavior is driven by the ‘dialog’ styles which are fairly basic and easy to understand. They do use a few support images for the gradients which are provided in the sample I’ve provided. Here’s what the CSS looks like: .dialog { background: White; overflow: hidden; border: solid 1px steelblue; -moz-border-radius: 6px 6px 4px 4px; -webkit-border-radius: 6px 6px 4px 4px; border-radius: 6px 6px 3px 3px; } .dialog-header { background-image: url(images/dialogheader.png); background-repeat: repeat-x; text-align: left; color: cornsilk; padding: 5px; padding-left: 10px; font-size: 1.02em; font-weight: bold; position: relative; -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-top { -moz-border-radius: 4px 4px 0px 0px; -webkit-border-radius: 4px 4px 0px 0px; border-radius: 4px 4px 0px 0px; } .dialog-bottom { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; } .dialog-content { padding: 15px; } .dialog-statusbar, .dialog-toolbar { background: #eeeeee; background-image: url(images/dialogstrip.png); background-repeat: repeat-x; padding: 5px; padding-left: 10px; border-top: solid 1px silver; border-bottom: solid 1px silver; font-size: 0.8em; } .dialog-statusbar { -moz-border-radius: 0 0 3px 3px; -webkit-border-radius: 0 0 3px 3px; border-radius: 0 0 3px 3px; padding-right: 10px; } .closebox { position: absolute; right: 2px; top: 2px; background-image: url(images/close.gif); background-repeat: no-repeat; width: 14px; height: 14px; cursor: pointer; opacity: 0.60; filter: alpha(opacity="80"); } .closebox:hover { opacity: 1; filter: alpha(opacity="100"); } The main style is the dialog class which is the outer box. It has the rounded border that serves as the outline. Note that I didn’t add the box-shadow to this style because in some situations I just want the rounded box in an inline display that doesn’t have a shadow so it’s still applied separately. dialog-header, then has the rounded top corners and displays a typical dialog heading format. dialog-bottom and dialog-top then provide the same functionality as roundbox-top and roundbox-bottom described earlier but are provided mainly in the stylesheet for consistency to match the dialog’s round edges and making it easier to  remember and find in Intellisense as it shows up in the same dialog- group. dialog-statusbar and dialog-toolbar are two elements I use a lot for floating windows – the toolbar serves for buttons and options and filters typically, while the status bar provides information specific to the floating window. Since the the status bar is always on the bottom of the dialog it automatically handles the rounding of the bottom corners. Finally there’s  closebox style which is to be applied to an empty <div> tag in the header typically. What this does is render a close image that is by default low-lighted with a low opacity value, and then highlights when hovered over. All you’d have to do handle the close operation is handle the onclick of the <div>. Note that the <div> right aligns so typically you should specify it before any other content in the header. Speaking of closable – some time ago I created a closable jQuery plug-in that basically automates this process and can be applied against ANY element in a page, automatically removing or closing the element with some simple script code. Using this you can leave out the <div> tag for closable and just do the following: To make the above dialog closable (and draggable) which makes it effectively and overlay window, you’d add jQuery.js and ww.jquery.js to the page: <script type="text/javascript" src="../../scripts/jquery.min.js"></script> <script type="text/javascript" src="../../scripts/ww.jquery.min.js"></script> and then simply call: <script type="text/javascript"> $(document).ready(function () { $("#divDialog") .draggable({ handle: ".dialog-header" }) .closable({ handle: ".dialog-header", closeHandler: function () { alert("Window about to be closed."); return true; // true closes - false leaves open } }); }); </script> * ww.jquery.js emulates base features in jQuery-ui’s draggable. If jQuery-ui is loaded its draggable version will be used instead and voila you have now have a draggable and closable window – here in mid-drag:   The dragging and closable behaviors are of course optional, but it’s the final touch that provides dialog like window behavior. Relief for older Internet Explorer Versions with CSS Pie If you want to get these features to work with older versions of Internet Explorer all the way back to version 6 you can check out CSS Pie. CSS Pie provides an Internet Explorer behavior file that attaches to specific CSS rules and simulates these behavior using script code in IE (mostly by implementing filters). You can simply add the behavior to each CSS style that uses box-shadow and border-radius like this: .boxshadow {     -moz-box-shadow: 3px 3px 5px #535353;     -webkit-box-shadow: 3px 3px 5px #535353;           box-shadow: 3px 3px 5px #535353;     behavior: url(scripts/PIE.htc);           } .roundbox {      -moz-border-radius: 6px 6px 6px 6px;     -webkit-border-radius: 6px;      border-radius: 6px 6px 6px 6px;     behavior: url(scripts/PIE.htc); } CSS Pie requires the PIE.htc on your server and referenced from each CSS style that needs it. Note that the url() for IE behaviors is NOT CSS file relative as other CSS resources, but rather PAGE relative , so if you have more than one folder you probably need to reference the HTC file with a fixed path like this: behavior: url(/MyApp/scripts/PIE.htc); in the style. Small price to pay, but a royal pain if you have a common CSS file you use in many applications. Once the PIE.htc file has been copied and you have applied the behavior to each style that uses these new features Internet Explorer will render rounded corners and box shadows! Yay! Hurray for box-shadow and border-radius All of this functionality is very welcome natively in the browser. If you think this is all frivolous visual candy, you might be right :-), but if you take a look on the Web and search for rounded corner solutions that predate these CSS attributes you’ll find a boatload of stuff from image files, to custom drawn content to Javascript solutions that play tricks with a few images. It’s sooooo much easier to have this functionality built in and I for one am glad to see that’s it’s finally becoming standard in the box. Still remember that when you use these new CSS features, they are not universal, and are not going to be really soon. Legacy browsers, especially old versions of Internet Explorer that can’t be updated will continue to be around and won’t work with this shiny new stuff. I say screw ‘em: Let them get a decent recent browser or see a degraded and ugly UI. We have the luxury with this functionality in that it doesn’t typically affect usability – it just doesn’t look as nice. Resources Download the Sample The sample includes the styles and images and sample page as well as ww.jquery.js for the draggable/closable example. Online Sample Check out the sample described in this post online. Closable and Draggable Documentation Documentation for the closeable and draggable plug-ins in ww.jquery.js. You can also check out the full documentation for all the plug-ins contained in ww.jquery.js here. © Rick Strahl, West Wind Technologies, 2005-2011Posted in HTML  CSS  

    Read the article

  • Language Club – Battle of the Dynamic Languages

    - by Ben Griswold
    After dedicating the last eight weeks to learning Ruby, it’s time to move onto another language.  I really dig Ruby.  I really enjoy its dynamism and expressiveness and always-openness and it’s been the highlight of our coding club for me so far. But that’s just my take on the language.  I know a lot of coders who’s stomachs turn with the mere thought of Ruby.  They say it’s Ruby’s openness which has them feeling uneasy.  I’d say “write a bunch of tests and get over it,” but I figure there must be more to it than always open classes and possible method collisions. Yes, there’s something else to it alright. The folks who didn’t fall head over heals for Ruby are already in love with Python.  You might remember that Python was the first language we tackled in our coding club.  My time with Python was okay but it didn’t feel as natural to me as Ruby.  But let’s say we started with Ruby and then moved onto Python.  Would I see Python in a different light right now.  Might I even prefer Python over Ruby?  I suppose it’s possible but it’s pretty tough to test that theory – unless we visit Python for a second time. That’s right. The language club is going to focus on Python again and in my attempt to learn Python – yet again – in the open, I’ll be posting my solutions here just as I did for Ruby.  We don’t always have second chances so I going about this relearning with two primary goals in mind:  First, I’m going to use IronPython and the IronPython tools which provide a Python code editor, a file-based project system, and an interactive Python interpreter, all inside Visual Studio 2010.  As a note, the IronPython tools are now part of the main IronPython installer which is Version 2.7 Alpha 1 (not the latest stable version, 2.6.1) and I’d be crazy not to use them.  Second, I’d like to make sure I’m still learning Python without a complete MS skew so I’m going to run my code through Eclipse using the PyDev plugin as well.  Heck, I might use IDLE too. I already have this setup on my machine so it’s no big deal. Okay, that’s it for now.  I worked on the first ten Euler problems last night and the solutions will be posted shortly. Wish me luck.

    Read the article

  • Setting up OpenGL camera with off-center perspective

    - by user5484
    Hi, I'm using OpenGL ES (in iOS) and am struggling with setting up a viewport with an off-center distance point. Consider a game where you have a character in the left hand side of the screen, and some controls alpha'd over the left-hand side. The "main" part of the screen is on the right, but you still want to show whats in the view on the left. However when the character moves "forward" you want the character to appear to be going "straight", or "up" on the device, and not heading on an angle to the point that is geographically at the mid-x position in the screen. Here's the jist of how i set my viewport up where it is centered in the middle: // setup the camera // glMatrixMode(GL_PROJECTION); glLoadIdentity(); const GLfloat zNear = 0.1; const GLfloat zFar = 1000.0; const GLfloat fieldOfView = 90.0; // can definitely adjust this to see more/less of the scene GLfloat size = zNear * tanf(DEGREES_TO_RADIANS(fieldOfView) / 2.0); CGRect rect; rect.origin = CGPointMake(0.0, 0.0); rect.size = CGSizeMake(backingWidth, backingHeight); glFrustumf(-size, size, -size / (rect.size.width / rect.size.height), size / (rect.size.width / rect.size.height), zNear, zFar); glMatrixMode(GL_MODELVIEW); // rotate the whole scene by the tilt to face down on the dude const float tilt = 0.3f; const float yscale = 0.8f; const float zscale = -4.0f; glTranslatef(0.0, yscale, zscale); const int rotationMinDegree = 0; const int rotationMaxDegree = 180; glRotatef(tilt * (rotationMaxDegree - rotationMinDegree) / 2, 1.0f, 0.0f, 0.0f); glTranslatef(0, -yscale, -zscale); static float b = -25; //0; static float c = 0; // rotate by to face in the direction of the dude float a = RADIANS_TO_DEGREES(-atan2f(-gCamera.orientation.x, -gCamera.orientation.z)); glRotatef(a, 0.0, 1.0, 0.0); // and move to where it is glTranslatef(-gCamera.pos.x, -gCamera.pos.y, -gCamera.pos.z); // draw the rest of the scene ... I've tried a variety of things to make it appear as though "the dude" is off to the right: - do a translate after the frustrum to the x direction - do a rotation after the frustrum about the up/y-axis - move the camera with a biased lean to the left of the dude Nothing i do seems to produce good results, the dude will either look like he's stuck on an angle, or the whole scene will appear tilted. I'm no OpenGL expert, so i'm hoping someone can suggest some ideas or tricks on how to "off-center" these model views in OpenGL. Thanks!

    Read the article

  • Silverlight Cream for March 07, 2011 -- #1055

    - by Dave Campbell
    In this Issue: Max Paulousky, Chris Rouw, David Anson, Jesse Liberty, Shawn Wildermuth, Simon Guindon, and Dhananjay Kumar. Above the Fold: Silverlight: "Faster Databinding in WPF and Silverlight using OptimizedObservableCollection" Simon Guindon WP7: "Phoney Tools Updated (WP7 Open Source Library)" Shawn Wildermuth From SilverlightCream.com: Problems With Sharing Windows Phone 7 Applications Within A Large Group Of Beta Testers Max Paulousky has a post up discussing the issues surrounding beta testing a WP7 app with a large group of testers... and how to pull it all off. WP7 Insights #1: Consuming REST APIs within a WP7 app Chris Rouw is beginning a WP7 series based on his recent experience of getting a client's app into the marketplace. This first in his series is on consuming REST APIs ... lots of good code and explanations. Improving Windows Phone 7 application performance is even easier with these LowProfileImageLoader and DeferredLoadListBox updates David Anson has an update to his LowProfileImageLoader and DeferredLoadListBox after issues brought up by readers... so we all win with the great feedback from alert devs. When Isolated Storage Isn’t Enough Jesse Liberty started looking at Jeremy Likness' Sterling with this post in the WP7 From Scratch series. He starts with downloading it from CodePlex ... great way to get into Sterling if you haven't already. Phoney Tools Updated (WP7 Open Source Library) Shawn Wildermuth has the latest drop of his Phoney Tools up... this is the last Alpha. I've added a tag for it as well. He's fixed some things, added others... check out the post and go grab the code. Faster Databinding in WPF and Silverlight using OptimizedObservableCollection Simon Guindon is a blogger I've not been following, but this post on an OptimizedObservableCollection caught my eye. He added an AddRange() to the ObservableCollection to get a speed enhancement when adding items... and a pretty good speed enhancement it is. Reading files asynchronously using WebClient class in Silverlight Dhananjay Kumar is another prolific blogger that I've not been following, so we'll start with his latest... a step-by-step guide to reading an XML file asynchronously. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Oracle Ebusiness Suite 12.1.3 Oracle VM templates

    - by wcoekaer
    Steven Chan just published a great blog entry that talks about the release of a new set of Oracle VM templates. Oracle Ebusiness Suite 12.1.3. You can find the blog post here. Templates are available for: E-Business Suite 12.1.3 Vision (64-bit) E-Business Suite 12.1.3 Production (32-bit) E-Business Suite 12.x Sparse Middle Tiers (32-bit and 64-bit) Thanks Steven! Why does this stuff matter? Well, in general, virtualization (or cloud) solutions provide an easy way to create Virtual Machines. Whether it's through a "cloud api" or just a virtualization API. But all you end up with, in the end, is still just a Virtual Machine... Maybe with an OS pre-installed/pre-configured. So you have flexibility of moving VMs around and providing a VM but what about the actual applications (anything more than a very basic app)? The application administrator then still has to go and install and configure the OS for that application and install the application and its patches and basic configuration so that the application user then can go in. Building gold images for complex software stacks that are not owned by the users/admins is always very difficult. With our templates, we provide a number of things : Oracle Linux pre-installed and pre-configured with the minimum required packages for that application to run. (so it's secure) Oracle Linux can be distributed and used for free or with a support subscription. There is no trial license, there is no registration key, no alpha version or community version versus enterprise version. You get what we provide in our engineered systems, what we provide support for, without change. Supported out of the box. No virtual Trial appliances, no prototypes, no POC. What you download is production ready without change. The applications are installed by the developers of the application. The database team builds database templates, the applications engineering team builds applications templates. The first boot/configuration scripts ask for the basic information such as hostname, ip address, user passwords and then go off and set everything up correctly. All tested together - application - operating system - hypervisor. not 3 (or more) products from 3(or more) different companies.

    Read the article

  • How to get my IR remote to work? Lirc can't see it

    - by user1234567
    I'm using Ubuntu 11.10 (amd64) and I'm trying to get my infrared remote control working. The IR device is a part of a DVB-T USB stick (Based on a RTL2832u chip). I'm using these drivers - it's the only way of getting this device to work under 11.10 that I found. It's a big impromevent from previous Ubuntu version, where I had to edit the driver's code. The device works quite great - and the IR part of it works, too. The driver's page says that the code it's in alpha stage, but I'm pretty sure that my issue has nothing to do with that. If, and only if driver's module is loaded with parameter rtl2832u_rc_mode=2 (which means "use NEC protocol for IR") the remote kind of works, I can see this by running cat /dev/.. ../input6 - when I press a button, random letters appear. The remote works just like a keyboard, but keys are totally messed up - when I press '5' the volume goes down, etc. I would like to use Lirc to fix that, but Lirc can't detect my device (i.e. irw shows nothing). I suspect, it's because something gets into control of the device and sets it up as a keyboard. Lirc seems to be working, it's KDE settings module works too, but it just doesn't detect the device. The Lirc page describes this issue, but since 2009 - the last year when that page was updated, Ubuntu moved from HAL (described there) to DeviceKit, rendering provided instruction useless. I had a similar issue with my previous remote, but the keys were not messed up so much - the remote was usable, so I gave up trying to get Lirc working. I tried the answer provided here, but it changed nothing. I also tried forcing lircd to use my device, but this didn't work too: for i in /sys/class/input/input* ; do echo -n "$(basename "$i"): "; cat "$i/name"; done shows input0: Power Button input1: Power Button input2: Logitech Logitech USB Keyboard input3: A4Tech PS/2+USB Mouse input6: IR-receiver inside an USB DVB receiver But when I run: lircd -n --device=name='IR*' as root (also tried with the full name) I always see: lircd-0.9.0[3983]: lircd(default) ready, using /var/run/lirc/lircd lircd-0.9.0[3983]: accepted new client on /var/run/lirc/lircd lircd-0.9.0[3983]: could not get file information for name=IR* lircd-0.9.0[3983]: default_init(): No such file or directory lircd-0.9.0[3983]: Failed to initialize hardware So, how to set up Lirc with devinput driver in such case?

    Read the article

  • Make Firefox Show Google Results for Default Address Bar Searches

    - by The Geek
    Have you ever typed something incorrectly into the Firefox address bar, and then had it take you to a page you weren’t expecting? The reason is because Firefox uses Google’s “I’m Feeling Lucky” search, but you can change it. Scratching your head? Let’s take a quick run through what we’re talking about… Normally, if you typed in something like just “howtogeek” in the address bar, and then hit enter… you’ll be taken directly to the How-To Geek site. But how? Very simple! It’s the same place you would have been taken to if you typed “howtogeek” into Google, and then clicked the “I’m Feeling Lucky” button, which takes you to the first result. This is what Firefox does behind the scenes when you put something into the address bar that isn’t a URL. But what if you’d rather head to the search results page instead? Luckily, all you have to do is tweak an about:config parameter in Firefox. Just head into about:config in the address bar, and then filter for keyword.url like so: Double-click on the entry in the list, and then delete the &gfns=1 from the value. That’s the part of the URL that triggers Google to redirect to the first result. And now, the next time you type something into the address bar, either on purpose or because you typo’d it, you’ll be taken to the results page instead: About:Config tweaking is lots of fun. Similar Articles Productive Geek Tips Make Firefox Quick Search Use Google’s Beta Search KeysMake Firefox Built-In Search Box Use Google’s Experimental Search KeysCombine Wolfram Alpha & Google Search Results in FirefoxHow To Run 4 Different Google Searches at Once In the Same TabChange Default Feed Reader in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

    Read the article

  • ATI (fglrx) Dual monitor / laptop hot-plugging

    - by Brendan Piater
    I feel like I've gone back 5 years on my desktop today. I'll try not dump to much frustration here... I been running 12.04 since alpha with the ATI open source drivers and the gnome 3 desktop. I been generally very happy with them with only small issues along the way. Now of course it does not support 3D acceleration 100%, so games like my newly purchased Amnesia from the Humble bundle would not play. OK, no worries, the ATI driver is in the repos so let me have a go I thought. With all this testing that's been done with multi-monitor support, what could go wrong...? How I use my computer: It's laptop, with a HD 3670 card in it. I spend about 50% of the time working directly on the laptop (at home) and about 50% of the time working with an additional display connected (at work), multi desktop environment. What happening now: installed drivers things seemed to working, save some small other bugs (not critical) this morning I take my machine and plug the additional monitor into it, and nothing happens... ok fine. open "displays" try configure dual display, won't work open ati config "thing" (cause it is a thing, a crap thing) and set-up monitors there reboot it says (oh ffs, really.... ok) reboot, login and wow, I got a gnome 2 desktop (presume gnome 3 fall back) and no multi-monitor...great. (screenshot: http://ubuntuone.com/5tFe3QNFsTSIGvUSVLsyL7 ) after getting into a situation where I had to Ctrl + Alt + Del to get out of a frozen display, I eventually manage to set-up a single display desktop on the "main" monitor ok.. time to go home... unplug monitor... nothing happens.. oh boy here we go... try displays again, nothing, just hangs the display.. great. crash all the apps and reboot... So it's been a trying day... What I really hope is that someone else has figured out how to avoid this PAIN. Please help with a solution that: allows me run fglrx (so I can run the games I want) allows me to hot-plug a monitor to my laptop and remove it again allows me to change the display so include the hot-plugged monitor (preferable automatically like it did with the open drivers) Next best if that's not possible: switch between laptop only display and monitor only display easily (i.e. not having to reboot/logout/suspened etc) Really appreciate the time of anyone that has a solution. Thanks in advance. Regards Brendan PS: I guess I should file a bug about this too, so some direction as to the best place to file this would be appreciated too.

    Read the article

  • Drawing isometric map in canvas / javascript

    - by Dave
    I have a problem with my map design for my tiles. I set player position which is meant to be the middle tile that the canvas is looking at. How ever the calculation to put them in x:y pixel location is completely messed up for me and i don't know how to fix it. This is what i tried: var offset_x = 0; //used for scrolling on x var offset_y = 0; //used for scrolling on y var prev_mousex = 0; //for movePos function var prev_mousey = 0; //for movePos function function movePos(e){ if (prev_mousex === 0 && prev_mousey === 0) { prev_mousex = e.pageX; prev_mousey = e.pageY; } offset_x = offset_x + (e.pageX - prev_mousex); offset_y = offset_y + (e.pageY - prev_mousey); prev_mousex = e.pageX; prev_mousey = e.pageY; run = true; } player_posx = 5; player_posy = 55; ct = 19; for (i = (player_posx-ct); i < (player_posx+ct); i++){ //horizontal for (j=(player_posy-ct); j < (player_posy+ct); j++){ // vertical //img[0] is 64by64 but the graphic is 64by32 the rest is alpha space var x = (i-j)*(img[0].height/2) + (canvas.width/2)-(img[0].width/2); var y = (i+j)*(img[0].height/4); var abposx = x - offset_x; var abposy = y - offset_y; ctx.drawImage(img[0],abposx,abposy); } } Now based on these numbers the first render-able tile is I = 0 & J = 36. As numbers in the negative are not in the array. But for I=0 and J= 36 the position it calculates is : -1120 : 592 Does any one know how to center it to canvas view properly?

    Read the article

  • Engine Rendering pipeline : Making shaders generic

    - by fakhir
    I am trying to make a 2D game engine using OpenGL ES 2.0 (iOS for now). I've written Application layer in Objective C and a separate self contained RendererGLES20 in C++. No GL specific call is made outside the renderer. It is working perfectly. But I have some design issues when using shaders. Each shader has its own unique attributes and uniforms that need to be set just before the main draw call (glDrawArrays in this case). For instance, in order to draw some geometry I would do: void RendererGLES20::render(Model * model) { // Set a bunch of uniforms glUniformMatrix4fv(.......); // Enable specific attributes, can be many glEnableVertexAttribArray(......); // Set a bunch of vertex attribute pointers: glVertexAttribPointer(positionSlot, 2, GL_FLOAT, GL_FALSE, stride, m->pCoords); // Now actually Draw the geometry glDrawArrays(GL_TRIANGLES, 0, m->vertexCount); // After drawing, disable any vertex attributes: glDisableVertexAttribArray(.......); } As you can see this code is extremely rigid. If I were to use another shader, say ripple effect, i would be needing to pass extra uniforms, vertex attribs etc. In other words I would have to change the RendererGLES20 render source code just to incorporate the new shader. Is there any way to make the shader object totally generic? Like What if I just want to change the shader object and not worry about game source re-compiling? Any way to make the renderer agnostic of uniforms and attributes etc?. Even though we need to pass data to uniforms, what is the best place to do that? Model class? Is the model class aware of shader specific uniforms and attributes? Following shows Actor class: class Actor : public ISceneNode { ModelController * model; AIController * AI; }; Model controller class: class ModelController { class IShader * shader; int textureId; vec4 tint; float alpha; struct Vertex * vertexArray; }; Shader class just contains the shader object, compiling and linking sub-routines etc. In Game Logic class I am actually rendering the object: void GameLogic::update(float dt) { IRenderer * renderer = g_application->GetRenderer(); Actor * a = GetActor(id); renderer->render(a->model); } Please note that even though Actor extends ISceneNode, I haven't started implementing SceneGraph yet. I will do that as soon as I resolve this issue. Any ideas how to improve this? Related design patterns etc? Thank you for reading the question.

    Read the article

  • Map and fill texture using PBO (OpenGL 3.3)

    - by NtscCobalt
    I'm learning OpenGL 3.3 trying to do the following (as it is done in D3D)... Create Texture of Width, Height, Pixel Format Map texture memory Loop write pixels Unmap texture memory Set Texture Render Right now though it renders as if the entire texture is black. I can't find a reliable source for information on how to do this though. Almost every tutorial I've found just uses glTexSubImage2D and passes a pointer to memory. Here is basically what my code does... (In this case it is generating an 1-byte Alpha Only texture but it is rendering it as the red channel for debugging) GLuint pixelBufferID; glGenBuffers(1, &pixelBufferID); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, pixelBufferID); glBufferData(GL_PIXEL_UNPACK_BUFFER, 512 * 512 * 1, nullptr, GL_STREAM_DRAW); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); GLuint textureID; glGenTextures(1, &textureID); glBindTexture(GL_TEXTURE_2D, textureID); glTexImage2D(GL_TEXTURE_2D, 0, GL_R8, 512, 512, 0, GL_RED, GL_UNSIGNED_BYTE, nullptr); glBindTexture(GL_TEXTURE_2D, 0); glBindTexture(GL_TEXTURE_2D, textureID); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, pixelBufferID); void *Memory = glMapBuffer(GL_PIXEL_UNPACK_BUFFER, GL_WRITE_ONLY); // Memory copied here, I know this is valid because it is the same loop as in my working D3D version glUnmapBuffer(GL_PIXEL_UNPACK_BUFFER); glBindBuffer(GL_PIXEL_UNPACK_BUFFER, 0); And then here is the render loop. // This chunk left in for completeness glUseProgram(glProgramId); glBindVertexArray(glVertexArrayId); glBindBuffer(GL_ARRAY_BUFFER, glVertexBufferId); glEnableVertexAttribArray(0); glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, 20, 0); glVertexAttribPointer(0, 2, GL_FLOAT, GL_FALSE, 20, 12); GLuint transformLocationID = glGetUniformLocation(3, 'transform'); glUniformMatrix4fv(transformLocationID , 1, true, somematrix) // Not sure if this is all I need to do glBindTexture(GL_TEXTURE_2D, pTex->glTextureId); GLuint textureLocationID = glGetUniformLocation(glProgramId, "texture"); glUniform1i(textureLocationID, 0); glDrawArrays(GL_TRIANGLES, Offset*3, Triangles*3); Vertex Shader #version 330 core in vec3 Position; in vec2 TexCoords; out vec2 TexOut; uniform mat4 transform; void main() { TexOut = TexCoords; gl_Position = vec4(Position, 1.0) * transform; } Pixel Shader #version 330 core uniform sampler2D texture; in vec2 TexCoords; out vec4 fragColor; void main() { // Output color fragColor.r = texture2D(texture, TexCoords).r; fragColor.g = 0.0f; fragColor.b = 0.0f; fragColor.a = 1.0; }

    Read the article

  • How can I attach a model to the bone of another model?

    - by kaykayman
    I am trying to attach one animated model to one of the bones of another animated model in an XNA game. I've found a few questions/forum posts/articles online which explain how to attach a weapon model to the bone of another model (which is analogous to what I'm trying to achieve), but they don't seem to work for me. So as an example: I want to attach Model A to a specific bone in Model B. Question 1. As I understand it, I need to calculate the transforms which are applied to the bone on Model B and apply these same transforms to every bone in Model A. Is this right? Question 2. This is my code for calculating the Transforms on a specific bone. private Matrix GetTransformPaths(ModelBone bone) { Matrix result = Matrix.Identity; while (bone != null) { result = result * bone.Transform; bone = bone.Parent; } return result; } The maths of Matrices is almost entirely lost on me, but my understanding is that the above will work its way up the bone structure to the root bone and my end result will be the transform of the original bone relative to the model. Is this right? Question 3. Assuming that this is correct I then expect that I should either apply this to each bone in Model A, or in my Draw() method: private void DrawModel(SceneModel model, GameTime gametime) { foreach (var component in model.Components) { Matrix[] transforms = new Matrix[component.Model.Bones.Count]; component.Model.CopyAbsoluteBoneTransformsTo(transforms); Matrix parenttransform = Matrix.Identity; if (!string.IsNullOrEmpty(component.ParentBone)) parenttransform = GetTransformPaths(model.GetBone(component.ParentBone)); component.Player.Update(gametime.ElapsedGameTime, true, Matrix.Identity); Matrix[] bones = component.Player.GetSkinTransforms(); foreach (SkinnedEffect effect in mesh.Effects) { effect.SetBoneTransforms(bones); effect.EnableDefaultLighting(); effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(MathHelper.ToRadians(model.Angle)) * Matrix.CreateTranslation(model.Position) * parenttransform; effect.View = getView(); effect.Projection = getProjection(); effect.Alpha = model.Opacity; } } mesh.Draw(); } I feel as though I have tried every conceivable way of incorporating the parenttransform value into the draw method. The above is my most recent attempt. Is what I'm trying to do correct? And if so, is there a reason it doesn't work? The above Draw method seems to transpose the models x/z position - but even at these wrong positions, they do not account for the animation of Model B at all. Note: As will be evident from the code my "model" is comprised of a list of "components". It is these "components" that correspond to a single "Microsoft.Xna.Framework.Graphics.Model"

    Read the article

  • Drawing lots of tiles with OpenGL, the modern way

    - by Nic
    I'm working on a small tile/sprite-based PC game with a team of people, and we're running into performance issues. The last time I used OpenGL was around 2004, so I've been teaching myself how to use the core profile, and I'm finding myself a little confused. I need to draw in the neighborhood of 250-750 48x48 tiles to the screen every frame, as well as maybe around 50 sprites. The tiles only change when a new level is loaded, and the sprites are changing all the time. Some of the tiles are made up of four 24x24 pieces, and most (but not all) of the sprites are the same size as the tiles. A lot of the tiles and sprites use alpha blending. Right now I'm doing all of this in immediate mode, which I know is a bad idea. All the same, when one of our team members tries to run it, he gets very bad frame rates (~20-30 fps), and it's much worse when there are more tiles, especially when a lot of those tiles are the kind that are cut into pieces. This all makes me think that the problem is the number of draw calls being made. I've thought of a few possible solutions to this, but I wanted to run them by some people who know what they're talking about so I don't waste my time on something stupid: TILES: When a level is loaded, draw all the tiles once into a frame buffer attached to a big honking texture, and just draw a big rectangle with that texture on it every frame. Put all the tiles into a static vertex buffer when the level is loaded, and draw them that way. I don't know if there's a way to draw objects with different textures with a single call to glDrawElements, or if this is even something I'd want to do. Maybe just put all the tiles into a big giant texture and use funny texture coordinates in the VBO? SPRITES: Draw each sprite with a separate call to glDrawElements. Use a dynamic VBO somehow. Same texture question as number 2 above. Point sprites? This is probably silly. Are any of these ideas sensible? Is there a good implementation somewhere I could look over?

    Read the article

  • Masking OpenGL texture by a pattern

    - by user1304844
    Tiled terrain. User wants to build a structure. He presses build and for each tile there is an "allow" or "disallow" tile sprite added to the scene. FPS drops right away, since there are 600+ tiles added to the screen. Since map equals screen, there is no scrolling. I came to an idea to make an allow grid covering the whole map and mask the disallow fields. Approach 1: Create allow and disallow grid textures. Draw a polygon on screen. Pass both textures to the fragment shader. Determine the position inside the polygon and use color from allowTexture if the fragment belongs to the allow field, disallow otherwise Problem: How do I know if I'm on the field that isn't allowed if I cannot pass the matrix representing the map (enum FieldStatus[][] (Allow / Disallow)) to the shader? Therefore, inside the shader I don't know which fragments should be masked. Approach 2: Create allow texture. Create an empty texture buffer same size as the allow texture Memset the pixels of the empty texture to desired color for each pixel that doesn't allow building. Draw a polygon on screen. Pass both textures to the fragment shader. Use texture2 color if alpha 0, texture1 color otherwise. Problem: I'm not sure what is the right way to manipulate pixels on a texture. Do I just make a buffer with width*height*4 size and memcpy the color[] to desired coordinates or is there anything else to it? Would I have to call glTexImage2D after every change to the texture? Another problem with this approach is that it takes a lot more work to get a prettier effect since I'm manipulating the color pixels instead of just masking two textures. varying vec2 TexCoordOut; uniform sampler2D Texture1; uniform sampler2D Texture2; void main(void){ vec4 allowColor = texture2D(Texture1, TexCoordOut); vec4 disallowColor = texture2D(Texture2, TexCoordOut); if(disallowColor.a > 0){ gl_FragColor= disallowColor; }else{ gl_FragColor= allowColor; }} I'm working with OpenGL on Windows. Any other suggestion is welcome.

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >