Search Results

Search found 8089 results on 324 pages for 'auto completion'.

Page 67/324 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >

  • How do I change the background colour of Leafpad?

    - by Lao Tzu
    All the information that google returns says to change ~/.gtkrc2.0-mine. Here is my .gtkrc-2.0: # -- THEME AUTO-WRITTEN BY gtk-theme-switch2 DO NOT EDIT include "/usr/share/themes/Dust/gtk-2.0/gtkrc" include "/home/mars/.gtkrc-2.0.mine" # -- THEME AUTO-WRITTEN BY gtk-theme-switch2 DO NOT EDIT Here is my .gtkrc-2.0.mine: style "default" { GtkTextView::cursor_color = "#ffffff" base[NORMAL] = "#111111" base[ACTIVE] = "#111181" base[SELECTED] = "#808080" text[NORMAL] = "#c0c0c0" text[ACTIVE] = "#c0c0c0" text[SELECTED] = "#111111" } class "GtkTextView" style "default" Still appears with a white background!

    Read the article

  • C++11 Tidbits: Decltype (Part 2, trailing return type)

    - by Paolo Carlini
    Following on from last tidbit showing how the decltype operator essentially queries the type of an expression, the second part of this overview discusses how decltype can be syntactically combined with auto (itself the subject of the March 2010 tidbit). This combination can be used to specify trailing return types, also known informally as "late specified return types". Leaving aside the technical jargon, a simple example from section 8.3.5 of the C++11 standard usefully introduces this month's topic. Let's consider a template function like: template <class T, class U> ??? foo(T t, U u) { return t + u; } The question is: what should replace the question marks? The problem is that we are dealing with a template, thus we don't know at the outset the types of T and U. Even if they were restricted to be arithmetic builtin types, non-trivial rules in C++ relate the type of the sum to the types of T and U. In the past - in the GNU C++ runtime library too - programmers used to address these situations by way of rather ugly tricks involving __typeof__ which now, with decltype, could be rewritten as: template <class T, class U> decltype((*(T*)0) + (*(U*)0)) foo(T t, U u) { return t + u; } Of course the latter is guaranteed to work only for builtin arithmetic types, eg, '0' must make sense. In short: it's a hack. On the other hand, in C++11 you can use auto: template <class T, class U> auto foo(T t, U u) -> decltype(t + u) { return t + u; } This is much better. It's generic and a construct fully supported by the language. Finally, let's see a real-life example directly taken from the C++11 runtime library as implemented in GCC: template<typename _IteratorL, typename _IteratorR> inline auto operator-(const reverse_iterator<_IteratorL>& __x, const reverse_iterator<_IteratorR>& __y) -> decltype(__y.base() - __x.base()) { return __y.base() - __x.base(); } By now it should appear be completely straightforward. The availability of trailing return types in C++11 allowed fixing a real bug in the C++98 implementation of this operator (and many similar ones). In GCC, C++98 mode, this operator is: template<typename _IteratorL, typename _IteratorR> inline typename reverse_iterator<_IteratorL>::difference_type operator-(const reverse_iterator<_IteratorL>& __x, const reverse_iterator<_IteratorR>& __y) { return __y.base() - __x.base(); } This was guaranteed to work well with heterogeneous reverse_iterator types only if difference_type was the same for both types.

    Read the article

  • Optimizing Transaction Log Throughput

    As a DBA, it is vital to manage transaction log growth explicitly, rather than let SQL Server auto-growth events "manage" it for you. If you undersize the log, and then let SQL Server auto-grow it in small increments, you'll end up with a very fragmented log. Examples in the article, extracted from SQL Server Transaction Log Management by Tony Davis and Gail Shaw, demonstrate how this can have a significant impact on the performance of any SQL Server operations that need to read the log.

    Read the article

  • Storage device manger regarding NTFS automount at boot time

    - by muneesh
    I am using storage device manager to auto-mount NTFS file system at boot time.But repeatedly, I am trying to uncheck the checkbox listed 'read only mode' in assistant option of storage device manager. I am not able to to auto-mount my NTFS partition in read/write mode. Please suggest a solution regarding this problem? Remember I am repeatedly trying to uncheck read only checkbox but not able to do that!

    Read the article

  • Install Script Question

    - by Michael Dobbins
    Sorry if this has been discussed, wasn't sure what to use to search for the particular question I had. I'm installing sickrage and couchpotato and headphones, and will be doing multiple installs I made a small batch script just to install everything but what I don't know how to do is automatically make them auto start on boot. Since they all require a file to be created I do not know how to make this file auto create and populate what needs to be put into it.

    Read the article

  • Optimizing Transaction Log Throughput

    As a DBA, it is vital to manage transaction log growth explicitly, rather than let SQL Server auto-growth events "manage" it for you. If you undersize the log, and then let SQL Server auto-grow it in small increments, you'll end up with a very fragmented log. This article demonstrates how this can have a significant impact on the performance of any SQL Server operations that need to read the log.

    Read the article

  • Oracle EBS?????(Order->AR)

    - by Pan.Tian
    ???? ??:Order Management > Orders,Returns > Sales Orders ???????,??,????,???? ???????,????,??... ??Book Order,??Book??,????????Status??????“Booked”,???????"Awaiting Shipping",?????????,??????????????? ??:??Book??,????????????,????Shipping Transactions Form,????,?????????Line Status?Ready to Release,Next Step?Pick Release Pick Release ??:Order Management > Shipping > Release Sales Orders > Release Sales Orders Pick Release????(?????????).?Order  Number?????????? Auto Pick Confirm???No Auto Allocate???N Auto Allocate?Auto Pick Confirm??????Yes,???????????,??????No,???Yes??,?????Allocate?Pick Confirm??,??????????? ??????????Pick  Release,”Concurrent“??Pick Release?????Concurrent Request???,"Execute Now"????????Pick Release,??????????????User,??????Concurrent??? Pick Release?????????Pick Release?????Pick Wave??Move Order,??Move Order????????????????????(Staging),????INV??????????? INV_MOVE_ORDER_PUB.CREATE_MOVE_ORDER_HEADER???Move Order??(??Pick Release?????????????:Pick Release Process) ????????,?Pick Release??,?????????????Reservation(??),?????????Soft Reservations,?????????????,????Org?????????? ??:????,Shipping Transaction?Line Status?"Released to Warehouse",Next Step?"Transact Move Order";????????Booked,?????”Awaiting Shipping“? Pick Confirm Pick Confirm(????)????????Transact Move Order????,?Allocate????,?Transact Move Order. ??:Inventory > Move Orders > Transact Move Orders ????,Pick Wave??Tab,????? ??TMO????,??Allocate,Allocate?????????Picking Rule?????,??????Suggestion????,Suggestion?????? MTL_MATERIAL_TRANSACTIONS_TEMP?(?Pending Transactions)? ????Allocate??,??????Allocation????Single,Multiple??None???,Single??, ??????????Suggestion?Transaction??,Multiple???????;None??????Suggestion? ?(????????????????) ????????Transact??Move Order ?Transact??,Inventory Transaction Manager ???Suggestion Transactions(MMTT),???????????????,??????Subinventory??????(Staging)??? Transction???Material Transaction?Form????? ????Reservation??,?Transact??,???????,Reservation????????,????Sub,locator???? ??:????,Shipping Transaction?Line Status?"Staged/Pick Confirmed",Next Step?"Ship Confirm/Close Trip Stop";????????Booked,??????”Picked“? Ship Confirm Deliveries ??:Order Management > Shipping > Transactions ???Delivery??,??Ship Confirm(????),????Pick Release???,????Autocreate Delivery,???????Define Shipping Parameters????????,??shipping parameters???????,?????????Ship Confirm?????Action->Auto-create Deliveries. Delivery????????????????,????????.... Delivery??,??Ship Confirm???,???????,"Defer Interface"?????,?????????Interface Trip Stop SRS,????Defer Interface,?OK? Delivery was successfully confirmed!!! Ship Confirm????????????MTL_TRANSACTIONS_INTERFACE??,??MTI??????Sales Order Issue,??????????Interface Trip Stop???,???MTI??MMT??? ??:????,Shipping Transaction?Line Status?"Shipped",Next Step?"Run Interfaces";????????Booked,??????”Shipped“? Interface Trip Stop - SRS ?????Ship Confirm??????Defer Interface,??????????????Interface Trip Stop - SRS? ??:Order Management > Shipping > Interface > Run > Request:Interface Trip Stop - SRS Interface Trip Stop????????:Inventory Interface  SRS(????????)? Order Management Interface  SRS(?????????????AR??)? Inventory Interface  SRS???Shipping Transaction??????MTI,??INV Manager????MTI????MMT??,??Sales Order Issue?transaction??????,???????????Reservation????Inventory Interface  SRS?????,???WSH_DELIVERY_DETAILS??INV_INTERFACED_FLAG???Y? Order Management Interface - SRS??Inventory Interface  SRS?????,??Request?????????????AR??,OM Interface????????WSH_DELIVERY_DETAILS??OE_INTERFACED_FLAG?Y? ??:????,Shipping Transaction?Line Status?"Interfaced",Next Step?"Not Applicable";????????Booked,??????”Shipped“? Workflow background Process ??:Inventory > Workflow Background Engine Item Type:OM Order Line Process Deferred:Yes Process Timeout:No ??program????Deffered???workflow,Workflow Background Process???,???????Order????RA Interface???(RA_INTERFACE_LINES_ALL,RA_INTERFACE_SALESCREDITS_ALL,RA_Interface_distribution) ????????SQL???RA Interface??: 1.SELECT * FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961'; 2.SELECT * FROM RA_INTERFACE_SALESCREDITS_ALL WHERE INTERFACE_LINE_ID IN (SELECT INTERFACE_LINE_ID FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961' ); 3.SELECT * FROM RA_INTERFACE_DISTRIBUTIONS_ALL WHERE INTERFACE_LINE_ID IN (SELECT INTERFACE_LINE_ID FROM RA_INTERFACE_LINES_ALL WHERE sales_order = '65961' ); ?????RA Interface??,??OE_ORDER_LINES_ALL?INVOICE_INTERFACE_STATUS_CODE????? Yes,INVOICED_QUANTITY?????????????????????????Closed,????????Booked? AutoInvoice ????AR?? ??:Account Receivable > Interface > AutoInvoice Name:Autoinvoice Master Program Invoice Source:Order Entry Default Day:???? ???,?request????”Autoinvoice Import Program“???? ???,????Auto Invoice Program????RA?interface?,?????????????,???????AR???? (RA_CUSTOMER_TRX_ALL,RA_CUSTOMER_TRX_LINES,AR_PAYMENT_SCHEDULES). ?????? Order > Action > Additional Information > Invoices/Credit Memos????????,???????SQL?????AR??, SELECT ooha.order_number , oola.line_number so_line_number , oola.ordered_item , oola.ordered_quantity * oola.unit_selling_price so_extended_price , rcta.trx_number invoice_number , rcta.trx_date , rctla.line_number inv_line_number , rctla.unit_selling_price inv_unit_selling_price FROM oe_order_headers_all ooha , oe_order_lines_all oola , ra_customer_trx_all rcta , ra_customer_trx_lines_all rctla WHERE ooha.header_id = oola.header_id AND rcta.customer_trx_id = rctla.customer_trx_id AND rctla.interface_line_attribute6 = TO_CHAR (oola.line_id) AND rctla.interface_line_attribute1 = TO_CHAR (ooha.order_number) AND order_number = :p_order_number; ??Autoinvoice Import Program???error???,?????RA_INTERFACE_ERRORS_ALL?Message_text??,???????? Closing the Order ?????????,?????????(Close??Cancel)?0.5?,??????Workflow Background Process??????? ????????:you can wait until month-end and the “Order Flow – Generic” workflow will close it for you. Order&Shipping Transactions Status Summary Step Order Header Status Order Line Status Order Flow Workflow Status (Order Header) Line Flow Workflow Status (Order Line) Shipping Transaction  Status(RELEASED_STATUS in WDD) 1. Enter an Order Entered Entered Book Order Manual Enter – Line                              N/A 2. Book the Order Booked Awaiting Shipping Close Order Schedule ->Create Supply ->Ship – Line                       Ready to Release(R) 3. Pick the Order Booked Picked Close Order Ship – Line 1.Released to Warehouse(S)(Pick Release but not pick confirm) 2.Staged/Pick Confirmed(Y)(After pick confirm) 4. Ship the Order Booked Shipped Close Order Fulfill – Deferred 1.Shipped(After ship confirm) 2.Interfaced(C)(After ITS) Booked Closed Close Order Fulfill ->Invoice Interface ->Close Line -> End 5. Close the Order Closed Closed End End ????,shipping txn???,??????????:http://blog.csdn.net/pan_tian/article/details/7696528 ======EOF======

    Read the article

  • Syntax Recognition for XML-Based Languages in Oracle JDeveloper

    - by Ramkumar Menon
      @Thanks Jeffrey Stephenson If you are looking at using any one of the new XML Based languages, lets say a docbook xml, or xproc, or what not, you can make use of JDeveloper's syntax highlighting and completion insight feature to ease out those extra keystrokes. All you need is a URL/local copy of the XML Schema for the language. Once you have, you can register it via Tools --> Preferences --> XML Schemas.   Remember to provide a new extension name [Using a default .xml extension did not work for me.] I provided my own extension .dbk for my docbook files. Once you save these settings, you can create new files that conform to the schema, and you get validation/completion insight/prompting for free.      

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Draggable & Resizable Editors

    - by Geertjan
    Thanks to a cool tip from Steven Yi (here in the comments to a blog entry), I was able to make a totally pointless but fun set of draggable and resizable editors: What you see above are two JEditorPanes within JPanels. The JPanels are within ComponentWidgets provided by the NetBeans Visual Library, which is also where the special border comes from. The ComponentWidgets are within a Visual Library Scene, which is within a JScrollPane in a TopComponent. Each editor has this, which means the NetBeans Java Editor is bound to the JEditorPane: jEditorPane1.setContentType("text/x-java"); EditorKit kit = CloneableEditorSupport.getEditorKit("text/x-java"); jEditorPane1.setEditorKit(kit); jEditorPane1.getDocument().putProperty("mimeType", "text/x-java"); A similar thing is done in the other JEditorPane, i.e., it is bound to the XML Editor. While the XML Editor also has code completion, in addition to syntax coloring, as can be seen above, this is not the case for the JEditorPane bound to the Java Editor, since the JEditorPane doesn't have a Java classpath, which is needed for Java code completion to work.

    Read the article

  • ANTLRWorks 2: Early Access Preview 10

    - by Geertjan
    I took a quick look at how the ANTLRWorks 2 project is getting on... and discovered that today, March 23, the new early access preview 10 has been released: http://www.antlr.org/wiki/display/ANTLR4/1.+Overview Downloaded it immediately and was impressed when browsing through the Java.g file that I also found on the Antlr site: (Click to enlarge the image above.) On the page above, the following enhancements are listed: Add tooltips for rule references Finally fixed the navigator update bug Major improvements to code completion Fix legacy mode Many performance and stability updates I've blogged before about how the developers on the above project consider their code completion to be "scary fast". Some discussions have taken place about how code developed by the ANTLRWorks team could be contributed to the NetBeans project, since NetBeans IDE and ANTLRWorks 2 are both based on the NetBeans Platform.

    Read the article

  • Maintenance Wizard

    - by LuciaC
    The Maintenance Wizard is an E-Business Suite upgrade tool that can guide you through the code line upgrade process from 11.5.10.2 to 12.1.3 with an 11gR2 database. Additionally, it includes maintenance features for most releases of E-Business Suite applications. The Tool: Presents step-by-step upgrade and maintenance processes Enables validation of each step, tracks the completion of the steps, and maintains a log and status Is a multi-user tool that enables the System Administrator to give different users assignments based on any combination of category, product family or task Automatically installs many required patches Provides project management utilities to record the time taken for each task, completion status and project reporting For More Information:Review Doc ID 215527.1 for additional information on the Maintenance Wizard.See Doc ID 430732.1 to download the new Patch.

    Read the article

  • Debian Linux bridging router intermittently dropping packets [migrated]

    - by nomen
    My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Can anybody help?

    Read the article

  • How can I use two Internet connections in Ubuntu?

    - by Martin
    My goal is to be able to do something like this: curl google.com --interface ppp0 curl google.com --interface p2p2 ppp0 is a DSL connection, and p2p2 is a separate direct Internet connection. Currently I can only get one of these to work at a time. When I enable one, the other one stops working. /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # DSL auto p2p1 iface p2p1 inet manual auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig p2p1 up # line maintained by pppoeconf provider dsl-provider # DIRECT auto p2p2 iface p2p2 inet dhcp ifconfig: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 p2p1 Link encap:Ethernet inet6 addr: fe80::20a:ebff:fe21:99c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 p2p2 Link encap:Ethernet inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20a:ebff:fe17:1249/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ppp0 Link encap:Point-to-Point Protocol inet addr:53.193.231.167 P-t-P:53.193.224.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 10.0.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 53.193.224.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 p2p2 By default, only ppp0 works. If I run "route add default gw 192.168.1.1 p2p2" then I can use p2p2 but ppp0 stops working. If I then run "route add default gw 53.193.224.1 ppp0" then I can use ppp0 again but p2p2 stops working. What can I do to be able to use both interfaces selectively?

    Read the article

  • How to install DBD::mysql on OS X Server 10.6?

    - by Zoran Simic
    Trying to install DBD::mysql on OS X Server 10.6 (mac mini server). But I'm missing the mysql headers apparently. Since mysql is already part of OS X Server 10.6, I would like to NOT install anything else (no fink or darwin ports installs), just whatever's needed to get DBD::mysql installed and working. Do you know how I could do that? Do I have to install the headers somewhere? And if so, where? (again: I don't want to install another version of mysql on the box, want to use the version it came with). Is there a way to install DBD::mysql without compiling any C files? This is the error I get (the actual error is much longer, but these are the most meaningful bits, this is the first error reported). Checking if your kit is complete... Looks good Unrecognized argument in LIBS ignored: '-pipe' Note (probably harmless): No library found for -lmysqlclient Multiple copies of Driver.xst found in: /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level/auto/DBI/ at Makefile.PL line 907 Using DBI 1.611 (for perl 5.010000 on darwin-thread-multi-2level) installed in /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ Writing Makefile for DBD::mysql cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm gcc-4.2 -c -I/Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI -I/usr/include -fno-omit-frame-pointer -pipe -D_P1003_1B_VISIBLE -DSIGNAL_WITH_VIO_CLOSE -DSIGNALS_DONT_BREAK_READ -DIGNORE_SIGHUP_SIGQUIT -DDBD_MYSQL_INSERT_ID_IS_GOOD -g -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -Os -DVERSION=\"4.014\" -DXS_VERSION=\"4.014\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" dbdimp.c In file included from dbdimp.c:20: dbdimp.h:22:49: error: mysql.h: No such file or directory dbdimp.h:23:45: error: mysqld_error.h: No such file or directory dbdimp.h:25:49: error: errmsg.h: No such file or directory

    Read the article

  • Windows 7 task bar stuck in hiding, how to fix?

    - by Rainer Blome
    In Windows 7, I use the "Auto-hide the task bar" feature. Usually, it works fine: As soon as the pointer touches the screen bottom, the task bar pops up. However sometimes, it refuses to rise. Pressing the "Windows" key (or Ctrl-ESC) makes the start menu appear, forcing the task bar from hinding as well. Once I've done this, the task-bar auto-rises again. This is annoying, it interrupts flow. Has anyone else noticed this? How do I avoid this? Searching for "Windows 7 task bar auto-raise" shows that at least one other person experienced this problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-can-i-fix-the-taskbars-auto-hide/8cdf6369-7354-4d29-9249-b7096ed0e28b?msgId=6dac3361-9d0f-4a9e-8642-b91a72826ba4 To answer the question posed by the "helpful" support engineer on the above page, of course I am running some apps when this happens, usually Explorer, Firefox, Eclipse, Cygwin/X, Xterm, Emacs, Notes, VPN client, Firewall. If my memory serves correctly, I have seen this behavior on earlier versions of Windows as well, XP at least. To reproduce this behavior, I tried switching between apps, and bringing apps to open other windows. I am unable to reproduce this behavior so far. So far, it appears to happen out of the blue, sometimes multiple times a day. Looks like a bug to me. The task bar should raise no matter what.

    Read the article

  • How to resolve virtual disk degraded in Windows Server 2012

    - by harrydev
    I am using the new Storage Spaces feature in Windows Server 2012. I have the following disks: FriendlyName CanPool OperationalStatus HealthStatus Usage Size ------------ ------- ----------------- ------------ ----- ---- PhysicalDisk2 False OK Healthy Auto-Select 2.73 TB PhysicalDisk3 False OK Healthy Auto-Select 2.73 TB PhysicalDisk4 False OK Healthy Auto-Select 2.73 TB PhysicalDisk5 False OK Healthy Auto-Select 2.73 TB There is also a separate OS disk. The above disks are part of a single storage pool: FriendlyName OperationalStatus HealthStatus IsPrimordial IsReadOnly ------------ ----------------- ------------ ------------ ---------- Pool OK Healthy False False Within this storage pool some virtual disks are defined, see below: FriendlyName ResiliencySettingNa OperationalStatus HealthStatus IsManualAttach Size me ------------ ------------------- ----------------- ------------ -------------- ---- Docs Mirror OK Healthy False 500 GB Data Mirror Degraded Warning False 500 GB Work Mirror Degraded Warning False 2 TB Now the virtual disks are all running normal 2-way mirror, but two of the virtual disks are degraded. This is probably because one of the physical disks was offline for a short period of time. However, now the virtual disk cannot be repaired, even though, all physical disks are healthy. There is plenty of available space in the storage pool. This I cannot understand so I was hoping for some help, on how to resolve this? Below I have listed the full output from the Get-VirtualDisk CmdLet for the "Work" disk: ObjectId : {XXXXXXXX} PassThroughClass : PassThroughIds : PassThroughNamespace : PassThroughServer : UniqueId : XXXXXXXX Access : Read/Write AllocatedSize : 412316860416 DetachedReason : None FootprintOnPool : 824633720832 FriendlyName : Work HealthStatus : Warning Interleave : 262144 IsDeduplicationEnabled : False IsEnclosureAware : False IsManualAttach : False IsSnapshot : False LogicalSectorSize : 512 Name : NameFormat : NumberOfAvailableCopies : 0 NumberOfColumns : 2 NumberOfDataCopies : 2 OperationalStatus : Degraded OtherOperationalStatusDescription : OtherUsageDescription : Disk for data being worked on (not backed up) ParityLayout : PhysicalDiskRedundancy : 1 PhysicalSectorSize : 4096 ProvisioningType : Thin RequestNoSinglePointOfFailure : True ResiliencySettingName : Mirror Size : 2199023255552 UniqueIdFormat : Vendor Specific UniqueIdFormatDescription : Usage : Other PSComputerName :

    Read the article

  • Routing / binding 128 IPs to one server

    - by Andrew
    I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Update: I removed the gateway and now it works. I can reach the website thru all 128 ip's. But when I try to bind a socket connection in php to a specific ip I get no answer. socket_bind($sock, "xx.xxx.xx.xxx"); socket_connect($sock, 'google.com', 80); I tryed to use a sniffer to see the packets, and I see the packet sent from binded ip to google.com but the "connection" can't be established. I don't know anything about "route" command, but I have a feeling that this is the solution.

    Read the article

  • Need info on scripts and Autoforward through Exchange Server in Outlook 2010

    - by user103037
    I am using the below information to auto-forward my work emails to my BB via a gmail account. The script works fine. But my work email ask's for every email to send either classifield or unclassified. What and where would I add into the below script to autoforward unclassified? I have written some VBA script to do this bypass the server's disabling of auto-forward. Basically it mimics the user forwarding the email rather than the server doing an auto-forward. It's pretty simple: Sub AutoForwardAllSentItems(Item As Outlook.MailItem) Dim strMsg As String Dim myFwd As Outlook.MailItem Set myFwd = Item.Forward myFwd.Recipients.Add "[email protected]" myFwd.Send Set myFwd = Nothing End Sub It's beyond the scope of this post to give detailed instructions, but here's a summary: Add the above code in the Visual Basic editor of Outlook (Alt-F11 should get your started). Be sure to change [email protected] to the address where you want the mail to go Tell Outlook to run this code for each inbound message (Tools - Rules and Alerts - New Rule - Check Messages when they arrive - Next - YES - Checkbox "Run a Script" - Then select the script you just created. Now Outlook should automatically forward each email you receive, but it won't be blocked by the Admin as an "Auto-forward".

    Read the article

  • IPTABLE & IP-routed netwok solution for HOST net and VM's subnet

    - by Daniel
    I've got ProxmoxVE2.1 ruled KVM node on Debian and bunch of VM's guests machine. That is how my networking looks like: # network interface settings auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 175.219.59.209 gateway 175.219.59.193 netmask 255.255.255.224 post-up echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp And I've got two working subnet solution auto vmbr0 iface vmbr0 inet static address 10.10.0.1 netmask 255.255.0.0 bridge_ports none bridge_stp off bridge_fd 0 post-up ip route add 10.10.0.1/24 dev vmbr0 This way I can reach internet, to resolve outside hosts, update and download everything I need but can't reach one guest VM out of any other VM's inside my network. The second solution allows me to communicate between VM's: auto vmbr1 iface vmbr1 inet static address 10.10.0.1 netmask 255.255.255.0 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.10.0.0/24' -o vmbr1 -j MASQUERADE I can even NAT internal addresses: -t nat -I PREROUTING -p tcp --dport 789 -j DNAT --to-destination 10.10.0.220:345 My inexperienced mind is ready to double VM's net adapters: one for the first solution and another - for second (with slightly different adresses) but I'm pretty sure that it's a dumb way to resolve the problem and everything can be resolved via iptables/ip route rules that I can't create. I've tried a dozen of "wizard manuals" and "howto's" to mix both solution but without success. Looking for an advice (and good reading links for networking begginers).

    Read the article

  • Ubuntu IP Configuration - multiple subnets & interfaces

    - by HaydnWVN
    Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

    Read the article

  • Router intermittently failing

    - by nomen
    My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

    Read the article

  • VirtualBox with Ubuntu Server guest can't ping outside

    - by Danidan
    Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

    Read the article

  • Office 2010 Trust Center settings: How to enable data connections in the "old" way?

    - by GSerg
    We're planning an upgrade Office 2003 - 2010 and have identified a big problem. In Office 2003, if the workbook you're opening contains a query table that fetches data from a data source automatically (upon file open or in certain intervals), then a security dialog pops up - whether you want to allow that. If you say Yes, the queries will refresh automatically when they need to. If you say No, the queries will not refresh automatically, neither on file open nor on time intervals, but you will be able to refresh any of them manually at any time by right-clicking and selecting Refresh. There is also a registry parameter to say, Don't display that dialog, just allow the queries. This is exactly what we want. On users' computers we have the registry parameter applied, so the users never see any dialogs. On developers' computers the parameter is not applied, so every time a file is opened the developer decides whether to allow the auto-refreshing for the current session. Usually the answer is No, because for developing, it is essential to not have quieres refresh when they want to, but instead, refresh them when the developer wants. The problem is that in Office 2010 which we are testing we can't find a way to achieve this functionality: The allow/disallow messages are now grouped into one yellow button, that either allows everything or disallows everything (including, say, macros, if macro security is set to "Disable, but ask"). If you don't click the yellow Allow button, the queries are disabled completely, not just for automatic execution. You cannot right-click and refresh a particular query -- doing that would summon a security dialog prompting for enabling queries, and if you say Yes, all queries in the document will be enabled for auto-execution and will start executing immediately. This sort of ruins our development environment. Is there a way to get the trust thingies in Office 2010 to work in the same way as before? Is there a yet another registry parameter to say, Prompt for auto-refresh, but allow manual refresh even when auto-refresh is disabled?

    Read the article

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74  | Next Page >